click to Chat Live
Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart
Home
Categories
Specials Gifts & Clothing
  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages
Brakes
  1. Brake Overhaul Packages
  2. Brake Pads
  3. Brake Pad Sensors
  4. Brake Rotors
  5. StopTech Big Brake Kits
  6. Brembo Big Brake Kits
  7. Stainless Steel Brake Lines
  8. Brake Fluid
  9. Brake Calipers
  10. Caliper Rebuild Kits
  11. Parking Brake Parts
  12. Brake Master Cylinders
  13. ABS/DSC System Parts
  14. Brake Cooling Ducts & Backing Plates
  15. Brake Pads - Brembo GT BBK Calipers
  16. Brake Pads - StopTech BBK Calipers
Car Care & Accessories
  1. Car Covers
  2. Wheel & Tire Cleaning
  3. Wax, Polish and Cleaning Supplies
  4. Detailing Gear
  5. Leather & Plastic Care
  6. Car Cleaning Supplies
  7. Chassis Paint, Coatings, Sealants, and Rust Conversion
Drivetrain
  1. Differential and Gearing Upgrades
  2. Differential Mounts and Upgrades
  3. OEM Clutch Kits & Clutch Parts
  4. Performance Clutch Kits & Parts
  5. Stock OEM Dual Mass Flywheels
  6. Stainless Steel Clutch Lines
  7. Clutch Parts
  8. UUC Short Shift Kits
  9. Axle Shafts
  10. Driveshafts
  11. Performance Short Shift Kits
  12. Drivershaft Center Support Bearings
  13. Flex Discs & Guibos
  14. Transmission Mounts
  15. Transmission Parts
Engine Chips
  1. Performance Flash Software, 2005+ Models
  2. Sprint Booster Drive-by-Wire Module
  3. Stand-Alone Engine Management
Engine Parts
  1. Engine Performance Packages
  2. Water Pumps
  3. Thermostats
  4. Radiators & Cooling System Overhaul Kits
  5. Radiator Hoses, Cooling Hoses, & Hose Sets
  6. Underdrive Power Pulleys
  7. Schrick Performance Camshafts
  8. External Engine Parts
  9. Drive Belts & V-Belts
  10. Gaskets, Gasket Sets, Seals, & O-Rings
  11. Crankcase Vent, PCV, and Oil Separator Systems
  12. Motor Mounts
  13. Electrical Sensors, Switches, & Relays
  14. Ignition Parts
  15. Alternator & Alternator Parts
  16. Starter Motors & Starter Parts
  17. Fuel System Parts
  18. Internal Engine Parts
  19. Cylinder Head Parts & Head Bolts
  20. VANOS Units & Parts
  21. Rod Bearing Kits
  22. Oil Coolers & Oil Cooler Parts
Exhaust
  1. Supersprint Performance Exhaust Systems
  2. Performance Headers & Downpipes
  3. Dinan Free Flow Exhaust Systems
  4. Performance Exhaust Systems
  5. Oxygen Sensor - O2 Sensors
  6. Exhaust Gaskets Hangers and Parts
Exterior / Body
  1. Black Grills
  2. Emblems & Decals for Hood, Trunk, and Wheels
  3. Front Spoilers, Bumper Covers, & Air Dams
  4. Rear Spoilers, Rear Wings, & Aprons
  5. Body Trim Parts & Accessories
  6. License Plate Brackets & License Plate Frames
  7. Mirror Kits & Mirror Parts
  8. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  9. Hood Pins and AeroCatch Latches
  10. Racing Tow Hooks and Tow Straps
Intake
  1. aFe Cold-Air Intake Kits
  2. Turbos & Active Autowerke Superchargers
  3. Dinan Cold Air Intake Kits
  4. Gruppe M Cold-Air Intake Kits
  5. Performance Intake Kits
  6. aFe Performance Air Filters
  7. K&N Performance Air Filters
  8. Intake Cleaning & Recharging Kits
  9. Intake Manifold Components (DISA, Vacuum, CCV, Etc)
  10. Mass Air Sensor & Air Flow Meters
  11. Throttle Body Parts
Interior
  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. Racing Steering Wheels
  7. Shift Knobs, Shift Boots, & Shift Handles
  8. Seats & Seat Accessories
  9. Seat Belts and Racing Harnesses
  10. Carbon Fiber Interior Parts
  11. Door Sill Strips
  12. Heating & Air Conditioning
  13. Interior Switches and Switchgear
  14. Sunshades & Windscreens
  15. Interior Trim & Accessories
Lighting
  1. Turn Signals / Parking Lights
  2. Angel Eye Headlight Conversions
  3. Bulbs for Headlights, Turn Signals and Tail Lights
  4. Headlights, Headlight Lenses, & Headlight Parts
  5. Fog Lights, Fog Light Lenses, & Fog Light Parts
  6. Stealth Bulbs
Maintenance
  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Fuel Filters
  5. Cabin Air Filters, Heppa Filters, & Microfilters
  6. Transmission Filter Kits & Transmission Service Parts
  7. Ignition Coils
  8. Spark Plugs
  9. Service Reset Tools & Fault Code Readers
  10. Anti-Freeze and Coolant
  11. Engine Oils - Genuine BMW and OEM
  12. Power Steering and Hydraulic Fluids
  13. Transmission and Gear Oil - Genuine BMW and OEM
  14. MOTUL Engine Oil and Gear Lubricants
  15. Red Line Oil & Fluids
  16. Liqui-Moly Oil and Additives
Suspension
  1. Shocks & Struts
  2. H&R Performance Springs
  3. Spring & Shock Packages
  4. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  5. H&R Coil Over Suspensions
  6. KW Coil Over Suspensions
  7. Moton Coil Overs & Race Shocks
  8. Sway Bar Kits
  9. Sway Bar Links & Sway Bar Parts
  10. Camber / Caster Kits
  11. Strut Braces & Stress Bars
  12. Control Arm Replacements & Upgrades
  13. Suspension Bushings & Mounts
  14. Wheel Bearings & Hub Assemblies
  15. Steering Racks & Power Steering Pumps
  16. Tie Rods & Steering Parts
  17. Coil Over Spring Hardware
  18. CATuned Coilover Kits
Wheels
  1. Apex Flow Formed Alloy Wheels
  2. Forgeline Custom Forged Alloy Wheels
  3. D Force Flow Formed Alloy Wheels
  4. Alpina Alloy Wheels
  5. Original BMW Wheels and Wheel Upgrades
  6. Turner Motorsport Wheel Spacers
  7. ECS Tuning Wheel Spacers
  8. H&R Wheel Spacers
  9. Wheel Bolts, Wheel Studs and Nuts
  10. Wheel Emblems, Caps, and Accessories
Tools
  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Coil Over Wrenches
  5. Cooling System Tools
  6. Cylinder Head and VANOS Tools
  7. Exhaust Tools
  8. Fan and Fan Clutch Tools
  9. Fault Code Readers and OBD Scan Tools
  10. Fuel System Tools
  11. Genuine BMW Tool Kits
  12. Oil Service Tools
  13. Sockets
  14. Spark Plug Sockets
  15. Transmission and Differential Tools
  16. Wheel Pin Tools
  17. Workshop Chemicals
Clearance
Choose BMW
BMW 1 Series
  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+
BMW 2 Series
  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+
  3. (F87) M2 2016+
BMW 3 Series
  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+
  18. (F34) 3-Series Gran Turismo 2014+
BMW 4 Series
  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2015+
  3. (F34) 4-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+
  6. (F36) 4-Series Gran Coupe 2015+
BMW 5 Series
  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+
  10. (G30) 5-Series 2017+
BMW 6 Series
  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Coupe 2011+
  6. (F13) 6-Series Convertible 2011+
BMW 7 Series
  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+
BMW 8 Series BMW Classics (E9, Bavaria, Isetta, etc)
  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978
BMW X Series (SAV)
  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+
  12. (F48) X1 2016+
  13. (F48) X1 (2016+)
BMW Z Series
  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003
BMW 1600-2002 / tii BMW i Series
  1. (I01) BMW i3 2014+
  2. (I12) BMW i8 2014+
MINI Cooper and Cooper S
Racing
Racing Home Racing News Racing Schedule Racing Photo Gallery
Gallery
Photo Gallery Wallpaper Project Cars
  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone
Video Gallery
Projects
Turner BMW i8 Turner BMW F80 M3 Turner BMW F82 M4 Turner BMW X5 M Turner BMW F22 2 Series Turner BMW F13 M6 Turner BMW F10 M5 Turner BMW F30 335i Turner BMW E9X M3 Turner BMW E92 335i Turner BMW E82 1 Series Turner BMW ActiveE (100% Electric) Turner BMW E46 M3 Turner BMW E46 330i ZHP Turner BMW E36 M3 Turner BMW E30 M3 Turner MINI Cooper S McLaren F1 Turner BMW E92 M3 Lime Rock Turner BMW F80 M3 Silverstone
About Us
About Turner Motorsport Customer Feedback The Turner Team
  1. Open Positions
Returns Policy Shipping Info Contact Us Privacy Policy Security Policy FAQs

BMW E63 Specials, Deals & Discounts

You're currently viewing parts for your (E63) 6-Series Coupe 2004-2010. Reset your chassis
For accurate results, specify your model below.
ECS Tuning Wheel Spacers - 12.5mm - 72.6mm CB

Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

 

This item fits the following BMWs:

2008-2012 E82 BMW 128i 135 1M
1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Rear Only
2007-2013 E70 BMW X5M
2007-2014 E71 BMW X6 xDrive35i X6 xDrive50i X6M

Part #: ECS#254KT
Price: $67.96 (USD) 
$79.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 17mm Allen Socket - 1/2

Always have the right tools for the job, this 17mm hex head driver is perfect for BMW manual transmission plugs and some axle shafts.

Features:

  •  large ½-inch drive socket 
  • Made of durable chrome vanadium steel

 

 

Part #: HS-1217H55
Price: $9.71 (USD) 
$12.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Torx Screwdriver Kit - 6 Pieces

Torx® screwdriver set includes six common bit sizes, perfect for removing door and dashboard panels, interior trim, and smaller underhood components.

Features:

  • Hardened tips have center hole for use with both standard or tamper-proof Torx fasteners 
  • Large grips add comfort and leverage
  • Handle through-holes make them easy to hang from pegboard hooks
  • Entire kit packaged in a convenient molded case.
  • Sizes include: T10, T15, T20, T25, T27, and T30.
Part #: sd-t6pcs
Price: $22.46 (USD) 
$29.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Trim/Moulding Tool Kit - 5 Pieces

Plastic five-piece tool kit removes trim and door panels, moldings, and adhesive backed logos and badges, without damage. By using a non-marring plastic you can safely and easily remove trip pieces with confidence

 

Features:

  • Pull-type remover

  • Narrow edge remover

  • Wide edge remover

  • Handle remover

  • Upholstery clip remover

Part #: PHR-05s
Price: $11.21 (USD) 
$14.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 30mm 12-Point Deep Socket, 1/2

This large socket is the perfect tool for axle nuts when servicing the axle shafts or wheel bearings.

Features:

  • ½-inch drive 30mm 12-point socket
  • 75mm depth  to accommodate many applications and different length shafts
  • Made of durable chrome vanadium steel

 

  • E36 3 series (1992-1999) -- no M3
  • E46 323/325 (1999-2005) -- no 330/M3
Part #: S-1230S
Price: $14.96 (USD) 
$19.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Pocket Brake Fluid Tester

It is necessary to check the moisture content of your brake flluid beacuse brake fluid is hygroscopic, meaning it readily absorbs moisture. Over a period of time moisture will cause brake fluid to degrade. Once brake fluid reaches a certain level the brake fluid is no longer able to function properly in the brake hydraulic systems. 

This Schwaben Brake fluid tester has a green, yellow and red light that represent's moisture content of DOT 4 brake fluid to determine if service is needed.

Features:

  • Green LED, H2O level is <1.5% = OK
  • Yellow LED, H2O level is 1.5 to 3% =Replace soon
  • Red Led, H2O level is >3% Replace Immediately
  • Auto-off function
  • Bright Led Flashlight 
  • One AAA battery operation- not included

 

Part #: 015745SCH01A
Price: $19.46 (USD) 
$25.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Turner Motorsport Lanyard Turner Motorsport Lanyard - Perfect for wearing your pit pass to the race, or just hanging your keys on.
Part #: TMS-LANYARD-02
Price: $7.61 (USD) 
$8.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 6mm Hose Clamp Flexible Driver

Makes those hard to reach hose clamps much easier to loosen up.

Features:

  • 6mm driver
  • 6"  flex shaft
  • Overall length of 10-1/2"
  • No-slip grip resistant to wet or oil coated hands

 

Part #: 010658SCH02A
Price: $8.21 (USD) 
$10.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 46 Piece 1/4

The perfect kit containing most of your needed European essentials. 

Features:

  • 13PCS-1/4" DR.6PT SOCKETS: 4, 4.5 , 5 ,5.5 ,6 , 7, 8 ,9 ,10, 11, 12, 13, 14MM 
  • 1PC- 1/4" DR. QUICK RELEASE RATCHET (72T).
  • 2PC- 1/4" DR.50 & 100MM EXTENSIONS 
  • 1PC- 1/4" DR.150MM FLEXIBLE EXTENSION
  • 1PC- 1/4" DR.UNIVERSAL JOINT
  • 1PC- 1/4" DR.SLIDING T-BAR
  • 1PC- 1/4" DR.6" SPINNER HANDLE
  • 1PC- 1/4" DR.1/4" BIT HOLDER ADAPTER
  • 4PCS-HEX KEY WRENCHES:1.27, 1.5,2,2.5MM
  • 6PCS-1/4" HEX SOCKETS:3,4,5,6,7,8MM
  • 3PCS-1/4' SLOTTED SOCKETS:4,5.5,7MM
  • 3PCS-1/4" PHILIPS SOCKETS:PH1, PH2, PH3
  • 3PCS-1/4"POZI SOCKETS: PZ1, PZ2, PZ3
  • 6PCS-1/4" TORX SOCKETS: T10, T15, T20, T25, T30, T40

Own an E30? This tool kit is a perfect fit for your glovebox!

Part #: 010747SCH01A
Price: $37.46 (USD) 
$49.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Deluxe Transverse Engine Support Bar

When doing work where the mounts and support need to be removed from the engine or transmission having a engine support bar is wise. By using this engine support the stress is coming off of whatever components are still attached reducing future unnecessary repairs. The safety side of it is having the heavy engine and transmission firmly supported as it should be instead of questionable jack techniques.  

 

Features:

  •  2" longer than most
  • Deluxe transverse support for even more stability
  •  Two angle chain hooks for safer and more stable chain support 
  •  61" long and fully adjustable to any width
  •  Weight rating is a full 1000 lbs.
  •  Includes four rubber padded feet to prevent slipping and damage to cars finish 
  • This tool features a dual hook design for holding engine or transmission in place
  •  Powder coated for long life and durability

Note: It is important that chains are hooked to both sides of hook, like in photo to insure load is supported evenly. 

 

Part #: 009595SCH01A
Price: $217.46 (USD) 
$289.95 (Sale - Save 25%)
Quantity:   
Schwaben Black Mechanics Work Gloves - XL

Perfect for any job when it comes to keeping your hands clean and protected.

Features:

  • High dexterity
  • Elastic hook and loop strap
  • Textured latex finger tips for grip
  • Breathable material
Part #: 010337SCH03A
Price: $7.46 (USD) 
$9.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 6

The Schwaben Pistol Grip Locking Pliers, a unique pistol style that is ideal in locations that do not allow the use of regular locking pliers.

Features:

  • The hammer-like lock release is easily pressed in tight locations giving maximum usability to the user
  • Durable, rubberized grip covers provide a comfortable, non-slip grip to ensure your hands have a solid hold at all times
  • Quickly and easily adjust the gate of the jaws for a secure clamp with the easy to use barrel adjuster
Part #: 014565SCH01A
Price: $26.21 (USD) 
$34.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
E63 645ci/650i Supersprint Section 2 X-Pipe with Resonators

Free ground shipping! 

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

NOTE: Supersprint engineers and manufactures complete exhaust systems. This part was designed to be used with the rest of the Supersprint system on this car but may be used on its own. Contact us for more details.

Part #: 788503
Price: $932.98 (USD) 
$1243.97 (Sale - Save 25%)
Free Shipping Free Shipping
Quantity:   
Turner Motorsport Rear Deck Emblem / Badge TMS is proud to offer our own rear deck emblem, constructed out of the highest quality injection molded ABS plastic, then chrome plated and bonded to an OEM automotive grade adhesive backing. It perfectly accentuates the rear of your BMW and blends in flawlessly with the factory badges. Our badge measures 5" (127mm) x 1.1" (28mm) – similar to the dimensions on many of the factory badges.
Part #: TMS1622
Price: $21.21 (USD) 
$24.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Upper Spring Hats/Perches (Pair) - 2.5 Inch / 16mm Pin / Tapered Seat Made in the USA These aluminum upper spring hats are for coil over struts with a 2.5" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

Spring I.D.Strut Pin Diam.Strut Pin Seat
2.5"16mmtapered

Part #: TSU9980550
Price: $50.96 (USD) 
$59.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Turner Motorsport Key Chain Add some blue and yellow jewelry to the key of your BMW. This sleek key ring pendant is made from high-quality stainless steel with colored Turner logo inlay and will look good paired with any BMW key whether it's a classic 2002 or a brand new M4.
Part #: TMSKEYCHAIN
Price: $8.46 (USD) 
$9.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
E63 M6 Supersprint Stainless Left Racing Muffler

Free ground shipping! 

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

NOTE: Supersprint engineers and manufactures complete exhaust systems. This part was designed to be used with the rest of the Supersprint system on this car but may be used on its own. Contact us for more details.

Part #: 044736
Price: $669.71 (USD) 
$892.95 (Sale - Save 25%)
Free Shipping Free Shipping
Quantity:   
E63 645ci Supersprint Right Performance Muffler (1 120x80mm Tip)

Free ground shipping! 

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

NOTE: Supersprint engineers and manufactures complete exhaust systems. This part was designed to be used with the rest of the Supersprint system on this car but may be used on its own. Contact us for more details.

Part #: 788505
Price: $592.16 (USD) 
$789.55 (Sale - Save 25%)
Free Shipping Free Shipping
Quantity:   
KBS Auto Gold Standard Fuel Tank Sealer Kit KBS Fuel Tank Sealer Kit contains all of the essential products to completely clean, treat, and seal a 25-gallon automotive fuel tank. The complete kit is formulated to stop fuel tank rust in its tracks and then coat and seal the tank, including filling small pinholes and weld seams. The final coating is impervious to fuels, alcohol additives, and most solvents. It's a tough ceramic-like barrier against future corrosion.

KBS Fuel Tank Sealer Kit includes:
+ KBS Klean - for 'washing' and stripping away other chemicals and foreign particles
+ KBS Blast - dissolves rust and metal oxides and converts it to a zinc phosphate that is ready for coating
+ KBS Gold Standard Tank Sealer - brushable coating that leaves a rock-hard ceramic-like coating that is very resistant to salt and chemicals
+ Chemical-resistant black nitrile gloves
+ Brushes and stirring stick
+ Detailed instructions

Step 1. Klean. The KBS process involves first treating and prepping the rusty area before the final coating is applied. The surfaces must first be cleaned with the KBS Klean to strip away grease and other chemicals that will interfere with coating adhesion. Klean is water based and biodegradable and doesn't have the harsh smells and effects of solvents or chemicals. Let Klean soak but rotate the tank every minutes to ensure complete coverage. The cleaner the tank the better the adhesion so repeat until you're satisfied. The Klean process should be left to completely dry before moving to Step 2.

Step 2. Blast. Rust Blast is the actual conversion of rust into zinc phosphate state and is etched for proper paint adhesion. This step is essential for stopping the rust in its tracks and from spreading. It's also a primer for the final stage of coating, leaving behind a white powdery residue. Like the Klean it's also water based and biodegradable. For the rust conversion to be complete pour the Blast into the tank and rotate several times to ensure coverage. Rinse and allow to dry completely before sealing.

Step 3. Tank Seal. For the finishing touch, pour the KBS Tank Sealer into the tank. The Sample kit includes enough coating for a 25-gallon tank and it's formulated to be applied as a single coat. Rotate the tank to ensure complete coverage and drain the excess. It's important to not allow the Tank Seal to pool or collect so make sure it drains well. Use any excess to coat and seal the outside of the tank, especially in areas that might have leaks. Tank Seal leaves a very tough and hard surface that is impervious to most solvents, fuels, acids, and road salt. When fully cured it's flexible, allowing it to move as the tank expands and contracts. It's self-leveling too which produces an even finish that will not crack, flake, or peel and will withstand temperatures up 600*F (316*C).

Application note: The KBS process will need approximately one week to fully complete (the recommended drying time on the tank is four days). This is perfect for restoration jobs or longer builds where the car can sit for an extended period of time.

Installation Instructions

In order for the 3-step process to work correctly, you must closely follow KBS' instructions. You can view/download them here prior to receiving your order:
For a PDF of the installation instructions, click here.

Demonstration Videos


KBS Tank Seal Process -
KBS Klean and KBS Blast

KBS Tank Seal Process -
KBS Tank Seal

Due to shipping restrictions, this product can ship only via UPS Ground.
Part #: 53000
Price: $56.06 (USD) 
$65.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
StopTech Street Performance Brake Pads - Front - E60 M5, E63 M6 StopTech Street Performance front brake pads are designed for high-performance street drivers who want a high-quality and capable pad that won't break the wallet. These pads feature an innovative composite compound that is quiet, great bite and modulation, low fade under hard street-type use (and autocross, light track). We've tried these pads and love how capable they were when used hard but also how easy they were for regular stop-and-go driving. This might be the last brake pad you will ever need!

Position: both front calipers

This item fits the following BMWs:
2006-2010 E60 BMW M5
2004-2011 E63 E64 BMW M6
Part #: TMS12165
Price: $156.56 (USD) 
$173.95 (Sale - Save 10%)
Quantity:   
StopTech Street Performance Brake Pads - Rear - E60, E63, E82 1M, E9X M3 StopTech Street Performance rear brake pads are designed for high-performance street drivers who want a high-quality and capable pad that won't break the wallet. These pads feature an innovative composite compound that is quiet, great bite and modulation, low fade under hard street-type use (and autocross, light track). We've tried these pads and love how capable they were when used hard but also how easy they were for regular stop-and-go driving. This might be the last brake pad you will ever need!

Position: both rear calipers (should only be combined with StopTech Street Performance front pads).

This item fits the following BMWs:
2008-2012 E82 BMW 1M Coupe
2006-2011 E90 BMW M3 - Sedan
2007-2013 E92 BMW M3 - Coupe
2007-2013 E93 BMW M3 - Convertible
2004-2010 E60 BMW 535i 545i 550i M5
2004-2011 E63 BMW 645ci 650i M6
Part #: TMS12172
Price: $70.15 (USD) 
$77.95 (Sale - Save 10%)
Quantity:   
Upper Spring Hats/Perches (Pair) - 60mm / 16mm Pin / Square Seat Made in the USA These aluminum upper spring hats are for coil over struts with a 60mm coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

Spring I.D.Strut Pin Diam.Strut Pin Seat
60mm16mmsquare

Part #: TSU998063B
Price: $50.96 (USD) 
$59.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben GT80 Plus Professional Scan Tool Tablet Platform

The GT80 PLUS by Schwaben is extremely easy to set up and even easier to use. It features a genuine Windows 8.1 operating system, Intel quad-core processor and a 10.1” LED capacitive touch display – making it your fastest, easiest solution to attaining valuable data.

This scan tool offers an amazing UI experience, giving users the ability to update with one touch, and easily navigate through menus. With the diagnostic tool connected to the vehicle’s OBD port, it automatically retrieves the VIN code. Additionally, you can manually enter the VIN to identify the model you are working on.

GT80 PLUS automatically checks and recognizes all available electronic control units on a vehicle in a matter of seconds. In addition, it instantly displays all the errors detected on the vehicle, and allows errors to be viewed and cleared with just a single click.

What is the GT80 Plus capable of?

● Compatible with current model vehicles

● Compatible with both OBDI and OBDII cars, SUVs, minivans, light-duty trucks sold worldwide

● Get access to powertrain, chassis and body systems

● Quick Test function to test most vehicle systems

● Read and clear diagnostic trouble codes and resets MIL

● View live vehicle sensors data in a text, graph and gauge format

● Merge interactive live sensor graphs for easy and intuitive diagnosis

● Live data self-learning and alarm when live data over range

● Record and playback your data logs for offline analysis

● Read and clear freeze frame data

● Run component/system bi-directional tests

● Support adaptations and control module coding

● Key coding for several vehicles

● Support the most commonly required service features like brake deactivation, service resets, and transmission adaptations

● Multi-language menus and code definitions for an international marketplace

● Code troubleshooters provide you faster and easier diagnosis

GT80 PLUS Features Actuations, Adaptations and Control Module Coding

GT80 PLUS cannot only read your codes, but it can also actuate components, run system tests, program control modules. Reading the trouble codes from your vehicle is easy. But without live data, bi-directional controls and other special functions, you may not have enough information to get the problem fixed right. It allows you to use the scan tool temporarily activate or control a vehicle system or component. With GT80 PLUS, the check of electronic components such as switches, sensors, relays, & actuators is made a simple task, saving your time and labor costs. It gives you the ability to ‘flash’ a control unit with new program data. Provided that a module can be re-coded, GT80 PLUS allows for the coding and programing of a replacement control module or changing previously stored incorrect coding as expensive factory tools do. In addition, it lets you recode the transponder in a mechanical key or key FOB. When a key for a modern vehicle is replaced, the new unit will often turn the mechanical switch but fail to initialize the system or start the vehicle. If this occurs, it is typically because the transponder inside the key has not been coded to that particular system.

With these factory tool like functions, GT80 PLUS is an invaluable tool that allows you to perform complicated repairs faster and easier, boosting your bottom line and customer satisfaction.

GT80 PLUS shows live vehicle sensors data in text, graph and gauge format and allows you to focus on any suspicious or symptom-specific data parameters. It’s powerful graphing capability gives you the ‘real picture’ of what’s going on in the vehicle. You can view up to 4 parameter graphs simultaneously.  Still you can merge multiple PID plots into one coordinate, so you can easily see how they affect each other, providing you with the most comprehensive and functional look at live data possible.

ã¢â‚¬â¢         USA Coverage

Chrysler,Ford,GM,Brazilian GM(For Brazilian Market Only)

ã¢â‚¬â¢         ASIA Pacific coverage

Au Ford (For Australian Market Only), Acura, Brilliance, BYD, Chery, Daewoo, Geely, Great Wall, Honda, Holden (For Australian Market Only), Hyundai, Infiniti, Isuzu, JAC, Kia, Lexus, Mazda, Mitsubishi, Nissan, Perodua, Proton, Scion, Subaru, Suzuki, Toyota

ã¢â‚¬â¢         European Coverage

Audi, Bentley, BMW, Bugatti, EU Ford, Jaguar, Land Rover, Maybach, Mercedes Benz, Mini, Opel, Porsche, Rolls-Royce, Saab, Seat, Skoda, Smart, Sprinter, Vauxhall, Volvo, VW

ã¢â‚¬â¢         French & Italian Coverage

Abarth, Alfa-Romeo, Citroen, Dacia, Fiat, Lancia, Maserati, Peugeot, Renault

Note: GT80plus has 18 months free updates after registration.

Tool must be registered to receive update notices.  

This scan tool works with all OBD I and OBD II BMW vehicles.

 

Part #: gt80plusKT
Price: $1699.95 (USD) 
$1999.95 (Sale - Save 15%)
Free Shipping Free Shipping
Quantity:   
Tire Totes Wheel Felts

Benefits:

  • Protects rims from knicks and scratches
  • Additional level of protection from tire and brake residue for your cloths and vehicle interior
  • One size fits all Tire Tote bags
  • Durable .25" thick felt pad
  • Easy to install
  • Large ventilation hole


Kit Includes: - Two Wheel Felts
If you wish to protect both front and back of thewheel buy one kit per wheel, if you only want to protect the front face ofwheel, buy one kit per pair of wheels.
(Tire Totes sold separately)

Dimensions:
 • 
1/4" x 20"
 • 
Fits with Tire Tote product
 
  (22" through 29" tire)

Part #: 00037
Price: $28.86 (USD) 
$33.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Stealth Bulb Set -Single Filament Front/ Rear for BMW with Offset Pins Stealth Bulb Set -Single Filament Front & Rear for BMW with Offset Pins. These are the are the best concealment bulbs on the market; invisible in clear lenses when off and bright amber when on. No more ugly orange egg yolk look in your clear corners. Check your stock bulb and compare to photo before ordering.
Part #: TMS3658
Price: $25.46 (USD) 
$29.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
AC Schnitzer Emblem Foil

AC Schnitzer Emblem Foil - ca. 600mm x 113mm - self adhesive vinyl

Schnitzer got it's start racing BMW's in 1967 and has since gone onto win many championships in DTM, WTCC and other touring car series. In 1987 AC Schnitzer started manufacturing custom high performance products for BMW's using their knowledge from years of racing and winning with BMW's. AC Schnitzer offers the highest quality components for your BMW.

Part #: 51141008
Price: $28.88 (USD) 
$44.00 (Sale - Save 34%)
$44.00
Limited Qty Sale
Quantity:   
Tool - Manual Transmission Drain Plug Tool - 17mm To remove the transmission drain plug on a manual transmission requires a special male, hex-drive socket. This BMW drain plug removal tool will fit any 1/2" drive ratchet.
Part #: 143294
Price: $11.86 (USD) 
$13.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Tool - 46mm 3/4 Drive 6-point Socket Commonly used for the removal and installation of front wheel bearings on many BMWs. This socket works with the wheel bearing nut with BMW part number 31 21 1 128 336 -- used with the following front wheel bearings:

Front Wheel Bearings that use 31 21 1 129 336 nut:
BMW part#Fitment / Chassis
31 21 1 468 753E30 M3 (1988-1991), E24 6 ser (thru 1989)
E28 5 ser (1982-1988)
31 22 6 757 024
31 22 1 468 926
E36 3 ser, including M3 (1992-1999)
E46 3 ser, except M3 (1999-2005)
E32 7 ser (1988-1994)
E34 5 ser (11/1991-1995)
E31 8 series (3/1992 on)
31 22 2 229 501E46 M3 (2001-2006)
Part #: TMI9910M46
Price: $58.61 (USD) 
$68.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
E60 M5, E63 M6 Supersprint 70MM Section 1 Straight Pipes

Free ground shipping! 

These pipes fit after the headers and will eliminate the second set of cats in the stock exhaust. You can use these pipes with the stock exhaust headers/cats or with the Supersprint cat-delete downpipes. By deleting the secondary cats you remove a significant blockage in the exhaust flow - increasing horsepower and improving reliability for track or competition cars. You won't have to contend with catalytic material breaking down and clogging your exhaust while you're on the track. Supersprint's dyno testing with this pipe and the rest of their exhaust resulted in a 22hp gain! In addition removing the cats will make the exhaust louder, allowing more glorious V10 magic to be heard! These are the newest Supersprint section 1 pipes with oversized 70mm pipes.

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

 

section:section 1 straight pipes

connects to:stock manifold or Supersprint cat-less downpipes; stock or Supersprint section 2

material:T304 stainless steel


Dyno:


Stock vs. Supersprint:
section 1 cat-delete,
X-pipe, mufflers


Video:


stock headers
Supersprint cat delete front pipes
Supersprint x-pipe
Supersprint mufflers

 

This is a race exhaust system which alters or deletes the emissions equipment on your car, and may not meet emissions standards in all states. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.


This item fits the following BMWs:
2006-2010 E60 BMW M5
2005-2011 E63 BMW M6

Part #: 988812
Price: $700.80 (USD) 
$934.40 (Sale - Save 25%)
Free Shipping Free Shipping
Quantity:   
Genuine BMW Coffee Mug & $100 Turner Motorsport Gift Certificate Special Gift Package! This BMW holiday gift package includes a $100 Turner Motorsport gift certificate (the perfect gift for any BMW enthusiast) and a Genuine BMW ceramic coffee mug. That's essentially a free authentic BMW coffee mug to give for that BMW lover on your shopping list.
Part #: BMW-MUG-100TMS
Price: $100.00 (USD) 
$116.95 (Sale - Save 14%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Belt - Main Drive and A/C Belt Set for Turner Pulley Kit - E60 M5, E63 M6 These are the replacement drive belts used in our Turner Pulley Kit on the S85 V10 engine (E60 M5 and E63/E64 M6). These belts are shorter than the stock belt since our underdrive crank pulley is a larger diameter than stock. Because of the different lengths, you cannot use a stock belt with the Pulley Kit. This set of belts includes the main drive belt (6PK-1400) and the A/C belt (6PK-1045).

This belt set fits the following BMWs with the Turner Pulley Kit:
2006-2010 E60 BMW M5
2004-2011 E63 E64 BMW M6
Part #: E60-M5-UDP-BELTS
Price: $30.26 (USD) 
$35.60 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
StopTech Calipers ST60 - Race Brake Pad Set - Pagid RS29 Yellow Yellow RS 19: Racing A favorite of BMW's Motorsport engineers, the Pagid RS19 compound is an endurance pad based on the RS14 Black but with less friction to improve modulation and low pedal effort. These pads work best in a heat range up to 1,100* F. The combination of friction levels, fade stability, and long life for pads and rotors makes this a favorite for club and HPDE drivers.

This pad set fits the following StopTech 6-piston calipers:
ST60

ST60 calipers are found in many StopTech Big Brake Kits, including these BMW models:
2008-2012 E82 BMW 128i 135i 1M Coupe
1999-2005 E46 BMW M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
2012+ F30 BMW 328i 335i - Sedan
1997-2003 E39 BMW 525i 528i 530i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
2010+ F07 BMW 535i GT, 535i xDrive GT, 550i GT, 550i xDrive GT
2011+ F10 BMW 528i 535i 535i xDrive 550i 550i xDrive M5
2004-2011 E63 BMW 645ci 650i M6
2012+ F13 BMW 640i 650i
2002-2008 E65 BMW 745i 745li 750i 750li 760i 760li
2009+ F01 BMW 740i 740li 750i 750li 750i xDrive 750li xDrive 760li
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2011+ F25 BMW X3 xDrive28i X3 xDrive35i
2000-2006 E53 BMW X5 3.0i X5 4.4i X5 4.6is X5 4.8is
2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive35d X5 xDrive35i X5 xDrive48i X5M
2008+ E71 BMW X6 xDrive35i X6 xDrive50i X6M
2003-2008 E85 BMW Z4 M Roadster M Coupe
2009+ Z4 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Part #: TMS2514
Price: $389.65 (USD) 
$432.95 (Sale - Save 10%)
Free Shipping Free Shipping
Quantity:   
Tool - 32mm / 36mm Fan Clutch and Oil Filter Cap Open-End Wrench Why buy two tools when you can get one that will do many jobs like this open end wrench? It is great for removing and installing the fan clutch and plastic oil filter cap. Also works great for removing and installing the VAN0S solenoid on M50 engine family. Use the same tools the Turner Motorsport techs use!
Part #: TMI9910334
Price: $44.39 (USD) 
$64.95 (Sale - Save 32%)
$64.95
Limited Qty Sale
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Minichamps - Turner Motorsport #94 BMW Z4 GTD 2014 IMSA Champion 1:43 Limited Edition 1 of 300.

Celebrate a piece of Turner Motorsport history with this Limited Edition Minichamps 1:43 resin model of the BMW Z4 GTD which won the 2014 IMSA Tudor United Sportscar Championship!This Z4 GTD was driven by Dane Cameron and Markus Palttala to both the driver and team titles! This car won at tracks such as Laguna Seca, Watkins Glen, Road America and Virginia International Raceway (VIR). Complete with the official livery including sponsors H&R Springs, Northwest, Borla, Escort, Motul, Continental Tires and Recaro. This 1:43rd scale model is extremely detailed and manufactured by the renowned Minichamps.

This limited edition collectors item makes the perfect gift this holiday season. Get the BMW race fan or enthusiast on your list the No. 94 Turner Championship Z4.
Part #: TMS222774
Price: $72.21 (USD) 
$84.95 (Sale - Save 15%)
Free Shipping Free Shipping
Quantity:   
Carbon Fiber Center Grills - E63 645ci 650i M6 Ditch the boring and overstated factory chrome front grilles and get a darker and more aggressive look on your car. These replacement grilles are made from ABS plastic with a carbon fiber weave on the exterior frame. Carbon fiber is replacing chrome and aluminum as the most desired decorative trim. Since it has its roots in aerospace and motorsports the look gives off the impression of cutting-edge technology and lightness. But our suppliers have improved the fit and finish of carbon's inherently rough appearance. There are several quality grades to carbon fiber weave and we would put this right in the middle. It's a good quality carbon weave without costing hundreds more like an Original BMW carbon part would. We inspect each grille for finish imperfections and quality issues so you're getting only the ones we approve. If you want to complete the carbon fiber makeover on your car check out our other carbon grilles, emblems, trim, and spoilers. But please note that we source our carbon products from multiple suppliers and the carbon pattern will vary. Our grilles are sold in pairs - one for the left and one for the right. Installation is easy as they snap out and then snap back in.

This item fits the following BMWs:
2004+ E63 BMW 645ci 650i M6
Part #: BM-0181
Price: $271.96 (USD) 
$319.95 (Sale - Save 15%)
Free Shipping Free Shipping
Quantity:   
Differential and Transmission Oil Drain and Fill Combo Wrench This multi-functional combination wrench features a 14mm Allen hex socket at one end and a 17mm hex wrench at the other. This allows you to perform drain and fill procedures on your BMW with one tool! The 14mm Allen is common for drain and fill plugs on BMW differentials. This wrench is ideal because many BMWs with spare tire wells do not have adequate space to fit a standard 14mm Allen socket and ratchet. The 17mm hex is common for transmission drain and fill plugs. Other BMW transmissions may also use a 14mm female hex / Allen plug.
Part #: 2760
Price: $50.96 (USD) 
$59.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Low Profile 2 Ton Aluminum Floor Jack With 12

 A complete set offered to ensure that the proper lifting techniques are at use. It's never wise to work under a vehicle supported by only a floor jack, with this complete kit you get a complete matching set to get the job done safe and fast.

  • Special low profile thick frame side plates and reinforced lift arm for added strength and use.
  • Wide track front wheels help provide chassis torsion control and durability.
  • Angular positioned pump pistons provide maximum effective pump stroke even when jack is completely under the vehicle.
  • Ball bearing mounted rear swivel caster wheels for easy maneuverability.
  • Side mounted handles for carrying and easy positioning.
  • Overload and bypass safety valve prevents jack overload and over extension.
  • Two piece quick release padded handle for storage or transport.
  • Dual piston's for 5 pump full extension

Details:

  • Jack Capacity 2 Ton
  • Max Lift Height 20"
  • Low Height 3.25"
  • Chassis Length 26.5"
  • Overall Width 13"
  • Saddle Diameter 4.5"
  • Handle Lenght 50"
  • Shipping Weight 50 lbs

Schwaben 12" wheel Stands:

These stands are made from special EPS foam with an anti-skid coating.

Won't scratch or mark your floors!

Lightweight at only 5 lbs each, makes these stands easy to carry and maneuver.

Works on virtually any surface, including sand!

Will not scoot, slip or slide, no matter the surface.

Specs:

12" tall,15.75" long,12" wide.

Works on wheel diameters from 25 to 30 inches.

Part #: 011362sch01aKT1
Price: $293.21 (USD) 
$390.95 (Sale - Save 25%)
Quantity:   
Schwaben Low Profile 2 Ton Aluminum Floor Jack With Aluminum 3-Ton Jack Stands

Having a low profile floor jack can be a great asset for your garage, perfect for those with a lowered car as well as those that aren't. Most car owners with a lowered vehicle have been in the position of their floor jack not making the clearance needed, the low profile jack is the answer. 

  • Dual pump pistons raises the saddle to maximum height in only 5 pump strokes, with minimum effort.
  • Special low profile thick frame side plates and reinforced lift arm for added strength and use.
  • Wide track front wheels help provide chassis torsion control and durability.
  • Angular positioned pump pistons provide maximum effective pump stroke even when jack is completely under the vehicle.
  • Ball bearing mounted rear swivel caster wheels for easy maneuverability.
  • Side mounted handles for carrying and easy positioning.
  • Overload and bypass safety valve prevents jack overload and over extension.
  • Two piece quick release padded handle for storage or transport.

Details:

  • Jack Capacity 2 Ton
  • Max Lift Height 20"
  • Low Height 3.25"
  • Chassis Length 26.5"
  • Overall Width 13"
  • Saddle Diameter 4.5"
  • Handle Lenght 50"
  • Shipping Weight 50 lbs

The ultra light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands just shows how much pride in workmanship goes into our stands.These stands are all aluminum construction with heavy-duty  flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to insure pin stays in place.  

Min. Height is 10.6".

Max Height is 15.4".

Large 7" diameter base.

Outer support tube is 2-1/8" in diameter.

Part #: 011362sch01aKT
Price: $266.92 (USD) 
$355.90 (Sale - Save 25%)
Quantity:   
Schwaben 2-Pc 67

These ramps never scoot, slip or slide while rolling onto the ramps.All that said means these ramps are easy to drive up on and very safe. Our Schwaben ramps will never scratch or blemish your floors.

Having ramps to use offers more than just convenience, it offers safety. Laying under a car working is much easier to do knowing the car is resting the wheels on a firm surface.

Please refer to chart below to see if these 67" Schwaben ramps are right for you vehicle.

1. Take a yardstick, and wedge it under the front edge of front tire.

2. Raise it up until it hits the underside of your car( the spoiler)

3. Measure from the tip of the yardstick to the ground, vertically.

 67 " long,14" wide, 10" lift height, at 15 lbs each and a low 10.8 degree incline.

If your measurement is 7.25" or greater, you can clear these ramps with no problem. 

These extensions will lower your approach angle to 6.6 degrees. Once you get the car into place, you can remove the extensions for more working room under the vehicle. One set holds up to 3000 lbs.

For increased safety, use wheel chocks with all Schwaben Ramp products.

Part #: 006160sch01aKT
Price: $356.25 (USD) 
$475.00 (Sale - Save 25%)
Quantity:   
ECS Tuning Wheel Spacers - 30mm - 72.6mm CB

Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

This item fits the following BMWs:

2008-2012 E82 BMW 128i 135 1M
1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Rear Only
2007-2013 E70 BMW X5M
2007-2014 E71 BMW X6 xDrive35i X6 xDrive50i X6M

Part #: 001058ECS04-30KT
Price: $93.46 (USD) 
$109.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 16oz Ball Peen Hammer The 16oz Ball Peen hammers are constructed with a fiberglass handles with a molded rubber grip. The heads are made from drop forged steel to avoid damage and to stand up to long years of impacts. Each side is precision ground for accurate striking points.
Part #: 016805SCH03A
Price: $8.21 (USD) 
$10.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 36oz Dead Blow Hammer The 36 oz dead blow hammer is built with steel shot internals that delivers a stronger force of impact and prevents rebound. The hammer itself is all built from a high-impact poly jacket that encases the head and handle. This hammer allows you to hammer softer metals, such as aluminum, without damaging the surface or the part itself. The handle has a diamond-shaped grip pattern to prevent your hands from slipping and sliding, even with your hands are covered with oil.
Part #: 016805SCH04A
Price: $11.21 (USD) 
$14.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Liqui Moly Manual Transmission / Differential Fluid 85w90 - 1 Liter

Interval oil changes are often recommended for manual transmissions to ensure long-term reliability and maximum wear prevention. Fresh oil will prevent small amounts of metallic build up from preventing fluid flow and clogging filters and narrow channels. 

Check your owner's manual to determine when it is best to flush your system and what type and weight fluid to use when re-filling your system. 

This 85w90 weight oil's multi-viscosity are perfect for ensuring protection in all climates and its synthetic composition allows for smoother shifts.

APPROVALS:

  • API GL5
  • MAN 342 Typ M1
  • MB-Freigabe 235.0
  • MIL-L 2105 D
  • ZF TE-ML 16C
  • ZF TE-ML 17B
  • ZF TE-ML 19B
  • ZF TE-ML 21A
  • ZF Freigabenummer ZF000695

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Part #: 20010
Price: $8.96 (USD) 
$9.95 (Sale - Save 10%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Turner Motorsport Aluminum Pedal Set for Automatic Transmission

By popular demand, our shoe-gripping Turner Motorsport pedal set is now available for automatic transmission. These pedal covers feature pyramid shaped spikes on the brake pedal, which actually BITE the soles of your shoes PERFECTLY, creating the ultimate (and unbeatable) friction surface where you want it. The throttle pedal is left smooth, so that your foot can roll on and off the gas smoothly. The automatic transmission set includes 2 pieces -- one brake pedal and one throttle/gas pedal.

Our pedals are anodized for a beautiful cosmetic finish that resists chips and flaking. Stainless steel hardware is included, as well as a basic installation guide (professional installation always recommended). These pedals are for left-hand drive (LHD), automatic transmission BMWs only (sequential manual transmission cars should use the manual transmission set).

Also available in black anodized! The same shoe-gripping performance as our standard "naked" aluminum racing pedals, but with an added black anodized coating, for a stealth black finish. We always recommend the naked metal pedals for harsher/race type use, as all cosmetic finishes will eventually degrade over time. But for those looking for the black-out look, we can now accommodate! To add this option, simply choose your selection below.

Part #: TMS339010
Price: $93.46 (USD) 
$109.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Complete Front & Rear Brake Package - E60 M5, E63 M6

This brake package for the 2006-2010 BMW E60 M5 and E63 M6 comes with everything you need to perform a major brake overhaul -

Front and rear rotors with hardware - OEM BMW replacements
Front and rear brake pads - OEM street pads, StopTech Street Performance street pads
Front and rear pad wear sensors
Brake fluidLow viscosity for street use or high performance/racing fluid for track use.

Our brake package uses the same replacement parts from the same manufacturers as BMW dealers use to service your car. The big difference is that we're able to offer these parts for a substantial savings from the dealer markup price. As an independent company we're able to buy our parts from multiple OEM suppliers whereas BMW dealers must buy their parts from BMW. We're able to shop from different vendors which gets you a better price while still maintaining original quality. You don't have to pay high prices at the dealer to get the same quality and performance.

In some cases, we offer performance alternatives to the OEM items. For an enthusiastic BMW owner, the standard BMW part may be inadequate and we offer an upgraded part, based on our almost 20 years of BMW tuning experience. We seek out high quality suppliers and designs that we would want on our own vehicles. Many times performance parts will fix a design flaw with the original BMW part, improving your performance at the same time.
 

Brake Package FAQ

Brake Pad Buying Guide

Brake Rotor Buying Guide

 


Applications:
2006-2010 E60 M5 sedan
2006-2010 E63 M6 coupe

 

Part #: TMS180886
Price: $1068.79 (USD) 
$1079.48 (Sale - Save 1%)
Free Shipping Free Shipping
Turner BMW 5mm Wheel Spacers (Pair) - Most BMWs (see applications)

5MM (.20 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4

Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems --

  • Correct wheel offset issues
  • Achieve a flush fitment instead of the "tucked under" look
  • Clearance the wheel from contact with other components (suspension, brakes, etc).
  • Improve handling and stability by increasing track width

A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required.

These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is light weight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market!

Turner Wheel Spacer Features --
+ hub-centric design, 1-piece spacer
+ precise tolerance fitment thanks to CAD process and CNC mill machine
+ aerospace grade aluminum  light weight but very strong with a high resistance to corrosion
+ additional military-spec hardcoat for further corrosion resistance
+ innovative Quick Release pockets for easy removal (better than a chamfered back edge)
+ laser engraved size and part number for easy identification
+ stealthy anthracite or black color
+ extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available)
+ Turner Motorsport track and street tested!
+ Made in the USA

Extended Wheel Bolts
Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing.

Spacer Specs:
(click to expand)
Spacer Specs:
bolt pattern:5 x 120
center bore:72.6mm
hubcentric?yes
wheel pad size:normal

Fitment Notes:
(click to expand)
5mm spacer note: a 5mm spacer sits on the existing hub lip but leaves less than 5mm of lip for the wheel to rest on. Therefore, wheels that have a bevel around the center bore will not engage the hub lip and may reseult in a vibration.

Year & Model Applications
(click to expand)
2008-2012 E82 BMW 128i 135 1M
1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Part #: TWH9905005
Price: $67.96 (USD) 
$79.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Turner Motorsport Z4 Racecar T-Shirt - Black Welcome to 2014! Introducing our new Z4 GTD race car. The brand new Turner Motorsport BMW Z4 GTD competing in the TUDOR United SportsCar Championship comes to life on high quality 100% cotton black t-shirt. The shirt features some impressive illustrations of both the front and rear of the extremely wide and curvy Z4. The graphics pop off the shirt transitioning from a subtle gray scale to the Turner blue and yellow.

Get yours today, these are limited in quantity and won't last long. Choose size below.
Part #: G200-BK
Price: $21.21 (USD) 
$24.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Turner Motorsport Brake Bleeder Bottle The Turner Motorsport Brake Bleeder Bottle is the perfect companion when bleeding your brakes! The bottle features a nice long flexible hose so fitment over the bleeder nipple is a snap. These bottles also offer either a magnetic mount or a cable lanyard, so you can hang the bottle or stick it to the brake rotor, this leaves your hands-free to work with your tools. It works great with our Power Brake Bleeder
Part #: TMS1196
Price: $14.02 (USD) 
$16.49 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Turner BMW 3mm Wheel Spacers (Pair) - Most BMWs (see applications)

3MM (.12 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4

Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems --

  • Correct wheel offset issues
  • Achieve a flush fitment instead of the "tucked under" look
  • Clearance the wheel from contact with other components (suspension, brakes, etc).
  • Improve handling and stability by increasing track width

A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required.

These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is light weight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market!

Turner Wheel Spacer Features --
+ hub-centric design, 1-piece spacer
+ precise tolerance fitment thanks to CAD process and CNC mill machine
+ aerospace grade aluminum  light weight but very strong with a high resistance to corrosion
+ additional military-spec hardcoat for further corrosion resistance
+ innovative Quick Release pockets for easy removal (better than a chamfered back edge)
+ laser engraved size and part number for easy identification
+ stealthy anthracite or black color
+ extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available)
+ Turner Motorsport track and street tested!
+ Made in the USA

Extended Wheel Bolts
Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing.

Spacer Specs:
(click to expand)
Spacer Specs:
bolt pattern:5 x 120
center bore:72.6mm
hubcentric?yes
wheel pad size:normal

Fitment Notes:
(click to expand)
5mm spacer note: a 3mm spacer sits on the existing hub lip but leaves less than 9mm of lip for the wheel to rest on. Therefore, wheels that have a bevel around the center bore will not engage the hub lip and may reseult in a vibration.

Year & Model Applications
(click to expand)
2008-2012 E82 BMW 128i 135 1M
1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Part #: TWH9905004
Price: $67.96 (USD) 
$79.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Carbon Fiber Roundel Emblem Decal Set - Hood/Trunk/Wheels/Steering Wheel Help your BMW stand out from the crowd with our colored Roundel emblem covers. Whether you are looking to match your paint color, hightlight your interest in motorsports, or freshen the look of your car, Roundel decals offer a great way to personalize your BMW. These easy to install vinyl decals adhere over the existing Roundel emblems. The kit includes colored quadrants to cover the hood emblem, trunk emblem, steering wheel and 4 wheel emblems - and fender emblems for Z3 and Z4. These are made to withstand all weather conditions and are removed with ease if required.

Currently we offer the following carbon fibre style roundel stickers: Printed Carbon Fiber - Black, Dynamic Carbon Fiber - Silver. Sorry, Dynamic Carbon Red, Dynamic Carbon Black, and Dynamic Black/Silver are no longer available.

Note: These are vinyl overlays for the existing roundels. Actual roundel emblems are not included. We have BMW Roundel emblems available here.

This item fits the following BMWs:
These emblem covers fit all BMW years and models including:
E30, E36, E46, E90, E92, E34, E39, E60, F10, E63, E38, E65, F01, X3, X5, X6, Z3, Z4 and more.
Part #: TMS20551
Price: $25.46 (USD) 
$29.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Turner tow strap Our polyester tow strap is far and above the best tow strap available for the modern BMW chassis. We use a heavy-duty, chemical-resistant polyester strap webbed around a stainless steel stud. There is plenty of length available for tow hooks to grab onto without hitting your bumper and damaging paint or causing cracks. The precision-cut stud is fits E30 (89+), E36, E46, E82, E90, E92, Z3, and Z4. We have further refined the shape and size of the bolt so that spoiler modifications are kept to a minimum. Note that on some models you may need to modify the bumper slightly for the best fit.

A tow strap is a better pickup point than a fixed steel ring, which will add weight and protrude past the bumper. Some racing series have banned the steel rings because they increase the likelihood of contact during close racing. Our straps are sold in bright red, bright blue, or black (red suggested for racing use as it makes it easy for tow truck operators and safety crews to spot). On some models, the strap may be tucked behind the bumper panel when not on track, which makes this perfect for dual-use track/street cars and full racecars alike. Priced per strap so order two for the front and rear.

This item fits the following BMWs:
1989-1991 E30 BMW 318i 318is 325i 325is
2008-2012 E82 BMW 128i 135i 1M Coupe
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Part #: TMI9020TSI
Price: $84.96 (USD) 
$99.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
E63/E64 645/650 Supersprint Performance Mufflers (Left & Right Set)

Free ground shipping! 

These rear mufflers are a perfect addition to the exhaust to make the 645ci and 650i a bit louder and let more of the V8 rumble be heard. The stock system uses two rear mufflers with an additional two sets of resonators to deeply muffle the sound. The Supersprint mufflers are free flowing stainless designs with less restriction which allows more volume and a modest increase in torque and horsepower. The mufflers are tuned to provide a deep, throaty exhaust note. For even greater volume and more power gains, opt for the full Supersprint system that deletes all of the resonators.

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

 

section:rear mufflers

connects to:stock section 2 resonator or Supersprint section 2 X-pipes

tip style:120x80mm dual oval

material:T304 stainless steel

*Bumper will need to be trimmed for proper fitment*


This item fits the following BMWs:
2004-2007 E63 E64 BMW 645ci 650i

Part #: 788535-788505
Price: $1151.93 (USD) 
$1535.9 (Sale - Save 25%)
Free Shipping Free Shipping
Stainless Brake Rotor Set Screw (34211161806) - Set Of 4

This is a set of stainless steel brake rotor retaining screws to replace the factory steel screws. As everyone knows, the stock screws will seize in the holes over time. And the shallow recess on the head means the screw is easily stripped. These replacement rotor screws are stainless steel and won't corrode and seize in place.

This is a set of 4 stainless screws. Most BMW rotors take one screw but some M cars after 2001 will take two screws per rotor.

Part #: 34211161806KT
Price: $8.47 (USD) 
$9.96 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Daytona 2014 Livery Decal Set for Fujimi BMW Z4 GT 2013 Model Build your own Turner Z4 GTD / GT3 1:24 Scale Model! This decal sheet contains livery graphics to model the Turner Motorsport BMW Z4 as raced at the 2014 Daytona 24 hours. Decals are die cut for accuracy and fitment. The livery decals were created using our original livery design files, so we can vouch for its overall accuracy. The completed model looks incredible!

This graphics decal set is specifically designed for the Fujimi brand 1/24th scale BMW Z4 2013 kit. Model sold separately. Assembly required
Part #: MSH-94
Price: $17.00 (USD) 
$20 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Turner BMW 17.5mm Wheel Spacers (Pair) - Most BMWs (see applications)

17.5MM (.69 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4

Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems --

  • Correct wheel offset issues
  • Achieve a flush fitment instead of the "tucked under" look
  • Clearance the wheel from contact with other components (suspension, brakes, etc).
  • Improve handling and stability by increasing track width

A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required.

These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is light weight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market!

Turner Wheel Spacer Features --
+ hub-centric design, 1-piece spacer
+ precise tolerance fitment thanks to CAD process and CNC mill machine
+ aerospace grade aluminum  light weight but very strong with a high resistance to corrosion
+ additional military-spec hardcoat for further corrosion resistance
+ innovative Quick Release pockets for easy removal (better than a chamfered back edge)
+ laser engraved size and part number for easy identification
+ stealthy anthracite or black color
+ extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available)
+ Turner Motorsport track and street tested!
+ Made in the USA

Extended Wheel Bolts
Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing.

Spacer Specs:
(click to expand)
Spacer Specs:
bolt pattern:5 x 120
center bore:72.6mm
hubcentric?yes
wheel pad size:normal

Year & Model Applications
(click to expand)
2008-2012 E82 BMW 128i 135 1M
1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Part #: TWH9905018
Price: $83.26 (USD) 
$97.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Replacement StopTech 355x32mm Rotors for Big Brake Kits - Left & Right Pair Replacement StopTech AeroRotor for big brake kits - 355mm diameter, 32mm thickness. Choose from either slotted or cross-drilled and standard finish or corrosion-resistant zinc coating. Comes with new mounting hardware to re-use the original StopTech mounting hat. This is for a Left and Right Pair.

Size: 355x32mm
Type: Gas-Slotted or Cross-Drilled
Finish: standard finish (no coating), or zinc coating
Fitment: Left and Right Pair
Applications: Fits any StopTech Big Brake Kit that uses the 355x32mm disc.
Part #: ST0PTECH355X32
Price: $604.71 (USD) 
$671.9 (Sale - Save 10%)
Replacement StopTech 355x35mm Rotors for Big Brake Kits - Left & Right Pair Replacement StopTech AeroRotor for big brake kits - 355mm diameter, 35mm thickness. Choose from either slotted or cross-drilled and standard finish or corrosion-resistant zinc coating. Comes with new mounting hardware to re-use the original StopTech mounting hat. This is for a Left and Right Pair.

Size: 355x35mm
Type: Gas-Slotted or Cross-Drilled
Finish: standard finish (no coating), or zinc coating
Fitment: Left and Right Pair
Applications: Fits any StopTech Big Brake Kit that uses the 355x35mm disc.
Part #: ST0PTECH355X35
Price: $621.00 (USD) 
$690 (Sale - Save 10%)
Free Shipping Free Shipping
on orders $199 and up
Schwaben Axle Impact Socket Kit - 6 Pieces

When it comes to the torque found on axle nuts you're already looking at using a breaker bar or impact gun not to mention the corrosion collected over the years. The safest approach is using impact socket, since they are built with the strength needed to avoid breaking under pressure.

Features:

  • Heavy duty ½ inch-drive sockets and drivers have extra thick alloy steel walls, and take a beating that would destroy normal sockets
  •  Durable black oxide coating wipes clean easily and resists rust
  • Contains three 12-point sockets for a sure grip on the most common sized axle nuts, plus three hex drives for removing common hex-head plugs and fasteners
  • Conveniently packaged in a blow molded case, this set will please the most demanding professional technician or discriminating prosumer

Kit includes:

  • 30mm, 32mm, and 36mm - 12-point axle nut sockets - ½" drive

  • 14mm, 17mm, and 19mm hex head drive axle shoulder bolt sockets - ½" drive

Part #: DS-6P
Price: $37.46 (USD) 
$49.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Round Magnetic Parts Tray, 4 3/8

An easy way to hold fasteners without the risk of knocking them over and trying to find them.

 

Part #: PM-110
Price: $7.46 (USD) 
$9.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Hub Centric Ring Adapter Set for E39 Wheels These hubcentric rings are required when fitting E39 wheels to any other BMW 5-lug chassis. The E39 uses a larger center bore on the wheel (74.1mm) but most other BMWs have a 72.5mm lip on the hub. That little difference will cause the wheel to not fully seat itself on the hub, even when fully torqued down. These centering rings fill that gap and allow the wheel to rest properly on the hub. For Genuine BMW E39 wheels only.
Part #: 747260
Price: $9.31 (USD) 
$10.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
aFe Throttle Body Spacer - E60 550i E63 650i E53 X5 4.8is Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque - +10 hp, +14 lbs/ft torque - and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers. This throttle body spacer is 50-state legal (CARB E.O Number D-516-2). Click here for installation instructions

This item fits the following BMWs:
2004-2010 E60 BMW 550i
2004-2010 E63 BMW 650i
2002-2008 E65 BMW 750i 750li
2004-2006 E53 BMW X5 4.8is
Part #: 46-31006
Price: $179.10 (USD) 
$199.00 (Sale - Save 10%)
Free Shipping Free Shipping
Quantity:   
Schwaben BMW 14/17mm Service Wrench

Take one wrench, not two to your next fluid service. The Schwaben Service Wrench fits both crankcase and drain plugs in BMW, Mercedes, and other European vehicles.

Features:

  • Six-point 17mm box end won’t round off engine oil drain plugs
  • Hardened 14mm hex at the opposite end fits many transmission fill and drain plugs
  • Made of vanadium steel with polished chrome finish
  • Long handle for added leverage.

Fits most vehicles with M10, M20, M30, M42, M44, M50, M52, M54, M56, M70, S14, S38, S50, S52 and S70.

Application note: Please verify the exact size of the transmission and differential plugs in your car. BMW has used both 14 and 17mm plugs in some vehicles. 

Part #: ecst007
Price: $22.46 (USD) 
$29.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 1/4 A convenient ratchet with 1/4" & 3/8" drive options. The perfect ratchet when you're on the go, reducing the amount of tools you need to carry in case of a road side repair.
Part #: P34472-32
Price: $9.71 (USD) 
$12.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Mini Tubing Cutter

This great little tubing cutter is a must have in tight work spaces. Large adjusting knob for easier adjustment. This tool only needs 1-1/4" of space around tube.

Features:

  • Handles tubing from 3-16mm (1/8"-5/8") O.D.
  • For copper, aluminum, brass and most thin wall steel.
  • Grooved rollers allow flared tube to be cut directly below the flare.
Part #: 006644SCH01A
Price: $5.21 (USD) 
$6.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Battery Post And Terminal Brush

Battery Terminal brush uses the external brush to clean the cable clamps and the internal brush to clean the battery posts. Made from high Impact plastic body to eliminate tool corrosion.

Keeping the connection clean is an important part of making sure your battery is transferring the proper voltage during startup.

Part #: 006348SCH01A
Price: $3.71 (USD) 
$4.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 40

Having a creeper can make working under the car much easier and more comfortable, roll in and out, padding, and keeping those clothes a bit cleaner. 

 

 Features:

  • Thick fully padded leatherette cover.
  • 40" long with heavy-duty metal support frame.
  • 1"" steel tube frame.
  • Four position adjustable headrest.
  •  Six 2 1/2"oil-resistant rollers.
  • Powder coated frame to resist rusting.
  • Overall dimensions: 17" x 40" X 4"
  • Ground clearance: 1-1/2"
  • Ball bearing swivels on wheels.
  • 250lb capacity.
Part #: 005941SCH01A
Price: $44.96 (USD) 
$59.95 (Sale - Save 25%)
Quantity:   
Schwaben Locking Service Cart

An important factor when it comes to automotive work other than having the right tool for the job is how to keep those tools organized. The locking Service cart really comes in handy when you need to keep the tools you're using in place, but don't want to leave them out for theft.

 

Features:

  • Thru tray frame construction for stable support
  • 3" deep locking drawer with full extension roller bearing drawer slides
  • Chrome plated 16 gauge box frame and handles
  • 350 lbs load capacity supports heavy tools and equipment
  • Large, easy to maneuver 4" ball bearing swivel casters (2 are locking)
  • Beautiful & durable high gloss black powder coated finish
  • Height  - 35.3"
  • Length  - 30"
  • Depth - 16"
  • Weight  - 64.45lbs
Part #: 006692SCH01A
Price: $134.96 (USD) 
$179.95 (Sale - Save 25%)
Free Shipping Free Shipping
Quantity:   
Schwaben 3/8

A professional quality flex ratchet features a fine satin finish designed for durability and easy clean up.

Features:

  • Special designed 72T gear mechanism
  • 5 degree of handle movement between gears 
  • Flex head has 7 detent positions in a 180 degree swing
  • Push button release holds socket tight until you are ready to release
  • Ratchet is a full 290mm ( 11") long for extra leverage.

Limited Lifetime Warranty

Part #: 005981SCH01A
Price: $22.46 (USD) 
$29.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 6.5 Liter Fluid Extractor

6.5 Liter Extractor system is hand -operated for fast extraction of any type of fluid. Two different diameter extracting tubes are included to suit your particular application. Unit has a vacuum release button for quick and easy release. 

Features:

  • Flip out foot for stability whils using the extractor
  • Built in hose storage
  • 41" Main tube 3/8" OD
  • Two 35" extension tubes 1/4" and 3/16" OD ( couples to main tube).
Part #: 011885SCH01A
Price: $59.96 (USD) 
$79.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 9 Piece Scraper, Hook And Pick Set

Some of the most popular  uses are carbon cleaning/scraping, picking out o-rings, snap rings and clips.This kit features large and small picks, hooks and a 1" wide scraper. This 9pc set should be part of everyone's tool assortment.

Features:

  •  3" Blade MINI Awl, 90°, Hook, and Curve
  • 6" Blade Awl, 90°, Hook, and Curve
  •  6" x 1" wide scraper
Part #: 008504SCH01A
Price: $16.46 (USD) 
$21.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
E60 M5, E63 M6 Front Cool Carbon S/T Performance Brake Pad Set

Cool Carbon S/T brake pads have excellent stopping power and feel with low levels of dust and noise. Engineered for European cars with high speed development on the Autobahn, Cool Carbon is a sporty compound intended for every day use. The S/T compound has more stopping power and initial bite than stock thanks to a higher coefficient of friction and composite materials. We are big fans of these as a sporty street pad and recommend them for medium-aggressive street driving and autocross.

  • High performance for street use
  • Excellent friction/torque at various temperatures
  • Great feel and modulation
  • Low noise
  • Low-medium dust
  • rotor friendly

Cool Carbon pads are sold as a set for each axle (4 pads total).

This item fits the following BMWs:
2006-2010 E60 BMW M5
2006-2010 E63 E64 BMW M6

Part #: 7821-D1151
Price: $133.16 (USD) 
$147.95 (Sale - Save 10%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Coolant Refill/Air Purge Tool

When it comes to BMW's we all know the weak point is commonly in the cooling system, many models proving hard to bleed the air pockets out after the refresh. The coolant refill tool solves this problem, ensuring that you get an air pocket free fill. The entire task is as simple as draining the system like normal, reinstalling the drain plugs and hooking the tool up to your refill location. The reason this tool works so well is due to the venturi valve, it converts air pressure from the compressor to vacuum inside the cooling system, then with a twist of a valve sucks coolant right into the system using the vacuum pressure.  

This tool requires access to a standard air compressor with a minimum rating of 90 PSI (6.2 bar).  A convenient, though not required part to complete the job is a container large enough to hold the entire coolant mixture capacity for your vehicle.  This will dramatically reduce the risk of any unwanted air being drawn into the system.  This tool is designed to refill the cooling system after it has been drained.

 

Part #: 003466SCH01
Price: $57.71 (USD) 
$76.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Trailer Ramps 7

Is your trailer door ramp too steep to get your car into the trailer, 

Load your vehicle safer and easier with Schwaben trailer ramps. Our trailer ramps create a more gradual angle to prevent spoiler damage when loading and unloading vehicle into or out of trailer.

Features:

  • These ramps work on cars weighing up to 6,000 pounds
  •  Ideal for low ground clearance cars with extra wide tires.
  • Will not scratch or mark your floors!
  • Will not scoot, slip or slide no matter the surface
  • Will not damage trailer door or trailer
  • Light weight at only 15 lbs
  • Highly durable, virtually indestructible, and very stable
  • Ramps have built in straps to allow transport or ability to be hung on the wall
  • 74" long, 14" wide, 7" tall

Note: if your current stock trailer ramps have an additional fold down ramp, we suggest you either fold it up or remove it.

Part #: 006168SCH01A
Price: $279.75 (USD) 
$373.00 (Sale - Save 25%)
Quantity:   
Schwaben Deep Well Impact Socket - 30mm

This large socket is the perfect tool for axle nuts when servicing the axle shafts or wheel bearings.

Features:

  • ½-inch drive 30mm 12-point socket
  • Specially hardened to take the added abuse from a impact gun
  • Coated for added protection and so you can tell it apart from non impact rated sockets
  • 75mm depth  to accommodate many applications and different length shafts
  • Made of durable chrome moly steel
Part #: 003302SCH01A
Price: $14.96 (USD) 
$19.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Exhaust Pipe Hanger removal Pliers

Tired of busting your knuckles from old hardened exhaust hangers?

This Schwaben tool removes the hanger by pressing on the steel hanger bracket and pulling the rubber hanger in one motion. Self centering force pin locks onto the pin while the flat paddle pulls off the rubber hanger from behind. Slim profile and a 25 degree offset works in tight areas.

Part #: 008778SCH01A
Price: $20.21 (USD) 
$26.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Set Of 4 Pinch Weld Protectors

These weld protectors allow you to safely jack up your vehicle without crushing or bending any pinch welds. These will fit any jack and will work with many jack stands such as the Schwaben Aluminum Jack Stands.

Specifications:

  • 3" wide
  • 1" tall
  • Single groove top
  • Double grooved bottom
Part #: 3107838KT
Price: $29.96 (USD) 
$39.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
E60 M5, E63 M6 Supersprint Cat-Delete Downpipes (Deletes Primary Cats In Manifold)

Free ground shipping! One key to making power from the S85 V10 is eliminating the factory catalytic converters in the manifold. Ideally, the best way to do this is with a set of Supersprint tubular headers. But if you want to keep your stock manifold and 'gut' the stock cats from them these pipes are the way to go. The stock cats are cut along an existing weld in each manifold and this piece is welded in place. Special software or modules will be required to keep fault codes and check engine lights from coming on. O2 sensor and EGT sensor bungs are pre-installed. Any Supersprint section 1 piece will bolt on to these downpipes.

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

 

section:manifold cat-delete pipes

connects to:Supersprint section 1, p/n 988812

material:T304 stainless steel

 

This is a race exhaust system which alters or deletes the emissions equipment on your car, and may not meet emissions standards in all states. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.


This item fits the following BMWs:
2006-2010 E60 BMW M5
2005-2011 E63 BMW M6

Part #: 789311KT
Price: $355.47 (USD) 
$473.96 (Sale - Save 25%)
Free Shipping Free Shipping
Quantity:   
E60 M5, E63 M6 Supersprint 70MM Section 1 Straight Pipes

Free ground shipping! 

These pipes fit after the headers and will eliminate the second set of cats in the stock exhaust. You can use these pipes with the stock exhaust headers/cats or with the Supersprint cat-delete downpipes. By deleting the secondary cats you remove a significant blockage in the exhaust flow - increasing horsepower and improving reliability for track or competition cars. You won't have to contend with catalytic material breaking down and clogging your exhaust while you're on the track. Supersprint's dyno testing with this pipe and the rest of their exhaust resulted in a 22hp gain! In addition removing the cats will make the exhaust louder, allowing more glorious V10 magic to be heard! These are the newest Supersprint section 1 pipes with oversized 70mm pipes.

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

 

section:section 1 straight pipes

connects to:stock manifold or Supersprint cat-less downpipes; stock or Supersprint section 2

material:T304 stainless steel


Dyno:


Stock vs. Supersprint:
section 1 cat-delete,
X-pipe, mufflers


Video:


stock headers
Supersprint cat delete front pipes
Supersprint x-pipe
Supersprint mufflers

 

This is a race exhaust system which alters or deletes the emissions equipment on your car, and may not meet emissions standards in all states. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.


This item fits the following BMWs:
2006-2010 E60 BMW M5
2005-2011 E63 BMW M6

Part #: 988812KT
Price: $681.72 (USD) 
$908.96 (Sale - Save 25%)
Free Shipping Free Shipping
Quantity:   
Performance Brake Caliper Guide Bushing Installation Tool Set

Installs bushings straight and true with minimal effort. Includes tools for both iron and aluminum calipers. Purchase only one tool set for your entire caliper guide bushing upgrade - tools are not one time use.

 

Part #: 003326ECS03
Price: $16.96 (USD) 
$19.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Stage 1 AFe Intake Kit - E60 545i, E63 645ci 04-05 This intake kit replaces your restrictive factory air box. It features a 3-angle aluminum velocity stack adapter, 1.6mm powder-coated steel heat shield, trim sealed to seal out hot engine air, and a custom aFe brand cotton filter.

For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but the oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

By removing your stock intake air box, you are removing the most restrictive portion of your intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
Part #: 51-11081X
Price: $326.66 (USD) 
$362.95 (Sale - Save 10%)
Free Shipping Free Shipping
Schwaben Cooling System Pressure Tester Kit

Are you refreshing your coolant system or having issues with coolant loss? An easy way to test your system for leaks and ensure you're able to maintain pressure without coolant loss is the Schwaben Cooling System Pressure Tester Kit. This kit has everything you need to attach and test your system: a hand operated pressure pump with an attached pressure gauge to carefully and accurately monitor the system's pressure, an attached 24" flex hose that connects with quick-couplers and adapters that tightly seal to prevent air pressure from escaping, 8 color-coded screw on radiator adapters and 4 twist on radiator caps, a temperature gauge, all needed instructions, and a sturdy blow-molded case to protect all components from damage.

This kit includes the following:

  • Hand operated pressure pump with a 0-35 psi gauge.
  • Long 24" flex hose between pump and quick coupler for adapters.
  • 12 high quality adapters for radiator
  • Temperature gauge
  • Instruction Manual
  • Blow molded case
Part #: 014710SCH01A
Price: $97.46 (USD) 
$129.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Part #: 007237sch01aktKT
Price: $44.96 (USD) 
$59.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 6

Ensure you are getting the most accurate measurements you can with the Schwaben 6" Carbon Fiber Composite Digital Caliper. Machined components and things like shims and bearings all require very exact sizes for proper clearance and fitment. With this caliper, you can check these component's measurements quickly and accurately, down to .0005in/.01mm graduations. 

Specifications:

  • Carbon Fiber Composite Digital Caliper made from a milled carbon fiber / plastic mix
  •  Digital display with inch, metric and fractional read out 
  •  Push button conversion 
  •  4 measurements - inside, outside, depth and step 
  •  Large LCD Panel 
  •  6"/150mm range 
  •  .0005"/.01mm/1/64" resolution 
  • Powered by (1) SR44/357 Battery (included)
Part #: 019711SCH01A
Price: $10.46 (USD) 
$13.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Liqui Moly Special Tec LL 5W-30 Motor Oil - 5 Liter

Special Tec LL engine oil is designed to provide the highest amount of engine protection as well as fuel savings and reduced oil consumption possible. Using proprietary blends of base oils and the latest additive technology, this oil will ensure smooth engines in both high and low temperatures. Other amazing benefits include: optimum oil pressure at all speeds, rapid oil delivery at low oil temperatures, high shear and aging stability, and long service life.

Approved for:

  • BMW Longlife-01
  • VW 502 00
  • VW 505 00
  • MB-Freigabe 229.5

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Part #: 2249
Price: $35.96 (USD) 
$39.95 (Sale - Save 10%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Dinan Performance High Flow Throttle Body - E60 550i, E64/63 650i, E65/66 750i

Eliminate the restriction in your intake system by replacing your throttle body with this performance throttle body from Dinan. The stock throttle body creates a restriction that prevents the engine from getting the air needed at higher RPMs.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This item is worth 2 point(s) towards your Dinan Badge.

This fits the following vehicles:
2006-2010 E60 BMW 550i
2006-2010 E64/63 BMW 650i
2006-2008 E65/66 BMW 750i

Part #: D760-3650A
Price: $833.40 (USD) 
$926.00 (Sale - Save 10%)
Quantity:   
E60 M5 06-10 Stage 2 Turner Motorsport Performance Package

2006-2010 E60 M5, E63 M6 Stage 2 Performance Package
Max HP gain = +50hp* @8200rpm
Max Trq gain = +50ft-lbs* @6900rpm
Rev Limit = 8250 or 8500 RPM

“Night and Day Difference…Wow, I didn’t expect to feel such a big torque gain! ” – Will Turner.

Carefully selecting some of our least-invasive, best bang-for-your-buck S85 hardware, paired with our Stage 1 Performance Software yields impressive results that can be completed in a weekend!

TURNER POWER PULLEY
Our Power Pulley reduces rotational mass and safely under drives your belt driven auxiliaries for reduced parasitic power loss. The end result: More power to your M5 or M6's rear wheels! Designed to give the best performance benefit with no sacrifices or compromises to your BMW's reliability. These have been tested on hundreds of cars before public release and there are simply NO DOWNSIDES to this upgrade. CNC machined using aircraft grade 6061 aluminum billet, and anodized with a stealthy black coating. Others may advertise "their" crank pulley boasting higher numbers (using a smaller pulley profile), but we have concluded that for street and track driven M5 and M6, this is the best size and design to ensure proper engine temp and auxiliary functionality. As the S85 V10 engine doesn't use a traditional harmonic balancer, all factory harmonics and dampening are fully and properly retained. We've found this pulley alone adds 18 to 22 HP and 17 to 21 Ft/lbs Torque on a stock M5 or M6 with no other mods(!!).

The E60 M5 / E63 M6 Power Pulley Kit includes:

  • (1) Underdrive Crank Pulley
  • (1) Correctly Sized Drive Belt
  • (6) Allen Head Bolts
  • (1) Installation instructions

TURNER INTAKE AIR TEMPERATURE SENSOR (IAT) RELOCATION KIT
Got heat soak? The problem is that BMW integrated the S68's intake air temp sensor in the MAF housing, which is sandwiched behind a hot radiator and in some applications next to an even hotter valve cover. The MAF housing absorbs the excess heat from its surroundings and can’t shed it fast enough, and the ECU reads a falsely high intake air temperature.  It then incorrectly adjusts operating parameters to compensate for the false hot air measurement (pulling timing and running a leaner fuel mixture), and torque output drops like a rock.

The fix?  Locate an intake air temp sensor in a location where it can more accurately measure incoming air temps and where it is less prone to heat soak.  By mounting a sensor further away from the heat source and divorcing it from the mass of the MAF housing, it can both resist the effects of heat soak longer and respond to temperature changes more quickly.  The end result?  You’ll experience reduced loss in torque and more consistent power output when you’re pushing your engine hard. 

Result? We recovered 11lb-ft torque at 2500rpm by relocating the temperature sensor on an E39 M5 (E60 owners should expect an even more substantial recovery)!

Installation is as simple as drilling a small hole for the sensor and plugging in the harness.
 

AFE INTAKE SYSTEM
Rid your M5 or M6's V10 powerplant of both of its restrictive factory air boxes with this cold air intake kit by aFe, and you'll cut the airflow restriction IN HALF. Air flow showed an increase of 117% and dyno testing yielded max power gains of  28hp  and  24 ft/lbs of torque . The intake tubes of this kit are custom-designed to accelerate airflow for best performance. Fits all 2006, 2007, 2008 and 2009 and V10 M5 and M6. 

Kit includes everything necessary to install, including installation instructions. This kit can typically be installed in less than 60 minutes, and uses all factory mounting points (no modifications). The kit uses 2 high performance 360 degree radial flow air filters which are washable/reusable (or oiled - your choice). The filtration media uses the deepest pleats in the industry, allowing the most surface area and airflow possible, in the space allowed. The increased airflow is significant enough that it is audible while driving, giving your 5.0 liter V10 a subtly more aggressive sound when revving or under load. Best of all, this is a SAFE product that will not cause any longevity issues or malfunctions to your BMW's intricate engine management system. 

SUPERSPRINT HEADERS/TEST PIPES
This special Race software is designed to work with sport headers that eliminate the primary catalytic converters. On our own M5 project vehicles, the combination of our software and Supersprint headers* netted 30hp and 50ft-lbs of torque - a massive transformation to an already mighty car. While there are incredible gains in power and torque to be had with the addition of headers, customer feedback was telling us some owners were seeking a less expensive and less labor-intensive option - those customers will be particularly interested in the weld-on test pipes below.

The factory header system on the M5/M6 V10 is nicely designed - except where the primary tubes join together. Here the factory tubes are crushed in size and joined in narrow housing ahead of the catalytic converters. Supersprint has designed a fully tubular header and collector system that is fully mandrel bent and makes no compromises. They even patented the design. With a complete exhaust system, we recorded gains of over 60hp! These headers can be connected to either a factory secondary cat or a Supersprint high-flow metallic cat.

What sets these headers apart from others is the expertise and craftsmanship from Supersprint in Italy. These are 100% stainless steel headers with true mandrel bends. It's a carefully engineered header and merge collector design with superior craftsmanship to other systems (sometimes knockoffs to the original Supersprint). Supersprint spends considerable time in R&D, experimenting with piping sizes and layouts to get the most horsepower gain (confirmed with their in-house dyno). Fitment is also a key consideration and this is where Supersprint's commitment to quality fabrication and construction set them apart from cheaper systems.

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preference. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

Supersprint Header Details:

  • section = headers (cat-delete)
  • connects to = stock section 1 (with included adapters) or Supersprint section 1 (cat or straight pipe)
  • material = stainless steel
  • fitment details = professional installation recommended; post-cat O2 sensors must be extended to new location in section 1 (wiring materials included)

TURNER STAGE 2 PERFORMANCE SOFTWARE
Adding power and torque to the M5 V10 is as easy as a flash! Where we can make our software better is by tuning it for higher octane gasoline. The stock software is tuned around the 87octane available in the US (most M5 owners would never use 87 but BMW engineers must account for that possibility). With our software, the performance of the S85 engine is optimized for the higher 91 or 93 octane. We tune many areas of the engine programming -

  • fuel and timing maps at part throttle and wide-open throttle,
  • revised torque settings and knock control,
  • improved VAN0S variable valve timing,
  • smoother and faster pedal response
  • top speed limiter eliminated
  • optional raised rev limit

Our software uses a new version of stock BMW software as its base. Even the new stock software is an improvement over the original M5. If you have other modifications done to your M5/M6, we can supply you with specially-developed software to maximize the gains from those upgrades.

Turner Motorsport has been developing software on the S85 since our first car in 2006. Since then we have done software projects for street, track, and 5.7L stroker engine builds using the stock MSS65 DME. Engine tunes have been developed and checked on our Dynapack chassis dyno and further refined with real world testing. For track cars, our Stage 2 cat-delete software will clear check engine lights and faults (to satisfy race series regulations).

Our software is installed via the Turner flashing OBD tool. This tool plugs into the OBD socket in the dash and the performance software is installed from a laptop computer connected to the tool. It also works as a fault code scanner to read and reset diagnostic trouble codes and reset adaptations. The software program requires a Windows XP/Vista/7/8/10 laptop and the installation and setup are very easy. The OBD tool, cable, and files are shipped to you with simple setup instructions. There is no need to remove your ECU and ship it. You can have your M5 flashed in under an hour from the convenience of your garage or driveway!​

Minimum Octane
You can choose between 91 or 93. We have developed tuning for the standard 'high octane' premium fuel found around the country (91 is the maximum available in some areas). Our power and torque gains are advertised with 93. The 91 octane version will have less timing and slightly less horsepower gains.​

Rev Limit
We have two rev limit options: stock 8,250 and raised 8,500. Having a higher rev limit lets you stay in gear longer and avoid an untimely upshift. Higher rev limits should only be used for brief moments and never for sustained running. Additional engine maintenance, with frequent oil changes and oil analysis, is strongly recommended.​​

Base File Update
Our performance software is built around a specific version of stock software that BMW released as an update. It includes a number of significant changes over older versions for driveability and torque management. The M5 update was such a big step forward that it's considered an upgrade all on its own. No worry if you don't have it - we will provide you with a free update before the Turner performance software is installed

This software and exhaust modifications alter the federally-mandated emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. TMS does not guarantee or promote that this software will pass a federal or state or local emissions test. You can download the waiver here.


This item fits the following BMWs:
2006-2010 E60 M5 sedan
2006-2010 E63 M6 coupe, E64 M6 cabrio

Part #: TS85-STG2DP
Price: $3080.30 (USD) 
$3680.8 (Sale - Save 16%)
Part #: 20230
Price: $8.96 (USD) 
$9.95 (Sale - Save 10%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
APEX FL-5 18x8.5

The new FL-5 is the first APEX design that uses both Flow Forming construction, remaining one solid piece, and a new "I" beam machining technique. This new "I" beam machining process mills out a slight amount of material in the spokes to both reduce weight and add visual appeal with a feature normally only found on some of the most expensive race wheels.

18x8.5" FL-5 weight: approximately 19lbs
18x9" FL-5 weight: approximately 20lbs

APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.

Part #: FL5APEXSTG1
Price: $1400.40 (USD) 
$1556 (Sale - Save 10%)
Gruppe M Carbon Fiber Intake System -- BMW E63 E64 M6

GruppeM intakes are what sets them apart from any competition. The extreme level of detail that goes into the structure and material they use in their design and the countless hours put into perfecting this design results in their Ram Air Systems. By forcing cooler air from outside of the car into the intake instead of using hot air from the engine bay, they get much denser air entering the engine, allowing for higher levels of torque. In addition, their intakes add an enhanced sound of performance in comparison to the rather quiet stock intake.

Intake Features:

  • Highly meticulous carbon fiber air ducts
  • Reusable high-flow filters
  • Exact fitment from countless hours of design
  • Torque increase from cooler air

This item fits the following BMWs:
2004-2010 E63 BMW M6

2004-2010 E64 BMW M6

Part #: FRI-0314
Price: $2363.40 (USD) 
$2626.00 (Sale - Save 10%)
Quantity:   
Honest Wash Engine Bay Cleaning Kit

Make your engine bay covers and hoses shine like new with the Honest Wash Engine Bay Cleaning Kit. Dirt and grime find they're way into your engine bay and make your once-beautiful engine bay look like it hasn't been touched in years. With this kit you can have everything looking fresh off the line in no time!

Kit includes:

  • 32oz Bottle of Grease Lightning (degreaser)
  • 32oz Bottle of Cross Dressing (protective dressing)
  • 2 microfibers towels
  • 1 foam applicator 
Part #: HWKT-3
Price: $30.59 (USD) 
$33.99 (Sale - Save 10%)
Quantity:   
Honest Wash Car Show Prep Quick Detail Spray - 1 Gallon

Keep your car's shine bright with Honest Wash's Car Show Prep detail spray. Containing no acids or petroleum, this is a non-corrosive quick detailer perfect for removing light dust, dirt, and finger prints. In just a few minutes you can have your car looking great for a car show or a simple drive around town!

 

Made in the USA and is safe with PlastiDip and AutoFlex with no worry of scratching, peeling or fading.

Part #: HW03-1G
Price: $53.09 (USD) 
$58.99 (Sale - Save 10%)
Quantity:   
Honest Wash Bug Delete Bug, Tar, & Tree Sap Remover -- 32oz Easily remove the build up of dead bugs, tar, film, and tree sap from the front of your car in minutes with Honest Wash's Bug Delete. Bug Delete is strong enough to wash away the layers of contaminants without damaging any of the exterior surfaces of your vehicle. Its ingredients are non-caustic, non-corrosive, and has no harsh alkalies.
Part #: HW05
Price: $14.39 (USD) 
$15.99 (Sale - Save 10%)
Quantity:   
Honest Wash HyperMint Wash - Car Wash Soap 8oz Sample Honest Wash's HyperMint was is a concentrated soap that give off a fresh peppermint scent while efficiently lifting away dirt, grease, and grime from your vehicles paint. Made from a combination of synthetic detergents and emulsifiers, it is tough on dirt without being tough on any exterior surfaces or trim. It's high foaming formula is environmentally safe and requires only small amount of soap per wash, using on 2-8oz of soap per gallon of water.
Part #: HW01-S
Price: $3.59 (USD) 
$3.99 (Sale - Save 10%)
Quantity:   
Honest Wash Foam Sprayer Car Wash Starter Kit

Honest Wash's Foam Sprayer is perfect for covering your car in a thick layer of suds to make washing your car a breeze. Easy Connect and Disconnect with a quick release allows you to switch over to rinsing your car off in seconds. The Sprayer can be adjusted for the perfect amount of lather using the adjustable dial on the side. No pressure washer needed for this product, it connects directly to any standard garden hose.

Kit Contains:

  • Foam Sprayer
  • Fat Foamer Car Wash Soap
Part #: HWKT-9
Price: $44.99 (USD) 
$49.99 (Sale - Save 10%)
Quantity:   
Honest Wash Foam Sprayer Honest Wash's Foam Sprayer is perfect for covering your car in a thick layer of suds to make washing your car a breeze. Easy Connect and Disconnect with a quick release allows you to switch over to rinsing your car off in seconds. The Sprayer can be adjusted for the perfect amount of lather using the adjustable dial on the side. No pressure washer needed for this product, it connects directly to any standard garden hose.
Part #: HW28
Price: $35.99 (USD) 
$39.99 (Sale - Save 10%)
Quantity:   
Honest Wash Active Wax - Spray Wax 1 Gallon

Honest Wash's Active Wax is the best option for maintaining your vehicles feel and appearance in between car washes and wax applications. With a cherry scent in helps your car retain its shine and feel, while helping to protect from paint contaminants. Best used after car washes or before car shows to keep your car looking as good as possible.

Product details:

  • Provides a fresh shine and feel
  • Use in between waxing  
  • Easy to use, spray on and wipe away  
  • Lustrous cherry scent  
Part #: HW02-1G
Price: $58.49 (USD) 
$64.99 (Sale - Save 10%)
Quantity:   
Honest Wash Interior Cleaning Kit

Keep your dash, door panels, trim, and seats all looking good with the Honest Wash Interior Cleaning Kit. 

 

Kit Includes:

  • Grease Lightning (fabric cleaner)
  • Cross Dressing (plastic/rubber conditioner)
  • Glass Perfect (glass cleaner)
  • 2 microfibers towels
  • Foam applicator
Part #: HWKT-12
Price: $31.49 (USD) 
$34.99 (Sale - Save 10%)
Quantity:   
Honest Wash Complete Wax Kit

Keep your car's paint protected with Honest Wash's Complete Wax Kit. With both a foundation wax and a quick detail wax, you will be sure your car always looks as good as can be while still being protected from dirt, debris, and UV rays.

Kit includes:

  • 32oz bottle of Daily Defense Wax
  • 32oz bottle of Active Wax
  • 2 wax applicators
  • 2 plush microfiber towels
Part #: HWKT-4
Price: $49.49 (USD) 
$54.99 (Sale - Save 10%)
Quantity:   
Honest Wash Foam Applicator

Foam applicators can be used to apply a number of products to your vehicle for both interior and exterior surfaces. Great for waxes, polishes, dressings, tire shine, and more. Made with a high density foam handle and a soft foam application surface. There is a hexagon design that helps save product by using existing product as evenly and precisely as possible.

Product Details:

  • Perfect for waxing, polishing, or applying interior or exterior dressings
  • Hexagonal pattern to evenly spread product, avoiding waste
  • Soft foam will not scratch surfaces
  • Measurements: Length 4.75" , Width 2.25", Thickness 1.75"
Part #: HW24
Price: $3.59 (USD) 
$3.99 (Sale - Save 10%)
Quantity:   
Honest Wash Cross Dressing - Rubber, Plastic, & Vinyl - Cleaner & Conditioner 2oz Sample Take care of your interior and exterior plastic, rubber, and vinyl panels with Cross Dressing by Honest Wash, a multipurpose dressing that cleans, conditions, and gives your parts a glossy finish without leaving behind an oily residue. This helps prevent premature fading and aging on surfaces that have been neglected, making them look like new again.
Part #: HW30-S
Price: $2.69 (USD) 
$2.99 (Sale - Save 10%)
Quantity:   
Daily Defense Wax - High Grade Automotive Wax 32oz Restore your paint's deep gloss with Daily Defense Wax. Waxing your paint is essential to protecting the clear coat from UV Rays, road debris, and long term wear and tear. Consistently applying wax when needed will prolong the lifespan of your clear coat and finish.
Part #: HW10
Price: $20.69 (USD) 
$22.99 (Sale - Save 10%)
Quantity:   
Teddy Bear Microfiber Towel

The Teddy Bear is an ultra-thick polyester microfiber towel that will not leave behind lint and is perfect for cleaning, buffing, polishing, and more. I(t will not scratch or harm any of the vehicle's surfaces. great for even the most gentle areas needing polished and buffed.

Product Details:

  • Perfect for cleaning, buffing, polishing, & more
  • Ultra soft material will not scratch or harm surfaces
  • Lint-free polyester blend
  • Size: 16"x16" 
Part #: HW29
Price: $7.19 (USD) 
$7.99 (Sale - Save 10%)
Quantity:   
Honest Wash Chenille Microfiber Wash Mitt "The Shaggy" wash mitt is the perfect mitt to keep your paint free from scratches while still getting all the dirt and contaminants off of your paint. Normal sponges and brushes scratch your clear coat, damaging your paint more and more over time. The soft microfiber caterpillar pattern help prevent damage and is lint free. In addition, this mitt is also machine washable, letting you use, clean, and dry this mitt for years to come.
Part #: HW14
Price: $5.84 (USD) 
$6.49 (Sale - Save 10%)
Quantity:   
Honest Wash Microfiber Towel (10 pack)

The jack of all trades in the detailing world, the microfiber towel is the most used tool by far. Whether used for drying, buffing, polishing, applicating, or for just general cleeaning, you will be sure to go through a lot of these. Honest Wash can keep you stocked up with their premium lint-free microfiber towels.

Product Details:

  • Perfect for cleaning, waxing, polishing, & more 
  • Soft material will not scratch or harm surfaces 
  • Lint-free polyester blend 
  • Size: 14"x14" 
Part #: HW13-10
Price: $8.99 (USD) 
$9.99 (Sale - Save 10%)
Quantity:   
Honest Wash Car Show Prep - Quick Detail Spray 32oz

Keep your car's shine bright with Honest Wash's Car Show Prep detail spray. Containing no acids or petroleum, this is a non-corrosive quick detailer perfect for removing light dust, dirt, and finger prints. In just a few minutes you can have your car looking great for a car show or a simple drive around town!

 

Made in the USA and is safe with PlastiDip and AutoFlex with no worry of scratching, peeling or fading.

Part #: HW03
Price: $16.19 (USD) 
$17.99 (Sale - Save 10%)
Quantity:   
Honest Wash Glass Perfect - Streak-Free Glass Cleaner 1 Gallon Glass Perfect is the best cleaning choice to cover a range of surfaces including: tinted windows, windshields, side windows, mirrors, rear view mirrors, rear windows, headlights, chrome trim and grills, mag wheels, and interior panels including radio screens glass and instrument clusters. It cleans without leaving behind any streaks and completely ammonia free! Safe for PlatiDip and AutoFlex!
Part #: HW04-1G
Price: $44.09 (USD) 
$48.99 (Sale - Save 10%)
Quantity:   
Deluxe Foam Sprayer Car Wash Kit

Honest Wash's Foam Sprayer is perfect for covering your car in a thick layer of suds to make washing your car a breeze. Easy Connect and Disconnect with a quick release allows you to switch over to rinsing your car off in seconds. The Sprayer can be adjusted for the perfect amount of lather using the adjustable dial on the side. No pressure washer needed for this product, it connects directly to any standard garden hose.

Kit Contains:

  • Foam Sprayer
  • Fat Foamer Car Wash Soap
  • Microfiber Wash Mitt
  • Waffle Weave Drying Towel
  • 3.5 Gallon Bucket
Part #: HWKT-8
Price: $62.99 (USD) 
$69.99 (Sale - Save 10%)
Quantity:   
Honest Wash Microfiber Towel (1 pack)

The jack of all trades in the detailing world, the microfiber towel is the most used tool by far. Whether used for drying, buffing, polishing, applicating, or for just general cleeaning, you will be sure to go through a lot of these. Honest Wash can keep you stocked up with their premium lint-free microfiber towels.

Product Details:

  • Perfect for cleaning, waxing, polishing, & more 
  • Soft material will not scratch or harm surfaces 
  • Lint-free polyester blend 
  • Size: 14"x14" 
Part #: HW13
Price: $1.16 (USD) 
$1.29 (Sale - Save 10%)
Quantity:   
Honest Wash Active Wax - Spray Wax 2oz Sample

Honest Wash's Active Wax is the best option for maintaining your vehicles feel and appearance in between car washes and wax applications. With a cherry scent in helps your car retain its shine and feel, while helping to protect from paint contaminants. Best used after car washes or before car shows to keep your car looking as good as possible.

Product details:

  • Provides a fresh shine and feel
  • Use in between waxing  
  • Easy to use, spray on and wipe away  
  • Lustrous cherry scent  
Part #: HW02-S
Price: $2.69 (USD) 
$2.99 (Sale - Save 10%)
Quantity:   
Honest Wash Mud Cutter Off-Road Truck Wash Soap - 8oz Sample Mud Cutter from Honest Wash is perfect for removing thick layers or dirt, clay, and mud from your vehicle's surface after mudding or driving off-road and on job sites. Using both natural and synthetic detergents, it can remove the toughest contaminants without removing waxes or sealants. Washes while giving off a succulent orange scent.
Part #: HW31-S
Price: $3.59 (USD) 
$3.99 (Sale - Save 10%)
Quantity:   
Honest Wash Brake Dust Professional Wheel Cleaner -- 2oz Sample Tired of scrubbing every inch of your wheels to get rid of brake dust? Honest Wash's Brake Dust Professional wheel cleaner can be sprayed on and, after just a few minutes, be sprayed off to reveal a clean, bright wheel. No scrubbing needed. Tough enough to remove brake dust while gentle enough to keep from hurting wheels that are painted, powder coated, anodized, machined, and dipped. Safe for alloy rims.
Part #: HW11-S
Price: $2.69 (USD) 
$2.99 (Sale - Save 10%)
Quantity:   
Liqui Moly Radiator Cleaner - 300mL

Deposits in the radiator can lead to inefficient cooling or improper temperature readings. Long term exposure to high temperatures can cause internal engine components to warp or become damaged without proper cooling. This Liqui-Moly Radiator Cleaner reliably removes these deposits without adversely affecting the rest of the cooling system, allowing the cooling system to run efficiently, cooling the engine to proper operating temperatures. 

This does not contain any acids or alkali's and is acid neutralizing.

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Part #: 2051
Price: $6.26 (USD) 
$6.95 (Sale - Save 10%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Wheel Center Cap - Priced each Missing center caps can be a pain. Restore the looks of your car and replace your lost or missing center caps.
Part #: 361310610
Price: $21.60 (USD) 
$27.00 (Sale - Save 20%)
Quantity:   
Complete Turner Baffled Oil Catch Can Kit - Standard Flow 8oz

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

  • 6061-T6 billet machined body, anodized black for lasting protection and appearance
  • Strategically positioned 4 chamber baffle system maximizes oil / air separation 
  • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
  • Sealed with a pre-installed viton O-Ring
  • Includes 2.5mm allen key to remove baffle plates for cleaning
  • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
  • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
  • Optional use drain hole - drain kit included!
  • Universal mounting kit
Part #: 022798tms01-07KT
Price: $161.46 (USD) 
$189.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
E60 Xi, E82 1M, E84 X1, E9X 335/M3 Front Cool Carbon S/T PLUS Performance Brake Pad Set

Owned and operated by performance driving enthusiasts, Cool Carbon Performance not only has the German pedigree known for engineering rigor and excellence, but their experience with club, track and racing events has given them a special sensitivity to the unique needs of today's daily street performance drivers.

For their latest Street Performance PLUS Brake Pad release, special consideration was given to build materials and R&D test results.

In Cool Carbon's new dedicated brake pad facility, they've developed a new proprietary “low-Met” formula utilizing Twaron Aramid fibers, similar to Kevlar material, that rapidly dissipates heat and resists wear and was developed and subjected to a test protocol that included friction, temperature, and wear monitoring.

The stunning results of these efforts are seen in their real world performance: greater linear and predictable initial bite that the previous S/T pads, consistent braking torque, superior resistance to heat-cycling, proven fade resistance, and crucially reduced dust levels.

BMW owners will also notice a welcomed measure of practicality and drivability with Cool Carbon products. The “grabby” tendency often felt with OEM BMW brakes is eliminated; the CC brake compound allows for a much more controllable and linear application of brake pressure and a much greater degree of modulation.

Features:

  • Excellent for spirited street driving and light to moderate track use
  • Increase in stopping power while remaining street friendly
  • Very linear, smooth pedal modulation
  • Low to no noise or dust - rotor friendly!
  • Faster heat dissipation allowing consistent performance at higher temperatures, even greater than previous S/T pad's performance
  • Processed using “true positive molding”; pads molded individually to pressure for exacting performance; density and compressibility specifications are controlled for each pad, maintaining specific performance attributes.
  • Developed at an all new German R&D facilities; tested extensively on the German autobahn; fine tuned at the renowned Nurburgring race circuit
  • New brake pad curing process and triple scorching for a faster initial bedding period
  • New pad formula with Twaron Aramid in the composite for greater thermal stability and better long term durability compared to other high performance pads
  • Improved break pad shims for more efficient noise reduction

Turner Motorsport recommends using the Cool Carbon Street Performance rear brake pads to maintain an ideal braking balance, preventing major brake bias or uneven wear characteristics.

This item fits the following BMWs:
2011 E82 E88 BMW 1M Coupe
2006-2011 E90 BMW 335d 335i 335xi M3 - Sedan
2007-2013 E92 BMW 335i 335is 335xi M3 - Coupe
2007-2013 E93 BMW 335i 335is M3 - Convertible
2004-2010 E60 BMW 525iA 525xi 528xi 530xi 535xi
2011-2015 E84 BMW X1 xDrive35i

Part #: 7799-D918PL
Price: $118.36 (USD) 
$147.95 (Sale - Save 20%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben European Car Electrical Terminal Tool Kit - 12 Pieces

This tool comes in handy especially when working with an engine harness. Certain areas are always prone to corrosion and this tool makes having to re-pin a connector a breeze.

Unlike small screwdrivers, picks, and paper clips, these tools are the correct size and shape to remove and install tiny electrical pins and terminals at plastic block connectors with ease, and will not damage the connectors in the process.

Packaged in a blow molded case to keep everything secure and organized.

Part #: ce-70-2
Price: $80.00 (USD) 
$89.95 (Sale - Save 11%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Impact Screwdriver Kit - 6 Pieces

The impact driver is a fast and effective way to remove tight or corroded screws and bolts, reducing the chance of rounding off--or rounding out--the fastener head. Insert a slotted or Phillips head screwdriver bit into the driver.

For stubborn bolts, remove the black screwdriver bit adapter head, and replace it with any 3/8 - inch drive socket.

Features:

  • Impact driver tool with red rubber grip 
  • Four screwdriver bits (2 Phillips; 2 slotted) 
  • 3/8 - inch drive bit holder

 

Part #: pcs2800
Price: $12.71 (USD) 
$16.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
ECS Tuning Wheel Spacer & Bolt Kit - 15mm - 72.6mm CB

Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

This kit includes wheel bolts that are lab tested to meet or exceed ISO 898 class 10.9 mechanical and physical properties to ensure perfect fastening of the wheel to the hub with no issues or potential to snap under aggressive driving conditions.

ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

 

This item fits the following BMWs:

2008-2012 E82 BMW 128i 135 1M
​1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Part #: ECS#255KTWB
Price: $89.21 (USD) 
$104.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
ECS Tuning Wheel Spacer & Bolt Kit - 12.5mm - 72.6mm CB

Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

This kit includes wheel bolts that are lab tested to meet or exceed ISO 898 class 10.9 mechanical and physical properties to ensure perfect fastening of the wheel to the hub with no issues or potential to snap under aggressive driving conditions.

ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

 

This item fits the following BMWs:

2008-2012 E82 BMW 128i 135 1M
​1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Part #: ECS#254KTWB
Price: $84.96 (USD) 
$99.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Liqui-Moly Race Tech GT1 10w-60 Engine Oil - 5 Liters

Synthoil Race Tech GT1 is a modern hig performance engine oil formulated for engines that are experience extreme load pressures. Fully synthetic, the oil combines base oils and additives to provide exception lubrication and engine wear protection. This design and composition makes it a great choice to used for racing and other demanding needs. Great for both gasoline and diesel engines.

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Part #: LM2024
Price: $40.40 (USD) 
$44.89 (Sale - Save 10%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 12-19mm Multi size Socket Wrench

The Schwaben 8-in-1 drain plug socket wrench. Take one wrench that fits most common metric drain plugs with external hexagonal heads. Six-point socket heads grip securely and won’t round off plug heads.

Features:

  • Made of vanadium steel with polished chrome finish
  • Strong magnet on the side of the handle to hold the drain plug until you are ready to reinstall it
  • Sizes include: M12, M13, M14, M15, M16, M17, M18, and M19
Part #: W-136PM
Price: $14.96 (USD) 
$19.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 1/2

Proper torque is very important when it comes to working on engines. The importance comes from proper sealing and to keep from damaging threads.

Features:

  • Reversible ½-inch drive click-to-stop
  • Torque range of 10 to 150 ft-lb
  • Accurate to within +/-4%
  • 18 inches in length with a convenient carry case
Part #: TW-12450
Price: $29.96 (USD) 
$39.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Strut Nut Socket - 22mm To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.
Part #: 003046SCH01A-04
Price: $11.21 (USD) 
$14.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Radio Removal Tool Kit - 32 Pieces

The radio removal tool make removal of the stock radio easy, offering just the right design so there is no damage.

Features:

  • 32-piece Master Radio Removal Kit removes most German radios, plus radios in many Asian and Domestic makes
  • Come in a handy blow-molded case with silhouetted compartments for each tool, making it easy to transport and keep track of individual keys and tools
  • Many keys have comfortable rubber padded grips
Part #: AAR-32PCS
Price: $37.46 (USD) 
$49.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
aFe ProDry S Air Filter - E60 545i 550i, E63 E64 645ci 650i This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This particular filter fits the following BMWs:

E60 5 series : 545i 550i 2004-2010

E63 6 series : 645ci 650i 2004-2010

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
Part #: 31-10145
Price: $110.70 (USD) 
$123.00 (Sale - Save 10%)
Free Shipping Free Shipping
Quantity:   
Schwaben Locking Hose Clamp Pliers

These Schwaben flexible reach hose clamp pliers can reach where others can not.

Feature:

  • Spring loaded clamp with a 24" cable
  • Designed to remove metal or plastic self-tightening hose clamps
  • Work with diameters from 11/16" to 2-1/2" ( 18 to 54mm)

These pliers feature a spring loaded clamp with a 24" cable and will lock onto the clamp and hold open for easy removal. These pliers are designed to remove metal or plastic self-tightening hose clamps with diameters from 11/16" to 2-1/2" ( 18 to 54mm).

Part #: 004170SCH01A
Price: $29.21 (USD) 
$38.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Telescoping Hood Prop

It only takes a gust of wind to have your hood crashing down on your head, or if you have a carbon fiber hood and no longer have the gas struts than this could be what you need.

 This hood prop is adjustable, lightweight, and sturdy making it easy to keep out of the way in the trunk so it's there whenever you need it. 

Part #: 006056SCH01A
Price: $14.96 (USD) 
$19.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Trailer Ramps 5

Is your trailer door ramp too steep to get your car into the trailer, 

Load your vehicle safer and easier with Schwaben trailer ramps. Our trailer ramps create a more gradual angle to prevent spoiler damage when loading and unloading vehicle into or out of trailer.

Features:

  • These ramps work on cars weighing up to 6,000 pounds
  •  Ideal for low ground clearance cars with extra wide tires.
  • Will not scratch or mark your floors!
  • Will not scoot, slip or slide no matter the surface
  • Will not damage trailer door or trailer
  • Light weight at only 15 lbs
  • Highly durable, virtually indestructible, and very stable
  • Ramps have built in straps to allow transport or ability to be hung on the wall.
  • 67" long, 14" wide, 5" tall.

Note: if your current stock trailer ramps have an additional fold down ramp, we suggest you either fold it up or remove it.

Part #: 006167SCH01A
Price: $231.00 (USD) 
$308.00 (Sale - Save 25%)
Quantity:   
Wheel Chocks - Pair Always make sure to chock your wheels when lifting one end of the car, this ensures the car stays in place and up in the air.
Part #: 006190SCH01A
Price: $24.00 (USD) 
$32.00 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 2-pc 67

These ramps never scoot, slip or slide while rolling onto the ramps.All that said means these ramps are easy to drive up on and very safe. Our Schwaben ramps will never scratch or blemish your floors.

Having ramps to use offers more than just convenience, it offers safety. Laying under a car working is much easier to do knowing the car is resting the wheels on a firm surface.

Please refer to chart below to see if these 67" Schwaben ramps are right for you vehicle.

1. Take a yardstick, and wedge it under the front edge of front tire.

2. Raise it up until it hits the underside of your car( the spoiler)

3. Measure from the tip of the yardstick to the ground, vertically.

 67 " long,14" wide, 10" lift height, at 15 lbs each and a low 10.8 degree incline.

If your measurement is 7.25" or greater, you can clear these ramps with no problem. 

 

For increased safety, use wheel chocks with all Schwaben Ramp products.

Part #: 006160SCH01A
Price: $264.00 (USD) 
$352.00 (Sale - Save 25%)
Quantity:   
Schwaben Deep Well Impact Socket - 46mm

This large socket is the perfect tool for axle nuts when servicing the axle shafts or wheel bearings.

Features:

  • ½-inch drive 46mm 12-point socket
  • Specially hardened to take the added abuse from a impact gun
  • Coated for added protection and so you can tell it apart from non impact rated sockets
  • 75mm depth  to accommodate many applications and different length shafts
  • Made of durable chrome moly steel

 

 

Part #: 003302SCH03A
Price: $14.96 (USD) 
$19.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Aluminum 3-Ton Jack Stands - Pair

Safety is always the most important factor when it comes to working under your car, jack stands are highly recommended. 

 

Features:

  • Ultra light  jack stands only weigh 4.7 lbs each
  • All aluminum construction with heavy-duty  flanged bases to safely stabilize loads
  • 6 locking positions for a secure load in multiple heights
  • Extra heavy duty load pin at .584 in. diameter with a posi lock ball to insure it stays in place
  • Min. Height is 10.6
  • Max Height is 15.4"
  • Large 7" diameter base
  • Outer support tube is 2-1/8" in diameter

 

Part #: 005945SCH01A
Price: $64.46 (USD) 
$85.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Professional Quality Deluxe Two Shelf Service Cart

Having convenient carts make organizing a breeze and passing that on to getting the job done well.

Features:

  • Beautiful & durable high gloss black powder coated finish
  • 350lbs load capacity supports heavy tools, parts and equipment
  • Dual handles allow Push-Pull from either side for better maneuverability
  • Rugged thru tray frame construction for stable support
  • 3" Deep trays 
  • Large, easy to maneuver 4" ball bearing casters (2 are locking)

 

Dimensions:

  • Height - 35.3"
  • Length - 30"
  • Width - 16"
  • Weight - 37.5lbs
Part #: 005947SCH01A
Price: $89.95 (USD) 
$117.95 (Sale - Save 24%)
Free Shipping Free Shipping
Quantity:   
Schwaben 3/8

A professional quality ratchet with a fine satin finish for comfort, durability, and easy clean-up.  

Features:

  • 200mm(7.75") long ratchet
  • Special designed 72T gear mechanism uses only 5 degree handle movement between gears
  • Push button release holds socket tight until you are ready to release. No more dropped sockets

Limited Lifetime Warranty 

 

Part #: 005985SCH01A
Price: $17.21 (USD) 
$22.95 (Sale - Save 25%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
E60 Xi, E82 1M, E84 X1, E9X 335/M3 Front Cool Carbon S/T Performance Brake Pad Set

Cool Carbon S/T brake pads have excellent stopping power and feel with low levels of dust and noise. Engineered for European cars with high speed development on the Autobahn, Cool Carbon is a sporty compound intended for every day use. The S/T compound has more stopping power and initial bite than stock thanks to a higher coefficient of friction and composite materials. We are big fans of these as a sporty street pad and recommend them for medium-aggressive street driving and autocross.

  • High performance for street use
  • Excellent friction/torque at various temperatures
  • Great feel and modulation
  • Low noise
  • Low-medium dust
  • rotor friendly

Cool Carbon pads are sold as a set for each axle (4 pads total).

This item fits the following BMWs:
2011 E82 E88 BMW 1M Coupe
2006-2011 E90 BMW 335d 335i 335xi M3 - Sedan
2007-2013 E92 BMW 335i 335is 335xi M3 - Coupe
2007-2013 E93 BMW 335i 335is M3 - Convertible
2004-2010 E60 BMW 525iA 525xi 528xi 530xi 535xi
2011-2015 E84 BMW X1 xDrive35i

Part #: 7799-D918
Price: $115.15 (USD) 
$127.95 (Sale - Save 10%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
E63 650i Supersprint Section 1 Straight Pipes (Left and Right)

Free ground shipping! 

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

NOTE: Supersprint engineers and manufactures complete exhaust systems. This part was designed to be used with the rest of the Supersprint system on this car but may be used on its own. Contact us for more details.

Part #: 788512
Price: $330.15 (USD) 
$440.20 (Sale - Save 25%)
Free Shipping Free Shipping
Quantity:   
E63 645ci Supersprint Right Performance Muffler (2x80mm Tips)

Free ground shipping! 

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

NOTE: Supersprint engineers and manufactures complete exhaust systems. This part was designed to be used with the rest of the Supersprint system on this car but may be used on its own. Contact us for more details.

Part #: 788506
Price: $690.14 (USD) 
$920.18 (Sale - Save 25%)
Free Shipping Free Shipping
Quantity:   
Brembo Calipers Lotus, A, C, F - Street Brake Pad Set - StopTech Street Performance The StopTech Street Performance brake pads just may be the best all-around pad on the market today. Manufactured from a proprietary para-aramid material (similar to Kevlar) that works well when cold, produces a strong initial bite, fade-resistant on the track, and low noise and low dust. It's unbeatable performance for the price! The Street Performance compound is standard in all StopTech big brake kits and are now available for your Brembo calipers.

This pad set fits the following Brembo 4-piston calipers:
Lotus / Type A / Type C / Type F

Lotus calipers are found in many Brembo GT Big Brake Kits, including these BMW models:
1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
1997-2003 E39 BMW 525i 528i 530i 540i M5
1982-1989 E24 BMW 633csi 635csi M6
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009+ Z4 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
2002-2006 R50 MINI MINI Cooper
2005-2008 R52 MINI MINI Cooper Convertible, MINI Cooper S Convertible.
2002-2006 R53 MINI MINI Cooper S
2007+ R56 MINI MINI Cooper, MINI Cooper S
2007+ R55 MINI MINI Cooper Clubman, MINI Cooper S Clubman
2007+ R57 MINI MINI Cooper Convertible, MINI Cooper S Convertible,
2011+ R60 MINI MINI Cooper Countryman, MINI Cooper Countryman s
Part #: TMS16487
Price: $80.06 (USD) 
$88.95 (Sale - Save 10%)
Quantity:   
Brembo Calipers F40, F50, B, H, GT1 - Street Brake Pad Set - StopTech Posi-Quiet Extended Wear These Extended Wear brake pads from StopTech/Centric are a great low-cost solution to pad wear and brake dust. The focus on these pads is a long pad life with as little brake dust residue as possible. These are street pads only and will not have the same bite and torque values as more high-performance pads. But if you're looking for a capable and user-friendly pad for daily use, these are great.

This pad set fits the following Brembo 4-piston calipers:
F40 / F50 / Type B / Type H / GT1 / Monobloc P

F40 calipers are found in many Brembo GT Big Brake Kits, including these BMW models:
2008-2012 E82 BMW 128i 135i 1M Coupe
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
2012+ F30 BMW 328i 335i - Sedan
1989-1995 E34 BMW 525i 530i 535i 540i M5
1997-2003 E39 BMW 525i 528i 530i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
2010+ F07 BMW 535i GT, 535i xDrive GT, 550i GT, 550i xDrive GT
2011+ F10 BMW 528i 535i 535i xDrive 550i 550i xDrive M5
2004-2011 E63 BMW 645ci 650i M6
2012+ F13 BMW 640i 650i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
2002-2008 E65 BMW 745i 745li 750i 750li 760i 760li
2009+ F01 BMW 740i 740li 750i 750li 750i xDrive 750li xDrive 760li
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
2011+ F25 BMW X3 xDrive28i X3 xDrive35i
2000-2006 E53 BMW X5 3.0i X5 4.4i X5 4.6is X5 4.8is
2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive35d X5 xDrive35i X5 xDrive48i X5M
2008+ E71 BMW X6 xDrive35i X6 xDrive50i X6M
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009+ Z4 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Part #: TMS16481
Price: $53.96 (USD) 
$59.95 (Sale - Save 10%)
Quantity:   
Posi Quiet Brake Pads - Front - E60, E63, E65, E82 1M, E9X 335, E9X M3 Centric Posi Quiet Brake pads surpass the braking performance of stock pads but do it with far less dust. This semi-metallic pad compound is very easy to use on the street with excellent feel and initial bite and low noise. But the best thing we like with these pads is how little dust they produce. You will be amazed at how little dust there is on your wheels after a week of use. These are a great replacement pad for fans of the discontinued PBR Metal Master Pads.

Position: both front calipers

This item fits the following BMWs:
2008-2012 E82 BMW 1M Coupe
2006-2011 E90 BMW 335d 335i 335xi 335i xDrive - Sedan
2007-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 335i - Convertible
2006-2011 E90 BMW M3 - Sedan
2007-2013 E92 BMW M3 - Coupe
2007-2013 E93 BMW M3 - Convertible
2004-2010 E60 BMW 525i automatic transmission only
2004-2010 E60 BMW 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i
2004-2011 E63 BMW 645ci 650i
2002-2008 E65 BMW 745i 745li 750i 750li 760i 760li
Part #: TMS209141
Price: $47.66 (USD) 
$52.95 (Sale - Save 10%)
Quantity:   
Tool - 22mm 3/8 Drive 12-point Socket 22mm hex socket with 3/8" drive.
Part #: 02010022
Price: $18.66 (USD) 
$21.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Water Pump Pulley Holder for Removal of Fan Clutch Replacing the fan clutch on most BMW models requires holding the water pump pulley while removing the fan clutch lock nut. With less than 1 1/2" clearance on some models this project can easily turn into a mechanical nightmare. Using our special slim line fan clutch wrench in conjunction with the appropriate pulley spanner, the removal and installation required only a few moments.
Part #: 143240
Price: $28.01 (USD) 
$32.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Stealth Bulb Side Marker Bulbs (Set) Stealth Bulb Side Marker Bulbs (Set). Fits most BMW side marker indicators. No more ugly orange egg yolk look in your clear corners. Check your stock bulb and compare to photo before ordering.
Part #: TMS450
Price: $25.46 (USD) 
$29.95 (Sale - Save 15%)
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Turner Motorsport Custom Tough Case iPhone 4 / 4S The best iPhone case just got a bit better! We've taken the Tough Case iPhone cover and customized it with a photo of the Turner Motorsport #96 E92 M3, running hard at Barber Motorsports Park.

The Tough iPhone 4 / 4S case uses dual layers of resilient material for a rugged case that protects the object of your affection with a defensive style. The base layer is a form-fitting silicone skin that completely surrounds the iPhone 4 / 4S, adding a layer of cushion that absorbs shocks and impacts.The outer layer is an impact resistant, polycarbonate hard shell fits that fits directly on top of the silicone skin for extra iPhone protection.A solid finish makes the iPhone 4 / 4S case easy-to-hold, while the streamlined design keeps the silhouette slim enough to fit in your pocket.

Dimensions: 4.62 x 2.39 x 0.45 in (117.2 x 60.6 x 11.3 mm)
Part #: 96-IPHONE
Price: $17.50 (USD) 
$24.95 (Sale - Save 30%)
$24.95
Limited Qty Sale
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Cross-Drilled & Slotted Brake Rotors - Front - E60 535/545i/550i & E63/E64 645i/650i (Pair) Slotting a rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The slots in our rotors allow the gases to escape giving better braking performance. Cross-drilling a rotor is a way to improve initial pad bite. With the additional leading edges at each hole, the pad is able to grab the rotor just a little bit harder.

By combining both Cross-drilling and slotting, these rotors combine the best of both worlds. Fewer holes mean longer pad life with little penalty in the way of initial pad bite.

These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

These front brake discs / rotors fit:
2004-2010 E60 5 Series 535i 545i 550i sedan
2004-2010 E63 6 Series 645Ci, 650i Coupe & Convertible
Part #: 34116763824CDS
Price: $226.71 (USD) 
$251.90 (Sale - Save 10%)
Quantity:   
19mm 12x1.5 Turner Yellow Zinc-Coated Race Wheel Nut Turner Motorsport’s five years of endurance competition has taught us many things. One was that not all lug-nuts are made the same. While the standard nuts that we sell are great for daily drivers, HPDE events, and club racing, a beefier and more durable nut was needed for the 3-hour, 6-hour, and 24-hour professional endurance races. During the 24 Hours of Daytona, our crew guys made over 80 tire changes in NASCAR-style pitstops. That kind of abuse from air guns and fast work required the "next level" of lug-nut. These nuts are a high-grade steel with a zinc coating and they incorporate several innovative features.

The wheel-side of the nut has recessed threads so that the nut has to be square to engage the threads. Without the recess, it’s far too easy to start the threads with the nut being crooked.

The 19mm head of the nut is slightly rounded to help the socket find its position.

The zinc plating that we use is reasonably durable without being excessive. With too much coating, the chipped and worn coating fragments can end up in the threads, leading to all sorts of trouble. Anyone who has used nuts repeatedly knows that the coating is not going to last forever. The constant abuse from air guns will chip it all away. So why add weight and the potential for disaster with excess coating? We did away with most of the danger from that with a lighter coating that still resists the tough environment of the track.

Features:
  • Developed for our Grand-Am / Continental race team
  • High grade steel to withstand the extreme abuse of air guns and race conditions
  • Bright yellow zinc plating to help tire changer zoom in on their target quickly and accurately
  • Minimal plating won’t result in excess coating wearing off and “gumming up” the threads
  • 19mm hex to prevent rounding off
  • Rounded top for fast socket engagement
  • Recessed threads to aid in fast nut-to-stud alignment without cross threading
  • We recommend using with Turner Motorsport bullet nose dry-lube wheel studs
    Price is per nut.
  • Part #: TWH9952R19
    Price: $3.71 (USD) 
    $4.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Turner Motorsport Brake Bleeder Bottle with Check Valve - Simple Bleed This is the new evolution of our popular Brake Bleeder Bottle. The latest design features a one-way check valve inside the bottle that is operated when you pump the brakes. This is a more economical and simpler system than other "1 man bleeding" kits - no modification to your brake system and you only have to buy the one bottle. The newest bottles also include upgraded caps and fittings for a tighter seal.

    The one-way check valve is extremely simple to use - attach the bottle and hose, open your bleed screw, and pump your brakes from the pedal. The check valve opens with each pump to let fluid and air out of the system and then seals tight when the pedal is released. The bottle uses a large magnet to conveniently stick to your brake disc while you run the hose to the caliper.

    Works on just about all brake systems so no need to have specialized adapters or bleed screws.
    Part #: BBMCV
    Price: $18.66 (USD) 
    $21.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Tool - 27mm 1/2 Drive 6-point Socket 27mm hex socket with 1/2" drive.
    Part #: TMI9910M27
    Price: $22.95 (USD) 
    $27.00 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    E60, E63, F10, F12 Exact-Fit Stainless Clutch Line

    This braided stainless steel line replaces the stock hydraulic hose connecting your clutch slave cylinder to the clutch master cylinder. There are several deficiences with rubber, especially as it ages - when new the rubber expands and swells under pressure and the pedal can feel spongy. As rubber ages and is exposed to extreme temperatures the rubber can harden and even shrink (common on brake hoses), which results in a stiff pedal. Rubber clutch lines do not stand up to the stresses of hard use. ECS Exact-Fit stainless reinforced clutch lines provide more confident and dependable shifting by maintaining consistent line pressure, long lasting corrosion resistance, and increased protection from failure. These lines are reinforced with braided stainless steel mesh, affording superior expansion resistance. This resistance to expansion creates a firmer pedal, and a more direct clutch pedal feel. The signature red polymer coating provides additional protection from the elements and abrasion.

    This particular stainless steel clutch line fits the following BMWs:
    2004-2010 E60/E61 5 Series 
    2004-2010 E63/E64 6 Series (manual transmission only, no SMG)
    2011-20116 F07/F10 5 Series 
    2011-2016 F06/F12/F13 6 Series

    Part #: 018166ECS01A
    Price: $29.71 (USD) 
    $34.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Sprint Booster V3 Drive-by-Wire Enhancement Module For 2001+ BMW

    When BMW began using the "Drive-by-wire" throttle system in 2001, a lot of people cringed. The Drive-by-wire system uses electronics to replace the mechanical cable throttle of the past. This means the electronics between the accelerator pedal and motorized throttle must interpret what your right foot does, and ultimately decides how the engine will respond. Although advanced in it's technology and engineering, many of us agree that the Drive-by-Wire equipped BMWs feel unresponsive and lack the crisp, sharp throttle response that older BMWs had with a traditional throttle cable. That's where the Sprint Booster comes in.

    The Sprint Booster is an in-line "plug and play" module, that remaps the Drive-by-Wire throttle curve to be much quicker than stock programming. It removes the "lag" or delay that exists in the stock electronic mapping. The result is sharper, quicker throttle response and immediate power delivery.

    NEW! The Sprint Booster V3 are now out!

    This update brings with it some exciting new features that give you a much wider choice of selections including:

    • 36 Acceleration Programs
    • Valet Mode
    • Pedal Lock Mode
    • 3 year Warranty


    We found the difference to be NIGHT AND DAY, and were instantly smitten by the snappier feel the Sprint Booster gave to both a stock BMW as well as on a modified BMW. What's more - the Sprint Booster installs in just a few minutes at the back of the gas pedal. Simply release pedal from the pedal base by unlocking the locking tab, pull the pedal up/foward, unplug the harness, and plug in Sprint Booster. Here's an example of how simple the install is -- installation on an E46 3 series. Full for 3 series installation instructions, click here.

    How does it work? The Sprint Booster listens to the pedal input signal, and sends an improved signal to the ETC (electronic throttle control) which has been amplified or "boosted", so that the throttle is more responsive throughout the entire rpm range.


    This product qualifies for FREE FEDEX GROUND shipping within the 48 contiguous United States.

    The Sprint Booster is available for the following BMWs:
    2008+ E82/E88 1 Series including 128i & 135i
    2016+ F87 BMW M2
    2001-2006 E46 3 Series including 325i, 325Ci, 330i, 330Ci
    2001-2006 E46 M3 coupe & convertible (manual & SMG!)
    2006+ E90/E91/E92/E93 3 Series including 325i, 325xi, 328i, 328xi, 330i, 330xi, 335i & 335xi
    2008+ E90/E92/E93 M3 coupe, sedan & convertible
    2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan
    2013+ F31 BMW 328i xDrive 328d xDrive - Wagon
    2014+ F34 BMW 328i xDrive GT, 335i xDrive GT - Gran Tourismo
    2013+ F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe
    2013+ F33 BMW 428i Convertible 428i xDrive Convertible 435i Convertible 435i xDrive Convertible- Convertible
    2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe
    2015+ F82 BMW M4
    2001-2003 E39 BMW 525i 530i 540i
    2004+ E60/61 5 Series including 525i, 525xi, 528i, 528xi, 530i, 530xi, 535i, 535xi, 545i, 550i & M5
    2004+ E63/E64 6 Series including 645i, 650i & M6
    2002+ E65/E66 7 Series including 745i, 745Li, 750i, 750Li & 760Li
    2003+ Z4 & MZ4 Roadster & Coupe including Z4 2.5, 3.0 and M
    2001+ X3/X5/X6 SAV (all)

    Part #: SBBM1003
    Price: $231.99 (USD) 
    $289.99 (Sale - Save 20%)
    Free Shipping Free Shipping
    Turner Motorsport Reverse Flow 6oz Baffled Catch Can

    When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

    Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain hole can be used with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

    Features:

    • 6061-T6 billet machined body, anodized black for lasting protection and appearance
    • Strategically positioned 4 chamber baffle system maximizes oil / air separation 
    • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
    • Sealed with a pre-installed viton O-Ring
    • Includes 2.5mm allen key to remove baffle plates for cleaning
    • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
    • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
    • Optional use drain hole (valve and hose sold separately, watch for our model specific drain kits!)
    Part #: 022798TMS01-04
    Price: $118.96 (USD) 
    $139.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    Quantity:   
    Limited Edition #96 Turner Motorsport M6 GT3 Minichamps - 1 Of 402

    Turner Motorsport was created with the vision of bringing ultra high performance BMW accessories to avid enthusiasts at a reasonable price. Will Turner opened the doors to his 6500 square foot R&D facility in 1993 - since then the company has seen incredible growth and accomplishment. Most recently, Turner Motorsport participated in the IMSA United Sportscar Championship. Drivers Jesse Krohn and Jens Klingman were able to pilot the Number 96 Turner Motorsport M6 GT3 through the pack and finish fourth overall during the 2017 season.

        While not on the racetrack, the team at Turner can be found designing and testing new products perform just as well on the track as they do on the street. For example, Turner’s E46 rear subframe reinforcement kit resolves a real world problem, the E46’s rear subframe mounting points, by creating a solution that prevents further damage and can be used to remedy and already cracked subframe area. In this way, an extremely detrimental problem can be repaired or prevented no matter what type of driving style the vehicle endures. This is just one example of the philosophy behind Turner Motorsport being put to work in every product they design.

        When it comes to sourcing elusive motorsport specific parts, Turner delivers again. As an authorized dealer, Turner carries a wide range of racing specific parts from BMW Motorsport. Anything from full conversions, such as the M235iR conversion kit, to the more esoteric offerings like the E30 M3 Evo racing pulley kit.

        Now you can bring home a piece of Turner Motorsport History with this beautifully constructed diecast model of the Turner M6 GTD car. This is the same one driven by Jens Klingman and Bret Curtis at Circuit of the Americas in the 2016 season. Accurate and breathtaking detail are at the forefront of this limited edition 1/43 scale model. Only 402 are left so get yours before the checkered flag drops!

     

     

    Part #: 96M6GTSMINICHAMP
    Price: $72.21 (USD) 
    $84.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    Quantity:   
    Schwaben 3/8

    Looking to update your old torque wrenches? The Schwaben 3/8" Drive Digital Torque Wrench is your answer. 

    This digital torque wrench uses an easy-to-read display to show torque amounts and settings, features a push button release, reversible 3/8" drive, 45 tooth ratchet head, and a comfortable no-slip grip and adjustment wheel.

    Specifications:

    • Setting Range: 15-80 ft lbs (20-110 Nm)
    • Display Units: ft-lbs, N-m, Inch-lbs, cm-kg2, and m-kg
    • Size: 16" (370mm) length
    • Accuracy: +- 3%
    • Include blow molded holding case
    • Requires one 3V CR2030 battery (included)
    Part #: 023382SCH01A
    Price: $82.46 (USD) 
    $109.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Driveshaft - E63 E64 650i Automatic Transmission

    Got a vibration through the driveline on your BMW? Did you know that the u-joints are not replaceable on a factory driveshaft?Our remanufactured driveshafts allow for future replacement of u-joints and are rebuilt to a higher specification than the factory driveshaft.We start with OEM u-joints and then machine yokes onto the driveshaft to allow for future u-joint replacement.All bushings, universal joints, center bearings are replaced with new hardware (flex discs are not included but available separately).The whole unit is then dynamically balanced on a precision Axiline Balancer.

     

    Included in the price of the driveshaft is the core charge of $150 and a UPS return label, so you can return your core for refund quickly, easily and without additional expense.

    This item fits the following BMWs:

    2005 - 2010 E63 E64 BMW 650i - Automatic Trans

    Part #: 479xKT
    Price: $798.84 (USD) 
    $887.60 (Sale - Save 10%)
    Quantity:   
    E60 M5 06-10 Stage 1 Turner Motorsport Performance Package

    2006-2010 E60 M5, E63 M6 Stage 1 Performance Package  
    Power Gain @ Peak Output:  +35hp / +35ft-lbs  
    Rev limit:  8250 or 8500  
    Octane:  91  or higher 

    Carefully selecting some of our least-invasive, best bang-for-your-buck S85 hardware, paired with our Stage 1 Performance Software yields impressive results that can be completed in an afternoon!

    TURNER POWER PULLEY
    Our Power Pulley reduces rotational mass and safely under drives your belt driven auxiliaries for reduced parasitic power loss. The end result: More power to your M5 or M6's rear wheels! Designed to give the best performance benefit with no sacrifices or compromises to your BMW's reliability. These have been tested on hundreds of cars before public release and there are simply NO DOWNSIDES to this upgrade. CNC machined using aircraft grade 6061 aluminum billet, and anodized with a stealthy black coating. Others may advertise "their" crank pulley boasting higher numbers (using a smaller pulley profile), but we have concluded that for street and track driven M5 and M6, this is the best size and design to ensure proper engine temp and auxiliary functionality. As the S85 V10 engine doesn't use a traditional harmonic balancer, all factory harmonics and dampening are fully and properly retained. We've found this pulley alone adds 18 to 22 HP and 17 to 21 Ft/lbs Torque on a stock M5 or M6 with no other mods(!!).

    The E60 M5 / E63 M6 Power Pulley Kit includes:

    • (1) Underdrive Crank Pulley
    • (1) Correctly Sized Drive Belt
    • (6) Allen Head Bolts
    • (1) Installation instructions

    TURNER INTAKE AIR TEMPERATURE SENSOR (IAT) RELOCATION KIT
    Got heat soak? The problem is that BMW integrated the S68's intake air temp sensor in the MAF housing, which is sandwiched behind a hot radiator and in some applications next to an even hotter valve cover. The MAF housing absorbs the excess heat from its surroundings and can’t shed it fast enough, and the ECU reads a falsely high intake air temperature.  It then incorrectly adjusts operating parameters to compensate for the false hot air measurement (pulling timing and running a leaner fuel mixture), and torque output drops like a rock.

    The fix?  Locate an intake air temp sensor in a location where it can more accurately measure incoming air temps and where it is less prone to heat soak.  By mounting a sensor further away from the heat source and divorcing it from the mass of the MAF housing, it can both resist the effects of heat soak longer and respond to temperature changes more quickly.  The end result?  You’ll experience reduced loss in torque and more consistent power output when you’re pushing your engine hard. 

    Result? We recovered 11lb-ft torque at 2500rpm by relocating the temperature sensor on an E39 M5 (E60 owners should expect an even more substantial recovery)!

    Installation is as simple as drilling a small hole for the sensor and plugging in the harness.
     

    AFE INTAKE SYSTEM
    Rid your M5 or M6's V10 powerplant of both of its restrictive factory air boxes with this cold air intake kit by aFe, and you'll cut the airflow restriction IN HALF. Air flow showed an increase of 117% and dyno testing yielded max power gains of  28hp  and  24 ft/lbs of torque . The intake tubes of this kit are custom-designed to accelerate airflow for best performance. Fits all 2006, 2007, 2008 and 2009 and V10 M5 and M6. 

    Kit includes everything necessary to install, including installation instructions. This kit can typically be installed in less than 60 minutes, and uses all factory mounting points (no modifications). The kit uses 2 high performance 360 degree radial flow air filters which are washable/reusable (or oiled - your choice). The filtration media uses the deepest pleats in the industry, allowing the most surface area and airflow possible, in the space allowed. The increased airflow is significant enough that it is audible while driving, giving your 5.0 liter V10 a subtly more aggressive sound when revving or under load. Best of all, this is a SAFE product that will not cause any longevity issues or malfunctions to your BMW's intricate engine management system. 

    TURNER STAGE 1 PERFORMANCE SOFTWARE
    Adding power and torque to the M5 V10 is as easy as a flash! Where we can make our software better is by tuning it for higher octane gasoline. The stock software is tuned around the 87octane available in the US (most M5 owners would never use 87 but BMW engineers must account for that possibility). With our software, the performance of the S85 engine is optimized for the higher 91 or 93 octane. We tune many areas of the engine programming -

    • fuel and timing maps at part throttle and wide-open throttle,
    • revised torque settings and knock control,
    • improved VAN0S variable valve timing,
    • smoother and faster pedal response
    • top speed limiter eliminated
    • optional raised rev limit

    Our software uses a new version of stock BMW software as its base. Even the new stock software is an improvement over the original M5. If you have other modifications done to your M5/M6, we can supply you with specially-developed software to maximize the gains from those upgrades.

    Turner Motorsport has been developing software on the S85 since our first car in 2006. Since then we have done software projects for street, track, and 5.7L stroker engine builds using the stock MSS65 DME. Engine tunes have been developed and checked on our Dynapack chassis dyno and further refined with real world testing. For track cars, our Stage 2 cat-delete software will clear check engine lights and faults (to satisfy race series regulations).

    Our software is installed via the Turner flashing OBD tool. This tool plugs into the OBD socket in the dash and the performance software is installed from a laptop computer connected to the tool. It also works as a fault code scanner to read and reset diagnostic trouble codes and reset adaptations. The software program requires a Windows XP/Vista/7/8/10 laptop and the installation and setup are very easy. The OBD tool, cable, and files are shipped to you with simple setup instructions. There is no need to remove your ECU and ship it. You can have your M5 flashed in under an hour from the convenience of your garage or driveway!​

    Minimum Octane
    You can choose between 91 or 93. We have developed tuning for the standard 'high octane' premium fuel found around the country (91 is the maximum available in some areas). Our power and torque gains are advertised with 93. The 91 octane version will have less timing and slightly less horsepower gains.​

    Rev Limit
    We have two rev limit options: stock 8,250 and raised 8,500. Having a higher rev limit lets you stay in gear longer and avoid an untimely upshift. Higher rev limits should only be used for brief moments and never for sustained running. Additional engine maintenance, with frequent oil changes and oil analysis, is strongly recommended.​​

    Base File Update
    Our performance software is built around a specific version of stock software that BMW released as an update. It includes a number of significant changes over older versions for driveability and torque management. The M5 update was such a big step forward that it's considered an upgrade all on its own. No worry if you don't have it - we will provide you with a free update before the Turner performance software is installed

    Part #: E60M5PPST1
    Price: $1863.12 (USD) 
    $2097.9 (Sale - Save 11%)
    Free Shipping Free Shipping
    Liqui Moly Jectron Fuel Injection System Cleaner - 300 mL

    Fuel injectors tend to get built up with gunk over the years, eventually affecting the spray pattern and reducing engine efficiency. By using a fuel injector cleaner every 3-4 fill ups (or 1200 miles) like this Liqui-Moly Jectron, you can ensure that your fuel injection system is staying in top shape, giving you the best efficiency possible and preventing a number of potential issues such as poor emissions, lost performance, and rough idle.

    Features:

    • Cleans Injectors
    • Reduces Fuel Consumption and Exhaust Emissions
    • Keeps Intake Valves Clean (on vehicles without direct injection only)
    • Restores Performance, Drivability, and Durability
    • Promotes Proper Fuel Atomizing
    • Smooths Idle
    • Allows for Best Throttle Response
    • Allows for Faster Starts and Avoids Surging

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Part #: 2007
    Price: $6.26 (USD) 
    $6.95 (Sale - Save 10%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    LUX H8 180 Angel Eyes - E60/3 LCI, E70, E71, E84, E89, E90 LCI, E92 pre-LCI
    • Pure white 7000K white light
    • Equivalent to 180 watt halogen bulb
    • Over 2x brighter than stock bulbs
    • Guaranteed no dimming with all lighting modes
    • No flickering on startup Self Check Sequence
    • Fully Fused

    LUX H8 160 angel eyes produce an incredible 3600 lumen of pure white 7000k light, the halogen equivalent of 180 watts!  By comparison, the stock 35 watt halogen bulb receives only 80-90% power, and then drops to 50% power to reduce heat within the headlight housing when utilized with the headlights; thus causing stock the angel eyes to become even dimmer.  Our LUX H8 180 angel eyes have been designed to compensate for this dimming and always operate at full power, allowing them to be highly visible in virtually all the daytime conditions.  When locking the car, the the LUX will pulse off rather than fade. In addition, LUX LED bulbs use a fraction of the power of stocks, allowing them to run cooler and have a longer lifespan.

    Part #: LUXH180
    Price: $189.00 (USD) 
    $199.00 (Sale - Save 5%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    ECS Tuning Wheel Spacers - 25mm - 72.6mm CB

    Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

    ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

    ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

     

    This item fits the following BMWs:

    2008-2012 E82 BMW 128i 135 1M
    1988-1991 E30 BMW M3
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2012 E93 BMW 328i 335i M3 - Convertible
    1976-1981 E12 BMW 528i 530i
    1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
    1989-1995 E34 BMW 525i 530i 535i 540i M5
    2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
    1982-1989 E24 BMW 633csi 635csi M6
    2004-2010 E63 BMW 645ci 650i M6
    1981-1987 E23 BMW 733i 735i
    1988-1994 E32 BMW 735i 735il 740i 740il 750il
    1995-2001 E38 BMW 740i 740il 750il
    1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

    Rear Only
    2007-2013 E70 BMW X5M
    2007-2014 E71 BMW X6 xDrive35i X6 xDrive50i X6M

    Part #: 001058ecs04-25KT
    Price: $93.46 (USD) 
    $109.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    AFe Intake Kit - E60 M5, E63 M6 - Stage 2 ProDry S "Oil-Free" ProDry S Filter

    Rid your M5 or M6's V10 powerplant of both of its restrictive factory air boxes with this cold air intake kit by aFe, and you'll cut the airflow restriction IN HALF. Air flow showed an increase of 117% and dyno testing yielded max power gains of  28hp  and  24 ft/lbs of torque . The intake tubes of this kit are custom-designed to accelerate airflow for best performance. Fits all 2006, 2007, 2008 and 2009 and V10 M5 and M6.

    Kit includes everything necessary to install, including installation instructions. This kit can typically be installed in less than 60 minutes, and uses all factory mounting points (no modifications). The kit uses 2 high performance 360 degree radial flow air filters which are washable/reusable. The filtration media uses the deepest pleats in the industry, allowing the most surface area and airflow possible, in the space allowed. The increased airflow is significant enough that it is audible while driving, giving your 5.0 liter V10 a subtly more aggressive sound when revving or under load. Best of all, this is a SAFE product that will not cause any longevity issues or malfunctions to your BMW's intricate engine management system.

    This aFe Cold Air Intake Kit fits the following BMWs:
    2006,2007,2008,2009  E60 M5  Sedan
    2006,2007,2008,2009  E63 M6  Coupe
    2006,2007,2008,2009  E64 M6  Convertible

    Clickhere for installation instructions.
    Part #: 51-11272X
    Price: $737.06 (USD) 
    $818.95 (Sale - Save 10%)
    Free Shipping Free Shipping
    Schwaben Mechanics Stethoscope

    This tool is ideal for finding unusual vibrations or suspected leaks. 

    Features:

    • Aluminum alloy probe to determine noise location fast
    • Rubber trumpet to check for vacuum leaks and pressure flow noise
    • High quality surgical PCV hose for long life and increased sound definition
    Part #: 005965SCH01A
    Price: $14.96 (USD) 
    $19.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 6 Liter Fluid Extractor/Filler System

    6-Liter Extractor/Filler System makes oil, ATF or any type of fluid change a snap. Easily change to pump-in/out with the flip of a lever.

    Features: 

    • Extendable foot step for stable use when pumping
    •  All adapters mount on the tank for convenient storage of the 9 included adapters
    • 5-foot main tube features a quick disconnect and shut off valve
    • Included is a 24" long and 3/8" OD tube with quick connect nipple
    • Manual pump and requires no electricity or air pressure to operate
    • Extract up to 6-Liters of new fluid from barrel, bucket or bottle into the tank, turn handle to out position to fill into your vehicle

     

    Now Available:  Optional Dipstick extracting tube set 

    Part #: 007221SCH01A
    Price: $127.46 (USD) 
    $169.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 3-Liter European Pressure Brake Bleeder

    We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

     

    Features:

    • Holds a full 3-Liters ( 3.17 qts) of brake fluid
    • Easy to read 0-30 lbs pressure gauge built into the tank top
    • Pressure relief valve for safe release of pressure
    • 40" hose with detachable swivel fitting
    • Do not  exceed 20 PSI
    • One-year warranty
    Part #: 007237SCH01A
    Price: $37.46 (USD) 
    $49.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 12 Ft 6 Gauge Booster Cables Looking for a high quality set of jumper cable to keep around for emergencies? These are it, don't settle for cheap budget sets found at most places.
    Part #: 007269SCH01
    Price: $20.21 (USD) 
    $26.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Universal Adapter Kit For Brake Bleeding This adapter is for use with the 3-Liter Multi-Functional Fluid Pump Kit  and  3-Liter European Pressure Brake Bleeder  only and allow for fitment on other brake fluid reservoir fitment. 
    Part #: 007311SCH04A
    Price: $14.96 (USD) 
    $19.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    E60 M5, E63 M6 ECS 2-Piece Cross-Drilled/Slotted Front Brake Rotors - Pair (374x36)

    These 2-piece floating rotors help dissipate heat better than a standard cast iron rotor and are also lighter for less unsprung weight. Managing heat in the brake system is vital to braking performance, especially on the track or when driven hard. It's why your brake rotors have internal vanes that vent heat as the rotor spins. These 2-piece ECS rotors feature an outer cast iron friction surface ring that is separate from the aluminum center hat. This allows better airflow through the vanes and for the friction ring can expand as it gets hot. The rotors are also cross-drilled for better ventilation and slotted to improve brake pad performance.

    ECS 2-Piece Rotors feature:

    • Aluminum hats for light weight
    • Heat-treated cast iron friction rings
    • 2-piece assembly improves brake cooling
    • Anti-corrosion coating on non-friction surfaces and hard anodizing on rotor hat

    These are the same size as the stock rotors so your stock caliper and mounting bracket will fit and there will be no clearance issues with your wheels or to other components. Stainless steel rotor retaining screws are included. You can use these with any brake pad.

    Price is for the pair of brake rotors.

    This item fits the following BMWs:
    2006-2010 E60 BMW M5
    2006-2010 E63 E64 BMW M6

    Part #: 004383ecs01aKT
    Price: $809.96 (USD) 
    $899.95 (Sale - Save 10%)
    Free Shipping Free Shipping
    Quantity:   
    Schwaben Fluid Suction/Fill Pump

    This hand held Schwaben tool makes changing fluids an easy, quick task.The Schwaben fluid suction/fill pump suitable for oils, water and any non corrosive liquid.

    Features 

    • Comes with a flexible and a rigid tube. 
    • Flow rate is adjustable for different functions.
    • 350 ML capacity
    • Cylinder is marked in 20 mL increments and fraction of quarts for accurate filling. 

    Not for use with gasoline.

    Part #: 022253SCH01A
    Price: $27.71 (USD) 
    $36.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Honest Wash Spot & Oxidation Removal Kit

    Get rid of spots and oxidation with the Honest Wash Spot and Oxidation Removal Kit. It uses a polish to remove the stain and a wax spray to restore shine, keeping the mirror-like finish.

    Kit includes:

    • 32oz bottle of Precision Polish
    • 32oz bottle of Active Wax
    • 2 foam applicators
    • 3 microfiber towels
    Part #: HWKT-15
    Price: $40.49 (USD) 
    $44.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash Microfiber Towel (5 pack)

    The jack of all trades in the detailing world, the microfiber towel is the most used tool by far. Whether used for drying, buffing, polishing, applicating, or for just general cleeaning, you will be sure to go through a lot of these. Honest Wash can keep you stocked up with their premium lint-free microfiber towels.

    Product Details:

    • Perfect for cleaning, waxing, polishing, & more 
    • Soft material will not scratch or harm surfaces 
    • Lint-free polyester blend 
    • Size: 14"x14" 
    Part #: HW13-5
    Price: $5.39 (USD) 
    $5.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash Cross Dressing - Rubber, Plastic, & Vinyl - Cleaner & Conditioner 1 Gallon Take care of your interior and exterior plastic, rubber, and vinyl panels with Cross Dressing by Honest Wash, a multipurpose dressing that cleans, conditions, and gives your parts a glossy finish without leaving behind an oily residue. This helps prevent premature fading and aging on surfaces that have been neglected, making them look like new again.
    Part #: HW30-1G
    Price: $58.49 (USD) 
    $64.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash HyperMint Wash - Car Wash Soap 32oz Honest Wash's HyperMint was is a concentrated soap that give off a fresh peppermint scent while efficiently lifting away dirt, grease, and grime from your vehicles paint. Made from a combination of synthetic detergents and emulsifiers, it is tough on dirt without being tough on any exterior surfaces or trim. It's high foaming formula is environmentally safe and requires only small amount of soap per wash, using on 2-8oz of soap per gallon of water.
    Part #: HW01
    Price: $12.59 (USD) 
    $13.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash Bug Delete Bug, Tar, & Tree Sap Remover -- 1 Gallon Easily remove the build up of dead bugs, tar, film, and tree sap from the front of your car in minutes with Honest Wash's Bug Delete. Bug Delete is strong enough to wash away the layers of contaminants without damaging any of the exterior surfaces of your vehicle. Its ingredients are non-caustic, non-corrosive, and has no harsh alkalies.
    Part #: HW05-1G
    Price: $46.79 (USD) 
    $51.99 (Sale - Save 10%)
    Quantity:   
    Fat Foamer Foam Cannon Car Wash Soap 1 Gallon The perfect ammo for your foam cannon, sprayer, wand, or lance, Honest wash has made a specially designed soap to be used in spray-on applications that gives you a thick foam with suds that lift away dirt and grime. Tested safe with all paint and PlastiDip. Made in the USA.
    Part #: HW08-1G
    Price: $22.49 (USD) 
    $24.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash Advanced Car Washing Kit

    Looking for a thorough clean? Pick up the Advanced Car Washing Kit from Honest Wash to get their Foam Sprayer and everything you need to rid your car of dirt, grime, grease, and road debris.

    Kit includes:

    • Foam Sprayer- Sprays a thick cleaning foam onto your vehicle, no pressure washer required.
    • Fat Foamer- A high foaming car wash soap
    • Bug Delete- Easily remove bugs, tar, and tree sap.
    • Brake Dust Professional- A touch-free wheel cleaner, safe on all wheel finishes.
    • Glass Perfect- A streak-free, tint-safe glass cleaner.
    • Tire Love- Protect, shine, and restore your tires with this long-lasting formula.
    • 4x Microfiber Towels- Use for cleaning windows, interior panels, cleaning hard to reach areas, and more.
    • Foam Applicator- Use to apply wax, interior dressings, and more.
    • Tire Dressing Applicator- Easily apply Tire Love to your tires.
    • Microfiber Wash Mitt- Wash your car and remove dirt with this ultra-soft wash mitt.
    • Waffle Weave Drying Towel- A gigantic microfiber towel with a waffle pattern dries your car quickly.
    • 3.5 Gallon Bucket- Use to rinse your wash mitt to avoid scratching your paint
    Part #: HWKT-10
    Price: $116.99 (USD) 
    $129.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash Grease Lightning - Multipurpose Degreaser -- 2oz Sample Grease Lightning by Honest Wash is the best option to eliminate dirt, grease, and oil on your vehicle. Made from surfactants that are environmentally safe and bio-degradable, Grease lightning lifts and dissolves deposits of contaminants, letting you wife or rinse away stains on both exterior and interior parts of your vehicle. Best used area with heavy amount of dirt or oil such as cloth and carpet interiors, engines and engine bays, undercarriages, wheel wells, truck beds, door jams, and anywhere stubborn fingerprints won't wash off, such as your PlastiDip coating.
    Part #: HW06-S
    Price: $2.69 (USD) 
    $2.99 (Sale - Save 10%)
    Quantity:   
    Schwaben Telescoping Round Mirror

    Great for working in tight spacers when you can't get a good eye on the issue.

     

    Features:

     

    • Offers an 9-1/2" to 29" extendable handle with a stainless steel shaft
    • 2-1/4" mirror head mounted on a dual swivel for a full 360 degree rotation
    • Cushion grip rubber handle works great with dry or oily hands
    Part #: 010772SCH01a
    Price: $7.46 (USD) 
    $9.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 7mm Hose Clamp Flexible Driver

    Makes those hard to reach hose clamps much easier to loosen up.

    Features:

    • 7mm driver
    • 6"  flex shaft
    • Overall length of 10-1/2"
    • No-slip grip resistant to wet or oil coated hands

     

    Part #: 010658SCH01A
    Price: $8.21 (USD) 
    $10.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 3-piece Euro Style Locking Plier Set

    No more pinched fingers or dropping as they unlock. This style locking lever is all one hand operation. Can be unlocked with lower finger while still gripping plier. Others require a two hand operation.

    Features:

    • 7" Straight Jaw Locking Pliers
    • 7" Curved Jaw Locking Pliers
    • 6" Needle Nose Locking Pliers
    Part #: 008917SCH01A
    Price: $23.96 (USD) 
    $31.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 4 Pc Plier Set

    Having a nice set a pliers can make a big difference on the ease of getting the job done. Schwaben pliers are designed around comfort and keeping them clean.

    Features:

    • 7" Diagonal cutter pliers
    • 8" extra long needle nose pliers with cutter and round jaw grip.
    • 8" Slip joint pliers has two settings
    • 10" Groove joint pliers with 4 settings
    Part #: 008927SCH01A
    Price: $35.21 (USD) 
    $46.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Extended 19mm Wheel Stud Socket Adapter

    Installed extended wheel studs and would love to be able to change wheel spacers as needed? But wait, if you have a flat tire or want to change it up at the track. But now your lug wrench is not deep enough to reach the nuts.

    Features:

    • This specially made socket features 19mm male hex on one end and 19mm socket on the other
    • Works to extend reach between wrench and lug nut
    • Keep inside your glove box so it is ready for any tire change on the road or on the track

    NOTE: Not for use with impact.

    Part #: 004351SCH02A
    Price: $11.21 (USD) 
    $14.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Magnetic Protecta Wheel Socket Set

    Schwaben Protecta Sockets have color coded mar-free exterior sleeve  that prevent nicks and scratches left by plain metal sockets. Internal spring loaded magnet holds lug nut in place.

    Features:

    • 17mm, 19mm and 21mm Sockets included in a blow molded case.
    • All sockets are 1/2" drive
    • 3-3/8" ( 86mm) long

    Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

     

    Part #: 016135SCH01A
    Price: $44.96 (USD) 
    $59.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Wheel Bolt for BMW, MINI - 12x1.50 - Black Chrome - fits most BMWs (see list) These 'show quality' black chrome wheel bolts have a satin/luster finish to them that looks better than most other finished bolts, including the factory bolts. The bolt head is also finished off better with a rounded head instead of recessed. If your wheels are perfect, your bolts should be too! These are high grade (10.9) 12x1.50 bolts, in the same size as the stock bolt or to be used with a small 5-8mm spacer.

    Price is per bolt (each). You can enter your quantity after pressing the Update Price button below or from the shopping cart.






    + Emblem Application Specifics
    (click here to check your car)
    These black satin wheel bolts fit the following BMWs:
    2008-2012 E82 BMW 128i 135i 1M Coupe
    1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2013 E93 BMW 328i 335i M3 - Convertible
    1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
    1989-1995 E34 BMW 525i 530i 535i 540i M5
    1997-2003 E39 BMW 525i 528i 530i 540i M5
    2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
    1982-1989 E24 BMW 633csi 635csi M6
    2004-2011 E63 BMW 645ci 650i M6
    1988-1994 E32 BMW 735i 735il 740i 740il 750il
    1995-2001 E38 BMW 740i 740il 750il
    1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    2000-2003 E52 BMW Z8 Roadster
    2002-6/2006 R50 MINI MINI Cooper
    2005-6/2006 R52 MINI MINI Cooper Convertible, MINI Cooper S Convertible.
    2002-6/2006 R53 MINI MINI Cooper S
    Part #: TMS16545
    Price: $5.31 (USD) 
    $6.25 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Turner Motorsport Blipshift Z4 Racecar T-Shirt - Black Your 328i may not yet be a full blown GT racecar, but adding that short shift kit gets you one step closer. Monday morning's 5 minute long red light is a chance to daydream of the 180mph high banks of Daytona! Every mod is a life enhancement with daily rewards.

    Introducing the winner of the Racing Bimmers Tee Design Contest by Blipshift honoring Turner Motorsport's continued success with BMW racecars! From e30s to last season's monster Z4, Turner has stayed true to BMWs since 1993, amassing 7 championships.

    Congrats to Anthony, winner of the Pit Crew Experience with the Turner team this season at Mazda Raceway Laguna Seca!

    Only available at TurnerMotorsport.com. Choose from Fitted T-shirt or Beefy T
    Part #: BS-Z4-FITTED
    Price: $12.00 (USD) 
    $19.95 (Sale - Save 40%)
    Free Shipping Free Shipping
    on orders $199 and up
    Turner Stage 2 Race Software for the E60 M5, E63/E64 M6

    RACE SOFTWARE TO BE USED WITH HEADERS

    Max HP gain = 18* hp @8200rpm
    Max Trq gain = 15* ft-lbs @6900rpm
    Rev Limit = 8400 RPM

    This special Race software is designed to work with sport headers that eliminate the primary catalytic converters. On our own M5 project vehicles, this combination netted 30hp and 50ft-lbs of torque - a massive transformation to an already mighty car. Our special software will keep fault codes and check engine lights away by ignoring the readings from the second set of oxygen sensors. Without a reading, the computer doesn't realize the cats have been removed. We also tune many other areas of the engine programming - fuel and timing maps at part throttle and wide-open throttle, VAN0S variable valve timing, rough idle at cold start, and more. The throttle response is also improved (quicker) eliminating unwanted and dangerous flat spots in the pedal response.
    * = software alone, +30hp/+50ft-lbs when used with headers and removing primary catalytic converters. See dyno chart.

    Our software is installed via the Turner flashing OBD tool. This tool plugs into the OBD socket in the dash and the performance software is installed from a laptop computer connected to the tool. It also works as a fault code scanner to read and reset diagnostic trouble codes and reset adaptations. The software program requires a Windows XP/Vista/7/8/10 laptop and the installation and setup are very easy (click here for instructions). The OBD tool, cable, and files are shipped to you with simple setup instructions. There is no need to remove your ECU and ship it. You can have your M5 flashed in under an hour from the convenience of your garage or driveway!

    This software alters the federally-mandated emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. TMS does not guarantee or promote that this software will pass a federal or state or local emissions test. You can download the waiver here.



    This item fits the following BMWs:
    2006-2010 E60 M5 sedan
    2006-2010 E63 M6 coupe, E64 M6 cabrio

    Part #: TNS85-ST2
    Price: $899.10 (USD) 
    $999 (Sale - Save 10%)
    Free Shipping Free Shipping
    E63 M6 Supersprint Performance Mufflers (Left & Right Set)

    Free ground shipping! 

    These Supersprint performance mufflers enhance the athletic side of the M6's personality. With a freer-flowing design there is more of that exhaust pop and rumble coming to the cabin, reminding you that this is a BMW Motorsport vehicle and not a luxury cruiser. The sport mufflers are more subdued than the race version with a great sound and no dramatic side effects. You hear the exhaust when you want to but it's composed and smooth when you don't want to advertise. A moderate increase in torque and horsepower from less restriction is a nice bonus. These mufflers are clamped in place of the stock mufflers, making for a straight forward and simple install. If you desire later on to hear more of the exhaust, an x-pipe can also be installed to eliminate the rear resonator.

    Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

     

    section:rear mufflers

    connects to:stock center section or Supersprint x-pipe

    tip style:90mm quad round

    material:T304 stainless steel


    This item fits the following BMWs:
    2006-2011 E63 BMW M6

    Part #: 988846-988826
    Price: $1364.93 (USD) 
    $1819.9 (Sale - Save 25%)
    Free Shipping Free Shipping
    Schwaben 8oz Ball Peen Hammer The 8oz Ball Peen hammers are constructed with a fiberglass handles with a molded rubber grip. The heads are made from drop forged steel to avoid damage and to stand up to long years of impacts. Each side is precision ground for accurate striking points.
    Part #: 016805SCH02A
    Price: $7.46 (USD) 
    $9.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 3pc Professional Hammer Set

    Every now and then you just need a hammer to get the job done. Ensure that your hammers are high enough quality to stand up to the demands of the job!

    Included in this set:

    • 8-oz Ball Peen Hammer 
    • 16-oz Ball Peen Hammer 
    • 36-oz Dead Blow Hammer

    The 8 and 16 oz Ball Peen hammers are constructed with a fiberglass handles with a molded rubber grip. The heads are made from drop forged steel to avoid damage and to stand up to long years of impacts. Each side is precision ground for accurate striking points.

    The 36 oz dead blow hammer is built with steel shot internals that delivers a stronger force of impact and prevents rebound. The hammer itself is all built from a high-impact poly jacket that encases the head and handle. This hammer allows you to hammer softer metals, such as aluminum, without damaging the surface or the part itself. The handle has a diamond-shaped grip pattern to prevent your hands from slipping and sliding, even with your hands are covered with oil.

    Part #: 016805sch01aKT
    Price: $22.46 (USD) 
    $29.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Turner BMW 15mm Wheel Spacers (Pair) - Most BMWs (see applications)

    15MM (.59 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4

    Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems --

    • Correct wheel offset issues
    • Achieve a flush fitment instead of the "tucked under" look
    • Clearance the wheel from contact with other components (suspension, brakes, etc).
    • Improve handling and stability by increasing track width

    A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required.

    These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is light weight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market!

    Turner Wheel Spacer Features --
    + hub-centric design, 1-piece spacer
    + precise tolerance fitment thanks to CAD process and CNC mill machine
    + aerospace grade aluminum  light weight but very strong with a high resistance to corrosion
    + additional military-spec hardcoat for further corrosion resistance
    + innovative Quick Release pockets for easy removal (better than a chamfered back edge)
    + laser engraved size and part number for easy identification
    + stealthy anthracite or black color
    + extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available)
    + Turner Motorsport track and street tested!
    + Made in the USA

    Extended Wheel Bolts
    Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing.

    Spacer Specs:
    (click to expand)
    Spacer Specs:
    bolt pattern:5 x 120
    center bore:72.6mm
    hubcentric?yes
    wheel pad size:normal

    Year & Model Applications
    (click to expand)
    2008-2012 E82 BMW 128i 135 1M
    1988-1991 E30 BMW M3
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2012 E93 BMW 328i 335i M3 - Convertible
    1976-1981 E12 BMW 528i 530i
    1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
    1989-1995 E34 BMW 525i 530i 535i 540i M5
    2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
    1982-1989 E24 BMW 633csi 635csi M6
    2004-2010 E63 BMW 645ci 650i M6
    1981-1987 E23 BMW 733i 735i
    1988-1994 E32 BMW 735i 735il 740i 740il 750il
    1995-2001 E38 BMW 740i 740il 750il
    1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
    Part #: TWH9905015
    Price: $76.46 (USD) 
    $89.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    StopTech Front & Rear Big Brake Kits - E60, E63 Position: Matching Front and Rear
    Front Calipers: 6-piston ST60
    Rear Calipers: 4-piston ST40
    Colors: black, red, silver, blue, yellow, custom (call)
    Front Rotors: 380x32mm, cross-drilled or slotted
    Rear Rotors: 355x32mm, cross-drilled or slotted
    Also Included: stainless steel brake lines, StopTech Street Performance pads, hardware

    Race Technology Used By Turner Motorsport StopTech Brakes puts championship-winning race technology and state-of-the-art engineering under your feet. StopTech's Front and Rear Big Brake Kit for the E60 535i/545i/550i and E63 645Ci/650i is a chassis-specific brake upgrade engineered to work with the stock brake hydraulics and ABS/DSC system. StopTech builds each kit around the specific vehicle, engineering the system to achieve the correct brake balance. This brake upgrade gives better stopping performance in everyday driving, aggressive street driving, or all-out track days. By increasing the rotor size, using a larger pad, and a fixed forged aluminum caliper, you can improve your braking performance substantially for any condition! StopTech Brakes have been used on Turner Motorsport racecars since 2003, winning 5 sports car championships and recording numerous race wins since.

    Safety Improvements from A Big Brake Kit:
    + Caliper design improves brake application and increases torque - braking is stronger meaning shorter stopping distances and faster response
    + Vehicle-specific design - improves brake feel with a firmer pedal
    + Larger and thicker rotors - less fade and longer pad and rotor life

    Advantages of a StopTech Big Brake Kit:
    + extremely strong caliper and mounting system - reduces flex and deflection, improving torque application to the disc
    + Several color options available
    + Vehicle-specific calipers that maintain correct brake proportioning and balance
    + AeroRotor patented vaning for superior air flow
    + Cross-Drilled for street use or Gas-Slotted for street or track use
    + Billet aluminum mounting hats for superior strength over steel
    + DOT-compliant stainless steel brake lines
    + Street Performance brake pads that work on both street and light track use

    Maximizing brake efficiency by braking with all four wheels... Sounds obvious right? Many bolt-on caliper upgrades and other big brake kits are not built with the specific vehicle's dynamics in mind. With too much braking force on the front, rear traction is compromised. And vice-versa. Brake traction is better when all four tires are doing the work. Most BMWs have 50-50 weight distribution so the correct braking proportioning is crucial! StopTech engineers each kit around that vehicle's dynamics by altering the size and number of pistons in the caliper to match the rotor size used in the kit. Bigger is not always better...

    Brake FAQs
    Brake Pad Buying Guide
    Brake Rotor Buying Guide

    Wheel Fitment Guides: Wheel spoke-to-brake caliper clearance is critical since the new caliper is physically larger and the in a different position. StopTech has produced these cutaway diagrams for you to print and place on the backside of your wheel to check for clearance. Wheels that do not clear will need a wheel spacer. The minimum recommended clearance between the wheel and caliper is 3mm.
    E60 545i, 550i - front 6-piston/380mm rotor
    E60 545i, 550i - rear 4-piston/355mm rotor
    E63 645ci, 650i - front 6-piston/380mm rotor
    E63 645ci, 650i - rear 4-piston/355mm rotor

    StopTech E60, E63 Brake Kit Applications:
    2007-2010 E60, E61 535i
    2004-2010 E60, E61 545i, 550i
    2005-2010 E63, E64 645Ci, 650i

    We will meet or beat any advertised price for StopTech Big Brake Kits! Call or e-mail us with the published pricing that you found and we will do our best to not only match that price but actually beat it!

    Part #: 83.150.6847
    Price: $4561.81 (USD) 
    $5068.68 (Sale - Save 10%)
    Free Shipping Free Shipping
    StopTech Caliper Piston Rebuild Kits

    Stoptech Big Brake calipers are designed to be serviced and rebuilt just like any factory caliper. The pistons will probably last the life of the car but the seals can become brittle from extreme heat or extreme cold. Sometimes they just get damaged from debris. For racing environments it's best to rebuild the calipers often (maybe even several times a year). At least you should always have spare caliper seals on hand.

    These are the genuine Stoptech caliper seals (dust boots and pressure seals). We sell these to service a PAIR of pistons (1 boot and 1 seal per piston). You will need to measure your existing pistons or seals to order the correct rebuild kits. Sorry, there are too many variables to tell you which pistons you have with only your car info. It's easy to measure and you don't have to remove the pistons from the calipers. Stoptech pistons are metric sized and in 2mm increments. Use the chart below to match your measurments to a rebuild kit.
     

    There are a few ways to determine which caliper seals you need. You can measure from the overall outside diameter of the dust boot (A); the inside diameter of the piston (B); or the outside diameter of the piston body (not the tip protruding from the seal!) (C). If measuring the piston body the whole piston has to come out of the caliper housing. Just measuring the tip will give a false measurement. Remember to measure each of your pistons as piston sizes can vary even within the same caliper. Click the image at left for a larger version.

     

    Use the table below to determine which Stoptech rebuild kit you need:

    Outer Boot
    Diameter, "A"Piston Inner
    Diameter, "B"Piston Outer
    Diameter, "C"Stoptech Kit #

    3611.7026143.99026K

    3813.4528143.99028K

    4015.2030143.99030K

    4216.9532143.99032K

    4418.7034143.99034K

    4620.4536143.99036K

    4822.2038143.99038K

    5023.9540143.99040K

    5225.7042143.99042K

    5427.4544143.99044K

    5629.3046143.99046K


    We sell rebuild kits for a PAIR of pistons - 1 seal and 1 boot per piston. For example -
    For a 4-piston caliper you only need to order 2 rebuild kits.
    For a 6-piston caliper you only need to order 3 rebuild kits.
    But make sure you measure each piston!

    These rebuild kits fit with StopTech caliper pistons only. Sorry, returns are not accepted for opened piston seal kits.

    Part #: TMS213589DK
    Price: $20.25 (USD) 
    $22.5 (Sale - Save 10%)
    E60 M5, E63 M6 Rod Bearing Overhaul Kit

    Rod bearings should be replaced as a preventative measure before 80,000 miles. This package is the most complete rod bearing overhaul kit available and includes not just the latest BMW rod bearings and connecting rod bolts, but also everything else that should be replaced with the oil pan and front subframe off the car.

    Rod bearings continue to be a sore subject among M3, M5, and M6 owners. The rod bearings in the S85 V10 have been known to fail within 60,000 miles. There could be a number of reasons for premature failure with a lot of finger-pointing as to the real cause. Whatever the reason, rod bearings are wearing out sooner than expected and their replacement should be considered a required preventative maintenance item. We suggest a replacement interval of between 60,000-80,000 miles with frequent engine oil analysis done along the way*. Driving moderately and allowing the engine to warm up before hard use will also extend rod bearing life.

    After doing so many rod bearing replacements in our own service shop we have put together this comprehensive overhaul package. Our package includes -

    Genuine BMW rod bearings
    - 11247841703, upper bearings - latest design from BMW (either original or WPC treated**)
    - 11247841702, upper bearings - latest design from BMW (either original or WPC treated**)
    - 11247834522, connecting rod bolts
    - Red Line engine assembly lube

    Oil Pan
    - 11137836361, oil pan gasket
    - 07119905485, oil pan screws (required by BMW)
    - 07129905600, oil pan screws (required by BMW)
    - 11137836568, oil pan screws
    - 07119963129, seal washers
    - 11417836233, auxiliary oil pump gaskets
    - 11121304174, oil pickup tube o-ring

    Replacing the rod bearings requires mechanical knowledge and skill, a clean workspace, and several specialist tools. Our preferred procedure is to leave the engine in the car but remove the front subframe. The engine must be supported from above with an engine brace. Removing the front subframe involves disconnecting the control arms and steering rack and steering column. The oil pan can then be removed and you can access the connecting rods and bearings. Replacing the rod bearings themselves is straightforward but patience and forethought will be extremely helpful. In addition to analyzing the severity of the rod bearing wear, the crankshaft must also be inspected closely for damage. Rod bearings that have been severely worn may have damaged the crankshaft (requiring replacement or machining).

    * BMW released an updated rod bearing around 2011 that uses different materials than the original design. The old rod bearings were constructed with several layers or metal, including copper and lead. If an engine oil analysis revealed high levels of these specific metals then it was a sure sign that the rod bearings were nearing replacement. However, the new BMW bearings do not use copper or lead so an oil analysis will not alert you to heavy bearing wear. The new bearings are also a harder material which prolonged the life of the bearing but increased the liklihood of crankshaft damage if a bearing failed. Even though the bearing theoretically lasts longer it's even more important to preventativly replace them before they damage the crankshaft.

    ** These WPC-treated bearings are the best we have seen for the S85. WPC is a shot-peening treatment at a microscopic level. It's perfect for sensitive surfaces like bearings. The WPC treatment removes imperfections and high spots, while creating a surface that retains oil better than the original surface. This greatly reduces friction. The bearings in this kit are factory BMW bearings that are sent to WPC for treatment. The treated bearings are stronger with less metal fatigue and less friction than buying off-the-shelf bearings from the dealer.

    Internal VANOS Pressure Line
    One of the VANOS oil lines runs along the inside of the timing chain cover and into the oil pan. It can only be replaced with the oil pan removed. If you have sluggish performance or VANOS fault codes this is one of the common causes and now is the perfect time to replace it. If it fails down the line the oil pan will have to be removed again.

    Front Subframe Hardware
    Our preferred procedure for accessing the engine block is by disconnecting the control arms and steering rack and then removing the front subframe altogether. This hardware is not required but may be a good idea, especially if your original subframe bolts are rusty. Hardware includes:
    31106760222, front subframe mounting bolts
    31106770256, front subframe mounting bolts
    33326760668, front wishbone collar nut

    Tie Rod Boots
    32106765782, tie rod boot kit

    Motor Mounts with Hardware
    22116762607, left motor mount
    22116762608, right motor mount
    07129904088, motor mount bolts
    07129904865, motor mount nuts

    Engine Oil Change
    83212365944, BMW 10W-60 engine oil
    11427840594, OEM oil filter.

    This package fits the following BMWs:
    2006-2010 E60 BMW M5
    2006-2011 E63 BMW M6

    Part #: TMS222798
    Price: $781.77 (USD) 
    $868.63 (Sale - Save 10%)
    Free Shipping Free Shipping
    E60 M5/E63 M6 WPC Treated S85 Rod Bearings (Set)

    These WPC-treated bearings are the best we have seen for the S85. WPC is a shot-peening treatment at a microscopic level. It's perfect for sensitive surfaces like bearings. The WPC treatment removes imperfections and high spots, while creating a surface that retains oil better than the original surface. This greatly reduces friction. The bearings in this kit are factory BMW bearings that are sent to WPC for treatment. The treated bearings are stronger with less metal fatigue and less friction than buying off-the-shelf bearings from the dealer.

    Price is for a complete set of S85 upgraded rod bearings.

    Part #: 11247841702WPCKT
    Price: $620.96 (USD) 
    $689.95 (Sale - Save 10%)
    Free Shipping Free Shipping
    Quantity:   
    Dinan Manual Transmission Alumnium Pedal Cover Set Stylish aluminum and rubber pedal pads add a great high performance look to the interior of your BMW, while providing plenty of grip for even slippery leather soles. The pedal pads feature the Dinan logo and come complete with hardware for a simple installation. Worth 1 point towards your Dinan badge.
    Part #: D700-0000
    Price: $212.40 (USD) 
    $236.00 (Sale - Save 10%)
    Free Shipping Free Shipping
    Quantity:   
    E60/E63 Dinan Monoball Front Thrust Arm Bushings (Pair)

    For someone looking for superior performance and longevity these sealed monoball bushings are the best upper thrust bearing you can buy for an E60 5-series or E63 6-series. The advantage of a monoball bearing is that it will not deflect under load. All of the rubber bushings move in all sorts of directions and that changes your alignment, especially when used with big brake kits or when driven hard. The condition worsens as the bushing wears out. The Dinan monoball sits in a CNC machined aluminum housing which has zero deflection. The monoball allows complete freedom of movement but only at the desired angles. What you get is superior steering precision, better handling from more consistent alignment, and almost infinite bushing life. And thanks to the inner liner and sealed rubber boots there's none of the extra noise or reduced service life of fully solid race bushings. 

    We strongly advise using these with new control arms. BMW recommends that the bushings be replaced only once per set of control arms. So if your thrust arm bushings have been replaced already then we do not recommend re-using the arms. The other reason is that the aluminum arms stretch over time which will make the bushings loose inside the arm. Other manufacturers recommend filling the stretched arms with paste but replacing the control arm is the better solution.

    For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere.

    This item fits the following BMWs:
    2004-2010 E60 BMW 525i 528i 530i 535i 545i 550i M5
    2004-2010 E63 E64 BMW 645ci 650i M6

    Part #: D280-0009
    Price: $462.60 (USD) 
    $514.00 (Sale - Save 10%)
    Free Shipping Free Shipping
    Quantity:   
    12x1.5 Extended Wheel Locks For Wheel Spacers These wheel locks are made in extended lengths to work with wheel spacers. This is the standard conical seat bolt in a 12x1.5 thread pitch (most BMWs up to 2012). This is a set of 4 bolts - one bolt per wheel that replaces one of your existing extended wheel bolts. The 9 point socket provides an extra layer of protection for your coveted wheels. Black zinc coating resists rust and corrosion. Choose the wheel locks to work with your wheel spacers from the list below.
    Part #: 003901ECSBM
    Price: $29.71 (USD) 
    $34.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Turner Spherical Monoball Thrust Arm Bearing Set - E60, E61, E63, E64

    BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience.  Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. 

    For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).  We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, and E83 owners similar levels of handling precision and control for the track and street. 

    The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting.  The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

    In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

    We offer these thrust arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms.

    Features:

    Bearing housing

    • Precision CNC machined from 6061-T6 blue anodized aluminum
    • Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands.
    • CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. 

    Bearing

    • OEM BMW sealed and greased ball joint for exceptional durability and service life.

    Performance

    • Nearly instantaneous, crisp steering and braking response.
    • Maintenance free, long lasting performance. 
    • Improved road feel without undesirable NVH.

    This item is an upgrade to the following rear-wheel drive BMWs: 

    2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i M5
    2004-2011 E63/E64 BMW 645ci 650i M6

     

    Part #: 022014TMS01
    Price: $212.46 (USD) 
    $249.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    Quantity:   
    Part #: 20232
    Price: $32.36 (USD) 
    $35.95 (Sale - Save 10%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Honest Wash Cross Dressing - Rubber, Plastic, & Vinyl - Cleaner & Conditioner 32oz Take care of your interior and exterior plastic, rubber, and vinyl panels with Cross Dressing by Honest Wash, a multipurpose dressing that cleans, conditions, and gives your parts a glossy finish without leaving behind an oily residue. This helps prevent premature fading and aging on surfaces that have been neglected, making them look like new again.
    Part #: HW30
    Price: $16.19 (USD) 
    $17.99 (Sale - Save 10%)
    Quantity:   
    Grease Lightning - Multipurpose Degreaser -- 32oz Grease Lightning by Honest Wash is the best option to eliminate dirt, grease, and oil on your vehicle. Made from surfactants that are environmentally safe and bio-degradable, Grease lightning lifts and dissolves deposits of contaminants, letting you wife or rinse away stains on both exterior and interior parts of your vehicle. Best used area with heavy amount of dirt or oil such as cloth and carpet interiors, engines and engine bays, undercarriages, wheel wells, truck beds, door jams, and anywhere stubborn fingerprints won't wash off, such as your PlastiDip coating.
    Part #: HW06
    Price: $11.69 (USD) 
    $12.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash Clean & Shine Wheel & Tire Kit

    Keep your wheels/tires looking great with this kit from Honest Wash.

    Kit includes:

    • 32oz bottle of Brake Dust Professional wheel cleaner BDP
    • 32oz bottle of Tire Love tire shine
    • tire shine applicator
    Part #: HWKT-1
    Price: $33.29 (USD) 
    $36.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash Microfiber Wash Mitt The Microfiber Wash Mitt "The Scrubber" works perfectly to wash your entire vehicle, then focus on areas such as the front bumper and hood which are encrusted with bugs and tar. The reverse side of the mitt has a scrubbing mesh that is tough enough to scrub away bugs but soft enough to keep from scratching your paint. It is also lint free because of it polyester construction. With a bit of help from something like Bug Delete spray, you'll have your vehicle contaminant free in no time.
    Part #: HW15
    Price: $5.84 (USD) 
    $6.49 (Sale - Save 10%)
    Quantity:   
    Honest Wash Sample Package

    Honest Wash offer's a line of samples for you to try, and we know you wont be disappointed!

    Samples include:

    • Active Wax 2oz- High quality spray wax.
    • Brake Dust Professional Wheel Cleaner 2oz- Touch-free wheel cleaner
    • Bug Delete 2oz- Bug, tar, and tree sap remover.
    • Car Show Prep 2oz- Quick detail spray.
    • Cross Dressing 2oz- Multipurpose dressing for dashboards, rubber, vinyl, & more.
    • Glass Perfect 2oz- Streak-free, tint safe glass cleaner.
    • Grease Lightning 2oz- Multipurpose degreaser.
    • Tire Love 2oz- Long lasting tire shine.
    • Fat Foamer 8oz- High foaming car wash soap designed for foam cannons or sprayers.
    • HyperMint Wash 8oz- Invigorating car wash soap featuring a blend of mint aromas.
    • Mud Cutter 8oz- Powerful car wash soap designed to remove dirt, clay, and mud buildups
    Part #: HWKT-19
    Price: $26.99 (USD) 
    $29.99 (Sale - Save 10%)
    Quantity:   
    Honest Wash Foam Cannon

    If you are looking for the perfect pressure washer, Honest Wash has the answer. The Foam cannon is exactly what you need to blast off dirt and get your car spotless once again. Just fill the container with soap such as Fat Foamer car wash and shower your car in a bath of high pressure suds to eliminate dirt, grease, and grime with ease.

    Includes a pressure washer adapter and can be used with any pressure wash with a flow rate of 1.5 to 5.3 GPM

    Part #: HW12
    Price: $40.49 (USD) 
    $44.99 (Sale - Save 10%)
    Quantity:   
    APEX SM-10 18x9.5 The new SM-10 APEX design uses both Flow Forming construction, making the wheel from one solid piece, and a new "I" beam machining technique. This wheel a is break from the traditional mesh styles available from APEX. This new "I" beam machining process mills out a slight amount of material in the spokes to both reduce weight and add visual appeal with a feature normally only found on some of the most expensive race wheels.

    APEX light alloy wheels are the next evolution in flow-forged wheel technology for BMWs. Flow-forming is a semi-forging process that produces a wheel typically stronger than a traditional cast wheel yet is still light weight. The wheels are around 10lbs lighter per wheel than a comparable factory wheel! That's reduced unsprung weight that improves all aspects of performance. The spokes and barrel have been designed to allow generous clearance for big brakes. In other words, these wheels are very impressively engineered and look great too! The design is based on classic motorsport themes that blend with BMW styling and appearance. These wheels look right at home on many BMW models. Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack. Don't let the price fool you - these wheels are high quality, high strength, and in high demand.

    Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required.
    Part #: SM10APEX95
    Price: $1472.40 (USD) 
    $1636 (Sale - Save 10%)
    Turner Motorsport Ladies' Tank Top Show your support for Turner Motorsport and your favorite BMW race team and parts supplier with these stylish blue cotton Turner Motorsport tank tops. The tanks feature a yellow logo. Available in three sizes.
    Part #: TMSTANK
    Price: $16.96 (USD) 
    $19.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    AC Schnitzer Performance Front Spoiler - E63 E64

    Schnitzer got it's start racing BMW's in 1967 and has since gone onto win many championships in DTM, WTCC and other touring car series. In 1987 AC Schnitzer started manufacturing custom high performance products for BMW's using their knowledge from years of racing and winning with BMW's. AC Schnitzer offers the highest quality components for your BMW.

    This item fits the following BMWs:
    2004-2010 E63 BMW 645Ci 650i

    2004-2010 E64 BMW 645Ci 650i

    **Not for vehicles with M-teknic**

     

    Part #: 511163410
    Price: $552.00 (USD) 
    $690.00 (Sale - Save 20%)
    Quantity:   
    AC Schnitzer Performance Springs - E63

    AC Schnitzer Performance Springs are matched to your BMW's chassis and suspension components to deliver better handling and looks without sacrificing ride quality. Schnitzer's springs are engineered with precision to coexist with your car's suspension to improve suspension geometry. Spring rates are slightly stiffer than stock and fine tuned to reduce body roll, without sacrificing driving comfort.  A stiffer suspension makes the car more fun to drive, while the lower ride height improves the looks by reducing wheel gap. 

    This item fits the following BMWs: 
    2004-2010 E63 BMW 645Ci 650i

    Part #: 313064910
    Price: $464.00 (USD) 
    $580.00 (Sale - Save 20%)
    Quantity:   
    StopTech Rear 4-Piston Big Brake Kit - E60 M5

    Position: Rear
    Caliper: 4-Piston ST41
    Colors: Natural Anodized
    Rotors: 380x32mm, cross-drilled or slotted
    Also Included: stainless steel brake lines, StopTech Street Performance pads, hardware

    StopTech Brakes puts championship-winning race technology and state-of-the-art engineering under your feet. StopTech's Front Big Brake Kit for the E60 M5 is a model-specific brake upgrade engineered to work with the stock brake hydraulics and ABS/DSC system. StopTech builds each kit around the specific vehicle, engineering the system to achieve the correct brake balance. This brake upgrade gives better stopping performance in everyday driving, aggressive street driving, or all-out track days. By increasing the rotor size, using a larger pad, and a fixed forged aluminum caliper, you can improve your braking performance substantially for any condition! StopTech Brakes have been used on Turner Motorsport racecars since 2003, winning 5 sports car championships and recording numerous race wins since.


    Safety Improvements from A Big Brake Kit:
    + Caliper design improves brake application and increases torque - braking is stronger meaning shorter stopping distances and faster response
    + Vehicle-specific design - improves brake feel with a firmer pedal
    + Larger and thicker rotors - less fade and longer pad and rotor life

    Advantages of a StopTech Big Brake Kit:
    + extremely strong caliper and mounting system - reduces flex and deflection, improving torque application to the disc
    + Several color options available
    + Vehicle-specific calipers that maintain correct brake proportioning and balance
    + AeroRotor patented vaning for superior air flow
    + Cross-Drilled for street use or Gas-Slotted for street or track use
    + Billet aluminum mounting hats for superior strength over steel
    + DOT-compliant stainless steel brake lines
    + Street Performance brake pads that work on both street and light track use

    Maximizing brake efficiency by braking with all four wheels... Sounds obvious right? Many bolt-on caliper upgrades and other big brake kits are not built with the specific vehicle's dynamics in mind. With too much braking force on the front, rear traction is compromised. And vice-versa. Brake traction is better when all four tires are doing the work. Most BMWs have 50-50 weight distribution so the correct braking proportioning is crucial! StopTech engineers each kit around that vehicle's dynamics by altering the size and number of pistons in the caliper to match the rotor size used in the kit. Bigger is not always better...

     

    Brake FAQs

    Brake Pad Buying Guide

    Brake Rotor Buying Guide


    Wheel Fitment Guides: Wheel spoke-to-brake caliper clearance is critical since the new caliper is physically larger and the in a different position. StopTech has produced these cutaway diagrams for you to print and place on the backside of your wheel to check for clearance. Wheels that do not clear will need a wheel spacer. The minimum recommended clearance between the wheel and caliper is 3mm.



    StopTech E60 M5 Brake Kit Applications:
    2006-2010 E60 M5 

     

    We will meet or beat any advertised price for StopTech Big Brake Kits! Call or e-mail us with the published pricing that you found and we will do our best to not only match that price but actually beat it!

    Part #: E60M5STBBK3
    Price: $2175.47 (USD) 
    $2417.19 (Sale - Save 10%)
    Free Shipping Free Shipping
    Turner Catch Can drain system

    When installing a catch can on your car, having enough space for maintenance can become an issue. This is why we developed a catch can with a bottom drain option, using this kit you can position the drain at the top or bottom of the vehicle for your convenience. Mounting the valve at the bottom of the car allows for you to empty the catch can easily during an oil change without having to move around too much. 

    Contains:

    • 1 - Plastic drain valve
    • 1 - 90 degree barbed fitting
    • 1 - Straight barbed fitting
    • 1 - 3' section of hose
    • 2 - Hose clamps
    Part #: 022798TMS16KT
    Price: $16.96 (USD) 
    $19.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Complete Turner Baffled Oil Catch Can Kit - Standard Flow 6oz

    When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

    Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

    Features:

    • 6061-T6 billet machined body, anodized black for lasting protection and appearance
    • Strategically positioned 4 chamber baffle system maximizes oil / air separation 
    • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
    • Sealed with a pre-installed viton O-Ring
    • Includes 2.5mm allen key to remove baffle plates for cleaning
    • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
    • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
    • Optional use drain hole - drain kit included!
    • Universal mounting kit
    Part #: 022798tms01-05KT
    Price: $161.46 (USD) 
    $189.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Liqui Moly Anti-Seize Compound

    Nothing is worse than a seized bolt. You run the risk of rounding off the head or even snapping the bolt all together. This could lead to costly repairs to replace the parts affected or to have the damaged bolt removed. Avoid the head-ache and use this simple anti-seize compound from Liqui-Moly to ensure easy removal of bolts and studs in the future. This specific copper based anti-seize is perfect for high-temp applications such as exhaust bolts and engine components.

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Part #: LM2012
    Price: $8.06 (USD) 
    $8.95 (Sale - Save 10%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    ECS Tuning Wheel Spacers - 17.5mm - 72.6mm CB

    Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

    ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

    ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

     

    This item fits the following BMWs:

    2008-2012 E82 BMW 128i 135 1M
    1988-1991 E30 BMW M3
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2012 E93 BMW 328i 335i M3 - Convertible
    1976-1981 E12 BMW 528i 530i
    1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
    1989-1995 E34 BMW 525i 530i 535i 540i M5
    2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
    1982-1989 E24 BMW 633csi 635csi M6
    2004-2010 E63 BMW 645ci 650i M6
    1981-1987 E23 BMW 733i 735i
    1988-1994 E32 BMW 735i 735il 740i 740il 750il
    1995-2001 E38 BMW 740i 740il 750il
    1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

    Rear Only
    2007-2013 E70 BMW X5M
    2007-2014 E71 BMW X6 xDrive35i X6 xDrive50i X6M

    Part #: ECS#256KT
    Price: $76.46 (USD) 
    $89.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 7/8

    The Schwaben oxygen sensor wrench has a six-point pivot head to provide a secure grip on stubbornly tight oxygen sensors located in awkward, inaccessible locations.

    Features:

    • Premium chrome plated
    • Slotted socket head that slips over the sensor wire
    • Long angled handle for leverage

     

    Part #: FO-78
    Price: $22.46 (USD) 
    $29.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Liqui Moly Voll-Synthese Energy 0w-40 Engine Oil - 5 Liter

    Liqui-Moly's Voll-Synthese Energy engine oil is specifically formulated for optimum oil penetration speed, deposit prevention, and resistance to aging. These factors allow for exceptional gasoline or diesel engine cleanliness, keeping the surfaces of the engine and engine components free from carbon and sludge deposits. This allows the oil to form a stronger film that in turn helps prevent wear much more efficiently than many standard oils. This also allows for easy, smooth engine operation that results in better responsiveness and less total fuel consumption.

    Meets the following requirements;

    • ACEA A3-98/B3-98
    • API SJ-CF
    • BMW [Longlife] LL-98
    • Daimler (MB 229.1)
    • VW 502.00 - 505.00

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Part #: 2050
    Price: $40.46 (USD) 
    $44.95 (Sale - Save 10%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    ECS Tuning Wheel Spacer & Bolt Kit - 17.5mm - 72.6mm CB

    Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

    ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

    This kit includes wheel bolts that are lab tested to meet or exceed ISO 898 class 10.9 mechanical and physical properties to ensure perfect fastening of the wheel to the hub with no issues or potential to snap under aggressive driving conditions.

    ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

     

    This item fits the following BMWs:

    2008-2012 E82 BMW 128i 135 1M
    ​1988-1991 E30 BMW M3
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2012 E93 BMW 328i 335i M3 - Convertible
    1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
    1989-1995 E34 BMW 525i 530i 535i 540i M5
    2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
    1982-1989 E24 BMW 633csi 635csi M6
    2004-2010 E63 BMW 645ci 650i M6
    1981-1987 E23 BMW 733i 735i
    1988-1994 E32 BMW 735i 735il 740i 740il 750il
    1995-2001 E38 BMW 740i 740il 750il
    1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

    Part #: ECS#256KTWB
    Price: $93.46 (USD) 
    $109.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    E63/E64 645ci/650i KW Coilover Kit - Variant 3 (V3)

    Adjustable Rebound & Compression Damping 

    Want full control? The KW V3 gives you multiple settings for both rebound and compression. You have full access over ride comfort and handling to dial in that perfect setup. Race teams rely on adjustments to get that perfect lap time and having shock controls at your fingertips is key. KW V3 features -

    • Separate adjustments for compression (14 positions) and rebound (infinite settings),
    • Stiffer springs over stock for less bodyroll than the standard suspension,
    • Stainless steel strut/shock bodies and composite spring perches for superior corrossion resistance,
    • Individually height-adjustable - Front = 10-40mm lowering; Rear = 20-50mm lowering,
    • TUV approved lowering range and operation,
    • Expert engineering and design for ease-of-use and long durability,

    Whether you track the car often or only use it for backroad carving the V3 will give you the tools to set up an ideal handling condition. You can crank it up for smooth and fast surfaces or soften it for city or rough roads. Since each shock is 2-way adjustable you can alter the front-rear balance to account for brake dive or squat during power application coming out of the corner. You are in total control! 

    Coil over suspensions are better engineered suspension options compared to a standard shock + spring package. Since the springs and shocks in a coil over are designed by a team of engineers to work together, there is much better suspension travel and more precisely tuned specifications for spring and shock rates. Using separate shock and spring specs may result in premature coil bind or shock bottoming. And most coil over kits offer more features than the traditional packages. Coil overs are also more useful when larger wheels/tires are used because you can precisely set the ride heights to clear the new tires. 

    Fitment Note: Wheel spacers may be required depending on wheel/tire sizing and ride height setting. 

    Lifetime warranty! 

    FREE FEDEX GROUND SHIPPING!
    FREE FEDEX GROUND shipping within the 48 contiguous states. 

    This item fits the following BMWs:
    2004-2011 E63 BMW 645ci 650i Coupe
    2004-2011 E64 BMW 645ci 650i Convertible

    Part #: 35220006
    Price: $2603.99 (USD) 
    $2799.99 (Sale - Save 7%)
    Free Shipping Free Shipping
    Quantity:   
    Schwaben Pry Bar / Seal Puller Kit - 3 Pieces

    Having an adjustable pry bar really comes in handy when working in tight spaces as well as making seal replacement much easier.

    Features:

    • Three hardened alloy metal bars in 10, 12, and 15 inch lengths, with knurled, non-slip handle grips.
    • Push button release at pry bar pivot allows the pry head to rotate through a wide arc and lock in place again when the button is released.
    • Packaged in a handy molded case for portability and easy organization.

     

    Part #: PB-3PCS
    Price: $37.46 (USD) 
    $49.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Digital Tire Pressure Gauge

    The digital tire pressure gauge can help you check and correct tire pressures on a regular basis to prevent these problems. Lightweight gauge with a digital display that can measure pressures from 0-150 psi; accurate to 0.10 psi. Display pressure in psi, bar, kg/cm, and kPa.

    Correct tire inflation reduces tire wear and improves vehicle handling and fuel economy. Under inflated tires run hot, wear faster, and reduce fuel economy. They can also illuminate the Tire Pressure Monitoring System (TPMS) warning light on vehicles equipped with the system.

    The gauge has an angled head with a clear digital display and a battery saver features that shuts off the gauge automatically, when not in use. Batteries are included.

    Part #: PJD3238L-2
    Price: $8.21 (USD) 
    $10.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    aFe Pro5R Air Filter - E60 M5, E63/E64 M6 2006-2010 V10 (1 pair) These are drop-in stock replacement aFe performance air filters that install into your BMW's factory airbox. This item includes 1 pair of filters. These filters fit the following BMWs:

    E60 5 series : M5 2006-2010
    E63 E64 : M6 M6 convertible 2006-2010

    This version used aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
    Part #: 30-80168
    Price: $170.10 (USD) 
    $189.00 (Sale - Save 10%)
    Free Shipping Free Shipping
    Quantity:   
    Carbon Fiber License Plate Frame This is a 100% real carbon fiber license plate frame cover. These 3K twill weave carbon fiber license plate frames fit the standard size US license plate. It's perfect for those automobile enthusiasts with carbon fiber parts on their beloved vehicle or just simply wants to add a performance touch.

    Please note that this license plate frame is made of real carbon fiber and not aluminum/ plastic with carbon fiber look, those prints will fade and discolor over time.

    Package will include 1 real carbon fiber license plate frame that fits onto standard size US license plates, screws are not included for the installation.

    Part #: UN-0007
    Price: $33.96 (USD) 
    $39.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Go-Through Screwdriver Kit - 6 Pieces

    Having a quality screwdriver set is a must in all garages, it doesn't stop at car work, but it can start there.

    Features:

    • Made of durable nickel chromoly, these screwdrivers have thick, comfortable handles and hex bolsters that accept a box wrench for added leverage.
    • Special Go-Through design is made for heavy duty tasks: hardened shafts extend the entire length of the screwdriver, from tip through the handle, where they exit at a rounded striking head.

    The set includes the following screwdriver sizes, housed in a blow molded case for portability and easy organization:

    • 5.5x100mm flat head screwdriver

    • 6.5x150mm flat head screwdriver

    • 8x175mm flat head screwdriver

    • #1x75mm Phillips screwdriver

    • #2x100mm Phillips screwdriver

    • #3x150mm Phillips screwdriver

    Part #: DRA739I
    Price: $22.46 (USD) 
    $29.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Specialty Bit Kit - 100 Pieces

    All the right bits in one box. The perfect assortment to keep the job going.

    Features:

    • 10 fractional SAE hex, 9 Torx® tamper-proof, 9 Torx®

    • 9 Metric hex bits, 9 slotted bits, 8 Pozi-drive, 8 Phillips, 4 square-recess, 4 tri-wing

    • 3 spline, 3 Torq, 3 clutch, wing-nut driver, magnetic bit holder and socket bit holder

    • Made of hardened Chrome Vanadium steel for years of dependable use

    • Packaged in a handy blow molded case with individually marked bit slots for easy organization

    Part #: P-100B
    Price: $16.46 (USD) 
    $21.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
     Performance Caliper Guide Bushing Set

    This caliper bushing kit will eliminate flex caused by weak rubber caliper bushings. As the brake pedal is pressed the caliper grabs the rotor and twists on its mounting bushings. The rubber bushings allow the caliper to deflect and twist which affects pedal feel and results in uneven pad wear. These solid brass bushings will not twist or deflect so your calipers can squeeze the pads evenly on both sides of the rotor (sort of like what multi-piston big brakes do). This will give you much longer pad life and a more consistent pedal feel. This is the most complete kit we have ever sold with stainless steel caliper slide bolts, o-rings, and new dust boots. Unlike other kits, these bushings are pressed into the caliper and will not shift or slide on their own.

    Installation is straightforward: remove the old rubber bushings and press in the new brass bushings (we recommend special tool 003326ECS03). High temp caliper grease or anti-seize is required. The new bushings include an inner o-ring that helps trap grease on the slide bolt, reducing friction and wear. Instructions are included.

    Enter your model for specific fitment notes.

    Part #: 003326ECS02
    Price: $101.96 (USD) 
    $119.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 8-In-1 Oil Drain/Fill Plug Wrench

    The tough swivel heads fit an assortment of hexagonal and square recessed drain plugs. A strong magnet on the wrench handle keeps drain plugs handy until they are ready to be reinstalled.

     

    Features:

    • Made of vanadium steel for strength, with chrome plated, corrosion resistant surface.
    • Hex sizes: 10, 12, 14, 17
    • Square head sizes: 8, 10, 3/8” and ½”
    Part #: W-136PNM
    Price: $14.96 (USD) 
    $19.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 3/8

    Proper torque is very important when it comes to working on engines. The importance comes from proper sealing and to keep from damaging threads.

    Features:

    • Reversible 3/8"-inch drive click-to-stop
    • Torque range of 5 to 80 ft-lb
    • Accurate to within +/-4%
    Part #: TW-38365
    Price: $27.71 (USD) 
    $36.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Liqui Moly Long Life Grease with MoS2 - 100 grams

    Made specifically for long periods of lubrication for extremely high bearing pressures and high pressure surface contact, this grease with the added MoS2 Anti-Friction modifier is great for things such as c.v. joints, bearings, guides, and spline shafts.

    Long term protection for frictions heavy components.

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Part #: 2003
    Price: $4.46 (USD) 
    $4.95 (Sale - Save 10%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Deep Well Impact Socket - 27mm

    Durable Impact sockets for hard to remove fasteners safely.

    Features:

    • Brawny ½-inch drive 27mm 12-point socket
    • Specially hardened to take the added abuse from a impact gun, this socket is also coated for added protection and so you can tell it apart from non impact rated sockets
    • Accommodating 53mm depth to accommodate many applications and different length shafts.
    • Made of durable chrome moly steel, this socket is tough enough to get the job done.
    Part #: 003302SCH04A
    Price: $14.96 (USD) 
    $19.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Deep Well Impact Socket - 36mm

    This large socket is the perfect tool for axle nuts when servicing the axle shafts or wheel bearings.

    Features:

    • ½-inch drive 36mm 12-point socket
    • Specially hardened to take the added abuse from a impact gun
    • Coated for added protection and so you can tell it apart from non impact rated sockets
    • 75mm depth  to accommodate many applications and different length shafts
    • Made of durable chrome moly steel
    Part #: 003302SCH02A
    Price: $14.96 (USD) 
    $19.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Metric Bubble Flaring Tool Set

    When replacing old corroded brake lines this is a must have tool to get the job done right. Create a bubble flare to match the connection style is an important part of creating the proper seal. Don't forget your tube cutter.

     

    Features:

    • Creates the ISO bubble flare found on European, Japanese and some domestic model brake lines.
    • Includes hardened steel bar and adapters for 4.75mm,6mm,8mm and 10mm tubing.
    • Durable blow molded case for easy transport and organization

     

     

    Part #: 006394SCH01A
    Price: $49.96 (USD) 
    $79.95 (Sale - Save 38%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben LED Underhood Shop Light

    This underhood light was designed especially for automotive under the hood work. Featuring 120 super bright LEDS for complete engine bay illumination. Built from heavy duty materials, Thermoplastic Rubber, Aluminum and ABS . LEDS are fully protected by a polycarbonate transparent lens.To protect the hood from scratches, hooks have a soft foam covering. LEDs are designed to last up to 100,000 hours for years of trouble free service.

    Features:

    • Corded 120 LED's
    • Rugged heavy-duty design for long life.
    • Made from ABS, thermoplastic rubber and aluminum.
    • Polycarbonate transparent lens.
    • Spring loaded built in telescopic mounting brackets hold tight onto hood.
    • Soft padded hooks provide good protection against hood scratches.
    •  Long 15ft power cord.
    • Two working modes : Low beam and high beam illumination.
    • On and off power switch.
    • Working hood width : 48 to 74 in.

     

     

    Part #: 006191SCH01A
    Price: $74.96 (USD) 
    $99.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 12 Pc Metric Combination Wrench Set

    Quality combination wrenches are a must when doing any kind of automotive work.

    Features:

    • A complete set from 8 to 19 mm 
    • Professional quality wrenches in full length feature open end on one end and 12 pt box on the other
    • Satin finish provides superior feel, slip resistant grip, easy cleanup and inhibits rust
    • Includes sturdy wrench holder for easy storage
    • Limited Lifetime Warranty

     

    Part #: 005989SCH01A
    Price: $44.96 (USD) 
    $59.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 1/2 If you're looking to remove a stubborn bolt and the smaller hand tools just don't cut, it's time to get a breaker bar. 1/2" Drive for added strength, 24" handle for powerful leverage, and a rounded ergonomic handle so discomfort isn't holding back your strength.
    Part #: 006535SCH01A
    Price: $26.21 (USD) 
    $34.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 2-pc 56

    Ideal for smaller sports cars with short noses.  Great for quick oil changes and underbody maintenance.

    Please take measurement below before ordering.

     

    Features:

    • Lightweight at only 4 lbs each and Withe handy carrying straps
    •  Will not slip, slide or scoot on any surface and never scratches or marks your floor
    •  100% solid core construction for additional strength
    •  56 " long,12" wide, 8" lift height, at 15 lbs each and a low 10.8 degree incline
    • Great for quick oil changes and underbody maintenance.

       

       

     

     

     

     

    Part #: 006143SCH01A
    Price: $165.00 (USD) 
    $220.00 (Sale - Save 25%)
    Quantity:   
    LED Bright White Angel Eye Bulb Upgrade- E39 E60 E63 E65 X5 X3 When we wanted our E92 M3 to stand out during the Rolex 24 at Daytona we installed these super bright LED angel eye bulbs. They transformed the dim yellow appearance of the factory angel eyes to a bright white light that helps your BMW stand out from the crowd. As part of our preparation before the race we tested tons of different bulbs from dozens of manufacturers. These bulbs offered the highest brightness of any bulb we tested and more importantly the quality of construction was unsurpassed. They lasted the whole 24 hours with no issues! The last thing we wanted was for our M3 to have a black eye or experience the flickering common on lower quality bulbs. If they can withstand the intensity of one of the worlds toughest races then they will certainly perform well on the street.

    These upgraded LED angel eye bulbs are easy to install and won't cause any check control system warnings. Sold as a pair. One kit will illuminate all 4 angel eye rings on your BMW. Made from high quality machined aluminum.

    This item fits the following BMWs:
    2001-2003 E39 BMW 525i 530i 540i M5
    2004-2007 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
    2004-2007 E63 BMW 645ci 650i M6
    2002-2008 E65 BMW 745i 745li 750i 750li 760i 760li
    2004-2006 E53 BMW X5 3.0i X5 4.4i X5 4.8is
    2007-2010 E83 BMW X3 3.0i X3 3.0si
    Part #: LHUXX1W3Y
    Price: $131.71 (USD) 
    $154.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Strut Spring Compressor Set

    Professional Spring Compressor Kit  will compress most styles of strut springs. This is a safe and efficient way to compress strut springs. This set is supplied with everything you need to get the job done like a pro. Each jaw has safety lips to eliminate slip and is designed to fit the pitch of the spring to ensure maximum surface contact between the jaws and the spring, thus eliminating the risk of the compressor slipping around the spring. The spindle is driven by a 21mm hex nut and is not designed to be used with a impact gun. Hand turn the nut with a wrench or hand ratchet.

    Features:

    • Interchangeable jaws are easily changed to correct size for the application
    • Compressor Body Shaft
    • 80-115 mm Yokes
    • 110-150mm Yokes
    • 140-195mm Yokes
    • conical spring adapter 
    • Blow molded case 
    • Maximum jaw opening is 300mm
    Part #: 013845sch01A
    Price: $149.96 (USD) 
    $199.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    LUX H8 V5 Color Adjustable Angel Eyes - E60/3 LCI E70 E71 E84 E89 E90 LCI E92 pre-LCI
    • 9 color settings from 5,000K – 12,000K
    • The halogen equivalent of 120 watts of light
    • 100% no Dimming in all headlight modes
    • No flickering on Self Check Sequence
    • Fully Fused and No EMI
    • New Heatsink design for Much easier installation

    The LUX H8 V5 angel eyes use 8 of the latest and most efficient Cree LED's to offers unmatched brightness while its patented design makes both the inner and outer angel eyes as bright as possible. The patented heat sink design has a single flat side which correlates with the connector side of a standard H8 bulb, allowing for easier orientation when installing

    LUX H8 V5 angel eyes produce a total of 2400 lumen which is the halogen equivalent of 120 watts!  The stock 35 watt halogen bulb receives only 80-90% power and then drops to 50% power when utilized with the headlights; thus causing the angel eyes to become much dimmer. This is done to reduce heat within the headlight housing.  Our LUX H8 V5 angel eyes compensate for this dimming and always operate at full power allowing them to be clearly visible in the daytime. When locking the car, the the LUX will pulse off rather than fade.  Our LED bulbs use a fraction of the power allowing them to run cooler and have a longer lifespan.

    This item fits the following BMWs:
    2008-2010 E60 BMW 528i 528xi 535i 535xi 550i
    2008-2010 E63 BMW 650i M6
    2007-2013 E70 BMW X5 xDrive35i X5 xDrive35d X5 xDrive48i X5 xDrive50i X5M
    2007-2013 ​E71 BMW X5 xDrive35i X6 xDrive50i X6M
    2008+ E82 BMW 128i 135i - Coupe
    2008+ E88 BMW 128i Convertible 135i - Convertible 
    2008-2016 E89 BMW sDrive28i sDrive30i sDrive35i sDrive35is
    2009-2011 E90 BMW 328i 328xi 335i 335xi 335d - Sedan
    2009-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2010 E92 BMW 328i 328xi 335i 335xi M3 - Coupe
    2007-2010 ​E93 BMW 328i 328xi 335i M3 - Convertible

     

    Part #: LUXH8V5
    Price: $165.00 (USD) 
    $175.00 (Sale - Save 6%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben By Foxwell Professional Scan Tool For Most BMWs and MINI Coopers

    The BMW Service Engine Soon (aka Check Engine Light) has thousands of different meanings. Everything from low coolant messages, engine misfires, transmission temperatures, light bulb failures, brake pad replacement, and so much more. The sophisticated electronics are throughout the car. Isn't it time for a BMW scan tool that can keep up with all of your DIY needs? We think we've found the one - the DIY BMW diagnostic tool that trumps them all. The Schwaben BMW scan tool.

    Not all diagnostic scan tools are the same. The cheap ones you find at catalog outlet stores are generic and give you generic information (sometimes not even that). BMW actually has very specialized diagnostic systems that they only share with dealers. The factory diagnostic tools require specialized programs on dedicated laptops that are a pain for the average DIYer to set up and use. The Schwaben BMW diagnostic tool is designed specifically for BMW and MINI. It's not generic and packs some serious features in its small case. We've used this in our service department and were very impressed with the depth of its capabilities. It has features that only the factory ISTA/INPA programs have. Below is a partial list of its prime features -

    • Works on BMW models from 1987-current*; Works on MINI models from 2002-current*
    • Compatible with global OBDII / EOBD standards
    • Reads and clears codes and turns off SES/CEL/MIL/DTC (BMW Powertrain codes, Chassis codes, Body codes, and CAN codes)
    • Special troubleshooting functions to walk you through codes (like the BMW Test Plan)
    • Check and activate electronic components like switches, relays, and actuators
    • Records live sensor data
    • Provides live data graphing
    • Merges graphs for easy and intuitive diagnosis
    • Displays freeze frame data
    • Create a custom data stream
    • Reads and resets most adaptations
    • Reads OBD Readiness
    • Does active tests on systems and components*
    • Performs special functions, coding, security access*
    • Code and program replacement control units
    • Supports all 10 OBDII test modes
    • Resets oil service light
    • Sets inspection 1, 2 service intervals (manual or automatic)
    • Sets inspection mileage
    • Deactivates and reactivates brake control system
    • Retracts calipers for brake pad replacement on newer models
    • Initializes the wear indicator if new pads installed
    • Diagnoses Electronic Parking Brake caliper functionality
    • Multilingual menu options and code definitions
    • Memory card for data backup and software update
    • Print feature
    • Large TFT color screen and menu-driven operations
    • Free life time updates

    *Certain functions may be limited due to the requirement of a special factory access code or tools. While versatile, this scan tool covers a wide range of BMW models and platforms and it cannot be a catch-all tool for every job. Some functions may not be available but will be reviewed in future updates.

    Note: Microsoft PC required for updates. You will need to register your scan tool in order to receive update notices via e-mail.

    Vehicles with 20 pin under hood connector will require the separate adapter for use. Click here for link.

    Part #: 014020SCH01A
    Price: $149.96 (USD) 
    $199.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    Quantity:   
    Posi Quiet Brake Pads - Front - E60 M5, E63 M6 Centric Posi Quiet Brake pads surpass the braking performance of stock pads but do it with far less dust. This semi-metallic pad compound is very easy to use on the street with excellent feel and initial bite and low noise. But the best thing we like with these pads is how little dust they produce. You will be amazed at how little dust there is on your wheels after a week of use. These are a great replacement pad for fans of the discontinued PBR Metal Master Pads.

    Position: both front calipers

    This item fits the following BMWs:
    2006-2010 E60 BMW M5
    2004-2011 E63 E64 BMW M6
    Part #: TMS209140
    Price: $53.06 (USD) 
    $58.95 (Sale - Save 10%)
    Quantity:   
    Brembo Calipers F40, F50, B, H, GT1 - Street Brake Pad Set - StopTech Street Performance The StopTech Street Performance brake pads just may be the best all-around pad on the market today. Manufactured from a proprietary para-aramid material (similar to Kevlar) that works well when cold, produces a strong initial bite, fade-resistant on the track, and low noise and low dust. It's unbeatable performance for the price! The Street Performance compound is standard in all StopTech big brake kits and are now available for your Brembo calipers.

    This pad set fits the following Brembo 4-piston calipers:
    F40 / F50 / Type B / Type H / GT1 / Monobloc P

    F40 calipers are found in many Brembo GT Big Brake Kits, including these BMW models:
    2008-2012 E82 BMW 128i 135i 1M Coupe
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2013 E93 BMW 328i 335i M3 - Convertible
    2012+ F30 BMW 328i 335i - Sedan
    1989-1995 E34 BMW 525i 530i 535i 540i M5
    1997-2003 E39 BMW 525i 528i 530i 540i M5
    2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
    2010+ F07 BMW 535i GT, 535i xDrive GT, 550i GT, 550i xDrive GT
    2011+ F10 BMW 528i 535i 535i xDrive 550i 550i xDrive M5
    2004-2011 E63 BMW 645ci 650i M6
    2012+ F13 BMW 640i 650i
    1988-1994 E32 BMW 735i 735il 740i 740il 750il
    1995-2001 E38 BMW 740i 740il 750il
    2002-2008 E65 BMW 745i 745li 750i 750li 760i 760li
    2009+ F01 BMW 740i 740li 750i 750li 750i xDrive 750li xDrive 760li
    1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
    2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
    2011+ F25 BMW X3 xDrive28i X3 xDrive35i
    2000-2006 E53 BMW X5 3.0i X5 4.4i X5 4.6is X5 4.8is
    2007-2013 E70 BMW X5 3.0si X5 4.8i X5 xDrive30i X5 xDrive35d X5 xDrive35i X5 xDrive48i X5M
    2008+ E71 BMW X6 xDrive35i X6 xDrive50i X6M
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    2009+ Z4 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
    Part #: TMS16482
    Price: $74.65 (USD) 
    $82.95 (Sale - Save 10%)
    Quantity:   
    Posi Quiet Brake Pads - Rear - E60, E63, E82 1M, E9X M3 Centric Posi Quiet Brake pads surpass the braking performance of stock pads but do it with far less dust. This semi-metallic pad compound is very easy to use on the street with excellent feel and initial bite and low noise. But the best thing we like with these pads is how little dust they produce. You will be amazed at how little dust there is on your wheels after a week of use. These are a great replacement pad for fans of the discontinued PBR Metal Master Pads.

    Position: both rear calipers (should only be combined with Posi Quiet front pads).

    This item fits the following BMWs:
    2008-2012 E82 BMW 1M Coupe
    2006-2011 E90 BMW M3 - Sedan
    2007-2013 E92 BMW M3 - Coupe
    2007-2013 E93 BMW M3 - Convertible
    2004-2010 E60 BMW 535i 545i 550i M5
    2004-2011 E63 BMW 645ci 650i M6
    Part #: TMS209148
    Price: $43.16 (USD) 
    $47.95 (Sale - Save 10%)
    Quantity:   
    StopTech Street Performance Brake Pads - Front - E60, E63, E65, E82 1M, E9X 335, E9X M3 As used on the Lime Rock M3
    StopTech Street Performance front brake pads are designed for high-performance street drivers who want a high-quality and capable pad that won't break the wallet. These pads feature an innovative composite compound that is quiet, great bite and modulation, low fade under hard street-type use (and autocross, light track). We've tried these pads and love how capable they were when used hard but also how easy they were for regular stop-and-go driving. This might be the last brake pad you will ever need!

    Position: both front calipers

    This item fits the following BMWs:
    2008-2012 E82 BMW 1M Coupe
    2006-2011 E90 BMW 335d 335i 335xi 335i xDrive - Sedan
    2007-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
    2007-2013 E93 BMW 335i - Convertible
    2006-2011 E90 BMW M3 - Sedan
    2007-2013 E92 BMW M3 - Coupe
    2007-2013 E93 BMW M3 - Convertible
    2004-2010 E60 BMW 525i automatic transmission only
    2004-2010 E60 BMW 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i
    2004-2011 E63 BMW 645ci 650i
    2002-2008 E65 BMW 745i 745li 750i 750li 760i 760li
    Part #: TMS12164
    Price: $89.06 (USD) 
    $98.95 (Sale - Save 10%)
    Quantity:   
    Compact European Pressure Brake Bleeder

    Need to bleed your brakes in the near future? This Compact European Pressure Brake Bleeder is perfect for the job and has many features that makes the job significantly easier. It has all of the features of the Schwaben full sized brake bleeder kit.

    Features:

    • 45 mm euro master cylinder adapter.
    • Hand held pump with 30 psi gauge .
    • 36" long hose on pump to bottle.
    • 22" long hose from bottle to master cylinder cap adapter.
    • Convenient hook on fluid bottle allows bottle to hang above master cylinder, out of the way.
    • Bottle has a pressure relief valve.
    • Includes 12" waste oil tube for bleeder.
    • 400cc Container
    Part #: 018222SCH01A
    Price: $20.96 (USD) 
    $27.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Gas-Slotted Brake Rotors (Pair) - Rear - E60 535i, 545i, 550i - E63 645ci, 650i Direct replacement REAR gas-slotted brake discs for E60. These rotors feature a unique black electro-coating that is designed to prevent corrosion. Each rotor is e-coated then double-ground and balanced to ensure an even surface with no vibration. The e-coating is the best anti-corrosion protection currently available in replacement rotors. Most aftermarket rotors are not coated, allowing surface rust to form right away, which is unattractive when brakes can be seen through your wheels.

    Slotting a rotor helps to release gases that build up between the rotor surface and an out-gassing brake pad. Without an escape, this thin layer of gas will cause a delay until the pad cuts through gas layer. The slots in our rotors allow the gases to escape giving better braking performance. For track and racing use, slotting is preferred over cross-drilling because the slots don't take away as much mass from the rotor and won't suffer from structural cracks.

    Sold as a REAR pair.

    This item fits the following BMWs:
    2004-2010 E60 BMW 535i 545i 550i
    2004-2010 E63 BMW 645ci 650i
    Part #: 34216763827GS
    Price: $194.31 (USD) 
    $215.90 (Sale - Save 10%)
    Quantity:   
    Stoptech Stainless Steel Brake Lines - E60 5 Series E63 6 Series These braided stainless steel lines for the BMW E60 M5 and E63 M6 improve the performance and safety of your BMW's braking system. They are DOT and German TUV approved, feature a resilient coating to protect against wear and chafing, and offer tremendous quality at a phenomenal price. These brake lines are made by renowned brake experts, Stoptech, and are ready for the rigors of daily street driving, driving schools, autocross and race events. Each set includes 4 brake lines - 2 front and 2 rear - as well as pre-installed grommets on the front for ideal fit.

    Stoptech▒ Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

    StopTech▒ brake lines consist of a PTFE (commonly referred to as Teflon▒) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

    The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

    These stainless brake lines fit the following BMWs:
    2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i M5
    2004-2010 E63 BMW 645ci 650i M6
    Part #: PLBE60M5
    Price: $112.46 (USD) 
    $124.95 (Sale - Save 10%)
    Quantity:   
    Turner Motorsport 16 oz. Pint Glass Combine your love of Motorsport and beer with this go-to glass for beer enthusiasts. This 16 oz. pint glass has an iconic cylindrical shape that tapers toward the bottom for a simple style that's sure to please. It's perfect for serving most types of beers, including ales, IPAs, stouts, and lagers. Use it for cider, soda and ice water too! This glass is great for virtually any cold beverage with a versatile 16 oz. size.

    Part #: TMS-PINTGLASS
    Price: $5.09 (USD) 
    $5.99 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    E63 645ci Supersprint Left Performance Muffler (2x80mm Tips) Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

    NOTE: Supersprint engineers and manufactures complete exhaust systems. This part was designed to be used with the rest of the Supersprint system on this car but may be used on its own. Contact us for more details.
    Part #: 788536
    Price: $690.14 (USD) 
    $920.18 (Sale - Save 25%)
    Free Shipping Free Shipping
    Quantity:   
    E60 M5, E63 M6 Supersprint Section 1 Metallic Sport Cats

    Free ground shipping!

    Supersprint sport cats for the M5/M6 are designed to work with their performance headers and replace the stock secondary cats. The Supersprint sport cats are much freer-flowing than a factory-style cat. With less restriction, less effort is required to move the exhaust gasses which will free up horsepower and torque. This cat section will mount to the Supersprint merge collectors and then to a Supersprint or stock section 2. These are built with O2 sensor bungs pre-installed after the cat if you wanted to extend your stock post-cat O2 sensors (however, special software may still be needed).

    Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

    Supersprint metallic sport catalytic converters are sourced from HJS of Germany. For 30 years HJS has been supplying motorsports teams with sport cats when rules required them. HJS is now a worldwide leader in sport cat technology and performance. Rally cars, German DTM, and Formula 3 all rely on HJS for clean, reliable horsepower. Supersprint works closely with HJS to spec a catalytic converter that is correct for the vehicle and engine package. This allows for a substantial increase in flow but which, at the same time, keeps the environmental specs within European limits. With any high-flow catalytic converter, special software or other work may be required to keep emissions fault codes and check engine lights from displaying. Supersprint catalytic converters are sold for track and other off-road uses only.

     

    section:section 1 with metallic sport cats

    connects to:Supersprint headers; Supersprint or stock section 2

    material:T304 stainless steel

     

    This product modifies (but does not remove or defeat) emissions equipment. For this reason this product may not be CARB compliant, and therefore not emissions legal in some states. Consult local laws and regulations in your area. For more information on this product, feel free to contact our sales department.

     

     


    This item fits the following BMWs:
    2006-2010 E60 BMW M5
    2005-2011 E63 BMW M6

    Part #: 988702
    Price: $2299.40 (USD) 
    $3065.87 (Sale - Save 25%)
    Free Shipping Free Shipping
    Quantity:   
    E63 650i Supersprint Right Performance Muffler (1 120x80mm Tips)

    Free ground shipping!

    Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

    NOTE: Supersprint engineers and manufactures complete exhaust systems. This part was designed to be used with the rest of the Supersprint system on this car but may be used on its own. Contact us for more details.

    Part #: 788545
    Price: $592.16 (USD) 
    $789.55 (Sale - Save 25%)
    Free Shipping Free Shipping
    Quantity:   
    Turner Loaded Backpack Gift Package

    Pick up our rugged OGIO backpack along with some Turner goodies and pocket nearly $25 in savings! Spoil yourself this season!

    Our "Stuffed Backpack" package includes:
    + $50 Turner Gift Certificate
    + Turner OGIO Backpack
    + Turner Pint Glass
    + Turner Cap
    + Turner Keychain
    + Turner Motorsport Sticker Sheet

    Part #: GP153
    Price: $115.86 (USD) 
    $140.00 (Sale - Save 17%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    E63 M6 Supersprint Stainless Right Racing Muffler

    Free ground shipping!

    Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

    NOTE: Supersprint engineers and manufactures complete exhaust systems. This part was designed to be used with the rest of the Supersprint system on this car but may be used on its own. Contact us for more details.

    Part #: 044706
    Price: $669.71 (USD) 
    $892.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    Quantity:   
    Turner Motorsport Snapback Baseball Hat One size fits all, embroidered baseball cap. The hats have "Championship BMW Race Team" on the back and the Turner logo on the left front. 80% Acrylic and 20% Wool.
    Part #: TMS224334
    Price: $21.21 (USD) 
    $24.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    E63/E64 645ci/650i Supersprint Performance Exhaust System

    Free ground shipping!

    This full Supersprint exhaust for the V8 645ci and 650i will punch up the sound to give your car a more athletic and sporting experience. The stock system incorporates a muffler and two sets of resonators and is very good at keeping engine noise at luxury-car levels but if you've wanted more of that V8 growl to come through this Supersprint system should be just right. This system features a free-flowing stainless steel sport muffler matched with stainless pipes from the headers back to eliminate both sets of resonators. Without the resonators and with less restrictive mufflers, more of that glorious V8 engine sound can be heard. And less restrictions in the exhaust mean the engine is working less to move exhaust gas and that means a substantial increase in torque and horsepower.

    Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

     

    section:section 1 and 2 resonator delete pipes, rear muffler

    connects to:stock headers

    tip style:120x80mm dual oval

    material:T304 stainless steel


    This item fits the following BMWs:
    2005-2007 E60 BMW 645ci 650i

    Part #: 788500
    Price: $2282.06 (USD) 
    $3042.75 (Sale - Save 25%)
    Free Shipping Free Shipping
    Quantity:   
    Turner Motorsport Holiday Ornament This is the "Turner Blue" ornament to show off your enthusiasm for motorsport! The colorful blue ornamental ball perfectly displays the Turner Motorsport logo and looks great on any tree or holiday decoration. This ornament is 3.25" diameter and made of non breakable abs plastic.
    Part #: TMS208377
    Price: $8.46 (USD) 
    $9.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Brake Duct Hose Kit - 3 inch with clamps If you are adding fully functional brake ducts to your track or race car, this hose kit is a must. It includes two 4 foot lengths of high-temp duct hose and 4 appropriate sized hose clamps. This is the same duct hose we use in our reknowned racing brake duct kits & our championship winning BMW race cars. This is the best suited and highest quality hose for the job. We wouldn't use anything less -- would you?
    Part #: TBR9962303
    Price: $76.46 (USD) 
    $89.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    E63 645ci Supersprint Left Performance Muffler (1 120x80mm Tip)

    Free ground shipping!

    Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

    NOTE: Supersprint engineers and manufactures complete exhaust systems. This part was designed to be used with the rest of the Supersprint system on this car but may be used on its own. Contact us for more details.

    Part #: 788535
    Price: $592.16 (USD) 
    $789.55 (Sale - Save 25%)
    Free Shipping Free Shipping
    Quantity:   
    aFe Throttle Body Spacer - E53 X5, E60 E63 E64 Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque - +5 hp, +2.5 lbs/ft torque - and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers. This throttle body spacer is 50-state legal (CARB E.O Number D-516-2).
    This throttle body spacer fits the following BMWs:

    E60 5 series : BMW 545i 2004-2005
    E63 E64 6 series : BMW 645ci, + Convertibles 2004-2005
    E65 E66 7 series : BMW 745i, 745li 2002-2005
    E53 X5 : BMW X5 4.4i 4.6is 2000-2006
    Part #: 46-31001
    Price: $179.10 (USD) 
    $199.00 (Sale - Save 10%)
    Free Shipping Free Shipping
    Quantity:   
    Schwaben Strut Nut Socket - 24mm To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.
    Part #: 003046SCH01A-05
    Price: $11.21 (USD) 
    $14.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Strut Nut Socket - 18mm To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.
    Part #: 003046SCH01A-01
    Price: $11.21 (USD) 
    $14.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Strut Nut Socket - 21mm To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.
    Part #: 003046SCH01A-03
    Price: $11.21 (USD) 
    $14.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Wheel Storage Rack With Casters

    Now you can stack your extra wheels without the danger of scratches and scuffs. This wheel storage rack keeps your wheels spaced apart, and being on locking casters, allows you to easily move the whole set anywhere in your garage or shop at one time. Sturdy steel construction and a wide base means this wheel rack won't tip over. Holds up to 275 lbs - enough for most any wheel & tire set.

     

     

    Fits up to 8½" wide wheels, depending on offset

    Part #: 003639SCH01A
    Price: $41.21 (USD) 
    $54.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    Quantity:   
    Wall-Mounted Wheel & Tire Storage Rack

    As any mechanic either at home or in a shop knows, there is rarely enough usable floor space. At least with a wall mounted tire rack you can count on the spare tires to be out of your way. Space is not the only factor for choosing a wheel storage product like this, most people don't realize that a concrete floor actually draws moisture leaving your tires to dryout even faster.


    Features:

    • Adjustable links allow you to store any size from 12" wheels to 19" wheels with tires
    • Folds flat against the wall when not in use to maximize your usable space
    • Supports up to 250 lbs and weighing in at only 20 lbs itself
    • 46" wide storage area (holds up to four 11½" wide tires)
    • Sturdy steel construction
    • Mounting holes spaced 48" apart for mounting to standard center studs
    Part #: 003638SCH01A
    Price: $44.96 (USD) 
    $59.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    Quantity:   
    Schwaben Remote Starter Switch

    Great for compression tests, aligning timing marks, belt installation and much more.

    Features:

    • High 20 amp rating.
    • 5 ft heavy duty leads.
    • Convenient hot circuit indicator light.
    • Non-slip rubber grip.

     

    Part #: 010611SCH01A
    Price: $22.46 (USD) 
    $29.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Professional Magnetic Camber/Caster Gauge

     Make precision camber and caster adjustment easily and quickly. 

    Can be mounted directly to the hub on some cars or a wheel mount kit.

    Features:

    • Reads camber from +6° to -6° accurate to 1/4°.
    • Caster readout from +12º to -4º in 1/2º increments.
    • Strong magnetic adapter.
    • Long lasting black powder-coated finish.
    • Comes with silver carrying case with foam insert for storage and on the go adjustments
    Part #: 010887SCH01A
    Price: $104.96 (USD) 
    $139.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 5

    The Schwaben Pistol Grip Locking Pliers, a unique pistol style that is ideal in locations that do not allow the use of regular locking pliers.

    Features:

    • The hammer-like lock release is easily pressed in tight locations giving maximum usability to the user
    • Durable, rubberized grip covers provide a comfortable, non-slip grip to ensure your hands have a solid hold at all times
    • Quickly and easily adjust the gate of the jaws for a secure clamp with the easy to use barrel adjuster
    Part #: 014565SCH02A
    Price: $26.21 (USD) 
    $34.95 (Sale - Save 25%)
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 90 Piece Zippered Tool Bag Kit

    Use it in your garage or take it to the track. Contains our most popular hand tools for your European vehicle so you are always prepared.

    Features:

    • Metric 3/8" Drive Socket Set
    • 3/8" Drive Ratchet
    • 8-19 mm Combination Wrench Set
    • External Torx Socket Set
    • 4 pc Plier Set
    • 4 pc 3/8" Extension Set
    • 46 pc 1/4" Drive Set
    • Tool Bag
    Part #: 014121sch01aKT1
    Price: $223.20 (USD) 
    $297.60 (Sale - Save 25%)
    Free Shipping Free Shipping
    Quantity:   
    Replacement StopTech 332x32mm Rotors for Big Brake Kits - Left & Right Pair Replacement StopTech AeroRotor for big brake kits - 332mm diameter, 32mm thickness. Choose from either slotted or cross-drilled and standard finish or corrosion-resistant zinc coating. Comes with new mounting hardware to re-use the original StopTech mounting hat. This is for a Left and Right Pair.

    Size: 332x32mm
    Type: Gas-Slotted or Cross-Drilled
    Finish: standard finish (no coating), or zinc coating
    Fitment: Left and Right Pair
    Applications: Fits any StopTech Big Brake Kit that uses the 332x32mm disc.
    Part #: ST0PTECH332X32
    Price: $586.71 (USD) 
    $651.9 (Sale - Save 10%)
    Free Shipping Free Shipping
    on orders $199 and up
    Turner Motorsport Double Win T-shirt 2013 These 100% cotton t shirts feature the #94 and #96 Turner Motorsport BMW M3s as raced in the Grand Am Series on the back with the Turner Motorsport Logo on the front. Available in sizes Small-XXL.
    Part #: TMS338546
    Price: $14.99 (USD) 
    $ (Sale - Save 0%)
    Free Shipping Free Shipping
    on orders $199 and up
    Upper Spring Hats/Perches (Pair) - 2.25 Inch / 16mm Pin / Square Seat Made in the USA These aluminum upper spring hats are for coil over struts with a 2.25" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

    Spring I.D.Strut Pin Diam.Strut Pin Seat
    2.25"16mmsquare

    Part #: TSU998062A
    Price: $67.96 (USD) 
    $79.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Seasonal Tire Tote (Set of 4) Tire carrying and storage system that alleviates the mess and strain of seasonal tire change. 

    Benefits:  
     + Protects clothing from tire and brake residue
     + Easier to carry tire
     + Protects vehicle interior from tire & brake residue
     + Organizes garage
     + One size fits all
     + Extends the life of the tire
     + Machine Washable
    + Rugged long lasting construction

    Kit Includes : - Four Tire Bags, fit most passenger vehicles. (22" through 31" tire)
    Part #: 36
    Price: $25.00 (USD) 
    $49.95 (Sale - Save 50%)
    Free Shipping Free Shipping
    on orders $199 and up
    Turner BMW 20mm Wheel Spacers (Pair) - Most BMWs (see applications)

    20MM (.79 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4

    Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems --

    • Correct wheel offset issues
    • Achieve a flush fitment instead of the "tucked under" look
    • Clearance the wheel from contact with other components (suspension, brakes, etc).
    • Improve handling and stability by increasing track width

    A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required.

    These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is light weight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market!

    Turner Wheel Spacer Features --
    + hub-centric design, 1-piece spacer
    + precise tolerance fitment thanks to CAD process and CNC mill machine
    + aerospace grade aluminum  light weight but very strong with a high resistance to corrosion
    + additional military-spec hardcoat for further corrosion resistance
    + innovative Quick Release pockets for easy removal (better than a chamfered back edge)
    + laser engraved size and part number for easy identification
    + stealthy anthracite or black color
    + extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available)
    + Turner Motorsport track and street tested!
    + Made in the USA

    Extended Wheel Bolts
    Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing.

    Spacer Specs:
    (click to expand)
    Spacer Specs:
    bolt pattern:5 x 120
    center bore:72.6mm
    hubcentric?yes
    wheel pad size:normal

    Year & Model Applications
    (click to expand)
    2008-2012 E82 BMW 128i 135 1M
    1988-1991 E30 BMW M3
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2012 E93 BMW 328i 335i M3 - Convertible
    1976-1981 E12 BMW 528i 530i
    1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
    1989-1995 E34 BMW 525i 530i 535i 540i M5
    2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
    1982-1989 E24 BMW 633csi 635csi M6
    2004-2010 E63 BMW 645ci 650i M6
    1981-1987 E23 BMW 733i 735i
    1988-1994 E32 BMW 735i 735il 740i 740il 750il
    1995-2001 E38 BMW 740i 740il 750il
    1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
    Part #: TWH9905020
    Price: $83.26 (USD) 
    $97.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Turner Performance Software For The E60 M5, E63/E64 M6

    INSTANT POWER GAIN WITH NO DOWNSIDE! 

    Max HP gain = 25 hp @8200rpm
    Max Trq gain = 20 ft-lbs @6900rpm
    Rev Limit = 8,250 or 8,500 RPM 

    Adding power and torque to the M5 V10 is as easy as a flash! Where we can make our software better is by tuning it for higher octane gasoline. The stock software is tuned around the 87 octane available in the US (most M5 owners would never use 87 but BMW engineers must account for that possibility). With our software, the performance of the S85 engine is optimized for the higher 91 or 93 octane. We tune many areas of the engine programming -

    • fuel and timing maps at part throttle and wide-open throttle,
    • revised torque settings and knock control,
    • improved VAN0S variable valve timing,
    • smoother and faster pedal response
    • top speed limiter eliminated
    • optional raised rev limit

    Our software uses a new version of stock BMW software as its base. Even the new stock software is an improvement over the original M5. If you have other modifications done to your M5/M6, we can supply you with specially-developed software to maximize the gains from those upgrades.

    Turner Motorsport has been developing software on the S85 since our first car in 2006. Since then we have done software projects for street, track, and 5.7L stroker engine builds using the stock MSS65 DME. Engine tunes have been developed and checked on our Dynapack chassis dyno and further refined with real world testing. For track cars, our Stage 2 cat-delete software will clear check engine lights and faults (to satisfy race series regulations).

    Our software is installed via the Turner flashing OBD tool. This tool plugs into the OBD socket in the dash and the performance software is installed from a laptop computer connected to the tool. It also works as a fault code scanner to read and reset diagnostic trouble codes and reset adaptations. The software program requires a Windows XP/Vista/7/8/10 laptop and the installation and setup are very easy. The OBD tool, cable, and files are shipped to you with simple setup instructions. There is no need to remove your ECU and ship it. You can have your M5 flashed in under an hour from the convenience of your garage or driveway!

     

    Minimum Octane

    (click to expand)

    You can choose between 91 or 93. We have developed tuning for the standard 'high octane' premium fuel found around the country (91 is the maximum available in some areas). Our power and torque gains are advertised with 93. The 91 octane version will have less timing and slightly less horsepower gains.

     

    Rev Limit

    (click to expand)

    We have two rev limit options: stock 8,250 and raised 8,500. Having a higher rev limit lets you stay in gear longer and avoid an untimely upshift. Higher rev limits should only be used for brief moments and never for sustained running. Additional engine maintenance, with frequent oil changes and oil analysis, is strongly recommended.


    Base File Update

    (click to expand)

    Our performance software is built around a specific version of stock software that BMW released as an update. It includes a number of significant changes over older versions for driveability and torque management. The M5 update was such a big step forward that it's considered an upgrade all on its own. No worry if you don't have it - we will provide you with a free update before the Turner performance software is installed

     

    This item fits the following BMWs: 
    2006-2010 E60 M5 sedan 
    2006-2010 E63 M6 coupe , E64 M6 cabrio

    Part #: E60-M5-SOFTWARE-
    Price: $719.10 (USD) 
    $799 (Sale - Save 10%)
    Free Shipping Free Shipping
    O2 Sensor Bung and Plug Made in the USA O2 Sensor Bung and plug. This weld-in bung allows an O2 sensor to be screwed into your exhaust system. It's required for custom exhaust systems, and is also useful for air/fuel ratio measurements when dyno testing. A threaded plug is included to cap off when not in use. Bung and cap/plug are both 100% stainless steel. The bung and plug are also available separately (in case you don't need both). Simply choose your option below.
      TMS Oxygen Sensor Bung Specs:
    1. Material 304 stainless steel
    2. 1.00" / 25.4mm OD
    3. 0.50" / 12.7mm Tall
    4. Thread size and pitch M18x1.5
      TMS O2 Sensor Plug & Crush Ring Specs
    1. Material 304 stainless steel
    2. 10mm female hex for install and removal
    3. Thread size and pitch M18x1.5
    4. Copper Crush Ring for leak free installation
       Install Tips
    • Locate bung as close to engine a possible, without exceeding the maximum operating temperature for the O2 sensor. The suggested location is just down-stream of the merge-collector on each bank of cylinders.
    • Sensors located after upstream exhaust system leaks or too close to exhaust outlets are susceptible to poor readings or influence of ambient air
    • O2 Sensors exposed to exhaust gasses with too high amount of un-burnt fuel can lead to misleading readings. A possible lean reading.
    • Locate sensor/bung 90° to exhaust gas stream.
    • Locate sensor/bung in tube with a minimum of 10° up angel to prevent liquid build up in sensor element.
    • Use stainless steel welding wire or rod when installing bung.
    • Do not have bung plug or a oxygen sensor installed when welding bung in place.
    • Welding can distort the bung so it is recommended you chase/tap the threads of the bung after welding.
    • When installing O2 sensor or plug, use an O2 sensor compatible high temperature resistant grease on the threads.
    • Use tightening torque suggested by O2 senor manufacturer.
    Part #: TEN9949O2S
    Price: $5.10 (USD) 
    $6 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Mega-Stuffed Backpack Gift Package Our favorite 2016 BMW gift ideas, conveniently bundled in our new backpack. Can't decide which Turner Motorsport works best? Get them all and save $137! This makes a great package for one or more Bimmer fans in your family.

    Our "Mega Stuffed Backpack" package includes:
    + $200 Turner Gift Certificate
    + Turner OGIO backpack
    + Turner Pint Glass
    + Turner Keychain
    + Turner Flexfit Baseball Cap
    + Turner Knit Cap
    + Turner 1/4 Zip Pullover
    + "Adrenalin" BMW Motorsport DVD
    + Minichamps Turner Z4 1/43 model
    + Turner Motorsport Sticker Sheet

    Choose a hat option and pullover size from the options below.
    Part #: GP155
    Price: $348.03 (USD) 
    $360.01 (Sale - Save 3%)
    Turner Motorsport Hooded Sweatshirt (Hoodie) Hoodies are here! Stay warm with our official TMS pullover hooded sweatshirt. Warm, thick, and comfy -- without being bulky. Features the Turner Motorsport logo across the chest and your choice of TMS car number on the back. Show your support for either the #95 car (Turner/Salama/Seldorf), #96 (Auberlen/Bell) or #97 (Hand/Gleason).

    These are Hanes Ultimate Cotton, constructed with a heavyweight 10.1 oz. patented 90/10 cotton/polyester blend that is shrink resistant (it's still normal for these to shrink up to a half-size once they've been washed/dried a couple times). Complete with hood drawstrings, spandex trim in cuffs and waistband. Select your size below.
    Part #: TMSHOODIE
    Price: $33.96 (USD) 
    $39.95 (Sale - Save 15%)
    Free Shipping Free Shipping
    on orders $199 and up
    Turner Motorsport Z4 Racecar 2014 GTD Champions T-Shirt - Black Celebrate our 2014 GTD Championship with the Z4 GTD race car. The Turner Motorsport BMW Z4 GTD won 4 races, and had 6 podiums and 10 top-ten finishes in the TUDOR United SportsCar Championship. This high quality 100% cotton black t-shirt features the Turner Z4 GTD on the back and Turner logo on the front.

    Get yours today, these are limited in quantity and won't last long. Choose size below.
    Part #: G200-WIN
    Price: $9.95 (USD) 
    $24.95 (Sale - Save 60%)
    Free Shipping Free Shipping
    on orders $199 and up