Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW E88 Oil Coolers & Oil Cooler Parts

BMW E88 Oil Coolers & Oil Cooler Parts The condition and state of your oil can make or break your day at the track. Oil is working best during a certain temperature range and when exceeded the protective properties of oil will break down. This is especially critical with older, dirty oil. Newer cars with high underhood temperatures are even more at risk. Aside from frequent oil changes and more capacity the best way to keep healthy oil flowing through your engine vitals is with an oil cooler. We offer track-developed oil cooler kits and other accessories aimed at reducing oil temps or making your current setup work safely and more efficiently. An oil cooler will not make your car faster or handle better. It's simply excellent preventative action to avoid costly troubles in the future.
You're currently viewing parts for your (E88) 1-series Convertible 2008+. Reset your chassis
For accurate results, specify your model below.
Oil Cooler Line O-Ring This is the sealing o-ring used for many oil cooler kits on various BMW models. They're also a prime source for oil leaks because the o-ring gets 'flat' or shrinks or becomes damaged. These are usually easy to change though which puts an end to annoying small oil leaks.

In German, Rein means Pure. In the automotive industry the Rein name has quickly come to represent quality. With fitments for some of the world’s finest automobiles including BMW and Mini and guaranteed OE quality, Rein is a name you can trust.

Priced per o-ring but most cars have 4 to replace.

This item fits the following BMWs:
2008-2012 E82 BMW 135i 1M Coupe
1987-1991 E30 BMW 325is M3
1994-1999 E36 BMW Euro M3
1992-1999 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 with Euro oil cooler
2001-2006 E46 BMW M3
2006-2011 E90 BMW 335i 335xi 335i xDrive M3 - Sedan
2007-2013 E92 BMW 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2013 E93 BMW 335i M3 - Convertible
2012+ F30 BMW 335i - Sedan
1989-1995 E34 BMW 535i M5
2006-2010 E60 BMW 550i M5
1987-1989 E24 BMW M6
2004-2011 E63 BMW 650i M6
1988-1992 E32 BMW 735i 735il
2002-2008 E65 BMW 750i 750li Alpina B7
2009+ F01 F02 BMW 750i 750li 750i xDrive 750li xDrive Alpina B7
2006-2010 E83 BMW X3 3.0i X3 3.0si
2000-2006 E53 BMW X5 4.4i X5 4.8is
2007-2013 E70 BMW X5 xDrive35d
2001-2002 Z3 BMW Z3 M Roadster M Coupe
2006-2008 E85 BMW Z4 M Roadster M Coupe
2009+ Z4 BMW Z4 sDrive35i Z4 sDrive35is
Part #: 17222245358
Price: $1.09 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Turner Motorsport Oil Cooler Line Fitting Kit - E36 E46 E82 E9x Made in the USA NEW, updated design allows for more applications! The TMS Oil Cooler Fitting kit allows much more flexibility in the routing of oil cooler lines. Standard oil coolers utilize “hard lines” which can cause fitment issues for cars with superchargers, Accusumps, or other aftermarket performance parts. Our kit replaces the oil cooler hard lines with two TMS engineered -10 AN fittings, mounting bracket, and O-rings. Flexible braided hoses can then be run to the oil cooler which eliminates routing issues from supercharges, intakes, and other components. The brackets are CNC machined stainless steel and the -10 AN fittings are lightweight aluminum.

NEW REVISED Kit fits E36 Euro oil filter housing, E36 Euro oil cooler, E46 M3 stock oil filter housing, E46 M3 stock oil cooler , and works great with aftermarket oil coolers.

Clickhere for installation instructions.

-10 AN Oil Line Connector Kit BMW Applications:
2008+ E82 BMW 135i 1M Coupe - with factory oil cooler housing
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3- Euro oil filter housing (adaptable to US models), Euro oil cooler
2001-2006 E46 BMW M3 - US/Euro oil filter housing, US/Euro oil cooler
2006-2011 E90 BMW 335i 335xi 335i xDrive - Sedan - with factory oil cooler housing
2007-2012 E92 BMW 335i 335is 335xi 335i xDrive - Coupe - with factory oil cooler housing
2007-2012 E93 BMW 335i - Convertible - with factory oil cooler housing
Turner Motorsport
Part #: TEN9910200
Price: $69.95 (USD) 
In Stock
Free Shipping Free Shipping
E82 135i Dinan High Capacity Oil Cooler System

High oil temps are one of the triggers that causes the engine electronics to curtail boost, cut power, and possibly switch to limp mode. The stock oil system was not designed with enough cushion for running more boost. We have seen limp modes come from stock vehicles on the race track. To prevent limp modes and reduced performance, Dinan has developed this oil cooler kit with much more surface area than stock.

The Dinan oil cooler kit fits in the stock location behind the front spoiler on the passenger side of the car. This is an ideal location to maximize the ram air effect from the front bumper. New air ducts and vents into the wheel well help improve air flow. PTFE hoses with race-quality fittings and all hardware are included for install. Some Dinan oil cooler kits can even be used to upgrade cars that never came with an oil cooler. Once you see the Dinan oil cooler side-by-side with the factory cooler, you will understand why it's so much better. The Dinan cooler is bigger in every way - larger capacity, greater surface area, and more cooling tubes.

Total Oil Volume9.5oz19oz
Surface Area45sq/in67.5sq/in
# Cooling Tubes1023
Tube Length90 in.207 in
Tube Area112.5sq/in414 sq/in

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The oil cooler kit is worth 3 points towards your Dinan badge.

This item fits the following BMWs:
2008-2013 E82 E88 BMW 135i

Part #: E82135-D570
Price: $1335.81 (USD) 
$1484.23 (Sale - Save 7%)
Ships from Supplier - Aug 27, 2018
Free Shipping Free Shipping
Oil Cooler Thermostat Housing - E90 E92 E60 E82 N54 N55 Replace the oil filter housing/oil cooler thermostat housing with the thermostat on your BMW equipped with either the N54 or N55 6 cylinder turbo engine.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2011-2013 E82 BMW 135i 135is 1M Coupe
2006-2011 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 335i 335is - Convertible
2007-2010 E60 BMW 535i 535xi 535i xDrive
2012+ F12 BMW 640i 640i xDrive
2013+ F06 BMW 640i Gran Coupe 640i xDrive Gran Coupe
2013+ F01 BMW 740i 740li 740li xDrive i
2013+ E84 BMW X1 xDrive35i
Genuine BMW
Part #: 11427573212
Price: $120.50 (USD) 
$153.34 (21% off MSRP)
In Stock
Free Shipping Free Shipping