BMW Aero & Body Kits for BMW 3 Series E46 (1999-2005)

Clear BMW chassis
Body kits include front, side, rear, and other components to completely alter or update the appearance of your BMW. These may not be wild and attention-getting add-ons. We offer many pieces that replicate factory bodywork from M3, M5, M Sport and other BMW factory aero kits. Updating the trim and appearance is a great way to add value and refresh your car's ordinary looks.

ECS Tuning CSL Carbon Fiber Front Lip - E46 M3
ECS - Corporate Logo
T#:394379
Part#: CARB-FL-04C
In Stock
Sale - Save 5% $273.95
$260.25
Free Shipping
Sale - Save 5% $273.95
$260.25
Free Shipping
ECS Tuning's E46 M3 CSL One Piece front lip gives you the look of a true CSL M3 without the high cost. This piece is made from full carbon fiber and will fit OEM M3 and exact replica front bumpers.
Turner Motorsport Aluminum Skid Plate - E46 M3
Turner Motorsport - Corporate Logo
T#:400747
Part#: 021470TMS04KT
In Stock
Sale - Save 10% $299.95
$269.95
Free Shipping
Sale - Save 10% $299.95
$269.95
Free Shipping

Considering the belly pan that comes on the E46 M3 is designed from plastic, the risk of damage is much greater for any low mounted coolers and hoses. Even the cost of replacing an original belly pan is enough to be committed to a more permanent design.

We wanted to offer something that would protect all of the underside engine components, on both street cars and modified track cars you never know when something will pop up in the way. Something as mundane as a parking block or roadkill can damage a plastic belly pan - weaEURtmve all seen drooping, damaged belly pans and resulting filthy engine bays.

Our engineers paid close attention to fitment in all areas including radiator support and fender liners. Durability is ensured with a center plate manufactured from 8 gauge 5052 aluminum with 3/16aEUR frame supports. Installation is simple, with the only modification required is adding rivet nuts to existing holes in the frame, allowing for a rigid product.

Click here for product installation instructions.

Also available in s wrinkle black powder coat!

Rivnut installation tool

Features:

  • Durable 8GA 5052 Aluminum skid plate construction.
  • 3/16aEUR 5052 Aluminum skid plate frame mounts/supports.
  • Maintains factory aerodynamics.
  • Maintains factory mounting for side panels/splash guards.
  • All stainless rivnuts and bolts
  • Easy to convert back to stock
  • Made in America
Turner Motorsport Aluminum Skid Plate - Wrinkle Black Powder Coat - E46 M3
Turner Motorsport - Corporate Logo
T#:552794
Part#: 021470TMS05KT
In Stock
Sale - Save 5% $399.95
$379.95
Free Shipping
Sale - Save 5% $399.95
$379.95
Free Shipping

Considering the belly pan that comes on the E46 M3 is designed from plastic, the risk of damage is much greater for any low mounted coolers and hoses. Even the cost of replacing an original belly pan is enough to be committed to a more permanent design.

We wanted to offer something that would protect all of the underside engine components, on both street cars and modified track cars you never know when something will pop up in the way. Something as mundane as a parking block or roadkill can damage a plastic belly pan - weaEURtmve all seen drooping, damaged belly pans and resulting filthy engine bays.

Our engineers paid close attention to fitment in all areas including radiator support and fender liners. Durability is ensured with a center plate manufactured from 8 gauge 5052 aluminum with 3/16aEUR frame supports. Installation is simple, with the only modification required is adding rivet nuts to existing holes in the frame, allowing for a rigid product.

Click here for product installation instructions.

Also available in a Mill finish option!

Rivnut installation tool

Features:

  • Durable 8GA 5052 Aluminum skid plate construction.
  • 3/16aEUR 5052 Aluminum skid plate frame mounts/supports.
  • Maintains factory aerodynamics.
  • Maintains factory mounting for side panels/splash guards.
  • All stainless rivnuts and bolts
  • Easy to convert back to stock
  • Made in America

Genuine BMW CSL Trunk - E46 M3
Genuine European BMW - Corporate Logo
T#:369481
Part#: 41007895884
In Stock
$1,099.95
Free Shipping

Looking to replace your trunk lid with the lighter and sportier CSL trunk lid? This OEM BMW rear deck lid is the real deal CSL direct from Germany - guaranteed to fit like stock.

This CSL trunk fits the following BMWs:

E46 M3


HARD Motorsport M3-Style Motorsport Fender Flares - BMW E46 Sedan, Touring
HARD Motorsport - Corporate Logo
T#:556669
Part#: E46FENDERFLARES
In Stock
Sale - Save 12% $510.00
Starting at $446.25
Sale - Save 12% $510.00
Starting at $446.25

HARD Motorsport M3 fender flares offer nearly 35mm of added clearance, allowing you to run run wider tires and spacers that help improve handling at track days and autocross sections. Matching the M3 Fender Style, this full kit adds an aggressive look, while still keeping a factory appearance.

The fender flares are easily installed with pop-rivets and are made from plastic instead of fiberglass, keeping them less likely to have cracking and splitting from normal wear and tear.

Product fits the following vehicles:

E46 BMW Non-M Sedan

Seibon OE style carbon fiber hood - E46 3 series sedan
Seibon - Corporate Logo
T#:396284
Part#: HD0205BMWE464D-O
Direct Ship
$820.00
$820.00

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2002-2006 BMW E46 325i 325xi 328i 330i 330xi


Aeroflow Dynamics Aluminum V1 Side Skirt Extensions - E46 Coupe & M3
Aeroflow Dynamics - Corporate Logo
T#:567112
Part#: SS-E46-V1
Direct Ship
$170.00
$170.00

The Aluminum V1 side skirt extensions from Aeroflow Dynamics are a great way to improve aerodynamics as well as add a significantly sportier look to your BMW!

Features and Specifications:

  • Made from high-quality aluminum
  • Made in the USA
  • Comes fully CNC'd and professionally powder coated gloss black.
  • Comes pre-drilled
  • Fitment Guaranteed
  • Hardware is included
  • Comes in a pair ( left & right)
  • Professional install recommended
HARD Motorsport "M3" Fender Flares -- E46 Coupe Non-M
HARD Motorsport - Corporate Logo
T#:390229
Part#: FULLFLAREKTE462D
Direct Ship
Sale - Save 10% $510.00
$459.00
Free Shipping
Sale - Save 10% $510.00
$459.00
Free Shipping

HARD Motorsport M3 fender flares offer nearly 35mm of added clearance, allowing you to run run wider tires and spacers that help improve handling at track days and autocross sections. Matching the M3 Fender Style, this full kit adds an aggressive look, while still keeping a factory appearance.

The fender flares are easily installed with pop-rivets and are made from plastic instead of fiberglass, keeping them less likely to have cracking and splitting from normal wear and tear.

Product fits the following vehicles:

E46 BMW Non-M Coupes


Seibon GTR style carbon fiber hood - E46 3 series coupe
Seibon - Corporate Logo
T#:396289
Part#: HD9902BMWE462D-G
Direct Ship
$1,600.00
$1,600.00

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
1999-2002 BMW E46 323ci 325ci 328ci 330ci


Seibon GTR style carbon fiber hood - E46 3 series coupes
Seibon - Corporate Logo
T#:396290
Part#: HD0205BMWE462D-G
Direct Ship
$1,600.00
$1,600.00

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2003-2006 BMW E46 325ci 330ci

Seibon GTR style carbon fiber hood - E46 M3
Seibon - Corporate Logo
T#:397118
Part#: HD0105BMWE46M3-G
Direct Ship
$1,499.99
$1,499.99

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2003-2006 BMW E46 M3

Rear Flares E46 Non M Cars
HARD Motorsport - Corporate Logo
T#:552815
Part#: FLAR.E46C.REAR
Direct Ship
Sale - Save 10% $275.00
$247.50
Sale - Save 10% $275.00
$247.50


Seibon OE style carbon fiber hood - E46 Coupes
Seibon - Corporate Logo
T#:396276
Part#: HD0205BMWE462D-O
Ships in 7 Business Days
$820.00
$820.00

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on battleships, satellites and high performance racecars. Supporting race teams is one of Seibons' main specialties and you will see their work in many racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2003-2006 E46 BMW 325ci 330ci