BBS Wheels for BMW 3 Series E46 (1999-2005)

Clear BMW chassis
Arguably the most trusted and well-regarded wheel manufacturers, BBS Wheels from Germany have been quintessential BMW wheels since their early days in motorsport. All BBS wheels for BMWs are found on this page to set any enthusiast-owned BMW apart from the average daily commuter.

19" Style LM 280 Wheels - Square Set Of Four
BBS - Corporate Logo
T#:402873
Part#: LM280DSPKKT
In Stock
$4,740.00
$4,740.00

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

LM wheels consist of a pressure cast wheel surface and a flow formed rim structure. Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in Diamond Silver with a diamond cut lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Please Note: Aggressive fitment, may require fender rolling or pulling.

Specs:

  • 19x9.5 ET32 - qty 4
  • Diamond Silver with a diamond cut lip
  • Center Bore: PFS
  • Bolt Pattern: 5x120
19" Style XA 103 Wheels - Square Set Of Four
BBS - Corporate Logo
T#:402757
Part#: XA0103PSKT
Direct Ship
$1,540.00
$1,540.00

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

XA wheels consist of a pressure cast wheel surface and a flow formed rim structure. Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in Satin Platinum and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Please Note: Aggressive fitment, may require fender rolling or pulling.

Specs:

  • 19x8.5 ET32 - qty 4
  • Satin Platinum
  • Center Bore: PFS
  • Bolt Pattern: 5x120
19" Style RS 959 Wheels - Square Set Of Four
BBS - Corporate Logo
T#:402712
Part#: RS959DBPKKT
Direct Ship
$4,840.00
$4,840.00

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

RS style wheels combine a lightweight forged construction with an eye-catching yet tasteful design to bring you some of the finest two-piece wheels on the market.

Forged wheels are created by crushing a solid block of aluminum into the desired shape using an extreme amount of pressure. This creates a wheel that is incredibly strong while remaining relatively lightweight. Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a black painted finish with a diamond cut lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Please Note: Aggressive fitment, may require fender rolling or pulling.

Specs:

  • 19x9.5 RS Wheels - qty 4
  • Diamond Black
  • Offset: 35mm
  • Center Bore: PFS
  • Bolt Pattern: 5x120

18" Style RE-V 064 Wheels - Square Set Of Four
BBS - Corporate Logo
T#:402898
Part#: REV064DBKKT
Direct Ship
$2,840.00
$2,840.00

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

RE-V style wheels combine a lightweight forged construction with an eye-catching yet tasteful design to bring you some of the finest two-piece wheels on the market.

Forged wheels are created by crushing a solid block of aluminum into the desired shape using an extreme amount of pressure. This creates a wheel that is incredibly strong while remaining relatively lightweight. Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a black painted finish with a diamond cut lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Please Note: Aggressive fitment, may require fender rolling or pulling.

Specs:

  • 18x8 RE-V Wheels - qty 4
  • Diamond Black
  • Offset: 33mm
  • Center Bore: PFS
  • Bolt Pattern: 5x120

19" Style CH 104 Wheels - Square Set Of Four
BBS - Corporate Logo
T#:402788
Part#: CH104TIPOKT
Direct Ship
$2,455.00
$2,455.00

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

CH-R wheels consist of a pressure cast wheel surface and a flow formed rim structure. Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a Titanium painted finish with a polished lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Please Note: Aggressive fitment, may require fender rolling or pulling.

Specs:

  • 19x8.5 ET32 - qty 4
  • Titanium
  • Center Bore: PFS
  • Bolt Pattern: 5x120
19" Style RS 959 Wheels - Square Set Of Four
BBS - Corporate Logo
T#:402710
Part#: RS959DSPKKT
Direct Ship
$4,840.00
$4,840.00

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

RS style wheels combine a lightweight forged construction with an eye-catching yet tasteful design to bring you some of the finest two-piece wheels on the market.

Forged wheels are created by crushing a solid block of aluminum into the desired shape using an extreme amount of pressure. This creates a wheel that is incredibly strong while remaining relatively lightweight. Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a silver painted finish with a diamond cut lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Please Note: Aggressive fitment, may require fender rolling or pulling.

Specs:

  • 19x9.5 style RS Wheels - qty 4
  • Diamond Silver
  • Offset: 35mm
  • Center Bore: PFS
  • Bolt Pattern: 5x120

19" Style CH 104 Wheels - Square Set Of Four
BBS - Corporate Logo
T#:402785
Part#: CH104BPOKT
Direct Ship
$2,500.00
$2,500.00

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

CH-R wheels consist of a pressure cast wheel surface and a flow formed rim structure. Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a Black painted finish with a polished lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Please Note: Aggressive fitment, may require fender rolling or pulling.

Specs:

  • 19x8.5 ET32 - qty 4
  • Black
  • Center Bore: PFS
  • Bolt Pattern: 5x120
19" Style LM 278 Wheels - Square Set Of Four
BBS - Corporate Logo
T#:402769
Part#: LM278GPKKT
Direct Ship
$4,660.00
$4,660.00

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

LM wheels consist of a pressure cast wheel surface and a flow formed rim structure. Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in Gold with a diamond cut lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Please Note: Aggressive fitment, may require fender rolling or pulling.

Specs:

  • 19x8.5 ET32 - qty 4
  • Gold center with a diamond cut lip
  • Center Bore: PFS
  • Bolt Pattern: 5x120

19" Style CH Wheels - Staggered Set Of Four
BBS - Corporate Logo
T#:403189
Part#: CHBPO19SKT
Direct Ship
$2,520.00
$2,520.00

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

CH-R wheels consist of a pressure cast wheel surface and a flow formed rim structure. Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in a Black painted finish with a polished lip and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Please Note: Aggressive fitment, may require fender rolling/pulling.

Specs:

  • 19x8.5 ET32 - qty 2
  • 19x9.5 ET35 - qty 2
  • Black
  • Center Bore: PFS
  • Bolt Pattern: 5x120

19" Style SX 0503 Wheels - Square Set Of Four
BBS - Corporate Logo
T#:402783
Part#: SX0503CBKT
Direct Ship
$1,535.00
$1,535.00

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

SX wheels consist of a pressure cast wheel surface and a flow formed rim structure. Combining these two fabrication techniques yields a wheel that is extremely strong while remaining lightweight.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come in Crystal Black and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Please Note: Aggressive fitment, may require fender rolling or pulling.

Specs:

  • 19x8.5 ET32 - qty 4
  • Crystal Black
  • Center Bore: PFS
  • Bolt Pattern: 5x120
18" Style XA 0201 Wheels - Square Set Of Four
BBS - Corporate Logo
T#:402911
Part#: XA0201BPKKT
Direct Ship
$1,380.00
$1,380.00

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

XA Wheels are pressure cast using BBS own technology to produce an extremely strong and lightweight alloy.

Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.

These wheels come in Satin Black with a diamond cut face and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Please Note: Aggressive fitment, may require fender rolling or pulling.

Specs:

  • 18x8.5 ET35 - qty 4
  • Satin Black with a diamond cut face
  • Center Bore: PFS
  • Bolt Pattern: 5x120
18" Style RF 513 Wheels - Square Set Of Four
BBS - Corporate Logo
T#:402904
Part#: RF513DBKKT
Direct Ship
$2,980.00
$2,980.00

BBS Wheels combine decades of race proven quality and German engineering with stunning good looks. Utilizing the most cutting-edge manufacturing technologies based on a foundation of constant innovation continues to propel BBS into the future.

RF style wheels combine a lightweight forged construction with an eye-catching yet tasteful design to bring you some of the finest two-piece wheels on the market.

Forged wheels are created by crushing a solid block of aluminum into the desired shape using an extreme amount of pressure. This creates a wheel that is incredibly strong while remaining relatively lightweight. Using FEM analysis the engineers at BBS are able to precisely measure and optimize wheel properties before this process even begins. Once the forging process is complete, the meticulous finish work begins.
Back-milling is a process used to optimize the ratio between weight and stability. Using advanced computer analysis and a special CNC milling process the lateral parts that hold the wheel spokes, and are not relevant for stability, are removed. Extensive real-world simulation is used at this point to further ensure that no strength or stability has been lost.
Finally, BBS pays special attention in machining the undercut or back side of the wheel. To machine the undercut, all areas on the inner side of the wheel and the star hub that correspond to weight optimization are processed with special turning or milling tools and excess material is removed to reduce the rotating wheel mass. Special attention is hereby given to the optimization of the inner sides of the spokes and the bolt circle. With the application of these methods, BBS is able to produce more complex forms with increased stability and less material input.
These wheels come with a black painted finish and BBS ensures that their paint quality exceeds OE manufacturer specifications for durability and longevity. A final protective clear coat layer ensures that these wheels will be easy to clean and look amazing for years to come.

Please Note: Aggressive fitment, may require fender rolling or pulling.

Specs:

  • 18x8 RS Wheels - qty 4
  • Diamond Black
  • Offset: 35mm
  • Center Bore: 72.5mm
  • Bolt Pattern: 5x120