Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW E82 H&R Coil Over Suspensions

BMW E82 H&R Coil Over Suspensions H&R Coil Overs provide you with an exceptional blend of ride and handling with the added feature of height-adjustability. With coil overs from H&R you get shocks and springs that are engineered together. The result is incredible handling with ride that is tuned for the street. Forget the notion that coil overs are only to be used in racing - they are now the perfect package for your streetcar. H&R coil overs have ride-height adjusting perches for most BMW models.

H&R is the original German coil over manufacturer - designing and testing coil overs from their base in Sauerland. H&R began by producing high-quality springs for motorsports and rally. Then grew to include high-performance street vehicles and later engineering their springs to work within custom-designed shock absorbers to form high-performance coil over suspension kits. Each kit is designed in-house, tested extensively (including the Nurburgring) and produced with quality materials. Every H&R coil over is TUV tested and approved and ISO certified.

You're currently viewing parts for your (E82) 1-series Coupe 2008+. Reset your chassis
For accurate results, specify your model below.
E82 128i/135i H&R Street Coilover Suspension Kit

The H&R Coil Over kit takes the traditional shock/spring package one step further. H&R combines their progressive-rate springs with specially valved shocks and adds height adjusters that let you set the ride height to your own personal tastes. These coil overs are designed for street use with progressive rate springs that start out soft and stiffen as they are compressed. This helps to keep the ride compliant while still giving better handling and balance.

H&R designs each suspension to work as a coil over. This means that the correct amount of travel has been built into each shock. And the shocks are valved specifically for the spring rates to give a tight and controlled ride without being harsh or ultra-stiff. Each H&R coil over is TUV tested and approved and meets ISO quality standards. These are used with the stock strut and shock mounts for a quick and easy install.

SPECIAL PRICING FOR A VERY LIMITED TIME!
FREE GROUND SHIPPING


Height adjustment range:
F: -1.2-2.5"
R: -1.0-1.75"

Eurotuner Magazine did a full tech article on installing this H&R coil over kit in a 135i. For the complete writeup, click here (E82 135i H&R Coil Over).

This coilover fits the following BMWs:
2008-2012 E82 BMW 128i 135i

H&R
Part #: 50402
Price: $1185.95 (USD) 
$1580 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
H&R Coil Over Spanner Wrench Set H&R spanner wrenches for H&R coil over kits. This set consists of both a small wrench for the lock ring (68-75mm OD) and a large wrench for the actual perch (80-90mm OD).
H&R
Part #: TMS16514
Price: $59.90 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
Bilstein Coil Over Wrench - Pin Style - Small Bilstein Coil Over wrench for some PSS, PSS9 and PSS10 kits. Small wrench for adjusting the spring perch and lock ring on coil overs that require the M-F round pin style of adjuster (not rectangular inter-locking adjuster). May also be used with other coil over kits (H&R, Moton, JRZ, etc) that use a similar adjuster.
Bilstein
Part #: E4-XS1-Z001A00
Price: $16.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
H&R Rear Ride Height Adjuster/Spring Perch (for 60mm I.D. springs) - E90/E92/F30/F32/E82 H&R makes it easy to adjust the rear ride height on cars with 60mm ID springs (road racing springs, H&R coil over springs -- not stock springs or any sport spring). These lower spring perches fit below the spring on the rear control arm (will not work on M3 arms). Adjustment is made by unbolting the shock to allow the spring to move freely, then turning the spring perch to raise or lower the ride height.

Mounted on Top of Spring

Sold Individually.


For more information on E9X H&R height adjusters and coil overs, click here .

This item fits the following BMWs:
2011 E82 BMW 1M Coupe
2006-2012 E90 BMW 325i 328i 330i 335d 335i - Sedan
2006-2012 E91 BMW 325i 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is - Coupe
2007-2013 E93 BMW 328i 335i 335is - Convertible
2012+ F30 BMW 320i 328d 328i 335i - Sedan
2013+ F32 BMW 428i 435i - Coupe
H&R
Part #: HR92-K-X141A01
Price: $79.95 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
E82 1M H&R Tuner Adjustable Coil-Over Suspension

 

H&R has introduced this Street Tuner CoilOver suspension kit for the 1M that has several unique features for the discerning enthusiast. H&R has designed this premium coil over specifically for the 1M using new materials and features not found on a typical 135 or M3 kit. The key features of this kit are the aluminum rear shocks with solid, Heim-joined lower mounts. The lighter weight from the aluminum and the free motion from the lower monoball makes for a more efficient shock motion and better response from the suspension. Combine these with our monoball upper shock mounts and you have race-bred shock technology for the ultimate BMW driver's car. H&R finely-tuned the rear shock dampening to reduce wheel hop. The wheel hop is inherent in the 1M and these H&R rear shocks go a long way in eliminating it. The front struts are a true nickel-plated, threaded body replacement for the stock strut. All four progressive-rate springs are included and rear aluminum ride height adjusters complete the set. You'll find this kit on H&R's own Project 1M so it has been dialed in by some of the best suspension engineers in Germany and the USA.

These 1M Coil Overs are height adjustable in the front and rear using spring perches associated with each spring. This helps to improve handling by lowering the center of gravity, reducing bodyroll with a stiffer spring, and reducing the unsightly wheel-fender gap.
Front Adjustment Range: -1.2 to -2.3 inches from stock
Rear Adjustment Range: -0.3 to -1.3 inches from stock

SPECIAL PRICING FOR A VERY LIMITED TIME! 
FREE GROUND SHIPPING 


This coil over fits the following BMWs:
2011+ E82 BMW 1 M Coupe

H&R
Part #: 28907-11
Price: $1386.95 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook