Track Safety for BMW E9 3.0CS M30 3.0L

Clear BMW chassis
If you're like us, then you enjoy taking your vehicle to the track whenever you get a chance. Whether you have a fully built track slayer or if you just enjoy taking your daily driver to autocross events, Turner Motorsport carries what you need to pass tech and, more importantly, keep yourself safe in the event of an accident.

H3R Performance HalGuard™ Clean Agent 2.5lb Fire Extinguisher - Black
H3R Performance - Corporate Logo
T#:402686
Part#: HG250B
In Stock
$224.95
Free Shipping

Track days can come to an abrupt ending when dealing with a vehicle fire. Causes can range from flammable fluids, such as leaking fuel, or overheating electronics and electrical shorts. Regardless of the cause, this can cause thousands of dollars of damage and can potentially become an immediate, life-threatening hazard if not properly handled. The best way to ensure your safety is to have a fire extinguisher on board that is made to put out any fires quickly and efficiently. You must also be certain that it is reliable enough to get the job done in an emergency. H3R Performance builds high quality extinguishers that feature strong steel cylinders, all metal valve construction, and aviation-quality steel mounting brackets all to make certain that this life saving device will function perfectly, without the worries of weak plastic valves or internals.

The HalGuard™ Clean Agent Extinguisher was specifically designed to combat fires in situations and places that water would only make worse, such as a fuel fire or electrical fires. These extinguishers contain Halotron® 1, an electrically non-conductive "clean" extinguisher that rapidly turns into gas and leaves behind no damaging residue that would need to be cleaned up and is environmentally friendly. Thanks to its liquid to gas evaporation, it can get in to hard to reach areas to properly extinguish any and all fire sources. It has also be extensively tested by the military and FAA for its fire fighting ability and is now the main extinguisher used at airports around the world.

Features:

  • No thermal shock to electronics
  • No mess or damage to vehicle or surfaces
  • Liquefied gas extinguishes hard-to-reach fires
  • Does not impair operator's vision
  • EPA approved
  • Listed and rated 2B:C by Underwriters Laboratories
  • Rechargeable
  • Made in U.S.A.
  • 2-strap mounting bracket
  • 6' - 10' discharge range
  • High quality steel cylinders
  • All metal valve construction
  • Compact, lightweight, easy to use
  • Five year limited warranty

Specifications:

  • Extinguishing Agent  --  Halotron® 1
  • Agent (lb.)  --  2.5
  • Gross Weight (lb.)  --  5.4
  • U/L Rating  --  2 B:C
  • Height (inches)  --  14.8
  • Width (inches)  --  5.0
  • Depth-diameter (inches)  --  3.0
GT3 FIA Approved Racing Seat
Sabelt - Corporate Logo
T#:553647
Part#: RFSEGT3N
Direct Ship
$690.00
$690.00

The GT3 is Sabelts' top-selling model. designed with an eye towards comfort, this seat provides support in all the right areas to make sure back and leg strain is reduced as much as possible. What you have is a seat that is just as comfortable on the track as it is on the interstate.

The shell is made from a lightweight gel-coated composite that holds the driver and protects along the sides of the seat as well. Moving further down the seat, the back is covered in  VEP fabric with high-density foam cells that support and absorb vibration. Leg bolstering is extra deep and will keep you in an upright and stable position and the VEP fabric covering ensures long-lasting durability. The seat pad is removable which makes swapping and/or cleaning a breeze,  and finally, a crotch strap hole in the bottom of the shell makes this seat compatible with 6-point harnesses.

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety. 

Brey-Krause Quick Release Fire Extinguisher Mount - 3"
Brey-Krause - Corporate Logo
T#:396272
Part#: R-9520
Ships in 3 Business Days
$241.50
Free Shipping

The Brey-Krause "Quick Release" Fire Extinguisher Mount is exquisitely CNC machined from T6 6061 billet aluminum and clear anodized for durability. The part design allows the fire extinguisher to be released from the bracket with one hand when time is of the essence. The bracket attaches to all existing fire extinguisher mounts and includes stainless steel hardware. 

Mount holds any 3" fire extinguisher


RaceQuip 5 Point Latch And Link 3" Racing Harness - SFI 16.1 Approved
Racequip - Corporate Logo
T#:403220
Part#: 7110XX5PT
In Stock
Starting at $69.95
Starting at $69.95

Racing harnesses are required at any respectable track or strip, but they tend to run upwards of hundreds of dollars. RaceQuip designs and builds safety equipment for just this issue! Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

This Standard 5 Point Latch and Link Racing harness is RaceQuips most popular racing harness, priced at $74.99 or below while still being fully SFI 16.1 Approved.

All harness systems are constructed using drop-forged steel hardware for ultimate strength and reduced weight. All hardware is cadmium plated for added protection. They use only 3" premium polyester webbing and all belts are box-x pattern sewn to ensure uniform stitch length and strength. Belts and hardware are routinely tested to verify compliance with SFI 16.1 standards.

All of their  harness sets feature a latch & link system to retain the belts. The latch & link system is distinguished by a pivoting "hammer," called a Duckbill, which locks all of the belts into place by snapping down into a detent. Both shoulder belts and the sub belt are hooked over the link; the link is inserted into the latch; the Duckbill is then brought down into and over the link, securely holding all of the pieces in place.

RaceQuip Latch & Link Harness Systems come as a "pull down" design. This means that the lap belts must be pulled down and away from the center latch mechanism to tighten.  Since their belts are "double adjustable", lengths are easily adjusted on either end for ease of installation. Using the included three bar slide you can mount the belts by either wrapping them around a rollbar or by bolting them in place. Snap-in ends and eyebolts are sold separately if you want to install your belts in that manner.

Features and Specifications:

  • Exceeds SFI 16.1 Rating (SFI Tags Affixed)
  • NOT D.O.T. / FMVSS Certified for On Highway Use
  • Premium 3" Polyester Webbing
  • Twin Individual Shoulder Belts
  • Pull Down Style Lap Belt
  • 5 Point Design - Single 2" Crotch Sub Strap
  • 3" Hardware Ends Installed 
  • Double Adjustable for Ease of Installation
  • Wrap Around or Bolt-in Mounting
  • Drop-Forged Steel Hardware (no bolts)
  • Shoulders Adjust from 20" to 62"
  • Lap Belt Adjusts 20" to 60"
  • Available in Black, Red, Blue, Yellow, Orange, Purple, Platinum, Green and Pink
  • Can Be Re-webbed (SFI) Upon Expiration

Sabelt FIA Approved 6-Point Saloon Rally Racing Harness
Sabelt - Corporate Logo
T#:552831
Part#: SAFIACCS3
Direct Ship
Starting at $295.00
Starting at $295.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety. 

Sabelt FIA approved racing harnesses are designed in a variety of configurations to suit your exact need and vehicle. Found in some of the fastest competition vehicles in the world, you can rest assured that you're being held securely by some of the finest belts available. Made by hand in Italy, quality and consistency are second to none. Whether you choose a four or six point, with aluminum or steel hardware each belt is designed to hold up to the rigors of the racetrack and to perform flawlessly in the event of a collision.

Features:

  • Shoulder straps: full 3’’ width - aluminum lightweight adjuster 
  • Shoulder fixing: snap hook - tribar 
  • Lap belts: full 3’’ width - aluminum lightweight adjuster Pull Up-snap hook fixing  
  • New compact buckle designed with crotches slots integrated to main body 
  • Crotch straps: 2’’ width - snap hook / tribar fixing
Rennline Battery Disconnect Switch - 6 Pole W/ Removable Key
Rennline - Corporate Logo
T#:557145
Part#: EL-28606
In Stock
$44.45
Free Shipping

The Rennline 6 Pole Cut Off Switch is the same style used in the factory Porsche Cup Cars. It has been designed to eliminate the possibility of the alternator circuit being damaged due to a heavy voltage surge that can occur with the use of a heavy duty single circuit On/Off Switch. When turned to the off position the engine will be automatically stopped due to the secondary switch function whereby the ignition is cut. This prevents engine 'run on' and is a vital safety factor especially in competition use. This switch is also a very simple and effective anti theft device for cars, trucks, boats and Ag, vehicles. 

Features and Specs:

  • 12-24 Volt
  • Prevents battery drain
  • 3 OHM 11 Watt resistor for controlled earth leakage
  • Fully removable key
  • Waterproof lock cover
  • Continuous current 100 amps
  • 500 Amp Peak for 5 seconds
  • Size 67mm
  • Copper cable fittings with M10 Studs

Sabelt FIA Approved 6-Point Saloon Racing Harness
Sabelt - Corporate Logo
T#:552657
Part#: SAFIACCA2
Direct Ship
Starting at $460.00
Starting at $460.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety. 

Sabelt FIA approved racing harnesses are designed in a variety of configurations to suit your exact need and vehicle. Found in some of the fastest competition vehicles in the world, you can rest assured that you're being held securely by some of the finest belts available. Made by hand in Italy, quality and consistency are second to none. Whether you choose a four or six point, with aluminum or steel hardware each belt is designed to hold up to the rigors of the racetrack and to perform flawlessly in the event of a collision.

Features:
Shoulder straps: full 2’’ width - aluminum lightweight adjuster 
Shoulder fixing: snap hook - tribar 
Lap belts: full 2’’ width - aluminum lightweight adjuster Pull Up – snap hook fixing 
New compact buckle designed with crotches slots integrated to main body 
Crotch straps: 2’’ width - snap hook / tribar fixing

Sabelt Diamond Racing Glove - Red
Sabelt - Corporate Logo
T#:552915
Part#: SATG7R
Direct Ship
Starting at $145.00
Starting at $145.00

A proper pair of racing gloves can make all the difference on your next track day or autocross event. Aside from the obvious protection they afford in an unfortunate situation, the grip and increase in control is a welcomed addition when you're wrestling the car around a complex corner or cone section. 

The Diamond TG-7 glove is stylish option with up to the minute design and is easily customized with sponsorship or team logos. External stitching on the palm and finger give unrivaled comfort for those long stints and the elasticated wrist keeps them securely in place without the added bulk of velcro or straps. Palm and finger grips give excellent tactile control while easing the fatigue that can be felt from firmly holding the steering wheel for an extended period of time. 

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety. 


Sabelt FIA Approved 6-Point Saloon Rally Racing Harness
Sabelt - Corporate Logo
T#:552658
Part#: SAFIACCA3
Direct Ship
Starting at $460.00
Starting at $460.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety. 

Sabelt FIA approved racing harnesses are designed in a variety of configurations to suit your exact need and vehicle. Found in some of the fastest competition vehicles in the world, you can rest assured that you're being held securely by some of the finest belts available. Made by hand in Italy, quality and consistency are second to none. Whether you choose a four or six point, with aluminum or steel hardware each belt is designed to hold up to the rigors of the racetrack and to perform flawlessly in the event of a collision.

Features:

  • Shoulder straps: full 3’’ width - aluminum lightweight adjuster 
  • Shoulder fixing: snap hook - tribar 
  • Lap belts: full 3’’ width - aluminum lightweight adjuster Pull Up-snap hook fixing 
  • New compact buckle designed with crotches slots integrated to main body 
  • Crotch straps: 2’’ width - snap hook / tribar fixing

Sabelt Hero Racing Shoe - Black
Sabelt - Corporate Logo
T#:552897
Part#: SATB9B
Direct Ship
Starting at $295.00
Starting at $295.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety. 

The Hero TB-9 racing shoe is a modern take on a classic design. With a full leather upper sole with perforations for added ventilation, this shoe is made to be worn for a long period of time, such as endurance racing. The sole of these shoes are specially designed to allow maximum dexterity and pedal feel, while the slim profile allows the driver to move across the pedals unhindered. An FIA 8856-2000 Homolgation allows these shoes to be used in motorsport.

Sabelt Hero Racing Gloves - Red
Sabelt - Corporate Logo
T#:552910
Part#: SATG9R
Direct Ship
Starting at $190.00
Starting at $190.00

A proper pair of racing gloves can make all the difference on your next track day or autocross event. Aside from the obvious protection they afford in an unfortunate situation, the grip and increase in control is a welcomed addition when you're wrestling the car around a complex corner or cone section. Furthermore, depending on what type of racing you do or what track you are at, proper gloves may be requirement of entry. 

The TG-9 glove is a classic and simple design for those that want improved safety and grip without excess bulk. Silicon lining on the palm and fingers gives a "tacky" grip of the wheel without any loss of dexterity. The elasticated wrist gives a secure fit without the need for straps of velcro and the external stitching in the fingers and palm make this a glove that will be comfortable for however long your stint may be. 

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety. 

Sabelt Diamond Racing Glove - Blue
Sabelt - Corporate Logo
T#:552916
Part#: SATG7BL
Direct Ship
Starting at $145.00
Starting at $145.00

A proper pair of racing gloves can make all the difference on your next track day or autocross event. Aside from the obvious protection they afford in an unfortunate situation, the grip and increase in control is a welcomed addition when you're wrestling the car around a complex corner or cone section. 

The Diamond TG-7 glove is stylish option with up to the minute design and is easily customized with sponsorship or team logos. External stitching on the palm and finger give unrivaled comfort for those long stints and the elasticated wrist keeps them securely in place without the added bulk of velcro or straps. Palm and finger grips give excellent tactile control while easing the fatigue that can be felt from firmly holding the steering wheel for an extended period of time. 

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety. 



Sabelt Hero Racing Shoe - White
Sabelt - Corporate Logo
T#:552900
Part#: SATB9WH
Direct Ship
Starting at $295.00
Starting at $295.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety. 

The Hero TB-9 racing shoe is a modern take on a classic design. With a full leather upper sole with perforations for added ventilation, this shoe is made to be worn for a long period of time, such as endurance racing. The sole of these shoes are specially designed to allow maximum dexterity and pedal feel, while the slim profile allows the driver to move across the pedals unhindered. An FIA 8856-2000 Homolgation allows these shoes to be used in motorsport.

Sabelt Hero Racing Gloves - White
Sabelt - Corporate Logo
T#:552914
Part#: SATG9W
Direct Ship
Starting at $190.00