Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW E46-Parts Specials, Deals & Discounts

You're currently viewing parts for your (E46) 3-Series 1999-2005. Reset your chassis
For accurate results, specify your model below.
Universal Silicone 90 Elbow - 60mm - 2 3/8' ID Black Forge Motorsport universal 90 degree elbow with a 60mm diameter.
Forge
Part #: A90-60B
Price: $26.10 (USD) 
$29.00 (Sale - Save 10%)
Direct Ship
Quantity:   
6MM Silicone Vacuum Hose - Blue - 9 Feet Car suffering from vacuum leaks? This vacuum hose has a 6mm inner diameter. 
Forge
Part #: vc06
Price: $19.76 (USD) 
$21.95 (Sale - Save 10%)
In Stock
Quantity:   
3MM Silicone Vacuum Hose - Red - 9 Feet Car suffering from vacuum leaks? This vacuum hose has a 3mm inner diameter. 
Forge
Part #: vc03r
Price: $13.46 (USD) 
$14.95 (Sale - Save 10%)
In Stock
Quantity:   
E46 M3 Borla Midpipe / X-Pipe Section: section1, section 2
Installation: bolt-on to header/cat, clamp in the middle, bolt-on to muffler
Power Gain: +1-2hp

This Borla V2 midpipe for the E46 M3 is one of the best products for reducing the M3's infamous rasp sound. Borla places a high-flow resonator and x-pipe section far up in the system and that will alter the engine note to be deeper and more rumble than rasp. This is a bolt-on system to the Borla mufflers and most other stock or aftermarket headers and mufflers. No cutting or welding which makes it fully reversible if you ever went back to stock or sold the car. No factory emissions equipment is affected either.

Every Borla is made with 304 stainless steel for the internals and muffler body. Unlike other systems that can use coated aluminum, mild steel, or 409 stainless, the Borla uses true 304 stainless on the inside as well as the outside. This prevents it from rusting and deteriorating from the inside out. Borla guarantees every muffler with a 1,000,000 mile warranty. Turner Motorsport has been the leading Borla dealer for BMW exhausts since we sold our first system in 1996, including using Borla Exhausts on every Turner BMW racecar.

Applications:
2001-2006 E46 M3
Borla
Part #: 60090
Price: $866.85 (USD) 
$973.99 (Sale - Save 11%)
Direct Ship
Free Shipping Free Shipping
Quantity:   
Borla Sport Exhaust Rear Mufflers with Round Tips - E46 M3 Section: rear mufflers
Installation: bolt-on
Tip Style: quad round Borla angle cut
Power Gain: +12hp

These Borla mufflers will give your M3 a bit more growl and presence. These are stainless steel, high-flow mufflers that bolt on to the stock center section (or Borla midpipe). The stock M3 muffler is very large and softens the S54's exhaust note quite a bit. The Borla mufflers are much smaller and lighter with much-improved flow that increases horsepower and performance. Borla compared their mufflers with a common aftermarket brand and found their's flowed 10% better ( click here for Borla comparison ). The Borla system saves over 20lbs from the stock muffler.

Every Borla is made with 304 stainless steel for the internals and muffler body. Unlike other systems that can use coated aluminum, mild steel, or 409 stainless, the Borla uses true 304 stainless on the inside as well as the outside. This prevents the muffler from rusting and deteriorating from the inside out. Borla guarantees every muffler with a 1,000,000 mile warranty. Turner Motorsport has been the leading Borla dealer for BMW exhausts since we sold our first system in 1996, including using Borla Exhausts on every Turner BMW racecar.

Applications:
2001-2006 E46 M3
Borla
Part #: 140034
Price: $1390.17 (USD) 
$1561.99 (Sale - Save 11%)
Direct Ship
Free Shipping Free Shipping
Quantity:   
Upper Spring Hats/Perches (Pair) - 60mm / 16mm Pin / Square Seat Made in the USA These aluminum upper spring hats are for coil over struts with a 60mm coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

Spring I.D.Strut Pin Diam.Strut Pin Seat
60mm16mmsquare

Turner Motorsport
Part #: TSU998063B
Price: $56.95 (USD) 
$59.95 (Sale - Save 5%)
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Upper Spring Hats/Perches (Pair) - 2.5 Inch / 16mm Pin / Tapered Seat Made in the USA These aluminum upper spring hats are for coil over struts with a 2.5" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

Spring I.D.Strut Pin Diam.Strut Pin Seat
2.5"16mmtapered

Turner Motorsport
Part #: TSU9980550
Price: $56.95 (USD) 
$59.95 (Sale - Save 5%)
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Tool - 32mm / 36mm Fan Clutch and Oil Filter Cap Open-End Wrench Why buy two tools when you can get one that will do many jobs like this open end wrench? It is great for removing and installing the fan clutch and plastic oil filter cap. Also works great for removing and installing the VAN0S solenoid on M50 engine family. Use the same tools the Turner Motorsport techs use!
Turner Motorsport
Part #: TMI9910334
Price: $44.39 (USD) 
$64.95 (Sale - Save 32%)
$64.95
Limited Qty Sale
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Genuine BMW Coffee Mug & $100 Turner Motorsport Gift Certificate Special Gift Package! This BMW holiday gift package includes a $100 Turner Motorsport gift certificate (the perfect gift for any BMW enthusiast) and a Genuine BMW ceramic coffee mug. That's essentially a free authentic BMW coffee mug to give for that BMW lover on your shopping list.
Packaged by Turner
Part #: BMW-MUG-100TMS
Price: $100.00 (USD) 
$119.40 (Sale - Save 16%)
Ships in 5 days
Free Shipping Free Shipping
Quantity:   
Schwaben Locking Service Cart

An important factor when it comes to automotive work other than having the right tool for the job is how to keep those tools organized. The locking Service cart really comes in handy when you need to keep the tools you're using in place, but don't want to leave them out for theft.

 

Features:

  • Thru tray frame construction for stable support
  • 3" deep locking drawer with full extension roller bearing drawer slides
  • Chrome plated 16 gauge box frame and handles
  • 350 lbs load capacity supports heavy tools and equipment
  • Large, easy to maneuver 4" ball bearing swivel casters (2 are locking)
  • Beautiful & durable high gloss black powder coated finish
  • Height  - 35.3"
  • Length  - 30"
  • Depth - 16"
  • Weight  - 64.45lbs
Schwaben
Part #: 006692SCH01A
Price: $134.96 (USD) 
$179.95 (Sale - Save 25%)
In Stock
Quantity:   
S54 Valve Shim Installation Tool - E46 M3, Z3M, Z4M This is the genuine BMW valve shim installer tool with magnet.

This item fits the following BMWs:
2001-2006 E46 BMW M3, M3 Convertible
2001-2002 Z3 BMW M Roadster M Coupe
2006-2008 Z4 BMW Z4 M Roadster M Coupe
Genuine BMW
Part #: 83300493743
Price: $24.47 (USD) 
$32.89 (Sale - Save 26%)
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
E46 M3 H&R Coil Over Suspension

The H&R Coil Over kit takes the traditional shock/spring package one step further. H&R combines their progressive-rate springs with specially valved shocks and adds height adjusters that let you set the ride height to your own personal tastes. These coil overs are designed for street use with progressive rate springs that start out soft and stiffen as they are compressed. This helps to keep the ride compliant while still giving better handling and balance.

H&R designs each suspension to work as a coil over. This means that the correct amount of travel has been built into each shock. And the shocks are valved specifically for the spring rates to give a tight and controlled ride without being harsh or ultra-stiff. Each H&R coil over is TUV tested and approved and meets ISO quality standards. These are used with the stock strut and shock mounts for a quick and easy install.

SPECIAL PRICING FOR A VERY LIMITED TIME!
FREE GROUND SHIPPING
 

Height adjustment range:
F: -1.2-2.3"
R: -.75-1.5"

This coilover kit fits the following BMWs:
2001-2006 E46 BMW M3

H&R
Part #: 50415
Price: $1194.95 (USD) 
$1700 (Sale - Save 30%)
Direct Ship
Free Shipping Free Shipping
Genuine BMW Driving Mens Gloves with M logo These Genuine BMW Leather driving gloves feature side zip closure for snug fit and M logo at wrist. 95% Cabretta leather/5% neoprene. Choose Size Below.
Genuine BMW
Part #: 80160435736X
Price: $34.93 (USD) 
$40 (Sale - Save 13%)
In Stock
Free Shipping Free Shipping
on orders $99 and up
Headlight Lens - Left - E46 4 door - 2002-2005 - ZKW Brand Are your headlight lenses cloudy, yellow or sandblasted? Replace your damaged headlight lens with this new genuine BMW cover. NOTE: This lens will only work with ZKW brand headlights - please check for the ZKW logo on your existing lens.

This item fits the following BMWs:
2002-2005 E46 BMW 325i 325xi 330i 330xi
only for with ZKW brand headlights
Genuine BMW
Part #: 63126923411
Price: $129.69 (USD) 
$146.95 (Sale - Save 12%)
In Stock
Free Shipping Free Shipping
Genuine BMW M T-Shirt - Red These red tshirts feature the BMW M logo on left chest. 100% cotton
Genuine BMW
Part #: TMS338512
Price: $27.26 (USD) 
$32 (Sale - Save 15%)
Ships in 4 days
Free Shipping Free Shipping
on orders $99 and up
E46 330i/ci 03-06 Stage 1 Turner Motorsport Performance Package 3/2003-2006 E46 330i/Ci Stage 1 Performance Package
Peak Power Gain: +12hp / +10ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and performance software. The aFe intake is made with heat-blocking materials, reducing underhood temperatures and not contributing to heat soak of the air filter. aFe uses an oiled cotton air filter for maximum air flow and excellent filtration. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

The software is also Conforti-tuned and supplied with the Shark Injector software loader. The Shark Injector is a do-it-yourself reflash tool that plugs into the diagnostic plug in the engine bay. With the push of a button, it will copy your stock software and reflash your computer with the performance tune. You can set it back to stock at any time by following the same procedure.

Both of these items are packaged and work together. They provide a solid performance boost with a low upfront cost. For an excellent 'bang for the buck' upgrade, the software and intake are a great choice (TMS Underdrive Pulleys would also be on that list).

Related Upgrades: We are often asked what would complement our software and intake packages. Within any Stage, we recommend our Underdrive Power Pulley Kits. The Power Pulley Kit will under-drive the alternator, water pump, and power steering pump. Under-driving means each component is moving slower which requires less power. The saved horsepower is put back to the engine where it transfers to power at the wheels. Power gains are typically 10 horsepower at the wheels.

We also recommend upgrading the cat-back muffler for slightly more performance, lighter weight, and a more-aggressive sound. Our favorite E46 mufflers are the Supersprint, Borla, or Corsa exhausts. The Supersprint is the quietest and most like stock while the Corsa is the most aggressive (Borla being in the middle). You can expect a gain of 5whp with any of these exhausts.

3/2003-2006 E46 330i/Ci Stage 1 Engine Upgrade Kit includes:
aFe Cold Air Intake (oiled cotton filter, heat shield, intake tube)
Shark Injector performance software

Applications:
3/2003-2006 E46 330i sedan, 330Ci coupe and convertible (check your driver's door pillar for production date data)
Packaged by Turner
Part #: TMS2851
Price: $713.10 (USD) 
$748 (Sale - Save 5%)
In Stock
Free Shipping Free Shipping
E46 M3 Shark Injector Euro Performance Software (for Euro Header/Catalyst)

Shark Injector Performance software includes:

  • Tuned specifically for factory Euro Headers and Cats
  • Horsepower and torque gains
  • Faster and smoother throttle response
  • Top speed limiter removed
  • Extremely easy to install/uninstall
  • Reversible and reusable

Performance software is a must-have upgrade on your E46 M3 and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!

The M3 performance software was developed on the dyno to create maximum power and torque using premium 93+ octane fuel and revising the torque limiters in the ECU. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. Choose between a stock or raised 8,100 RPM rev limit. The top speed limiter is removed. By fine tuning these maps we've been able to improve the S54 engine beyond what BMW did by making more power and torque and a smoother-running engine.

The Shark Injector plugs into the diagnostic port inside the E46 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.

Looking to maximize your power gains? Add a Turner IAT Relocation to combat power-robbing heat soak - the only true plug-and-play solution available. Heat soak is a real plague on consistent power for a stock or tuned vehicle.


E46 M3 Dyno
Power and Torque Gains
Stock: 278.2 rear wheel Horsepower, 235.3 rear wheel Torque
Sharked: 287.3 rear wheel Horsepower, 242.1 rear wheel Torque
Peak Gain: 9.1 rear wheel Horsepower and 6.8 rear wheel Torque
(Torque gain is significant between 3000-6000 rpm, with a max gain (biggest improvement) of 14 lb-ft rear wheel Torque @ 4340 rpm)

This performance software was developed specifically for the factory M3 Euro headers and stock Euro cats. Early in our E46 software development we found that the Euro headers and cats made a significant torque gain over the US spec but special software was needed to get the most out of them and to address some of the differences (Euro EGT sensor is in a different spot). The factory Euro headers and cats remain the top choice for performance and OEM quality.

Shark Injector Installation Instructions
(click to expand)
Shark Injector FAQ
(click to expand)

This software alters the federally-mandated emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. TMS does not guarantee or promote that this software will pass a federal or state or local emissions test. You can download the waiver here.

This item fits the following BMWs:
2001-2006 E46 BMW M3 (US models only)
Shark Injector
Part #: TMS1054
Price: $314.10 (USD) 
$349 (Sale - Save 10%)
Ships in 2 Days
Free Shipping Free Shipping
Headlight Lens - Right - E46 4 door - 2002-2005 - ZKW Brand Are your headlight lenses cloudy, yellow or sandblasted? Replace your damaged headlight lens with this new genuine BMW cover. NOTE: This lens will only work with ZKW brand headlights - please check for the ZKW logo on your existing lens.

This item fits the following BMWs:
2002-2005 E46 BMW 325i 325xi 330i 330xi
only for with ZKW brand headlights
Genuine BMW
Part #: 63126923412
Price: $129.69 (USD) 
$146.95 (Sale - Save 12%)
In Stock
Free Shipping Free Shipping
Genuine BMW E46 Convertible Floor Mats - Convertible Only Factory floor mat set (4 piece) for 2000-2006 E46 3-series converibles and cabrios. Available in your choice of 3 factory color options (black, sand beige/tan, or grey). These mats include the velcro fasteners pads, which screw into the recepticles in your carpet (previously a "clip in" recepticle, now replaced by the easy and tight gripping velcro pad). Nothing freshens the interior of your 3 series like a fresh set of high quality GENUINE BMW floor mats! These fit sedans and coupes (left hand drive only, no right hand drive models). Choose your color below.

These Genuine BMW E46 Convertible 3 Series Floor mats fit the following BMWs:
2000-2006 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci convertible models only
Genuine BMW
Part #: 8211002127X
Price: $112.98 (USD) 
$130 (Sale - Save 13%)
In Stock
Free Shipping Free Shipping
E46, Z4 Differential Upgrade - 3.07 Original BMW Performance (ZHP) The 3.07 differential is an Original BMW part and used on the 330i ZHP Performance Package (manual transmission). This is a complete, fully-built differential that is a direct replacement swap for the stock 330i/ci 2.93 diff. On other models (323/325/328, Z4) you will need the 330's output shaft flanges (easy to install). You can find used output flanges online or we can sell you new flanges. The 3.07 gearing is 5% shorter than the stock 2.93 and will give a modest improvment in acceleration. Having the shorter ratio will put you in a better part of the RPM band for any given speed. This makes the car instantly quicker with more power and torque on tap. There's almost no downside aside from the higher revs will decrease fuel economy. Jumping from 2.93 to 3.07 is not a drastic change and was used by BMW to sell the ZHP package as a faster car than a standard 330i. For even better acceleration, try the 3.46 or 3.64 options in our custom differentials. The custom diffs will also give you a limited-slip option (this ZHP diff is still an open style).

This is an Original BMW part and carries the same BMW two year warranty as any other new BMW part. A core charge is required that can be refunded when your original diff is returned.

Example: 2002 330i, 5-speed manual, 245/40-17" rear tires
Gear RatioGearSpeedRPM
2.934th40 MPH2,000 RPM
3.074th40 MPH2,050 RPM
2.935th70 MPH2,800 RPM
3.075th70 MPH2,900 RPM
3.075th144 MPH*6,000 RPM
* - Theoretical speed for 3.07 gears at 6,000 RPM. It doesn't mean this speed is actually attainable. It's only offered for reference.

This item fits the following BMWs:
2001-2006 E46 BMW 330i 330ci 330xi, with manual transmission
1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci (requires 330 output flanges)
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si (requires 330 output flanges)
Genuine BMW
Part #: 33107508099
Price: $1731.81 (USD) 
$1950.38 (Sale - Save 11%)
Ships on Jul 6, 2018
Free Shipping Free Shipping
E46 323/325/328/330i/ci H&R SS Coil Over Suspension
  •  
  • Height adjustable to 1.2" - 2.6" Front, 0.75" - 2.0" rear.
  • Koni adjustable shock damping
  • H&R Street Performance SS Coil Overs are polished stainless steel shock tubes with adjustable Koni shocks matched to a specific set of springs. These new Coil Overs are shock damping adjustable allowing personalized tuning of the shock setting to suit driving needs for high performance or comfort. Height adjustability is made possible by fully threaded shock bodies and easy to adjust spring seats / locking rings. H&R ride development engineers have precisely plotted the perfect shock damping curves of each application for optimized handling and superb ride comfort. To ensure the best quality available H&R has partnered with world-renowned shock absorber specialist KONI to manufacture the shocks
  • Note-Lowering height will vary on vehicles with factory sport suspension.

SPECIAL PRICING FOR A VERY LIMITED TIME!
FREE GROUND SHIPPING
 

This coilover kit fits the following BMWs:

  • 1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci
H&R
Part #: 36480-2
Price: $1266.95 (USD) 
$1690 (Sale - Save 25%)
Direct Ship
Free Shipping Free Shipping
Genuine BMW Brushed Twill Hat Made from 100% recycled plastic bottles, this twill hat is a Genuine BMW accessory. Makes a great gift for any BMW owner. Adjustable back closure makes this hat "one size fits almost all" and allows for a comfortable fit. The interior is unstructured for a casual look (not a "trucker" hat.) Available in your choice of Blue, Stone (choose your color option below).
Genuine BMW
Part #: 8016043960X
Price: $15.72 (USD) 
$18 (Sale - Save 13%)
In Stock
Free Shipping Free Shipping
on orders $99 and up
Genuine BMW Mens Driving Gloves with Roundel Logo Genuine leather gloves are unlined and perforated at the knuckles for flexibility. Import.
Genuine BMW
Part #: TMS338524
Price: $33.66 (USD) 
$40 (Sale - Save 16%)
In Stock
Free Shipping Free Shipping
on orders $99 and up
Daytona 2014 Livery Decal Set for Fujimi BMW Z4 GT 2013 Model Build your own Turner Z4 GTD / GT3 1:24 Scale Model! This decal sheet contains livery graphics to model the Turner Motorsport BMW Z4 as raced at the 2014 Daytona 24 hours. Decals are die cut for accuracy and fitment. The livery decals were created using our original livery design files, so we can vouch for its overall accuracy. The completed model looks incredible!

This graphics decal set is specifically designed for the Fujimi brand 1/24th scale BMW Z4 2013 kit. Model sold separately. Assembly required
Turner Motorsport
Part #: MSH-94
Price: $9.00 (USD) 
$20 (Sale - Save 55%)
In Stock
Free Shipping Free Shipping
on orders $99 and up
Window Regulator - Front Right - E46 323i 325i 325xi 328i 330i 330xi E46 window regulators are a common failure item. We carry the latest updated Genuine BMW window regulator due to the high failure rate of many aftermarket units.

When replacing the window regulator there are several items you will likely need to replace. The door vapor barrier will likely be damaged during removal. If this is not replaced properly water can leak into the car. Our install kit includes the special butyl sealing tape required for a proper seal. There are also a number of small hardware clips and nuts that are one time use that you will need as well.

Optional Installation Kit includes:
51338242760 x 2 - Window Regulator Clips
07146951627 x 3 - Locking Nuts
51487114714 - Front Right Vapor Barrier
Butyl Tape

This item fits the following BMWs:
1999-2005 E46 BMW 323i 325i 325xi 328i 330i 330xi - Sedan and Wagon models
Genuine BMW
Part #: 51337020660
Price: $156.97 (USD) 
$177.87 (Sale - Save 12%)
Ships in 5 days
Free Shipping Free Shipping
Genuine BMW All Weather Rubber Floor Mats - E46 325xi 330xi Protect your interior from mud, snow, salt and water with these heavy duty rubber floor mats. These Genuine BMW E46 325xi/330xi rubber floor mats have deep channels designed to trap sand, snow, mud and winter debris to keep your factory carpeting nice and clean. Please choose your color below to match your interior. Fits Left Hand Drive models only.

Note: BMW changes floor mat designs and suppliers frequently. Actual product may differ from photo but the product you receive is the latest style and type from BMW.

This item fits the following BMWs:
1999-2005 E46 Sedan BMW 325xi 330xi
Genuine BMW
Part #: 8255013637X
Price: $47.80 (USD) 
$55 (Sale - Save 13%)
Ships in 5 days
Free Shipping Free Shipping
on orders $99 and up
E36, E46 HRE FF15 18x8.5/9.0

E36 incl M3, E46 non-M3 RWD HRE FlowForm 18" Wheel Set
Fr: 18x8.5" ET40
Rr: 18x9.0" ET44

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

The FF15 is a multispoke wheel (15 spokes) very similar to HRE's C109 forged 3-piece wheel. The FF15 comes in 18"-20" sizes but appear larger thanks to the long straight spokes that run right to the edge of the rim. The correct offsets locate the wheel in just the right position without the need for spacers and maintaining the proper clearances to the body, brakes, and suspension. The standard 18" color is Tarmac (black) with eleven optional finishes available too. Contact us for other sizes.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors

Optional Colors (+$500)

This item fits the following BMWs:
1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2006 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci

HRE
Part #: E36FF15188590
Price: $1840.00 (USD) 
$2300 (Sale - Save 20%)
Direct Ship
Free Shipping Free Shipping
E36, E46 HRE FF15 18x9

E36 incl M3, E46 non-M3 RWD HRE FlowForm 18" Wheel Set
Fr: 18x9.0" ET44
Rr: 18x9.0" ET44

HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

The FF15 is a multispoke wheel (15 spokes) very similar to HRE's C109 forged 3-piece wheel. The FF15 comes in 18"-20" sizes but appear larger thanks to the long straight spokes that run right to the edge of the rim. The correct offsets locate the wheel in just the right position without the need for spacers and maintaining the proper clearances to the body, brakes, and suspension. The standard 18" color is Tarmac (black) with eleven optional finishes available too. Contact us for other sizes.

The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

HRE FlowForm Wheel Features -
+ state-of-the-art technology
+ lighter and stronger than a cast wheel
+ stimulating looks
+ multiple color and finish options encourage personalization
+ lifetime structural warranty
+ TUV, VIA, and JWL approved

Colors and Finishes -
Standard Colors

Optional Colors (+$500)

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

This item fits the following BMWs:
1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2006 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci

HRE
Part #: E36FF15189044
Price: $1840.00 (USD) 
$2300 (Sale - Save 20%)
Direct Ship
Free Shipping Free Shipping
Schwaben 1/4 A convenient ratchet with 1/4" & 3/8" drive options. The perfect ratchet when you're on the go, reducing the amount of tools you need to carry in case of a road side repair.
Schwaben
Part #: P34472-32
Price: $9.71 (USD) 
$12.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
E46 325/330i/Ci Borla Sport Exhaust - Cat-Back Resonators, Muffler Section: center section with resonator, rear muffler (header/cat-back)
Installation: bolt-on to header, clamps elsewhere
Tip Style: dual round 76mm Borla angle cut
Power Gain: +5hp

Borla completely re-engineers the exhaust on the E46 325/330 with a tuned all-stainless cat-back system. The E46 Borla bolts straight to the factory manifold and uses all of the factory hangers for an easy and seamless install. Your factory exhaust can come off as one complete piece and bolt this in its place! This is a full stainless system - T304 inside and out for maximum corrosion resistance. The Borla flows better than the stock system too for increased performance, even over the stock ZHP system. But we love the sound of this system the most - deep and with plenty of rumble to set it apart from the stock sound. It's a tuned system, with front resonator and rear muffler, to be louder than stock but not excessive. It's also a lot lighter than the stock system at only 33lbs from nose to tailpipe.

Read what Borla owners have to say:
"The difference over stock is noticeable the instant you turn the key. It begins with a deep muted rumble at engine start. Between 1200-2000rpm, you are treated to a nice throaty (and somewhat loud) growl. Between 2500-3500rpm, the deep growl reveals a slightly deeper, more melodic mechanical rev-up. Once past 4500rpm, the car begins to sound surprisingly stock, all the way up to redline. Lifting off the gas reveals a slightly more pronounced "burble" that settles into a low rumble as revs drop back to idle. At steady cruising speeds, the exhaust does not drone. Planting your right foot brings back that wonderful low growl."
"...the Borla is a very well built unit. Very civilized exhaust note... more agressive, yet not obnoxiously loud."
"I can easily say the Borla exhaust is much better than the X&X exhaust. My brother has the Borla on his 330i ZHP, and I had the X&X on my 330i. The X&X exhaust didn't have the quality of engineering compared to the Borla. The X&X was louder, and had horrible resonation - unacceptable for street use. The Borla is bolt-on, excellent quality, and hangs perfectly straight. The sound is a bit louder than stock, yet never "rice" or obnoxious."

Every Borla is made with 304 stainless steel for the internals and muffler body. Unlike other systems that can use coated aluminum, mild steel, or 409 stainless, the Borla uses true 304 stainless on the inside as well as the outside. This prevents the muffler from rusting and deteriorating from the inside out. Borla guarantees every muffler with a 1,000,000 mile warranty. Turner Motorsport has been the leading Borla dealer for BMW exhausts since we sold our first system in 1996, including using Borla Exhausts on all of every Turner BMW racecar.

This item fits the following BMWs:
2001-2005 E46 BMW 325i 325ci 330i 330ci
Borla
Part #: 140084
Price: $1204.16 (USD) 
$1352.99 (Sale - Save 11%)
In Stock
Free Shipping Free Shipping
Quantity:   
American Racing Headers - Performance Long tube Header - E46 M3 S54

American Racing Headers is a performance exhaust manufacturer that specializes in high flow header systems. They have made a huge name for themselves since their creation in 2005 in the domestic world and are venturing into the Euro scene, now offering premium exhausts for BMW. Made 100% in the USA, located in Deer Park, New York, of 304 stainless steel and hand welded to ensure the best fitment possible, these headers and exhaust systems are perfect for high performance and long term durability. Within just a few years, the were noticed by the "Big-Three" auto giants in the US and were soon the Tier-One supplier of racing headers for the Ford Cobra Jet Mustang, General Motor's Copo Camaro, Chrysler's Drag Pack Challenger, and the Dodge ACR-X Viper.

Example of ARH E46 Header with Stock mid-section and Supersprint Rear Race Muffler (T#3467):


The stock S54 headers didn't exactly do the motor any justice when it came to performance. The catalytic converters were restrictive, the primary tubes were rather thin, and the dual desgin and basic collectors limited the amount of potential exhaust flow. ARH has taken action to resolve this issue and came out with their Performance Long Tube Headers.

Using 1-3/4" header primaries that are significantly larger than stock is the first major improvement. This allows immediate high flow and eliminates a potential restriction issue at higher RPM's. These are connected to a single piece mount made from 1/2" thick steel plate to prevent warping and are counter-bored so that the mounting is hassle free and lines up like OEM.

Next is the relocation of the catalytic converter. It is now located further down-stream after the collector. This manifold is available with or without the catalytic converter, giving you the option to build exclusively for the track or for split street and strip use. The cat has been upgraded to a performance 200-cell metallic-substrate catalytic converter for extreme durability and a long life.

The final major improvement is the custom in-house designed 6-to-1 merge collector. This is the most important part of the entire header system. The collector features a merge spike welded inside for a smoother transition and the primaries are arranged in a way that creates a vortex scavenging effect using the natural pulses of the engines exhaust. This helps pull the exhaust down to the the 3 inch choke, which increases the exhaust gases' velocity, then gradually increases back up to 3.5 inches.

All of these improvements taken into consideration lead to one final major result: More power throughout the RPM band in every gear, all the way to redline!

This racing header bolts up to the stock Section 2 mid-pipe and can be used with any cat-back exhaust! We recommend pairing this with your stock section two pipes and resonator and upgrading your rear muffler to the Supersprint Muffler (T#3467).

Product Features:

  • 100% Made in the USA - Never Outsourced
  • Made entirely of 304 stainless steel 
  • 3/8" thick laser-cut flanges for a warp-free seal
  • Hand-ported TIG welded inlets
  • Optimized primary tube routing for superior fit and performance
  • Merge collectors complete with welded scavenger spikes
  • Catted systems feature 200 cell metallic substrate catalytic converters for extreme durability 

If you decide you would like to purchase the catless headers: This part alters or deletes the emissions equipment on your car. Removing the primary cats will result in a check engine light and faults for the missing cats. Special software or modules will be required to prevent the codes but this setup will not be street legal. This was designed for race and track use only. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.


This fits the following vehicles:
2001-2006 E46 BMW M3

American Racing Headers
Part #: ARHE46M3HDR
Price: $2156.40 (USD) 
$2995 (Sale - Save 28%)
In Stock
Turner Motorsport SMG Shift Paddles

When we were designing these SMG shift paddles we kept the different types of BMW drivers in mind to offer a top quality product to everyone with SMG II and an M steering wheel. The final product ended up being the perfect blend of styling, smooth curves, and comfort in your fingers to appeal to both the daily enthusiast and race track driver.

Cut from 6061-T6 aluminum and anodized for corrosion resistance and interior preference and an optional pad for the back of the paddle for increased grip and comfort. The pad adheres to the back of the paddles and is designed from neoprene to resist any temperature discomfort on hot and cold days as well as resisting slippage from wet hands. Our in-house engineers gave special attention to the key details of the M3 cockpit to ensure the paddles have a seamless OEM+ fit and finish. Subtle design details allow the paddle to conform perfectly into gauge cluster, steering wheel, and other surrounding components while offering superior comfort at the driver’s finger tips due to the extensively detailed 3D machined pockets. 


Features:

  • Anodized 6061-T6 aluminum
  • Optional stick-on neoprene padding
  • Engineered in-house and made in the USA
Turner Motorsport
Part #: 013223TMS
Price: $161.96 (USD) 
$179.95 (Sale - Save 10%)
In Stock
Free Shipping Free Shipping
Turner Motorsport Front Adjustable Hybrid Street/Track Camber/Caster Plates - E46 M3

Building on years of building some of the most used (and talked about!) Street and Race camber plates for the E46 M3 has brought us to the next iteration of this key suspension component. Introducing the Turner Motorsport Hybrid Street/Track Caster/Camber Plate designed exclusively for the E46 M3. 

Front caster/camber plates play a key role in suspension configuration - providing a point to adjust alignment in the front of the vehicle. Without camber plates, it is not possible to dial in proper street and track alignment specifications to maximize handling and tire wear. A properly configured alignment is frequently the difference between a good car and a great car, trailing the pack and pace-setting lap times, frustrating tire wear and long tire life, or exhilarating handling and a car that fights through the turns. 

Understanding the needs of a track enthusiast, our Race camber plates allow for zero deflection and are ideal for a dedicated track vehicle. For a dedicated street vehicle, our Street camber plates are another tried-and-true option that are comfortable and perform very well. Hearing the call from customers that don't fall cleanly into one of these groups, we've designed the best of both worlds - a rebuildable polyurethane-isolated spherical bearing, or as we call it, a "hybrid" design. These camber plates deliver exceptional lifespan, high performance, with excellent road manners. 

We paid extra attention to the bearing we selected, knowing we needed a bearing that would not only be quiet, but reliable. Tens of thousands of street and track miles on a variety of applications yielded zero failures of the high quality PTFE-lined, maintenance-free stainless steel monoball spherical FK bearing. One of our secrets in enabling this high-performance bearing to function to its full potential is the 80a polyurethane isolation bushing. We identified just the right material density to allow for absorption of road noise while allowing dampers to articulate precisely and predictably. This tiny bit of cushion takes the brunt of potholes and rough roads, protecting the bearing from wear which may otherwise lead to premature failure. Equally critical to maximizing bearing life is the addition of dust seals to prevent moisture and dirt contamination.  To top it all off, the entire assembly is rebuildable in the event that, over the years, a component does wear out. 

By re-using the OEM spring perch and radial bearing, we've avoided supporting the weight of the vehicle on the strut shaft monoball - further extending the life of the bearing and mimicking a well-designed factory element. Spring perches for 60mm or 2.5" springs are also available; use of factory-style springs requires no additional perch. Inspect the shocks you plan on using these with, measuring the shock diameter (16mm or 14mm) and inspecting the seat (square or tapered) to ensure you select the correct kit for your application. Not sure which you need? Give us a call, we're happy to help. 

  • Adjustable camber (3+ degrees of adjustment) and caster (2.5+ degrees of adjustment) without removing strut from the vehicle
  • Wide plate assembly offers excellent load distribution to address concerns with strut tower deformation
  • Compatible with factory-style springs, or with the addition of available 60mm or 2.5" perches, race-style springs as well
  • Maintenance free, PTFE lined, stainless steel monoball spherical bearing for full shaft articulation
  • 80A polyurethane isolation bushings for noise, vibration, and harshness (NVH) control
  • Rebuildable bushing/bearing assembly with individually replaceable components

Turner Motorsport Hybrid Street/Track Camber Plates: content on the street, ready to rip on the track.

Click here for installation instructions.

This item fits the following BMWs:
2001-2006 E46 BMW M3

Turner Motorsport
Part #: 002593TMS04
Price: $449.96 (USD) 
$499.95 (Sale - Save 10%)
In Stock
Free Shipping Free Shipping
Turner Motorsport

These plates adjust camber with a fixed caster setting and have a lot of important motorsport-developed features that other camber kits do not. Race inspired from our Championship-winning E90 race cars in the Grand-Am/IMSA GS class. The location and angles for the main bearing were carefully engineered to allow the proper motion ratio and strut angles during adjustment. This greatly reduces bending forces on the strut itself which improves performance and longevity. By designing for one chassis we're able to focus on what works best in that application - proper fitment and operation without unnecessary adapters, easy-to-use camber and caster adjustments, and an intelligent modular design.
 

Since this design is specific to the E46, we can build it with the bare minimum of adapters and extra hardware. This not only cuts down on confusion but makes it easier to assemble and operate. We use the correct-sized bearing for the 16mm strut shaft; no sleeves or bearing adapters required. Only a small stainless steel spacer and the upper spring hats from your coil over kit are all that's required to install. We also produce the upper spring plates if you need them (see Additional Items below). We have used our camber plates with most of the major strut manufacturers on the market - AST, Koni Motorsport, Moton, Ohlins, MCS, Bilstein, and KW.

If you need upper spring hats for the top of the springs, see the Additional Items list below. We make upper spring hats for 60mm, 2.25" and 2.50" springs and in 14mm and 16mm strut pin sizes. If you don't see the spring hat that you need, click here for the full listing. Or call us directly.

Features:

  • Preserves the correct E46 geometry
  • Compatible with 60mm, 2.5", 2.25" springs
  • Maximum shock travel
  • Lightweight
  • Durable materials
  • Large surface area
  • Easy to use for fast camber changes

This item fits the following BMWs (w/ Race Coil Overs):
1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci 

Turner Motorsport
Part #: TSU4680MSTA
Price: $323.96 (USD) 
$359.95 (Sale - Save 10%)
In Stock
Free Shipping Free Shipping
Molygen New Generation Engine Oil (5w-40) - 1 Liter

New generation engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo and multi-valve compatibility, and long service life.

Properties:

  • Smooth engine running characteristics
  • Long engine service life due to exceptional protection against wear
  • Rapid oil delivery at low temperatures
  • Optimum oil pressure at all engine speeds
  • Premium lubrication reliability at high and low temperatures
  • High shear and ageing stability
  • Reduces fuel consumption and pollutant emissions
  • Outstanding engine cleanliness
  • Tested with catalytic converters and performance proven with turbochargers
  • Miscible and compatible with commercially-available engine oils

Approved for the following specifications:

  • ACEA C3
  • API SN / CF
  • VAG 502.00 / 505.00
  • BMW Longlife-01

 

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Liqui-Moly
Part #: 20230
Price: $8.45 (USD) 
$9.95 (Sale - Save 15%)
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
BMW Motorsport Motion T-Shirt This shirt is perfect for wearing to the track, in the garage, or even just lounging around the house. This cotton t-shirt has the tri-color ///M stripes on the right sleeve, with a BMW race car print of the front.
Genuine BMW
Part #: 801424464215
Price: $76.68 (USD) 
$90 (Sale - Save 15%)
Ships in 4 days
BMW Motorsport Fan T-Shirt With a simplified ///M design and a small, rubberized BMW roundel on the sleeve, this subtle and stylish shirt is a very comfortable way to show your love of BMW cars. Navy blue in color, this cotton round-neck t-shirt will look great no matter where you are, at work or play.
Genuine BMW
Part #: 8014244642630
Price: $57.94 (USD) 
$68 (Sale - Save 15%)
Ships in 4 days
Liqui-Moly Leichtlauf High Tech 5W-40 Engine Oil - 5 Liter

Leichtlauf High Tech engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo, multi-valve, and supercharger compatibility, and long service life.

Approved for the following specifications:

  • ACEA A3-08 / B4-08
  • API SN / CF
  • BMW Longlife-01
  • MB-Approval 229.5
  • Porsche A40
  • VAG 502.00 / 505.00

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Liqui-Moly
Part #: 2332
Price: $33.65 (USD) 
$37.39 (Sale - Save 10%)
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Schwaben European Car Electrical Terminal Tool Kit - 12 Pieces

This tool comes in handy especially when working with an engine harness. Certain areas are always prone to corrosion and this tool makes having to re-pin a connector a breeze.

Unlike small screwdrivers, picks, and paper clips, these tools are the correct size and shape to remove and install tiny electrical pins and terminals at plastic block connectors with ease, and will not damage the connectors in the process.

Packaged in a blow molded case to keep everything secure and organized.

Schwaben
Part #: ce-70-2
Price: $80.00 (USD) 
$89.95 (Sale - Save 11%)
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
6MM Silicone Vacuum Hose - Black - 9 Feet Car suffering from vacuum leaks? This vacuum hose has a 6mm inner diameter. 
Forge
Part #: vc06b
Price: $15.26 (USD) 
$16.95 (Sale - Save 10%)
In Stock
Quantity:   
5MM Silicone Vacuum Hose - Black - 9 Feet Car suffering from vacuum leaks? This vacuum hose has a 5mm inner diameter. 
Forge
Part #: vc05b
Price: $12.56 (USD) 
$13.95 (Sale - Save 10%)
In Stock
Quantity:   
Coil Spring Compressor Adapter Set

These spring compressor adapters are designed for specific BMW applications that have small springs. Designed to be used with Schwaben Spring compressor - T#386049. These adapters are to be used with strut removed from the spindle and designed to fully surround the strut housing. 

 

Schwaben
Part #: 001252SCH01A
Price: $44.95 (USD) 
$49.95 (Sale - Save 10%)
In Stock
Free Shipping Free Shipping
Quantity:   
E46 323/325, Z3 3.0, Z4 3.0 ECS Front Cross-Drilled & Slotted 2-Piece Brake Rotors - Pair (300x22)

These 2-piece floating rotors help dissipate heat better than a standard cast iron rotor and are also lighter for less unsprung weight. Managing heat in the brake system is vital to braking performance, especially on the track or when driven hard. It's why your brake rotors have internal vanes that vent heat as the rotor spins. These 2-piece ECS rotors feature an outer cast iron friction surface ring that is separate from the aluminum center hat. This allows better airflow through the vanes and for the friction ring can expand as it gets hot. The rotors are also cross-drilled for better ventilation and slotted to improve brake pad performance.

ECS 2-Piece Rotors feature:

  • Aluminum hats for light weight
  • Heat-treated cast iron friction rings
  • 2-piece assembly improves brake cooling
  • Anti-corrosion coating on non-friction surfaces and hard anodizing on rotor hat

These are the same size as the stock rotors so your stock caliper and mounting bracket will fit and there will be no clearance issues with your wheels or to other components. Stainless steel rotor retaining screws are included. You can use these with any brake pad.

Price is for the pair of brake rotors.

This item fits the following BMWs:
1999-2006 E46 BMW 323i Touring Wagon
1999-2006 E46 BMW 323ci Convertible
1999-2006 E46 BMW 325i 325ci 325xi 328i 328ci
2001-2002 Z3 BMW Z3 3.0i
2002-2008 E85 E86 BMW Z4 3.0 M54 Z4 3.0i N52

ECS
Part #: 011505ecs01KT
Price: $359.96 (USD) 
$454.95 (Sale - Save 21%)
In Stock
Free Shipping Free Shipping
Quantity:   
Schwaben Professional Quality Deluxe Two Shelf Service Cart

Having convenient carts make organizing a breeze and passing that on to getting the job done well.

Features:

  • Beautiful & durable high gloss black powder coated finish
  • 350lbs load capacity supports heavy tools, parts and equipment
  • Dual handles allow Push-Pull from either side for better maneuverability
  • Rugged thru tray frame construction for stable support
  • 3" Deep trays 
  • Large, easy to maneuver 4" ball bearing casters (2 are locking)

 

Dimensions:

  • Height - 35.3"
  • Length - 30"
  • Width - 16"
  • Weight - 37.5lbs
Schwaben
Part #: 005947SCH01A
Price: $89.95 (USD) 
$117.95 (Sale - Save 24%)
In Stock
Quantity:   
Schwaben 12 Ft 6 Gauge Booster Cables Looking for a high quality set of jumper cable to keep around for emergencies? These are it, don't settle for cheap budget sets found at most places.
Schwaben
Part #: 007269SCH01
Price: $20.21 (USD) 
$26.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Shark Injector Upgrade (from One File To Another)

You may be able to upgrade the Shark Injector file to another version to better meet your tuning needs. Depending on the model we may have better tunes for things such as intakes, larger air sensors, camshafts, headers, and others. For a small fee the current Shark Injector tune can be removed and a new file added instead (the original Shark file you were using would no longer be available). To do this, we need the car restored to stock settings with the current Shark Injector and then returned to us (updating via USB is not yet available). Sharks that were not Restored to stock cannot be upgraded and the unit will be returned to you (at your expense). We also perform other work on the Shark Injector while it is here, including diagnostic tests and re-packaging with the most current instructions. The Shark that you get back is virtually new and ready to be reinstalled!

To get started, review the catalog of current Shark Injector files for one that better matches your tuning spec.
1. Enter the new tuning file in the form below. Include any other relevant information.
2. Click the Update Price or Add To Cart button.
3. Complete the online transaction with your address and payment information.
4. A Turner Motorsport sales rep will contact you after your order has been submitted. Do not send in your Shark Injector until someone has contacted you with a reference number and return shipping address.

Turn-around time for upgrades is typically the same day we receive it. UPS Ground is the normal return shipping method unless you specify faster shipping on your order. 

Helpful Links:

  • Shark Injector File List - listing of all Shark Injector files by vehicle model. Select a file from this list to upgrade to.
  • Shipping Instructions - specific instructions for packaging and shipping. Also includes a contact form to include when you send back your Shark.
  • Emissions Waiver - some tunes require this emissions/smog waiver before we can program the new file to your Shark. These are noted in the catalog listing in the links above. Print and include this Waiver when you send in your Shark.
Shark Injector
Part #: SHARK-UPGRADE
Price: $135.00 (USD) 
$150.00 (Sale - Save 10%)
Available
Free Shipping Free Shipping
Quantity:   
Turner Motorsport Custom Tough Case iPhone 4 / 4S The best iPhone case just got a bit better! We've taken the Tough Case iPhone cover and customized it with a photo of the Turner Motorsport #96 E92 M3, running hard at Barber Motorsports Park.

The Tough iPhone 4 / 4S case uses dual layers of resilient material for a rugged case that protects the object of your affection with a defensive style. The base layer is a form-fitting silicone skin that completely surrounds the iPhone 4 / 4S, adding a layer of cushion that absorbs shocks and impacts.The outer layer is an impact resistant, polycarbonate hard shell fits that fits directly on top of the silicone skin for extra iPhone protection.A solid finish makes the iPhone 4 / 4S case easy-to-hold, while the streamlined design keeps the silhouette slim enough to fit in your pocket.

Dimensions: 4.62 x 2.39 x 0.45 in (117.2 x 60.6 x 11.3 mm)
Turner Motorsport
Part #: 96-IPHONE
Price: $17.50 (USD) 
$24.95 (Sale - Save 30%)
$24.95
Limited Qty Sale
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Manual BMW Shift Knob - Chrome Sphere - 5 or 6 Speed Pattern Let this distinctive hand polished, high gloss chrome finished shift knob enhance your BMW driving experience. Available in 5-speed or 6-speed patterns.

Choose from:
5-Speed Pattern(PN: 25 16 0 411 927)
6-Speed Pattern(PN: 25 16 0 411 928)

This item fits all BMWs from 1983 to present with manual transmissions.
Genuine BMW
Part #: 2516041192X
Price: $78.77 (USD) 
$93.6 (Sale - Save 16%)
Back Ordered, Contact Us
Free Shipping Free Shipping
on orders $99 and up
Shift Boot - E46 323/325/328/330/M3 LHD - Manual - Leather or Alcantara These are the factory BMW E46 shift boots, available in either black leather or charcoal alcantara. Since these are the Original BMW parts they are a perfect fit and match to your original interior. These are complete with the lower plastic frame for a simple and quick install. This is a direct replacement for any 2-piece boot and knob. If you have a one-piece knob + boot you will need to also buy a shift knob to work with this. Fits left-hand drive models only.

E46 Shift Boot part numbers:
E46 black leather boot - 25111434426
E46 dark grey alcantara shift boot - 2517919219

This item fits the following LHD BMWs:
1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
Genuine BMW
Part #: 2511143442X
Price: $54.95 (USD) 
$66 (Sale - Save 17%)
Ships in 1 day
Free Shipping Free Shipping
on orders $99 and up
Coolant Expansion Tank - E46 (non-M), X3, X5 3.0 This coolant reservoir is for the non-M E46 3-series models from 1999-2006 (M3 takes a different expansion tank). We have found that the expansion tanks should be replaced based on age as well as condition. Expansion tanks seem to have a lifespan of less than six years before they show signs of fatigue and wear. Pre-emptively replacing the expansion tank as part of an overall maintenance plan can prevent you from getting stranded from a sudden failure later on. This is the most recent expansion tank design from Hella-Behr, the OEM supplier to BMW. It replaces the original BMW part number 17137787039.

Other items to consider replacing at the same time are the radiator cap, coolant level sensor, lower radiator hose, coolant temp sensor in the lower hose, and the hose clamps. If your car has an automatic transmission you should also replace the oil cooler thermostat in the radiator frame, which is a common source for leaks.

This coolant expansion tank fits:

1999-2006 E46 3 series - 323i, 323Ci, 325i, 325Ci, 325xi, 328i, 328Ci, 330i, 330Ci & 330xi (**no M)
2004-2008 X3 SAV - X3 2.5, X3 3.0, X3 3.0si
2000-2005 X5 SAV - X5 3.0
Packaged by Turner
Part #: 17117573781
Price: $65.98 (USD) 
$69.42 (Sale - Save 5%)
In Stock
E46 M3 Fuel Pump A fuel pump failure in the E46M3 can cause lack of power and a low-RPM stumble. Its a fairly common problem, the problem fades away as the revs build and the engine warms up. It's especially noticeable in the Winter and when the outside temperature is low. While a number of things can cause this, you should first change the fuel filter (especially if it's been over 30,000 miles. The fuel pump is another likely source of the trouble. The pump is easy to change by accessing the top of the fuel tank under the backseat. This is a new factory BMW fuel pump.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

Choose below if you would like a new fuel filter included with your pump.
Genuine BMW
Part #: 16142229684
Price: $459.83 (USD) 
$521.05 (Sale - Save 12%)
In Stock
Free Shipping Free Shipping
19mm 12x1.5 Turner Yellow Zinc-Coated Race Wheel Nut Turner Motorsport’s five years of endurance competition has taught us many things. One was that not all lug-nuts are made the same. While the standard nuts that we sell are great for daily drivers, HPDE events, and club racing, a beefier and more durable nut was needed for the 3-hour, 6-hour, and 24-hour professional endurance races. During the 24 Hours of Daytona, our crew guys made over 80 tire changes in NASCAR-style pitstops. That kind of abuse from air guns and fast work required the "next level" of lug-nut. These nuts are a high-grade steel with a zinc coating and they incorporate several innovative features.

The wheel-side of the nut has recessed threads so that the nut has to be square to engage the threads. Without the recess, it’s far too easy to start the threads with the nut being crooked.

The 19mm head of the nut is slightly rounded to help the socket find its position.

The zinc plating that we use is reasonably durable without being excessive. With too much coating, the chipped and worn coating fragments can end up in the threads, leading to all sorts of trouble. Anyone who has used nuts repeatedly knows that the coating is not going to last forever. The constant abuse from air guns will chip it all away. So why add weight and the potential for disaster with excess coating? We did away with most of the danger from that with a lighter coating that still resists the tough environment of the track.

Features:
  • Developed for our Grand-Am / Continental race team
  • High grade steel to withstand the extreme abuse of air guns and race conditions
  • Bright yellow zinc plating to help tire changer zoom in on their target quickly and accurately
  • Minimal plating won’t result in excess coating wearing off and “gumming up” the threads
  • 19mm hex to prevent rounding off
  • Rounded top for fast socket engagement
  • Recessed threads to aid in fast nut-to-stud alignment without cross threading
  • We recommend using with Turner Motorsport bullet nose dry-lube wheel studs
    Price is per nut.
  • Turner Motorsport
    Part #: TWH9952R19
    Price: $3.71 (USD) 
    $4.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Valve Cover Gasket Set - E46 E39 X5 Z3 with M52TU, M54 1999-2002 Original BMW replacement valve cover gaskets, including large cover gasket and spark plug cavity gaskets. Fits all M52TU engines and M54 engines up to 2002 model year (not M56 SULEV engine). This is the OE BMW gasket rather than an OEM or aftermarket brand - we have found the OE gaskets are a better seal than the others.

    This item fits the following BMWs:
    1999-2002 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
    1999-2002 E39 BMW 525i 528i 530i
    2000-2002 E53 BMW X5 3.0i
    1999-2002 Z3 BMW Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
    Genuine BMW
    Part #: 11129070990
    Price: $66.45 (USD) 
    $81.12 (Sale - Save 24%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Upper Spring Perch Adapters (Pair) - For Stock E46 M3 Springs with Turner Race Camber Plates These are upper spring plate adapters that we make for one purpose: fitting a stock-style E46 M3 spring with our Race Camber Plates. Normally we use our Street Camber Plates in that application. But we have sold a lot of camber plates over the years and someone inevitably ends up with a Race Camber Plate for their stock/H&R/Eibach springs. Our Race Camber Plates were originally designed for a smaller racing coil over spring (60mm, 2.25", 2.5") so a larger stock spring will not work. We engineered this adapter to fit inside the stock E46 M3 upper spring plate. The stock upper spring plate is actually a nice design and it has a built-in radial bearing to allow the spring to rotate around the strut. This also allows you more options when buying a camber plate - you won't have to buy new camber plates if you remove your coil overs and put the stock suspension back on.

    These spring plate adapters are sold as a pair. The factory M3 upper spring plate is not included (sold separately). Add one to your order from the 'Additional Items' menu below.

    These are made for a 16mm strut pin shaft and either a tapered or square strut pin base. Choose your setup in the options below.

    This item fits the following BMWs:
    2001-2006 E46 BMW M3
    Turner Motorsport
    Part #: TSU4680SPx
    Price: $67.96 (USD) 
    $79.95 (Sale - Save 15%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Valve Cover Gasket Kit Original BMW replacement valve cover gaskets, including large cover gasket and spark plug cavity gaskets. Fits M54 engines used from model year 2003 and up. This is the OE BMW gasket rather than an OEM or aftermarket brand - we have found the OE gaskets are a better seal than the others. 

    This item fits the following BMWs:
    2003-2006  E46 BMW  325i 325ci 325xi 330i 330ci 330xi
    2003  E39 BMW  525i 530i
    2004-2005  E60 BMW  525i 530i 
    2004-2006  E83 BMW  X3 2.5i X3 3.0i 
    2003-2006  E53 BMW  X5 3.0i 
    2003-2005  Z4 BMW  Z4 2.5i Z4 3.0i
    Genuine BMW
    Part #: 11120030496P
    Price: $45.11 (USD) 
    $60.27 (Sale - Save 25%)
    Ships in 1 day
    Free Shipping Free Shipping
    on orders $99 and up
    Wheel Bolt for BMW, MINI - 12x1.50 - Black Chrome - fits most BMWs (see list) These 'show quality' black chrome wheel bolts have a satin/luster finish to them that looks better than most other finished bolts, including the factory bolts. The bolt head is also finished off better with a rounded head instead of recessed. If your wheels are perfect, your bolts should be too! These are high grade (10.9) 12x1.50 bolts, in the same size as the stock bolt or to be used with a small 5-8mm spacer.

    Price is per bolt (each). You can enter your quantity after pressing the Update Price button below or from the shopping cart.






    + Emblem Application Specifics
    (click here to check your car)
    These black satin wheel bolts fit the following BMWs:
    2008-2012 E82 BMW 128i 135i 1M Coupe
    1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2013 E93 BMW 328i 335i M3 - Convertible
    1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
    1989-1995 E34 BMW 525i 530i 535i 540i M5
    1997-2003 E39 BMW 525i 528i 530i 540i M5
    2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
    1982-1989 E24 BMW 633csi 635csi M6
    2004-2011 E63 BMW 645ci 650i M6
    1988-1994 E32 BMW 735i 735il 740i 740il 750il
    1995-2001 E38 BMW 740i 740il 750il
    1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    2000-2003 E52 BMW Z8 Roadster
    2002-6/2006 R50 MINI MINI Cooper
    2005-6/2006 R52 MINI MINI Cooper Convertible, MINI Cooper S Convertible.
    2002-6/2006 R53 MINI MINI Cooper S
    Turner Motorsport
    Part #: TMS16545
    Price: $3.26 (USD) 
    $6.25 (Sale - Save 48%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Turner Motorsport Blipshift Z4 Racecar T-Shirt - Black Your 328i may not yet be a full blown GT racecar, but adding that short shift kit gets you one step closer. Monday morning's 5 minute long red light is a chance to daydream of the 180mph high banks of Daytona! Every mod is a life enhancement with daily rewards.

    Introducing the winner of the Racing Bimmers Tee Design Contest by Blipshift honoring Turner Motorsport's continued success with BMW racecars! From e30s to last season's monster Z4, Turner has stayed true to BMWs since 1993, amassing 7 championships.

    Congrats to Anthony, winner of the Pit Crew Experience with the Turner team this season at Mazda Raceway Laguna Seca!

    Only available at TurnerMotorsport.com. Choose from Fitted T-shirt or Beefy T
    Turner Motorsport
    Part #: BS-Z4-FITTED
    Price: $12.00 (USD) 
    $19.95 (Sale - Save 40%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Spec Clutches
    Part #: SB034
    Price: $1850.98 (USD) 
    $1979.29 (Sale - Save 6%)
    Direct Ship
    Genuine BMW Mens Button Down Shirt - White This shirt sports the BMW M logo convinces even outside circuits. The BMW M stripes adorn the interior of the neck and wrists and an ///M logo on the left chest. The buttons and inside collar are anthracite colored. Material: 96% cotton, 4% elastane.
    Genuine BMW
    Part #: TMS338509
    Price: $61.51 (USD) 
    $74 (Sale - Save 17%)
    Ships in 4 days
    Free Shipping Free Shipping
    on orders $99 and up
    Genuine BMW Motorsport Fan Polo Shirt This classic polo comes with glossy stripes in the BMW Motorsport colors on the back. The ribbed collar, neck tape, side slits and inner placket all feature a motorsport stripe design. BMW logo on the left sleeve. Material: 95% cotton, 5% elastane, piqué, antibacterial. Imported.
    Genuine BMW
    Part #: TMS338519
    Price: $32.37 (USD) 
    $38 (Sale - Save 15%)
    Ships in 4 days
    Free Shipping Free Shipping
    on orders $99 and up
    E46 330i/xi Shark Injector Performance Software
    • Unlock torque and horsepower
    • Smoother engine with less hesitation
    • Improved throttle response
    • Rev limit increased to 7000
    • Top speed limiter removed
    • Installs in minutes!

    Performance software is a   must-have  upgrade on your BMW and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!

    The M54 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel while maintaining BMW reliability and smoothness. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. A lot of tuning has been done at the low RPM ranges to improve response. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. We also raise the rev limit to 7,000 and remove the top speed limiter. By fine tuning these maps we've been able to improve the M54/M56 engine beyond what BMW did by making more power and torque and a smoother-running engine.

    The Shark Injector plugs into the diagnostic port inside the E46 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.

    2001-2005 E46 330i (M54 engine) Performance Software Peak Gains

    E46 330i dyno chart
    HP Gain+ 4 @ 6100 RPM
    Torque Gain+ 7 @ 3400 RPM
    New Rev Limit7000 RPM


    2004-2006 E46 330i ZHP (M54 engine) Performance Software Peak Gains

    330i ZHP dyno chart
    HP Gain+ 14 @ 6400 RPM
    Torque Gain+ 11 @ 4100 RPM
    New Rev Limit7000* RPM

    E46 330i ZHP Rev Limits
    (click to expand)
    There are multiple versions of stock ZHP software and BMW used different rev limits in some of them. A ZHP automatic will always have a lower rev limit than a manual in the interest of preserving the automatic transmission. Our engine software will alter the rev limit set in the ECU but other limits in the auto transmission programming will maintain the factory rev limit. Manual ZHPs have stock rev limits that vary - some are set as high as 6920 by the factory software. The Shark ZHP software sets all manual tranmission rev limits to 6920.
    Read what others are saying!
    (click to expand)
    greekpsycho, 325i: "I sharked my 325 a few months ago and I noticed a huge difference. This REALLY brought out the best of my car."
    TJ710, 325i: "just did this to my own stock 325i about 3 weeks ago and I definitely felt a difference and it put a smile on my face."
    Dahmwern, 325Ci: "I'm definitely noticing a sweetly smooth power delivery, as well as a noticeable power increase in the low end as you being to accelerate (especially up moderate inclines). Note: This is NOT placebo effect. I drove the same route before and after to compare, and while its not perfectly scientific, it was quite obvious that there were some changes that took place - changes for the better. Like many mods, the car should have come this way!"

    Rob43, 330i: "besides the 7000rpm, removal of the top speed limiter, and very good(improved) throttle response, I got 6.5WHP on the dyno with my Shark injector. That’s worth $300 bucks in my book."
    xixixi, 330xi: "I got the shark for my 330xi, I love it. Shark > all. Why? It gives gains that other "custom tunes," can't. What I liked the most about my shark is shift points. If you can shift decent, you can stay in the 5.5k+ range."
    Douglas, 330Ci: "Just last week I had your Shark Injector installed in my 2001 330Ci. What a difference it makes! I already loved the car and it’s a great car to drive, but this takes it to a new level."
    Steve 330i: "I bought the software and CAI by Jim C. Installed both at the same time and have put around 500 miles on over the last month. The car is amazing to drive, and the software seemed to make the power band a bit flatter, less of a dip and a bit better at the lower RPMS."

    nleksan, 330i ZHP: "Ditch the Brand XXXXX software and switch it up for the newly-released Conforti Shark Injector for your car. It will give you a higher redline, no top-speed, more power, and much better throttle response, even over the Brand XXXXX."
    3579az, 330i ZHP: " The throttle response problem has been solved. I can now perform perfect rev-matches with ease, unlike before. I've been heel-and-toe downshifting all day with a major success rate of perfect shifts, which is a LOT more than could be said compared to stock. I can now pull cleanly through the rev range without feeling any hesitation or dead spots. I have confirmed that the dead spot that was painfully obvious before the flashing… is gone."
    pyreguy, 330i ZHP: "I have been VERY pleased with mine. The dead spot being irradiated was the best thing EVER."
    Scott, 330i ZHP: "Very increased acceleration - especially from around 3,000 to 6,000. The car feels like a bullet! It is the same smooth kind of power too - just more of it, delivered continuously to the top rpm. So 3rd feels more like 2nd gear now! Throttle transitions are much more refined. So when in low gears, on and off throttle changes are very seamless and smooth (no jerking) - and the change has made shifting gears easier - especially first to second. So now my car is much more fun to drive and shows engine performance that is better matched to the incredible handling ability it has. I'm very pleased with this upgrade and can't thank you enough!!!
    Shark Injector Installation Instructions
    (click to expand)
    Shark Injector installation instructions
    A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
    The minimum octane fuel for this software is 91.
    Shark Injector FAQ
    (click to expand)

    This item fits the following BMWs:
    2001-2006   E46 BMW  330i 330ci 330xi
    Shark Injector
    Part #: TMS269
    Price: $314.10 (USD) 
    $349 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    Turner Motorsport Ladies' Tank Top Show your support for Turner Motorsport and your favorite BMW race team and parts supplier with these stylish blue cotton Turner Motorsport tank tops. The tanks feature a yellow logo. Available in three sizes.
    Turner Motorsport
    Part #: TMSTANK
    Price: $11.60 (USD) 
    $19.95 (Sale - Save 42%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Liqui Moly Race Tech GT1 10w-60 Oil Service Kit - E46 M3 Z3/Z4 M Coupe/Roadster (S54)

    Liqui Moly Oil Service Kits from Turner Motorsport include everything you need to change the oil in your BMW. 

    Includes:

    • 6 Liters of Synthoil Race Tech GT1 10w-60
    • Mann Oil Filter
    • Oil Drain Plug & Washer

    Liqui Moly GmbH develops and tests all engine oils, additives, and car care products in-house, ensuring all Liqui Moly products extend the life of your engine via optimal lubrication. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world. Turner Motorsport trusts Liqui Moly to keep all of our race cars - including the M6 - running smooth from the first hotlap to the last.

    Turner Motorsport recommends Synthoil Race Tech GT1 10w-60 for your S54 engine. Race Tech is a modern high performance engine oil formulated for engines that experience extreme load pressures. Fully synthetic, the oil combines base oils and additives to provide exceptional lubrication and engine wear protection. This oil provides immediate lubrication upon cold start, offering significantly improved protection compared to other oils. Liqui Moly Race Tech GT1 10w-60 will keep your S54 pulling hard and running smooth on your commute home from work, your touge run through the valley, and while you are trying to get your best times on the track.

    Packaged by Turner
    Part #: LM0CK3KT
    Price: $59.74 (USD) 
    $66.38 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Genuine BMW Oil Drain Plug with Washer - S54 S65 S85

    This genuine BMW replacement oil drain plug with washer is perfect to replace your old beat up or stripped oil plug for easy removal and oil changes.

     

    Fits the following BMW engines:
    S54, S65, S85

    Genuine BMW
    Part #: 07119904550
    Price: $3.51 (USD) 
    $3.90 (Sale - Save 10%)
    In Stock
    Quantity:   
    Liqui Moly Ceratec Oil Additive

    Using a combination of ceramic compounds, this oil additive reduces friction and wear by forming a protective film that cuts down on direct metal to metal contact. This both extends the engines service life and reduces fuel consumption in both gasoline and diesel engines. Specially formulated to adhere to the internal engine's metal surfaces, which makes this great for vehicles with high pressure, cam-driven fuel pumps and engines that make excessive noise on start up.

    This even works with standard, non-limited slip differentials, transmissions, pumps, and compressors. This is not suitable for wet-clutch applications.

    This bottle will treat up to 5 liters and has a long-term effect of 30,000 miles.

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Liqui-Moly
    Part #: 3721
    Price: $18.80 (USD) 
    $20.89 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Liqui-Moly Race Tech GT1 10w-60 Engine Oil - 5 Liters

    Synthoil Race Tech GT1 is a modern hig performance engine oil formulated for engines that are experience extreme load pressures. Fully synthetic, the oil combines base oils and additives to provide exception lubrication and engine wear protection. This design and composition makes it a great choice to used for racing and other demanding needs. Great for both gasoline and diesel engines.

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Liqui-Moly
    Part #: LM2024
    Price: $39.55 (USD) 
    $43.95 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Molygen New Generation Engine Oil (5w-40) - 5 Liter

    New generation engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo and multi-valve compatibility, and long service life.

    Properties:

    • Smooth engine running characteristics
    • Long engine service life due to exceptional protection against wear
    • Rapid oil delivery at low temperatures
    • Optimum oil pressure at all engine speeds
    • Premium lubrication reliability at high and low temperatures
    • High shear and ageing stability
    • Reduces fuel consumption and pollutant emissions
    • Outstanding engine cleanliness
    • Tested with catalytic converters and performance proven with turbochargers
    • Miscible and compatible with commercially-available engine oils

    Approved for the following specifications:

    • ACEA C3
    • API SN / CF
    • VAG 502.00 / 505.00
    • BMW Longlife-01

     

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Liqui-Moly
    Part #: 20232
    Price: $33.10 (USD) 
    $38.95 (Sale - Save 15%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    5MM Silicone Vacuum Hose - Red - 9 Feet Car suffering from vacuum leaks? This vacuum hose has a 5mm inner diameter. 
    Forge
    Part #: vc05r
    Price: $12.56 (USD) 
    $13.95 (Sale - Save 10%)
    In Stock
    Quantity:   
    VANOS Solenoid Valve - E46 M3, Z3M(S54), Z4M This is the solenoid switch that activates the VAN0S system on the E46 M3 and Z3/Z4 M S54 engine. Without this switch activating (and de-activating) the VAN0S you will experience poor performance and torque output, worse fuel economy, fault codes for VAN0S operation and misfires. Thankfully, this part is relatively easy to replace and they generally last a long time. This is the Genuine BMW solenoid, not an overseas knockoff, so the quality is first-rate. This is the solenoid used on S54 engines.

    If you are looking to install the VAN0S solenoid, you should also order the o-ring from the options below. Also check for leaks from the VAN0S oil line and seals. Now is a good time to access and replace it if it's leaking.

    This solenoid valve fits the following BMWs:
    2001-2006 E46 BMW M3
    2001-2002 Z3 BMW M Roadster M Coupe - S54 engine
    2006-2008 Z4 BMW M Roadster M Coupe
    Genuine BMW
    Part #: 11367839180
    Price: $819.95 (USD) 
    $942.27 (Sale - Save 13%)
    In Stock
    Free Shipping Free Shipping
    E46 M3 Shark Injector Performance Software Programmer With Sport Mode Memory

    Shark Injector Performance software includes:

    • Saves your last Sport Mode setting
    • Horsepower and torque gains
    • Faster and smoother throttle response
    • Top speed limiter removed
    • Extremely easy to install/uninstall
    • Reversible and reusable

    Performance software is a must-have upgrade on your E46 M3 and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!

    The M3 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel and revising the torque limiters in the ECU. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. Choose between a stock or raised rev limit. The top speed limiter is removed. By fine tuning these maps we've been able to improve the S54 engine beyond what BMW did by making more power and torque and a smoother-running engine.

    The Shark Injector plugs into the diagnostic port inside the E46 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.


    E46 M3 Dyno
    Power and Torque Gains
    Stock: 278.2 whp / 235.3 wtrq
    Sharked: 284.2 whp / 236.9 wtrq
    Peak Gain 6.0 rear wheel HP and 1.6 rear wheel Torque
    (note: the max gain (biggest improvement) is 9 rear wheel HP between 7000 and 8000 rpm)

    The Sport Mode Memory option will remember if you left the car in Sport Mode or not. When you restart the car it will be in the last setting you used. This is perfect for owners who use Sport Mode all the time. You won't have to remember to press the button each time you start the car. The Sport Mode button functions the same as before so you can turn Sport on/off at any time. The software will remember which one you left it in.

    Looking to maximize your power gains? Add a Turner IAT Relocation to combat power-robbing heat soak - the only true plug-and-play solution available. Heat soak is a real plague on consistent power for a stock or tuned vehicle. Click here to read more about our IAT relocation kit.

    Shark Injector Installation Instructions
    (click to expand)
    Shark Injector FAQ
    (click to expand)

    This item fits the following BMWs:
    2001-2006 E46 BMW M3 (US models only)
    Shark Injector
    Part #: TMS5463
    Price: $314.10 (USD) 
    $349 (Sale - Save 10%)
    Ships in 2 Days
    Free Shipping Free Shipping
    BMW Motorsport DTM Team Polo Shirt - Men's Sporty polo is detailed with BMW logo and PUMA® logo at chest, white and red stripes along the sides and BMW M stripes and sponsor logos on the sleeves. “Powered by BMW M” wordmark and BMW M logo at back hem and BMW Motorsport wordmark between the shoulders.100% cotton. European fit. Imported
    Genuine BMW
    Part #: TMS338518
    Price: $57.93 (USD) 
    $68 (Sale - Save 15%)
    Ships in 4 days
    Free Shipping Free Shipping
    on orders $99 and up
    E46 M3, MZ3 Shark Injector Race Software (for Headers and Cat Delete)

    Shark Injector Performance software includes:

    • Tuned for headers and no cats
    • Horsepower and torque gains
    • Faster and smoother throttle response
    • Top speed limiter removed
    • Extremely easy to install/uninstall
    • Reversible and reusable

    Performance software is a must-have upgrade on your E46 M3 and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!

    The M3 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel and revising the torque limiters in the ECU. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. The rev limit is raised to 8,100 RPM rev limit and the top speed limiter is removed. By fine tuning these maps we've been able to improve the S54 engine beyond what BMW did by making more power and torque and a smoother-running engine.

    The Shark Injector plugs into the diagnostic port inside the E46 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.


    E46 M3 Dyno
    Power and Torque Gains (stock header config)
    Stock: 278.2 whp / 235.3 wtrq
    Sharked: 284.2 whp / 236.9 wtrq
    Peak Gain 6.0 rear wheel HP and 1.6 rear wheel Torque
    (note: the max gain (biggest improvement) is 9 rear wheel HP between 7000 and 8000 rpm)

    The software for running without cats includes special programming tweaks that will ignore certain readings from the post-cat O2 sensors and rely on the data from the first set of O2 sensors and the EGT sensor. The post-cat O2 sensors must still remain in place in the exhaust.

    Looking to maximize your power gains? Add a Turner IAT Relocation to combat power-robbing heat soak - the only true plug-and-play solution available. Heat soak is a real plague on consistent power for a stock or tuned vehicle.Click here to read more about our IAT relocation kit.

    Shark Injector Installation Instructions
    (click to expand)
    Shark Injector FAQ
    (click to expand)

    This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and either e-mailed or faxed to Turner Motorsport before shipping. You can download the waiver here.

    This item fits the following BMWs:
    2001-2006 E46 BMW M3 (US models only)
    2001-2002 Z3 BMW Z3 M Roadster M Coupe
    Shark Injector
    Part #: TMS158
    Price: $314.10 (USD) 
    $349 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    OEM Style Hose Clamps Hose clamps for radiator hoses, coolant hoses, vacuum hoses, or intake hoses. These hose clamps are the same style as your OEM hoses with a smooth inside band to prevent cutting into the hose material.

    Features:
  • 9mm band width
  • 6mm hex & slotted head
  • Smooth inside of band = optimal hose protection
  • OEM
  • 430 Stainless steel band and housing with zinc plated steel screw
  • Asymmetric housing = even distribution of forces and prevents tilting of the clamp when tightening
  • Screw support = ease of assembly due to the safe guidance of the emerging band
  • Short housing saddle = even contact pressure = improved efficiency

    Part NumberDescriptionClamping Range in MMClamping Range in Inches
    008-12T8-12 HOSE CLAMP8mm-12mm5/16"-1/2"
    008-16T8-16 HOSE CLAMP8mm-16mm5/16"-5/8"
    012-20T12-20 HOSE CLAMP12mm-20mm1/2"-3/4"
    016-27T16-27 HOSE CLAMP16mm-27mm5/8"-11/16"
    020-32T20-32 HOSE CLAMP20mm-32mm3/4"-1 1/4"
    025-40T25-40 HOSE CLAMP25mm-40mm1"-1 5/8"
    030-45T30-45 HOSE CLAMP30mm-45mm1 3/16"-1 3/4"
    032-50T32-50 HOSE CLAMP32mm-50mm1 3/8"-2"
    040-60T40-60 HOSE CLAMP40mm-60mm1 5/8"-2 3/8"
    050-70T50-70 HOSE CLAMP50mm-70mm2"-2 3/4"
    060-80T60-80 HOSE CLAMP60mm-80mm2 3/8"-3 1/8"
    070-90T70-90 HOSE CLAMP70mm-90mm2 3/4"-3 1/2"
    080-100T80-100 HOSE CLAMP80mm-100mm3 1/8"-4"
    090-110T90-110 HOSE CLAMP90mm-110mm3 1/2"-4 3/8"
    110-130T110-130 HOSE CLAMP110mm-130mm4 3/8"-5 1/8"
  • Turner Motorsport
    Part #: Hose-Clamps
    Price: $0.57 (USD) 
    $2.19 (Sale - Save 74%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Genuine BMW E46 3 Series Floor Mat Set E46 3 Series 4 pc. Floor Mat Set with "BMW" logo, these fit all E46 3 series from 1999 to 2005. These DO NOT fit the AWD XI, convertibles, or right hand drive models (these are for left hand drive models only). These are genuine BMW factory floor mats, just like the dealer offers -- only less expensive! Please choose your color below to match your interior. Mats include velcro fasteners.

    These BMW floor mats fit the following cars:
    1999-2000 E46 323i, 323Ci, 328i & 328Ci
    2001-2005 E46 325i, 325Ci, 330i & 330Ci
    2006-2006 E46 325Ci & 330Ci
    2001-2006 E46 M3 coupe (no convertible)
    Part #: 8211147042X
    Price: $112.98 (USD) 
    $130 (Sale - Save 13%)
    In Stock
    Turner Motorsport Double Win T-shirt 2013 These 100% cotton t shirts feature the #94 and #96 Turner Motorsport BMW M3s as raced in the Grand Am Series on the back with the Turner Motorsport Logo on the front. Available in sizes Small-XXL.
    Turner Motorsport
    Part #: TMS338546
    Price: $14.99 (USD) 
    $ (Sale - Save 0%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Genuine BMW E46 M3 Logo Floor Mats E46 M3 4 pc. Floor Mat Set, these fit all E46 3 series from 1999 to 2005. These do not fit the convertible models. These are genuine factory mats with the "M3" logo embroidered in. Please choose your color below to match your interior. Mats include velcro fasteners. These mats do not fit xi models, convertibles, or right hand drive models (left hand drive only).

    These BMW floor mats fit the following cars:
    1999-2000 E46 323i, 323Ci, 328i & 328Ci
    2001-2005 E46 325i, 325Ci, 330i & 330Ci
    2006-2006 E46 325Ci & 330Ci
    2001-2006 E46 M3 coupe (no convertible)
    Genuine BMW
    Part #: 8211002923X
    Price: $112.98 (USD) 
    $130 (Sale - Save 13%)
    In Stock
    Free Shipping Free Shipping
    Upper Spring Hats/Perches (Pair) - 2.25 Inch / 16mm Pin / Square Seat Made in the USA These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

    Spring I.D.Strut Pin Diam.Strut Pin Seat
    2.25"16mmsquare

    Turner Motorsport
    Part #: TSU998062A
    Price: $67.96 (USD) 
    $79.95 (Sale - Save 15%)
    Ships on Sep 21, 2018
    Free Shipping Free Shipping
    on orders $99 and up
    E46 Coupe M-Technic Rear Lip Spoiler This is a factory rear lip spoiler for all BMW E46 2-door 3 series - including the Convertible. A sublte sporting addition to your car's character. It attaches to the trunk with an adhesive backing so no drilling is required. Comes unpainted. We offer the adhesive in a pull down below.

    Also fits BMW E36/2 coupes and convertibles. Same installation as E46 with no modification necessary.Choose from the Genuine BMW M-Technic rear lip spoiler or the aftermarket replica lip spoiler below.

    This item fits the following BMWs:
    1992-1998 E36 3 Series BMW 318is 318ic 323is 325is 328is 328ic M3
    1999-2006 E46 3 Series BMW 323ci 325ci 328ci 330ci M3
    Part #: 51717893671XX
    Price: $105.52 (USD) 
    $122 (Sale - Save 14%)
    Ships in 5 days
    Free Shipping Free Shipping
    Seasonal Tire Tote (Set of 4) Tire carrying and storage system that alleviates the mess and strain of seasonal tire change. 

    Benefits:  
     + Protects clothing from tire and brake residue
     + Easier to carry tire
     + Protects vehicle interior from tire & brake residue
     + Organizes garage
     + One size fits all
     + Extends the life of the tire
     + Machine Washable
    + Rugged long lasting construction

    Kit Includes : - Four Tire Bags, fit most passenger vehicles. (22" through 31" tire)
    Tire Tote
    Part #: 36
    Price: $37.48 (USD) 
    $49.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Replica E46 M3 This is a high quality reproduction of the Euro-only model E46 M3 CSL style front bumper cover spoiler. Unlike the stock E46 M3 style bumper, this CSL style has no fog light openings, and a single duct on the driver's side that can be made to function as a cold air intake inlet/duct. The bumper is made of polypropylene (PP) plastic, just like a factory BMW bumper covers. It also features pre-installed carbon fiber lips, very much in keeping with the factory CSL part. Best of all, this CSL-inspired bumper is available for only a fraction of what a real CSL bumper would sell for -- the BMW dealers themselves are forbidden from ordering genuine CSL parts anymore, making the "real thing" even harder to come by. This bumper comes as shown, primed ready to prep and paint. Includes US license plate mount (bumper is pre-drilled to accpet the license plate mount). The screen for the intake hole is not included but can be added from the options below. Professional paint and installation is highly recommended.

    This M3 CSL style bumper can be used on the following BMWs:
    1999-2005 E46 3 Series Sedan BMW 323i, 325i, 325xi, 328i, 330i, 330xi
    2000-2006 E46 3 Series Coupe BMW 323Ci, 325Ci, 328Ci & 330Ci
     
    Turner Motorsport
    Part #: TMS1905
    Price: $314.98 (USD) 
    $384.95 (Sale - Save 18%)
    Direct Ship
    Mega-Stuffed Backpack Gift Package Our favorite 2016 BMW gift ideas, conveniently bundled in our new backpack. Can't decide which Turner Motorsport works best? Get them all and save $137! This makes a great package for one or more Bimmer fans in your family.

    Our "Mega Stuffed Backpack" package includes:
    + $200 Turner Gift Certificate
    + Turner OGIO backpack
    + Turner Pint Glass
    + Turner Keychain
    + Turner Flexfit Baseball Cap
    + Turner Knit Cap
    + Turner 1/4 Zip Pullover
    + "Adrenalin" BMW Motorsport DVD
    + Minichamps Turner Z4 1/43 model
    + Turner Motorsport Sticker Sheet

    Choose a hat option and pullover size from the options below.
    Packaged by Turner
    Part #: GP155
    Price: $356.90 (USD) 
    $360.01 (Sale - Save 1%)
    Ships on Aug 22, 2018
    BMW Trunk Emblem - E46 Wagon Is your BMW's roundel emblem faded, chipped, peeling or even MISSING? A new rear hatch badge is an easy and inexpensive way to treat your BMW and spruce up its looks. Best of all, it takes only minutes to change! Mounting grommets sold separately.

    This item fits the following BMWs:
    1999-2005 E46 BMW 323i Wagon 325i Wagon 325xi Wagon
    Genuine BMW
    Part #: 51148240128
    Price: $34.89 (USD) 
    $39.21 (Sale - Save 11%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Genuine BMW M Fan T-Shirt Classic black tee with large M logo.100% cotton double finish. European fit.
    Genuine BMW
    Part #: 8014215807X
    Price: $25.56 (USD) 
    $30 (Sale - Save 15%)
    Ships in 4 days
    Free Shipping Free Shipping
    on orders $99 and up
    Turner Motorsport Street Front Adjustable Camber/Caster Plates - E46 M3

    These camber plates are perfect for the enthusiast owner who wants a high quality design with a motorsports background. Knowing a full race kit on the street is not often the best option, we took the best features from the Race Camber Plates and incorporated them into a fresh Street design -

    • preserves the correct E46 M3 geometry
    • separate sliding camber and caster adjustments
    • maximum shock travel
    • light weight
    • durable materials
    • large surface area
    • ease of use

    The Turner E46 M3 Street Camber Plates are the most advanced design on the market. These are designed specifically for the E46 M3 - no shortcuts or cookie-cutter components. We started with a fresh design to make these very user friendly and easy to install and set up. The E46 M3 front suspension has unique geometry and the strut is mounted at an angle that can put significant side loading on the strut shaft if it's not located properly. The location and angles for the main bearing were carefully engineered to allow the proper motion ratio and strut angles during adjustment. This greatly reduces bending forces on the strut itself which improves performance and longevity. By designing for one chassis we're able to focus on what works best in that application - proper fitment and operation without unnecessary adapters, easy-to-use camber and caster adjustments, and an intelligent modular design.

    For street use we added a pliable urethane bushing to absorb vibration and a special base design that works with the factory radial bearing and spring perch. The radial bearing allows the spring to rotate instead of twisting and binding. By re-using the factory radial bearing we can keep the assembled stack height lower for maximized shock travel. It's also a commonly-available item that you can get from any BMW dealer at a low price. All of the things that make it work well in the factory application carry over to our design. You can use our camber plates with a stock sized spring, 60mm, or 2.5" springs. Use your stock spring perch/bearing with stock-sized springs. The 60mm and 2.5" upper spring perches are sold separately. The beauty of our design is that you can use the factory radial bearing with any of these springs.

    Another important feature of the Turner Camber Plates is the size of the upper plate. Our plates have a very large surface area to better spread strut forces through the strut tower. A smaller upper plate, like those found on competitor's kits, will localize strut forces and contribute to strut tower deformation ('strut tower mushrooming'). This is a very important feature especially as these cars get older and spend more time on the track. Deformed strut towers are a serious performance and safety concern and our camber plates are properly designed to handle the loads. The factory strut reinforcement plates are not required with our camber plates (but you can use them if you want to).

    Since this design is specific to the E46 M3, we can build it with the bare minimum of adapters and extra hardware. This not only cuts down on confusion but makes it easier to assemble and operate. We use the correct-sized bearing for the 16mm strut shaft; no sleeves or bearing adapters required. The original tapered lower mount support and a small stainless steel spacer from our kit are all that's required to install. We have used our camber plates with most of the major strut manufacturers on the market - stock Sachs/Boge, Bilstein, Koni, H&R, ST, and KW. Our camber plates work with any strut that is designed to accept the factory strut mount.

    Click here for installation instructions.

    This item fits the following BMWs:
    2001-2006 E46 BMW M3

    Turner Motorsport
    Part #: TSU4680501
    Price: $404.96 (USD) 
    $449.95 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    Genuine BMW White T-Shirt with Large Roundel Logo This Genuine BMW T shirt features a generous classic fit and retains its shape for long-lasting wear thanks to it's Cotton/Lycra® fabric blend. Authentic BMW Roundel on a white tshirt and "The Ultimate Driving Machine" text. This is the perfect T-shirt for any BMW owner, or aspiring BMW owner and makes an excellent gift. Choose your size below
    Genuine BMW
    Part #: 8222146928x
    Price: $13.22 (USD) 
    $15 (Sale - Save 12%)
    Back Ordered, Contact Us
    Free Shipping Free Shipping
    on orders $99 and up
    E46 325/330 Turner/Corsa TSE3 Axle-Back Sport Mufflers Made in the USA
    • Aggressive, Throaty Sound
    • No Highway Drone!
    • Rear Muffler Section - a bargain compared to a full system
    • Made in the USA
    • Lifetime Warranty

    Corsa's TwinSilencer Exhaust will change the sound of the E46 325/330 from a mild mannered commuter car to a true sports car. Corsa has designed a E46 performance exhaust with a tuned aggressive sound that is worlds apart from the stock ho-hum exhaust. But thanks to their innovative RSC technology this exhaust stays civilized at normal speeds and RPM. This is a sport exhaust that you can live with on a daily basis but it opens up when you get on it. This Corsa kit is known as the "Light" version and includes the rear muffler only, after the rear axle. It has the same mufflers as the full cat-back TSE3 exhaust but replaces only the rear muffer. This gives you nearly all of the sweet Corsa sound but a more accessible price point. Tips are available as polished or black and laser engraved with the Corsa logo. The black tips have an innovative coating that won't chip or flake and provides outstanding corrosion resistance.

    Although known as the Twin Silencer Exhaust (TSE3) this system almost has dual personalities. When driven aggressively it produces a throaty and charismatic exhaust note. It has plenty of burbles and pops that a performance exhaust should have and compliments other performance upgrades you may have on your car. But when driven lightly there's only a slight hint of sporty sound. It becomes a subdued version of its other self and completely livable on daily and highway trips with NO DRONE! You can use it on a daily driver without it being annoying or intrusive and then let it off its leash for the weekend fun runs.

    Reflective Sound-Cancellation (RSC) technology - This feature is a patented non-electrical noise control system, where engine sound (pressure) waves are reflected in passages inside the muffler 180 degrees out of phase to cancel out unwanted sound waves. The result is a tuned muffler that "cleans up" the noise without eliminating the pure sound of power associated with a high-performance vehicle. Using the Corsa technology, the stainless steel mufflers are tuned to eliminate passenger cabin resonance and produce just the "right" sound. The result is quieter cruising with an awe-inspiring roar at full throttle. This system is amazingly quiet during normal cruising, due to the "no drone" RSC technology, yet still has an aggressive presence and full sound while under throttle. This makes for ideal sound for those that want an aggressive "roar" while driving hard, yet still want a more discrete lower volume for normal cruising.

    This is an axle-back system, which replaces only the rear mufflers of the stock 325/330 exhaust. It's very easy and straightforward to install and the rest of the exhaust can remain on the car (the original muffler is cut from the exhaust). Detailed photographic instructions are included. This system is 100% Made in the USA and carries a lifetime warranty from the manufacturer. This exhaust is emissions legal in all 50 states (no effect whatsoever on emissions, and no "Check Engine" warning lights).

    Sound Clips:

    325Ci with TSE "light"
    revving and exterior driving

    330i with TSE "light"
    stock vs. Corsa, revving

    330ci with TSE "light"
    revving and drive-by


    Exhaust Specs:
    section:rear muffler
    connects to:stock exhaust section up to the rear axle
    tip style:3" dual round; stainless or black (polished)
    material:T304 stainless steel


    This TSE "Light" version exhaust fits the following BMWs:
    2001-2006 E46 BMW 325i 325ci 330i 330ci
    Turner Motorsport
    Part #: COR14559X
    Price: $565.60 (USD) 
    $789 (Sale - Save 28%)
    Direct Ship
    E46 M3 Shark Injector T2 Race Software (for SCCA T2/T3 Class)

    Shark Injector Performance software includes:

    • Specific Race software developed for SCCA Club Racing
    • Horsepower and torque gains
    • Faster and smoother throttle response
    • Top speed limiter removed
    • 8,600 RPM rev limit
    • Extremely easy to install/uninstall
    • Reversible and reusable

    Performance software is a must-have upgrade on your E46 M3 and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!

    The T2 M3 software was developed during our 2-year campaign with the E46 M3 in the SCCA T2 club racing class (multiple wins and 3rd in 2006 Runoffs, highest finishing E46 M3) From 2013 the E46 M3 was reclassified to the T3 class. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. The rev limit is raised to 8,600 RPM rev limit and the top speed limiter is removed. By fine tuning these maps we've been able to improve the S54 engine beyond what BMW did by making more power and torque and a smoother-running engine. This software is a more aggressive tune than our standard street and Race software and additional engine maintenance and care is advised, including more frequent engine oil changes, oil analysis, valve adjustments, and other maintenance common to race-only vehicles. The minimum octane for this software is 93 AKI.

    The Shark Injector plugs into the diagnostic port inside the E46 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.

    Looking to maximize your power gains? Add a Turner IAT Relocation to combat power-robbing heat soak. The only true plug-and-play remedy to combat heat soak and regain lost power.

    Shark Injector Installation Instructions
    (click to expand)
    Shark Injector installation instructions
    A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
    The minimum octane fuel for this software is 93.
    Shark Injector FAQ
    (click to expand)

    This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and either e-mailed or faxed to Turner Motorsport before shipping. You can download the waiver here.

    This item fits the following BMWs:
    2001-2006 E46 BMW M3 (US models only)
    Shark Injector
    Part #: TMS387
    Price: $314.10 (USD) 
    $349 (Sale - Save 10%)
    Ships in 2 Days
    Free Shipping Free Shipping
    Rear Differential Mounts - Turner Solid Delrin/Aluminum - E46, X3, Z4 Made in the USA These Turner Motorsport solid differential mounts were designed for our championship-winning Grand-Am E46 330s and they are legal in most racing classes where a fully solid aluminum mount is not allowed. To prevent bushing deflection, these E46 diff bushings use Delrin with an aluminum insert. This keeps the differential locked in place which improves handling, feedback, and transfers more power to the wheels. They also last much longer than any rubber mount. If you're tracking your E46 323, 325, 328, or 330 these diff mounts are an absolute must. They can also be used on street cars if slightly higher levels of noise and vibration can be accepted.

    This item fits the following BMWs:
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
    2001-2006 SpecE46 BMW 330i 330ci
    2004-2006 E83 BMW X3 2.5i X3 3.0i
    2003-2006 Z4 BMW Z4 2.5i Z4 3.0i
    Turner Motorsport
    Part #: TDR4680002
    Price: $138.48 (USD) 
    $195.87 (Sale - Save 29%)
    In Stock
    Free Shipping Free Shipping
    Upper Spring Hats/Perches (Pair) - 2.25 Inch / 16mm Pin / Tapered Seat Made in the USA These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

    Spring I.D.Strut Pin Diam.Strut Pin Seat
    2.25"16mmtapered

    Turner Motorsport
    Part #: TSU9980548
    Price: $67.96 (USD) 
    $79.95 (Sale - Save 15%)
    Ships on Sep 21, 2018
    Free Shipping Free Shipping
    on orders $99 and up
    Rear Camber Arm - E36, E46, Z4 - Group N (Reinforced) Designed and built in-house at BMW Motorsport, these are stock rear camber arms from the E36 M3 that have been strengthened by welding a reinforment in between the wishbones. Stiffer than the stock units and still adjustable for camber. This arm is legal in many racing classes where an aftermarket arm is not permitted. Sold individually, two required per car.

    For maximum adjustment solid aluminum camber arms, you may also want to check out our TMS E36/E46 Adjustable Rear Camber Arms .

    This arm does not include a bushing, but you may choose add a bushing using the drop down below. For an additional charge, you can get the bushing pre-pressed into the arm, so it is ready to install on the car (no added shop time or hydraulic press required).

    Sold Individually.
    Genuine BMW Motorsport
    Part #: 33327749778
    Price: $200.97 (USD) 
    $234.23 (Sale - Save 14%)
    Ships on Jul 17, 2018
    Free Shipping Free Shipping
    Turner Motorsport Street/Track Front Fixed Camber Plates - E46 (not M3)

    One of the tricks for getting your BMW to handle better is to add negative camber to the front wheels. This will put more of the tire's width in contact with the ground during cornering. With more rubber there is more grip. BMWs typically have less camber in the front to create understeer. But if you're running a stock setup on the track or autocross you are giving up speed and time as the front tires run out of grip sooner than they should.

    These E46 fixed camber plates are designed from knowledge gained from our highly successful racing campaigns with the E46 in the Speed World Challenge series. These plates are offset for the best camber and caster combination for racing purposes when using the stock-diameter sized springs. Camber increases to between -2.5° to -3.0°, depending on each individual car. While ride height is increased by 1/4", the benefit of these plates far outweighs the minor ride height increase. The rate of camber change is virtually unaffected throughout the range of suspension travel, reducing the need for other geometry correction. Material has also been added to increase surface contact area therefore reducing the strut tower deformation and increasing the strength of the strut towers. Fixed mount camber plates are legal in many racing and autocross classes. These are the perfect camber solution when adjustable plates are not allowed in your class. These are a simple bolt on part for all E46 except the xi and M3 models.

     

    Instructions for Turner E46 Front Fixed Camber Plates


    This item fits the following BMWs:
    1999-2005 E46 BMW 323i 323ci 325i 325ci 328i 328ci 330i 330ci

    Turner Motorsport
    Part #: TSU4680451
    Price: $125.96 (USD) 
    $139.95 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Turner Loaded Backpack Gift Package

    Pick up our rugged OGIO backpack along with some Turner goodies and pocket nearly $25 in savings! Spoil yourself this season!

    Our "Stuffed Backpack" package includes:
    + $50 Turner Gift Certificate
    + Turner OGIO Backpack
    + Turner Pint Glass
    + Turner Cap
    + Turner Keychain
    + Turner Motorsport Sticker Sheet

    Packaged by Turner
    Part #: GP153
    Price: $115.86 (USD) 
    $140.00 (Sale - Save 17%)
    Ships in 6 days
    Free Shipping Free Shipping
    Quantity:   
    Schwaben Metric Bubble Flaring Tool Set

    When replacing old corroded brake lines this is a must have tool to get the job done right. Create a bubble flare to match the connection style is an important part of creating the proper seal. Don't forget your tube cutter.

     

    Features:

    • Creates the ISO bubble flare found on European, Japanese and some domestic model brake lines.
    • Includes hardened steel bar and adapters for 4.75mm,6mm,8mm and 10mm tubing.
    • Durable blow molded case for easy transport and organization

     

     

    Schwaben
    Part #: 006394SCH01A
    Price: $49.96 (USD) 
    $79.95 (Sale - Save 38%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    BMW 5W-30 Twinpower Turbo Longlife Synthetic Oil The BMW 5W30 motor oil is the factory engine oil approved for almost all BMW engines, except for BMW Diesel and some M3/M5/M6 engines. It's the first oil approved in the US for BMW's turbo N20 N54 N55 engines, including the S55 engine in the 2015+ F80 M3/F82 M4. This oil can also be used in E39 M5 and Z8 with the S62 engine, per the label inside the engine compartment. It can also be used in most MINI engines. Replaces the previous part number of 07510017866 (07-51-0-017-866).

    This oil was especially formulated for the USA market to meet compatibility requirements with the high sulfer content in our fuels. It meets BMW LL01 and API SL specs for gasoline engines from 1997 up through today as well as ACEA A3/B3 requirements. This is the current oil used in BMW dealerships.

    In January 2015 BMW changed official oil suppliers from Castrol to Shell. The new oils are designed to meet requirements of both the newer engines as well as older BMWs. This oil can be used in cars with either normally aspirated and or turbocharged engines.

    Beginning with July 2015 production, new models came with 0W20 or 0W30 BMW oil. However, BMW dealerships continued to sell 5W30 until that stock was depleted. The 5W30 is an acceptable alternative to the 0W20 and 0W30 BMW oil per BMW's service bulletin.
    Genuine BMW
    Part #: 83212365946
    Price: $9.49 (USD) 
    $8.85 (Sale - Save 5%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    E36, E46 HRE FF15 18x8.5

    E36 HRE FlowForm 18" Wheels 
    Fr: 18x8.5" ET40 24.8lbs 
    Rr: 18x8.5" ET40 24.8lbs 

    HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price. 

    The FF15 is a multispoke wheel (15 spokes) very similar to HRE's C109 forged 3-piece wheel. The FF15 comes in 18"-20" sizes but appear larger thanks to the long straight spokes that run right to the edge of the rim. The correct offsets locate the wheel in just the right position without the need for spacers and maintaining the proper clearances to the body, brakes, and suspension. The standard 18" color is Tarmac (black) with eleven optional finishes available too.

    The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty. 

    HRE FlowForm Wheel Features - 
    + state-of-the-art technology 
    + lighter and stronger than a cast wheel 
    + stimulating looks 
    + multiple color and finish options encourage personalization 
    + lifetime structural warranty 
    + TUV, VIA, and JWL approved 

    This item fits the following BMWs:
    1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
    2003-2008 E85 E86 BMW Z4 2.5 Z4 3.0 Z4 3.0i Z4 3.0si

    HRE
    Part #: E36FF151885
    Price: $1840.00 (USD) 
    $2300 (Sale - Save 20%)
    Direct Ship
    Free Shipping Free Shipping
    E46 325i/xi Shark Injector Performance Software
    • Unlock torque and horsepower
    • Smoother engine with less hesitation
    • Improved throttle response
    • Rev limit increased to 7000
    • Top speed limiter removed
    • Installs in minutes!

    Performance software is a   must-have  upgrade on your BMW and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!

    The M54 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel while maintaining BMW reliability and smoothness. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. A lot of tuning has been done at the low RPM ranges to improve response. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. We also raise the rev limit to 7,000 and remove the top speed limiter. By fine tuning these maps we've been able to improve the M54/M56 engine beyond what BMW did by making more power and torque and a smoother-running engine.

    The Shark Injector plugs into the diagnostic port inside the E46 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.

    2001-2006 E46 325i (M54/M56 engine) Performance Software Peak Gains

    E46 325i dyno chart
    HP Gain+ 7 @ 5800 RPM
    Torque Gain+ 7 @ 4700 RPM
    New Rev Limit7000 RPM


    E46 325 M54 vs. M56 Engines
    (click to expand)
    Does your 325 have the M56 "SULEV" Engine? Many of the 325's produced for the US -- particularly in California, Massachusetts, and a few other states -- came with a different engine, the M56 which meets "SULEV" (Super Ultra Low Emission Vehicle) emissions classification. A visual inspection of your engine (as shown below) is the best way to determine if your 325 has the M56 SULEV engine.
    Visual Differences of M54 and M56 engine
    Read what others are saying!
    (click to expand)
    greekpsycho, 325i: "I sharked my 325 a few months ago and I noticed a huge difference. This REALLY brought out the best of my car."
    TJ710, 325i: "just did this to my own stock 325i about 3 weeks ago and I definitely felt a difference and it put a smile on my face."
    Dahmwern, 325Ci: "I'm definitely noticing a sweetly smooth power delivery, as well as a noticeable power increase in the low end as you being to accelerate (especially up moderate inclines). Note: This is NOT placebo effect. I drove the same route before and after to compare, and while its not perfectly scientific, it was quite obvious that there were some changes that took place - changes for the better. Like many mods, the car should have come this way!"

    Rob43, 330i: "besides the 7000rpm, removal of the top speed limiter, and very good(improved) throttle response, I got 6.5WHP on the dyno with my Shark injector. That’s worth $300 bucks in my book."
    xixixi, 330xi: "I got the shark for my 330xi, I love it. Shark > all. Why? It gives gains that other "custom tunes," can't. What I liked the most about my shark is shift points. If you can shift decent, you can stay in the 5.5k+ range."
    Douglas, 330Ci: "Just last week I had your Shark Injector installed in my 2001 330Ci. What a difference it makes! I already loved the car and it’s a great car to drive, but this takes it to a new level."
    Steve 330i: "I bought the software and CAI by Jim C. Installed both at the same time and have put around 500 miles on over the last month. The car is amazing to drive, and the software seemed to make the power band a bit flatter, less of a dip and a bit better at the lower RPMS."

    nleksan, 330i ZHP: "Ditch the Brand XXXXX software and switch it up for the newly-released Conforti Shark Injector for your car. It will give you a higher redline, no top-speed, more power, and much better throttle response, even over the Brand XXXXX."
    3579az, 330i ZHP: " The throttle response problem has been solved. I can now perform perfect rev-matches with ease, unlike before. I've been heel-and-toe downshifting all day with a major success rate of perfect shifts, which is a LOT more than could be said compared to stock. I can now pull cleanly through the rev range without feeling any hesitation or dead spots. I have confirmed that the dead spot that was painfully obvious before the flashing… is gone."
    pyreguy, 330i ZHP: "I have been VERY pleased with mine. The dead spot being irradiated was the best thing EVER."
    Scott, 330i ZHP: "Very increased acceleration - especially from around 3,000 to 6,000. The car feels like a bullet! It is the same smooth kind of power too - just more of it, delivered continuously to the top rpm. So 3rd feels more like 2nd gear now! Throttle transitions are much more refined. So when in low gears, on and off throttle changes are very seamless and smooth (no jerking) - and the change has made shifting gears easier - especially first to second. So now my car is much more fun to drive and shows engine performance that is better matched to the incredible handling ability it has. I'm very pleased with this upgrade and can't thank you enough!!!
    Shark Injector Installation Instructions
    (click to expand)
    Shark Injector installation instructions
    A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
    The minimum octane fuel for this software is 91.
    Shark Injector FAQ
    (click to expand)

    This item fits the following BMWs:
    2001-2006   E46 BMW  325i 325ci 325xi
    Shark Injector
    Part #: E46-325-SHARK
    Price: $314.10 (USD) 
    $349 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    BMW Motorsport Rain Jacket This rain jacket is lightweight, but don't let that fool you — it will protect you from wind and rain and look great doing it. Navy blue design with red accents and a tri-color ///M stripe on the right sleeve, it's a stylish way to show your BMW pride while staying warm and dry at the same time.
    Genuine BMW
    Part #: 8014244644651
    Price: $66.45 (USD) 
    $78 (Sale - Save 15%)
    Ships in 4 days
    Men's BMW Motorsport Polo If you're looking to show off your BMW pride, but you need something just a bit more highbrow than a t-shirt, this BMW Motorsport polo shirt is just the ticket. Both men's and women's designs feature subtle touches like BMW Motorsport lettering on the left breast and a small BMW roundel on the sleeve. Men's shirts are Team Blue while women's shirts are white with a Motorsport stripe motif.
    Genuine BMW
    Part #: 801424464315
    Price: $93.72 (USD) 
    $110 (Sale - Save 15%)
    Ships in 4 days
    Liqui Moly Voll-Synthese Energy 0w-40 Engine Oil - 5 Liter

    Liqui-Moly's Voll-Synthese Energy engine oil is specifically formulated for optimum oil penetration speed, deposit prevention, and resistance to aging. These factors allow for exceptional gasoline or diesel engine cleanliness, keeping the surfaces of the engine and engine components free from carbon and sludge deposits. This allows the oil to form a stronger film that in turn helps prevent wear much more efficiently than many standard oils. This also allows for easy, smooth engine operation that results in better responsiveness and less total fuel consumption.

    Meets the following requirements;

    • ACEA A3-98/B3-98
    • API SJ-CF
    • BMW [Longlife] LL-98
    • Daimler (MB 229.1)
    • VW 502.00 - 505.00

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Liqui-Moly
    Part #: 2050
    Price: $40.46 (USD) 
    $44.95 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Genuine BMW Oil Drain Plug with Washer- E8X F22/3 F8X E30 E36 E46 E9X F3X E12 E28 E34 E39 E6X F07/10/11 G30/1 E24 F06/12/13 E32 E38 F01/02 F48 G01 F25/26 F15/16 E7X

    This genuine BMW replacement oil drain plug with washer is perfect to replace your old beat up or stripped oil plug for easy removal and oil changes.

     

    Fits the following BMW chassis:
    E8X F22/3 F8X E30 E36 E46 E9X F3X E12 E28 E34 E39 E6X F07/10/11 G30/1 E24 F06/12/13 E32 E38 F01/02 F48 G01 F25/26 F15/16 E7X

    Genuine BMW
    Part #: 11137535106
    Price: $3.75 (USD) 
    $4.17 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Liqui-Moly Pro-Line Engine Flush - 500ml

    Looking to rid your engine of built up gunk and sludge? Liqui-Moly's Pro-Line Engine Flush is perfect for lifting away engine sludge, both oil-soluble and insoluble, from the surfaces of the block and interior components and oil passages, allowing oil to flow much more freely afterward, enabling the new oil to provide better protection and the engine to run smoother and easier. This is done by using a proprietary blend of detergents and dispersant additives that are harsh and fast acting on build-up but neutral to seals, gaskets, and other internal engine materials. This provides a gentle but rapid cleaning process that eliminate contaminants, restoring power and engine efficiency.

    Properties:

    • Gentle and rapid cleaning
    • Neutral to seals and other materials installed in the engine
    • Compatible with catalytic converters
    • Highly economical
    • No additional environmental pollution
    • Simple to use

    Benefits:

    • Removes deposits & residues
    • Dissolves sludge & lacquer and isolates solid particles & liquid contaminants
    • Improves the combustion process and restores full engine performance
    • Prevents corrosion of unprotected metal surfaces
    • Recovers oil lubricating properties
    • Suitable for all gasoline and diesel engines.

    Instructions:

    Add to engine oil before engine oil change. Let engine run on idle speed for 10 minutes. Drain oil, change oil filter and re-fill with fresh high quality oil. Contents sufficient for 5 liter engine oil capacity. Fully compatible with all commercially available engine oils.

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Liqui-Moly
    Part #: lm2037KT
    Price: $11.69 (USD) 
    $12.99 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Liqui-Moly Synthoil Race Tech GT1 10w-60 Engine Oil - 1 Liter

    Synthoil Race Tech GT1 is a modern high performance engine oil formulated for engines that are experience extreme load pressures. Fully synthetic, the oil combines base oils and additives to provide exception lubrication and engine wear protection. This design and composition makes it a great choice to used for racing and other demanding needs. Great for both gasoline and diesel engines.

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Liqui-Moly
    Part #: 2068
    Price: $8.95 (USD) 
    $9.95 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Forge
    Part #: TP-45B
    Price: $22.68 (USD) 
    $25.20 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    4MM Silicone Vacuum Hose - Blue - 9 Feet Car suffering from vacuum leaks? This vacuum hose has a 4mm inner diameter. 
    Forge
    Part #: vc04
    Price: $10.76 (USD) 
    $11.95 (Sale - Save 10%)
    In Stock
    Quantity:   
    5MM Silicone Vacuum Hose - Blue - 9 Feet Car suffering from vacuum leaks? This vacuum hose has a 5mm inner diameter. 
    Forge
    Part #: vc05
    Price: $12.56 (USD) 
    $13.95 (Sale - Save 10%)
    In Stock
    Quantity:   
    4MM Silicone Vacuum Hose - Black - 9 Feet Car suffering from vacuum leaks? This vacuum hose has a 4mm inner diameter. 
    Forge
    Part #: vc04b
    Price: $12.56 (USD) 
    $13.95 (Sale - Save 10%)
    In Stock
    Quantity:   
    6MM Silicone Vacuum Hose - Red - 9 Feet Car suffering from vacuum leaks? This vacuum hose has a 6mm inner diameter. 
    Forge
    Part #: vc06r
    Price: $15.26 (USD) 
    $16.95 (Sale - Save 10%)
    In Stock
    Quantity:   
    BMW M Mobility Kit - Emergency Tire Repair and Air Compressor Kit This is the second generation "M Mobility Kit" from BMW. Unlike the older, more expensive kit, the tire sealant and air compressor of this can be used separately, meaning the air compressor can be used for occasion inflation (without needing to pump in sealant fluid). This kit is an absolute MUST HAVE on all newer BMW's that have no spare tire. It can also be a life-saver on any other BMW, even if you have run fun flats or a spare tire.

    The kit consists of a convenient zip-up nylon storage bag which contains a portable 12 volt DC air compressor (with pressure gauge), one bottle of tire puncture repairing sealant gel, universal compressor adapters, valve stem removal tool, one pair of stretch-fit black gloves to keep your hands clean, and an instruction manual to guide you through the process of performance a roadside tire repair on your BMW. And it stows neatly in your trunk until needed. We keep one of these kits in all of our BMWs, and think you should too. Replaces part number 71100413439.
    Genuine BMW
    Part #: 71102333674
    Price: $125.32 (USD) 
    $156.00 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Wheel Bolt Pattern Gauge

    This Schwaben tool easily and quickly measures wheel bolt circle on multible lug patterns. Including 3-4-5 and 6 lug patterns. Construction is a quality all aluminum billet tool made to last a lifetime.

    • X3 = 3 lug wheel sizes on one side of pattern tool. Containes 10 different bolt patterns. 
    • X4 = 4 lug wheel sizes on one side of the pattern tool. Contains 10 different bolt patterns.
    • X5 = 5 lug wheel sizes and shows on two sides of the pattern tool. Contains 12 different  bolt patterns.
    • X6 = 6 lug wheel sizes and shows on one side of pattern tool. Contains 5 different  bolt patterns.

    NOTE: Loosen sliding arm, insert into wheel or center on studs. Tighten thumb screw gently. Measure bolt pattern on inside of arm.

    NOTE: 5 lug patterns has measurement on two different sides of the tool. if it does not line up to a mark look on opposite side for more 5 lug sizes.

     

    Schwaben
    Part #: 009619SCH01A
    Price: $18.71 (USD) 
    $24.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Head Gasket Set - E39 525i/530i, E46 325/330i/xi, E53 X5 3.0, Z3 2.5/3.0, Z4 2.5/3.0 - 2001-2002 models with M54 Engine This set of top-end gaskets is a both a time and money saver. It includes all of the commonly replaced gaskets, seals, and o-rings when pulling the cylinder head for overhaul. Having these on hand instead of chasing them down at the last minute will save you time, money, and frustration. With the head off the car you're going to want or need to replace these items anyway to ensure it's free of fluid and vacuum leaks. This is especially important because the newer BMW models have very strict emissions controls and vacuum and oil leaks can create turmoil in the system. Even if you're not pulling the head this set includes so many valuable parts you'll want to keep this on hand to use for spares.

    Note: because of rebuild options, the head gasket is not included in this set. Add one from the options below.

    Complete Parts List
    (click to expand)
    BMW p/nQtyDescription
    071199630731screw plug seal ring
    071199631301plug gasket ring
    071199634181timing chain tensioner seal ring
    111290709901valve cover gasket set
    111275264471oil fill cap seal ring
    113490644572valve stem seal,
    2 sets = 24 valves
    113614335132VAN0S plug
    113614338171VAN0S cover profile gasket
    113617037132VAN0S solenoid o-ring
    115314358081coolant pipe o-ring
    115375093571thermostat housing profile gasket
    116114366311intake manifold runner profile gaskets
    116114374531idle control valve o-ring
    117275052591air pump valve profile gasket
    121417483982camshaft position sensor o-ring
    135475047281profile gasket
    135475047291profile gasket
    136217432991o-ring
    136414374866fuel injector o-ring
    136414374876fuel injector o-ring
    181075023462exhaust manifold flange gasket
    324110935962VAN0S oil line seal ring
    116217329692exhaust manifold heat shield


    This item fits the following BMWs:
    2001-2002 E46 BMW 325i 325ci 325xi 330i 330ci 330xi
    2001-2002 E39 BMW 525i 530i
    2001-2002 E53 BMW X5 3.0i
    2001-2002 Z3 BMW Z3 2.5i Z3 3.0i
    Genuine BMW
    Part #: 11127507597
    Price: $380.69 (USD) 
    $434.53 (Sale - Save 12%)
    Ships in 5 days
    Free Shipping Free Shipping
    Genuine BMW E46XI 3 Series Floor Mat Set E46xi 3 Series 4 pc. Floor Mat Set with "BMW" logo, these fit all E46 3 series from 1999 to 2005. These ONLY fit the AWD XI. They do not fit right hand drive models (these are for left hand drive models only). These are genuine BMW factory floor mats, just like the dealer offers -- only less expensive! Please choose your color below to match your interior. Mats include velcro fasteners.

    These BMW floor mats fit the following cars:
    2001-2005 E46 BMW 325xi 330xi
    Genuine BMW
    Part #: 8211002659X
    Price: $112.98 (USD) 
    $130 (Sale - Save 13%)
    In Stock
    Upper Spring Hats/Perches (Pair) - 2.5 Inch / 14mm Pin / Square Seat Made in the USA These aluminum upper spring hats are for coil over struts with a 2.5" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

    Spring I.D.Strut Pin Diam.Strut Pin Seat
    2.5"14mmsquare

    Turner Motorsport
    Part #: TSU9980250
    Price: $56.95 (USD) 
    $59.95 (Sale - Save 5%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Turner Motorsport Race Alternator Pulley For E46/Z3 M52TU Bosch Alternator

    Part of the process of building a proper race car is to delete and simplify portions of the wiring harness. This not only saves weight and reduces complexity, but it also allows you to run a smaller, lighter racing battery. So why is your alternator still charging at the original rate?!? This M52TU racing alternator pulley underdrives the alternator more than our standard Power Pulley, freeing up horsepower and reducing alternator wear. This pulley is over 80% larger than the original stock pulley. With less electrical load, you don't need the original alternator output anymore. You can drive the alternator less and return that "lost" horsepower back to the engine. This part is an upgrade to the alternator pulley already included in our Power Pulley kit and was developed and race-proven on our E46 Touring Cars.

    Because this pulley is so much larger than the original (80%), special care will need to be taken so that it does not interfere wtih other components on the engine - power steering lines, oil cooler lines, coolant hoses, etc. The upper idler pulley is no longer needed with the racing pulley and will be removed. A new belt is required (add one from the options below).

    For Bosch alternators only.

    The remainder of the Turner Power Pulley Kit is required (water pump and power steering pump pulleys).

    Turner Motorsport
    Part #: TEN9922778TU
    Price: $33.21 (USD) 
    $139.95 (Sale - Save 76%)
    In Stock
    Free Shipping Free Shipping
    $100 Turner Motorsport Gift Package Special Gift Package! This BMW holiday gift package includes a $100 Turner Motorsport gift certificate (the perfect gift for any BMW enthusiast) and a Genuine BMW ceramic coffee mug. That's essentially a free authentic BMW coffee mug to give for that BMW lover on your shopping list. No matter what BMW your gift recipient owns, or what they need, you know they can choose exactly what they want from our THOUSANDS of BMW products, parts and BMW accessories. Offer valid while supplies last.

    Limit 1 Gift Package per customer.
    Packaged by Turner
    Part #: GC100
    Price: $100.00 (USD) 
    $118.95 (Sale - Save 16%)
    Ships in 5 days
    Free Shipping Free Shipping
    Quantity:   
    Upper Spring Hats/Perches (Pair) - 60mm / 14mm Pin / Square Seat Made in the USA These aluminum upper spring hats are for coil over struts with a 60mm coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

    Spring I.D.Strut Pin Diam.Strut Pin Seat
    60mm14mmsquare

    Turner Motorsport
    Part #: TSU9980007
    Price: $56.95 (USD) 
    $59.95 (Sale - Save 5%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Extra-Large Turner Motorsport Toolbox Sticker (5x8

    THE IDEAL TOOLBOX STICKER!

    Cast some positive Turner vibes on your track build with this extra-large vinyl TURNER MOTORSPORT sticker. About as long as an arm, this is a great statement piece anywhere around the shop. 

    While supplies last. Limit one per customer, please!

    Turner Motorsport
    Part #: 148-410
    Price: $8.95 (USD) 
    $19.95 (Sale - Save 55%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Front Wheel Bearing - E46Xi models This replacement OEM FAG front wheel bearing fits the following BMWs:
    2001-2005 E46 3 Series 325xi 330xi 325xi Wagon
    Packaged by Turner
    Part #: 31221095702
    Price: $29.48 (USD) 
    $56.64 (Sale - Save 48%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Manual BMW Shift Knob - BMW Performance Aluminum/Leather - 5 or 6 Speed Pattern This Genuine BMW manual shift knob fits all 1982 and on BMWs. It "snaps" onto your shifter level just as your stock shift knob does, and can be installed in a matter of seconds. This knob is much shorter and smaller than the "standard" knobs, and is weighted for better shifter feel. Available with your choice of either 5 speed or 6 speed shift pattern (select your option below).

    This knob is right out of the BMW Performance catalog, BMW Performance Shifter installed and features supple black alcantara suede (with great grip!) and a weighted body. This knob was specifically designed and marketed for the E82 / E88 1 Series and the E90/E92 3 Series, BUT it also fits all manual transmission BMWs from 1982 through present. This means this great looking and great feeling shifter knob can be used on almost every BMW (except 1981 and earlier).

    Note that many newer models have a 1-piece knob + boot. This is standard on most M cars and on all cars that have an illuminated shift knob. We sell new replacement boots to use with this shift knob, choose the option below if you would like one included with your order (not for E9X M3).
    Genuine BMW
    Part #: TMS1778
    Price: $77.99 (USD) 
    $94 (Sale - Save 17%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Seatbelt 4-point Race Harness Receptacles - Macht Schnell If you're going to use a 4 point racing harness with your racing or sport seat and don't want to drill through your floor and carpet, these harness adapter plates are perfect*. These sandwich in between your slider and seat bracket for a strong and secure mounting point. They are made from high-strength steel and powedercoated in stealthy black. Choose from a bolt-in or clip-in style harness end. These will only work with the Macht Schnell floor mounts.

    * - note that most racing harness manufacturers will advise that drilling through the floor is the best method for mounting harnesses. This allows you to locate the mount in the ideal location and angle to fit your driving position. The proper installation is paramount to ensure the harness works correctly in an impact.

    Sold per seat.

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i 1M Coupe
    1992-1998 E36 BMW 318i 318is 318ti 323is 325i 325is 328i 328is M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (not convertibles)
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    Macht Schnell
    Part #: 79.12.15X
    Price: $102.50 (USD) 
    $125 (Sale - Save 18%)
    In Stock
    Free Shipping Free Shipping
    Roof Spoiler - E46 323ci, 325ci, 328ci, 330ci, M3 This custom roof spoiler will help your BMW E46 2 door stand out from the crowd. Made of durable ABS plastic and designed for a quick and easy installation, this roof spoiler gives your BMW a custom look in minutes. Installs with double sided tape (add from the options list below).

    This item fits the following BMWs:
    2000-2006 E46 BMW 323ci 325ci 328ci 330ci M3
    Turner Motorsport
    Part #: E462DABSROOF
    Price: $103.39 (USD) 
    $108.9 (Sale - Save 5%)
    Ships on Jul 9, 2018
    Free Shipping Free Shipping
    Rear License Plate Holder - E46, E53 X5, E60, E85 Z4 & MINI This is the genuine BMW black plastic rear license plate mounting bracket. This bracket mounts to the trunk lid, and the license plate mounts to this bracket. It's also a good idea to get new Genuine BMW hardware for mounting the frame and the plate. You can also select these from the Additional Options listed below.


    This item fits the following BMWs:
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
    2000-2006 E53 BMW X5 3.0i X5 4.4i X5 4.6is X5 4.8is
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    2002-2006 R50 MINI MINI Cooper
    2005-2008 R52 MINI MINI Cooper Convertible, MINI Cooper S Convertible.
    2002-2006 R53 MINI MINI Cooper S
    Genuine BMW
    Part #: 51188238061
    Price: $38.54 (USD) 
    $43.16 (Sale - Save 12%)
    Ships on Jun 25, 2018
    Free Shipping Free Shipping
    on orders $99 and up
    E46 330i SPEC Stage 2+ Performance Clutch Kit The SPEC Stage 2+ clutch is a premium, no compromises heavy-duty clutch upgrade for the 2001-2003 E46 330i/ci (5-speed transmission). It goes beyond the standard Stage 1 upgrade with a higher-capacity clutch disc rated at 545ft-lbs! Where the stock clutch is well-known for premature wear when driven hard and the factory dual mass flywheel is a known failure point, the SPEC clutch delivers with an over-engineered, performance-oriented clutch solution.

    The stock 330 clutch was not designed for performance. It works fine for a daily driver street car with no mods but performance and longevity quickly drop off when adding more power or using the car for aggressive street, autocross, or track use. A lot of our customers also hate the self-adjusting clutch (SAC) mechanism and the clutch delay valve that makes clutch engagement inconsistent and unnatural feeling. It's no wonder that for the Grand-Am Cup touring car races the rules specified an E36 M3 clutch! If you're unhappy with the stock clutch feel or your future plans include additional upgrades that boost torque, then a heavy-duty clutch is what will be needed. The SPEC Stage 2+ clutch consists of a carbon-Kevlar friction material paired with a heavy-duty pressure plate. The clutch is stronger and grabs harder than the factory clutch. It has a much more robust feel and engagement. And with this specification the clutch will never be a weak point. The SPEC clutch is designed to work with the stock dual mass flywheel or with a lightweight aluminum single-mass flywheel.

    The real weak point in the driveline is in the flywheel. The stock dual-mass flywheel has rubber damper discs inside that will wear out over time. Heat and aggressive driving will accelerate their wear. Even if the clutch contact surface is not showing wear the inner rubber linings most likely are. On most clutch replacements we strongly advise getting a new flywheel at the same time to avoid duplicating the work. You can use the SPEC clutch with the stock or an aluminum flywheel. A machined steel flywheel is also an option as a middle ground. Both the SPEC steel and aluminum flywheels are lighter than stock and will be single-mass. There will be a lot more noise and 'gearbox chatter' with the aluminum but the tradeoff is a much better acceleration and quicker revving. For daily driver commuting you will probably be happiest with the stock flywheel. For the ultimate in sports car feel use the aluminum.

    SPEC Clutch is one of the premier clutch and flywheel suppliers to the tuner market. They are often found on the most highly tuned import and domestic vehicles. They are recent players in the German car community with a special focus on the newer turbo BMW models with high torque output. SPEC has been proven time after time to provide superior performance, drivability, and longevity to the most hardcare enthusiasts around the globe.

    E46 330 SPEC Clutch Kit contents:
    + carbon-Kevlar clutch disc
    + heavy-duty pressure plate
    + heavy duty throw-out bearing

    This item fits the following BMWs:
    2001-2003 E46 BMW 330i 330ci 330xi only for 5-speed manual transmission
    Spec Clutches
    Part #: SB033H
    Price: $1911.93 (USD) 
    $2040.24 (Sale - Save 6%)
    Direct Ship
    E46 M3 D-Force EmPower 18-inch Wheel Set These striking mesh style wheels are produced by D Force, the same manufacturer as the highly successful LTW5 wheels, and are a excellent alternative to the factory 18" wheels. This EmPower wheel set is a staggered fitment - 18x8.5 in the front and 18x9.5 in back. The front wheels are a half-inch wider than stock to allow a wider tire for more front end grip. The mesh styling of these wheels is drawn from other high end factory and aftermarket wheels so they almost look OEM. They are available in either silver or anthracite (dark grey) centers with a polished outer lip. And one of the best features of these wheels is their weight - under 21lbs for either a front or rear wheel! They are exceptionally strong too - using a flow forming casting and CNC process that is nearly as strong as a true forged wheel. If you've gotten a bit tired of the factory 18" look, these are an exceptional alternative for the money! Price is for a set of two front and two rear wheels (includes rear centering ring). No spacers required! Add new center caps or ///M badge from the menu below.

    Wheel Specs:
    Front: 18x8.5 / ET 40 offset / 19.2lbs. Recommended tire size: 235/35-255/35-18
    Rear: 18x9.5 / ET 25 offset / 20.9lbs. Recommended tire size: 255/35-275/35-18

    For more information on BMW wheels and wheel info in general, check out our Wheel Fitment Guide by clicking here.

    This wheel set is intended for the following BMWs:
    2001-2006 E46 BMW M3
    D-Force Wheels
    Part #: TMS14397
    Price: $1366.28 (USD) 
    $1378.32 (Sale - Save 0%)
    Direct Ship
    E46 Euro Center Console Tray (replaces cupholder console) Convert your standard cup holder console insert to the Euro storage box with sliding cover. If you are like many BMW owners who don't like eating & drinking in your BMW, you'll appreciate this useful storage box and won't miss the awkward BMW cupholders.

    The Genuine BMW euro tray features two compartments with a sliding cover on the forward compartment -- perfect for discretely storing an iPod, MP3 player, cell phone, or other items. How many times have you felt silly putting your cell phone or iPod in the cupholder? Now you can give those items their own compartment while giving your center console a cleaner, less cluttered look. Best of all, this simply repaces the cupholder insert, and snaps into place as a factory part should. Comes in three matching interior colors: black (pictured)(51167038323), grey (51167038324), or beige(51167038325).

    This euro interior console fits all E46 3 series (coupe, sedan, convertible and wagon), including:
    1999-2000 323i, 323Ci, 328i, 3238Ci
    2001-2005 325i, 325xi, 325Ci, 330i, 330xi, 330Ci
    2001-2006 E46 M3
    Genuine European BMW
    Part #: 51167038323X
    Price: $66.47 (USD) 
    $77.56 (Sale - Save 14%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Turner Motorsport Track Front Adjustable Camber/Caster Plates - E46 M3 Made in the USA These our the Turner Camber Plates used on our Championship-winning E46 M3 race cars. These plates adjust camber and caster and have a lot of important motorsport-developed features that other camber kits do not. These were a clean-sheet design when we raced the E46 M3 for five seasons in the Grand-Am/IMSA GS class. Design Highlights -
  • preserves the correct E46 M3 geometry
  • separate sliding camber and caster adjustments
  • maximum shock travel
  • light weight
  • durable materials
  • large surface area
  • ease of use
    The Turner E46 M3 Race Camber Plates are the most advanced design on the market. These are designed specifically for the E46 M3 - no shortcuts or cookie-cutter components. We started with a fresh design to make these very user friendly and easy to install and set up. The E46 M3 front suspension has unique geometry and the strut is mounted at an angle that can put significant side loading on the strut shaft if it's not located properly. The location and angles for the main bearing were carefully engineered to allow the proper motion ratio and strut angles during adjustment. This greatly reduces bending forces on the strut itself which improves performance and longevity. By designing for one chassis we're able to focus on what works best in that application - proper fitment and operation without unnecessary adapters, easy-to-use camber and caster adjustments, and an intelligent modular design.

    Another important feature of the Turner Camber Plates is the size of the upper plate. Our plates have a very large surface area to better spread strut forces through the strut tower. A smaller upper plate, like those found on competitor's kits, will localize strut forces and contribute to strut tower deformation ('strut tower mushrooming'). This is a very important feature especially as these cars get older and spend more time on the track. Deformed strut towers are a serious performance and safety concern and our camber plates are properly designed to handle the loads. The factory strut reinforcement plates are not required with our camber plates (but you can use them if you want to).

    Since this design is specific to the E46 M3, we can build it with the bare minimum of adapters and extra hardware. This not only cuts down on confusion but makes it easier to assemble and operate. We use the correct-sized bearing for the 16mm strut shaft; no sleeves or bearing adapters required. Only a small stainless steel spacer and the upper spring hats from your coil over kit are all that's required to install. We also produce the upper spring plates if you need them (see Additional Items below). We have used our camber plates with most of the major strut manufacturers on the market - AST, Koni Motorsport, Moton, Ohlins, MCS, Bilstein, and KW.

    There are four upper spring hat options with our Race Camber Plates:
    60mm60mm I.D. coil over racing spring; select a 14mm or 16mm shock stem; select a tapered or square shock stem base
    2.25"2.25" I.D. coil over racing spring; select a 14mm or 16mm shock stem; select a tapered or square shock stem base
    2.50"2.50" I.D. coil over racing spring; select a 14mm or 16mm shock stem; select a tapered or square shock stem base
    stockstock-sized springs; 16mm shock stem; select a tapered or square shock stem base
    Click here for the full listing of E46 M3 upper spring perches. or call us directly. The price for the camber plates does not include upper spring hats.

    Clickhere for more information and installation and setup instructions.

    This item fits the following BMWs:
    2001-2006 E46 BMW M3
  • Turner Motorsport
    Part #: TSU4680651
    Price: $338.15 (USD) 
    $355.95 (Sale - Save 5%)
    In Stock
    Free Shipping Free Shipping
    Turner Motorsport Street/Track Rear Adjustable Camber Arms (Pair) - E36, E46, E85

    Top seller! The Turner Adjustable Rear Camber Arms: The Only Adjustable Arms Approved for Grand-Am Continental Tire Challenge Racing Series

    Why you should use Turner Motorsport camber arms on your car:

    • If you have a lowered car and have run out of adjustment with the stock camber arms.
    • If you have a track car and are looking for increased camber adjustment, light weight pieces, stronger components, and improved suspension handling
    • Two bushing styles to meet your needs: solid rod-end for track-only use, or rubber bushing for mixed street/track use (approved by Grand-Am!)
    • The high range of adjustment allows a full racecar setup or a heavily lowered car to maintain factory specifications.
    • Only high quality and high strength materials and components are used
    • Aluminum camber arms are designed as a lightweight component, thereby reducing wear and tear on other, more critical parts (rear subframe, control arm bushings, etc). Each camber arm weighs only 2.5 lbs making for a total of 5 lbs for both parts! Stock camber arms weigh 3 lbs each. We have seen competitor's arms that weigh twice as much!
    • Hardcoat anodized aluminum, stainless steel turnbuckles, and stainless rod ends to all but eliminate corrosion from getting into the threads and making adjustment difficult.
    • CNC-machined double shear design for ease of installation, high strength, and choice of outside bushing material. But we do suggest using with (outer bushing # 33326775551) for best performance.
    • Easy adjustment - our main adjustment point is on the outside by the wheel so there is no need to work around the exhaust or subframe to adjust camber.
    • All hardware included.

     


    Installation Instructions:
    Instructions for Rod-End Style (TSU9940001)
    Instructions for Bushing-End Style (TSU9940B77)

    This item fits the following BMWs:
    1992-1999 E36 BMW 318i 318is 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2001-2006 SpecE46 BMW 330i 330ci
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe

     

    Turner Motorsport
    Part #: TSU9940X
    Price: $254.95 (USD) 
    $299.95 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    E46 323/328 Shark Injector Performance Software
    • Unlock torque and horsepower
    • Smoother engine with less hesitation
    • Improved throttle response
    • Rev limit increased to 7000
    • Top speed limiter removed
    • Installs in minutes!

    Performance software is a must-have upgrade on your BMW and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!

    The M52TU performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel while maintaining BMW reliability and smoothness. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. We also raise the rev limit to 7,000 and remove the top speed limiter. By fine tuning these maps we've been able to improve the M52TU engine beyond what BMW did by making more power and torque and a smoother-running engine.

    The Shark Injector plugs into the diagnostic port inside the E46 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.

    1999-2000 E46 323i (M52TU engine) Performance Software Peak Gains

    E46 323 dyno chart
    HP Gain+ 14 @ 6000 RPM
    Torque Gain+ 6 @ 5000 RPM
    New Rev Limit7000 RPM


    1999-2000 E46 328i (M52TU engine) Performance Software Peak Gains

    E46 328i dyno chart
    HP Gain+ 15 @ 6200 RPM
    Torque Gain+ 12 @ 3500 RPM
    New Rev Limit7000 RPM

    Read what others are saying!
    (click to expand)
    DBALZE, 323Ci: "The shark injector is awesome! After I put it in, I could definitely feel the quicker throttle response and more power throughout the acceleration curve. Definitely worth the money to me!"
    chrisct, 323Ci: "I installed an XXX short ram cold air intake and the shark injector on my 323Ci and I couldn't be happier. For me the biggest advantage was smoothing out the throttle response, but it definitely feels snappier."
    hqbmw, 328Ci: "This Shark really woke up my 328Ci. Cost per performance increase is as good as it gets! Also getting 10 to 15% better fuel economy in "normal" driving."
    huyner328, 328Ci: "First change I would like to mention is the increased throttle response, as soon as I shifted and floored it, the car would pull. From 3400rpms to about 5000rpms I think was the sweet spot that gave me a nice little grin on my face. Next I tested the Redline of my car, yup another grin on my face. I definitely noticed that the car moved a little bit quicker with not as much gas consumption on the MPG Gauge. Overall, awesome mod."
    Shark Injector Installation Instructions
    (click to expand)
    Shark Injector installation instructions
    A capable battery charger is required for the installation. The charger provides backup power supply to the regular car battery during installation. It must be capable of holding a continuous 10amp charge for the full installation (15-20 minutes).
    The minimum octane fuel for this software is 91.
    Shark Injector FAQ
    (click to expand)

    This item fits the following BMWs:
    1999-2000 E46 BMW 323i 323ci 328i 328ci
    Shark Injector
    Part #: TMS3500
    Price: $314.10 (USD) 
    $349 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    E46 323i/325i Touring H&R Coil Over Suspension

    The H&R Coil Over kit takes the traditional shock/spring package one step further. H&R combines their progressive-rate springs with specially valved shocks and adds height adjusters that let you set the ride height to your own personal tastes. These coil overs are designed for street use with progressive rate springs that start out soft and stiffen as they are compressed. This helps to keep the ride compliant while still giving better handling and balance.

    H&R designs each suspension to work as a coil over. This means that the correct amount of travel has been built into each shock. And the shocks are valved specifically for the spring rates to give a tight and controlled ride without being harsh or ultra-stiff. Each H&R coil over is TUV tested and approved and meets ISO quality standards. These are used with the stock strut and shock mounts for a quick and easy install.

    SPECIAL PRICING FOR A VERY LIMITED TIME!
    FREE GROUND SHIPPING


    Height adjustment range:
    F: -1.2-2.3"
    R: -.75-2.0"

    This coilover kit fits the following BMWs:
    1999-2005 E46 BMW 323i 325i Wagon

    H&R
    Part #: 29480-4
    Price: $1184.95 (USD) 
    $1580 (Sale - Save 25%)
    Direct Ship
    Free Shipping Free Shipping
    Clutch Kit - E39 525i, E46 323/325, Z3 2.5, Z4 2.5 Clutch Kit for E46 323 all, E46 325i -2/03 (not Xi), Z3 2.5, Z4 2.5. This is a complete kit, including clutch disc, pressure plate, throw-out bearing. we offer the clutch alignment tool as a separate item below. Fits the below models with manual transmission only:
    2001-2003 E39 525i - sedan, wagon
    1999-2000 E46 323i, 323ci - sedan, coupe, wagon, cabrio - M54 and M56 engines
    2001-2003 E46 325i, 325ci with M54 engine - sedan, coupe, wagon, cabrio
    2001-2003 E46 325i sedan with M56 engine
    2001-2002 Z3 2.5
    2003 (up to 10/03) Z4 2.5i
    Sachs
    Part #: 21217523620
    Price: $318.71 (USD) 
    $370.57 (Sale - Save 14%)
    Ships in 5 days
    Free Shipping Free Shipping
    Head Gasket Set - E39 528i, E46 323/328, Z3 2.3/2.8 This is a set of gaskets and seals that are commonly replaced when the cylinder head is off the M52TU engine.

    This set of gaskets is a both a time and money saver. It includes all of the commonly replaced gaskets, seals, and o-rings when performing this overhaul. Having these on hand instead of chasing them down at the last minute will save you time, money, and frustration. With this area of the engine apart you're going to want or need to replace these items anyway to ensure it's free of fluid and vacuum leaks. This is especially important because some states have very strict emissions regulations and vacuum and oil leaks can lead to failed inspections tests. On newer cars this can also create issues in the on-board diagnostics system. Even if you're not pulling the head this set includes so many valuable parts you'll want to keep this on hand to use for spares.

    Complete Parts List
    (click to expand)
    BMW p/nQtyDescription
    071199630731gasket ring, back of cylinder head
    071199634181gasket ring, timing chain tensioner
    111275264471oil cap gasket ring
    (under BMW logo cover)
    111290709901valve cover gaskets
    (main valve cover, spark plug holes)
    113490644572valve stem seals
    (2 packs = 24 total)
    113614335132blind plug in VAN0S unit
    113614338171VAN0S unit profile gasket
    113617037132VAN0S solenoid o-ring
    115314358081o-ring for cylinder head cooling hoses
    115375093571thermostat housing profile gasket
    116114366371intake manifold gaskets
    116114374531sealing o-ring on idle control valve
    116117161741throttle body profile gasket
    117275052591air pump valve gasket
    121417483982camshaft sensor o-ring
    135314381451o-ring
    135314381461o-ring
    135317202511o-ring
    135317202521o-ring
    136217432991intake manifold temp sensor o-ring
    136414374866fuel injector o-ring
    136414374876fuel injector o-ring
    183014363342exhaust manifold-to-exhaust seal ring
    183014401832exhaust manifold-to-exhaust seal ring
    183017168882exhaust gasket
    324110935962VAN0S oil line o-ring


    This item fits the following BMWs:
    1999-2000 E46 BMW 323i 323ci 328i 328ci
    1999-2000 E39 BMW 528i
    1999-2000 Z3 BMW Z3 2.3 Z3 2.8
    Genuine BMW
    Part #: 11121436822
    Price: $473.90 (USD) 
    $540.93 (Sale - Save 12%)
    Ships in 5 days
    Free Shipping Free Shipping
    Turner Motorsport Camber Plate Bushing (Street) - E46 M3

    This is a NEW replacement black polyurethane bushing used in our E46 M3 Front Street Camber Plates. This is a custom-manufactured part for Turner Motorsport, made with our own specifications. Replacement is straight-forward but does require the camber plates to be removed from the car. Price is for each bushing.

    This item fits the following BMWs:
    2001-2006 E46 BMW M3 with Front Turner Street Camber Plate

    Turner Motorsport
    Part #: 017803TMS03A
    Price: $31.46 (USD) 
    $34.95 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    BMW Motorsport Paper Jacket This Tyvek jacket is lightweight, tear resistant, and best of all, ready for autographs from your favorite drivers. It folds up easily for storage. Includes BMW Motorsport letting, a roundel on the sleeve, and motorsport stripes on the back.
    Genuine BMW
    Part #: 8014244641620
    Price: $46.86 (USD) 
    $55 (Sale - Save 15%)
    Ships in 4 days
    BMW Motorsport Puma Drift Cat 5 Driving Shoes These shoes will go with any outfit while subtly displaying your love of BMWs. The heel has a small BMW roundel with BMW Motorsport lettering, while the understated color scheme is as stylish as it is subtle.
    Genuine BMW
    Part #: 8016244650513
    Price: $230.02 (USD) 
    $270 (Sale - Save 15%)
    Ships in 4 days
    BMW Motorsport Jacket This lightweight windbreaker features a drawstring at the waist to keep wind from chilling you to the bone, while its weather-resistant material repels rain. It even includes a built-in headphones pocket. Navy blue and white, this BMW Motorsport jacket features a reflective zipper and motorsport stripes on the back.
    Genuine BMW
    Part #: 801424464415
    Price: $230.02 (USD) 
    $270 (Sale - Save 15%)
    Ships in 4 days
    K&P Engineering High Performance Stainless Steel Micronic Oil Filter - S50 S52 S54

    Stainless steel filtration is not a new technology but is quickly gaining popularity in the automotive segment. With the ability to filter down as small as a paper filter element with the ability to be washed and reused!

    The K&P Engineering filter element is made from medical grade, type 304 stainless steel micronic filter cloth to provide unmatched protection against oil contamination and resultant engine damage. A one inch square of this material flows an incredible 1.9 gallons of oil per minute at only 1 PSI pump pressure. The adhesive used in the filter assembly process is good to 600 degrees Fahrenheit, far above normal engine operating temperatures. A super strength nickel-plated neodymium rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil. The sophisticated bypass is engineered for proper differential pressures and consistent operation, delivering a greater percentage of filtered oil while being very easy to clean. The twist lock design assures positive filter element placement and allows for easy disassembly, inspection, and cleaning. The quad-ring gasket doubles the seal between the filter and the engine. Finally, the filter housing is carved out of solid 6061T6 billet aluminum, which not only looks trick but aids in dissipating heat.

    K&P Engineering manufactures stainless steel filters for a vast array of engines around the world. Staying at the forefront of design and testing allows this company to offer a top-tier product for your European vehicle.

    Features:

    • Consistent filtering across entire filter surface
    • Superior ASTMF316 filtration performance
    • 7 times the flow of comparable paper oil filters
    • Magnetic Prefiltering
    • Progressive rate bypass combined with high flow characteristics of the filter media avoids unfiltered oil bypassing the filter during cold startup and high rpm
    • No more cutting apart messy paper filters for trapped debris inspection
    • Proven in Motorsports, Military and Aerospace applications for years. Technology is FAA approved for use in aircraft. 

    At regular oil changes, clean to K&P's specifications for continued used - a true lifetime filter.

    This product fits the following BMWs:
    1995 - 1999 E36 M3
    2001 - 2006 E46 M3
    1998 - 2002 E36/8 Z3 M Coupe
    1998 - 2002 E36/7 Z3 M Roadster
    2006 - 2008 E86 Z4 M Coupe
    2006 - 2008 E85 Z4 M Roadster

    K&P Engineering
    Part #: S21
    Price: $89.10 (USD) 
    $99.00 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Liqui-Moly Leichtlauf High Tech 5W-40 Engine Oil - 1 Liter

    Leichtlauf High Tech engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo, multi-valve, and supercharger compatibility, and long service life.

    Approved for the following specifications:

    • ACEA A3-08 / B4-08
    • API SN / CF
    • BMW Longlife-01
    • MB-Approval 229.5
    • Porsche A40
    • VAG 502.00 / 505.00

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Liqui-Moly
    Part #: 2331
    Price: $7.37 (USD) 
    $8.19 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Liqui Moly Longtime High Tech 5W-30 Oil Service Kit - M52 M54

    Liqui Moly Oil Service Kits from Turner Motorsport include everything you need to change the oil in your BMW. 

    Includes:

    • 7 Liters of Liqui Moly Longtime High Tech 5w-30 Engine Oil 
    • Oil Filter Kit
    • Drain Plug with Crush Washer

    Longtime High Tech engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo and multi-valve compatibility, and long service life.

    Properties:

    • Smooth engine running characteristics
    • Long engine service life due to exceptional protection against wear
    • Rapid oil delivery at low temperatures
    • Optimum oil pressure at all engine speeds
    • Premium lubrication reliability at high and low temperatures
    • High shear and ageing stability
    • Reduces fuel consumption and pollutant emissions
    • Outstanding engine cleanliness
    • Tested with catalytic converters and performance proven with turbochargers
    • Miscible and compatible with commercially-available engine oils

    Approved for the following specifications:

    • ACEA C3
    • API SN / CF
    • BMW Longlife-04
    • MB-Approval 229.51
    • VAG 502.00 / 505.00

    Recommended for the following specifications:

    • ACEA A3 / B4
    • MB 229.31
    • VAG 505.01

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Packaged by Turner
    Part #: LM0CK6KT
    Price: $61.76 (USD) 
    $66.04 (Sale - Save 6%)
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Liqui Moly Molygen 5w-40 Oil Service Kit - M52 M54

    Liqui Moly Oil Service Kits from Turner Motorsport include everything you need to change the oil in your BMW. 

    Includes:

    7 Liters of Liqui Moly MolyGen 5w-40 Engine Oil
    Liqui Moly UV Flashlight
    Mann Oil Filter Kit
    Febi Oil Drain Plug & Washer

    New generation engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo and multi-valve compatibility, and long service life.

    Properties:

    • Smooth engine running characteristics
    • Long engine service life due to exceptional protection against wear
    • Rapid oil delivery at low temperatures
    • Optimum oil pressure at all engine speeds
    • Premium lubrication reliability at high and low temperatures
    • High shear and ageing stability
    • Reduces fuel consumption and pollutant emissions
    • Outstanding engine cleanliness
    • Tested with catalytic converters and performance proven with turbochargers
    • Miscible and compatible with commercially-available engine oils

    Approved for the following specifications:

    • ACEA C3
    • API SN / CF
    • VAG 502.00 / 505.00
    • BMW Longlife-01

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Packaged by Turner
    Part #: LM0CK27KT
    Price: $62.93 (USD) 
    $74.03 (Sale - Save 15%)
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Liqui Moly Special Tec LL 5W-30 Oil Service Kit - M52 M54

    Liqui Moly Oil Service Kits from Turner Motorsport include everything you need to change the oil in your BMW. 

    Includes:

    • 7 Liters of Liqui Moly Special Tec LL Engine Oil 5w-30
    • Mann Engine Oil Filter
    • Febi Oil Drain Plug & Gasket

    Special Tec LL engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, and long service life.

    Approved for:

    • BMW Longlife-01
    • VW 502 00
    • VW 505 00
    • MB-Freigabe 229.5

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Packaged by Turner
    Part #: LM0CK21KT
    Price: $57.89 (USD) 
    $64.32 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Liqui Moly Longtime High Tech 5w-30 Engine Oil - 1 Liter

    Longtime High Tech engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo and multi-valve compatibility, and long service life.

    Properties:

    • Smooth engine running characteristics
    • Long engine service life due to exceptional protection against wear
    • Rapid oil delivery at low temperatures
    • Optimum oil pressure at all engine speeds
    • Premium lubrication reliability at high and low temperatures
    • High shear and ageing stability
    • Reduces fuel consumption and pollutant emissions
    • Outstanding engine cleanliness
    • Tested with catalytic converters and performance proven with turbochargers
    • Miscible and compatible with commercially-available engine oils

    Approved for the following specifications:

    • ACEA C3
    • API SN / CF
    • BMW Longlife-04
    • MB-Approval 229.51
    • VAG 502.00 / 505.00

    Recommended for the following specifications:

    • ACEA A3 / B4
    • MB 229.31
    • VAG 505.01

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Liqui-Moly
    Part #: LM2038
    Price: $8.06 (USD) 
    $8.95 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    BMW Coolant / Antifreeze, 1 Gallon Jug The use of Original BMW Anti-Freeze/Coolant will ensure sufficient cooling in summer and protection against freeze-ups in winter. BMW Antifreeze/Coolant will also guard your vehicle's various engine components against corrosion.

    BMW Anti-Freeze/ Coolant will prevent excessive silicate gel precipitation, which may cause plugging of the cooling system and lead to more extensive repairs. For proper maintenance we recommend that your BMW's cooling system be drained and refilled every two years with Original BMW Anti-Freeze/Coolant. It was developed to be compatible with BMW's aluminum radiators, and is nitrite- and phosphate-free to prevent excessive silicate build-up.

    Note that most BMW cooling systems take 8+ liters of a 50/50 mix of BMW coolant and distilled water. BMW sells this coolant in 1 gallon jugs (1 gallon = 3.79 liters), so plan accordingly.
    Genuine BMW
    Part #: 82141467704
    Price: $20.89 (USD) 
    $24.50 (Sale - Save 15%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    3MM Silicone Vacuum hose - Black - 9 feet Car suffering from vacuum leaks? This vacuum hose has a 3mm inner diameter. 
    Forge
    Part #: vc03b
    Price: $13.46 (USD) 
    $14.95 (Sale - Save 10%)
    In Stock
    Quantity:   
    4MM Silicone Vacuum Hose - Red - 9 Feet Car suffering from vacuum leaks? This vacuum hose has a 4mm inner diameter. 
    Forge
    Part #: vc04r
    Price: $14.36 (USD) 
    $15.95 (Sale - Save 10%)
    In Stock
    Quantity:   
    3MM Silicone Vacuum Hose - Blue - 9 Feet Car suffering from vacuum leaks? This vacuum hose has a 3mm inner diameter. 
    Forge
    Part #: vc03
    Price: $13.46 (USD) 
    $14.95 (Sale - Save 10%)
    In Stock
    Quantity:   
    Window Regulator - Front Left - E46 323i 325i 325xi 328i 330i 330xi E46 window regulators are a common failure item. We carry the latest updated Genuine BMW window regulator due to the high failure rate of many aftermarket units.

    When replacing the window regulator there are several items you will likely need to replace. The door vapor barrier will likely be damaged during removal. If this is not replaced properly water can leak into the car. Our install kit includes the special butyl sealing tape required for a proper seal. There are also a number of small hardware clips and nuts that are one time use that you will need as well.

    Optional Installation Kit includes:
    51338242760 x 2 - Window Regulator Clips
    07146951627 x 3 - Locking Nuts
    51487114714 - Front Left Vapor Barrier
    Butyl Tape

    This item fits the following BMWs:
    1999-2005 E46 BMW 323i 325i 325xi 328i 330i 330xi - Sedan and Wagon models
    Genuine BMW
    Part #: 51337020659
    Price: $156.97 (USD) 
    $177.87 (Sale - Save 12%)
    In Stock
    Free Shipping Free Shipping
    E46 M3 D-Force LTW5 18x9.5 Square Race Wheel Set These D-Force LTW5 wheels are one of the best track wheels you can use on the E46 M3. This is a special set with 9.5" wheels at all four corners so you can run a wider front tire for more grip. With most track tire options classed as a 275 width tire, a 9.5 or 10.0" wheel is ideal for the E46 M3 (275/30, 275/35, 275/40, etc). Our Grand-Am Cup E46 M3s used 9.5 wheels in front and rear with a 275/35-18 Hoosier. Using a non-staggered wheel set is the first step for any tracked M3. These wheels are light weight but strong, being formed from a special process that makes the alloy stronger and less porous than traditional casting methods. Thousands of the LTW5 wheels have been sold with zero complaints about strength, making these an unbeatable track wheel option. They're even easy to clean! While running a square setup will help reduce understeer, there are other factors to consider as well in fine-tuning the handling to reduce understeer and create a more neutral car.

    Wheel Specs:
    Front: 18x9.5 / ET 35 offset / 18.5lbs
    Rear: 18x9.5 / ET 35 offset (requires 10mm spacer) / 18.5lbs
    When installing, ensure the spacer fits flush against the surface of the brake rotor hub. Minor trimming of the hub lip may be required for a completely flush fit.

    For more information on BMW wheels and wheel info in general, check out our Wheel Fitment Guide by clicking here.

    This wheel set is intended for the following BMWs:
    2001-2006 E46 BMW M3
    D-Force Wheels
    Part #: E46-M3-LTW5-95S
    Price: $1248.68 (USD) 
    $1260.72 (Sale - Save 0%)
    Direct Ship
    Head Gasket Set - E39, E46, E53 X5, E60, E83 X3, Z3, Z4 - M54 6 Cyl This set of top-end gaskets is a both a time and money saver. It includes all of the commonly replaced gaskets, seals, and o-rings when pulling the cylinder head for overhaul. Having these on hand instead of chasing them down at the last minute will save you time, money, and frustration. With the head off the car you're going to want or need to replace these items anyway to ensure it's free of fluid and vacuum leaks. This is especially important because the newer BMW models have very strict emissions controls and vacuum and oil leaks can create turmoil in the system. Even if you're not pulling the head this set includes so many valuable parts you'll want to keep this on hand to use for spares.

    Note: because of rebuild options, the head gasket is not included in this set. Add one from the options below.

    Complete Parts List
    (click to expand)
    BMW p/nQtyDescription
    071199630731screw plug seal ring
    071199631301plug gasket ring
    071199634181timing chain tensioner seal ring
    111200304961valve cover gasket set
    111275264471oil fill cap seal ring
    113490644572valve stem seal,
    2 sets = 24 valves
    113614335132VAN0S plug
    113614338171VAN0S cover profile gasket
    113617037132VAN0S solenoid o-ring
    115314358081coolant pipe o-ring
    115375093571thermostat housing profile gasket
    116114366311intake manifold runner profile gaskets
    116114374531idle control valve o-ring
    117275052591air pump valve profile gasket
    121417483982camshaft position sensor o-ring
    135475047281profile gasket
    135475047291profile gasket
    136217432991o-ring
    136414374866fuel injector o-ring
    136414374876fuel injector o-ring
    181075023462exhaust manifold flange gasket
    324110935962VAN0S oil line seal ring
    116217329692exhaust manifold heat shield


    This item fits the following BMWs:
    2003-2006 E46 BMW 325i 325ci 325xi 330i 330ci 330xi
    9/2002-on E39 BMW 525i 530i
    2004-2005 E60 BMW 525i 530i
    2004-2006 E83 BMW X3 2.5i X3 3.0i
    2003-2006 E53 BMW X5 3.0i
    9/2002-on Z3 BMW Z3 2.5i Z3 3.0i
    2003-2006 E85 BMW Z4 2.5i Z4 3.0i
    Genuine BMW
    Part #: 11120141055
    Price: $380.69 (USD) 
    $434.53 (Sale - Save 12%)
    Ships in 5 days
    Free Shipping Free Shipping
    Front Cup Holder - E46 3 Series These are the replacement factory center console front cupholders.
    Choose from the following colors:
    Part# 51168217953 - Black
    Part# 51168217955 - Beige
    Part# 51168248504 - Grey


    This item fits the following BMWs:
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    Genuine BMW
    Part #: 51168217953X
    Price: $32.62 (USD) 
    $40 (Sale - Save 18%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Genuine BMW All Weather Rubber Floor Mats - E46 3 series Protect your interior from mud, snow, salt and water with these heavy duty rubber floor mats. These Genuine BMW E46 3 Series rubber floor mats have deep channels designed to trap sand, snow, mud and winter debris to keep your factory carpeting nice and clean. Please choose your color below to match your interior. Fits Left Hand Drive models only.

    Note: BMW changes floor mat designs and suppliers frequently. Actual product may differ from photo but the product you receive is the latest style and type from BMW.

    This item fits the following BMWs:
    1999-2005 E46 Sedan BMW 323i 325i 328i 330i - sorry not for Xi models
    2000-2006 E46 Coupe BMW 323ci 325ci 328ci 330ci M3
    Genuine BMW
    Part #: 8255015119X
    Price: $78.22 (USD) 
    $90 (Sale - Save 13%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    E36, E46, E82, E9X, Z3, Z4 D-Force LTW5 17x9.0 Square Race Wheel Set Looking for a tried and true square wheel setup for your E36 or E46 track car or Spec E46 (SE46) racecar? These LTW5 alloy wheels have proven themselves again and again, year after year, as one of the best track wheels on the BMW market.

    They tick all of the right boxes in wheel design -
    • light weight - 17lbs
    • strong - built from a new proprietary semi-forged method
    • inexpensive - under $300 apiece
    • correct offset for the sizing - spacers are not usually required
    • lots of caliper clearance for big brakes

    These wheels have been a favorite of Turner customers and our Turner project cars for years. When we want to build an E36 M3 track car, we go with these. There's never been a better inexpensive track wheel.

    The LTW5 are built using a new flow-forming casting process that results in a denser concentration of aluminum alloy in the casting. It's a semi-forged wheel at a fraction of the cost of a true forged wheel. This keeps it as one of the strongest wheels out there but with light weight. D-Force started out designing wheels only for BMWs so the fitment and design is second to none. These wheels were built for an excellent fit within the E36 and E46 bodywork and for clearance to the most common types of struts and coil overs. The spoke design and backspacing is also very generous for big brake kits and caliper upgrades which means you may not need spacers.

    Wheel Specs:
    Front: 17x9.0 / ET 41 offset / 16.6lbs. Recommended tire size: 245-255Rear: 17x9.0 / ET 41 offset / 16.6lbs. Recommended tire size: 245-255

    Fitment note: this is a very aggressive wheel for these applications. This wheel package is only intended for track or racecars that run very wide tires. Because of the widths and offsets involved, some tire contact and rubbing may occur on a suspension component or bodywork. We cannot guarantee fitment with all applications. Bodywork rubbing may have to be corrected with fender rolling, steering rack stops, or even a small spacer. Suspension contact will need to be corrected with spacers or alternative suspension components. If tire contact does concern you then we suggest using a narrower 8.5" wheel.

    For more information on BMW wheels and wheel info in general, check out our Wheel Fitment Guide by clicking here.

    This wheel set is intended for the following BMWs:
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
    2008-2012 E82 BMW 128i 135i
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
    2007-2013 E93 BMW 328i 335i - Convertible
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
    D-Force Wheels
    Part #: TMS14411
    Price: $1126.28 (USD) 
    $1138.32 (Sale - Save 1%)
    Direct Ship
    Complete Cooling System Overhaul Package - 1999-2006 E46 323i 325i 328i 330i This is a compete cooling system overhaul kit, which includes all the common E46 cooling system failure parts bundled into a complete package. This cooling system package is for all of the non-M E46 3 series -- those made in 1999-2005 as well as 2006 coupes and convertibles.

    The E46 cooling system is much like that of the previous generation 3 series. Several of the primary cooling components are prone to failure within 60k miles (or less in many cases). A failure in the cooling system can lead to overheating and catastrophic engine failure. Don't gamble your engine! By replacing these core items preventatively, such as the radiator & waterpump, you are defusing what could be a ticking cooling system time bomb. And if you've had a failure of one of these parts, now is the time to refresh your cooling system. Our kit includes one OEM Behr radiator, an Original BMW water pump (with updated composite impeller), thermostat (complete with housing), radiator cap, and new hoses (as pictured).

    Optional items (which can be added below):
    - Original BMW antifreeze
    - Upgrade the water pump to a Stewart EMP High Performance pump
    - Add a new coolant expansion tank (known for cracking)
    - Add a new coolant level sensor (known for failing / throwing "check coolant" messages)

    This cooling system overhaul kit fits the following BMWs:
    1999-2000 E46 3 Series Sedan/Wagon - 323i & 328i
    1999-2000 E46 3 Series Coupe/Convertible - 323Ci & 328Ci
    2001-2005 E46 3 Series Sedan/Wagon - 325i, 325xi, 330i, 330xi
    2001-2006 E46 3 Series Coupe/Convertible - 325Ci, 330Ci
    Packaged by Turner
    Part #: E46COOLINGPACK
    Price: $401.23 (USD) 
    $423.57 (Sale - Save 5%)
    Direct Ship
    Free Shipping Free Shipping
    Side Mounts - Motion Motorsport Slotted Motion Motorsport takes the struggle out of centering your race seat with their exclusive SLOTTED side bracket mounts. These side mounts bolt to your seat shell just like any other side mount. But the bottom bolts to your sliders or floor mount through their innovative slotted inserts. There's no more re-drilling or hogging out holes to get everything to line up. Loosely install the brackets, center your seat, then tighten the screws on the brackets. You won't have to pull the seat in and out while you make tiny adjustments. The rotating slotted design allows the brackets to 'float' into the position you want. And once tightened they will not move or come out of position. These brackets have been thoroughly tested with all FIA-spec seats for bolt spacing, most common seat sliders, and compatible with matrix-style and other floor mount designs. The aluminum material meets or exceeds all FIA recommendations and are powdercoated in matte black.

    One other trick feature is the driver and passenger specific offsets to the brackets. The bends are made to place the seat as close to the transmission tunnel as possible (also dependent on floor mount design). Most other side mounts are universal and actually the same piece flipped around with the proper holes drilled. But this does not offset the seat at all and you can end up with an annoying offset from the center of the seat to the steering wheel. Choose from a driver's or passenger's side bracket set below.

    Price is for one pair of side mounts.
    Motion Motorsport
    Part #: MM-SIDE-
    Price: $99.99 (USD) 
    $129.95 (Sale - Save 23%)
    In Stock
    Free Shipping Free Shipping
    Turner Motorsport Mens Championship T-Shirt Celebrate our championship victories from the past several years including our most recent 2011 GS Championship. These t-shirts are official Turner wear, as seen worn by employees and our championship winning race team personnel. Turner Motorsport logo on the front with images of the various championship winning cars on the back.

    Also available in Long Sleeve
    Turner Motorsport
    Part #: 920-2014-x
    Price: $12.85 (USD) 
    $14.99 (Sale - Save 14%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Genuine BMW Short Sleeve Polo Shirt Classic-fit polo has 2-button placket, tonal detail on collar and BMW logo on front left chest. Features moisture-management fabric and double-needle top stitching for durability. 65% cotton, 35% polyester. Imported.
    Genuine BMW
    Part #: TMS338532
    Price: $40.04 (USD) 
    $47 (Sale - Save 15%)
    Ships in 4 days
    Manual BMW Shift Knob - Anatomic This Genuine BMW manual shift knob fits all 1982 and on BMWs. It "snaps" onto your shifter level just as your stock shift knob does, and can be installed in a matter of seconds. Features an anatomic shape for comfortable grip wrapped in black leather with choice of 2 shift emblems. (Sorry, there's no 6 speed option on this knob. For 6 speed cars, we recommend using the ZHP style shift knob, which is available both 5 and 6 speed patterns.)

    Fits ALL manual transmission BMWs from 1982 through present.

    Please choose your desired shift emblem below.
    Genuine BMW
    Part #: 25111221284
    Price: $72.74 (USD) 
    $84.5 (Sale - Save 14%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Crankcase Oil Separator Repair Kit - E46 E39 X5 This Crankcase Vent / Oil Separator Repair Kit includes the updated oil separator valve and hoses. This kit fits E46 323i 323ci 325i (M54 engine) 325ci (M54 engine) 325xi 328i 328ci 330i 330ci 330xi. E39 525i 530i. X5 3.0i.

    We also recommend that you replace the oil dipstick guide tube and the hose from the oil separator to the oil dipstick tube as they are often plugged beyond repair.

    This item fits the following BMWs:
    1999-2005 E46 BMW 323i 323ci 328i 328ci 330i 330ci 330xi
    1999-2005 E46 BMW 325i 325ci 325xi - M54 engine only
    2001-2003 E39 BMW 525i 530i
    2000-2006 E53 BMW X5 3.0i
    Packaged by Turner
    Part #: 11617534237
    Price: $83.91 (USD) 
    $89.12 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    E46 M3, MZ3 S54 Bosch Motorsport Stand Alone ECU System

    Stand Alone Control and Direct Plug-In with Effortless Power Gains!!!

    Instant Power!
    (max gains over stock)

    Bosch ECU swap (no other changes)+24hp+16ft-lbs

    Bosch ECU with headers+56hp+34ft-lbs

    Bosch ECU with headers and cams+76hp+50ft-lbs

    Bosch ECU with 3.5L stroker kit
    (gains over existing stroker tune)+33hp+18ft-lbs

    Bosch ECU with supercharger kit
    (gains over existing s/c tune)+48hp+23ft-lbs

     

    Everyone at the track will agree that stand alone ECUs give the most control and the best access for tuning. The obstacle with stand alones has traditionally been the cost and time. Bosch Motorsport and Turner Motorsport have teamed up to offer an affordable, plug-and-play, and fully tunable stand alone ECU system for the E46 M3. The Bosch Motorsport ECU opens the doors for unlimited tuning potential and instant power and reliability benefits over the stock BMW MSS54 ECU. The Bosch Motorsport plug-n-play ECU cuts through all of the hassle and additional work that normally comes with switching to a stand alone management system. It also leapfrogs the factory system in advanced tuning and reliability. This is a must-have system for owners of E46 M3 race and track cars. Pound for pound the factory ECU just doesn't stack up.

    The advantages of the Bosch Motorsport system are ENORMOUS:
    + immediate power and torque gains
    + all-in-one system with direct plug-in to existing wiring and dash cluster
    + full access and control over engine mapping
    + low cost compared to other engine management systems
    + no interference or limp modes like the factory ECU
    + base map file included (the Bosch ECU holds 3)
    + access to upgrade-specific map files and updates

    The factory MSS54 ECU is a compromise on multiple levels. It's purpose is NOT to make large amounts of horsepower or allow access to its internal code for changes. There have been great breakthroughs in reverse engineering the stock ECU but the fact remains it was never intended to be a true race ECU. The factory ECU and oxygen sensors are there for controlling emissions and fuel economy. The emphasis is on control - it is in BMW's best interest to lock out changes to the ECU so that the car conforms to emissions and fuel economy standards. While mild tuning for the street is not a problem (such as with our Shark Injector software), the factory ECU will fight major changes every step of the way.

    Our partnership with Bosch Motorsport goes back a long time. When we switched from a full stand alone to the Bosch ECU on our E46 M3 racecars we instantly made more power. When we realized there was a need for a plug-and-play alternative to the stock E46 M3 ECU the Bosch MS4.0 ECU was the first to come to mind. Stand-alone race ECU systems are ideal for making large amounts of reliable power but until now they were too expensive and too complicated. A full stand lone system will cost tens of thousands of dollars and require hours of installation and fabrication work for the sensors, wiring harnesses, communications platforms, and more. Our Bosch Motorsport system gives you all of the control of a stand-alone but works with the existing wiring and sensors in the E46 M3, including the instrument cluster and dash! This is thanks to the special translator interface box that we developed and allows the Bosch ECU to communicate with the stock VAN0S, drive-by-wire, cooling and oil systems, ABS, and more. The Bosch ECU works with the more advanced Bosch LSU4.9 wideband oxygen sensors which replace the two stock pre-cat O2 sensors. We strongly recommend that you replace your spark plugs and ignition coils with the latest BMW part numbers before installing this system. You can be up and running with the complete Bosch system in about an hour! Yes, one hour! Plug in the ECU and translator box and swap the front O2 sensors and you're done. You can revert back to stock just as easily. To get reliable power means removing interference from emissions equipment or OBD oversight and eliminate the possibility of a race-ending limp mode or fault code. The Bosch ECU system eliminates layers of complexity to give you what you really want: power and control.

    Our Bosch ECU system comes pre-installed with a base engine map that closely matches your existing engine spec. We developed multiple tuning maps on our Dynapack chassis dyno using popular bolt-on S54 power upgrades: headers, intakes, cams, superchargers, etc. Straight away our base tune gained 24hp. With headers and cat delete, over 50! Our base supercharger file gained almost 50hp more than the tune that came with the kit! A 3.5L stroker engine gained over 30hp from the best file supplied by the engine builder! We provide you with a base map closely matched with your existing modifications. You then have the ability, if needed, to make adjustments to optimize the output using the Bosch PC software. Unlike the factory ECU there is no limit to the number of flashes you can make on the Bosch ECU.

    Have any questions or need additional info? Give us a call or drop an e-mail. Talk it over with your shop or tuner. Or have your shop or engine builder give us a call! If they are serious about tuning then they know the limitations of the stock ECU and the advantages of a stand-alone like our system. Many race shops around the US and Europe already have extensive experience with the Bosch Motorsport equipment but our's was the first time the system has been engineered to work with a stock E46 M3 harness. Dealer inquiries invited!

    Bosch Motorsport E46 M3 ECU System includes:
    - Bosch Motorsport MS4.0 ECU
    - E46 M3-specific Translator Box
    - Bosch Motorsport LSU4.9 wideband Lambda sensors (x 2)
    - Turner Motorsport base software tuning file

    Optional items:
    Expansion Harness - for data logging and aux port

    For a lot more in-depth information on our Bosch standalone ECU system, including dyno examples of our work, click to our detailed tech page.

    This item fits the following BMWs:
    2001-2006 E46 BMW M3 6MT manual transmission only
    2001-2002 Z3 BMW Z3 M Roadster M Coupe (S54)

    Bosch
    Part #: TMS180919
    Price: $5498.95 (USD) 
    $6994 (Sale - Save 21%)
    Ships on Jul 13, 2018
    E46 M3 Shark Injector Performance Software

    Benefits of Shark Injector Performance Software:

    • Horsepower and torque gains
    • Faster and smoother throttle response
    • Top speed limiter removed
    • Optional convenience features
    • Extremely easy to install/uninstall
    • Reversible and reusable

    Performance software is a must-have upgrade on your E46 M3 and you won't find an easier and better software solution than the Shark Injector. Developed by BMW tuning expert Jim Conforti, this device plugs into the car's diagnostic port and flashes new performance files into your car's engine computer (ECU). There's no removal of the ECU and shipping, no cables, no laptop required - only a battery charger! Installation takes just a few minutes and your engine will perform like never before!

    The M3 performance software was developed on the dyno to create maximum power and torque using premium 91+ octane fuel and revising the torque limiters in the ECU. The software makes changes to the ECU's maps and algorithms for fuel injection, ignition timing, VANOS and camshaft movement, and transitional fueling. We modify the maps for part throttle and full throttle so you get better response and more torque at all RPM. The rev limit is raised to 8,100 RPM rev limit and the top speed limiter is removed. By fine tuning these maps we've been able to improve the S54 engine beyond what BMW did by making more power and torque and a smoother-running engine.

    The Shark Injector plugs into the diagnostic port inside the E46 cabin. With the battery charger supplying power, press the Upgrade button and within minutes the ECU is reflashed with the new performance tune. No other software product on the market comes close to how easy it is to install. You can use the Restore button to re-install the stock BMW software at any time. Detailed instructions are included. Other tuners require you to remove the ECU and ship it to them or use a laptop to read and write a new file. The Shark Injector is ready to install right out of the box! A planned future upgrade will allow you to use the USB port to load different performance files.

    Looking to maximize your power gains? Add a Turner IAT Relocation to combat power-robbing heat soak - the only true plug-and-play solution available. Heat soak is a real plague on consistent power for a stock or tuned vehicle. Click here to read more about our IAT relocation kit.


    E46 M3 Dyno
    Power and Torque Gains
    Stock: 278.2 whp / 235.3 wtrq
    Sharked: 284.2 whp / 236.9 wtrq
    Peak Gain 6.0 rear wheel HP and 1.6 rear wheel Torque
    (note: the max gain (biggest improvement) is 9 rear wheel HP between 7000 and 8000 rpm)

    Shark Injector Installation Instructions
    (click to expand)
    Shark Injector FAQ
    (click to expand)

    This item fits the following BMWs:
    2001-2006 E46 BMW M3 (US models only)
     

    Shark Injector
    Part #: TMS3967
    Price: $314.10 (USD) 
    $349 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    E46 M3 D-Force LTW5 18-inch Staggered Wheel Set Looking for an 'aggressive' wheel setup for your E46 M3 but don't want to have to worry about rubbing or clearance problems? This set of staggered D-Force LTW5 wheels for the E46 M3 uses a very aggressive 9.0" front wheel and a standard sized 9.5" rear wheel. There is a lot of room in the front to run a bigger wheel and the 9.0 fits nicely without being too wide. And with the wider front wheel you can use a meatier front tire for more grip without having to jump all the way up to a square race setup. Here are the critical wheel specs:

    Front: 18x9.0 / ET 41 / 18lbs. This aggressive offset will push the wheel out by 19mm (.75") compared to the factory 8.0" wheel. That's like putting a 20mm spacer on your stock wheel but also gaining a full inch of wheel width. We recommend a 255-265 tire size on this wheel.
    Rear: 18x9.5 / ET 25 with a 10mm spacer / 18.5lbs. This is the stock width because the M3 9.5 is already very wide for this car. We recommend a 265-275mm width tire. The LTW5 wheel comes as a 35mm offset and we add a 10mm spacer to bring it back to the correct, factory position. Longer black wheel bolts are included with this package. With the 10mm spacers, minor trimming of the car's hub lip may be required for a flush fit.

    These new wheels are among the strongest and lightest we have ever offered. And they are excellent quality with years of proven satisfaction from street warriors to track junkies alike. These wheels are cast using a new flow-forming method that keeps the weight low and strength high compared with traditional cast wheels. This process results in a 'semi-forged' wheel at a fraction of the cost of a fully forged wheel.

    For more information on BMW wheels and wheel info in general, check out our Wheel Fitment Guide by clicking here.

    This wheel package is intendted for the following BMWs:
    2001-2006 E46 BMW M3
    D-Force Wheels
    Part #: TMS14400
    Price: $1325.73 (USD) 
    $1337.77 (Sale - Save 0%)
    Direct Ship
    Upper Spring Hats/Perches (Pair) - 2.5 Inch / 16mm Pin / Square Seat Made in the USA These aluminum upper spring hats are for coil over struts with a 2.5" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

    Spring I.D.Strut Pin Diam.Strut Pin Seat
    2.5"16mmsquare

    Turner Motorsport
    Part #: TSU998064C
    Price: $35.01 (USD) 
    $59.95 (Sale - Save 42%)
    $59.95
    Limited Qty Sale
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Upper Spring Hats/Perches (Pair) - 60mm / 16mm Pin / Tapered Seat Made in the USA These aluminum upper spring hats are for coil over struts with a 60mm coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

    Spring I.D.Strut Pin Diam.Strut Pin Seat
    60mm16mmtapered

    Turner Motorsport
    Part #: TSU9980559
    Price: $35.00 (USD) 
    $59.95 (Sale - Save 42%)
    $59.95
    Limited Qty Sale
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Upper Spring Hats/Perches (Pair) - 2.25 Inch / 14mm Pin / Square Seat
    Made in the USA These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

    Spring I.D.Strut Pin Diam.Strut Pin Seat
    2.25"14mmsquare

    Turner Motorsport
    Part #: TSU9980225
    Price: $67.96 (USD) 
    $79.95 (Sale - Save 15%)
    Ships on Sep 24, 2018
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Turner Plug-and-Play IAT Relocation Kit

    All vehicles will lose some degree of performance due to heat soak under the right operating conditions.  Engine management systems constantly monitor operating conditions and modifying parameters based on sensor inputs. BMW integrated the intake air temp sensor in the MAF housing on models such as the E39 M5, and, being sandwiched behind a hot radiator and in some applications next to an even hotter valve cover, this is less than ideal for performance applications. Absorbing excess heat from its surroundings, the MAF can’t shed it fast enough, and the ECU reads an inaccurately high intake air temperature. Compensating for this false hot air measurement, the ECU pulls timing and runs a richer fuel mixture, resulting in a significant loss of torque.

    What can you do?  Locate an intake air temp sensor in a location where it can properly measure incoming air temps and where it's less prone to heat soak. Mounting the sensor further away from the heat source and isolating it from the MAF housing, it can both resist the effects of heat soak longer and respond to temperature changes more quickly.  The result is you’ll experience reduced torque loss and more consistent power output when you’re pushing your engine hard. 

    The Turner engineering team was initially skeptical of the claimed performance benefits of this modification. They first set out validate the functionality and performance benefit of a temp sensor relocation. Replicating stop-and-go traffic heat soak in a 2001 540i was a simple task in a controlled environment - their dynometer. First the car was heat soaked to simulate being stuck in traffic or moving at low speeds by running the car four times on the dyno with the dyno's cooling fans disabled. The fans were then turned on for three more runs to observe the recovery rate once air flow was reintroduced. The test: following this procedure once with a stock IAT, and once with their relocation kit in place. 

    The result? Turner recovered 11lb-ft torque at 2500rpm through use of their relocation kit, with even greater recovery to be found for M5 owners. Here are the heat soak-related torque losses Turner experienced:

    Stock IAT location:
    18rwtq at 2500rpm
    10rwtq at 3000rpm
    9rwtq at 3700rpm

    Turner IAT Relocation:
    7rwtq at 2500rpm
    5rwtq at 3000rpm
    5rwtq at 3700rpm

    **Click here for installation instructions**

    The Turner engineering team designed a complete plug and play kit (unlike all other options on the market) that makes for quick, easy, and reversible installation. Weather-sealed connectors keep out the elements, while sheathed wiring offers a clean appearance underhood. With a harness nearly 3 feet long - the Turner IAT relocation kit offers flexibility in positioning, but not too long that you're left with unsightly excess wiring. Turner recommends positioning the sensor in a location away from engine heat, but still within the intake ducting to achieve accurate intake temp readings - such as the far side of the base of the airbox. Vehicles with cold air intakes with cone-style filters can even position the sensor in the end of the filter. Simply drill a hole in your (cool) location of choice and plug in the harness. More information including installation instructions and some good examples of sensor mounting locations can be found in our DIY PDF. 

    We include everything you need to relocate your IAT, just select your desired sensor brand below - Genuine BMW or original equipment Beru.

    Also the perfect plug-n-play option for anyone looking to upgrade their intake to utilize an Alpha-N tune!

    Note for vehicles with M62 engine: applicable to 1999 and up

    Turner Motorsport
    Part #: 014579TMS
    Price: $132.70 (USD) 
    $139.45 (Sale - Save 5%)
    In Stock
    Free Shipping Free Shipping
    E46 M3 Power Package - Shark Injector, Power Pulleys, & IAT Relocation Kit

    Shark Injector Performance Software
    The enthusiast's choice for over a decade, the Shark Injector's performance is only equaled by its own ease of install! Tune your ECU at the press of a button simply by plugging into the under-dash OBDII diagnostic port, there is no removal of your car's computer; no laptop or cables required. What does the Shark offer?

    • Unlock torque and horsepower
    • Smoother engine with less hesitation
    • Improved throttle response
    • Rev limit increased to 8100 or 8600
    • Top speed limiter removed
    • Installs in minutes!
    • Advanced features optional - DSC button controls Sport mode (only one button to push) or Sport mode memory (car remembers you Sport mode preference even after shutting the car off).

    Turner Motorsport Power Pulleys 
    Underdrive Power Pulleys work to 'free up' horsepower. Any accessory that spins from the main drive belt is using up power. That's power that could otherwise be used to move the car. By giving some of that power back to the engine, you can make the car faster! We measured 10.7 whp at 6960 rpm and 8.1 lb-ft of torque at 5550 on a 1995 M3. Race pulleys deliver even more power. 

    Another "no-downside" upgrade, we even include a new belt. Total install time for a 3-piece pulley set should be around 1.5 hours. We offer three options in pulleys:
    1.) No alternator pulley included - for cars with big amps and powerful stereo systems that need the extra juice.
    2.) Street Power Pulleys - our most popular option with no downside!
    3.) Race Power Pulleys - delivering 15 "free" horsepower, this set underdrives the water pump, power steering pulley, and alternator for lower temps, less wear, and more power. Not for street use. 


    Intake Air Temperature Relocation Kit
    Looking to maximize your power gains? Add a Turner IAT Relocation to combat power-robbing heat soak - the only true plug-and-play solution available. Heat soak is a real plague on consistent power for a stock or tuned vehicle. Click here to read more about our IAT relocation kit.

    This item fits the following BMWs:
    2001-2006 E46 BMW M3

    Packaged by Turner
    Part #: E46S54SIPULLEY
    Price: $684.00 (USD) 
    $718.9 (Sale - Save 5%)
    Ships on Jun 29, 2018
    Free Shipping Free Shipping
    S54 Power Pack Everything you need to begin making your E46 M3 the track monster of your dreams. The S54 Power Pack is our curated list of bolt-on upgrades that will unleash the true potential of your motor. 
    Turner Motorsport
    Part #: S54-PPK-1
    Price: $803.95 (USD) 
    $838.85 (Sale - Save 4%)
    Ships on Jun 29, 2018
    Free Shipping Free Shipping
    Liqui Moly MolyGen 5w-40 Oil Service Kit - M52 M54

    Liqui Moly Oil Service Kits from Turner Motorsport include everything you need to change the oil in your BMW. 

    Includes:

    7 Liters of Liqui Moly MolyGen 5w-40 Engine Oil
    Liqui Moly UV Flashlight
    Mann Oil Filter Kit
    Febi Oil Drain Plug & Washer

    New generation engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo and multi-valve compatibility, and long service life.

    Properties:

    • Smooth engine running characteristics
    • Long engine service life due to exceptional protection against wear
    • Rapid oil delivery at low temperatures
    • Optimum oil pressure at all engine speeds
    • Premium lubrication reliability at high and low temperatures
    • High shear and ageing stability
    • Reduces fuel consumption and pollutant emissions
    • Outstanding engine cleanliness
    • Tested with catalytic converters and performance proven with turbochargers
    • Miscible and compatible with commercially-available engine oils

    Approved for the following specifications:

    • ACEA C3
    • API SN / CF
    • VAG 502.00 / 505.00
    • BMW Longlife-01

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Packaged by Turner
    Part #: LM0CK15KT
    Price: $62.93 (USD) 
    $74.03 (Sale - Save 15%)
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Mahle OEM Oil Filter for E46 M3, MZ3, MZ4 (S54 Engines) This is the replacement OEM oil filter kit for the S54 engine, as used in the E46 M3, Z4 M Roadster and M Coupe, as well as the 2001-2002 MZ3 M Roadster/Coupe (with S54 engine). This is the complete oil filter kit - filter, large o-ring for filter housing cover, small o-ring for bolt seal, flat washer for bolt, and copper seal ring for the drain bolt. It's everything you would need to complete an oil change - minus the Castrol 10W60 oil of course, which we sell at a great price. This kit is manufactured by Mahle - the original supplier to BMW for the 11427833769 BMW filter (factory filters come with the Mahle part number OX 187 printed on the cap).

    Why Mahle over Mann? In the past we have sold a few different oil filters for the E46 M3 and S54 engines. But Mahle is the true OEM supplier for this part number. It fits perfectly and is the exact replacement part at nearly the same price as the slightly different Mann filter (and less than the factory BMW filter). For more detail, click here.

    This filter fits the following BMWs:
    2001-2006 E46 M3
    2001-2002 MZ3 - M Roadster & M Coupe (S54)
    2006-2008 MZ4 - M Roadster & M Coupe
    Mahle
    Part #: 11427833769ML
    Price: $8.96 (USD) 
    $9.95 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Synthoil Premium 5w-40 Engine Oil - 5 Liter

    Synthoil Premium engine oil is designed to provide the highest amount of engine wear protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo, multi-valve, and supercharger compatibility, and long service life.

    Approved for the following specifications:

    • ACEA A3-04 / B4-04
    • API SM / CF

    Recommended for the following specifications:

    • BMW Longlife-98
    • MB 229.3
    • Porsche A40
    • VAG 502.00 / 505.00

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Liqui-Moly
    Part #: 2041
    Price: $30.55 (USD) 
    $33.95 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Synthoil Premium 5w-40 Engine Oil - 1 Liter

    Synthoil Premium engine oil is designed to provide the highest amount of engine wear protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo, multi-valve, and supercharger compatibility, and long service life.

    Approved for the following specifications:

    • ACEA A3-04 / B4-04
    • API SM / CF

    Recommended for the following specifications:

    • BMW Longlife-98
    • MB 229.3
    • Porsche A40
    • VAG 502.00 / 505.00

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Liqui-Moly
    Part #: 2040
    Price: $7.01 (USD) 
    $7.79 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Liqui Moly Longtime High Tech 5w-30 Engine Oil - 5 Liter

    Longtime High Tech engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth running gasoline and diesel engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, turbo and multi-valve compatibility, and long service life.

    Properties:

    • Smooth engine running characteristics
    • Long engine service life due to exceptional protection against wear
    • Rapid oil delivery at low temperatures
    • Optimum oil pressure at all engine speeds
    • Premium lubrication reliability at high and low temperatures
    • High shear and ageing stability
    • Reduces fuel consumption and pollutant emissions
    • Outstanding engine cleanliness
    • Tested with catalytic converters and performance proven with turbochargers
    • Miscible and compatible with commercially-available engine oils

    Approved for the following specifications:

    • ACEA C3
    • API SN / CF
    • BMW Longlife-04
    • MB-Approval 229.51
    • VAG 502.00 / 505.00

    Recommended for the following specifications:

    • ACEA A3 / B4
    • MB 229.31
    • VAG 505.01

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Liqui-Moly
    Part #: LM2039
    Price: $34.16 (USD) 
    $37.95 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    K&P Engineering High Performance Stainless Steel Micronic Oil Filter - M50 M52 M54

    Stainless steel filtration is not a new technology but is quickly gaining popularity in the automotive segment. With the ability to filter down as small as a paper filter element with the ability to be washed and reused!

    The K&P Engineering filter element is made from medical grade, type 304 stainless steel micronic filter cloth to provide unmatched protection against oil contamination and resultant engine damage. A one inch square of this material flows an incredible 1.9 gallons of oil per minute at only 1 PSI pump pressure. The adhesive used in the filter assembly process is good to 600 degrees Fahrenheit, far above normal engine operating temperatures. A super strength nickel-plated neodymium rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil. The sophisticated bypass is engineered for proper differential pressures and consistent operation, delivering a greater percentage of filtered oil while being very easy to clean. The twist lock design assures positive filter element placement and allows for easy disassembly, inspection, and cleaning. The quad-ring gasket doubles the seal between the filter and the engine. Finally, the filter housing is carved out of solid 6061T6 billet aluminum, which not only looks trick but aids in dissipating heat.

    K&P Engineering manufactures stainless steel filters for a vast array of engines around the world. Staying at the forefront of design and testing allows this company to offer a top-tier product for your European vehicle.

    Features:

    • Consistent filtering across entire filter surface
    • Superior ASTMF316 filtration performance
    • Magnetic Prefiltering
    • Progressive rate bypass combined with high flow characteristics of the filter media avoids unfiltered oil bypassing the filter during cold startup and high rpm
    • Easy inspection of engine contamination
    • Proven in Motorsports, Military and Aerospace applications for years. Technology is FAA approved for use in aircraft. 

    At regular oil changes, clean to K&P's specifications for continued used - a true lifetime filter.

    This part fits the following BMWs:
    1991 - 1999 E36 Coupe 323i 325is 328i
    1993 - 1999 E36 Convertible 323i 325i 328i
    1990 - 1999 E36 Sedan 325i 328i 
    1989 - 1995 E34 525i, 530i, 
    1998 - 2004 E39 Touring 525i 528i 
    1996 - 2004 E39 Sedan 525i 528i 530i 
    1999 - 2001 E46 Convertible 323ci 325ci 330ci
    2002-2006 E46 Convertible 325ci 330ci
    1998 - 2001 E46 323ci 325ci 330ci M3
    2002 - 2006 E46 325ci 330ci
    1998 - 2001 E46 Touring 323i 325i
    2002 - 2006 E46 Touring 325i 325xi
    1998 - 2001 E46 Sedan 323i 325i 328i 330i
    2002 - 2006 E46 Sedan 325i 325xi 330i 330xi
    2000 - 2006 E53 X5 SUV X5 X5 3.0i 

     

     

     

    K&P Engineering
    Part #: S37
    Price: $89.10 (USD) 
    $99.00 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    BMW Motorsport Hoodie Stay warm when the weather gets rough with this BMW Motorsport hooded sweatshirt. It's plenty comfortable, with thumb holes and concealed side pockets. The hood itself features a tri-color ///M stripe, while a rubberized BMW Rounded resides on the left sleeve.
    Genuine BMW
    Part #: 8014244643640
    Price: $151.64 (USD) 
    $178 (Sale - Save 15%)
    Ships in 4 days
    Liqui Moly Voll-Synthese Energy 0w-40 Engine Oil - 1 Liter

    Liqui-Moly's Voll-Synthese Energy engine oil is specifically formulated for optimum oil penetration speed, deposit prevention, and resistance to aging. These factors allow for exceptional gasoline or diesel engine cleanliness, keeping the surfaces of the engine and engine components free from carbon and sludge deposits. This allows the oil to form a stronger film that in turn helps prevent wear much more efficiently than many standard oils. This also allows for easy, smooth engine operation that results in better responsiveness and less total fuel consumption.

    Meets the following requirements;

    • ACEA A3-98/B3-98
    • API SJ-CF
    • BMW [Longlife] LL-98
    • Daimler (MB 229.1)
    • VW 502.00 - 505.00

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Liqui-Moly
    Part #: 2049
    Price: $8.96 (USD) 
    $13.00 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook