Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW E91 Thermostats

BMW E91 Thermostats BMW thermostats. Don't take chances! Proper maintenance is required to keep your car performing at peak levels. The thermostat basically controls when your car will overheat. Don't let it fail on you. We carry both OEM BMW thermostats and low temp aftermarket BMW thermostats for use in hot climates or track/race use
You're currently viewing parts for your (E91) 3-Series Touring 2006-2013. Reset your chassis
For accurate results, specify your model below.
Water Pump and Thermostat Package - N51/N52 Engine - E82 128i, E9X 325i/328i/330i, E60 528i This packages covers the major components you would install along with a new water pump or thermostat. On the N51/N52 cars (128i, 325i 328i, 330i, 525i, 528i, 530i) the water pump and theremostat are mounted together. In fact, to get to the thermostat, BMW expects you to remove the water pump. This package covers the whole job. With the electric water pump now an integral part of the efficiency and performance of the engine, staying on top of its maintenance and replacement is the smart thing to do.

Our water pump/thermostat overhaul includes:
  • OEM electric water pump, p/n 11517586925.
  • aluminum mounting screws for water pump (set of 3), p/n 11510392553
  • OEM Behr thermostat, p/n 11537549476
  • Original BMW connecting hose from thermostat to water pump, p/n 11537521049
  • OEM-style hose clamps for hose (x 2)
    BUY AS A PACKAGE AND SAVE $$!

    The water pump on the N52 engine has more cooling responsibilities than ever before. Not only must it provide cooling for the engine, but it's also pumping fluid used to cool the automatic transmission oil. The good news is that the pump only works when, and only as much, as it needs to. The engine computer dictates how much fluid needs to be pumped through the system depending on the load. That means the system can actually stop the pump when warmer temperatures are needed. No longer is the pump spinning all the time from an engine-driven belt. The bad news is that it's now an electrical part, so a failure is usually immediate and with no warning. And if the electronics are at fault, there is no way to rebuild or repair it. Fortunately, the engine computer will force a shut down or reduce power if a problem occurs, preventing catastrophic engine damage.

    How to avoid a water pump failure in the future? Replacing the water pump as part of a regular interval schedule will ensure you always have a functioning pump in place. Since this technology is relatively new for BMW, therefore the lifecycle of the pump isn't yet known, we have been recommending replacement every 80-100k miles. This package of OE/OEM parts covers everything with Original BMW coolant offered to finish off the job. A proper bleeding procedure must be followed with the new electric pump.

    This water pump package fits the following BMWs with the N51/N52 engine:
    2008-2013 E82 BMW 128i
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive - Coupe
    2007-2013 E93 BMW 328i - Convertible
    2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive
    2006-2010 E83 BMW X3 3.0i X3 3.0si
    2006-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
    2009+ Z4 BMW Z4 sDrive30i
    2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
  • Packaged by Turner
    Part #: TMS206099
    Price: $366.28 (USD) 
    $385.56 (Sale - Save 5%)
    Direct Ship
    Free Shipping Free Shipping
    Genuine BMW Thermostat - 11537549476 - N52 N54

    Engine running a little hot or is the temp gauge not telling you anything? The thermostat might be the likely problem. Many cooling issues start with the thermostat. This is electronically controlled by the engine computer based on the cooling demands from the engine. And cooling components are working harder than ever. Engine performance is also dependent on temperature - as temperatures rise and pass a certain threshold the engine computer will begin reducing power. Stay on top of your cooling maintenance by replacing critical components preventatively. This replacement thermostat fits many of the N51 N52 N53 N54 6 cylinder engines and is an OEM Behr part.  

    The thermostat is located along with the water pump on the side of the engine. To gain access for removal you may need to remove the water pump as well. If the water pump is removed you MUST replace its mounting bolts. You can add them from the options below. We also have a bundled package that includes the water pump, mounting screws, connecting hose, and clamps if you want to replace everything together (recommended).  

    For the following BMW engines:
    N54 N52

    Genuine BMW
    Part #: 11537549476
    Price: $109.79 (USD) 
    $145.97 (25% off MSRP)
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Mishimoto 74 Degree Performance Thermostat - N52 N54 N55

    The thermostat regulates the temperature of your coolant. At a predetermined temperature the thermostat will open to let coolant flow to the radiator and be cooled by airflow or the fan. Over time the thermostat will become stuck open or closed, leading to a variety of issues. A closed thermostat will never allow the coolant to reach the radiator and be cooled. Hot coolant will continue to circulate through the engine and absorb even more heat until boiling and the system overheats. An open thermostat is not as bad but is still not ideal - the coolant is always cool, with the temp needle always reading in the cool range. This tells the ECU to richen the fuel mixture to bring the car up to normal operating temp. So your fuel mileage decreases and the car runs rich.   

    Replacing the thermostat is an easy but messy job. This thermostat includes the main o-ring (but a housing gasket may be required). Consider replacing the housing and any associated temp sensors while you're in there. The cooling system will need to be bled after.   

    Anything and everything BMW is the mantra at Active Autowerke. Since 1981 they have been serving the BMW community with custom turbocharger kits to a myriad of other innovative and inspiring performance parts.

    For vehicles with plastic thermostat housing 

      

    Mishimoto
    Part #: MMTS-E90-07
    Price: $60.00 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    OEM Mahle-Behr Thermostat - E82 E9X E60 X3 Z4 with N52 N54 engines Engine running a little hot or is the temp gauge not telling you anything? The thermostat might be the likely problem. Many cooling issues start with the thermostat. This is electronically controlled by the engine computer based on the cooling demands from the engine. And cooling components are working harder than ever. Engine performance is also dependent on temperature - as temperatures rise and pass a certain threshold the engine computer will begin reducing power. Stay on top of your cooling maintenance by replacing critical components preventatively. This replacement thermostat fits many of the N51 N52 N53 N54 6 cylinder engines and is an OEM Behr part. 

    The thermostat is located along with the water pump on the side of the engine. To gain access for removal you may need to remove the water pump as well. If the water pump is removed you MUST replace its mounting bolts. You can add them from the options below. We also have a bundled package that includes the water pump, mounting screws, connecting hose, and clamps if you want to replace everything together (recommended). 

    This thermostat fits the following BMWs:
    2008+  E82  BMW 128i 135i
    2007+  E9X  BMW 325i 325xi 328i 328xi 330i 335i 335xi
    2006+  E60  BMW 525i 525xi 528i 528xi 530i 530xi 535i 535xi
    2006+  X3  BMW X3 3.0i X3 3.0si
    2006+  Z4  BMW Z4 3.0i Z4 3.0si
    Mahle-Behr
    Part #: 11537549476
    Price: $64.53 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity: