Sockets for BMW 3 Series E46 (1999-2005)

Clear BMW chassis
A complete garage has every socket the enthusiast would need to tackle any job. If someone is starting their collection, adding to it, or replacing old tools, everything they would need is on this page. Our complete socket kits, wrenches, specialty sockets, and more tools to maintain any BMW or install brand new performance parts are all in one place.

Tool - 21mm 3/8 Drive 6-point Socket
Tool - 21mm 3/8 Drive 6-point Socket
21mm hex socket with 3/8" drive.
Turner Motorsport - Corporate Logo
T#:198591
Part#: 02010021
Ships in 2 Days
$22.95
Free Shipping on orders $99 and up
21mm hex socket with 3/8" drive.
Tool - 22mm 3/8 Drive 12-point Socket
Tool - 22mm 3/8 Drive 12-point Socket
22mm hex socket with 3/8" drive.
Turner Motorsport - Corporate Logo
T#:201435
Part#: 02010022
Ships in 2 Days
$22.95
Free Shipping on orders $99 and up
22mm hex socket with 3/8" drive.
Tool - 27mm 1/2 Drive 6-point Socket
Tool - 27mm 1/2 Drive 6-point Socket
27mm hex socket with 1/2" drive.
Turner Motorsport - Corporate Logo
T#:1351
Part#: TMI9910M27
Ships in 2 Days
$27.95
Free Shipping on orders $99 and up
27mm hex socket with 1/2" drive.

VANOS Solenoid 32mm Socket - E39 540i, E38 740i, E53 X5 4.4 (M62TU)
VANOS Solenoid 32mm Socket - E39 540i, E38 740i, E53 X5 4.4 (M62TU) ...
On the M62TU engine the VAN0S solenoids on both banks are...
Genuine BMW - Corporate Logo
T#:14260
Part#: 83300493363
Ships in 2 Days
$71.01
Free Shipping on orders $99 and up
On the M62TU engine the VAN0S solenoids on both banks are buried behind the timing covers. This makes it impossible to use a wrench on them. They're also an extra-large 32mm hex size which most people won't have in their toolbox. This socket is the factory BMW tool for removing the solenoids in the M62TU. It's a thin wall for easy access in the timing cover and a 1/2" drive.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Schwaben Water Pump Pulley Holder for Removal of Fan Clutch
Schwaben Water Pump Pulley Holder for Removal of Fan Clutch ...
Replacing the fan clutch on most BMW models requires hold...
Schwaben - Corporate Logo
T#:362357
Part#: 001170SCH01A
In Stock
$25.95
Free Shipping on orders $99 and up
Replacing the fan clutch on most BMW models requires holding the water pump pulley while removing the fan clutch lock nut. With less than 1 1/2" clearance on some models this project can easily turn into a mechanical nightmare. Using our special slim line fan clutch wrench in conjunction with the appropriate pulley spanner, the removal and installation required only a few moments.
Schwaben Strut Nut Socket - 22mm
Schwaben Strut Nut Socket - 22mm
To secure shocks and struts to their mounts, the retainin...
Schwaben - Corporate Logo
T#:362742
Part#: 003046SCH01A-04
In Stock
$15.95
Free Shipping on orders $99 and up
To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.

Schwaben Strut Nut Socket - 19mm
Schwaben Strut Nut Socket - 19mm
To secure shocks and struts to their mounts, the retainin...
Schwaben - Corporate Logo
T#:362740
Part#: 003046SCH01A-02
In Stock
$15.95
Free Shipping on orders $99 and up
To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.
Schwaben Strut Nut Socket - 18mm
Schwaben Strut Nut Socket - 18mm
To secure shocks and struts to their mounts, the retainin...
Schwaben - Corporate Logo
T#:362739
Part#: 003046SCH01A-01
In Stock
$15.95
Free Shipping on orders $99 and up
To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.

Schwaben Strut Nut Socket - 21mm
Schwaben Strut Nut Socket - 21mm
To secure shocks and struts to their mounts, the retainin...
Schwaben - Corporate Logo
T#:362741
Part#: 003046SCH01A-03
In Stock
$15.95
Free Shipping on orders $99 and up
To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.

Schwaben Strut Nut Socket - 24mm
Schwaben Strut Nut Socket - 24mm
To secure shocks and struts to their mounts, the retainin...
Schwaben - Corporate Logo
T#:362743
Part#: 003046SCH01A-05
In Stock
$15.95
Free Shipping on orders $99 and up
To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.
Schwaben Automatic Center Punch
Schwaben Automatic Center Punch
One hand operation makes this center punch a valued addit...
Schwaben - Corporate Logo
T#:361300
Part#: PMJ-845
In Stock
$10.95
Free Shipping on orders $99 and up

One hand operation makes this center punch a valued addition to any tool box.

Center punching any flat metal surface keeps your drill bit from wandering and puts the hole where you want it.

