BMW Seat Belts and Racing Harnesses for BMW 6 Series E64 (2004-2010)

Clear BMW chassis
The advantage of racing harnesses cannot be understated. Aside from the obvious improvement to your safety, harnesses keep your body planted in the seat and allow a much more confident and focused driving experience. Without your body strapped in you're constantly fighting to keep youself planted in the seat and these forces distract you from controlling the car. It also prevents you from getting and maintaining the ideal leverage point for working the steering wheel and pedals. Turner Motorsports offers several harness and seat belt accessories to make the use of harness belts easier.

Schroth Adjusting Grips - 2"
Schroth - Corporate Logo
T#:390773
Part#: SR00092
In Stock
$15.95
$15.95
Schroth harness grips slide into the ends of your Schroth harnesses and give your fingers something to lock onto when tightening the harness. Otherwise, your hand - or glove - has to yank on the end of the strap which might be slippery. Schroth Grips make life easier and pit stops quicker! An accessory that you really can't live without. Sold per harness for both shoulder and both lap belts (4 Grips total). Fits Schroth 2" harnesses only.
Schroth Racing 2 Inch Harness Pads
Schroth - Corporate Logo
T#:390796
Part#: SR-2IN-PADS
In Stock
Starting at $31.95
Starting at $31.95
Cushioned pads that cover the 2" shoulder belts so they don't dig into your shoulders. These pads simply cover the belts and fasten with a zipper. Available in multiple colors with a "Schroth Racing" patch sewn on (flip the pad over if you don't want the logo showing). These can even be used on stock 3-point seatbelts to prevent the belt from rubbing against your neck. Sold as a pair of pads (enough to fit one racing harness).
Racing Seat Belt Harness Retaining Guide Collars (Pair)
Turner Motorsport - Corporate Logo
T#:339005
Part#: TIN9903150
In Stock
Sale - Save 5% $79.90
Starting at $75.90
Free Shipping on orders $99 and up
Sale - Save 5% $79.90
Starting at $75.90
Free Shipping on orders $99 and up
These little guys are one of our favorite final touches on a race car build. After years of requests, we now are able to supply these for more than just our race team's use. These aluminum collars bolt on your roll cage's harness bar (or any bar for that matter) and help keep your seat belt harnesses from sliding on the bar. You can use just one pair to accomplish this, or 2 pairs (4 collars total) for the best looking and functioning install. The beauty of these collars (besides being lightweight and looking clean) is that they can be adjusted from side to side, which is convenient if you change you seat or belt configuration. They can also be used for other applications as well, such as taming that helmet net strap. If you're looking for a clean, professional looking solution, these are a superb final touch. As used on our own Championship winning TMS E46 and E90 race cars.

We offer these guide collars in two sizes: for 1.5" OD roll bar tubing or for 1.75" OD roll bar tubing (choose your size below). Check your cage tubing diameter especially if your car was built in Europe as they used metric tubing sizes. If you need a metric size, contact us. Also measure with paint applied, not bare tubing. These are sold by the pair, so be sure to modifying your quantity below (or in the cart) if you need them for both seats.

BMW Motorsport Seat Belt Shoulder Pad Set
Genuine BMW - Corporate Logo
T#:340352
Part#: MSBELT50MM
In Stock
Sale - Save 26% $99.95
Starting at $73.59
Free Shipping
Sale - Save 26% $99.95
Starting at $73.59
Free Shipping
These original BMW Motorsport shoulder pads fit over any street car seat belt or 2" harness belt. A zippered side makes these super easy to install on any car. High quality "BMW MOTORSPORT" embroidery will set your car apart from the rest. Also available in 76mm (3") harness width. Set includes two shoulder pads.

Sabelt Metric Eyebolt - M10 X 1.51 Thread Length 23 mm, 8.8.
Sabelt - Corporate Logo
T#:559198
Part#: CCMI0023
Direct Ship
$6.00
$6.00

M10 X 1.51

Thread Length - 23 mm

Grade 8.8

Sold Individually

RaceQuip FIA/SFI Approved Camlock Black Racing Harness Set
Racequip - Corporate Logo
T#:403292
Part#: 751001
Direct Ship
$199.95
$199.95

RaceQuip FIA Camlock Harness Sets feature an ultra-lightweight magnesium alloy cam buckle with an activation lever that points downward. The FIA cam buckle utilizes a wide engagement cone for easy snap-in. A 45Es(right or left) unlatch movement prevents accidental opening and precise spring pressure provides a positive feel. All RaceQuip FIA Approved belts are constructed using premium 3aEUR Polyester webbing that is transverse mono filament woven to provide increased strength and smoother edges. Premium aluminum shoulder adjusters come standard on all RaceQuip FIA approved harness sets.

The RaceQuip 751 Series Camlock belt set offers many professional features yet affordable pricing for the grassroots racer. This Camlock belt set comes in a six (6) point configuration with a pull-down lap belt design. The harness sets not only exceed the SFI 16.1 specification, they also pass the stringent FIA 8853/98 standard. This aEURoedual certificationaEUR allows racers in some sanctions (SCCA, NASA, etc.) to use these belts for five years instead of just two.

They start with a super-lightweight 165 gram magnesium alloy cam buckle. The buckle features an engagement cone which allows the belts to snap into the cam mechanism at angles of 21Es left or right and 11Es up and down for ease of engagement. Precise internal spring pressure allows a positive feel on the 45Es (right or left) unlatch movement that reduces the chance of accidental opening.

Next, the forged SAE 4130 steel buckle hardware is sewn onto the premium 3aEUR polyester webbing, called aEURoetransverse mono filament wovenaEUR, which means that there are mono filament fibers inter-woven into the straps in a pattern that transverses the standard weave. This design accomplishes two tasks - added strength and smoother edges on the belts. The harness sets also feature premium, lightweight, non-slip aluminum shoulder adjusters with easy lift grips. The lap belt adjusters utilize an anti-slip tensioner device as well. Heavy-duty forged steel SAE 1050 3" slide bars and 3" bolt on ends come already installed, but they can be easily removed if you prefer to mount your belts by wrapping them around a rollbar or you can change them out to snap-hook ends. Belt adjustment lengths are 20aEUR to 68aEUR for shoulders and 20aEUR to 68aEUR for the lap belt.

Features and Specifications:

  • Lightweight 165 gram Magnesium Alloy Cam Buckle
  • Exceeds Stringent FIA 8853/98 Standard (FIA Tags Affixed)
  • Surpasses SFI 16.1 Rating (SFI Tags Affixed)
  • 6 Point Design - Dual 2" Crotch Strap
  • NOT D.O.T. / FMVSS Certified for On Highway Use
  • Pull Down Lap Belt Adjusters
  • Wide Engagement Cone For Easy Snap In
  • Precise Spring Pressure for a Positive Feel
  • 45Adeg (right or left) Unlatch Movement Mitigates Accidental Opening
  • Cam Buckle Stays Affixed to the Right Lap Belt
  • Heavy-Duty Drop-Forged Steel Hardware Ends Installed (no bolts)
  • Wrap Around or Bolt-in Mounting
  • Premium 3aEUR Polyester Webbing
  • Transverse Mono Filament Woven for Increased Strength and Smoother Edges
  • Premium Aluminum Shoulder Adjusters
  • Shoulder Belt Adjustment Length is 20" to 68"
  • Lap Belt is Adjustable from 20" to 68"
  • Can Be Re-Webbed (SFI Cert.) Upon Expiration
  • Available in Black Only

RaceQuip Sportsman 5-Point and 6-Point Camlock Racing Harnesses - SFI 16.1 Approved
Racequip - Corporate Logo
T#:403272
Part#: RQSPCAMLOCK
Direct Ship
Starting at $139.95
Starting at $139.95

Racing harnesses are required at any respectable track or strip, but they tend to run upwards of hundreds of dollars. RaceQuip designs and builds safety equipment for just this issue! Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

RaceQuip Sportsman Camlock Harness Sets feature a durable aluminum cam buckle with an activation lever that points downward. The Sportsman cam utilizes a 45Es(right or left) unlatch movement to prevent accidental opening and the precise spring pressure provides a positive feel.

All harness systems are constructed using drop-forged steel hardware for ultimate strength and reduced weight. All hardware is cadmium plated for added protection. They use only 3" (2" for HNR) premium polyester webbing for strength. Belts and hardware are routinely tested to verify compliance with SFI 16.1 standards.

Features and Specifications:

  • Lightweight Aluminum Alloy Cam Buckle
  • Exceeds SFI 16.1 Rating (SFI Tags Affixed)
  • NOT D.O.T. / FMVSS Certified for on Highway Use
  • 5 Point Design - Single 2" Crotch Strap
  • 6 Point Design - Dual 2" Crotch Strap
  • Pull Down or Up Lap Belt Adjusters Available
  • Wide Engagement Cone For Easy Snap In
  • Precise Spring Pressure for a Positive Feel
  • 45Adeg (right or left) Unlatch Movement Mitigates Accidental Opening
  • Cam Buckle Stays Affixed to Right Side Lap Belt
  • Heavy-Duty Drop-Forged 3" Steel Hardware Ends Installed (no bolts)
  • Wrap Around or Bolt-in Mounting
  • Premium 3aEUR Polyester Webbing
  • Transverse Mono Filament Woven for Increased Strength and Smoother Edges
  • Shoulder Belt Adjustment Length is 25" to 72"
  • Lap Belt is Adjustable from 30" to 70"
  • Can Be Re-Webbed (SFI Cert.) Upon Expiration
  • Available in Black, Red, and Blue
Schroth Rallye 4 Harness
Schroth Rallye 4 Harness
Rallye harnesses are not Left/Right specific
Schroth - Corporate Logo
T#:391750
Part#: SR1610
Direct Ship
Starting at $189.95
Starting at $189.95

There are many benefits to installing harnesses in your BMW -

  • maintain a proper driving position
  • keep you planted in the seat and not bracing with your left leg or shoulder
  • lower lap times thanks to improved driver confidence
  • advanced technology is safer than standard 3-point belts

It's hard to put into words just how effective harnesses are in improving your driving experience. In addition to the obvious safety benefits, harnesses make you a better driver by removing distractions so your hands and feet are used for car control instead of bracing against a door panel or dead pedal. Everyone with harnesses will agree: they are a must-have upgrade to your driving experience and they wish they had installed them sooner.

The Rallye harnesses are Schroth's universal fit, bolt-in harness design that still meets DOT and TUV specs. The Rallye 4 harness fits most BMWs better than a Rallye 3 type thanks to its four mounting points that bolt to four existing anchor points in the BMW chassis: outboard lap belt anchor on B-pillar, inboard lap belt anchor on seat, and both rear seat belt anchors. The Rallye harnesses are a fixed, semi-permanent install but a quick-connect buckle is included in the rear seat harness so that the front and rear sections can be separated and tucked away when not in use. This also allows you to use the stock 3-point seatbelts in the front and rear seats without obstruction. All Schroth harnesses feature their asm technology that prevents your body from sliding under the lap belt and redces head and chest deceleration forces. Rallye belts are not side-specific; they fit either the Left or Right side of the vehicle.

Optional: Schroth Grips. Schroth harness grips slide into the ends of your Schroth harnesses and give your fingers something to lock onto when tightening the harness. Otherwise, your hand - or glove - has to yank on the end of the strap which might be slippery. Sold per harness for both shoulder and both lap belts (4 Grips total).

Seat Compatability: Schroth approves this harness only for stock seats or seats that have passed independent crash testing. The seat design must have a separate headrest and backrest. Single piece headrest and backrest (e.g. - F8X M3/M4 seats, Porsche 911 seats) are not approved because the shoulder straps fall to the sides and will not secure the driver properly. Observe all guidelines and instructions for installation and fitment.

E36 Fitment Note: a special bolt is required for installation on the stock E36 seat. Make sure you order this bolt for any E36 installations. Click here for the link to the bolt.

Rallye 4 Harness Summary:

  • Suggested Use: autocross, daily driver
  • Shoulder Belt: 2" pull down
  • Lap Belt: 2" pull down
  • Buckle: Rallye push button
  • Installation: permanent bolt-in
  • Seat Compatability: approved only for stock seats with headrest separated from backrest
  • HANS compatible? No.

When using any racing harness in any environment - even normal street use - adhere to this advice: "all the way tight, all of the time". Never loosen or slacken the belts for comfort or convenience! A loose racing harness will not protect you.


RaceQuip 7/16-20 Long Eyebolt, Nut & Washer Harness Mount Hardware
Racequip - Corporate Logo
T#:403229
Part#: 700060
Direct Ship
$7.95
$7.95

RaceQuip recommends using their superior hardware and mounting options for alternative mounting methods to ensure that the hardware will hold up to the demands in an accident. All of there hardware and brackets are constructed from drop-forged steel and are cadmium plated for strength and corrosion resistance.

This eyelet bolt attaches the harness bracket to the vehicle by being secured to the body or floor of the vehicle.


RaceQuip 5 Point Latch And Link HANS/HNR Racing Harness - SFI 16.1 Approved
Racequip - Corporate Logo
T#:403240
Part#: RQ5PTHANSHNR
Direct Ship
Starting at $89.95
Starting at $89.95

Racing harnesses are required at any respectable track or strip, but they tend to run upwards of hundreds of dollars. RaceQuip designs and builds safety equipment for just this issue! Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

The HANS/HNR harness set has narrow shoulder belts to better fit a head & neck restraint (HNR) like a HANS device.

All harness systems are constructed using drop-forged steel hardware for ultimate strength and reduced weight. All hardware is cadmium plated for added protection. They use only 3" premium polyester webbing and all belts are box-x pattern sewn to ensure uniform stitch length and strength. Belts and hardware are routinely tested to verify compliance with SFI 16.1 standards.

All of their harness sets feature a latch & link system to retain the belts. The latch & link system is distinguished by a pivoting "hammer," called a Duckbill, which locks all of the belts into place by snapping down into a detent. Both shoulder belts and the sub belt are hooked over the link; the link is inserted into the latch; the Duckbill is then brought down into and over the link, securely holding all of the pieces in place.

RaceQuip Latch & Link Harness Systems come as a "pull down" design. This means that the lap belts must be pulled down and away from the center latch mechanism to tighten. Since their belts are "double adjustable", lengths are easily adjusted on either end for ease of installation. Using the included three bar slide you can mount the belts by either wrapping them around a rollbar or by bolting them in place. Snap-in ends and eyebolts are sold separately if you want to install your belts in that manner.

Features and Specifications:

  • Exceeds SFI 16.1 Rating (SFI Tags Affixed)
  • NOT D.O.T. / FMVSS Certified for On Highway Use
  • Premium 3" Polyester Webbing
  • Twin Individual Shoulder Belts
  • 2" Shoulder Accomodates HNR / HANS Device
  • Pull Down Style Lap Belt
  • 5 Point Design - Single 2" Crotch Sub Strap
  • Hardware Ends Installed
  • Double Adjustable for Ease of Installation
  • Wrap Around or Bolt-in Mounting
  • Drop-Forged Steel Hardware (no bolts)
  • Shoulders Adjust from 20" to 62"
  • Lap Belt Adjusts 20" to 60"
  • Available in Black, Red, and Blue
  • Can Be Re-webbed (SFI) Upon Expiration
Sabelt ECE Approved 3-Point Clubman Belt
Sabelt - Corporate Logo
T#:552835
Part#: SACB5
Direct Ship
Starting at $160.00
Starting at $160.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Features:

  • 3 fixing points
  • Shoulder straps: 2" with steel adjusters
  • Lap belts: 2" with steel adjusters and clubman style buckle
Sabelt FIA Approved 6-Point Saloon Rally Racing Harness
Sabelt - Corporate Logo
T#:552658
Part#: SAFIACCA3
Direct Ship
Starting at $460.00
Starting at $460.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Sabelt FIA approved racing harnesses are designed in a variety of configurations to suit your exact need and vehicle. Found in some of the fastest competition vehicles in the world, you can rest assured that you're being held securely by some of the finest belts available. Made by hand in Italy, quality and consistency are second to none. Whether you choose a four or six point, with aluminum or steel hardware each belt is designed to hold up to the rigors of the racetrack and to perform flawlessly in the event of a collision.

Features:

  • Shoulder straps: full 3aEURtmaEURtm width - aluminum lightweight adjuster
  • Shoulder fixing: snap hook - tribar
  • Lap belts: full 3aEURtmaEURtm width - aluminum lightweight adjuster Pull Up-snap hook fixing
  • New compact buckle designed with crotches slots integrated to main body
  • Crotch straps: 2aEURtmaEURtm width - snap hook / tribar fixing


Sabelt FIA Approved 6-Point GT Saloon Racing Harness
Sabelt - Corporate Logo
T#:552645
Part#: SAFIACCA1
Direct Ship
Starting at $495.00
Starting at $495.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Sabelt FIA approved racing harnesses are designed in a variety of configurations to suit your exact need and vehicle. Found in some of the fastest competition vehicles in the world, you can rest assured that you're being held securely by some of the finest belts available. Made by hand in Italy, quality and consistency are second to none. Whether you choose a four or six point, with aluminum or steel hardware each belt is designed to hold up to the rigors of the racetrack and to perform flawlessly in the event of a collision.

Features:

  • Shoulder straps: full 2aEURtmaEURtm width - aluminum lightweight adjuster
  • Shoulder fixing: snap hook - tribar
  • Lap belts: full 2aEURtmaEURtm width - lightweight carabinas
  • Lap belts: 2aEURtmaEURtm quick adjuster integrated to buckle tongue - Pull Down. Designed for GT/ Endurance
  • New compact buckle designed with crotches slots integrated to main body
  • Crotch straps: 2aEURtmaEURtm width - snap hook / tribar fixing
  • Yellow loops
  • Velcros on shoulders
  • Intercom wire fixing
Sabelt ECE Approved 3-Point Clubman Belt
Sabelt - Corporate Logo
T#:552836
Part#: SACB6
Direct Ship
Starting at $135.00
Starting at $135.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Features:

  • 3 fixing points
  • Shoulder straps: 2" with steel adjusters
  • Lap belts: 2" with steel adjusters and clubman style buckle
Sabelt ECE Approved 4-Point Clubman Belt
Sabelt - Corporate Logo
T#:552830
Part#: SACB1
Direct Ship
Starting at $145.00
Starting at $145.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Features:

  • 4 fixing points
  • Shoulder straps: 2" with steel adjusters
  • Lap belts: 2" with steel adjusters and clubman style buckle
  • Shoulder pads included

Sabelt FIA Approved 4-Point Saloon Racing Harness
Sabelt - Corporate Logo
T#:552669
Part#: SAFIACCS4
Direct Ship
Starting at $260.00
Starting at $260.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Sabelt FIA approved racing harnesses are designed in a variety of configurations to suit your exact need and vehicle. Found in some of the fastest competition vehicles in the world, you can rest assured that you're being held securely by some of the finest belts available. Made by hand in Italy, quality and consistency are second to none. Whether you choose a four or six point, with aluminum or steel hardware each belt is designed to hold up to the rigors of the racetrack and to perform flawlessly in the event of a collision.

Features:

  • Shoulder straps: full 3aEURtmaEURtm width - steel adjuster
  • Shoulder fixing: snap hook - tribar
  • Lap belts: full 3aEURtmaEURtm width aEUR" steel adjuster Pull Up - snap hook fixing
  • Buckle fixed to lap belt

Sabelt FIA Approved 6-Point Saloon Rally Racing Harness
Sabelt - Corporate Logo
T#:552831
Part#: SAFIACCS3
Direct Ship
Starting at $295.00
Starting at $295.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Sabelt FIA approved racing harnesses are designed in a variety of configurations to suit your exact need and vehicle. Found in some of the fastest competition vehicles in the world, you can rest assured that you're being held securely by some of the finest belts available. Made by hand in Italy, quality and consistency are second to none. Whether you choose a four or six point, with aluminum or steel hardware each belt is designed to hold up to the rigors of the racetrack and to perform flawlessly in the event of a collision.

Features:

  • Shoulder straps: full 3aEURtmaEURtm width - aluminum lightweight adjuster
  • Shoulder fixing: snap hook - tribar
  • Lap belts: full 3aEURtmaEURtm width - aluminum lightweight adjuster Pull Up-snap hook fixing
  • New compact buckle designed with crotches slots integrated to main body
  • Crotch straps: 2aEURtmaEURtm width - snap hook / tribar fixing
Sabelt FIA Approved 6-Point Formula Style Racing Harness
Sabelt - Corporate Logo
T#:552659
Part#: SAFIACCA4
Direct Ship
Starting at $395.00