BMW Seat Belts and Racing Harnesses for BMW 3 Series E91 (2006-2012)

Clear BMW chassis
The advantage of racing harnesses cannot be understated. Aside from the obvious improvement to your safety, harnesses keep your body planted in the seat and allow a much more confident and focused driving experience. Without your body strapped in you're constantly fighting to keep youself planted in the seat and these forces distract you from controlling the car. It also prevents you from getting and maintaining the ideal leverage point for working the steering wheel and pedals. Turner Motorsports offers several harness and seat belt accessories to make the use of harness belts easier.

RaceQuip 5 Point Latch And Link 3" Racing Harness - SFI 16.1 Approved
Racequip - Corporate Logo
T#:403220
Part#: 7110XX5PT
In Stock
Starting at $69.95
Starting at $69.95

Racing harnesses are required at any respectable track or strip, but they tend to run upwards of hundreds of dollars. RaceQuip designs and builds safety equipment for just this issue! Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

This Standard 5 Point Latch and Link Racing harness is RaceQuips most popular racing harness, priced at $74.99 or below while still being fully SFI 16.1 Approved.

All harness systems are constructed using drop-forged steel hardware for ultimate strength and reduced weight. All hardware is cadmium plated for added protection. They use only 3" premium polyester webbing and all belts are box-x pattern sewn to ensure uniform stitch length and strength. Belts and hardware are routinely tested to verify compliance with SFI 16.1 standards.

All of their harness sets feature a latch & link system to retain the belts. The latch & link system is distinguished by a pivoting "hammer," called a Duckbill, which locks all of the belts into place by snapping down into a detent. Both shoulder belts and the sub belt are hooked over the link; the link is inserted into the latch; the Duckbill is then brought down into and over the link, securely holding all of the pieces in place.

RaceQuip Latch & Link Harness Systems come as a "pull down" design. This means that the lap belts must be pulled down and away from the center latch mechanism to tighten. Since their belts are "double adjustable", lengths are easily adjusted on either end for ease of installation. Using the included three bar slide you can mount the belts by either wrapping them around a rollbar or by bolting them in place. Snap-in ends and eyebolts are sold separately if you want to install your belts in that manner.

Features and Specifications:

  • Exceeds SFI 16.1 Rating (SFI Tags Affixed)
  • NOT D.O.T. / FMVSS Certified for On Highway Use
  • Premium 3" Polyester Webbing
  • Twin Individual Shoulder Belts
  • Pull Down Style Lap Belt
  • 5 Point Design - Single 2" Crotch Sub Strap
  • 3" Hardware Ends Installed
  • Double Adjustable for Ease of Installation
  • Wrap Around or Bolt-in Mounting
  • Drop-Forged Steel Hardware (no bolts)
  • Shoulders Adjust from 20" to 62"
  • Lap Belt Adjusts 20" to 60"
  • Available in Black, Red, Blue, Yellow, Orange, Purple, Platinum, Green and Pink
  • Can Be Re-webbed (SFI) Upon Expiration
Racing Seat Belt Harness Retaining Guide Collars (Pair)
Turner Motorsport - Corporate Logo
T#:339005
Part#: TIN9903150
In Stock
Starting at $79.90
Free Shipping on orders $99 and up
These little guys are one of our favorite final touches on a race car build. After years of requests, we now are able to supply these for more than just our race team's use. These aluminum collars bolt on your roll cage's harness bar (or any bar for that matter) and help keep your seat belt harnesses from sliding on the bar. You can use just one pair to accomplish this, or 2 pairs (4 collars total) for the best looking and functioning install. The beauty of these collars (besides being lightweight and looking clean) is that they can be adjusted from side to side, which is convenient if you change you seat or belt configuration. They can also be used for other applications as well, such as taming that helmet net strap. If you're looking for a clean, professional looking solution, these are a superb final touch. As used on our own Championship winning TMS E46 and E90 race cars.

We offer these guide collars in two sizes: for 1.5" OD roll bar tubing or for 1.75" OD roll bar tubing (choose your size below). Check your cage tubing diameter especially if your car was built in Europe as they used metric tubing sizes. If you need a metric size, contact us. Also measure with paint applied, not bare tubing. These are sold by the pair, so be sure to modifying your quantity below (or in the cart) if you need them for both seats.
Schroth Racing 2 Inch Harness Pads
Schroth - Corporate Logo
T#:390796
Part#: SR-2IN-PADS
In Stock
Sale - Save 15% $31.95
Starting at $27.16
Sale - Save 15% $31.95
Starting at $27.16
Cushioned pads that cover the 2" shoulder belts so they don't dig into your shoulders. These pads simply cover the belts and fasten with a zipper. Available in multiple colors with a "Schroth Racing" patch sewn on (flip the pad over if you don't want the logo showing). These can even be used on stock 3-point seatbelts to prevent the belt from rubbing against your neck. Sold as a pair of pads (enough to fit one racing harness).

Brey-Krause Clip in Harness mount - Passenger
Brey-Krause - Corporate Logo
T#:396282
Part#: R-9288
In Stock
$79.95
Free Shipping on orders $99 and up
This Mount is bolts to the OE lap belt mount on the passenger side to provide a clip in point for clip in style harness's.

Sabelt FIA Approved 6-Point Saloon Rally Racing Harness
Sabelt - Corporate Logo
T#:552831
Part#: SAFIACCS3
Direct Ship
Starting at $295.00
Starting at $295.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Sabelt FIA approved racing harnesses are designed in a variety of configurations to suit your exact need and vehicle. Found in some of the fastest competition vehicles in the world, you can rest assured that you're being held securely by some of the finest belts available. Made by hand in Italy, quality and consistency are second to none. Whether you choose a four or six point, with aluminum or steel hardware each belt is designed to hold up to the rigors of the racetrack and to perform flawlessly in the event of a collision.

Features:

  • Shoulder straps: full 3aEURtmaEURtm width - aluminum lightweight adjuster
  • Shoulder fixing: snap hook - tribar
  • Lap belts: full 3aEURtmaEURtm width - aluminum lightweight adjuster Pull Up-snap hook fixing
  • New compact buckle designed with crotches slots integrated to main body
  • Crotch straps: 2aEURtmaEURtm width - snap hook / tribar fixing
Sabelt FIA Approved GT Racing Harness
Sabelt - Corporate Logo
T#:552640
Part#: SAFIACFC1
Direct Ship
Starting at $550.00
Starting at $550.00

Sabelt FIA Approved 6-Point Saloon Racing Harness
Sabelt - Corporate Logo
T#:552657
Part#: SAFIACCA2
Direct Ship
Starting at $460.00
Starting at $460.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Sabelt FIA approved racing harnesses are designed in a variety of configurations to suit your exact need and vehicle. Found in some of the fastest competition vehicles in the world, you can rest assured that you're being held securely by some of the finest belts available. Made by hand in Italy, quality and consistency are second to none. Whether you choose a four or six point, with aluminum or steel hardware each belt is designed to hold up to the rigors of the racetrack and to perform flawlessly in the event of a collision.

Features:
Shoulder straps: full 2aEURtmaEURtm width - aluminum lightweight adjuster
Shoulder fixing: snap hook - tribar
Lap belts: full 2aEURtmaEURtm width - aluminum lightweight adjuster Pull Up aEUR" snap hook fixing
New compact buckle designed with crotches slots integrated to main body
Crotch straps: 2aEURtmaEURtm width - snap hook / tribar fixing

RaceQuip 5 Point Latch And Link HANS/HNR Racing Harness - SFI 16.1 Approved
Racequip - Corporate Logo
T#:403240
Part#: RQ5PTHANSHNR
Direct Ship
Starting at $89.95
Starting at $89.95

Racing harnesses are required at any respectable track or strip, but they tend to run upwards of hundreds of dollars. RaceQuip designs and builds safety equipment for just this issue! Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

The HANS/HNR harness set has narrow shoulder belts to better fit a head & neck restraint (HNR) like a HANS device.

All harness systems are constructed using drop-forged steel hardware for ultimate strength and reduced weight. All hardware is cadmium plated for added protection. They use only 3" premium polyester webbing and all belts are box-x pattern sewn to ensure uniform stitch length and strength. Belts and hardware are routinely tested to verify compliance with SFI 16.1 standards.

All of their harness sets feature a latch & link system to retain the belts. The latch & link system is distinguished by a pivoting "hammer," called a Duckbill, which locks all of the belts into place by snapping down into a detent. Both shoulder belts and the sub belt are hooked over the link; the link is inserted into the latch; the Duckbill is then brought down into and over the link, securely holding all of the pieces in place.

RaceQuip Latch & Link Harness Systems come as a "pull down" design. This means that the lap belts must be pulled down and away from the center latch mechanism to tighten. Since their belts are "double adjustable", lengths are easily adjusted on either end for ease of installation. Using the included three bar slide you can mount the belts by either wrapping them around a rollbar or by bolting them in place. Snap-in ends and eyebolts are sold separately if you want to install your belts in that manner.

Features and Specifications:

  • Exceeds SFI 16.1 Rating (SFI Tags Affixed)
  • NOT D.O.T. / FMVSS Certified for On Highway Use
  • Premium 3" Polyester Webbing
  • Twin Individual Shoulder Belts
  • 2" Shoulder Accomodates HNR / HANS Device
  • Pull Down Style Lap Belt
  • 5 Point Design - Single 2" Crotch Sub Strap
  • Hardware Ends Installed
  • Double Adjustable for Ease of Installation
  • Wrap Around or Bolt-in Mounting
  • Drop-Forged Steel Hardware (no bolts)
  • Shoulders Adjust from 20" to 62"
  • Lap Belt Adjusts 20" to 60"
  • Available in Black, Red, and Blue
  • Can Be Re-webbed (SFI) Upon Expiration

Sabelt FIA Approved 6-Point Saloon Rally Racing Harness
Sabelt - Corporate Logo
T#:552658
Part#: SAFIACCA3
Direct Ship
Starting at $460.00
Starting at $460.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Sabelt FIA approved racing harnesses are designed in a variety of configurations to suit your exact need and vehicle. Found in some of the fastest competition vehicles in the world, you can rest assured that you're being held securely by some of the finest belts available. Made by hand in Italy, quality and consistency are second to none. Whether you choose a four or six point, with aluminum or steel hardware each belt is designed to hold up to the rigors of the racetrack and to perform flawlessly in the event of a collision.

Features:

  • Shoulder straps: full 3aEURtmaEURtm width - aluminum lightweight adjuster
  • Shoulder fixing: snap hook - tribar
  • Lap belts: full 3aEURtmaEURtm width - aluminum lightweight adjuster Pull Up-snap hook fixing
  • New compact buckle designed with crotches slots integrated to main body
  • Crotch straps: 2aEURtmaEURtm width - snap hook / tribar fixing

Sabelt ECE Approved 4-Point Clubman Belt
Sabelt - Corporate Logo
T#:552832
Part#: SACB2
Direct Ship
Starting at $168.00
Starting at $168.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Features:

  • 4 fixing points
  • Shoulder straps: 2" with steel adjusters
  • Lap belts: 2" with steel adjusters and clubman style buckle
  • Shoulder pads included
Sabelt FIA Approved 4-Point Saloon Racing Harness
Sabelt - Corporate Logo
T#:552669
Part#: SAFIACCS4
Direct Ship
Starting at $260.00
Starting at $260.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Sabelt FIA approved racing harnesses are designed in a variety of configurations to suit your exact need and vehicle. Found in some of the fastest competition vehicles in the world, you can rest assured that you're being held securely by some of the finest belts available. Made by hand in Italy, quality and consistency are second to none. Whether you choose a four or six point, with aluminum or steel hardware each belt is designed to hold up to the rigors of the racetrack and to perform flawlessly in the event of a collision.

Features:

  • Shoulder straps: full 3aEURtmaEURtm width - steel adjuster
  • Shoulder fixing: snap hook - tribar
  • Lap belts: full 3aEURtmaEURtm width aEUR" steel adjuster Pull Up - snap hook fixing
  • Buckle fixed to lap belt
Sabelt ECE Approved 4-Point Clubman Belt
Sabelt - Corporate Logo
T#:552830
Part#: SACB1
Direct Ship
Starting at $150.00
Starting at $150.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Features:

  • 4 fixing points
  • Shoulder straps: 2" with steel adjusters
  • Lap belts: 2" with steel adjusters and clubman style buckle
  • Shoulder pads included


Sabelt FIA Approved 6-Point Saloon Rally Racing Harness
Sabelt - Corporate Logo
T#:552660
Part#: SAFIACCS1
Direct Ship
Starting at $370.00
Starting at $370.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Sabelt FIA approved racing harnesses are designed in a variety of configurations to suit your exact need and vehicle. Found in some of the fastest competition vehicles in the world, you can rest assured that you're being held securely by some of the finest belts available. Made by hand in Italy, quality and consistency are second to none. Whether you choose a four or six point, with aluminum or steel hardware each belt is designed to hold up to the rigors of the racetrack and to perform flawlessly in the event of a collision.

Features:

  • Shoulder straps: full 3aEURtmaEURtm width - steel adjuster
  • Shoulder fixing: snap hook - tribar
  • aEUR
  • Lap belts: 2aEURtmaEURtm quick adjuster integrated to buckle tongue - Pull Down. Designed for GT/ Endurance
  • New compact buckle designed with crotches slots integrated to main body
  • Crotch straps: 2aEURtmaEURtm width - snap hook / tribar fixing