Features:

  • Knurled punch handle
  • Press it against the metal to be drilled, and an internal, spring-loaded hammer center punches the metal, placing a small dimple in the surface
  • Especially useful when working in locations where you do not have room to swing a hammer.
  • All metal construction: 5 inches long; A1/2 inch in diameter.

aEUR<

Schwaben 7/8"(22mm) Flexible Oxygen Sensor Wrench
Schwaben 7/8"(22mm) Flexible Oxygen Sensor Wrench
The Schwaben oxygen sensor wrench has a six-point pivot h...
Schwaben - Corporate Logo
T#:368923
Part#: FO-78
In Stock
$30.95
Free Shipping on orders $99 and up

The Schwaben oxygen sensor wrench has a six-point pivot head to provide a secure grip on stubbornly tight oxygen sensors located in awkward, inaccessible locations.

Features:

  • Premium chrome plated
  • Slotted socket head that slips over the sensor wire
  • Long angled handle for leverage



Schwaben Extended 17mm Wheel Stud Socket Adapter
Schwaben Extended 17mm Wheel Stud Socket Adapter
Installed extended wheel studs and would love to be able ...
Schwaben - Corporate Logo
T#:386434
Part#: 004351SCH01A
In Stock
$15.95
Free Shipping on orders $99 and up

Installed extended wheel studs and would love to be able to change wheel spacers as needed? But wait, if you have a flat tire or want to change it up at the track. But now your lug wrench is not deep enough to reach the nuts.

Features:

  • This specially made socket features 17mm male hex on one end and 17mm socket on the other
  • Works to extend reach between wrench and lug nut
  • Keep inside your glove box so it is ready for any tire change on the road or on the track

NOTE: Not for use with impact.

Schwaben Long Reach Protecta Socket Kit - 3 Pieces
Schwaben Long Reach Protecta Socket Kit - 3 Pieces
Protecta socket are used to keep ugly scratch marks from ...
Schwaben - Corporate Logo
T#:385658
Part#: PPS-1721LC
In Stock
$46.95
Free Shipping on orders $99 and up

Protecta socket are used to keep ugly scratch marks from showing up after torqueing down wheel lugs.

Features:

  • Coated six-point long reach deep-well impact sockets
  • Color coded mar-free exterior coatings that prevent nicks and scratches left by plain metal sockets
  • 17mm, 19mm and 21mm Sockets included

Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

Combine these with our torque limiting sockets and the Schwaben A1/2-inch torque wrench for a complete wheel fastener solution.

Schwaben Protecta Socket Kit - 3 Pieces
Schwaben Protecta Socket Kit - 3 Pieces
Protecta socket are used to keep ugly scratch marks from ...
Schwaben - Corporate Logo
T#:385652
Part#: PPS-1721
In Stock
$25.95
Free Shipping on orders $99 and up

Protecta socket are used to keep ugly scratch marks from showing up after torqueing down wheel lugs.

Features:

  • Coated six-point deep-well impact sockets
  • Color coded mar-free exterior coatings that prevent nicks and scratches left by plain metal sockets
  • 17mm, 19mm and 21mm Sockets included

Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

Combine these with our torque limiting sockets and the Schwaben A1/2-inch torque wrench for a complete wheel fastener solution.


Schwaben 1/2" Drive Torque Wrench - ft-lbs
Schwaben 1/2" Drive Torque Wrench - ft-lbs
Proper torque is very important when it comes to working ...
Schwaben - Corporate Logo
T#:361842
Part#: TW-12450
In Stock
$41.95
Free Shipping on orders $99 and up

Proper torque is very important when it comes to working on engines. The importance comes from proper sealing and to keep from damaging threads.

Features:

  • Reversible A1/2-inch drive click-to-stop
  • Torque range of 10 to 150 ft-lb
  • Accurate to within +/-4%
  • 18 inches in length with a convenient carry case

Schwaben BMW 14/17mm Service Wrench
Schwaben BMW 14/17mm Service Wrench
Take one wrench, not two to your next fluid service. The ...
Schwaben - Corporate Logo
T#:361567
Part#: ECST007
In Stock
$30.95
Free Shipping on orders $99 and up

Take one wrench, not two to your next fluid service. The Schwaben Service Wrench fits both crankcase and drain plugs in BMW, Mercedes, and other European vehicles.

Features:

  • Six-point 17mm box end wonaEURtmt round off engine oil drain plugs
  • Hardened 14mm hex at the opposite end fits many transmission fill and drain plugs
  • Made of vanadium steel with polished chrome finish
  • Long handle for added leverage.

Fits most vehicles with M10, M20, M30, M42, M44, M50, M52, M54, M56, M70, S14, S38, S50, S52 and S70.

Application note: Please verify the exact size of the transmission and differential plugs in your car. BMW has used both 14 and 17mm plugs in some vehicles.

Specialty Bit Kit - 100 Pieces
Specialty Bit Kit - 100 Pieces
All the right bits in one box. The perfect assortment to ...
Schwaben - Corporate Logo
T#:361900
Part#: P-100B
In Stock
$22.95
Free Shipping on orders $99 and up

All the right bits in one box. The perfect assortment to keep the job going.

Features:

  • 10 fractional SAE hex, 9 TorxA(r) tamper-proof, 9 TorxA(r)

  • 9 Metric