Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW E46 Stainless Steel Brake Lines

BMW E46 Stainless Steel Brake Lines Stainless brake lines are a must for any track driven BMW and make a great upgrade on street cars as well. Brake lines should be replaced every few years anyway and braided stainless lines offer an additional layer of protection. Rubber brake lines deteriorate from the outside and inside. The external rubber can become stiff, crack, or get damaged by debris. The stainless braiding and Teflon inner coating help protect the outside of the line from debris. And with a stronger material the line will not expand or swell under extreme braking conditions. Stainless brake lines provide a firmer positive pedal feel under hard braking by greatly reducing the expansion that can be found in stock rubber lines. The internal of old stock rubber lines can become constricted over time even if the exterior looks normal. With a blockage or restriction you can have serious braking issues that often go mis-diagnosed as warped rotors, stuck calipers, or bad ball joints. Make sure you don't overlook your brake lines! All brake lines, rubber or stainless, should be replaced every few years and any time you replace a brake caliper.

These are the highest quality stainless brake lines that meet DOT specs at great prices. Our lines are made with stainless braiding and Teflon inner lines. The fittings are the correct BMW type and sizing and with swaged fittings and an additional rubber boot for protection.
You're currently viewing parts for your (E46) 3-Series 1999-2005. Reset your chassis
For accurate results, specify your model below.
Chase Bays Brake Line Relocation - E46

Eliminate engine bay clutter and improve braking performance, this kit is perfect for people wanting to replace the OE brake valves with a adjustable valve, delete ABS, or just route lines in a more practical way. 

*For use with the Chase Bays Brake booster eliminator kit only.

Chase Bays
Part #: CB-BMW-E46BBE
Price: $299.99 (USD) 
Direct Ship
Quantity:   
Chase Bays Stainless-Steel Brake Line Set - E46 M3 This brake line kit is for the enthusiast who wants to increase braking response, improve pedal feel, and upgrade to a more durable setup.
Chase Bays
Part #: BMW-950
Price: $99.99 (USD) 
Direct Ship
Quantity:   
Chase Bays Stainless-Steel Brake Line Set - E46 Non M This brake line kit is for the enthusiast who wants to increase braking response, improve pedal feel, and upgrade to a more durable setup.
Chase Bays
Part #: BMW-1700
Price: $99.99 (USD) 
Direct Ship
Quantity:   
Chase bays Hydro Handbrake Brake Line Kit - E46

This hydraulic hand brake Line set is designed to easily plumb a hydraulic hand brake into the E46. This kit uses only the highest quality for ease of installation and long life, each kit uses stainless steel braided lines with -3AN fittings for a leak free and safe operation.

 

*For vehicles with standalone or dual rear calipers only

Chase Bays
Part #: CB-BMWE46-HB
Price: $149.99 (USD) 
Direct Ship
Quantity:   
Agency Power Front Steel Braided Brake Lines - E46 The Agency Power brake line and clutch line kits are made in the USA to meet strict D.O.T. certifications. The steel braided lines are red in color with the AP logo printed on it. The CNC machined fittings are finished in black. All kits are assembled for a quick and easy install
Agency Power
Part #: AP-E46-405
Price: $60.00 (USD) 
Direct Ship
Quantity:   
E46 325xi/330xi Stainless Steel Brake Line Set - DOT Approved These braided stainless brake steel lines improve the performance and safety of your BMW's braking system. They are DOT approved, and coated to protect the braided stainless steel from abrasion or road-related damage and offer tremendous quality at a phenomenal price.

Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

This item fits the following BMWs:
2001-2005 E46 BMW 325xi 330xi
StopTech
Part #: PLBE46XICOAT
Price: $124.95 (USD) 
Direct Ship
Quantity:   
E46 Stainless Steel Brake Line Set - DOT Approved These braided stainless brake steel lines improve the performance and safety of your BMW's braking system. They are DOT approved, and coated to protect the braided stainless steel from abrasion or road-related damage and offer tremendous quality at a phenomenal price.

Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

This item fits the following BMWs:
1999-2006 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci M3
StopTech
Part #: PLBE46M3DCOAT
Price: $124.95 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Chase Bays Brake Line Relocation - E46

Eliminate engine bay clutter and improve braking performance, this kit is perfect for people wanting to replace the OE brake valves with a adjustable valve, delete ABS, or just route lines in a more practical way. 

 

*For use with OE Master cylinder only

 

Chase Bays
Part #: CB-BMW-E46OEMC
Price: $349.99 (USD) 
Direct Ship
Quantity:   
Hydro Handbrake Brake Line Kit

This hydraulic hand brake Line set is designed to easily plumb a hydraulic hand brake into the E46. This kit uses only the highest quality for ease of installation and long life, each kit uses stainless steel braided lines with -3AN fittings for a leak fr

For use with factory rear calipers

Chase Bays
Part #: E46-OEMC/HB
Price: $149.99 (USD) 
Direct Ship
Quantity: