Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW E82 Water Pumps

BMW E82 Water Pumps When maintained, your BMW's cooling system should be bulletproof. The weakest link on any BMW model is likely to be the water pump, thermostat, or electrical parts on the newer models. BMW water pumps have gone through many design and material changes over the years in an effort to make the cooling system more efficient and reduce parasitic drag on the engine. The water pumps we sell are the latest and best designs that BMW and OEM suppliers can produce. Whenever possible we prefer to sell a water pump with a composite impeller, not metal. The latest BMW designs use a composite impeller that is far lighter than metal and much stronger than plastic. Metal impeller pumps are typically heavier and may have bearing problems that lead to premature leaks. Plastic pumps were infamous in the mid-1990s for disintegrating. The composite impellers have proven themselves for over a decade as a trouble-free and efficient design and many of the OEM suppliers are also introducing updated composite designs for older models too.
You're currently viewing parts for your (E82) 1-series Coupe 2008+. Reset your chassis
For accurate results, specify your model below.
Aluminum Screws for N52 N54 Water Pump These aluminum water pump screws are single use and must be replaced each time they are removed. These are used on all 325i, 328i, and 330i with the BMW N51 N52 and N53 engines. They were also used on some early N54 engines that have rubber mounts on the water pump housing. Do not use these bolts if your N54 water pump has been replaced with a housing that does not have the rubber mounts.

In German, Rein means Pure. In the automotive industry the Rein name has quickly come to represent quality. With fitments for some of the world’s finest automobiles including BMW and Mini and guaranteed OE quality, Rein is a name you can trust.

This item fits the following BMWs:
2008+ E82 BMW 128i 135i
2007+ E9X BMW 325i 325xi 328i 328xi 330i 335i 335xi
2006+ E60 BMW 525i 525xi 528i 528xi 530i 530xi 535i 535xi
2006+ X3 BMW X3 3.0i X3 3.0si
2006+ Z4 BMW Z4 3.0i Z4 3.0si
Rein
Part #: 11510392553
Price: $6.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Water Pump and Thermostat Package - N51/N52 Engine - E82 128i, E9X 325i/328i/330i, E60 528i This packages covers the major components you would install along with a new water pump or thermostat. On the N51/N52 cars (128i, 325i 328i, 330i, 525i, 528i, 530i) the water pump and theremostat are mounted together. In fact, to get to the thermostat, BMW expects you to remove the water pump. This package covers the whole job. With the electric water pump now an integral part of the efficiency and performance of the engine, staying on top of its maintenance and replacement is the smart thing to do.

Our water pump/thermostat overhaul includes:
  • OEM electric water pump, p/n 11517586925.
  • aluminum mounting screws for water pump (set of 3), p/n 11510392553
  • OEM Behr thermostat, p/n 11537549476
  • Original BMW connecting hose from thermostat to water pump, p/n 11537521049
  • OEM-style hose clamps for hose (x 2)
    BUY AS A PACKAGE AND SAVE $$!

    The water pump on the N52 engine has more cooling responsibilities than ever before. Not only must it provide cooling for the engine, but it's also pumping fluid used to cool the automatic transmission oil. The good news is that the pump only works when, and only as much, as it needs to. The engine computer dictates how much fluid needs to be pumped through the system depending on the load. That means the system can actually stop the pump when warmer temperatures are needed. No longer is the pump spinning all the time from an engine-driven belt. The bad news is that it's now an electrical part, so a failure is usually immediate and with no warning. And if the electronics are at fault, there is no way to rebuild or repair it. Fortunately, the engine computer will force a shut down or reduce power if a problem occurs, preventing catastrophic engine damage.

    How to avoid a water pump failure in the future? Replacing the water pump as part of a regular interval schedule will ensure you always have a functioning pump in place. Since this technology is relatively new for BMW, therefore the lifecycle of the pump isn't yet known, we have been recommending replacement every 80-100k miles. This package of OE/OEM parts covers everything with Original BMW coolant offered to finish off the job. A proper bleeding procedure must be followed with the new electric pump.

    This water pump package fits the following BMWs with the N51/N52 engine:
    2008-2013 E82 BMW 128i
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
    2007-2013 E93 BMW 328i - Convertible
    2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive
    2006-2010 E83 BMW X3 3.0i X3 3.0si
    2006-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
    2009+ Z4 BMW Z4 sDrive30i
    2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
  • Packaged by Turner
    Part #: TMS206099
    Price: $366.28 (USD) 
    $385.56 (Sale - Save 5%)
    Direct Ship
    Free Shipping Free Shipping
    OEM Pierburg Water Pump - 128i, 325i/328i/330i, 525i/528i/530i, X3, X5, Z4 3.0 (N51 N52 Engine)

    Don't take your car's cooling system for granted. A waterpump failure can cost you an engine, which is why preventatively replacing your BMWs waterpump and refreshing the cooling system every 60,000 miles. The water pump is a weak point is the cooling system. Replacing your waterpump will go a long way for keeping your car on the road and operating properly. This water pump fits many 2006 and newer BMW 6 cylinder engines, specifically all the BMWs with the N51, N52, N53 engines. You will also need to purchase replacement aluminum screws Part #11510392553 

    Pierburg pumps are some of the most trusted and widely used on the market. From fuel, water, air and vacuum Pierburg has you covered with OE quality and reliable performance year after year.

    This water pump fits the following BMWs:
    2008-20xx E82 128i
    2006-2006 E90 325i sedan, 330i sedan, 325xi sedan, 330xi sedan
    2007-2012 E90 328i sedan, 328xi sedan, 328i xDrive sedan
    2007-2012 E92 328i coupe, 328xi coupe, 328i xDrive coupe
    2007-2012 E93 328i Convertible
    2006-2006 E60 525i, 525xi, 530i, 530xi
    2007-2010 E60 528i, 528xi, 528i xDrive
    2007-2010 E83 X3 3.0i X3 3.0si
    2007-20xx E70 X5 3.0si X5 xDrive30i 
    2006-2008 E85 Z4 3.0si
    2009-20xx E89 Z4 sDrive30i

    Pierburg
    Part #: 11517586925
    Price: $284.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    OEM VDO Water Pump -- BMW N54 N55

    Water pumps are a critical component of your cooling system. A failed water pump will stop the flow of coolant in your vehicle, leading to overheating and eventual engine damage. Replace your faulty or aging water pump with a high quality OEM VDO unit.

    OEM replacement for BMW part # 11517632426 and 11517563659.

    OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    For vehicles with the N54 or N55 3.0L engine.

    VDO
    Part #: 11517632426
    Price: $374.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Water Pump - N54/N55 Engine - E82 135i, E9X 335i/xi, E60 535i/xi, E70 X5 35ix The N54/N55's water pump is central to the car's cooling system as well as to the performance and fuel economy. BMW's engine efficiency design for these cars includes the water pump for balancing engine power output and efficiency and cooling responsibilities not only for the engine but also for the turbo(s) and transmission cooling. It's a very integral part of the engine. The N54/N55 engined cars already suffer from reduced cooling area because of the factory intercooler, tight space under the hood, and of course heat from the turbo(s). BMW addressed these challenges a number of ways, including a dynamic, 'smart' electric water pump with increased output compared to the N52. The cooling demands mean additional stress on the major cooling components, especially the water pump.

    The N54/N55 water pump is electrically driven and varies output based on instructions from the engine computer. Under the best circumstances the pump drives only as much coolant as needed and will shut down or activate as load and performance demands change (combustion chamber temperatures are dynamically changed based on economy, normal, and performance demands). The pump can also run when the car is off to reduce heat soak in the engine and turbo(s). The water pump is now a factor in how much power and fuel economy your car is producing, making it all the more critical to replace during normal maintenance. If a fault or excessive temperature is reached, the dash cluster will display a yellow or red water temp icon depending on the severity of the condition. The car's electronics will begin shutting down various systems in the car to divert more resources to the cooling system. This can include reducing power output and activating 'limp mode'.

    The best way to avoid problems and system failures? Preventative maintenance and overhaul of the cooling system, starting with the water pump (and thermostat).

    This OEM VDO water pump is the latest design and replaces part number 11 51 7 563 659 (11517563659). It fits all cars with the N54 or N55 engine. Replacement of the aluminum mounting screws is required when changing the water pump (select from the options below). Proper bleeding procedures specific to the electric water pump should also be followed.

    This item fits the following BMWs:
    2008+ E82 BMW 135i 1M Coupe
    2007+ E90 BMW 335i 335xi 335i xDrive - Sedan
    2007+ E92 BMW 335i 335is 335xi 335i xDrive - Coupe
    2007+ E93 BMW 335i - Convertible
    2007-2010 E60 BMW 535i 535xi 535i xDrive
    2010+ F07 BMW 535i GT, 535i xDrive GT
    2011+ F10 BMW 535i 535i xDrive
    2011+ F13 BMW 640i Coupe, 640i Convertible
    2009+ F01 BMW 740i 740li
    2011+ F25 BMW X3 35iX
    2010+ E70 BMW X5 35iX
    2007-2014 E71 BMW X6 xDrive35i
    2009+ Z4 BMW Z4 sDrive35i Z4 sDrive35is
    Packaged by Turner
    Part #: 11517632426
    Price: $378.24 (USD) 
    In Stock
    Free Shipping Free Shipping
    OEM VDO Water Pump Steel Screw Set -- N54 N55

    A recommended replacement for the stock OE screws, these OEM VDO screws have been updated to a steel composition, making it so that thses bolts may be reused any number of times without any issues.

    OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform

    VDO
    Part #: 11517602123
    Price: $3.29 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Water Pump and Thermostat Package - N54 Engine - E82 135i, E9X 335i, E60 535i

    This packages covers the major components you would install along with a new water pump or thermostat. On the N54 cars (135i, 335i, 535i) the water pump and theremostat are mounted together. In fact, to get to the thermostat, BMW expects you to remove the water pump. This package covers the whole job. With the electric water pump now an integral part of the efficiency and performance of the engine, staying on top of its maintenance and replacement is the smart thing to do.

    Our water pump/thermostat overhaul includes:

    • OEM VDO electric water pump, p/n 11517588885 or 11517632426
    • OEM mounting screws for water pump (set of 3), p/n 11517602123
    • OEM Behr thermostat, p/n 11537549476
    • Original BMW connecting hose from thermostat to water pump, p/n 11537545665
    • Original BMW hose clamps for hose (x 2)
    • BUY AS A PACKAGE AND SAVE $$!

      The water pump on the N54 engine has more cooling responsibilities than ever before. Not only must it provide cooling for the engine, but it's also pumping fluid used to cool the turbocharger oil and automatic transmission oil. The good news is that the pump only works when, and only as much, as it needs to. The engine computer dictates how much fluid needs to be pumped through the system depending on the load. That means the system can actually stop the pump when warmer temperatures are needed. No longer is the pump spinning all the time from an engine-driven belt. The bad news is that it's now an electrical part, so a failure is usually immediate and with no warning. And if the electronics are at fault, there is no way to rebuild or repair it. Fortunately, the engine computer will force a shut down or reduce power if a problem occurs, preventing catastrophic engine damage.

      How to avoid a water pump failure in the future? Replacing the water pump as part of a regular interval schedule will ensure you always have a functioning pump in place. Since this technology is relatively new for BMW, therefore the lifecycle of the pump isn't yet known, we have been recommending replacement every 80-100k miles. This package of OE/OEM parts covers everything with Original BMW coolant offered to finish off the job. A proper bleeding procedure must be followed with the new electric pump.

      This water pump package fits the following BMWs with the N54 engine:
      2007-2010 E60 BMW 535i 535xi 535i xDrive
      2008-2010 E82 BMW 135i
      2011-2012 E82 BMW 1M Coupe
      2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
      2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
      2007-2010 E93 BMW 335i - Convertible
    Packaged by Turner
    Part #: TMS16432
    Price: $488.20 (USD) 
    $513.9 (Sale - Save 5%)
    In Stock
    Free Shipping Free Shipping
    Performance Water Pump And Thermostat Kit

    The water pumps in these BMW models are known for failure near 80,000 miles is a very common issue often times leaving the owner stranded. This kit provides a single stop for water pump and thermostat replacement needs to save the search and get you back on the road.

    The stock thermostat is designed to open at 97C. This leaves your engine running fairly hot, and running for quite awhile before your thermostat will begin operation. With the Mishimoto Racing thermostat, the activation temperature becomes 74C. That's 23C cooler, meaning you can rest easy knowing your engine will stay cooler to help avoid all the problems that can be associated with an engine running hot.

    Kit includes:

    • Genuine BMW Thermostat
    • Genuine BMW Electric Water Pump
    • Genuine BMW coolant
    • Mounting hardware required for both the thermostat and water pump
    Packaged by Turner
    Part #: 11518635090KT
    Price: $685.35 (USD) 
    Ships in 5 days
    Free Shipping Free Shipping
    Quantity:   
    Steel Mounting Bolt for N54 N55 Water Pump This is the mounting bolt used for the water pump on all N55 engines as well as later (updated) N54 engines. These are sold per bolt and 3 are required for mounting the water pump.

    This is a new and revised bolt design to match the updated water pump ( p/n 11517632426 ). BMW changed the design for the N55 and all subsequent replacement N54 pumps. The updated pump does not use a rubber isolator in the mounting flange. The previous water pump did have this rubber mount and required a longer bolt. The new bolts are also zinc-coated grade 8.8 steel instead of aluminum. That means the new bolts are re-usable instead of 1-time use like the old design.

    Sold per bolt. 3 are usually required for the N54/N55 water pump.

    When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

    This item fits the following BMWs:
    2007-2012 E82 BMW 135i
    2011 E90 BMW 335i 335xi 335i xDrive - Sedan
    2011-2013 E92 BMW 335i 335xi 335i xDrive - Coupe
    2011-2013 E93 BMW 335i - Convertible
    2012+ F30 BMW 335i - Sedan
    2007-2010 E60 BMW 535i 535xi 535i xDrive
    2010+ F07 BMW 535i GT, 535i xDrive GT
    2011+ F10 BMW 535i 535i xDrive
    2012+ F13 BMW 640i
    2009+ F01 BMW 740i 740li
    2013+ E84 BMW X1 35i
    2011+ F25 BMW X3 xDrive35i
    2010+ E70 BMW X5 xDrive35i
    Genuine BMW
    Part #: 11517602123
    Price: $1.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    OEM VDO Water Pump W/ Installation Hardware -- N54 N55

    A recommended replacement any time that the water pump has to be removed, these OEM VDO water pump screws are identical to genuine hardware but at a lower cause.

    OEM VDO is one of the largest OE providers in the world, supplying numerous vehicle brands, including BMW, with many of their genuine parts that build the vehicle before they ever reach the car lot. Entrusted by many of the top names in automotives and with their proven history of reliability, it makes all of us here at Turner confident that their line of OEM replacement parts are a perfect option to restore your vehicles original operation and performance. The same great quality or higher than Genuine BMW parts at a lower cost.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform.

    VDO
    Part #: 11517632426KT1
    Price: $378.24 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity: