Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

E61 Helmets

Stay protected and legal on the track with our recommended selection of helmets on this page.
You're currently viewing parts for your (E61) 5-Series Touring 2006-2010. Reset your chassis
For accurate results, specify your model below.
RaceQuip PRO15 Top Air Snell SA2015 Helmets - Flat Black

The RaceQuip PRO15 Top Air Helmet is a Snell SA2015 rated full face auto racing helmet that incorporates contemporary styling with modern production techniques. The features are the same as that of the PRO15 Side Air helmet but with a top air inlet. These helmets are also sometimes called forced air, blower, or pumper helmets because they have a provision on the helmet to attach a fresh air hose.

The Fiber Reinforced Polymer (FRP) shell is hand laid to achieve a balance between light weight and affordability. Reinforced M6 threaded HANS/HNR inserts are mated to the shell along with an expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. Forced air is plumbed under the shell of the helmet through a standard 1.250" barbed fitting and then flows across the faceshield. The distortion free 3mm polycarbonate faceshield features an aluminum pivot kit, hand ratcheting TearOff posts, and a silicone eyeport gasket to seal out dust and dirt. A wide eyeport provides good peripheral vision and allows the use of personal eyewear.

The SA rating means that the Nomex(R) interior and paint are fire retardant as well as the kevlar chin strap, so the RaceQuip PRO15 Side Air Helmet is suitable for use in all forms of motorsports. The comfort fit blended Nomex® interior along with exhaust vents on the top and back of the shell help keep your scalp cool. All these features are wrapped in a stylish aero design hand laid FRP shell with a medium sized chin spoiler and the result is the outstanding value delivered by the RaceQuip PRO15 Top Air helmet.

Features and Specifications:

  • Exceeds Snell SA2015 Rating - Sticker Inside
  • Fiber Reinforced Polymer (FRP) Shell 
  • HANS / HNR M6 Threaded Inserts In Shell
  • Air Inlet Is Standard 1.250" Round Barb Fitting
  • Air Is Routed Left To Right Across Faceshield 
  • Expanded Polystyrene (EPS) Liner
  • Comfort Fit Blended Nomex® Interior
  • HANS Anchor Posts Bolt Right On (not incl.)
  • Distortion Free 3mm Polycarbonate Shield
  • Aluminum Pivot Kit W/Adjustable Friction Lock
  • Tear-Off Posts Hand Ratchet To Eight Positions
  • Silicone Eyeport Gasket Seals Out Dirt 
  • Kevlar® Chin Strap
  • Great Peripheral Vision
  • Fire Retardant Paint and Interior
  • Slick Aero Design With Chin Spoiler
  • Available in Gloss White and Flat Black
Racequip
Part #: RQPRO15FFTAIRB
Price: $279.95 (USD) 
Direct Ship
RaceQuip Carbon Fiber VESTA15 SA/FIA Full Face Helmets

The Matrix and Carbon Fiber models of the RaceQuip VESTA15 helmet feature ultra-lightweight Kevlar and/or Carbon Fiber construction. The Matrix model is hand laid using high-strength Kevlar fabric along with a durable epoxy resin to assure a lightweight shell with a superior finish.

If you are looking for something even lighter, the Carbon Fiber VESTA15 is hand laid utilizing alternating layers of Kevlar and Carbon Fiber to achieve a super light, yet rigid, shell. The helmet is clear coated to give it a deep gloss finish that really showcases the Carbon weave.

Both the Matrix and Carbon Fiber VESTA15 models are certified to both Snell SA2015 and FIA 8859 standards. This dual certification assures that these helmets can be used in most any motorsports event worldwide.

RaceQuip's VESTA15 full face helmet is a bold departure from traditional auto racing helmet styling. The VESTA15 incorporates contemporary design with modern production techniques to achieve a balance between light weight and affordability. This innovative new helmet model features a hand laid shell in either Kevlar (Matrix) or Carbon Fiber construction with a uniquely shaped chin bar to support a scalloped faceshield design. The reinforced M6 threaded HANS / Forward Head Restraint inserts are mated to the shell as is the expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. The distortion free 3mm polycarbonate faceshield features a molded thumb catch, aluminum pivot kit, hand ratcheting TearOff posts, and a silicone eyeport gasket to seal out dust and dirt. A wide eyeport provides good peripheral vision and allows the use of personal eyewear. Additionally, an extra set of thicker cheek pads are included to allow a customized fit. The dual SA and FIA ratings means that the Nomex interior and paint are fire retardant as well as the kevlar chin strap, so the RaceQuip VESTA15 Helmet is suitable for use in all forms of motorsports. The comfort fit blended Nomex® interior along with exhaust vents on the top and back of the shell help keep your scalp cool. All these features are wrapped in a hand laid Kevalr and/or Carbon Fiber shell with aggresive styling. The result is the outstanding value delivered by the RaceQuip VESTA15.

Features and Specifications:

  • Exceeds Snell SA2015 and FIA 8859 - Both Certification Stickers Inside
  • Hand Laid Kevlar / Carbon Fiber Shell
  • HANS M6 Threaded Inserts Installed
  • Expanded Polystyrene (EPS) Liner
  • Comfort Fit Blended Nomex® Interior
  • HANS / FHR Anchor Posts Bolt Right On (not included)
  • Distortion Free 3mm Low Fog Polycarbonate Faceshield
  • Aluminum Pivot Kit W/Adj. Friction Lock
  • TearOff Posts Hand Ratchet To Eight Positions - No Tools Needed
  • Silicone Eyeport Gasket Seals Out Dirt 
  • Kevlar® Chin Strap
  • Extra Cheek Pads Included For Custom Fit
  • Great Peripheral Vision
  • Fire Retardant Paint and Interior
  • Bold New Styling W/Goggle Type Faceshield
  • Available in Pearl White, Gloss Black, and Clear Coated Carbon Fiber
  • Stocked in Sizes S - 2XL
Racequip
Part #: RQMATRIXVFF2
Price: $599.95 (USD) 
Direct Ship
RaceQuip PRO15 Snell SA2015 Full Face Helmets - Carbon Graphic

The RaceQuip PRO15 Carbon Graphic is built the same the other Snell SA-2015 rated full face PRO15 helmets in the line, except that it incorporates a Carbon Fiber graphic overlay. While the look of the helmet appears to be Carbon Fiber, we use a hand laid Fiber Reinforced Polymer (FRP) shell to achieve a balance between light weight and affordability. This is not a true Carbon Fiber helmet, the FRP used is a premium high strength Fiberglass that is then wrapped with a carbon fiber graphic laminant that is clear coated to give the helmets a deep gloss finish. If you like the look of Carbon Fiber but don't want to break the bank, these look as good as real Carbon.

The SA rating means that the Nomex(R) interior and paint are fire retardant as well as the kevlar chin strap, so the RaceQuip PRO15 Helmet is suitable for use in all forms of motorsports. The comfort fit blended Nomex® interior along with exhaust vents on the top and back of the shell help keep your scalp cool.  All these features are wrapped in a stylish aero design hand laid FRP shell with a medium sized chin spoiler and the result is the outstanding value delivered by the RaceQuip PRO15 full face helmet.

Features and Specifications:

  • Exceeds Snell SA2015 Rating - Sticker Inside
  • Fiber Reinforced Polymer (FRP) Shell 
  • Carbon Fiber Graphic Overlay
  • Deep Gloss Clear Coat Finish
  • HANS / HNR M6 Threaded Inserts In Shell
  • Expanded Polystyrene (EPS) Liner
  • Comfort Fit Blended Nomex® Interior
  • HANS Anchor Posts Bolt Right On (not incl.)
  • Distortion Free 3mm Polycarbonate Shield
  • Aluminum Pivot Kit w/Adj. Friction Lock
  • TearOff Posts Hand Ratchet To 8 Positions
  • Silicone Eyeport Gasket Seals Out Dirt 
  • Kevlar® Chin Strap
  • Great Peripheral Vision
  • Fire Retardant Clear Coat and Interior
  • Slick Aero Design With Chin Spoiler
  • Stocked in Sizes XXS - 3XL
Racequip
Part #: RQPRO15FFHCG
Price: $289.95 (USD) 
Direct Ship
RaceQuip VESTA15 Snell SA2015 Full Face Helmets - Gloss Black

Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear now is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

RaceQuip's all new VESTA15 full face Snell SA-2015 helmet is a bold departure from traditional auto racing helmet styling. The VESTA15 incorporates contemporary design with modern production techniques to achieve a balance between light weight and affordability. This innovative new helmet model features a hand laid Fiber Reinforced Polymer (FRP) shell and a uniquely shaped chin bar to support a scalloped faceshield design. The FRP used for shell construction is a premium high strength Fiberglass. 

Reinforced M6 threaded HANS/HNR inserts are mated to the shell along with an expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. The distortion free 3mm polycarbonate faceshield features a molded thumb catch, aluminum pivot kit, hand ratcheting TearOff posts, and a silicone eyeport gasket to seal out dust and dirt. A wide eyeport provides good peripheral vision and allows the use of personal eyewear. Additionally, an extra set of thicker cheek pads are included to allow a customized fit.

The SA rating means that the Nomex(R) interior and paint are fire retardant as well as the kevlar chin strap, so the RaceQuip VESTA15 Helmet is suitable for use in all forms of motorsports. The comfort fit blended Nomex® interior along with exhaust vents on the top and back of the shell help keep your scalp cool. All these features are wrapped in a hand laid FRP shell with aggresive styling and the result is the outstanding value delivered by the RaceQuip VESTA15.

Available in Pearl White, Gloss Black, and Flat Black in sizes Small - 2XL

Features and Specifications:

  • Exceeds Snell SA2015 - Sticker Inside
  • Hand Laid Fiber Reinforced Polymer (FRP) Shell
  • HANS M6 Threaded Inserts Installed
  • Expanded Polystyrene (EPS) Liner
  • Comfort Fit Blended Nomex® Interior
  • HANS / HNR Anchor Posts Bolt Right On (not included)
  • Distortion Free 3mm Low Fog Polycarbonate Faceshield
  • Aluminum Pivot Kit W/Adj. Friction Lock
  • TearOff Posts Hand Ratchet To Eight Positions - No Tools Needed
  • Silicone Eyeport Gasket Seals Out Dirt 
  • Kevlar® Chin Strap
  • Extra Cheek Pads Included For Fitting
  • Great Peripheral Vision
  • Fire Retardant Paint and Interior
  • Bold New Styling W/Goggle Type Shield
  • Available in Pearl White, Gloss Black, and Flat Black
  • Stocked in Sizes S - 2XL
Racequip
Part #: RQVESTA15FF
Price: $349.95 (USD) 
Direct Ship
RaceQuip PRO15 Snell SA2015 Full Face Helmets - Gloss Black

The RaceQuip PRO15 is a Snell SA2015 rated full face auto racing helmet that incorporates contemporary styling with modern production techniques. 

The Fiber Reinforced Polymer (FRP) shell is hand laid to achieve a balance between light weight and affordability. Reinforced M6 threaded HANS/HNR inserts are mated to the shell along with an expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. The distortion free 3mm polycarbonate faceshield features an aluminum pivot kit, hand ratcheting TearOff posts, and a silicone eyeport gasket to seal out dust and dirt. A wide eyeport provides good peripheral vision and allows the use of personal eyewear. 

The SA rating means that the Nomex(R) interior and paint are fire retardant as well as the kevlar chin strap, so the RaceQuip PRO15 Helmet is suitable for use in all forms of motorsports. The comfort fit blended Nomex® interior along with exhaust vents on the top and back of the shell help keep your scalp cool.  All these features are wrapped in a stylish aero design hand laid FRP shell with a medium sized chin spoiler and the result is the outstanding value delivered by the RaceQuip PRO15 full face helmet.

Features and Specifications:

  • Exceeds Snell SA2015 Rating - Sticker Inside
  • Fiber Reinforced Polymer (FRP) Shell 
  • HANS / HNR M6 Threaded Inserts In Shell
  • Expanded Polystyrene (EPS) Liner
  • Comfort Fit Blended Nomex® Interior
  • HANS Anchor Posts Bolt Right On (not incl.)
  • Distortion Free 3mm Polycarbonate Shield
  • Aluminum Pivot Kit W/Adjustable Friction Lock
  • TearOff Posts Hand Ratchet To Eight Positions
  • Silicone Eyeport Gasket Seals Out Dirt 
  • Kevlar® Chin Strap
  • Great Peripheral Vision
  • Fire Retardant Paint and Interior
  • Slick Aero Design With Chin Spoiler
  • Available in Gloss Black, Gloss White, Gloss Steel, Flat Black, and Hot Pink
  • Stocked in Sizes XXS - 3XL
Racequip
Part #: RQPRO15FFHGB
Price: $219.95 (USD) 
Direct Ship
RaceQuip PRO15 Snell SA2015 Full Face Helmets - Flat Black

The RaceQuip PRO15 is a Snell SA2015 rated full face auto racing helmet that incorporates contemporary styling with modern production techniques.

The Fiber Reinforced Polymer (FRP) shell is hand laid to achieve a balance between light weight and affordability. Reinforced M6 threaded HANS/HNR inserts are mated to the shell along with an expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. The distortion free 3mm polycarbonate faceshield features an aluminum pivot kit, hand ratcheting TearOff posts, and a silicone eyeport gasket to seal out dust and dirt. A wide eyeport provides good peripheral vision and allows the use of personal eyewear.

The SA rating means that the Nomex(R) interior and paint are fire retardant as well as the kevlar chin strap, so the RaceQuip PRO15 Helmet is suitable for use in all forms of motorsports. The comfort fit blended Nomex® interior along with exhaust vents on the top and back of the shell help keep your scalp cool.  All these features are wrapped in a stylish aero design hand laid FRP shell with a medium sized chin spoiler and the result is the outstanding value delivered by the RaceQuip PRO15 full face helmet.

Features and Specifications:

  • Exceeds Snell SA2015 Rating - Sticker Inside
  • Fiber Reinforced Polymer (FRP) Shell 
  • HANS / HNR M6 Threaded Inserts In Shell
  • Expanded Polystyrene (EPS) Liner
  • Comfort Fit Blended Nomex® Interior
  • HANS Anchor Posts Bolt Right On (not incl.)
  • Distortion Free 3mm Polycarbonate Shield
  • Aluminum Pivot Kit W/Adjustable Friction Lock
  • TearOff Posts Hand Ratchet To Eight Positions
  • Silicone Eyeport Gasket Seals Out Dirt 
  • Kevlar® Chin Strap
  • Great Peripheral Vision
  • Fire Retardant Paint and Interior
  • Slick Aero Design With Chin Spoiler
  • Available in Gloss Black, Gloss White, Gloss Steel, Flat Black, and Hot Pink
  • Stocked in Sizes XXS - 3XL
Racequip
Part #: RQPRO15FFHFB
Price: $219.95 (USD) 
Direct Ship
RaceQuip OF15 Open Face Snell SA2015 Helmets - White

The RaceQuip OF15 is a Snell SA2015 rated open face auto racing helmet that incorporates contemporary styling with modern production techniques.

The Fiber Reinforced Polymer (FRP) shell is hand laid to achieve a balance between light weight and affordability. Reinforced M6 threaded HANS/HNR inserts are mated to the shell along with an expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. A wide eyeport provides good peripheral vision and allows the use of personal eyewear.

The SA rating means that the Nomex® interior and paint are fire retardant as well as the kevlar chin strap, so the RaceQuip OF15 Helmet is suitable for use in all forms of motorsports. An open face helmet can be used when you have a full windshield in the car and is favored among track day and HPDE participants. The comfort fit Nomex® interior along with exhaust vents on the top of the shell help keep your scalp cool. All these features are wrapped in a hand laid FRP shell and the result is the outstanding value delivered by the RaceQuip OF15 open face helmet. 

Features and Specification:

  • Exceeds Snell SA2015 Rating - Sticker Inside
  • Hand Laid FRP (Fiber Reinforced Polymer) Shell
  • Expanded Polystyrene (EPS) Liner
  • Comfort Fit Nomex® Interior
  • HANS / HNR M6 Threaded Insterts in Shell
  • HANS or HNR Posts Bolt Right On (Not Incl.)
  • ABS Visor with Tinted Sun Shield
  • Fire Retardant Paint and Interior
  • Kevlar® Chin Strap
  • Wide Eyeport Accommodates Glasses
  • Great Peripheral Vision
  • White High Gloss Finish
  • Sizes S - 2XL
Racequip
Part #: RQ0F15W
Price: $189.95 (USD) 
Direct Ship
RaceQuip PRO15 Top Air Snell SA2015 Helmets - Gloss White

The RaceQuip PRO15 Top Air Helmet is a Snell SA2015 rated full face auto racing helmet that incorporates contemporary styling with modern production techniques. The features are the same as that of the PRO15 Side Air helmet but with a top air inlet. These helmets are also sometimes called forced air, blower, or pumper helmets because they have a provision on the helmet to attach a fresh air hose.

The Fiber Reinforced Polymer (FRP) shell is hand laid to achieve a balance between light weight and affordability. Reinforced M6 threaded HANS/HNR inserts are mated to the shell along with an expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. Forced air is plumbed under the shell of the helmet through a standard 1.250" barbed fitting and then flows across the faceshield. The distortion free 3mm polycarbonate faceshield features an aluminum pivot kit, hand ratcheting TearOff posts, and a silicone eyeport gasket to seal out dust and dirt. A wide eyeport provides good peripheral vision and allows the use of personal eyewear.

The SA rating means that the Nomex(R) interior and paint are fire retardant as well as the kevlar chin strap, so the RaceQuip PRO15 Side Air Helmet is suitable for use in all forms of motorsports. The comfort fit blended Nomex® interior along with exhaust vents on the top and back of the shell help keep your scalp cool. All these features are wrapped in a stylish aero design hand laid FRP shell with a medium sized chin spoiler and the result is the outstanding value delivered by the RaceQuip PRO15 Top Air helmet.

Features and Specifications:

  • Exceeds Snell SA2015 Rating - Sticker Inside
  • Fiber Reinforced Polymer (FRP) Shell 
  • HANS / HNR M6 Threaded Inserts In Shell
  • Air Inlet Is Standard 1.250" Round Barb Fitting
  • Air Is Routed Left To Right Across Faceshield 
  • Expanded Polystyrene (EPS) Liner
  • Comfort Fit Blended Nomex® Interior
  • HANS Anchor Posts Bolt Right On (not incl.)
  • Distortion Free 3mm Polycarbonate Shield
  • Aluminum Pivot Kit W/Adjustable Friction Lock
  • Tear-Off Posts Hand Ratchet To Eight Positions
  • Silicone Eyeport Gasket Seals Out Dirt 
  • Kevlar® Chin Strap
  • Great Peripheral Vision
  • Fire Retardant Paint and Interior
  • Slick Aero Design With Chin Spoiler
  • Available in Gloss White and Flat Black
Racequip
Part #: RQPRO15FFTAIRW
Price: $279.95 (USD) 
Direct Ship
RaceQuip PRO15 Snell SA2015 Full Face Helmets - Hot Pink

The RaceQuip PRO15 is a Snell SA2015 rated full face auto racing helmet that incorporates contemporary styling with modern production techniques. 

The Fiber Reinforced Polymer (FRP) shell is hand laid to achieve a balance between light weight and affordability. Reinforced M6 threaded HANS/HNR inserts are mated to the shell along with an expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. The distortion free 3mm polycarbonate faceshield features an aluminum pivot kit, hand ratcheting TearOff posts, and a silicone eyeport gasket to seal out dust and dirt. A wide eyeport provides good peripheral vision and allows the use of personal eyewear. 

The SA rating means that the Nomex(R) interior and paint are fire retardant as well as the kevlar chin strap, so the RaceQuip PRO15 Helmet is suitable for use in all forms of motorsports. The comfort fit blended Nomex® interior along with exhaust vents on the top and back of the shell help keep your scalp cool.  All these features are wrapped in a stylish aero design hand laid FRP shell with a medium sized chin spoiler and the result is the outstanding value delivered by the RaceQuip PRO15 full face helmet.

Features and Specifications:

  • Exceeds Snell SA2015 Rating - Sticker Inside
  • Fiber Reinforced Polymer (FRP) Shell 
  • HANS / HNR M6 Threaded Inserts In Shell
  • Expanded Polystyrene (EPS) Liner
  • Comfort Fit Blended Nomex® Interior
  • HANS Anchor Posts Bolt Right On (not incl.)
  • Distortion Free 3mm Polycarbonate Shield
  • Aluminum Pivot Kit W/Adjustable Friction Lock
  • TearOff Posts Hand Ratchet To Eight Positions
  • Silicone Eyeport Gasket Seals Out Dirt 
  • Kevlar® Chin Strap
  • Great Peripheral Vision
  • Fire Retardant Paint and Interior
  • Slick Aero Design With Chin Spoiler
  • Available in Gloss Black, Gloss White, Gloss Steel, Flat Black, and Hot Pink
  • Stocked in Sizes XXS - 3XL
Racequip
Part #: RQPRO15FFHHP
Price: $239.95 (USD) 
Direct Ship
RaceQuip Matrix VESTA15 SA/FIA Full Face Helmets - Flat Black

The Matrix and Carbon Fiber models of the RaceQuip VESTA15 helmet feature ultra-lightweight Kevlar and/or Carbon Fiber construction. The Matrix model is hand laid using high-strength Kevlar fabric along with a durable epoxy resin to assure a lightweight shell with a superior finish.

If you are looking for something even lighter, the Carbon Fiber VESTA15 is hand laid utilizing alternating layers of Kevlar and Carbon Fiber to achieve a super light, yet rigid, shell. The helmet is clear coated to give it a deep gloss finish that really showcases the Carbon weave.

Both the Matrix and Carbon Fiber VESTA15 models are certified to both Snell SA2015 and FIA 8859 standards. This dual certification assures that these helmets can be used in most any motorsports event worldwide.

RaceQuip's VESTA15 full face helmet is a bold departure from traditional auto racing helmet styling. The VESTA15 incorporates contemporary design with modern production techniques to achieve a balance between light weight and affordability. This innovative new helmet model features a hand laid shell in either Kevlar (Matrix) or Carbon Fiber construction with a uniquely shaped chin bar to support a scalloped faceshield design. The reinforced M6 threaded HANS / Forward Head Restraint inserts are mated to the shell as is the expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. The distortion free 3mm polycarbonate faceshield features a molded thumb catch, aluminum pivot kit, hand ratcheting TearOff posts, and a silicone eyeport gasket to seal out dust and dirt. A wide eyeport provides good peripheral vision and allows the use of personal eyewear. Additionally, an extra set of thicker cheek pads are included to allow a customized fit. The dual SA and FIA ratings means that the Nomex interior and paint are fire retardant as well as the kevlar chin strap, so the RaceQuip VESTA15 Helmet is suitable for use in all forms of motorsports. The comfort fit blended Nomex® interior along with exhaust vents on the top and back of the shell help keep your scalp cool. All these features are wrapped in a hand laid Kevalr and/or Carbon Fiber shell with aggresive styling. The result is the outstanding value delivered by the RaceQuip VESTA15.

Features and Specifications:

  • Exceeds Snell SA2015 and FIA 8859 - Both Certification Stickers Inside
  • Hand Laid Kevlar / Carbon Fiber Shell
  • HANS M6 Threaded Inserts Installed
  • Expanded Polystyrene (EPS) Liner
  • Comfort Fit Blended Nomex® Interior
  • HANS / FHR Anchor Posts Bolt Right On (not included)
  • Distortion Free 3mm Low Fog Polycarbonate Faceshield
  • Aluminum Pivot Kit W/Adj. Friction Lock
  • TearOff Posts Hand Ratchet To Eight Positions - No Tools Needed
  • Silicone Eyeport Gasket Seals Out Dirt 
  • Kevlar® Chin Strap
  • Extra Cheek Pads Included For Custom Fit
  • Great Peripheral Vision
  • Fire Retardant Paint and Interior
  • Bold New Styling W/Goggle Type Faceshield
  • Available in Pearl White, Gloss Black, and Clear Coated Carbon Fiber
  • Stocked in Sizes S - 2XL
Racequip
Part #: RQMATRIXVFF1
Price: $399.95 (USD) 
Direct Ship
RaceQuip PRO15 Snell SA2015 Full Face Helmets - Gloss Steel

The RaceQuip PRO15 is a Snell SA2015 rated full face auto racing helmet that incorporates contemporary styling with modern production techniques. 

The Fiber Reinforced Polymer (FRP) shell is hand laid to achieve a balance between light weight and affordability. Reinforced M6 threaded HANS/HNR inserts are mated to the shell along with an expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. The distortion free 3mm polycarbonate faceshield features an aluminum pivot kit, hand ratcheting TearOff posts, and a silicone eyeport gasket to seal out dust and dirt. A wide eyeport provides good peripheral vision and allows the use of personal eyewear. 

The SA rating means that the Nomex(R) interior and paint are fire retardant as well as the kevlar chin strap, so the RaceQuip PRO15 Helmet is suitable for use in all forms of motorsports. The comfort fit blended Nomex® interior along with exhaust vents on the top and back of the shell help keep your scalp cool.  All these features are wrapped in a stylish aero design hand laid FRP shell with a medium sized chin spoiler and the result is the outstanding value delivered by the RaceQuip PRO15 full face helmet.

Features and Specifications:

  • Exceeds Snell SA2015 Rating - Sticker Inside
  • Fiber Reinforced Polymer (FRP) Shell 
  • HANS / HNR M6 Threaded Inserts In Shell
  • Expanded Polystyrene (EPS) Liner
  • Comfort Fit Blended Nomex® Interior
  • HANS Anchor Posts Bolt Right On (not incl.)
  • Distortion Free 3mm Polycarbonate Shield
  • Aluminum Pivot Kit W/Adjustable Friction Lock
  • TearOff Posts Hand Ratchet To Eight Positions
  • Silicone Eyeport Gasket Seals Out Dirt 
  • Kevlar® Chin Strap
  • Great Peripheral Vision
  • Fire Retardant Paint and Interior
  • Slick Aero Design With Chin Spoiler
  • Available in Gloss Black, Gloss White, Gloss Steel, Flat Black, and Hot Pink
  • Stocked in Sizes XXS - 3XL
Racequip
Part #: RQPRO15FFHGS
Price: $239.95 (USD) 
Direct Ship
RaceQuip PRO15 Snell SA2015 Full Face Helmets - Gloss White

The RaceQuip PRO15 is a Snell SA2015 rated full face auto racing helmet that incorporates contemporary styling with modern production techniques. 

The Fiber Reinforced Polymer (FRP) shell is hand laid to achieve a balance between light weight and affordability. Reinforced M6 threaded HANS/HNR inserts are mated to the shell along with an expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. The distortion free 3mm polycarbonate faceshield features an aluminum pivot kit, hand ratcheting TearOff posts, and a silicone eyeport gasket to seal out dust and dirt. A wide eyeport provides good peripheral vision and allows the use of personal eyewear. 

The SA rating means that the Nomex(R) interior and paint are fire retardant as well as the kevlar chin strap, so the RaceQuip PRO15 Helmet is suitable for use in all forms of motorsports. The comfort fit blended Nomex® interior along with exhaust vents on the top and back of the shell help keep your scalp cool.  All these features are wrapped in a stylish aero design hand laid FRP shell with a medium sized chin spoiler and the result is the outstanding value delivered by the RaceQuip PRO15 full face helmet.

Features and Specifications:

  • Exceeds Snell SA2015 Rating - Sticker Inside
  • Fiber Reinforced Polymer (FRP) Shell 
  • HANS / HNR M6 Threaded Inserts In Shell
  • Expanded Polystyrene (EPS) Liner
  • Comfort Fit Blended Nomex® Interior
  • HANS Anchor Posts Bolt Right On (not incl.)
  • Distortion Free 3mm Polycarbonate Shield
  • Aluminum Pivot Kit W/Adjustable Friction Lock
  • TearOff Posts Hand Ratchet To Eight Positions
  • Silicone Eyeport Gasket Seals Out Dirt 
  • Kevlar® Chin Strap
  • Great Peripheral Vision
  • Fire Retardant Paint and Interior
  • Slick Aero Design With Chin Spoiler
  • Available in Gloss Black, Gloss White, Gloss Steel, Flat Black, and Hot Pink
  • Stocked in Sizes XXS - 3XL
Racequip
Part #: RQPRO15FFHGW
Price: $219.95 (USD) 
Direct Ship
RaceQuip VESTA15 Snell SA2015 Full Face Helmets - Flat Black

Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear now is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

RaceQuip's all new VESTA15 full face Snell SA-2015 helmet is a bold departure from traditional auto racing helmet styling. The VESTA15 incorporates contemporary design with modern production techniques to achieve a balance between light weight and affordability. This innovative new helmet model features a hand laid Fiber Reinforced Polymer (FRP) shell and a uniquely shaped chin bar to support a scalloped faceshield design. The FRP used for shell construction is a premium high strength Fiberglass.  

Reinforced M6 threaded HANS/HNR inserts are mated to the shell along with an expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. The distortion free 3mm polycarbonate faceshield features a molded thumb catch, aluminum pivot kit, hand ratcheting TearOff posts, and a silicone eyeport gasket to seal out dust and dirt. A wide eyeport provides good peripheral vision and allows the use of personal eyewear. Additionally, an extra set of thicker cheek pads are included to allow a customized fit. 

The SA rating means that the Nomex(R) interior and paint are fire retardant as well as the kevlar chin strap, so the RaceQuip VESTA15 Helmet is suitable for use in all forms of motorsports. The comfort fit blended Nomex® interior along with exhaust vents on the top and back of the shell help keep your scalp cool. All these features are wrapped in a hand laid FRP shell with aggresive styling and the result is the outstanding value delivered by the RaceQuip VESTA15. 

Available in Pearl White, Gloss Black, and Flat Black in sizes Small - 2XL

Features and Specifications:

  • Exceeds Snell SA2015 - Sticker Inside
  • Hand Laid Fiber Reinforced Polymer (FRP) Shell
  • HANS M6 Threaded Inserts Installed
  • Expanded Polystyrene (EPS) Liner
  • Comfort Fit Blended Nomex® Interior
  • HANS / HNR Anchor Posts Bolt Right On (not included)
  • Distortion Free 3mm Low Fog Polycarbonate Faceshield
  • Aluminum Pivot Kit W/Adj. Friction Lock
  • TearOff Posts Hand Ratchet To Eight Positions - No Tools Needed
  • Silicone Eyeport Gasket Seals Out Dirt 
  • Kevlar® Chin Strap
  • Extra Cheek Pads Included For Fitting
  • Great Peripheral Vision
  • Fire Retardant Paint and Interior
  • Bold New Styling W/Goggle Type Shield
  • Available in Pearl White, Gloss Black, and Flat Black
  • Stocked in Sizes S - 2XL
Racequip
Part #: RQVESTA15FF2
Price: $349.95 (USD) 
Direct Ship
RaceQuip PRO15 Side Air Snell SA2015 Helmets - Flat Black

The RaceQuip PRO15 Side Air is a Snell SA2015 rated full face auto racing helmet that incorporates contemporary styling with modern production techniques. These helmets are also sometimes called forced air, blower, or pumper helmets because they have a provision on the helmet to attach a fresh air hose.

The Fiber Reinforced Polymer (FRP) shell is hand laid to achieve a balance between light weight and affordability. Reinforced M6 threaded HANS/HNR inserts are mated to the shell along with an expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. Forced air is plumbed into the left side of the helmet through a standard 1.250" barbed fitting so air flows across the faceshield from left to right. The distortion free 3mm polycarbonate faceshield features an aluminum pivot kit, hand ratcheting TearOff posts, and a silicone eyeport gasket to seal out dust and dirt. A wide eyeport provides good peripheral vision and allows the use of personal eyewear.

The SA rating means that the Nomex(R) interior and paint are fire retardant as well as the kevlar chin strap, so the RaceQuip PRO15 Side Air Helmet is suitable for use in all forms of motorsports. The comfort fit blended Nomex® interior along with exhaust vents on the top and back of the shell help keep your scalp cool.  All these features are wrapped in a stylish aero design hand laid FRP shell with a medium sized chin spoiler and the result is the outstanding value delivered by the RaceQuip PRO15 Side Air helmet. 

Features and Specification:

  • Exceeds Snell SA2015 Rating - Sticker Inside
  • Fiber Reinforced Polymer (FRP) Shell 
  • HANS / HNR M6 Threaded Inserts In Shell
  • Air Inlet Is Standard 1.250" Round Barb Fitting
  • Air Is Routed Left To Right Across Faceshield 
  • Expanded Polystyrene (EPS) Liner
  • Comfort Fit Blended Nomex® Interior
  • HANS Anchor Posts Bolt Right On (not incl.)
  • Distortion Free 3mm Polycarbonate Shield
  • Aluminum Pivot Kit W/Adjustable Friction Lock
  • Tear-Off Posts Hand Ratchet To Eight Positions
  • Silicone Eyeport Gasket Seals Out Dirt 
  • Kevlar® Chin Strap
  • Great Peripheral Vision
  • Fire Retardant Paint and Interior
  • Slick Aero Design With Chin Spoiler
  • Available in Gloss White and Flat Black
  • Stocked in Sizes S - 2XL
Racequip
Part #: RQPRO15FFAIRB
Price: $269.95 (USD) 
Direct Ship
RaceQuip PRO15 Side Air Snell SA2015 Helmets - Gloss White

The RaceQuip PRO15 Side Air is a Snell SA2015 rated full face auto racing helmet that incorporates contemporary styling with modern production techniques. These helmets are also sometimes called forced air, blower, or pumper helmets because they have a provision on the helmet to attach a fresh air hose.

The Fiber Reinforced Polymer (FRP) shell is hand laid to achieve a balance between light weight and affordability. Reinforced M6 threaded HANS/HNR inserts are mated to the shell along with an expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. Forced air is plumbed into the left side of the helmet through a standard 1.250" barbed fitting so air flows across the faceshield from left to right. The distortion free 3mm polycarbonate faceshield features an aluminum pivot kit, hand ratcheting TearOff posts, and a silicone eyeport gasket to seal out dust and dirt. A wide eyeport provides good peripheral vision and allows the use of personal eyewear.

The SA rating means that the Nomex(R) interior and paint are fire retardant as well as the kevlar chin strap, so the RaceQuip PRO15 Side Air Helmet is suitable for use in all forms of motorsports. The comfort fit blended Nomex® interior along with exhaust vents on the top and back of the shell help keep your scalp cool.  All these features are wrapped in a stylish aero design hand laid FRP shell with a medium sized chin spoiler and the result is the outstanding value delivered by the RaceQuip PRO15 Side Air helmet. 

Features and Specification:

  • Exceeds Snell SA2015 Rating - Sticker Inside
  • Fiber Reinforced Polymer (FRP) Shell 
  • HANS / HNR M6 Threaded Inserts In Shell
  • Air Inlet Is Standard 1.250" Round Barb Fitting
  • Air Is Routed Left To Right Across Faceshield 
  • Expanded Polystyrene (EPS) Liner
  • Comfort Fit Blended Nomex® Interior
  • HANS Anchor Posts Bolt Right On (not incl.)
  • Distortion Free 3mm Polycarbonate Shield
  • Aluminum Pivot Kit W/Adjustable Friction Lock
  • Tear-Off Posts Hand Ratchet To Eight Positions
  • Silicone Eyeport Gasket Seals Out Dirt 
  • Kevlar® Chin Strap
  • Great Peripheral Vision
  • Fire Retardant Paint and Interior
  • Slick Aero Design With Chin Spoiler
  • Available in Gloss White and Flat Black
  • Stocked in Sizes S - 2XL
Racequip
Part #: RQPRO15FFAIRW
Price: $269.95 (USD) 
Direct Ship
RaceQuip Matrix VESTA15 SA/FIA Full Face Helmets - Pearl White

The Matrix and Carbon Fiber models of the RaceQuip VESTA15 helmet feature ultra-lightweight Kevlar and/or Carbon Fiber construction. The Matrix model is hand laid using high-strength Kevlar fabric along with a durable epoxy resin to assure a lightweight shell with a superior finish.

If you are looking for something even lighter, the Carbon Fiber VESTA15 is hand laid utilizing alternating layers of Kevlar and Carbon Fiber to achieve a super light, yet rigid, shell. The helmet is clear coated to give it a deep gloss finish that really showcases the Carbon weave.

Both the Matrix and Carbon Fiber VESTA15 models are certified to both Snell SA2015 and FIA 8859 standards. This dual certification assures that these helmets can be used in most any motorsports event worldwide.

RaceQuip's VESTA15 full face helmet is a bold departure from traditional auto racing helmet styling. The VESTA15 incorporates contemporary design with modern production techniques to achieve a balance between light weight and affordability. This innovative new helmet model features a hand laid shell in either Kevlar (Matrix) or Carbon Fiber construction with a uniquely shaped chin bar to support a scalloped faceshield design. The reinforced M6 threaded HANS / Forward Head Restraint inserts are mated to the shell as is the expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. The distortion free 3mm polycarbonate faceshield features a molded thumb catch, aluminum pivot kit, hand ratcheting TearOff posts, and a silicone eyeport gasket to seal out dust and dirt. A wide eyeport provides good peripheral vision and allows the use of personal eyewear. Additionally, an extra set of thicker cheek pads are included to allow a customized fit. The dual SA and FIA ratings means that the Nomex interior and paint are fire retardant as well as the kevlar chin strap, so the RaceQuip VESTA15 Helmet is suitable for use in all forms of motorsports. The comfort fit blended Nomex® interior along with exhaust vents on the top and back of the shell help keep your scalp cool. All these features are wrapped in a hand laid Kevalr and/or Carbon Fiber shell with aggresive styling. The result is the outstanding value delivered by the RaceQuip VESTA15.

Features and Specifications:

  • Exceeds Snell SA2015 and FIA 8859 - Both Certification Stickers Inside
  • Hand Laid Kevlar / Carbon Fiber Shell
  • HANS M6 Threaded Inserts Installed
  • Expanded Polystyrene (EPS) Liner
  • Comfort Fit Blended Nomex® Interior
  • HANS / FHR Anchor Posts Bolt Right On (not included)
  • Distortion Free 3mm Low Fog Polycarbonate Faceshield
  • Aluminum Pivot Kit W/Adj. Friction Lock
  • TearOff Posts Hand Ratchet To Eight Positions - No Tools Needed
  • Silicone Eyeport Gasket Seals Out Dirt 
  • Kevlar® Chin Strap
  • Extra Cheek Pads Included For Custom Fit
  • Great Peripheral Vision
  • Fire Retardant Paint and Interior
  • Bold New Styling W/Goggle Type Faceshield
  • Available in Pearl White, Gloss Black, and Clear Coated Carbon Fiber
  • Stocked in Sizes S - 2XL
Racequip
Part #: RQMATRIXVFF
Price: $399.95 (USD) 
Direct Ship
RaceQuip VESTA15 Snell SA2015 Full Face Helmets - Pearl White

Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear now is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

RaceQuip's all new VESTA15 full face Snell SA-2015 helmet is a bold departure from traditional auto racing helmet styling. The VESTA15 incorporates contemporary design with modern production techniques to achieve a balance between light weight and affordability. This innovative new helmet model features a hand laid Fiber Reinforced Polymer (FRP) shell and a uniquely shaped chin bar to support a scalloped faceshield design. The FRP used for shell construction is a premium high strength Fiberglass.  

Reinforced M6 threaded HANS/HNR inserts are mated to the shell along with an expanded polystyrene (EPS) liner. HANS or other Head and Neck Restraint device anchor posts (not included) can be easily attached to the outside of the helmet using the installed M6 threaded inserts. The distortion free 3mm polycarbonate faceshield features a molded thumb catch, aluminum pivot kit, hand ratcheting TearOff posts, and a silicone eyeport gasket to seal out dust and dirt. A wide eyeport provides good peripheral vision and allows the use of personal eyewear. Additionally, an extra set of thicker cheek pads are included to allow a customized fit. 

The SA rating means that the Nomex(R) interior and paint are fire retardant as well as the kevlar chin strap, so the RaceQuip VESTA15 Helmet is suitable for use in all forms of motorsports. The comfort fit blended Nomex® interior along with exhaust vents on the top and back of the shell help keep your scalp cool. All these features are wrapped in a hand laid FRP shell with aggresive styling and the result is the outstanding value delivered by the RaceQuip VESTA15. 

Available in Pearl White, Gloss Black, and Flat Black in sizes Small - 2XL

Features and Specifications:

  • Exceeds Snell SA2015 - Sticker Inside
  • Hand Laid Fiber Reinforced Polymer (FRP) Shell
  • HANS M6 Threaded Inserts Installed
  • Expanded Polystyrene (EPS) Liner
  • Comfort Fit Blended Nomex® Interior
  • HANS / HNR Anchor Posts Bolt Right On (not included)
  • Distortion Free 3mm Low Fog Polycarbonate Faceshield
  • Aluminum Pivot Kit W/Adj. Friction Lock
  • TearOff Posts Hand Ratchet To Eight Positions - No Tools Needed
  • Silicone Eyeport Gasket Seals Out Dirt 
  • Kevlar® Chin Strap
  • Extra Cheek Pads Included For Fitting
  • Great Peripheral Vision
  • Fire Retardant Paint and Interior
  • Bold New Styling W/Goggle Type Shield
  • Available in Pearl White, Gloss Black, and Flat Black
  • Stocked in Sizes S - 2XL
Racequip
Part #: RQVESTA15FF1
Price: $349.95 (USD) 
Direct Ship