Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW E63 Oil Filters & Oil Filter Kits

BMW E63 Oil Filters & Oil Filter Kits What is more important to your engine than its oil supply? You can change your oil as many times as you want but if you don't change the oil filter you might as well dump the old oil back in! Replace your oil filter with every oil change (per BMW's recommendation) and you'll never worry about dirty oil again. We supply filters from the OEM Suppliers to BMW - Mahle, Mann, or OE BMW.
You're currently viewing parts for your (E63) 6-Series Coupe 2004-2010. Reset your chassis
For accurate results, specify your model below.
Genuine BMW Oil Drain Plug - N62 N63 4.4L 4.8L

This genuine BMW replacement oil drain plug is perfect to replace your old beat up or stripped oil plug for easy removal and oil changes.


Genuine BMW Screw Plug
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E53 48IS,E38,E39,E53 X5 X5,E63,E65,E70 X5,E71 X6,F01,F02,F06,F10,F12,F13,F15,F16

Genuine BMW
Part #: 07119905428
Price: $5.54 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Genuine BMW Oil Drain Plug with Sealing Washer - N62 N63 4.4L 4.8L

This genuine BMW replacement oil drain plug with washer is perfect to replace your old beat up or stripped oil plug for easy removal and oil changes.


Genuine BMW Screw Plug
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E53 48IS,E38,E39,E53 X5 X5,E63,E65,E70 X5,E71 X6,F01,F02,F06,F10,F12,F13,F15,F16

Genuine BMW
Part #: 07119905428KT
Price: $6.37 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Genuine BMW Oil Drain Plug with Washer - S54 S65 S85

This genuine BMW replacement oil drain plug with washer is perfect to replace your old beat up or stripped oil plug for easy removal and oil changes.

 

Fits the following BMW engines:
S54, S65, S85

Genuine BMW
Part #: 07119904550
Price: $3.90 (USD) 
In Stock
Quantity:   
Oil Filter Housing Cap - E60 E63 E65 E53 E70 With N62 /n73 Engine Replace your stripped or damaged oil filter cap with this Genuine BMW part. The oil filter cap on N62 and N73 engines is made of black plastic and can become cracked or stripped when replacing the oil filter.

This item fits the following BMWs:
2004-2010 E60 BMW 545i 550i
2004-2010 E63 BMW 645ci 650i
2002-2008 E65 BMW 745i 745li 750i 750li 760i 760li
2004-2006 E53 BMW X5 4.4i X5 4.8is
2007-2013 E70 BMW X5 4.8i X5 xDrive48i
Genuine BMW
Part #: 11427521353
Price: $38.67 (USD) 
$44.98 (14% off MSRP)
Ships in 5 days
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
OEM Oil Filter - E60 550i, E63 650i, E65 750i,760i E70 X5 4.8i This is an OEM oil filter for the N62 V8 engine includes the filter, seal and o-ring.

This item fits the following BMWs:
2006-2010 E60 BMW 550i
2006-2010 E63 BMW 650i
2005-2008 E65 BMW 750i 750li 760i 760li
2007-2013 E70 BMW X5 4.8i X5 xDrive48i
Mann
Part #: 11427542021
Price: $11.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
K&P Engineering High Performance Stainless Steel Micronic Oil Filter - S65 S85

Stainless steel filtration is not a new technology but is quickly gaining popularity in the automotive segment. With the ability to filter down as small as a paper filter element with the ability to be washed and reused!

The K&P Engineering filter element is made from medical grade, type 304 stainless steel micronic filter cloth to provide unmatched protection against oil contamination and resultant engine damage. A one inch square of this material flows an incredible 1.9 gallons of oil per minute at only 1 PSI pump pressure. The adhesive used in the filter assembly process is good to 600 degrees Fahrenheit, far above normal engine operating temperatures. A super strength nickel-plated neodymium rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil. The sophisticated bypass is engineered for proper differential pressures and consistent operation, delivering a greater percentage of filtered oil while being very easy to clean. The twist lock design assures positive filter element placement and allows for easy disassembly, inspection, and cleaning. The quad-ring gasket doubles the seal between the filter and the engine. Finally, the filter housing is carved out of solid 6061T6 billet aluminum, which not only looks trick but aids in dissipating heat.

K&P Engineering manufactures stainless steel filters for a vast array of engines around the world. Staying at the forefront of design and testing allows this company to offer a top-tier product for your European vehicle.

Features:

  • Consistent filtering across entire filter surface
  • Superior ASTMF316 filtration performance
  • Magnetic Prefiltering
  • Progressive rate bypass combined with high flow characteristics of the filter media avoids unfiltered oil bypassing the filter during cold startup and high rpm
  • Easy inspection of engine contamination
  • Proven in Motorsports, Military and Aerospace applications for years. Technology is FAA approved for use in aircraft. 

At regular oil changes, clean to K&P's specifications for continued used - a true lifetime filter.

 

Watch to learn how to clean a K&P oil filter

 

This part fits the following BMWs:
2006 - 2010 E60 M5 Sedan
2006 - 2010 E63 M6 Coupe & Convertible
2008 - 2013 E90 M3 Sedan
2008 - 2013 E92 M3 Coupe
2008 - 2013 E93 M3 Convertible

K&P Engineering
Part #: S39
Price: $119.00 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Genuine BMW Oil Travel Case for 1 liter Bottle This Genuine BMW oil travel case is perfect for holding a 1 liter /1 quart oil bottle for topping up between oil changes. The case has 3 velcro strips on the back to secure the case inside of the trunk. Case includes 2 hand wipes, 2 laminated cardboard funnels, 2 plastic gloves, and 2 cleaning cloths.
Genuine BMW
Part #: 83292158848
Price: $5.79 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
OEM Mahle/Mann Oil Filter - E60 M5, E63 M6 V10 This is a high quality German made OEM oil filter for all BMW V10 engines, including 2006, 2007, and newer M5 and M6. It includes any seal reals required.

This oil filter fits the following BMWs:

2006+ E60 M5
2006+ E63 M6
Mann
Part #: 11427834734
Price: $13.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
OEM Hengst Oil Filter - 2004 & 2005 V8 (4.4L N62) Replacement oil filter kit for 4.4L N62 V8 engines, as found in 2004, 2005 V8 model BMWs.

This oil filter fits the following BMWs:

2004-2005 E60 5 Series - 545i
2004-2005 E63/E64 6 Series - 645Ci, 645Ci convertible
2002-2005 E65/E66 7 Series - 745i, 745Li
2004-2005 X5 SAV V8 incl X5 4.4, X5 4.8is
Hengst
Part #: 11427511161
Price: $9.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity: