BMW Suspension Bushings & Mounts for BMW E9 (1969-1974) 3.0CS M30 3.0L

Clear BMW chassis
Suspension mounts are designed to absorb the energy of the shocks and springs and isolate road harshness from the chassis. But over time the original rubber mounts will crumble and fail. We have stock mounts and bushings as well as a wide selection of upgraded and heavier-duty for performance street cars. We also offer a full selection of race only bushings and mounts. Simply choose your car below. Included here you will find rear shock tower mounts, front strut mounts, subframe mounts, lower control arm bushings, rear trailing arm bushings, and more.

Powerflex Performance Polyurethane Rear Trailing Arm Bushing Set - E1X, E2X, E3X Non-M
Powerflex Performance Polyurethane Rear Trailing Arm Bushing Set - E...
RTABs play a key role in connecting the wheels to the cha...
Powerflex - Corporate Logo
T#:376395
Part#: PFR5-306X4
In Stock
$164.99
Free Shipping

RTABs play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.

OEM Sachs Trailing Arm Bushing Pair - E30 E10 E12 E21 E23 E24, E28 528e, E36 318ti
OEM Sachs Trailing Arm Bushing Pair - E30 E10 E12 E21 E23 E24, E28 5...
OEM quality rear suspension bushing replacement. This bus...
Sachs - Corporate Logo
T#:370564
Part#: 33329061945
In Stock
$15.95
Free Shipping on orders $99 and up

OEM quality rear suspension bushing replacement. This bushing is a common cause of noise in the rear.

Bushing Diameter: 30MM

Powerflex Performance Polyurethane Rear Trailing Arm Bushing Set - E10, E12,E21, E23, E24, E28, E3, E9, E30, E36 Non-M
Powerflex Performance Polyurethane Rear Trailing Arm Bushing Set - E...
Rear trailing arm bushings serve the key purpose of keepi...
Powerflex - Corporate Logo
T#:378997
Part#: PFR5-306GX4
In Stock
$229.99
Free Shipping

Rear trailing arm bushings serve the key purpose of keeping rear suspension triangulated and the vehicle moving where it's directed to. Though failure prone, even factory-fresh OEM rubber bushings allow for deflection, causing suspension geometry changes on hard launches, over bumps in the road, and during cornering. This deflection results in clunking in the rear end, a aEURoerear steeraEUR feeling, and uneven tire wear.
Powerflex polyurethane rear trailing arm bushings are firmer than OEM bushings, resulting in a reduction of deflection that causes these suspension angle changes, improving handling over bumps and with a proper alignment, extending tire wear.

Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.


Urethane Rear Trailing Arm Bushings E12 E24 E30 Z3 E36 318ti
Urethane Rear Trailing Arm Bushings E12 E24 E30 Z3 E36 318ti ...
Want to keep the rear end of your BMW more planted and ti...
CATuned - Corporate Logo
T#:397186
Part#: TRLMOUNTBUSH
In Stock
$69.99
$69.99
Want to keep the rear end of your BMW more planted and tighten up the handling without breaking the bank or your back? These urethane bushings are stiff enough to improve performance and locate the trailing arms better without being too hard and rough for street use. Two-piece design makes installation easy. Made in the USA.

Race Polyurethane Rear Trailing Arm Bushing Set, Adjustable - E10, E12, E21, E23, E24, E3, E9, Z3, E30, E28, E36
Race Polyurethane Rear Trailing Arm Bushing Set, Adjustable - E10, E...
Trailing arm bushings play a key role in connecting the w...
Powerflex Black Series - Corporate Logo
T#:376462
Part#: PFR5-306GBX4
Direct Ship
$253.99
Free Shipping

Trailing arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.

Race Polyurethane Rear Trailing Arm Bushing Set, Non Adjustable - E10, E12, E21, E23, E24, E3, E9, Z3, E30, E28, E36
Race Polyurethane Rear Trailing Arm Bushing Set, Non Adjustable - E1...
Trailing arm bushings play a key role in connecting the w...
Powerflex Black Series - Corporate Logo
T#:376482
Part#: PFR5-306BX4
Direct Ship
$181.99
$181.99

Trailing arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.



Rear Solid Subframe Mounts - E9 E3 E12 E24 uo to 09/1982
Rear Solid Subframe Mounts - E9 E3 E12 E24 uo to 09/1982
Building your classic BMW into a track car? Replace your ...
Ireland Engineering - Corporate Logo
T#:567292
Part#: E9E3SSBUSH
Direct Ship
New Item
$145.00
$145.00

Building your classic BMW into a track car? Replace your rubber subframe bushings with these solid mounts from BMW. Be advised that substantial noise and vibration should be expected.

Fits the Following BMWs:

E9
E3
E12
E24 up to 09/1982

Urethane Rear Subframe Mounts - E9 E3 E12 E24 Early
Urethane Rear Subframe Mounts - E9 E3 E12 E24 Early
These bushings from Ireland Engineering are a great repla...
Ireland Engineering - Corporate Logo
T#:559330
Part#: E9SUBFRAMEMOUNTS
Direct Ship
New Item
$220.00
$220.00

These bushings from Ireland Engineering are a great replacement for your worn-out rubber bushings, significantly stiffening your subframe without being too stiff or making the ride unnecessarily rough.

Fits the Following BMWs:

E3
E9
E12
E24 up to 09/1982