BMW Aero & Body Kits for BMW 3 Series E46 (1999-2005)

Clear BMW chassis
Body kits include front, side, rear, and other components to completely alter or update the appearance of your BMW. These may not be wild and attention-getting add-ons. We offer many pieces that replicate factory bodywork from M3, M5, M Sport and other BMW factory aero kits. Updating the trim and appearance is a great way to add value and refresh your car's ordinary looks.

Genuine BMW CSL Trunk - E46 M3
Genuine European BMW - Corporate Logo
T#:369481
Part#: 41007895884
In Stock
$1,099.95
$1,099.95

Looking to replace your trunk lid with the lighter and sportier CSL trunk lid? This OEM BMW rear deck lid is the real deal CSL direct from Germany - guaranteed to fit like stock.

 

This CSL trunk fits the following BMWs:

E46 M3

ECS Tuning CSL Carbon Fiber Front Lip - E46 M3
ECS - Corporate Logo
T#:394379
Part#: CARB-FL-04C
Back Ordered, Contact Us
$289.95
Free Shipping
ECS Tuning's E46 M3 CSL One Piece front lip gives you the look of a true CSL M3 without the high cost. This piece is made from full carbon fiber and will fit OEM M3 and exact replica front bumpers.
Seibon GTR style carbon fiber hood - E46 M3
Seibon - Corporate Logo
T#:397118
Part#: HD0105BMWE46M3-G
Direct Ship
$1,499.99
$1,499.99

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2003-2006 BMW E46 M3


RKP GT Carbon Fiber Roof Panel - 2x2 Weave - E46 Coupe
RKP - Corporate Logo
T#:567780
Part#: E46GTROOFCF22
Direct Ship
New Item
$1,495.00
$1,495.00
When the E46 M3 CSL was released, one of the central talking points of the vehicle was the cutting edge weight saving technologies that were utilized in its construction. The CSL was most notably distinguished from the standard E46 M3 by its various lightweight components. The largest of these is the carbon fiber-reinforced plastic (GFP) roof panel, which weighs over 13 pounds less than its conventional steel counterpart. Many enthusiasts sought after the BMW OEM roof to add to their vehicles, but the part was and is to this day only available to those with a CSL vin #. As an answer to the E46 M3 clients, RKP is proud to introduce the RKP E46 M3 carbon fiber roof panel. Their carbon roofs are constructed by hand at a local facility specializing in components for Grand Am, Time Attack, and various hill climb and formula car classes. Each roof has great fit and finish and saves a considerable amount of weight over the standard roof panel.

Aeroflow Dynamics Aluminum V1 Side Skirt Extensions - E46 Coupe & M3
Aeroflow Dynamics - Corporate Logo
T#:567112
Part#: SS-E46-V1
On Order, ETA May 21, 2019
New Item
$170.00
$170.00

The Aluminum  V1 side skirt extensions from Aeroflow Dynamics are a great way to improve aerodynamics as well as add a significantly sportier look to your BMW! 

Features and Specifications:

  • Made from high-quality aluminum
  • Made in the USA
  • Comes fully CNC'd and professionally powder coated gloss black.
  • Comes pre-drilled
  • Fitment Guaranteed
  • Hardware is included
  • Comes in a pair ( left & right) 
  • Professional install recommended
Genuine BMW Euro Front Bumper Cover - E46 M3
Genuine BMW Euro Front Bumper Cover - E46 M3
For vehicles with production date from 09/2001. Deletes corner reflectors!
Genuine European BMW - Corporate Logo
T#:12772
Part#: 51117894989
Ships in 2 Days
22% off MSRP $825.05
$643.68
22% off MSRP $825.05
$643.68


Genuine BMW Trim Cover, Bumper, Primered, Front
This item fits the following BMW Chassis:
E46 M3,E46


Genuine BMW Euro CSL Carbon Fiber Rear Diffuser - E46 M3
Genuine European BMW - Corporate Logo
T#:375729
Part#: 51127897863
Ships on Aug 6, 2019
$1,999.95
$1,999.95
If you are going for the full CSL conversion, or just looking to make your BMW stand out, this carbon fiber rear diffuser is an excellent way to do it. This is not a replica, but rather a genuine CSL component. These are extremely hard to come by, and offers a stunning visual upgrade.
E46 M3 Style Front Bumper with Fog Lights - E46 325i/ci/xi 330i/ci/xi
ECS - Corporate Logo
T#:5518
Part#: M3E46FTBUMP
In Stock
$209.95
$209.95
This is a high-quality replica of the original E46 M3 front bumper spoiler which has been adapted to fit the non-M E46 3 series. This makes a great visual upgrade over a stock bumper, especially on a sedan where you can get that M3 4-door look! This bumper is molded off of the original M3 bumper for an accurate representation of the M3 but sized to fit to a car with the non-M fenders. It's a great low-cost upgrade alternative to any factory replacement spoiler if yours needs replacement.

This kit includes the M3-style bumper cover, left and right fog lights, fog light trim rings, and the mesh center grill. Unless you have a M Sport or ZHP bumper, the brake ducts, wheel well liners, and undertrays will need to be sourced separately. Facelift models require the early-style outboard hanger brackets (part numbers 51118195295 and 51118195296). You can add them to your order from the options below or purchase them from your local BMW dealer.
Facelift models are: any 2002-2006 sedan and any 2004-2006 coupe/convertible.

This item fits the following BMWs:
1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi

AC Schnitzer Rear Bumper
AC Schnitzer - Corporate Logo
T#:394891
Part#: 511246130
In Stock
$320.00
$256.00
Limited Qty Sale
$320.00
$256.00
Limited Qty Sale

Karbonius M4 style carbon fiber roof panel - E46 M3
Karbonius Composites - Corporate Logo
T#:567966
Part#: 0131T005
In Stock
New Item
$1,734.95
$1,438.52
Limited Qty Sale
$1,734.95
$1,438.52
Limited Qty Sale
Inspired by the M4 double bump roof this replacement panel replaces the heavy steel roof to remove weight from the highest point in the car to lower the center of gravity to improve and performance.
Karbonius Carbon fiber Roof - E46 M3 323ci 325ci 328ci 330ci
Karbonius Composites - Corporate Logo
T#:557976
Part#: 0131T004
In Stock
$1,796.64
$1,796.64
This is a replacement roof panel for you sunroof equipped or factory steel roof vehicle. Made form carbon fiber to remove as much weight as possible form the highest point of the car lower the center of gravity for increased handling characteristics. Due to the level of modification we recommend professional installation.
Sunroof Wind Deflectors - Dark Smoke - E46
WeatherTech - Corporate Logo
T#:400180
Part#: 89015
In Stock
$74.95
Free Shipping

Side Window Deflectors are custom fit, in-window-channel, rain and debris guards that allow fresh air to enter and leave the vehicle while having the window still cracked during harsh climates. Side Window Deflectors also help reduce wind noise and allow interior heat to escape.

Weathertech has made a name for themselves for having the highest-quality products with the best customer service they can offer. Proudly manufactured in America, they hold very tight engineering tolerances to allow a perfect fit in every application. With a product range from TechShade® (windshield sun shades), to trunk mats, and their world-famous laser measured floor liners, Weathertech has the products you're looking for!



HARD Motorsport M3-Style Motorsport Fender Flares - BMW E46 Sedan, Touring
HARD Motorsport - Corporate Logo
T#:556669
Part#: E46FENDERFLARES
Direct Ship
Starting at $510.00
Starting at $510.00

HARD Motorsport M3 fender flares offer nearly 35mm of added clearance, allowing you to run run wider tires and spacers that help improve handling at track days and autocross sections. Matching the M3 Fender Style, this full kit adds an aggressive look, while still keeping a factory appearance.  

The fender flares are easily installed with pop-rivets and are made from plastic instead of fiberglass, keeping them less likely to have cracking and splitting from normal wear and tear.

 

Product fits the following vehicles:

E46 BMW Non-M Sedan

Seibon carbon fiber rear diffuser - E46 M3
Seibon - Corporate Logo
T#:397114
Part#: RD0105BMWE46M3
Direct Ship
$510.00
$510.00

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2001 - 2006 E46 M3

Seibon OE style carbon fiber hood - E46 3 series sedan
Seibon - Corporate Logo
T#:396284
Part#: HD0205BMWE464D-O
Direct Ship
$820.00