Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW E63 Sway Bar Kits

BMW E63 Sway Bar Kits The next step in tuning your car's handling - after shocks/springs and camber plates - should be a set of swaybars. Using larger front and rear sway bars will give your car better/quicker turn-in and less bodyroll in corners. These bars replace the existing sway bars on the car for a clean and simple upgrade with very little downside. Sway bars should be matched with your springs/shocks to maintain a proper handling balance. In some cases only a front or rear bar is needed to positively change the balance and make the car more neutral. We sell sway bar kits from H&R, Racing Dynamics, OE BMW upgrades, and even some of our own designs. Swaybars are sold with new bushings. New links and other hardware are strongly recommended.
You're currently viewing parts for your (E63) 6-Series Coupe 2004-2010. Reset your chassis
For accurate results, specify your model below.
E60 M5, E63 M6 Dinan Adjustable Rear Anti-Roll Bar - 21mm

Dinan has engineered this sway bar to work only with their Roll Control System to give the M5/M6 better balance in the corners.

Dinan sway bars are carefully engineered to match the driving dynamics of each BMW chassis. Dinan's research and development finds the ideal balance between improved handling while maintaining a comfortable ride. This set has been fine-tuned for the E90/E92 chassis to reduce bodyroll, improve steering and turn-in response, and reduce understeer. The front bar is hollow tubular steel for light weight with adjustable ends to dial in the handling characteristics. The rear bar is non-adjustable. These are the same sway bars used in Dinan's Stage 1 suspension and work best with Dinan shocks and springs or a similar sport suspension and wider rear tires.

Dinan E60/E63 Sway Bar Specs:
R: 21mm, solid, 3-way adjustable, urethane bushings included

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. Each sway bar is worth 1 point towards your Dinan badge.

This item fits the following BMWs:
2006-2010 E60 BMW M5
2006-2010 E63 E64 BMW M6

Dinan
Part #: D120-0491
Price: $189.52 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
H&R Rear Sway Bar - E60 E63 19mm with 3-position adjustment; bushings included; not for cars with Active Roll Stabilization (ARS)

H&R Sport sway bar / swaybars are crafted from a special (hf) 50CrV4 steel alloy—the highest tensile strength available. The quality of the material and design guarantees smooth transitional sway bar function—decreasing the feedback response time—and increases stiffness over stock. H&R Sport sway bar / swaybars improve a vehicle’s lateral stability and cornerning grip, while reducing body roll.

H&R Sport Sway Bars are precision engineered—designed and manufactured to be strong, resilient, and durable. Adhering to the same manufacturing philosophy as H&R’s world-renowned springs, H&R Sport Sway Bar design and production receives significant attention to detail and commitment. Each sway bar is cold-formed and heat-treated, with forged seamless bar ends. H&R shot-peens the sway bars to increase durability and check for dimensional correctness. At H&R’s ISO9001 certified manufacturing facility in Germany, production is completed in-house and each sway bar must pass a series of rigorous quality control tests to earn H&R’s approval and yours.

Being 100% German made means a commitment to doing it right—giving you the best quality product.

This item fits the following BMWs:
2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i - not for Xi models - not for cars with Active Roll Stabilization / Dynamic Drive
2004+ E63 BMW 645ci 650i - not for cars with Active Roll Stabilization / Dynamic Drive
H&R
Part #: 71460
Price: $262.95 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
E60 M5, E63 M6 Dinan Roll Control/Sway Bar Package

Dinan has a unique approach to fine-tuning the handling of the E60 M5, E63 M6 - to improve handling and not impact ride comfort they have engineered a way of stiffening the stock front sway bar while replacing the rear bar with a slightly larger bar. Instead of the traditional larger sway bar Dinan has come up with this way of stiffening the stock front bar. They have relocated the attachment point for the link to be further away from the end - effectively shortening the bar and making it stiffer. This has a number of advantages over a thicker aftermarket bar: lower cost, the bar does not have to be removed, no tradeoff in ride comfort. Dinan's research and development finds the ideal balance between improved handling while maintaining a comfortable ride. This set has been fine-tuned to reduce bodyroll, improve steering and turn-in response, and reduce understeer. This is the same setup as used in Dinan's Stage 1 suspension and work best with Dinan shocks and springs or a similar sport suspension and wider rear tires.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This setup is worth 2 point towards your Dinan badge.

The installation on the front bar requires drilling a hole on each end of the bar. The drilling and installation of the relocating bracket can be done with the sway bar still on the car. Detailed installation instructions are included.

This item fits the following BMWs:
2006-2010 E60 BMW M5
2006-2010 E63 E64 BMW M6

Dinan
Part #: E60M5-D120
Price: $400.67 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
H&R Front Sway Bar - E60 E63 27mm with 2-position adjustment; bushings included; not for cars with Active Roll Stabilization (ARS)

H&R Sport sway bar / swaybar / swaybars are crafted from a special (hf) 50CrV4 steel alloy—the highest tensile strength available. The quality of the material and design guarantees smooth transitional sway bar function—decreasing the feedback response time—and increases stiffness over stock. H&R Sport Sway Bars improve a vehicle’s lateral stability and cornerning grip, while reducing body roll.

H&R Sport Sway Bars are precision engineered—designed and manufactured to be strong, resilient, and durable. Adhering to the same manufacturing philosophy as H&R’s world-renowned springs, H&R Sport Sway Bar design and production receives significant attention to detail and commitment. Each sway bar is cold-formed and heat-treated, with forged seamless bar ends. H&R shot-peens the sway bars to increase durability and check for dimensional correctness. At H&R’s ISO9001 certified manufacturing facility in Germany, production is completed in-house and each sway bar must pass a series of rigorous quality control tests to earn H&R’s approval and yours.

Being 100% German made means a commitment to doing it right—giving you the best quality product.

This item fits the following BMWs:
2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i - not for Xi models - not for cars with Active Roll Stabilization / Dynamic Drive
2004+ E63 BMW 645ci 650i - not for cars with Active Roll Stabilization / Dynamic Drive
H&R
Part #: 70460
Price: $278.95 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity: