Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW E46 Schrick Performance Camshafts

BMW E46 Schrick Performance Camshafts BMW engines are tuned for top-end power - over 4,500 RPM. If you want to maximize the power available you need to change the camshafts. Schrick is a German performance cam manufacturer renowned for their camshaft tuning and engineering. These are top-of-the-line camshafts from a supplier to some of the world's top automotive brands. AVL-Schrick provides tuning and prototyping to some of the most potent and exclusive performance cars in the world and they have long been the source for BMW performance cams. Installing higher lift/longer duration cams improves engine breathing at higher RPM ranges. By opening the valves faster and for longer periods of time you can let more air in. With the proper fuel and timing you can gain a lot more horsepower. Special tuning and setup is generally required to take advantage of the new dynamics. Schrick cams are direct replacements for the stock cams and usually bolt-in with no additional modification or parts required. In some cases, valvetrain upgrades such as springs and retainers are recommended. Turner Motorsport is a direct Schrick distributor for the North American market. Contact us for all of your Schrick needs!
You're currently viewing parts for your (E46) 3-Series 1999-2005. Reset your chassis
For accurate results, specify your model below.
Schrick Camshaft Set - E46 323/328 M52TU - 248/248 M52TU Schrick Camshaft Set. 248 degree 10mm lift intake, 248 degree exhaust. Great for street use. Power gains across the board with calm idle. No need for upgraded valve train. Works perfect for 323 / 328!

BMW Schrick Technical Specs Schrick Technical Information / Specs

This item fits the following BMWs:
1999-2000 E46 BMW 323i 323ci 328i 328ci
1999-2000 E39 BMW 528i
1999-2000 Z3 BMW Z3 2.3 Z3 2.8
Schrick
Part #: E46M52TUSCHRICK
Price: $1078.00 (USD) 
Ships on Sep 19, 2018
Free Shipping Free Shipping
Quantity:   
Schrick Intake Camshaft - E46 M3, MZ3, MZ4 (S54) - 288 Degree, 14.0mm Lift E46 M3 Schrick 288 Degree Intake Camshaft with 14.0mm valve lift. This is only for use in professionally-built E46 M3 race engines. Schrick has developed this ultra-aggressive S54 race cam with 288-deg duration and 14mm of valve lift. Because of the aggressive profile and specs of this cam, Schrick only recommends it be used with special custom pistons with deep valve reliefs. We strongly recommend this be professionally installed by an experienced engine builder to check clearances and fitment.

Schrick also requires valvetrain hardware to go along with this cam:
Schrick valve springs
Schrick rocker arms
Schrick upper and lower retainers

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster, Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster, Z4 M Coupe
Schrick
Part #: TMS201494
Price: $829.00 (USD) 
In Stock
Free Shipping Free Shipping
Schrick Exhaust Camshaft - E46 M3, MZ3, MZ4 (S54) - 272 Degree, 12.5mm Lift E46 M3 Schrick 272 Degree Exhaust Camshaft with 12.5mm valve lift. New rocker arms are required (BMW part #11337833259 or a new Schrick part).

BMW Schrick Technical Specs Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe
Schrick
Part #: TMS11749
Price: $1404.40 (USD) 
In Stock
Free Shipping Free Shipping
Schrick Camshaft Set - E46 M3, MZ3, MZ4 (S54) - 304/296 14mm Lift E46 M3 Schrick high-performance racing camshaft set - 304 degree intake and 296 degree exhaust. These camshafts are for use in professionally-built E46 M3 race engines. Schrick has developed these ultra-aggressive S54 race cams with 14mm of valve lift. Because of the aggressive profile and specs of this cam, Schrick only recommends them be used with no VAN0S and with special custom pistons with deep valve reliefs. We strongly recommend these be professionally installed by an experienced engine builder to check clearances and fitment.

Schrick also requires valvetrain hardware to go along with these cams:
Schrick valve springs
New Schrick or BMW rocker arms
Schrick upper (titanium) and lower (steel) retainers

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster, Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster, Z4 M Coupe
Schrick
Part #: TMS200183
Price: $1658.00 (USD) 
Ships on Sep 18, 2018
Free Shipping Free Shipping
Schrick Intake Camshaft - E46 M3, MZ3, MZ4 (S54) - 288 Degree, 12.5mm Lift E46 M3 Schrick 288 Degree Intake Camshaft with 12.5mm valve lift. Originally desinged for the M3 CSL but works great in a standard M3. A new rocker arm is required (Schrick or new BMW part #11337833259). This is a more agressive cam that the Schrick 280 degree cam that we also offer for the E46M3

BMW Schrick Technical Specs Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe
Schrick
Part #: TMS3572
Price: $1380.40 (USD) 
Ships on Jul 30, 2018
Schrick Exhaust Camshaft - E46 M3, MZ3, MZ4 (S54) - 296 Degree, 12.5mm Lift E46 M3 Schrick 296 Degree Exhaust Camshaft with 12.5mm lift. This cam is much more aggressive than either of the "standard" Schrick exhaust cams. A new rocker arm is required (Schrick or new BMW part #11337833259).

BMW Schrick Technical Specs Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe
Schrick
Part #: 0415A1960-00
Price: $829.00 (USD) 
Ships on Sep 18, 2018
Free Shipping Free Shipping
Schrick Intake Camshaft - E46 M3, MZ3, MZ4 (S54) - 304 Degree, 14.0mm Lift E46 M3 Schrick 304 Degree Intake Camshaft with 14.0mm valve lift. This is only for use in professionally-built E46 M3 race engines. Schrick has developed this ultra-aggressive S54 race cam with 304-deg duration and 14mm of valve lift. Because of the aggressive profile and specs of this cam, Schrick only recommends it be used with no VAN0S or with special custom pistons with deep valve reliefs. We strongly recommend this be professionally installed by an experienced engine builder to check clearances and fitment.

Schrick also requires valvetrain hardware to go along with this cam:
Schrick valve springs
Schrick rocker arms
Schrick upper and lower retainers

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster, Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster, Z4 M Coupe
Schrick
Part #: TMS201493
Price: $829.00 (USD) 
Ships on Sep 18, 2018
E46 M3 Rocker Arm / Cam Follower (Genuine BMW) New rocker arms (cam followers) are required during any new camshaft installation on the S54 engine. Otherwise the original rocker arm will wear the new camshaft lobe unevenly. These are the Original BMW S54 rocker arms and used on the original E46 M3 CSL cams as well. While these are fine for CSL cam upgrades or the Schrick 280/272 cams, the Schrick DLC rocker arms are better all around, especially when used with the more aggressive 288/280 or higher cams.

Priced per rocker.

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster M Coupe
2003-2008 E85 BMW Z4 M Roadster M Coupe
Genuine BMW
Part #: 11337833259
Price: $53.37 (USD) 
$63.56
Limited Qty Sale
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schrick Intake Camshaft - E46 M3, MZ3, MZ4 (S54) - 304 Degree, 12.5mm Lift E46 M3 Schrick 304 Degree Exhaust Camshaft with 12.5mm lift. This cam is much more agressive than the "standard" Schrick intake cams. A new rocker arm is required (Schrick or new BMW part #11337833259).

BMW Schrick Technical Specs Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe
Schrick
Part #: 0415E1040-00
Price: $829.00 (USD) 
Ships on Sep 18, 2018
Free Shipping Free Shipping
Schrick Camshaft Set - E46 M3, MZ3, MZ4 (S54) - 288/280 14mm Lift E46 M3 Schrick high-performance racing camshaft set - 288 degree intake and 280 degree exhaust. These camshafts are for use in professionally-built E46 M3 race engines. Schrick has developed these ultra-aggressive S54 race cams with 14mm of valve lift. Because of the aggressive profile and specs of this cam, Schrick only recommends them be used with special custom pistons with deep valve reliefs. We strongly recommend these be professionally installed by an experienced engine builder to check clearances and fitment.

Schrick also requires valvetrain hardware to go along with these cams:
Schrick valve springs
Schrick rocker arms
Schrick upper (titanium) and lower (steel) retainers

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster, Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster, Z4 M Coupe
Schrick
Part #: TMS200186
Price: $1658.00 (USD) 
Ships on Sep 18, 2018
Free Shipping Free Shipping
Schrick Intake Camshaft - E46 M3, MZ3, MZ4 (S54) - 280 Degree, 12.5mm Lift E46 M3 with S54 engine Schrick 280 Degree Intake Camshaft with 12.5mm valve lift. A new rocker arm is required (Schrick or new BMW part #11337833259).

Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe
Schrick
Part #: TMS11748
Price: $799.50 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Schrick Solid Lifter Conversion Kit (convert Hydraulic Lifters To Solid Lifters) One major hurdle for a track-only car is the limitation of the hydraulic valve lifters in the M50, S50-US, M52, S52-US, M52TU, and M54 engines. These effectively limit your revs to 7200-7300 RPM as the valves 'float' at higher revs, leading to piston-valve contact. By converting to a machined solid lifter, and upgrading other areas of the engine, you can configure the valve train to withstand high RPM running. Not only can you tune for more power, you can help prevent damage during a mild mechanical over-rev.

This kit includes the mechanical spacers to convert hydraulic lifter tappets to solid lifters. The lifter bucket remains in place with the Schrick solid tappet replacing the original. These work on all M50, M52, S50, S52 and M54 engines and were proven in normally aspirated as well as supercharged engines. A custom camshaft is required.

Professional installation and setup is mandatory as these require complete assembly of the head, checking valve lash, then dis-assembly and machining of the Schrick tappet to spec. This kit includes enough spacers for 24 valves. We also carry individual parts, if you are looking for single pieces. This price is for a full set of 24.
Schrick
Part #: 086311700KT
Price: $278.40 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Schrick Exhaust Camshaft - E46 M3, MZ3, MZ4 (S54) - 296 Degree, 14.0mm Lift E46 M3 Schrick 296 Degree Exhaust Camshaft with 14.0mm valve lift. This is only for use in professionally-built E46 M3 race engines. Schrick has developed this ultra-aggressive S54 race cam with 296-deg duration and 14mm of valve lift. Because of the aggressive profile and specs of this cam, Schrick only recommends it be used with no VAN0S or with special custom pistons with deep valve reliefs. We strongly recommend this be professionally installed by an experienced engine builder to check clearances and fitment.

Schrick also requires valvetrain hardware to go along with this cam:
Schrick valve springs
Schrick rocker arms
Schrick upper and lower retainers

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster, Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster, Z4 M Coupe
Schrick
Part #: TMS201492
Price: $2506.70 (USD) 
Ships on Sep 18, 2018
Schrick Exhaust Camshaft - E46 M3, MZ3, MZ4 (S54) - 280 Degree, 12.5mm Lift E46 M3 Schrick 280 Degree Exhaust Camshaft with 12.5mm lift. This was originally desinged for the M3 CSL but works great in the standard M3. This cam is slightly more agressive than the "original" Schrick 272 degree (which we also offer). A new rocker arm is required (Schrick or new BMW part #11337833259).

BMW Schrick Technical Specs Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe
Schrick
Part #: TMS1259
Price: $829.00 (USD) 
Ships on Sep 18, 2018
Free Shipping Free Shipping
E46 M3 Schrick DLC-Coated Rocker Arm / Cam Follower Schrick has developed this high performance rocker arm based on the original factory E46 M3 rocker (cam follower). Schrick coats the contact pad with a DLC coating for reduced friction and improved reliability. The stock S54 rocker arm is un-coated. With more aggressive camshafts there is much higher force and friction on the contact pad which will not only induce more wear on the rocker arm but also lead to higher temperatures and thinning of the oil in a critical spot. The Schrick rocker is preferred over the stock part with any of the more aggressive S54 cams (304/296 or high lift, etc). The DLC coating is extremely hard (DLC = Diamond-Like Coating) but with a graphite content that allows for low friction levels. The DLC coating resists oils and chemicals so it's perfect for an internal part like a cam follower.

New rocker arms are required with any new camshaft installation. Sold per rocker arm.

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster M Coupe
2003-2008 E85 BMW Z4 M Roadster M Coupe
Schrick
Part #: TMS201499
Price: $47.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schrick Intake Camshaft - E46 M3, MZ3, MZ4 (S54) - 288 Degree, 12.5mm Lift E46 M3 Schrick 288 Degree Intake Camshaft with 12.5mm valve lift. Originally desinged for the M3 CSL but works great in a standard M3. A new rocker arm is required (Schrick or new BMW part #11337833259). This is a more agressive cam that the Schrick 280 degree cam that we also offer for the E46M3

BMW Schrick Technical Specs Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe
Schrick
Part #: TMS3572
Price: $829.00 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Schrick Camshaft Set - E46 330, 530, X5 3.0, Z3 3.0 - 264/248 As Used on Project E46 330
Schrick  264   degree (10.5mm lift) intake and  248   degree (10mm lift) exhaust cams provide a power boost at mid-high RPM range without software changes. As used in our 330i ZHP Project Car! These are also available for track / race applications in 272 intake and 256 exhaust durations. We also recommend purchasing  Supertech High Performance Valve Springs   Call us for details. Professional installation required for all Shrick Camshafts.

BMW Schrick Technical Specs Schrick Technical Information / Specs
Schrick
Part #: E46-M54-SCHRICK
Price: $1078.00 (USD) 
Back Ordered, Contact Us
Free Shipping Free Shipping
Quantity:   
Schrick Exhaust Camshaft - E46 M3, MZ3, MZ4 (S54) - 280 Degree, 14.0mm Lift E46 M3 Schrick 280 Degree Exhaust Camshaft with 14.0mm valve lift. This is only for use in professionally-built E46 M3 race engines. Schrick has developed this ultra-aggressive S54 race cam with 280-deg duration and 14mm of valve lift. Because of the aggressive profile and specs of this cam, Schrick only recommends it be used with special custom pistons with deep valve reliefs. We strongly recommend this be professionally installed by an experienced engine builder to check clearances and fitment.

Schrick also requires valvetrain hardware to go along with this cam:
Schrick valve springs
Schrick rocker arms
Schrick upper and lower retainers

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW Z3 M Roadster, Z3 M Coupe
2006-2008 E85 BMW Z4 M Roadster, Z4 M Coupe
Schrick
Part #: TMS201495
Price: $1591.72 (USD) 
Ships on Sep 18, 2018
Free Shipping Free Shipping
Schrick Exhaust Camshaft - E46 M3, MZ3, MZ4 (S54) - 280 Degree, 12.5mm Lift E46 M3 Schrick 280 Degree Exhaust Camshaft with 12.5mm lift. This was originally desinged for the M3 CSL but works great in the standard M3. This cam is slightly more agressive than the "original" Schrick 272 degree (which we also offer). A new rocker arm is required (Schrick or new BMW part #11337833259).

BMW Schrick Technical Specs Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe
Schrick
Part #: TMS1259
Price: $829.00 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Schrick Camshaft Set - E46 M3, MZ3, MZ4 (S54) - 280/272 12.5mm Lift Still looking for more power after bolt-ons? High performance camshafts from Schrick are the way to go. These proved to be an excellent upgrade on our first Project E46 M3 and very similar to the stock E46 M3 CSL cams. Smooth as stock idle with a linear increase in horsepower from midrange all the way to redline. Peak gain was 15hp with no loss in low end torque. The duration of the intake cam is 280 and the exhaust is 272 with 12.5mm valve lift. These are the new "cast" cams from Schrick which require new rocker arms (Schrick or BMW part #11337833859). Professional installation is a must due to the intricacies with the double VAN0S.

BMW Schrick Technical Specs Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe
Schrick
Part #: E46M3SCHRICK
Price: $1628.50 (USD) 
In Stock
Free Shipping Free Shipping
Schrick Camshaft Set - E46 M3, MZ3, MZ4 (S54) - 288/280 12.5mm Lift Still looking for more power after bolt-ons? High performance camshafts from Schrick are the way to go. These cams are a direct replacement for the stock cams and give a solid 15+ horsepower boost at the top end and great midrange torque increases too! More gains can be expected with intake and header upgrades and custom software tuning. A slightly lumpy idle is expected at cold start but will be smooth once at operating temperature. This set is just a great all-around cam upgrade for the S54!

These Schrick cams were initially developed for the M3 CSL but they also work great on the US and other non-CSL S54 engines as well. With more duration they are a great match to high flow headers, no cats, or CSL intake manifold upgrades. These are the new "cast" cams from Schrick which require new rocker arms (Schrick recommended or BMW part #11337833259). Professional installation is a must due to the intricacies with the double VAN0S.

BMW Schrick Technical Specs Schrick Technical Information / Specs

This item fits the following BMWs:
2001-2006 E46 BMW M3
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe
Schrick
Part #: TMS201497
Price: $1658.00 (USD) 
In Stock
Free Shipping Free Shipping
Schrick Camshaft Set - E46 330, 530, X5 3.0, Z3 3.0 - 272/256 As Used on Project E46 330
Schrick  272   degree (10.9mm lift) intake and  256   degree (10.4mm lift) exhaust cams provide a power boost at mid-high RPM range without software changes. We also recommend purchasing  Supertech High Performance Valve Springs   Call us for details. Professional installation required for all Shrick Camshafts.

BMW Schrick Technical Specs Schrick Technical Information / Specs
Schrick
Part #: TMS200185
Price: $1350.00 (USD) 
Ships on Sep 19, 2018
Free Shipping Free Shipping
Quantity: