BMW E46 Body Trim Parts & Accessories

This is the Genuine BMW front door brake assembly. This door brake helps to keep the door from opening or closing too quickly.

This item fits the following BMWs:
1999-6/2000 E46 BMW 323ci 328ci

Road debris has a nasty habit of damaging the panels under the engine compartment. This tray mounts directly under the engine on E46 models with M54/M56 engines.Replace yours with this Genuine BMW part.

This item fits the following BMWs:
2000 E46 BMW 323ci 328ci
3/2001-2005 E46 BMW 325i 330ii
3/2001-2005 E46 BMW 325ci 330ci - with Manaul Transmission
10/2000-2005 E46 BMW 325ci 330ci - with Automatic Transmissoin

This is the black plastic left (drivers) front impact strip on E46 3 series sedan's. The impact strip snaps into place. It can be used on either the stock bumper thru 2001 or the M Aerodynamics Package front bumper (option code P337A or S715A) or the M Technic / ZHP front bumper (option code S716A)

This item fits the following BMWs:
Stock Front Bumper
1999-2001 E46 BMW 323i 325i 325xi 328i 330i 330xi

M Aerodynamics and/or ZHP Front Bumper
1999-2005 E46 BMW 323i 325i 325xi 328i 330i 330xi

Replace the long and ungainly factory antenna mast with this Genuine BMW Sport antenna. This antenna is only 83mm high so it offers a much lower, sleeker appearance. Additionally this short antenna will be much less likely to catch on clothing or other objects.

This item fits the following BMWs:
2008-2013 E88 BMW 128i 135i 135is - convertible
2014+ F23 BMW 228i 228i xDrive M235i Convertible
1999-2005 E46 BMW 323ci 325ci 328ci 330ci M3 - Convertible
1996-2002 E36/7 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster br>2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster
2009+ E89 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Attaches the side door sill and rocker covers to the body of the vehicle.

GENUINE BMW TRIM CLAMP 51718184574

This is the black plastic left (drivers) front impact strip on E46 3 series sedan's from 2002-2005, The impact strip snaps into place. Not for M Aerodynamics or M Technic bumper.

This item fits the following BMWs:
Stock Front Bumper
2002-2005 E46 BMW 325i 325xi 330i 330xi

This is the Genuine BMW trunk lid lock assembly with micro switch for many BMW's.

This item fits the following BMWs:
2008+ E82 BMW 128i 135i 135is 1M Coupe
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
2004-2010 E63 BMW 645ci 650i M6
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

Polycarbonate windows are an easy way to save 50% weight in comparison to stock window glass. HARD Motorsport's rear windows are abrasive resist and provides protection against chemicals and UV yellowing and hazing. Also, 3M vinyl is used around the edges in order to keep an OEM Factory look. These windows are designed to be used with original window gaskets.

Priced as a pair.

**Does not include window mounting hardware**

Fits the following vehicles:

E46 BMW All 2 Door Coupe sub-models

This is the Genuine BMW left rear vent window gasket. It is black in color.

This item fits the following BMWs:
1999-2006 E46 BMW 323ci 325ci 328ci 330ci M3 - Coupe

This is the Genuine BMW front fender liner / splash guard that contains the opening for the brake duct for E46 M3. These plastic components are notorious for cracking over time. Replace your's today with this Genuine BMW unit.

This item fits the following BMWs:
2001-2006 E46 BMW M3

This is the center black plastic front impact strip with Euro license plate bracket on E46 3 series sedan's. The impact strip snaps into place.

This item fits the following BMWs:
Stock Front Bumper
1999-2001 E46 BMW 323i 325i 325xi 328i 330i 330xi

AC Schnitzer Side grille emblem, set - E46 M3 

Schnitzer got it's start racing BMW's in 1967 and has since gone onto win many championships in DTM, WTCC and other touring car series. In 1987 AC Schnitzer started manufacturing custom high performance products for BMW's using their knowledge from years of racing and winning with BMW's. AC Schnitzer offers the highest quality components for your BMW.

This item fits the following BMWs:
2001-2006 E46 BMW M3

Installation instructions

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

• Proprietary methods to lay wet carbon for a stronger and lighter product
• UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
• Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
• No black paint is used to hide imperfections along detail edges and creases.
• Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2001 - 2006 E46 M3

Our carbon fiber b-pillars are precision cut and protected with UV resistant gel coating - the finish will not deteriorate over time with rain or sun exposure. Woven with Grade A Carbon Fiber. Install is extremely simple and takes only minutes to install.

This product fits the following BMWs:
1998 - 2001 E46 323ci 325ci 330ci M3 
2002 - 2006 E46 325ci 330ci

Genuine BMW Expanding Nut
This item fits the following BMW Chassis:
E46 M3,E70 X5M,E71 X6M,E46,E65,E70 X5,E71 X6,E83 X3,E89 Z4,F01,F02,F06,F10,F12,F13,F25 X3,F26 X4 X4

Replace your missing fog light trim ring with this Genuine BMW part. This trim ring will only work on cars with the M-Tech / ZHP front bumper. This is for the Right (Passenger) Side.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi

Side Window Deflectors are custom fit, in-window-channel, rain and debris guards that allow fresh air to enter and leave the vehicle while having the window still cracked during harsh climates. Side Window Deflectors also help reduce wind noise and allow interior heat to escape.

Weathertech has made a name for themselves for having the highest-quality products with the best customer service they can offer. Proudly manufactured in America, they hold very tight engineering tolerances to allow a perfect fit in every application. With a product range from TechShade® (windshield sun shades), to trunk mats, and their world-famous laser measured floor liners, Weathertech has the products you're looking for!

Has the driver side door lock cover disappeared from your E46? Replace it with this Genuine BMW part. The cover comes primed ready to paint and snaps into place.

This item fits the following BMWs:
1999-2000 E46 BMW 323i 323ci 328i 328ci

These hood vents were designed to improve  the cooling system while providing front downforce by evacuating high pressure air under the hood.

Water temperatures can drop as much as 15 degrees. 

Package includes:

• (2) E46  side hood vents
• Full set of installation instructions
• (25) 1/8' aluminum pop rivets in black
• Cutting templates for above and below hood installation

*Professional installation is recommended* 

Replace your missing fog light trim ring with this Genuine BMW part. This trim ring will only work on cars with the M-Tech / ZHP front bumper. This is for the Left (driver) Side.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi

This is the Genuine BMW front door brake assembly. This door brake helps to keep the door from opening or closing too quickly.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 325i 325xi 328i 330i 330xi

Your floor jack is universal but it doesn't have to be with this adapter! Most newer BMW jack pads have an open recess inside that this adapter fits into. It's a rectangular peg for a rectangular hole. This gives the jack a much more rigid connection and almost impossible for the jack or pad to slip. You will never have to worry about scratching your rocker panels or jacking from the wrong spot - the positive connection ensures you are always lifting from the correct location. This adapter is one of those small hidden gems that you can't live without! 

Made of black anodized aluminum for added strength and corrosion resistance, the adapter fits the head of most hydraulic floor jacks, including the Schwaben Low Boy.

Compatible with most BMW jack pads for chassis E39 and up. Retrofitting jack pads is common, especially on E36/Z3 models.

This is the Genuine BMW front fender liner / splash guard that contains the opening for the brake duct for E46 M3. These plastic components are notorious for cracking over time. Replace your's today with this Genuine BMW unit.

This item fits the following BMWs:
2001-2006 E46 BMW M3

This headlight trim is the cover at the top of e46 3 series sedan / wagon headlights. This is for the left /driver side.

This item fits the following BMWs:
1999-2001 E46 BMW 323i 325i 325xi 328i 330i 330xi

The purpose of fender vents is to reduce lift on the front axle and drag from the front wheel well area. Until now,only expensive fiberglass/carbon fiber fenders where available to add vents to your fenders. 

During testing data acquisition systems showed an average increase of .1G in high speed braking zones.

 

 Front fender vent features:

• Reduces drag and increases front downforce
• Form fitting design that integrates with the body lines of the E46 M3
• Easy DIY installation
• Instructions, cutting templates, and installation hardware included

Genuine BMW Covering Left
This item fits the following BMW Chassis:
E46 M3,E46

Side Window Deflectors are custom fit, in-window-channel, rain and debris guards that allow fresh air to enter and leave the vehicle while having the window still cracked during harsh climates. Side Window Deflectors also help reduce wind noise and allow interior heat to escape.

Weathertech has made a name for themselves for having the highest-quality products with the best customer service they can offer. Proudly manufactured in America, they hold very tight engineering tolerances to allow a perfect fit in every application. With a product range from TechShade® (windshield sun shades), to trunk mats, and their world-famous laser measured floor liners, Weathertech has the products you're looking for!

This is a Genuine BMW alarm system hood sensor. This switch is mounted under the hood and will activate the alarm if the hood is opened with the alarm armed.

This item fits the following BMWs:
1996-2002 E36/7 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
1995-2001 E38 BMW 740i 740il 750il
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2000-2006 E53 BMW X5 3.0i X5 4.4i X5 4.6is X5 4.8is
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
2004-2010 E63 BMW 645ci 650i M6
2002-2008 E65 BMW 745i 745li 750i 750li 760i 760li
2008-2013 E82 BMW 128i 135i 135is 1M Coupe
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2013+ E84 BMW X1 sDrive28i X1 xDrive28i X1 xDrive35i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2013 E93 BMW 328i 335i 335is M3 - Convertible

This is the small rectangular cover that mounts in the front bumper that covers the tow hook opening. This unit fits the M-technic front bumper on E46 Sedan's and Wagons from 1999-2005. It does not fit the Standard or Sport Aerodynamic Package front bumper. This item is unpainted. It needs to be painted to match your exterior color.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 325i 325xi 328i 330i 330xi

This Genuine BMW splash panel provides a transition from the spoiler to the front of the wheel well and has an opening for a brake duct.

This item fits the following BMWs:
1999-2005 E46 BMW 325xi 330xi
Only for cars with factory Aerodynamic Package option code S716A:
1999-2005 E46 BMW 323i 325i 328i 330i

This Genuine BMW hood release cable connects the release handle on the drivers side kick panel to the release mechanism by the center grills. A stretched or broken cable can prevent the hood from being opened.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3

This Genuine BMW door lock with motor actuator is for the drivers side front door on e46 coupes and convertibles.

This item fits the following BMWs:
2001-2006 E46 BMW 325ci 330ci M3 - Coupe & Convertible

This custom roof spoiler will help your BMW E46 2 door stand out from the crowd. Made of durable ABS plastic and designed for a quick and easy installation, this roof spoiler gives your BMW a custom look in minutes. Installs with double sided tape (add from the options list below).

This item fits the following BMWs:
2000-2006 E46 BMW 323ci 325ci 328ci 330ci M3

This is the small rectangular cover that mounts in the front bumper that covers the tow hook opening. This unit fits the standard front bumper on E46 Sedan's and Wagons from 2002-2005. It does not fit the M-technic or Sport Aerodynamic Package front bumper. This item is unpainted. It needs to be painted to match your exterior color.

This item fits the following BMWs:
2002-2005 E46 BMW 325i 325xi 330i 330xi

The" ///M3" Emblem from BMW that is not included with your side grilles. Includes the need back plate for fitment and installation.

Genuine BMW Emblem With Supporting Plate - M3
This item fits the following BMW Chassis:
E46 M3,E46

 

This headlight trim is the scalloped cover at the bottom of e46 3 series Coupe and Convertible headlights. Not for cars with headlight washers.

This item fits the following BMWs:
1999-2003 E46 BMW 323ci 325ci 328ci 330ci
2001-2006 E46 BMW M3

This is the center black plastic front impact strip with front license plate bracket on E46 3 series sedan's, The impact strip snaps into place.

This item fits the following BMWs:
Stock Front Bumper
1999-2001 E46 BMW 323i 325i 325xi 328i 330i 330xi

This Genuine BMW Gasket seals the "Shark Fin" Multi-Band Telephone Antenna to the roof of the car.
This item fits the following BMW Chassis:
E46 M3,E46

This Genuine BMW hood vent grill is located at the trailing edge of the hood at the base of the windshield. It has openings for the windshield washer jets.

This item fits the following BMWs:
2001-2006 E46 BMW M3

HARD Motorsport's window deflector pairs are a perfect option to increase the aerodynamic properties of your E46 BMW. Designed to reduced drag and resistance, these deflectors prevent air from flowing into your interior, allowing for faster acceleration times.

Features:

• Aluminum
• Lightweight
• Powder-coated
• Mounts in Factory Locations
• No Drilling/Hardware Needed

Compatible with HARD Motorsport polycarbonate rear windows.

 

Fits the following vehicles:

E46 BMW All coupe models

Make your BMW more aggressive with our vacuumed carbon fiber shark fin. Installation is a simple application of double-sided tape.

This product fits the following BMWs:
2001 - 2006 E46 M3
1998 - 2004 E39 M5

This is the black plastic front impact strip with license plate bracket on E46 3 series sedan's. The impact strip snaps into place. It can be used on either the M Aerodynamics Package front bumper (option code P337A or S715A) or the M Technic / ZHP front bumper (option code S716A)

This item fits the following BMWs:
M Aerodynamics and/or ZHP Front Bumper
1999-2005 E46 BMW 323i 325i 325xi 328i 330i 330xi

This Genuine BMW trunk lid trip with trunk release button is a direct replacement for the factory trunk release.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 325i 325xi 328i 330i 330xi - Sedan Only

Genuine BMW Plug
This item fits the following BMW Chassis:
E34 M5,E30,E34,E46,E83 X3

This is the black plastic right (pasengers) front impact strip on E46 3 series sedan's from 2002-2005, The impact strip snaps into place. Not for M Aerodynamics or M Technic bumper.

This item fits the following BMWs:
Stock Front Bumper
2002-2005 E46 BMW 325i 325xi 330i 330xi

Replace your defective or damaged E46 sunroof drive motor with this Genuine BMW part. E46 sunroof's are notorious for causing problems.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
1999-2001 E38 BMW 740i 740il 750il
2002-2006 R50 MINI MINI Cooper
2002-2006 R53 MINI MINI Cooper S

This trim clamp holds on the trim that runs under the body's drip edge on the roof above the side windows. 40 per vehicle.

GENUINE BMW TRIM CLAMP 51138204858

This items is either referred to as the Hood Cowl Cover or Windshield Cowl Cover. It is the black plastic cover at the base of the windshield. It may fade or crack with age. It fits E46 323ci 325ci 328ci 330ci M3 and all E46 Convertibles. It will not fit E46 Sedans.

This item fits the following BMWs:
1999-2005 E46 BMW 323ci 325ci 328ci 330ci M3

This is the hood catch release that is mounted on the front left of the car and is accessed under the front edge of the hood.

This item fits the following BMWs:
1999-2005 E46 BMW 323ci 325ci 328ci 330ci M3 - coupe & convertible

This headlight trim is the cover at the top of e46 3 series sedan / wagon headlights. This is for the right / passenger side.

This item fits the following BMWs:
2002-2005 E46 BMW 325i 325xi 330i 330xi

This Genuine BMW door lock with motor actuator is for the passenger side front door on e46 coupes and convertibles.

This item fits the following BMWs:
2001-2006 E46 BMW 325ci 330ci M3 - Coupe & Convertible

Genuine BMW Engine Compartment Screening, Front
This item fits the following BMW Chassis:
E46 M3,E46

 

Euro license plate holder for non-ZHP and M-Tech front bumpers.

Fits the following vehicles:
E46 BMW 325i/ix 330i/ix

This is the center black plastic front impact strip on E46 3 series sedan's, The impact strip snaps into place and replaces the front license plate bracket. It can be used on either the stock bumper thru 2001 or the M Aerodynamics Package front bumper (option code P337A or S715A) or the M Technic / ZHP front bumper (option code S716A)

This item fits the following BMWs:
Stock Front Bumper
1999-2001 E46 BMW 323i 325i 325xi 328i 330i 330xi

M Aerodynamics and/or ZHP Front Bumper
1999-2005 E46 BMW 323i 325i 325xi 328i 330i 330xi

By using all the aero elements for the E46 M3 from N15 Design, the front aero package is for those who are looking for ultimate front end downforce and engine bay cooling.

Hood vents are designed to improve  the cooling system while providing front downforce by evacuating high pressure air under the hood. Water temperatures can drop as much as 15 degrees. While the fender vents reduce lift on the front axle and drag from the front wheel well area.

 

Package includes:

• Hood Outer Vents
• Hood Center Vent
• Front Fender Vents
• All needed hardware and cutting templates 

This items is either referred to as the Hood Cowl Cover or Windshield Cowl Cover. It is the black plastic cover at the base of the windshield. It may fade or crack with age. It fits E46 323i 325i 328i 330i 4 door models. It will not fit E46 Coupes.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 325i 325xi 328i 330i 330xi

Genuine BMW Cover, Handle Cut-Out - Schwarz
This item fits the following BMW Chassis:
E46 M3,E46

This headlight trim is the scalloped cover at the bottom of e46 3 series Coupe and Convertible headlights. Not for cars with headlight washers.

This item fits the following BMWs:
1999-2003 E46 BMW 323ci 325ci 328ci 330ci
2001-2006 E46 BMW M3

The external temperature sensor on a BMW is placed within the underbody plastics that extend very close to the road. As a result it's easy to damage by rolling into a low curb or parking lot tire stop. The first sign you may have a problem with your external temperature sensor is if you have a really low reading. This is caused by the sensor either being damaged, missing or having an open circuit; the wires leading to the sensor may have torn off in an impact.

 

Includes solder filled heat shrink connectors, contact leads with wire, plug housing, temperature sensor, 10 pack of zip ties, and a panel mount zip tie for mounting the sensor.

This is the Genuine BMW tow hook cover that goes into the front bumper on the passenger side. It includes a small tether to help to keep it in place. Unpainted.

This item fits the following BMWs:
2001-2006 E46 BMW M3

This is the Genuine BMW right rear vent window gasket. It is black in color.

This item fits the following BMWs:
1999-2006 E46 BMW 323ci 325ci 328ci 330ci M3 - Coupe

This headlight trim is the cover at the top of e46 3 series sedan / wagon headlights. This is for the right / passenger side.

This item fits the following BMWs:
1999-2001 E46 BMW 323i 325i 325xi 328i 330i 330xi

This is the black plastic right (passengers) front impact strip on E46 3 series sedan's, The impact strip snaps into place. It can be used on either the stock bumper thru 2001 or the M Aerodynamics Package front bumper (option code P337A or S715A) or the M Technic / ZHP front bumper (option code S716A)

This item fits the following BMWs:
Stock Front Bumper
1999-2001 E46 BMW 323i 325i 325xi 328i 330i 330xi

M Aerodynamics and/or ZHP Front Bumper
1999-2005 E46 BMW 323i 325i 325xi 328i 330i 330xi

A common problem with E46's is that the sunroof headliner /sunshade fails and comes off the tracks. This kit includes Water channel, slide elements, frame corner pieces and hardware.

This item fits the following BMWs:
1999-2003 E46 BMW 323i 325i 325xi 328i 330i 330xi - Sedan and Wagon

Placed directly behind the radiator, the N15 Design center hood vent brings additional efficiency to the cooling system while providing additional front downforce by evacuating high pressure air under the hood. Both function and form were considered in the design process, and the vents compliment the lines of the car. If paired with the side vents, water temperatures can drop as much as 15 degrees.

Package includes:

• Full set of installation instructions
• (1) Center E46 M3 vent
• (6) 1/8' aluminum pop rivets in black
• (1) Cutting template

A common problem with E46's is that the sunroof headliner /sunshade fails and comes off the tracks. This kit includes Water channel, slide elements, frame corner pieces and hardware.

This item fits the following BMWs:
1999-2003 E46 BMW 323ci 325ci 328ci 330ci M3 - Coupe

This Genuine BMW splash panel provides a transition from the spoiler to the front of the wheel well and has an opening for a brake duct.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi - Not for cars with M-Technic Aero

Polycarbonate windows are an easy way to save 50% weight in comparison to stock window glass. HARD Motorsport's rear windows are abrasive resist and provides protection against chemicals and UV yellowing and hazing. Also, 3M vinyl is used around the edges in order to keep an OEM Factory look. These windows are designed to be used with original window gaskets.

Priced as a pair.

**Does not include window mounting hardware**

Fits the following vehicles:

E46 BMW All 4 Door sedan sub-models

These hood vents were designed to improve  the cooling system while providing front downforce by evacuating high pressure air under the hood. Water temperatures can drop as much as 15 degrees. 

Package includes:

• (2) E46  side hood vents
• Full set of installation instructions
• (25) 1/8' aluminum pop rivets in black
• Cutting templates for above and below hood installation

*Professional installation is recommended* 

This is the front license plate bracket for e46 sedan and wagon with the standard front bumper. This part will not work with the M-Technic or M Aerodynamics front bumpers.

This item fits the following BMWs:
2002-2005 E46 BMW 325i 325xi 330i 330xi

Side Window Deflectors are custom fit, in-window-channel, rain and debris guards that allow fresh air to enter and leave the vehicle while having the window still cracked during harsh climates. Side Window Deflectors also help reduce wind noise and allow interior heat to escape.

Weathertech has made a name for themselves for having the highest-quality products with the best customer service they can offer. Proudly manufactured in America, they hold very tight engineering tolerances to allow a perfect fit in every application. With a product range from TechShade® (windshield sun shades), to trunk mats, and their world-famous laser measured floor liners, Weathertech has the products you're looking for!

This Fire Wall Block Off Plate is the perfect solution for sealing off the engine bay from the cab in gutted track cars. It is pre-curved and has a bead roll to help retain its shape and keep out engine pollutants and other dangerous conditions. This plate mounts to factory locations and takes only minutes to install, needing no drilling, tapping, or welding. 

Fits both left and right side drive vehicles.

Use of silicone during installation can help create a tighter seal. Also, heat-reflective material can be used to help reduce heatsoak in the cabin.

 

Fits the following vehicles:

E46 BMW  All Sub-models

This Genuine BMW trunk lid trip with trunk release button is a direct replacement for the factory trunk release.

This item fits the following BMWs:
1999-2003 E46 BMW 323ci 325ci 328ci 330ci M3 - Coupe only

Betalink K1 (Beta Link) adhesive for installation of many aerodynamic components including spoilers and splitters. This is the Genuine BMW adhesive kit that they recommend for Genuine BMW aerodynamic pieces and is specially formulated for the paint and urethane spoiler materials that BMW uses.

This is the basic kit that includes:
solvent cleaner (125mL)
1-part epoxy (80mL)
sandpaper
applicator tool (spatula)

For best results:
Bonding surfaces must be cleaned with the cleaner and must be free from grease.
The ambient temperature for bonding must be no lower than 15°C and no higher than 35°C.
The Betalink glue K1 must be allowed to harden for at least 6 hours at room temperature.
The car must not be cleaned in a car wash for at least 48 hours afterwards.

This Genuine BMW trim clip is used for a variety of purposes including for securing the interior door panel to the door. This item fits many BMW's.

Side Window Deflectors are custom fit, in-window-channel, rain and debris guards that allow fresh air to enter and leave the vehicle while having the window still cracked during harsh climates. Side Window Deflectors also help reduce wind noise and allow interior heat to escape.

Weathertech has made a name for themselves for having the highest-quality products with the best customer service they can offer. Proudly manufactured in America, they hold very tight engineering tolerances to allow a perfect fit in every application. With a product range from TechShade® (windshield sun shades), to trunk mats, and their world-famous laser measured floor liners, Weathertech has the products you're looking for!

Side Window Deflectors are custom fit, in-window-channel, rain and debris guards that allow fresh air to enter and leave the vehicle while having the window still cracked during harsh climates. Side Window Deflectors also help reduce wind noise and allow interior heat to escape.

Weathertech has made a name for themselves for having the highest-quality products with the best customer service they can offer. Proudly manufactured in America, they hold very tight engineering tolerances to allow a perfect fit in every application. With a product range from TechShade® (windshield sun shades), to trunk mats, and their world-famous laser measured floor liners, Weathertech has the products you're looking for!

This is the Genuine BMW air duct panel that is located behind the front bumper on E46 3 series models except cars with the factory M Aerodynamics package option code S716A.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 325i 325xi 328i 330i 330x - Sedan

This is the OE CSL emblem from BMW. If you are replacing your grilles and want to change the traditional emblem out to the Euro CSL emblem, this is exactly the part you need.

This is the Genuine BMW lower engine splash panel plastic cover for E46 325xi and 330xi. This splash panel can become damaged by road debris. It is important to replace this part as many other components rely on the integrity of this panelfor proper mounting.

This item fits the following BMWs:
1999-2005 E46 BMW 325xi 330xi

This antenna mast is the short rod that mounts on the rear outer fender. This is an original BMW product.

This item fits the following BMWs:
2000-2006 E46 BMW 323ci 325ci 328ci 330ci M3 - Only for Convertibles
2003-2008 Z4 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

These are e46 3 series coupe and convertible (2 door) door handles wrapped in carbon fiber. Utilizing BMW OEM door handle pieces and skillfully wrapped in carbon fiber, it will ensure perfect fitment while being unique from the rest of the e46's. It's a very limited item, get it while it's available.Total of 4 pieces that replaces your OEM painted door handles directly onto your door. It is for e46 3 series including M3s. Professional installation is highly recommended.

This item fits the following BMWs:
2000-2006 E46 BMW 323ci 325ci 328ci 330ci M3 - Coupe & Convertible

This OEM jack plug is used on many BMWs to protect the under carriage while jacking. They install into receptacles under the rockers at all 4 corners, and give your BMW a "puck" for the cars weight to rest on.

These jack pads commonly get lost or damaged through the years. If your BMW is missing a few (or all) of them, it's time to get some new ones. Very easy to replace and install, these take just seconds to replace. We've found that on the 1992-1999 E36 3 series these make a GREAT upgrade to the original ones normally found on the E36. Be sure to get a complete set of 4 if you are installing these on an E36 (these are sold individually).

Found and used on the following BMWs:
1992-1999 E36 3 series - UPGRADE for all E36, including E36 M3, 318i, 318is, 318ti, 325i, 325is, 325ic, 328i, 328is, 328ic, 323is
1999-2005 E46 3 series (including 323i, 323Ci, 325i, 325xi, 325Ci, 328i, 328Ci, 330i, 330xi, 330Ci, and E46 M3)
2002-2008 E65 7 series including 745i, 745Li, 750i, 750Li, 760Li
2003-2008 Z4 Roadster & Coupe
2004-2008 X3 SAV including X3 2.5, X3 3.0, X3 3.0si
2000-2006 X5 SAV including X5 3.0, X5 3.0si, X5 4.4, X5 4.6is, X5 4.8is

This Genuine BMW splash panel provides a transition from the spoiler to the front of the wheel well and has an opening for a brake duct.

This item fits the following BMWs:
1999-2005 E46 BMW 325xi 330xi
Only for cars with factory Aerodynamic Package option code S716A:
1999-2005 E46 BMW 323i 325i 328i 330i

This Genuine BMW splash panel provides a transition from the spoiler to the front of the wheel well and has an opening for a brake duct.

This item fits the following BMWs:
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi - Not for cars with M-Technic Aero

Genuine BMW Covering Right
This item fits the following BMW Chassis:
E46 M3,E46

This is the Genuine BMW bumper mesh grid that goes in the center of the stock front bumper. This is secured in place with locking ring #64118247773 (sold individually)

This item fits the following BMWs:
1999-2003 E46 BMW 323ci 325ci 328ci 330ci

This headlight trim is the cover at the top of e46 3 series sedan / wagon headlights. This is for the left / driver side.

This item fits the following BMWs:
2002-2005 E46 BMW 325i 325xi 330i 330xi

Side Window Deflectors are custom fit, in-window-channel, rain and debris guards that allow fresh air to enter and leave the vehicle while having the window still cracked during harsh climates. Side Window Deflectors also help reduce wind noise and allow interior heat to escape.

Weathertech has made a name for themselves for having the highest-quality products with the best customer service they can offer. Proudly manufactured in America, they hold very tight engineering tolerances to allow a perfect fit in every application. With a product range from TechShade® (windshield sun shades), to trunk mats, and their world-famous laser measured floor liners, Weathertech has the products you're looking for!

Has the driver side door lock cover disappeared from your E46? Replace it with this Genuine BMW part. The cover comes primed ready to paint and snaps into place.

This item fits the following BMWs:
2001-2005 E46 BMW 325i 325ci 325xi 330i 330ci 330xi M3