Track Safety for BMW X Series E71 (2008-2014)

Clear BMW chassis
If you're like us, then you enjoy taking your vehicle to the track whenever you get a chance. Whether you have a fully built track slayer or if you just enjoy taking your daily driver to autocross events, Turner Motorsport carries what you need to pass tech and, more importantly, keep yourself safe in the event of an accident.

Sub-Categories

Sort By:

Schroth Racing 2 Inch Harness Pads
Schroth - Corporate Logo
T#:390796
Part#: SR-2IN-PADS
Expected Ship Date: Jun 22, 2021
Starting at $36.95
Starting at $36.95
Cushioned pads that cover the 2" shoulder belts so they don't dig into your shoulders. These pads simply cover the belts and fasten with a zipper. Available in multiple colors with a "Schroth Racing" patch sewn on (flip the pad over if you don't want the logo showing). These can even be used on stock 3-point seatbelts to prevent the belt from rubbing against your neck. Sold as a pair of pads (enough to fit one racing harness).
Show More Show Less
Element E100 Fire Extinguisher - BMW MINI & More!
Element - Corporate Logo
T#:1135785
Part#: ELE-E100
Expected Ship Date: Jun 21, 2021
New Item
$119.95
$119.95
Need a fire extinguisher for your home or garage? We recommend Element's popular E50 or E100 Fire extinguishers! Element's E100 fire extinguisher is compact and easy to use while offering fire fighting protection almost 10 times longer than a standard 5lb fire extinguisher bottle! Helping you put out the fire before it spreads all without making a mess or leaving behind any toxic or corrosive residue. Element's industrial-sized model, the E100 Fire Extinguisher, offers 100 seconds of fire fighting protection and is recommended for industrial use. The E100's small and lightweight construction allows for storage almost anywhere. Internationally tested and certified. Features: 100 SECOND DISCHARGE Almost 10x longer than a 5lb fire extinguisher bottle COMPACT & EASY TO USE 33cm (13") tall, 3.2cm (1.2") body diameter / 4cm (1.6") handle diameter, 360 grams (0.79lbs) weight MAKES NO MESS / LEAVES NO RESIDUE & ECO-FRIENDLY No mess, non-toxic, non-corrosive, environmentally friendly ZERO PRESSURE DISCHARGE Will not spread oil & liquid fires SAFE & MAINTENANCE-FREE No moving parts or compressed gas to ever service WEATHERPROOF and unaffected by extreme temperature, humidity, or vibration. Safe to store in wet environments. Element extinguishers can safely be stored in vehicles that live in hot climates MADE IN ITALY FIGHTS ALL MAJOR FIRE CLASSES: A, B, C, & K (cooking oil/grease) INCLUDING COOKING OIL & GREASE FIRES Includes: E100 extinguisher with high visibility striker and cap One (1) Mounting clip included
Show More Show Less
Schroth Rallye 4 Harness
Schroth Rallye 4 Harness
Rallye harnesses are not Left/Right specific
Schroth - Corporate Logo
T#:391750
Part#: SR1610
Expected Ship Date: Jun 22, 2021
Starting at $189.95
Starting at $189.95

There are many benefits to installing harnesses in your BMW -

  • maintain a proper driving position
  • keep you planted in the seat and not bracing with your left leg or shoulder
  • lower lap times thanks to improved driver confidence
  • advanced technology is safer than standard 3-point belts

It's hard to put into words just how effective harnesses are in improving your driving experience. In addition to the obvious safety benefits, harnesses make you a better driver by removing distractions so your hands and feet are used for car control instead of bracing against a door panel or dead pedal. Everyone with harnesses will agree: they are a must-have upgrade to your driving experience and they wish they had installed them sooner.

The Rallye harnesses are Schroth's universal fit, bolt-in harness design that still meets DOT and TUV specs. The Rallye 4 harness fits most BMWs better than a Rallye 3 type thanks to its four mounting points that bolt to four existing anchor points in the BMW chassis: outboard lap belt anchor on B-pillar, inboard lap belt anchor on seat, and both rear seat belt anchors. The Rallye harnesses are a fixed, semi-permanent install but a quick-connect buckle is included in the rear seat harness so that the front and rear sections can be separated and tucked away when not in use. This also allows you to use the stock 3-point seatbelts in the front and rear seats without obstruction. All Schroth harnesses feature their asm technology that prevents your body from sliding under the lap belt and redces head and chest deceleration forces. Rallye belts are not side-specific; they fit either the Left or Right side of the vehicle.

Optional: Schroth Grips. Schroth harness grips slide into the ends of your Schroth harnesses and give your fingers something to lock onto when tightening the harness. Otherwise, your hand - or glove - has to yank on the end of the strap which might be slippery. Sold per harness for both shoulder and both lap belts (4 Grips total).

Seat Compatability: Schroth approves this harness only for stock seats or seats that have passed independent crash testing. The seat design must have a separate headrest and backrest. Single piece headrest and backrest (e.g. - F8X M3/M4 seats, Porsche 911 seats) are not approved because the shoulder straps fall to the sides and will not secure the driver properly. Observe all guidelines and instructions for installation and fitment.

E36 Fitment Note: a special bolt is required for installation on the stock E36 seat. Make sure you order this bolt for any E36 installations. Click here for the link to the bolt.

Rallye 4 Harness Summary:

  • Suggested Use:  autocross, daily driver
  • Shoulder Belt:  2" pull down
  • Lap Belt:  2" pull down
  • Buckle:  Rallye push button
  • Installation:  permanent bolt-in
  • Seat Compatability:  approved only for stock seats with headrest separated from backrest
  • HANS compatible?  No.

 

When using any racing harness in any environment - even normal street use - adhere to this advice: "all the way tight, all of the time". Never loosen or slacken the belts for comfort or convenience! A loose racing harness will not protect you.

Show More Show Less

Rennline Billet Roll Cage Hook - 2 Inch
Rennline - Corporate Logo
T#:587061
Part#: FE23.44-2IN
Expected Ship Date: Jul 12, 2021
$50.00
$50.00
Looking for a place to hang your hat? How about your steering wheel or helmet? Rennline has the solution, with this billet roll cage mounted hook. Fully CNC machined and anodized, these hooks come with all necessary hardware for a quick and easy installation. Includes billet hook, and 1 grab handle along with all necessary hardware.
Show More Show Less

Rennline Battery Disconnect Switch - 2 Terminal W/ Removable Key
Rennline - Corporate Logo
T#:557143
Part#: EL-LA45758
Inventory On Order, ETA Jun 21, 2021
$27.95
$27.95
Quickly disconnect your battery in an emergency to kill the power to your car and prevent further possible issues such as fire and electrical damage. This 2 terminal switch features a removable key that is bright red for easy location.
Show More Show Less
Element Roll Bar Extinguisher Mount - Hi-Vis Red - BMW MINI & More
Element - Corporate Logo
T#:1135786
Part#: ELE-MNT-ROL
Expected Ship Date: Jun 21, 2021
New Item
$59.00
$59.00
For vehicles with a factory or aftermarket roll bar, Element offers a secure way to fit an E50. Made from laser-cut and CNC bent metal, each bracket is powder coated in high visibility red. The bracket is held in place with 2 included band clamps and an additional Velcro security strap (not pictured) is included. Features: Universal design fits most roll cage tube sizes Laser-cut and CNC bent for precision Powder-coated for durability in high visibility red Perfect for race cars, off-road vehicles, ATV's, or any vehicle with a roll bar Perfectly fits E50 (not included) Made in Canada Compact and lightweight design Includes: Factory assembled mount with dual mounting clips (Mount only. Element extinguisher sold separately) Velcro security strap Stainless band clamps
Show More Show Less

Rennline Billet Roll Cage Hook - 1.5 Inch
Rennline - Corporate Logo
T#:587058
Part#: FE23.44-1.5IN
Expected Ship Date: Jul 12, 2021
$50.00
$50.00
Looking for a place to hang your hat? How about your steering wheel or helmet? Rennline has the solution, with this billet roll cage mounted hook. Fully CNC machined and anodized, these hooks come with all necessary hardware for a quick and easy installation. Includes billet hook, and 1 grab handle along with all necessary hardware.
Show More Show Less
Sabelt FIA Approved 4-Point Saloon Racing Harness
Sabelt - Corporate Logo
T#:552669
Part#: SAFIACCS4
Expected Ship Date: Jul 13, 2021
Starting at $260.00