click to Chat Live
Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart

Home

Categories

Specials

Gifts & Clothing

  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages

Brakes

  1. Brake Overhaul Packages
  2. Brake Pads
  3. Brake Pad Sensors
  4. Brake Rotors
  5. StopTech Big Brake Kits
  6. Brembo Big Brake Kits
  7. Stainless Steel Brake Lines
  8. Brake Fluid
  9. Brake Calipers
  10. Caliper Rebuild Kits
  11. Parking Brake Parts
  12. Brake Master Cylinders
  13. ABS/DSC System Parts
  14. Brake Cooling Ducts & Backing Plates
  15. Brake Pads - Brembo GT BBK Calipers
  16. Brake Pads - StopTech BBK Calipers

Car Care & Accessories

  1. Car Covers
  2. Wheel & Tire Cleaning
  3. Wax, Polish and Cleaning Supplies
  4. Detailing Gear
  5. Leather & Plastic Care
  6. Car Cleaning Supplies
  7. Chassis Paint, Coatings, Sealants, and Rust Conversion

Drivetrain

  1. Differential and Gearing Upgrades
  2. Differential Mounts and Upgrades
  3. OEM Clutch Kits & Clutch Parts
  4. Performance Clutch Kits & Parts
  5. Lightweight Aluminum Flywheel Upgrades
  6. Stock OEM Dual Mass Flywheels
  7. Clutch Parts
  8. UUC Short Shift Kits
  9. Axle Shafts
  10. Driveshafts
  11. Performance Short Shift Kits
  12. Drivershaft Center Support Bearings
  13. Flex Discs & Guibos
  14. Transmission Mounts
  15. Transmission Parts

Engine Chips

  1. Shark Injector Performance Software, 1996-2005 Models
  2. Performance Flash Software, 2005+ Models
  3. Sprint Booster Drive-by-Wire Module

Engine Parts

  1. Engine Performance Packages
  2. Water Pumps
  3. Thermostats
  4. Radiators & Cooling System Overhaul Kits
  5. Radiator Hoses, Cooling Hoses, & Hose Sets
  6. Underdrive Power Pulleys
  7. Schrick Peformance Camshafts
  8. External Engine Parts
  9. Drive Belts & V-Belts
  10. Gaskets, Gasket Sets, Seals, & O-Rings
  11. Factory-Spec Replacement Turbos and Kits
  12. Crankcase Vent, PCV, and Oil Separator Systems
  13. Turbo Upgrades and Kits
  14. Motor Mounts
  15. Electrical Sensors, Switches, & Relays
  16. Ignition Parts
  17. Starter Motors & Starter Parts
  18. Fuel System Parts
  19. Internal Engine Parts
  20. Cylinder Head Parts & Head Bolts
  21. VANOS Units & Parts
  22. Rod Bearing Kits
  23. Oil Coolers & Oil Cooler Parts

Exhaust

  1. Supersprint Performance Exhaust Systems
  2. Performance Headers & Downpipes
  3. Exhaust Muffler Tips
  4. Oxygen Sensor - O2 Sensors
  5. Exhaust Gaskets Hangers and Parts

Exterior / Body

  1. Black Grills
  2. Chrome Grills & Trim
  3. Emblems & Decals for Hood, Trunk, and Wheels
  4. Front Spoilers, Bumper Covers, & Air Dams
  5. Rear Spoilers, Rear Wings, & Aprons
  6. Body Trim Parts & Accessories
  7. License Plate Brackets & License Plate Frames
  8. Window Regulators & Motors
  9. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  10. Hood Pins and AeroCatch Latches
  11. Racing Tow Hooks and Tow Straps

Intake

  1. aFe Cold-Air Intake Kits
  2. Dinan Cold Air Intake Kits
  3. Gruppe M Cold-Air Intake Kits
  4. Performance Intake Kits
  5. aFe Performance Air Filters
  6. K&N Performance Air Filters
  7. Intake Cleaning & Recharging Kits
  8. Intake Manifold Upgrades
  9. Intake Manifold Components (DISA, Vacuum, CCV, Etc)
  10. BOV, Chargepipe, and Intercooler Upgrade Kits
  11. Mass Air Sensor & Air Flow Meters
  12. Intake Boots & Hoses
  13. Throttle Body Parts

Interior

  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. MOMO Steering Wheels
  7. Shift Knobs, Shift Boots, & Shift Handles
  8. Seats & Seat Accessories
  9. Seat Belts and Racing Harnesses
  10. Cup Holders and Storage
  11. Carbon Fiber Interior Parts
  12. Heating & Air Conditioning
  13. Interior Switches and Switchgear
  14. Sunshades & Windscreens
  15. Interior Trim & Accessories

Lighting

  1. Angel Eye Headlight Conversions
  2. Bulbs for Headlights, Turn Signals and Tail Lights
  3. Headlights, Headlight Lenses, & Headlight Parts
  4. Fog Lights, Fog Light Lenses, & Fog Light Parts
  5. Tail Lights
  6. Stealth Bulbs

Maintenance

  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Fuel Filters
  5. Cabin Air Filters, Heppa Filters, & Microfilters
  6. Transmission Filter Kits & Transmission Service Parts
  7. Ignition Coils
  8. Spark Plugs
  9. Service Reset Tools & Fault Code Readers
  10. Anti-Freeze and Coolant
  11. Engine Oils - Genuine BMW and OEM
  12. Power Steering and Hydraulic Fluids
  13. Transmission and Gear Oil - Genuine BMW and OEM
  14. MOTUL Engine Oil and Gear Lubricants
  15. Red Line Oil & Fluids

Suspension

  1. Shocks & Struts
  2. H&R Performance Springs
  3. Spring & Shock Packages
  4. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  5. H&R Coil Over Suspensions
  6. KW Coil Over Suspensions
  7. Chassis Reinforcement Kits & Parts
  8. Sway Bar Kits
  9. Sway Bar Links & Sway Bar Parts
  10. Camber / Caster Kits
  11. Strut Braces & Stress Bars
  12. Control Arm Replacements & Upgrades
  13. Suspension Bushings & Mounts
  14. Wheel Bearings & Hub Assemblies
  15. Steering Racks & Power Steering Pumps
  16. Tie Rods & Steering Parts
  17. Coil Over Spring Hardware

Wheels

  1. Apex Flow Formed Alloy Wheels
  2. Forgeline Custom Forged Alloy Wheels
  3. HRE FlowForm Performance Alloy Wheels
  4. D Force Flow Formed Alloy Wheels
  5. Original BMW Wheels and Wheel Upgrades
  6. Winter Wheel & Snow Tire Packages
  7. Turner Motorsport Wheel Spacers
  8. H&R Wheel Spacers
  9. Wheel Bolts, Wheel Studs and Nuts
  10. Wheel Emblems, Caps, and Accessories

Tools

  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Clutch Alignment Tools
  5. Coil Over Wrenches
  6. Cylinder Head and VANOS Tools
  7. Fan and Fan Clutch Tools
  8. Fault Code Readers and OBD Scan Tools
  9. Fuel System Tools
  10. Genuine BMW Tool Kits
  11. Oil Service Tools
  12. Sockets
  13. Spark Plug Sockets
  14. Transmission and Differential Tools
  15. Wheel Pin Tools
  16. Workshop Chemicals

Clearance

Choose BMW

BMW 1 Series

  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+

BMW 2 Series

  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+
  3. (F87) M2 2016+

BMW 3 Series

  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+

BMW 4 Series

  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2014+
  3. (F34) 4-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+

BMW 5 Series

  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+

BMW 6 Series

  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Coupe 2011+
  6. (F13) 6-Series Convertible 2011+

BMW 7 Series

  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+

BMW 8 Series

BMW Classics (E9, Bavaria, Isetta, etc)

  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978

BMW X Series (SAV)

  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+

BMW Z Series

  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003

BMW 1600-2002 / tii

BMW i Series

  1. (I01) BMW i3 2014+
  2. (I12) BMW i8 2014+

MINI Cooper and Cooper S

Racing

Racing Home

Racing News

Racing Schedule

Racing Photo Gallery

Gallery

Photo Gallery

Wallpaper

Project Cars

  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone

Video Gallery

Projects

Turner i8

Turner F80 M3

Turner F82 M4

Turner X5 M

Turner F22 2 Series

Turner F13 M6

Turner F10 M5

Turner F30 335i

Turner E9X M3

Turner E92 335i

Turner E82 1 Series

Turner ActiveE (100% Electric)

Turner E46 M3

Turner E46 330i ZHP

Turner E36 M3

Turner E30 M3

Turner MINI Cooper S

McLaren F1

Turner E92 M3 Lime Rock

Turner F80 M3 Silverstone

About Us

About Turner Motorsport

Customer Feedback

The Turner Team

Employment Opportunities

Returns Policy

Shipping Info

Contact Us

Privacy Policy

Security Policy

FAQs

BMW E85 StopTech Big Brake Kits



Even the average BMW enthusiast can quickly exceed the stock brake's performance threshold. Factor in increased horsepower, better suspensions, stickier tires, and multiple high speed stops any stock braking system will show its shortcomings. Stock brakes were designed to be used in day-to-day traffic with light pedal pressure and stops from low speeds. They are absolutely unsuitable for regular hard use, either on the street or a racetrack.

Upgrading pads is only the first step - it works for most people who do not regularly push their cars to the absolute limit. But all cars capable of serious speeds should have serious brakes. The real key to better brakes is heat management and bigger is better. Brake rotors act as heat banks - a larger rotor simply has more capacity to store heat. StopTech has also designed their discs with better internal cooling vanes to dissipate the heat faster. Combined with aluminum calipers and rotor hats, this all combines to prevent heat from being trapped and soaking into the components. If not sufficiently released, heat soak will eventually reach into the brake fluid, causing more serious and immediate braking issues. Their engineeering and expertise is why you will find StopTech Brakes on our Turner Motorsport racecars and has led them to Tier 1 OEM status (a direct supplier to several vehicle manufacturers), four industry patents, and TUV and ISO/TS Quality Management System certification for brake systems and components. StopTech Brakes are among the best in the world for performance and racing braking systems. Made in the USA.

Additional Info:
StopTech Brakes Overview
Wheel to Caliper Clearance Charts
You're currently viewing parts for your (E85/E86/E89) Z4 2003+. Reset your chassis
For accurate results, specify your model below.
Position: Front
Caliper: 4-piston ST40
Colors: black, red, silver, blue, yellow, custom (call)
Rotors: 332x32mm, cross-drilled or slotted
Also Included: stainless steel brake lines, StopTech Street Performance pads, hardware

Race Technology Used By Turner Motorsport StopTech Brakes puts championship-winning race technology and state-of-the-art engineering under your feet. StopTech's Front Big Brake Kit for E36/E46/Z3/Z4 models is engineered to work with the stock brake hydraulics and ABS/DSC system. StopTech builds each kit around the specific vehicle dynamics, engineering the system to achieve the correct brake balance. This brake upgrade gives better stopping performance in everyday driving, aggressive street driving, or all-out track days. By increasing the rotor size, using a larger pad, and a fixed forged aluminum caliper, you can improve your braking performance substantially for any condition! StopTech Brakes have been used on Turner Motorsport racecars since 2003, winning 5 sports car championships and recording numerous race wins since.

Safety Improvements from A Big Brake Kit:
+ Caliper design improves brake application and increases torque - braking is stronger meaning shorter stopping distances and faster response
+ Vehicle-specific design - improves brake feel with a firmer pedal
+ Larger and thicker rotors - less fade and longer pad and rotor life

Advantages of a StopTech Big Brake Kit:
+ extremely strong caliper and mounting system - reduces flex and deflection, improving torque application to the disc
+ Several color options available
+ Vehicle-specific calipers that maintain correct brake proportioning and balance
+ AeroRotor patented vaning for superior air flow
+ Cross-Drilled for street use or Gas-Slotted for street or track use
+ Billet aluminum mounting hats for superior strength over steel
+ DOT-compliant stainless steel brake lines
+ Street Performance brake pads that work on both street and light track use

Maximizing brake efficiency by braking with all four wheels… Sounds obvious right? Many bolt-on caliper upgrades and other big brake kits are not built with the specific vehicle's dynamics in mind. With too much braking force on the front, rear traction is compromised. And vice-versa. Brake traction is better when all four tires are doing the work. Most BMWs have 50-50 weight distribution so the correct braking proportioning is crucial! StopTech engineers each kit around that vehicle's dynamics by altering the size and number of pistons in the caliper to match the rotor size used in the kit. Bigger is not always better…

Big brake kits have larger components than the factory brakes. This kit requires 17" or larger wheels but some wheel designs and sizes may not clear without wheel spacers. StopTech has produced a template that has all of the critical dimensions of this brake kit. You can download and print it here and then check the clearance on your wheels.

Brake FAQs
Brake Pad Buying Guide
Brake Rotor Buying Guide


StopTech Front Brake Kit Applications:
1992-1999 E36 323i, 323is, 325i, 325is, 325i, 328i, 328is, including all coupe, sedan, and convertible models
1999-2006 E46 323i, 323Ci, 325i, 325Ci, 328i, 328Ci, including all coupe, sedan, and convertible models (but not Xi AWD cars)
1997-2002 Z3, except MZ3
2003-2006 Z4 (M54 engine) except Z4 M


We will meet or beat any advertised price for StopTech Big Brake Kits! Call or e-mail us with the published pricing that you found and we will do our best to not only match that price but actually beat it!

Part #: 83.133.4600
Price: $2495.00 (USD) 
Position: Matching Front and Rear
Front Calipers: 6-piston ST60
Rear Calipers: 4-piston ST40
Colors: black, red, silver, blue, yellow, custom (call)
Rotors (front and rear): 355x32mm, cross-drilled or slotted
Also Included: stainless steel brake lines, StopTech Street Performance pads, hardware

Race Technology Used By Turner Motorsport StopTech Brakes puts championship-winning race technology and state-of-the-art engineering under your feet. StopTech's Front and Rear Big Brake Kit for the Z4 M is a model-specific brake upgrade engineered to work with the stock brake hydraulics and ABS/DSC system. StopTech builds each kit around the specific vehicle, engineering the system to achieve the correct brake balance. This brake upgrade gives better stopping performance in everyday driving, aggressive street driving, or all-out track days. By increasing the rotor size, using a larger pad, and a fixed forged aluminum caliper, you can improve your braking performance substantially for any condition! StopTech Brakes have been used on Turner Motorsport racecars since 2003, winning 5 sports car championships and recording numerous race wins since.

Safety Improvements from A Big Brake Kit:
+ Caliper design improves brake application and increases torque - braking is stronger meaning shorter stopping distances and faster response
+ Vehicle-specific design - improves brake feel with a firmer pedal
+ Larger and thicker rotors - less fade and longer pad and rotor life

Advantages of a StopTech Big Brake Kit:
+ extremely strong caliper and mounting system - reduces flex and deflection, improving torque application to the disc
+ Several color options available
+ Vehicle-specific calipers that maintain correct brake proportioning and balance
+ AeroRotor patented vaning for superior air flow
+ Cross-Drilled for street use or Gas-Slotted for street or track use
+ Billet aluminum mounting hats for superior strength over steel
+ DOT-compliant stainless steel brake lines
+ Street Performance brake pads that work on both street and light track use

Maximizing brake efficiency by braking with all four wheels… Sounds obvious right? Many bolt-on caliper upgrades and other big brake kits are not built with the specific vehicle's dynamics in mind. With too much braking force on the front, rear traction is compromised. And vice-versa. Brake traction is better when all four tires are doing the work. Most BMWs have 50-50 weight distribution so the correct braking proportioning is crucial! StopTech engineers each kit around that vehicle's dynamics by altering the size and number of pistons in the caliper to match the rotor size used in the kit. Bigger is not always better…

Brake FAQs
Brake Pad Buying Guide
Brake Rotor Buying Guide

Wheel Fitment Guides: Wheel spoke-to-brake caliper clearance is critical since the new caliper is physically larger and the in a different position. StopTech has produced these cutaway diagrams for you to print and place on the backside of your wheel to check for clearance. Wheels that do not clear will need a wheel spacer. The minimum recommended clearance between the wheel and caliper is 3mm.
E85 Z4 M - front 6-piston/355mm rotor
E85 Z4 M - rear 4-piston/355mm rotor

Z4 M Big Brake Kit Applications:
2006-2008 E85 roadster, E86 coupe Z4 M

We will meet or beat any advertised price for StopTech Big Brake Kits! Call or e-mail us with the published pricing that you found and we will do our best to not only match that price but actually beat it!

Part #: 83.155.6747
Price: $4811.00 (USD) 

Position: Rear (must be used with a 355 or 380mm front kit)
Caliper: 4-piston ST40
Colors: black, red, silver, blue, yellow, custom (call)
Rotors: 355x32, cross-drilled or slotted
Also Included: stainless steel brake lines, StopTech Street Performance pads, hardware

StopTech Brakes puts championship-winning race technology and state-of-the-art engineering under your feet. StopTech's Rear Big Brake Kit for the E46 M3 (non-ZCP) is engineered to work with the stock brake hydraulics and ABS/DSC system. StopTech builds each kit around the specific vehicle, engineering the system to achieve the correct brake balance. This brake upgrade gives better stopping performance in everyday driving, aggressive street driving, or all-out track days. By increasing the rotor size, using a larger pad, and a fixed forged aluminum caliper, you can improve your braking performance substantially for any condition! StopTech Brakes have been used on Turner Motorsport racecars since 2003, winning 5 sports car championships and recording numerous race wins since.

Safety Improvements from A Big Brake Kit:
+ Caliper design improves brake application and increases torque - braking is stronger meaning shorter stopping distances and faster response
+ Vehicle-specific design - improves brake feel with a firmer pedal
+ Larger and thicker rotors - less fade and longer pad and rotor life

Advantages of a StopTech Big Brake Kit:
+ extremely strong caliper and mounting system - reduces flex and deflection, improving torque application to the disc
+ Several color options available
+ Vehicle-specific calipers that maintain correct brake proportioning and balance
+ AeroRotor patented vaning for superior air flow
+ Cross-Drilled for street use or Gas-Slotted for street or track use
+ Billet aluminum mounting hats for superior strength over steel
+ DOT-compliant stainless steel brake lines
+ Street Performance brake pads that work on both street and light track use

Maximizing brake efficiency by braking with all four wheels� Sounds obvious right? Many bolt-on caliper upgrades and other big brake kits are not built with the specific vehicle's dynamics in mind. With too much braking force on the front, rear traction is compromised. And vice-versa. Brake traction is better when all four tires are doing the work. Most BMWs have 50-50 weight distribution so the correct braking proportioning is crucial! StopTech engineers each kit around that vehicle's dynamics by altering the size and number of pistons in the caliper to match the rotor size used in the kit. Bigger is not always better�

Big brake kits have larger components than the factory brakes. Some wheel designs and sizes may not clear without wheel spacers. StopTech has produced a template that has all of the critical dimensions of this brake kit. You can download and print it here and then check the clearance on your wheels.

 

Brake FAQs

Brake Pad Buying Guide

Brake Rotor Buying Guide



Z4M Rear StopTech Brake Kit Applications:
2006-2008 E85 BMW Z4 M Roadster M Coupe


 

We will meet or beat any advertised price for StopTech Big Brake Kits! Call or e-mail us with the published pricing that you found and we will do our best to not only match that price but actually beat it!

 

Part #: 83.155.0047
Price: $1737.00 (USD) 

Position: Front
Caliper: 4-piston ST40
Colors: black, red, silver, blue, yellow, custom (call)
Rotors: 328x28mm, cross-drilled or slotted
Also Included: stainless steel brake lines, StopTech Street Performance pads, hardware

StopTech Brakes puts championship-winning race technology and state-of-the-art engineering under your feet. StopTech's Front Big Brake Kit for E36/E46/Z3/Z4 models is engineered to work with the stock brake hydraulics and ABS/DSC system. StopTech builds each kit around the specific vehicle dynamics, engineering the system to achieve the correct brake balance. This brake upgrade gives better stopping performance in everyday driving, aggressive street driving, or all-out track days. By increasing the rotor size, using a larger pad, and a fixed forged aluminum caliper, you can improve your braking performance substantially for any condition! StopTech Brakes have been used on Turner Motorsport racecars since 2003, winning 5 sports car championships and recording numerous race wins since.

Safety Improvements from A Big Brake Kit:
+ Caliper design improves brake application and increases torque - braking is stronger meaning shorter stopping distances and faster response
+ Vehicle-specific design - improves brake feel with a firmer pedal
+ Larger and thicker rotors - less fade and longer pad and rotor life

Advantages of a StopTech Big Brake Kit:
+ extremely strong caliper and mounting system - reduces flex and deflection, improving torque application to the disc
+ Several color options available
+ Vehicle-specific calipers that maintain correct brake proportioning and balance
+ AeroRotor patented vaning for superior air flow
+ Cross-Drilled for street use or Gas-Slotted for street or track use
+ Billet aluminum mounting hats for superior strength over steel
+ DOT-compliant stainless steel brake lines
+ Street Performance brake pads that work on both street and light track use

Maximizing brake efficiency by braking with all four wheels� Sounds obvious right? Many bolt-on caliper upgrades and other big brake kits are not built with the specific vehicle's dynamics in mind. With too much braking force on the front, rear traction is compromised. And vice-versa. Brake traction is better when all four tires are doing the work. Most BMWs have 50-50 weight distribution so the correct braking proportioning is crucial! StopTech engineers each kit around that vehicle's dynamics by altering the size and number of pistons in the caliper to match the rotor size used in the kit. Bigger is not always better�

Big brake kits have larger components than the factory brakes. This kit requires 17" or larger wheels but some wheel designs and sizes may not clear without wheel spacers. StopTech has produced a template that has all of the critical dimensions of this brake kit.
Z3 clearance template.
Z4 clearance template.

 

Brake FAQs

Brake Pad Buying Guide

Brake Rotor Buying Guide



StopTech Front Brake Kit Applications:
1992-1999 E36 323i, 323is, 325i, 325is, 325i, 328i, 328is, including all coupe, sedan, and convertible models
1999-2006 E46 323i, 323Ci, 325i, 325Ci, 328i, 328Ci, including all coupe, sedan, and convertible models (but not Xi AWD cars)
1997-2002 Z3, except MZ3
2003-2006 Z4 (M54 engine) except Z4 M


 

We will meet or beat any advertised price for StopTech Big Brake Kits! Call or e-mail us with the published pricing that you found and we will do our best to not only match that price but actually beat it!

 

Part #: 83.133.4300
Price: $1836.00 (USD) 
Position: Front
Caliper: 4-piston ST40
Colors: black, red, silver, blue, yellow, custom (call)
Rotors: 355x32, cross-drilled or slotted
Also Included: stainless steel brake lines, StopTech Street Performance pads, hardware

Race Technology Used By Turner Motorsport StopTech Brakes puts championship-winning race technology and state-of-the-art engineering under your feet. StopTech's Front Big Brake Kit for the Z4 M is engineered to work with the stock brake hydraulics and ABS/DSC system. StopTech builds each kit around the specific vehicle, engineering the system to achieve the correct brake balance. This brake upgrade gives better stopping performance in everyday driving, aggressive street driving, or all-out track days. By increasing the rotor size, using a larger pad, and a fixed forged aluminum caliper, you can improve your braking performance substantially for any condition! StopTech Brakes have been used on Turner Motorsport racecars since 2003, winning 5 sports car championships and recording numerous race wins since.

Safety Improvements from A Big Brake Kit:
+ Caliper design improves brake application and increases torque - braking is stronger meaning shorter stopping distances and faster response
+ Vehicle-specific design - improves brake feel with a firmer pedal
+ Larger and thicker rotors - less fade and longer pad and rotor life

Advantages of a StopTech Big Brake Kit:
+ extremely strong caliper and mounting system - reduces flex and deflection, improving torque application to the disc
+ Several color options available
+ Vehicle-specific calipers that maintain correct brake proportioning and balance
+ AeroRotor patented vaning for superior air flow
+ Cross-Drilled for street use or Gas-Slotted for street or track use
+ Billet aluminum mounting hats for superior strength over steel
+ DOT-compliant stainless steel brake lines
+ Street Performance brake pads that work on both street and light track use

Maximizing brake efficiency by braking with all four wheels… Sounds obvious right? Many bolt-on caliper upgrades and other big brake kits are not built with the specific vehicle's dynamics in mind. With too much braking force on the front, rear traction is compromised. And vice-versa. Brake traction is better when all four tires are doing the work. Most BMWs have 50-50 weight distribution so the correct braking proportioning is crucial! StopTech engineers each kit around that vehicle's dynamics by altering the size and number of pistons in the caliper to match the rotor size used in the kit. Bigger is not always better…

Big brake kits have larger components than the factory brakes. Some wheel designs and sizes may not clear without wheel spacers. StopTech has produced a template that has all of the critical dimensions of this brake kit. You can download and print it here and then check the clearance on your wheels.

Brake FAQs
Brake Pad Buying Guide
Brake Rotor Buying Guide


Z4 M Front StopTech Big Brake Kit Applications:
2006-2008 E85 roadster, E86 coupe Z4 M 2001-2006 E46 BMW M3 with ZCP or CSL brakes


We will meet or beat any advertised price for StopTech Big Brake Kits! Call or e-mail us with the published pricing that you found and we will do our best to not only match that price but actually beat it!

Part #: 83.155.4700
Price: $2895.00 (USD) 
Position: Front
Caliper: 6-piston ST60
Colors: black, red, silver, blue, yellow, custom (call)
Rotors: 355x32, cross-drilled or slotted
Also Included: stainless steel brake lines, StopTech Street Performance pads, hardware

Race Technology Used By Turner Motorsport StopTech Brakes puts championship-winning race technology and state-of-the-art engineering under your feet. StopTech's Front Big Brake Kit for the Z4 M is engineered to work with the stock brake hydraulics and ABS/DSC system. StopTech builds each kit around the specific vehicle, engineering the system to achieve the correct brake balance. This brake upgrade gives better stopping performance in everyday driving, aggressive street driving, or all-out track days. By increasing the rotor size, using a larger pad, and a fixed forged aluminum caliper, you can improve your braking performance substantially for any condition! StopTech Brakes have been used on Turner Motorsport racecars since 2003, winning 5 sports car championships and recording numerous race wins since.

Safety Improvements from A Big Brake Kit:
+ Caliper design improves brake application and increases torque - braking is stronger meaning shorter stopping distances and faster response
+ Vehicle-specific design - improves brake feel with a firmer pedal
+ Larger and thicker rotors - less fade and longer pad and rotor life

Advantages of a StopTech Big Brake Kit:
+ extremely strong caliper and mounting system - reduces flex and deflection, improving torque application to the disc
+ Several color options available
+ Vehicle-specific calipers that maintain correct brake proportioning and balance
+ AeroRotor patented vaning for superior air flow
+ Cross-Drilled for street use or Gas-Slotted for street or track use
+ Billet aluminum mounting hats for superior strength over steel
+ DOT-compliant stainless steel brake lines
+ Street Performance brake pads that work on both street and light track use

Maximizing brake efficiency by braking with all four wheels… Sounds obvious right? Many bolt-on caliper upgrades and other big brake kits are not built with the specific vehicle's dynamics in mind. With too much braking force on the front, rear traction is compromised. And vice-versa. Brake traction is better when all four tires are doing the work. Most BMWs have 50-50 weight distribution so the correct braking proportioning is crucial! StopTech engineers each kit around that vehicle's dynamics by altering the size and number of pistons in the caliper to match the rotor size used in the kit. Bigger is not always better…

Big brake kits have larger components than the factory brakes. Some wheel designs and sizes may not clear without wheel spacers. StopTech has produced a template that has all of the critical dimensions of this brake kit. You can download and print it here and then check the clearance on your wheels.

Brake FAQs
Brake Pad Buying Guide
Brake Rotor Buying Guide


Z4 M Front StopTech Big Brake Kit Applications:
2006-2008 E85 roadster, E86 coupe Z4 M

We will meet or beat any advertised price for StopTech Big Brake Kits! Call or e-mail us with the published pricing that you found and we will do our best to not only match that price but actually beat it!

Part #: 83.155.6700
Price: $3295.00 (USD) 

Position: Front
Caliper: 2-piston ST22
Colors: black, red, silver, blue, yellow, custom (call)
Rotors: 328x28mm, cross-drilled or slotted
Also Included: stainless steel brake lines, StopTech Street Performance pads, hardware

StopTech Brakes puts championship-winning race technology and state-of-the-art engineering under your feet. StopTech's Front Big Brake Kit for E36/E46/Z3/Z4 models is engineered to work with the stock brake hydraulics and ABS/DSC system. StopTech builds each kit around the specific vehicle dynamics, engineering the system to achieve the correct brake balance. This brake upgrade gives better stopping performance in everyday driving, aggressive street driving, or all-out track days. By increasing the rotor size, using a larger pad, and a fixed forged aluminum caliper, you can improve your braking performance substantially for any condition! StopTech Brakes have been used on Turner Motorsport racecars since 2003, winning 5 sports car championships and recording numerous race wins since.

Safety Improvements from A Big Brake Kit:
+ Caliper design improves brake application and increases torque - braking is stronger meaning shorter stopping distances and faster response
+ Vehicle-specific design - improves brake feel with a firmer pedal
+ Larger and thicker rotors - less fade and longer pad and rotor life

Advantages of a StopTech Big Brake Kit:
+ extremely strong caliper and mounting system - reduces flex and deflection, improving torque application to the disc
+ Several color options available
+ Vehicle-specific calipers that maintain correct brake proportioning and balance
+ AeroRotor patented vaning for superior air flow
+ Cross-Drilled for street use or Gas-Slotted for street or track use
+ Billet aluminum mounting hats for superior strength over steel
+ DOT-compliant stainless steel brake lines
+ Street Performance brake pads that work on both street and light track use

Maximizing brake efficiency by braking with all four wheels� Sounds obvious right? Many bolt-on caliper upgrades and other big brake kits are not built with the specific vehicle's dynamics in mind. With too much braking force on the front, rear traction is compromised. And vice-versa. Brake traction is better when all four tires are doing the work. Most BMWs have 50-50 weight distribution so the correct braking proportioning is crucial! StopTech engineers each kit around that vehicle's dynamics by altering the size and number of pistons in the caliper to match the rotor size used in the kit. Bigger is not always better�

Big brake kits have larger components than the factory brakes. This kit requires 17" or larger wheels but some wheel designs and sizes may not clear without wheel spacers. StopTech has produced a template that has all of the critical dimensions of this brake kit.You can download and print it here and then check the clearance on your wheels.

 

Brake FAQs

Brake Pad Buying Guide

Brake Rotor Buying Guide



StopTech Front Brake Kit Applications:
1992-1999 E36 323i, 323is, 325i, 325is, 325i, 328i, 328is, including all coupe, sedan, and convertible models
1999-2006 E46 323i, 323Ci, 325i, 325Ci, 328i, 328Ci, including all coupe, sedan, and convertible models (but not Xi AWD cars)
1997-2002 Z3, except MZ3
2003-2006 Z4 (M54 engine) except Z4 M


 

We will meet or beat any advertised price for StopTech Big Brake Kits! Call or e-mail us with the published pricing that you found and we will do our best to not only match that price but actually beat it!

 

Part #: 83.133.0023
Price: $1836.00 (USD) 

Position: Front
Caliper: 6-piston ST60
Colors: black, red, silver, blue, yellow, custom (call)
Rotors: 380x32, cross-drilled or slotted
Also Included: stainless steel brake lines, StopTech Street Performance pads, hardware

StopTech Brakes puts championship-winning race technology and state-of-the-art engineering under your feet. StopTech's Front Big Brake Kit for the BMW E60 545/550 and E63 645/650 is engineered to work with the stock brake hydraulics and ABS/DSC system. StopTech builds each kit to achieve the correct brake balance. This brake upgrade gives better stopping performance in everyday driving, aggressive street driving, or all-out track days. By increasing the rotor size, using a larger pad, and a fixed forged aluminum caliper, you can improve your braking performance substantially for any condition! StopTech Brakes have been used on Turner Motorsport racecars since 2003, winning 5 sports car championships and recording numerous race wins since.

Safety Improvements from A Big Brake Kit:
+ Caliper design improves brake application and increases torque - braking is stronger meaning shorter stopping distances and faster response
+ Vehicle-specific design - improves brake feel with a firmer pedal
+ Larger and thicker rotors - less fade and longer pad and rotor life

Advantages of a StopTech Big Brake Kit:
+ extremely strong caliper and mounting system - reduces flex and deflection, improving torque application to the disc
+ Several color options available
+ Vehicle-specific calipers that maintain correct brake proportioning and balance
+ AeroRotor patented vaning for superior air flow
+ Cross-Drilled for street use or Gas-Slotted for street or track use
+ Billet aluminum mounting hats for superior strength over steel
+ DOT-compliant stainless steel brake lines
+ Street Performance brake pads that work on both street and light track use

Maximizing brake efficiency by braking with all four wheels� Sounds obvious right? Many bolt-on caliper upgrades and other big brake kits are not built with the specific vehicle's dynamics in mind. With too much braking force on the front, rear traction is compromised. And vice-versa. Brake traction is better when all four tires are doing the work. Most BMWs have 50-50 weight distribution so the correct braking proportioning is crucial! StopTech engineers each kit around that vehicle's dynamics by altering the size and number of pistons in the caliper to match the rotor size used in the kit. Bigger is not always better�

Big brake kits have larger components than the factory brakes. Some wheel designs and sizes may not clear without wheel spacers. StopTech has produced a template that has all of the critical dimensions of this brake kit. You can download and print it here and then check the clearance on your wheels.

 

Brake FAQs

Brake Pad Buying Guide

Brake Rotor Buying Guide



Front StopTech Brake Kit Applications:
2001-2006 E46 BMW M3 with ZCP or CSL brakes

 

We will meet or beat any advertised price for StopTech Big Brake Kits! Call or e-mail us with the published pricing that you found and we will do our best to not only match that price but actually beat it!

 

Part #: 83.156.6800
Price: $2838.00 (USD) 
Get notified about money saving
specials & deals for your BMW
enter your email address
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook




    • 1-800-280-6966
      Mon-Thur 9am-6pm ET, Fri 9am-5pm ET

      • © TurnerMotorsport.com 1993-2016. All Rights Reserved.