BMW Oil Filters & Oil Filter Kits for BMW 3 Series E46 (1999-2005)

Clear BMW chassis
What is more important to your engine than its oil supply? You can change your oil as many times as you want but if you don't change the oil filter you might as well dump the old oil back in! Replace your oil filter with every oil change (per BMW's recommendation) and you'll never worry about dirty oil again. We supply filters from the OEM Suppliers to BMW - Mahle, Mann, or OE BMW.

Genuine BMW Oil Drain Plug with Washer- E8X F22/3 F8X E30 E36 E46 E9X F3X E12 E28 E34 E39 E6X F07/10/11 G30/1 E24 F06/12/13 E32 E38 F01/02 F48 G01 F25/26 F15/16 E7X
Genuine BMW Oil Drain Plug with Washer- E8X F22/3 F8X E30 E36 E46 E9...
This genuine BMW replacement oil drain plug with washer i...
Genuine BMW - Corporate Logo
T#:369095
Part#: 11137535106
In Stock
$6.38
Free Shipping on orders $99 and up

This genuine BMW replacement oil drain plug with washer is perfect to replace your old beat up or stripped oil plug for easy removal and oil changes.

Fits the following BMW chassis:
E8X F22/3 F8X E30 E36 E46 E9X F3X E12 E28 E34 E39 E6X F07/10/11 G30/1 E24 F06/12/13 E32 E38 F01/02 F48 G01 F25/26 F15/16 E7X

Genuine BMW Oil Travel Case for 1 liter Bottle
Genuine BMW Oil Travel Case for 1 liter Bottle
This Genuine BMW oil travel case is perfect for holding a...
Genuine BMW - Corporate Logo
T#:12869
Part#: 83292158848
In Stock
$5.79
Free Shipping on orders $99 and up
This Genuine BMW oil travel case is perfect for holding a 1 liter /1 quart oil bottle for topping up between oil changes. The case has 3 velcro strips on the back to secure the case inside of the trunk. Case includes 2 hand wipes, 2 laminated cardboard funnels, 2 plastic gloves, and 2 cleaning cloths.
Genuine BMW Oil Drain Plug with Washer - S54 S65 S85
Genuine BMW Oil Drain Plug with Washer - S54 S65 S85
This genuine BMW replacement oil drain plug with washer i...
Genuine BMW - Corporate Logo
T#:369408
Part#: 07119904550
In Stock
$3.90
$3.90

This genuine BMW replacement oil drain plug with washer is perfect to replace your old beat up or stripped oil plug for easy removal and oil changes.

Fits the following BMW engines:
S54, S65, S85


Genuine BMW Oil Filter Kit - S50 S52 S54
Genuine BMW - Corporate Logo
T#:348232
Part#: 11427833769
In Stock
27% off MSRP $25.48
$18.72
Free Shipping on orders $99 and up
27% off MSRP $25.48
$18.72
Free Shipping on orders $99 and up

Genuine BMW Screw Plug 07119904550
Genuine BMW Screw Plug 07119904550
GENUINE BMW SCREW PLUG 07119904550
Genuine BMW - Corporate Logo
T#:6394
Part#: 07119904550
In Stock
$2.59
Free Shipping on orders $99 and up
GENUINE BMW SCREW PLUG 07119904550
Genuine BMW Oil Filter Kit - M52 M54
Genuine BMW - Corporate Logo
T#:360649
Part#: 11427512300
In Stock
27% off MSRP $16.02
$11.73
Free Shipping on orders $99 and up
27% off MSRP $16.02
$11.73
Free Shipping on orders $99 and up

Schwaben 36mm 6-Point Oil Filter Socket - 3/8" Drive
Schwaben 36mm 6-Point Oil Filter Socket - 3/8" Drive
Our 3/8-inch drive, 36mm, 6-point socket grips tight and ...
Schwaben - Corporate Logo
T#:368924
Part#: OC-03
In Stock
$15.95
Free Shipping on orders $99 and up

Our 3/8-inch drive, 36mm, 6-point socket grips tight and wonaEURtmt slip. Low profile oil filter housing removal socket fits in tight places.

  • BMW M52 and M54
  • MINI Gen 1 (R50, R52, and R53)

Billet Aluminum Oil Filter Housing Cap - M52 M54
Billet Aluminum Oil Filter Housing Cap - M52 M54
Turner Motorsport trusts ECS Tuning's Billet Alum...
ECS - Corporate Logo
T#:363055
Part#: 002605ECS01A
In Stock
$95.95
Free Shipping

Turner Motorsport trusts ECS Tuning's Billet Aluminum Oil Filter housing cap to make M52 and M54 oil changes much simpler.

BMW uses a lot of plastic in their engine components to save weight and money. Unfortunately, plastic is damaged easily and the factory oil filter cap needs a special tool to remove. This aluminum cap is much more durable and features a standard 17mm hex and 36mm hex posts on the top. 17mm is also the size of your engine oil drain plug, reducing the number of tools that you need to complete an oil change.

This cap is designed to use the original o-ring seal so no special parts are required. You only have to remove the original 'filter cage' from the original cap and transfer it to the new aluminum cap. The satin black anodize blends in with the rest of your engine bay making this a smart and subtle upgrade.

This replaces OEM Part Number 11421744000


Magnetic Oil Drain Plug for Most BMWs
Magnetic Oil Drain Plug for Most BMWs
Turn your oil drain plug into an effective metal particle...
MTC - Corporate Logo
T#:1798
Part#: TMS1798
In Stock
$12.95
Free Shipping on orders $99 and up
Turn your oil drain plug into an effective metal particle filter! This drain plug fits virtually all BMWs, and has a SUPER strong magnet built into it's tip, trapping iron and steel contaminants and safely removing them from the circulation.

This is a must for ALL BMWs, and simply installs in place of your existing drain plug. With every oil change you perform on your BMW, you'll be able to inspect for metal shavings and debris. Many times, if something is going wrong on your BMW's engine, the drain plug can give you an early warning. Our championship race team uses this info all the time (Ever find a piece of a valve spring in your oil? We have!) Be sure to get one now, and make the swap next oil change!

This magentic drain plug most BMWs (except pre-1980's). It includes a new/fresh copper washer.

** Requires thin wall socket and very slight trimming of the undertray for E46 M3, Z4M, Z3M with S54 engine **


This item fits the following BMWs:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
1997-2003 E39 BMW 525i 528i 530i M5
2004-2005 E60 BMW 525i 530i
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
2004-2006 E83 BMW X3 2.5i X3 3.0i
2000-2006 E53 BMW X5 3.0i
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2005 Z4 BMW Z4 2.5i Z4 3.0i

OEM Oil Filter - E36 E46 E39 E60 X3 X5 Z3 Z4 - M52 M54 engine
OEM Oil Filter - E36 E46 E39 E60 X3 X5 Z3 Z4 - M52 M54 engine ...
Replacement oil filter kit for many BMW 6-cylinders engin...
Mann - Corporate Logo
T#:3801
Part#: 11421427908
In Stock
$5.95
Free Shipping on orders $99 and up
Replacement oil filter kit for many BMW 6-cylinders engines with black plastic oil filter cap. (see list below); Fits M52/M54 engines with the black plastic cap on the oil filter housing (not aluminum). Mahle, Mann, or Hengst brand. Alternate part # 11427512300

This filter fits the following BMWs:

1996-1999 E36 3 Series - 328i, 328is, 328ic (no M)
1999-2005 E46 3 Series - 323i/323Ci, 328i/328Ci, 325i, 325Ci, 325xi, 330i, 330Ci, & 330xi (no M)
1997-2003 E39 5 series 6 cyl - 525i, 528i, 530i
2004-2005 E60 5 Series 6 cyl - 525i, 525xi, 530i, 530xi
2004-2006 X3 - including X3 2.5i, X3 3.0i
2000-2006 X5 6 cylinder, X5 3.0i
1997-2002 Z3 Roadster - Z3 2.3, Z3 2.5, Z3 2.8 & Z3 3.0 (**no M)
2003-2005 Z4 Roadster - Z4 2.5i, Z4 3.0i (**no si or 2006+)
aFe Pro GUARD D2 Oil Filter - M50 M52 M54
aFe Pro GUARD D2 Oil Filter - M50 M52 M54
Pro-GUARD D2 Oil Filters are the next generation in oil f...
AFE - Corporate Logo
T#:372894
Part#: 44-LF022
In Stock
$12.35
Free Shipping on orders $99 and up

Pro-GUARD D2 Oil Filters are the next generation in oil filter technology. Pro-GUARD D2 Oil Filters deliver increased flow and efficiency that are demanded from performance gas applications. This cartridge style filter comes with a built-in seal for a hassle free installation.

    K&P Engineering High Performance Stainless Steel Micronic Oil Filter - M50 M52 M54
    K&P Engineering High Performance Stainless Steel Micronic Oil Fi...
    Stainless steel filtration is not a new technology but is...
    K&P Engineering - Corporate Logo
    T#:402537
    Part#: S37
    In Stock
    $99.00
    Free Shipping

    Stainless steel filtration is not a new technology but is quickly gaining popularity in the automotive segment. With the ability to filter down as small as a paper filter element with the ability to be washed and reused!

    The K&P Engineering filter element is made from medical grade, type 304 stainless steel micronic filter cloth to provide unmatched protection against oil contamination and resultant engine damage. A one inch square of this material flows an incredible 1.9 gallons of oil per minute at only 1 PSI pump pressure. The adhesive used in the filter assembly process is good to 600 degrees Fahrenheit, far above normal engine operating temperatures. A super strength nickel-plated neodymium rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil. The sophisticated bypass is engineered for proper differential pressures and consistent operation, delivering a greater percentage of filtered oil while being very easy to clean. The twist lock design assures positive filter element placement and allows for easy disassembly, inspection, and cleaning. The quad-ring gasket doubles the seal between the filter and the engine. Finally, the filter housing is carved out of solid 6061T6 billet aluminum, which not only looks trick but aids in dissipating heat.

    K&P Engineering manufactures stainless steel filters for a vast array of engines around the world. Staying at the forefront of design and testing allows this company to offer a top-tier product for your European vehicle.

    Features:

    • Consistent filtering across entire filter surface
    • Superior ASTMF316 filtration performance
    • Magnetic Prefiltering
    • Progressive rate bypass combined with high flow characteristics of the filter media avoids unfiltered oil bypassing the filter during cold startup and high rpm
    • Easy inspection of engine contamination
    • Proven in Motorsports, Military and Aerospace applications for years. Technology is FAA approved for use in aircraft.

    At regular oil changes, clean to K&P's specifications for continued used - a true lifetime filter.

    This part fits the following BMWs:
    1991 - 1999 E36 Coupe 323i 325is 328i
    1993 - 1999 E36 Convertible 323i 325i 328i
    1990 - 1999 E36 Sedan 325i 328i
    1989 - 1995 E34 525i, 530i,
    1998 - 2004 E39 Touring 525i 528i
    1996 - 2004 E39 Sedan 525i 528i 530i
    1999 - 2001 E46 Convertible 323ci 325ci 330ci
    2002-2006 E46 Convertible 325ci 330ci
    1998 - 2001 E46 323ci 325ci 330ci M3
    2002 - 2006 E46 325ci 330ci
    1998 - 2001 E46 Touring 323i 325i
    2002 - 2006 E46 Touring 325i 325xi
    1998 - 2001 E46 Sedan 323i 325i 328i 330i
    2002 - 2006 E46 Sedan 325i 325xi 330i 330xi
    2000 - 2006 E53 X5 SUV X5 X5 3.0i



    K&P Engineering High Performance Stainless Steel Micronic Oil Filter - S50 S52 S54
    K&P Engineering High Performance Stainless Steel Micronic Oil Fi...
    Stainless steel filtration is not a new technology but is...
    K&P Engineering - Corporate Logo
    T#:402540
    Part#: S21
    In Stock
    $99.00
    Free Shipping

    Stainless steel filtration is not a new technology but is quickly gaining popularity in the automotive segment. With the ability to filter down as small as a paper filter element with the ability to be washed and reused!

    The K&P Engineering filter element is made from medical grade, type 304 stainless steel micronic filter cloth to provide unmatched protection against oil contamination and resultant engine damage. A one inch square of this material flows an incredible 1.9 gallons of oil per minute at only 1 PSI pump pressure. The adhesive used in the filter assembly process is good to 600 degrees Fahrenheit, far above normal engine operating temperatures. A super strength nickel-plated neodymium rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil. The sophisticated bypass is engineered for proper differential pressures and consistent operation, delivering a greater percentage of filtered oil while being very easy to clean. The twist lock design assures positive filter element placement and allows for easy disassembly, inspection, and cleaning. The quad-ring gasket doubles the seal between the filter and the engine. Finally, the filter housing is carved out of solid 6061T6 billet aluminum, which not only looks trick but aids in dissipating heat.

    K&P Engineering manufactures stainless steel filters for a vast array of engines around the world. Staying at the forefront of design and testing allows this company to offer a top-tier product for your European vehicle.

    Features:

    • Consistent filtering across entire filter surface
    • Superior ASTMF316 filtration performance
    • 7 times the flow of comparable paper oil filters
    • Magnetic Prefiltering
    • Progressive rate bypass combined with high flow characteristics of the filter media avoids unfiltered oil bypassing the filter during cold startup and high rpm
    • No more cutting apart messy paper filters for trapped debris inspection
    • Proven in Motorsports, Military and Aerospace applications for years. Technology is FAA approved for use in aircraft.

    At regular oil changes, clean to K&P's specifications for continued used - a true lifetime filter.

    This product fits the following BMWs:
    1995 - 1999 E36 M3
    2001 - 2006 E46 M3
    1998 - 2002 E36/8 Z3 M Coupe
    1998 - 2002 E36/7 Z3 M Roadster
    2006 - 2008 E86 Z4 M Coupe
    2006 - 2008 E85 Z4 M Roadster

    Mahle OEM Oil Filter for E46 M3, MZ3, MZ4 (S54 Engines)
    Mahle OEM Oil Filter for E46 M3, MZ3, MZ4 (S54 Engines)
    This is the replacement OEM oil filter kit for the S54 en...
    Mahle - Corporate Logo
    T#:4405
    Part#: 11427833769ML
    Direct Ship
    $9.95
    $9.95
    This is the replacement OEM oil filter kit for the S54 engine, as used in the E46 M3, Z4 M Roadster and M Coupe, as well as the 2001-2002 MZ3 M Roadster/Coupe (with S54 engine). This is the complete oil filter kit - filter, large o-ring for filter housing cover, small o-ring for bolt seal, flat washer for bolt, and copper seal ring for the drain bolt. It's everything you would need to complete an oil change - minus the Castrol 10W60 oil of course, which we sell at a great price. This kit is manufactured by Mahle - the original supplier to BMW for the 11427833769 BMW filter (factory filters come with the Mahle part number OX 187 printed on the cap).

    Why Mahle over Mann? In the past we have sold a few different oil filters for the E46 M3 and S54 engines. But Mahle is the true OEM supplier for this part number. It fits perfectly and is the exact replacement part at nearly the same price as the slightly different Mann filter (and less than the factory BMW filter). For more detail, click here.

    This filter fits the following BMWs:
    2001-2006 E46 M3
    2001-2002 MZ3 - M Roadster & M Coupe (S54)
    2006-2008 MZ4 - M Roadster & M Coupe
    OEM Hengst Engine Oil Filter Kit - S50 3.0L, S52 S54 3.2L
    OEM Hengst Engine Oil Filter Kit - S50 3.0L, S52 S54 3.2L
    This is an OEM Hengst oil filter kit made with the same m...
    Hengst - Corporate Logo
    T#:568562
    Part#: 11427833769
    Direct Ship
    New Item
    $13.50
    $13.50
    This is an OEM Hengst oil filter kit made with the same materials and design as the original oil filter used in BMW dealers (but at a better price!). The kit includes the oil filter, housing cap o-ring, and washer.