Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

E64 D Force Flow Formed Alloy Wheels

E64 D Force Flow Formed Alloy Wheels D-Force Wheels has been one of the leading innovators in flow-formed alloy wheels for the BMW market. These wheels use a special manufacturing process that is a cross between forging and casting. Flow-forming is a process that results in a stronger wheel than the traditional casting process and less weight than a traditional forged wheel. Many high-quality and OEM wheel manufacturers are moving to this flow forming process. D-Force first gained credibility and fame with BMW CCA Club Racers throughout North America. A light weight, strong, and affordable race wheel proved to be a winning combination. D-Force Wheels are available in two distinct styles: LTW5 - light weight 5-spoke in 17" and 18" sizes and EmPower - light weight multi-spoke 'mesh' style wheel in an 18" size. For wheel information in general, check out our Wheel Tech Guide by clicking here.

LTW5 EmPower
You're currently viewing parts for your (E64) 6-Series Convertible 2004-2010. Reset your chassis
For accurate results, specify your model below.
D-Force EmPower 18x8.5
Wheel Specs
Fitment:Front / Rear
Size:18x8.5"
Offset (mm):15
Weight (lbs):19
Profile:Wide Lip

These mesh wheels come from the same manufacturer of the popular LTW5 wheels. Which means they are some of the strongest and lightest wheels you can find for your BMW. They also look amazing with the mesh "Y-spoke" design and polished outer lip blending with your BMW for a classis appearance. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. EmPower wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The EmPower uses the classic mesh pattern found on so many other German wheels and are a natural complement to BMW's heritage and styling cues. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels with the low offsets are a direct fit to BMW E39 5-series that use the 5/120 bolt pattern with a 74.1mm center bore. It can also fit other 5/6/7-series models when used with a wheel centering ring. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. If you'd like more input on wheel fitment give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
D-Force Wheels
Part #: TMS184588
Price: $319.95 (USD) 
Direct Ship
Quantity:   
D-Force EmPower 18x8.5
Wheel Specs
Fitment:Front / Rear
Size:18x8.5"
Offset (mm):15
Weight (lbs):19
Profile:Wide Lip

These mesh wheels come from the same manufacturer of the popular LTW5 wheels. Which means they are some of the strongest and lightest wheels you can find for your BMW. They also look amazing with the mesh "Y-spoke" design and polished outer lip blending with your BMW for a classis appearance. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. EmPower wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The EmPower uses the classic mesh pattern found on so many other German wheels and are a natural complement to BMW's heritage and styling cues. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels with the low offsets are a direct fit to BMW E39 5-series that use the 5/120 bolt pattern with a 74.1mm center bore. It can also fit other 5/6/7-series models when used with a wheel centering ring. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. If you'd like more input on wheel fitment give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
D-Force Wheels
Part #: TMS184589
Price: $319.95 (USD) 
Direct Ship
Quantity: