Vehicle Lifts for BMW X Series E53 (2000-2006)

Clear BMW chassis
Quick Jack lifting equipment turns wherever you are into a competent repair shop. Their portable lifting solutions make raising your BMW effortless at home or on the track. Stop fiddling with ramps, floor jacks, and jack stands and start lifting your car with ease. All Quick Jack lifting products are located on this page to start making BMW service simple and easy.

QuickJack BL-5000SLX Vehicle Lift - 5,000 Lb. Capacity
QuickJack - Corporate Logo
T#:403176
Part#: BL-5000SLX
On Order, ETA Dec 13, 2018
Starting at $1,384.95
Free Shipping
Starting at $1,384.95
Free Shipping

Working in the garage with a jack and jack stands can be a pain, but most people don't have the space for a full size lift. QuickJack sought to solve this issue and has developed an extensive line of lifts and accessories for any type of vehicle. Unlike traditional lifts that are mounted to the floor permanently, QuickJack lifts are ultra-portable and lightweight, easily transported from home to the track and back in your back seat, trunk, or in your truck bed. Plus, when needed, are significantly faster to use than a jack and jack stands. Just plug in the power connection and within a matter of seconds, you can lift your vehicle 20+ inches off of the ground. Also, unlike jack stands that can be unsteady at significant heights, the QuickJack Vehicle Lift System is very stable. Using rugged welded steel construction and auto-locking safety bars, these lifts will resist the toughest real-world garage and track conditions, resisting excessive movement. If the worst were to happen and something failed while you were underneath of the vehicle, the high strength safety bars will stay locked in position, holding up your vehicle and preventing you from any negative outcomes. The last major feature of the QuickJack Vehicle Lift System is that there are no crossbeams in the center. This opens up the underside of your vehicle for drivetrain, exhaust, and suspension services.

The QuickJack BL-5000SLX is the most popular vehicle lift offered. Thanks to it's size, greater strength than the 3500lb lift, and slightly lighter weight than the 7000lb lift, this lift has become the go to lift for people all across the United States and Canada.

Includes:

  • Jack Frame Assemblies - QTY 2
  • 150" Hydraulic Hoses - QTY 2
  • 14" Auxiliary Hoses - QTY 2
  • Frame Handles - QTY 2
  • 2" x 3" x 4" Rubber Lifting Blocks - QTY 4
  • 3" x 3" x 4" Rubber Lifting Blocks - QTY 4
  • Mini Hydraulic Power Unit With Pendant Control - QTY 1

Specifications:

  • Lifting Capacity: 5,000 lbs. / 2268 kg
  • Minimum Collapsed Height: 3" / 76 mm
  • Platform Lifting Height (Frame only): 17.3" / 439 mm
  • Platform Lifting Height (Small Rubber Block): 18" / 457 mm
  • Platform Lifting Height (Tall Rubber Block): 19" / 483 mm
  • Platform Lifting Height (Stacked Rubber Blocks): 21" / 533 mm
  • Frame Width: 11" / 278 mm
  • Rubber Lift Block Position - Max.: 60" / 1524 mm
  • Rubber Lift Block Position - Min.: 31.5" / 800 mm
  • Overall Frame Length: 70" / 1,778 mm.
  • Individual Frame Weight (each): 76 lbs. / 34 kg
  • Power Unit Weight: 35 lbs. / 16 kg
  • Gross Weight: 212 lbs. / 96 kg
  • Noise: < 45dBA

*Only available for purchase in the contiguous U.S.

QuickJack BL-7000EXT Extended Vehicle Lift - 7,000 Lb. Capacity
QuickJack - Corporate Logo
T#:403124
Part#: BL-7000EXT
On Order, ETA Dec 13, 2018
Starting at $1,594.95
Free Shipping
Starting at $1,594.95
Free Shipping

Working in the garage with a jack and jack stands can be a pain, but most people don't have the space for a full size lift. QuickJack sought to solve this issue and has developed an extensive line of lifts and accessories for any type of vehicle. Unlike traditional lifts that are mounted to the floor permanently, QuickJack lifts are ultra-portable and lightweight, easily transported from home to the track and back in your back seat, trunk, or in your truck bed. Plus, when needed, are significantly faster to use than a jack and jack stands. Just plug in the power connection and within a matter of seconds, you can lift your vehicle 20+ inches off of the ground. Also, unlike jack stands that can be unsteady at significant heights, the QuickJack Vehicle Lift System is very stable. Using rugged welded steel construction and auto-locking safety bars, these lifts will resist the toughest real-world garage and track conditions, resisting excessive movement. If the worst were to happen and something failed while you were underneath of the vehicle, the high strength safety bars will stay locked in position, holding up your vehicle and preventing you from any negative outcomes. The last major feature of the QuickJack Vehicle Lift System is that there are no crossbeams in the center. This opens up the underside of your vehicle for drivetrain, exhaust, and suspension services.

The QuickJack BL-7000EXT is the heaviest duty, extended length lift offered by QuickJack, with a rating of 7000lbs. This lift will quickly raise any cars and most trucks to the lift's full height easily. For additional strength and to minimize deflection, the upper frame rails have been further reinforced. The Extended version features a 6 inch increase in length, giving it a longer lift point spread for vehicles with longer than normal wheel base lengths.

Includes:

  • Jack Frame Assemblies - QTY 2
  • 150" Hydraulic Hoses - QTY 2
  • 14" Auxiliary Hoses - QTY 2
  • Frame Handles - QTY 2
  • 1.5" x 3" x 4" Rubber Lifting Blocks - QTY 4
  • 3" x 3" x 4" Rubber Lifting Blocks - QTY 4
  • Mini Hydraulic Power Unit With Pendant Control - QTY 1

Specifications:

  • Lifting Capacity: 7,000 lbs. / 3,175 kg
  • Minimum Collapsed Height: 3.6" / 91 mm
  • Platform Lifting Height (Frame only): 18.2 / 462 mm
  • Platform Lifting Height (Small Rubber Block): 18.6" / 471 mm
  • Platform Lifting Height (Tall Rubber Block): 19.4" / 493 mm
  • Platform Lifting Height (Stacked Rubber Blocks): 21.6" / 548 m
  • Frame Width: 12.5" / 318 mm
  • Rubber Lift Block Position - Max.: 66" / 1,676 mm
  • Rubber Lift Block Position - Min.: 37.4" / 951 mm
  • Overall Frame Length: 76" / 1,930 mm
  • Individual Frame Weight (ea.): 101 lbs. / 46 kg
  • Power Unit Weight: 35 lbs. / 16 kg.
  • Gross Weight: 262 lbs. / 119 kg
  • Noise: < 45dBA

*Only available for purchase in the contiguous U.S.

QuickJack BL-3500SLX Vehicle Lift - 3,500 Lb. Capacity
QuickJack - Corporate Logo
T#:403178
Part#: BL-3500SLX
On Order, ETA Dec 13, 2018
Starting at $1,169.95
Free Shipping
Starting at $1,169.95
Free Shipping

Working in the garage with a jack and jack stands can be a pain, but most people don't have the space for a full size lift. QuickJack sought to solve this issue and has developed an extensive line of lifts and accessories for any type of vehicle. Unlike traditional lifts that are mounted to the floor permanently, QuickJack lifts are ultra-portable and lightweight, easily transported from home to the track and back in your back seat, trunk, or in your truck bed. Plus, when needed, are significantly faster to use than a jack and jack stands. Just plug in the power connection and within a matter of seconds, you can lift your vehicle 20+ inches off of the ground. Also, unlike jack stands that can be unsteady at significant heights, the QuickJack Vehicle Lift System is very stable. Using rugged welded steel construction and auto-locking safety bars, these lifts will resist the toughest real-world garage and track conditions, resisting excessive movement. If the worst were to happen and something failed while you were underneath of the vehicle, the high strength safety bars will stay locked in position, holding up your vehicle and preventing you from any negative outcomes. The last major feature of the QuickJack Vehicle Lift System is that there are no crossbeams in the center. This opens up the underside of your vehicle for drivetrain, exhaust, and suspension services.

The QuickJack BL-3500SLX is the most portable lift offered. Its weight is lower than that of the 5000lb lift, making it easier to load up in your car or truck and transport to the track.

Includes:

  • Jack Frame Assemblies - QTY 2
  • 150" Hydraulic Hoses - QTY 2
  • 14" Auxiliary Hoses - QTY 2
  • Frame Handles - QTY 2
  • 1.5" x 3" x 4" Rubber Lifting Blocks - QTY 4
  • 3" x 3" x 4" Rubber Lifting Blocks - QTY 4
  • Mini Hydraulic Power Unit With Pendant Control - QTY 1

Specifications:

  • Lifting Capacity: 3,500 lbs. / 1588 kg.
  • Minimum Collapsed Height: 3" / 76 mm.
  • Platform Lifting Height (Frame only): 16.5" / 419 mm.
  • Platform Lifting Height (Small Rubber Block): 17" / 432 mm.
  • Platform Lifting Height (Tall Rubber Block): 18.5" / 470 mm.
  • Platform Lifting Height (Stacked Rubber Blocks): 20" / 508 mm.
  • Frame Width: 10.55" / 268 mm.
  • Rubber Lift Block Position - Max.: 50.5" / 1283 mm.
  • Rubber Lift Block Position - Min.: 26.7" / 678 mm.
  • Overall Frame Length: 62" / 1575 mm.
  • Individual Frame Weight: (ea.) 60 lbs. / 27 kg
  • Power Unit Weight: 35 lbs. / 16 kg.
  • Gross Weight: 180 lbs. / 82 kg.
  • Noise: < 45dBA

*Only available for purchase in the contiguous U.S.


QuickJack BL-5000EXT Extended Vehicle Lift - 5,000 Lb. Capacity
QuickJack - Corporate Logo
T#:403177
Part#: BL-5000EXT
On Order, ETA Dec 13, 2018
Starting at $1,439.95
Free Shipping
Starting at $1,439.95
Free Shipping

Working in the garage with a jack and jack stands can be a pain, but most people don't have the space for a full size lift. QuickJack sought to solve this issue and has developed an extensive line of lifts and accessories for any type of vehicle. Unlike traditional lifts that are mounted to the floor permanently, QuickJack lifts are ultra-portable and lightweight, easily transported from home to the track and back in your back seat, trunk, or in your truck bed. Plus, when needed, are significantly faster to use than a jack and jack stands. Just plug in the power connection and within a matter of seconds, you can lift your vehicle 20+ inches off of the ground. Also, unlike jack stands that can be unsteady at significant heights, the QuickJack Vehicle Lift System is very stable. Using rugged welded steel construction and auto-locking safety bars, these lifts will resist the toughest real-world garage and track conditions, resisting excessive movement. If the worst were to happen and something failed while you were underneath of the vehicle, the high strength safety bars will stay locked in position, holding up your vehicle and preventing you from any negative outcomes. The last major feature of the QuickJack Vehicle Lift System is that there are no crossbeams in the center. This opens up the underside of your vehicle for drivetrain, exhaust, and suspension services.

The QuickJack BL-5000EXT is one of the most popular vehicle lifts offered. Thanks to it's size, greater strength than the 3500lb lift, and slightly lighter weight than the 7000lb lift, this lift has become the go to lift for people all across the United States and Canada. The Extended version features a 6 inch increase in length, giving it a longer lift point spread for vehicles with longer than normal wheel base lengths.

Includes:

  • Jack Frame Assemblies - QTY 2
  • 150" Hydraulic Hoses - QTY 2
  • 14" Auxiliary Hoses - QTY 2
  • Frame Handles - QTY 2
  • 1.5" x 3" x 4" Rubber Lifting Blocks - QTY 4
  • 3" x 3" x 4" Rubber Lifting Blocks - QTY 4
  • Mini Hydraulic Power Unit With Pendant Control - QTY 1

Specifications:

  • Lifting Capacity: 5,000 lbs. / 2268 kg
  • Minimum Collapsed Height: 3" / 76 mm
  • Platform Lifting Height (Frame only): 17.6" / 447 mm
  • Platform Lifting Height (Small Rubber Block): 18.4" / 467 mm
  • Platform Lifting Height (Tall Rubber Block): 19.2" / 487 mm
  • Platform Lifting Height (Stacked Rubber Blocks): 21.3" / 542 mm
  • Frame Width: 11" / 278 mm.
  • Rubber Lift Block Position - Max.: 66" / 1,676 mm
  • Rubber Lift Block Position - Min.: 37.4" / 951 mm
  • Overall Frame Length: 75" / 1,905 mm
  • Individual Frame Weight (each): 80 lbs. / 36 kg
  • Power Unit Weight: 35 lbs. / 16 kg
  • Gross Weight: 220 lbs. / 100 kg
  • Noise: < 45dBA

*Only available for purchase in the contiguous U.S.


QuickJack BL-7000SLX Vehicle Lift - 7,000 Lb. Capacity
QuickJack - Corporate Logo
T#:403125
Part#: BL-7000SLX
On Order, ETA Dec 13, 2018
Starting at $1,544.95
Free Shipping
Starting at $1,544.95
Free Shipping

Working in the garage with a jack and jack stands can be a pain, but most people don't have the space for a full size lift. QuickJack sought to solve this issue and has developed an extensive line of lifts and accessories for any type of vehicle. Unlike traditional lifts that are mounted to the floor permanently, QuickJack lifts are ultra-portable and lightweight, easily transported from home to the track and back in your back seat, trunk, or in your truck bed. Plus, when needed, are significantly faster to use than a jack and jack stands. Just plug in the power connection and within a matter of seconds, you can lift your vehicle 20+ inches off of the ground. Also, unlike jack stands that can be unsteady at significant heights, the QuickJack Vehicle Lift System is very stable. Using rugged welded steel construction and auto-locking safety bars, these lifts will resist the toughest real-world garage and track conditions, resisting excessive movement. If the worst were to happen and something failed while you were underneath of the vehicle, the high strength safety bars will stay locked in position, holding up your vehicle and preventing you from any negative outcomes. The last major feature of the QuickJack Vehicle Lift System is that there are no crossbeams in the center. This opens up the underside of your vehicle for drivetrain, exhaust, and suspension services.

The QuickJack BL-7000SLX is the heaviest duty lift offered by QuickJack, with a rating of 7000lbs. This lift will quickly raise any cars and most trucks to the lift's full height easily. For additional strength and to minimize deflection, the upper frame rails have been further reinforced.

Includes:

  • Jack Frame Assemblies - QTY 2
  • 150" Hydraulic Hoses - QTY 2
  • 14" Auxiliary Hoses - QTY 2
  • Frame Handles - QTY 2
  • 1.5" x 3" x 4" Rubber Lifting Blocks - QTY 4
  • 3" x 3" x 4" Rubber Lifting Blocks - QTY 4
  • Mini Hydraulic Power Unit With Pendant Control - QTY 1

Specifications:

  • Lifting Capacity: 7,000 lbs. / 3175 kg.
  • Minimum Collapsed Height: 3.5" / 89 mm.
  • Platform Lifting Height (Frame only): 18.2" / 462 mm.
  • Platform Lifting Height (Small Rubber Block): 18.5" / 469 mm.
  • Platform Lifting Height (Tall Rubber Block): 19.5" / 495 mm.
  • Platform Lifting Height (Stacked Rubber Blocks): 21.5" / 546 mm.
  • Frame Width: 12.5" / 318 mm.
  • Rubber Lift Block Position - Max.: 60" / 1524 mm.
  • Rubber Lift Block Position - Min.: 31.5" / 800 mm.
  • Overall Frame Length: 71" / 1803 mm.
  • Individual Frame Weight (ea.): 91 lbs. / 41 kg.
  • Power Unit Weight: 35 lbs. / 16 kg.
  • Gross Weight: 242 lbs. / 110 kg.
  • Noise: < 45dBA

*Only available for purchase in the contiguous U.S.

QuickJack Urethane Pinch-Weld Block Set
QuickJack - Corporate Logo
T#:403119
Part#: 5300004
In Stock
$85.00
Free Shipping on orders $99 and up

These QuickJack Urethane Pinch-Weld Blocks can be used with all QuickJack systems. Unibody vehicles that have jack points on a pinch weld that can cause damage to the standard contact blocks or can end up being damaged by a jack pad not designed for pinch welds. These Pinch-Weld blocks are cross slotted and can be placed lengthwise or crosswise to best support the vehicle's jack point.

Features:

  • Specially formulated urethane rubber
  • Bilateral deep slots accommodate virtually all pinch weld frames
  • Position lengthwise or crosswise
  • Water/Chemical resistant and 100% weatherproof
  • Single-piece construction for superior hold

Dimensions: 3.9aEUR (L) x 2.9aEUR (W) x 2.4aEUR (H)


QuickJack Short Rubber Contact Block Set
QuickJack - Corporate Logo
T#:403116
Part#: 5300861
In Stock
$70.00
Free Shipping on orders $99 and up

These QuickJack rubber contact blocks are used with all QuickJack systems and can be used with other QuickJack pads or are perfect to replace missing pads.

These blocks are made of a hardened rubber that has specifically been formulated to resist gouging, cutting, and abrasion. They are also resilient against chemicals and solvents that would normally damage rubber.

Dimensions: 4" long x 1.5" tall x 3" wide

QuickJack Tall Rubber Contact Block Set
QuickJack - Corporate Logo
T#:403118
Part#: 5300862
In Stock
$97.00
Free Shipping on orders $99 and up

These QuickJack rubber contact blocks are used with all QuickJack systems and can be used with other QuickJack pads or are perfect to replace missing pads.

These blocks are made of a hardened rubber that has specifically been formulated to resist gouging, cutting, and abrasion. They are also resilient against chemicals and solvents that would normally damage rubber.

Dimensions: 4" long x 3" tall x 3" wide


QuickJack SUV & Light Truck Adapter Set - BL-5000 & BL-7000 Series
QuickJack - Corporate Logo
T#:403120
Part#: 5150561
In Stock
$225.00
$225.00

Due to clearance issues, many types of lifts require specific adapters that are made for reaching SUV and truck jack points. This 12-piece kit has been made by using stackable adapters that mount inside the lifting block trays so that vehicles with high ground-clearance or those with unique jack point locations are better accommodated. These adapters offer up to 7.2" of additional height when all combined.

Complete kit includes:

  • LowaEURprofile round polyurethane contact pads - Qty: 4
  • Sliding receivers that accommodate the round polyurethane contact pads and/or the stackable adapters - Qty: 4
  • 3" stackable adapters. - Qty: 4

Fits BL-5000SLX/EXT and BL-7000SLX/EXT Series Only.


QuickJack Medium Rubber Contact Block Set
QuickJack - Corporate Logo
T#:403117
Part#: 5300863
In Stock
$76.00
Free Shipping on orders $99 and up

These QuickJack rubber contact blocks are used with all QuickJack systems and can be used with other QuickJack pads or are perfect to replace missing pads. If the blocks included with the QuickJack lift system have a hard time reaching the jack points of the vehicle, these can be used to help properly reach and support the vehicle on the lift.

These blocks are made of a hardened rubber that has specifically been formulated to resist gouging, cutting, and abrasion. They are also resilient against chemicals and solvents that would normally damage rubber.

Dimensions: 4" long x 2" tall x 3" wide

BL-3500SLX - 110 Volt (60Hz) Power Unit
QuickJack - Corporate Logo
T#:553882
Part#: 5175196KT
In Stock
$1,150.00
$1,150.00
AC Hydraulic DK13HLQ Floor Jack With QuickLift Pedal - 2900lb Capacity
AC Hydraulic - Corporate Logo
T#:558012
Part#: TOL-13HLQ
In Stock
$549.00
$549.00

*Features a total lift height of almost 29 inches!*

Looking for the best of the best in your search for a floor jack? AC Hydraulic's DK13HLQ Hydraulic Floor Jack is the answer. This jack is built to take anything you can throw at it and keep on going. Using a wide and robust high-strength steel frame, blue powedercoat paint protection, and built-in safety overload valve, this jack was designed in mind to outlast us all!

Features:

  • Very low minimum height of only 3.15 in
  • Wide and robust frame made of high-strength steel
  • Fitted with quick-lift pedal for easy reach of lifting point
  • Precise and safe control whilst lowering
  • Manual dead manaEURtms release for optimum safety when lowering
  • Built-in safety overload valve
  • Noiseless wheels incorporating a polyurethane central O ring offers maximum surface protection
  • Ergonomically designed handle ensuring positive and safe operation

Specifications:

  • Capacity: 2900 lb
  • Min. height: 3.15 in
  • Max. height: 28.94 in
  • Frame length: 37.01 in
  • Handle length: 37.40 in
  • Frame height: 6.30 in
  • Width: 18.90 in
  • Weight: 86 lb


AC Hydraulic DK20 Floor Jack - 4400lb Capacity
AC Hydraulic - Corporate Logo
T#:557343
Part#: TOL-DK20
In Stock
$399.00
$399.00

Looking for the best of the best in your search for a floor jack? AC Hydraulic's DK20 Hydraulic Floor Jack is the answer. This jack is built to take anything you can throw at it and keep on going. Using a wide and robust high-strength steel frame, blue powedercoat paint protection, and built-in safety overload valve, this jack was designed in mind to outlast us all!

Features:

  • Very low minimum height of only 3.15 inches
  • Wide and robust frame made of high-strength steel
  • Precise and safe control whilst lowering
  • Manual dead manaEURtms release for optimum safety when lowering
  • Built-in safety overload valve
  • Noiseless wheels incorporating a polyurethane central O ring offers maximum surface protection
  • Ergonomically designed handle ensuring positive and safe operation

aEUR<Specifications:

  • Capacity: 4400 lbs
  • Min. height: 3.15 inches
  • Max. height: 19.49 inches
  • Frame length: 25.98 inches
  • Handle length: 37.40 inches
  • Frame height: 6.30 inches
  • Width: 16.14 inches
  • Weight: 68 lbs
AC Hydraulic DK20Q Floor Jack With QuickLift Pedal - 4400lb Capacity
AC Hydraulic - Corporate Logo
T#:558011
Part#: TOL-DK20Q
In Stock
$539.00
$539.00

Looking for the best of the best in your search for a floor jack? AC Hydraulic's DK20Q Hydraulic Floor Jack is the answer. This jack is built to take anything you can throw at it and keep on going. Using a wide and robust high-strength steel frame, blue powedercoat paint protection, and built-in safety overload valve, this jack was designed in mind to outlast us all!

Features:

  • Very low minimum height of only 3.15 inches
  • Wide and robust frame made of high-strength steel
  • Precise and safe control whilst lowering
  • Manual dead manaEURtms release for optimum safety when lowering
  • Built-in safety overload valve
  • Noiseless wheels incorporating a polyurethane central O ring offers maximum surface protection
  • Ergonomically designed handle ensuring positive and safe operation
  • DK20Q is fitted with quick-lift pedal for easy reach of lifting point

Specifications:

  • Capacity: 4400 lbs
  • Min. height: 3.15 inches
  • Max. height: 19.49 inches
  • Frame length: 25.98 inches
  • Handle length: 37.40 inches
  • Frame height: 6.30 inches
  • Width: 16.14 inches
  • Weight: 68 lbs
BL-7000EXT - 110 Volt (60Hz) Power Unit
QuickJack - Corporate Logo
T#:553890
Part#: 5175218KT
In Stock
$1,575.00
$1,575.00

BL-5000SLX - 110 Volt (60Hz) Power Unit
QuickJack - Corporate Logo
T#:553884
Part#: 5175376KT
In Stock
$1,365.00
$1,365.00

AC Hydraulic T3 Cross Beam Adapter
AC Hydraulic - Corporate Logo
T#:558019
Part#: TOL-3606000
Ships on Jan 4, 2019
$159.00
$159.00

AC Hydraulic offers their T3 telescopic cross beam adapter for their hydraulic floor jacks, allowing you to change out both of the front or rear wheels at the same time or service the suspension system with ease.

This cross beam has a reach of 29.33-45.28 inches and a total lifting capacity of 2200lbs!

AC Hydraulic High Clearance Jack Extension - 100 Mm
AC Hydraulic - Corporate Logo
T#:558021
Part#: TOL-FDK1
Ships on Jan 4, 2019
$49.95