Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW E91 Suspension Bushings & Mounts

BMW E91 Suspension Bushings & Mounts Suspension mounts are designed to absorb the energy of the shocks and springs and isolate road harshness from the chassis. But over time the original rubber mounts will crumble and fail. We have stock mounts and bushings as well as a wide selection of upgraded and heavier-duty for performance street cars. We also offer a full selection of race only bushings and mounts. Simply choose your car below. Included here you will find rear shock tower mounts, front strut mounts, subframe mounts, lower control arm bushings, rear trailing arm bushings, and more.
You're currently viewing parts for your (E91) 3-Series Touring 2006-2013. Reset your chassis
For accurate results, specify your model below.
Race Polyurethane Rear Upper Shock Mount Set - E8X, E9X

Rear shock mounts are tasked with securing shocks while absorbing noise, vibration and harshness that would otherwise be associated with a solid mount. Factory rubber bushings are a compromise between a cushy ride and responsive handling.

Powerflex polyurethane rear shock mounts are firmer than OEM bushings, resulting in better handling, a more responsive rear-end, and more efficient suspension articulation - all with minimal sacrifice to ride quality.

Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.

This part fits the following BMWs:
E8X, E9X All

Powerflex Black Series
Part #: PFR5-416Bx2
Price: $74.99 (USD) 
In Stock
Quantity:   
3-series Strut/Shock Mount Kit - E9X Xi AWD New mounts should be installed whenever you are replacing the struts and shocks on your E90 and E92 3-series. The mounts keep the cabin isolated from annoying noises and impacts. Just like any other rubber mount, these will go bad over time, which allows more harshness and vibration to the chassis along with clunking noises. Replace them now to avoid doubling the labor charges down the road. When installing new shocks, that is the perfect time to also replace the mounts. There are no special tools required and don't take any extra time!

Included in the Xi Mount Kit:
  • front upper strut mounts (also known as a guide support), 31336775097 or 31306785962
  • A. rear upper-top shock mounts, 33506771737
  • B. rear upper-middle shock mounts, 33506767010
  • C. rear upper-bottom shock mounts, 33506771738
  • D. rear upper supporting cup, 33526764418 (sits over bumpstop)
  • rear lower shock mount (installs on spring arm), 33526768544
    Buy as a package and save $!! Select the kit that fits the production date of your car below.

    This item fits the following BMWs:
    2006-2011 E90 BMW 325xi 328xi 328i xDrive 330xi 335xi 335i xDrive - Sedan
    2006-2011 E91 BMW 325xi 328xi 328i xDrive - Wagon
    2007-2012 E92 BMW 328xi 328i xDrive 335xi 335i xDrive - Coupe
  • Packaged by Turner
    Part #: TMS11957
    Price: $188.70 (USD) 
    In Stock
    Free Shipping Free Shipping
    Genuine BMW Front Bump Stop - E9X xi Bump stops provide a bottoming cushion on rough roads, limiting hydraulic damper travel to prevent suspension bottoming and damage. They also improve ride quality, softening harsh impacts. Replace them when installing new struts.
    Genuine BMW
    Part #: 31336777636
    Price: $24.42 (USD) 
    $28.40 (14% off MSRP)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Genuine BMW Rear Upper Shock Mount, Bottom - 33506771738 Replace your shock mount each time you replace your shocks to reduce noise and vibrations from the road and suspension system. Failing shock mounts may also end up leading to knocking and rattling sounds coming from the rear suspension.
    Genuine BMW
    Part #: 33506771738
    Price: $20.70 (USD) 
    $24.46 (15% off MSRP)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    OEM Lemforder Guide Support/Strut Mount - Upper Part - E88 E82 E9X

    Strut mounts can begin to wear and fail over time, causing a knock in the suspension to occur. Replace yours with a high quality OEM Lemförder replacement to ensure a tight, noise-free ride.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Lemforder
    Part #: 33506771737
    Price: $14.95 (USD) 
    In Stock
    Quantity:   
    Powerflex Performance Polyurethane Rear Subframe Bushings - E82, E88, E90, E91, E92, E93 Non-M

    Tasked with keeping the vehicles rear end firmly mounted while absorbing noise, vibration, and harshness (NVH) factory rubber subframe bushings were engineered to provide a balance of control while keeping the ride quality soft and supple. As a factory bushings age, they become brittle and begin to harden. When this happens the bushing will actually shrink and allow excess play, or movement in the subframe. This is typically felt by a sudden jerk or "thunking" noise under acceleration and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushings with full polyurethane this play is eliminated since the subframe is being held in place by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering and acceleration inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver. 

    Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

    Powerflex
    Part #: PFR5-420x2
    Price: $188.99 (USD) 
    Direct Ship
    Free Shipping Free Shipping
    Quantity:   
    Rear Guide Rod, Upper Link Bushing - Outer - Group N Race Rubber - E82, E9X These are BMW Motorsport Group N Rear Outer bushings for the Guide Rod and Upper Link (Wishbone). This is a heavy-duty rubber that is stiffer than stock to resist deflection and twist in the arm. You'll have more stable handling and faster response in the suspension. These bushings are great for track use and legal for some racing classes yet can also be used on a street driven car where extra ride harshness can be tolerated.

    Sold as a set of 4 -
    2 Upper Link Outer Bushings,
    2 Guide Rod Outer Bushings

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
    2007-2013 E93 BMW 328i 335i - Convertible
    Genuine BMW Motorsport
    Part #: E9X-GPN-FOLB
    Price: $519.80 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Rear Lower Shock Mount - E9x, E82 This is the rear lower shock mount that mounts onto the spring arm on E9x 3 series and E82 1 series.

    This item fits the following BMWs:
    2008-2013 E82 BMW 128i 135i 135is Coupe
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
    2007-2013 E93 BMW 328i 335i 335is - Convertible
    Rein
    Part #: 33526768544
    Price: $28.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    OEM Lemforder Guide Support/Strut Mount - Lower Part - E88 E82 E9X

    Strut mounts can begin to wear and fail over time, causing a knock in the suspension to occur. Replace yours with a high quality OEM Lemförder replacement to ensure a tight, noise-free ride.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Lemforder
    Part #: 33506771738
    Price: $13.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    3-series Strut/Shock Mount Kit - E90, E91, E92, E93 (non M or Xi) Replacing your struts and shocks? Don't forget the bushings! The rubber mounts for the shocks will go bad over time, especially if you drive hard or the roads are particularly rough. The shock mounts locate the front struts and rear shocks to the car - providing a quiet and vibration-free buffer between the road and the cabin. Shock mounts and bushings can wear out just like any other rubber part on the car. This leads to more noise and harshness reaching the chassis and may complicate your new suspension install. When installing new shocks, that is the perfect time to also replace the mounts. There is no additional time to install them and no special tools are required! If you re-use the original mounts you have the risk of them failing before your next shock replacement, doubling your labor costs.

    Included in the E9X Mount Kit:
  • front upper strut mounts (also known as a guide support), 31306775098 (higher quality than 31336760943 strut mount)
  • A. rear upper-top shock mounts, 33506771737
  • B. rear upper-middle shock mounts, 33506767010
  • C. rear upper-bottom shock mounts, 33506771738
  • D. rear upper supporting cup, 33526764418 (sits over bumpstop)
  • rear lower shock mount (installs on spring arm), 33526768544
    Buy as a package and save $!!

    This item fits the following BMWs:
    2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
    2006-2011 E91 BMW 325i 328i - Wagon
    2007-2012 E92 BMW 328i 335i 335is - Coupe
    2007-2012 E93 BMW 328i 335i - Convertible
  • Packaged by Turner
    Part #: E9XMOUNTKIT
    Price: $176.65 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82, E9X (non-M) (Pair) A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 and E90/E91/E92/E93 consist of 4 pieces. These E9X URSM pieces fit all E82 and E9X except the M3 with EDC.

    Rear Shock Mount (RSM) Kit consists of:
    A. rear upper-top shock mounts, 33506771737
    B. rear upper-middle shock mounts, 33506767010
    C. rear upper-bottom shock mounts, 33506771738
    D. rear upper supporting cup, 33526764418 (sits over bumpstop)
    There is also a lower mount that is available separately. This package covers only the rear upper shock mounts.

    That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces for BOTH sides of the car.

    This item fits the following BMWs:
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
    2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
    2007-2012 E93 BMW 328i 335i - Convertible
    Packaged by Turner
    Part #: E9X-URSM
    Price: $50.90 (USD) 
    In Stock
    Quantity:   
    Powerflex Performance Polyurethane Rear Subframe Bushings - E8X, E9X

    Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

    Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

    Powerflex
    Part #: PFR5-422x2
    Price: $161.99 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Powerflex Performance Polyurethane Rear Control Arm Bushing Set - E8X, E9X Non-M

    Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

    Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

    Powerflex
    Part #: PFR5-411X2
    Price: $111.99 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Race Polyurethane Rear Subframe Bushings, Rear Position Set - E8X, E9X

    Tasked with keeping the vehicles rear end firmly mounted while absorbing noise, vibration, and harshness (NVH) factory rubber subframe bushings were engineered to provide a balance of control while keeping the ride quality soft and supple. As a factory bushings age, they become brittle and begin to harden. When this happens the bushing will actually shrink and allow excess play, or movement in the subframe. This is typically felt by a sudden jerk or "thunking" noise under acceleration and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushings with full polyurethane this play is eliminated since the subframe is being held in place by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering and acceleration inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver. 

    Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

    Powerflex Black Series
    Part #: PFR5-422Bx2
    Price: $178.99 (USD) 
    Direct Ship
    Quantity:   
    Race Polyurethane Subframe Inserts, Rear Position Set - E82, E88, E91

    Tasked with keeping the vehicles rear end firmly mounted while absorbing noise, vibration, and harshness (NVH) factory rubber subframe bushings were engineered to provide a balance of control while keeping the ride quality soft and supple. As a factory bushings age, they become brittle and begin to harden. When this happens the bushing will actually shrink and allow excess play, or movement in the subframe. This is typically felt by a sudden jerk or "thunking" noise under acceleration and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushings with full polyurethane this play is eliminated since the subframe is being held in place by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering and acceleration inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver. 

    Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

    This part fits the following BMWs:
    2008 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe
    2007- 2013 E88 1 Series Convertible 128i 135i
    2006 - 2009 E91 325xi 328i 328xi
    2009 - 2011 E91 328i 328xi 

     

    Powerflex Black Series
    Part #: PFR5-423Bx2
    Price: $91.99 (USD) 
    Direct Ship
    Quantity:   
    Rear Lower Link Arm Bushing - Inner - Group N Race Rubber - E82, E9X BMW Motorsport Group N rubber race bushings to replace the inner lower camber link arm bushings. These are a stiffer rubber version of the stock bushing - eliminating deflection and twist of the spring arm. This will result in a snappier feel and quicker response in the suspension and better handling. These bushings are great for track use and legal for some racing classes yet can also be used on a street driven car where extra ride harshness can be tolerated.

    Sold as a pair of bushings for both sides of the vehicle.

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
    2007-2013 E93 BMW 328i 335i - Convertible
    Genuine BMW
    Part #: E9X-GPN-RCSIB
    Price: $120.00 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    OEM Lemforder Front Ball Joint - E9X E84

    Ball joints begin to pop and rattle after a long period of wear and tear. An OEM Lemforder ball joint is the perfect replacement to ensure complete reliability eliminate any noises from the suspension.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Lemforder
    Part #: 31126768988
    Price: $48.32 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Powerflex Performance Polyurethane Rear Upper Control Arm Bushings - E8X, E9X

    Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control.

    Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

    Powerflex is the number one selling suspension bushing manufacturer in Europe. Their experience with polyurethane bushing material and state-of-the art manufacturing techniques allows them to produce premium performance bushings, made to exact-fit standards. Powerflex performance polyurethane bushings are built to last longer than OEM rubber bushings, while improving performance and allowing for a more engaging driving experience.

    Use of Powerflex Copper Grease PCG1 is recommended for ease of installation. Periodic reapplication is recommended to extend squeak-free service life of bushings.

    Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings.

    Powerflex is proud to offer a lifetime warranty to the original purchaser on all products.

    Powerflex
    Part #: PFR5-413x2
    Price: $150.99 (USD) 
    Direct Ship
    Free Shipping Free Shipping
    Quantity:   
    Powerflex Polyurethane Front Sway Bar Bushing Set - E82 E88 E9x

    Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

    Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

    Powerflex
    Part #: PFF5-4602-26.5x2
    Price: $65.99 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Turner Monoball Race Lower Rear Shock Mount - Pair - E88, E82, E9X

    Rubber mounts in any position of a vehicle are usually designed with comfort and longevity in mind leaving performance as a sacrifice. This kind of sacrifice here at Turner just won't do, so we did what we do best and designed a solid monoball mount.

    Our engineering team first wanted to tackle the issue with wear found on rubber mounts. Due to their combination of steel, rubber, and low mounting location, these mounts are a direct target for deterioration and failure. As they are positioned out in the open and exposed to the elements, bonded steel and rubber components inevitably hold moisture, separating as the steel bearing begins to rust. Our solution was to offer a rebuildable mount with a Teflon lined bearing for increased durability, combined with a blue anodized body and melonite coated bushing sleeves for corrosion resistance.

    The performance side of these mounts is primarily found in the articulation allowed by the bearing. Rubber mounts do not allow for proper free damper movement, hindering shock performance. By eliminating the deflection found in factory rubber mounts and allowing full shock articulation, this solid monoball design eliminates slop and maximizes shock efficiency and performance, allowing for more predictable handling on the street or the track - with almost zero added noise, vibration, and harshness.

     

    Replaces OE part #: 33526768544

     

    Key Benefits:

    • Monoball rear lower shock mount eliminates unwanted deflection, maximizing shock efficiency and performance.
    • Allows full shock body articulation for low friction movement and reduced side loading and improved shock wear.
    • Designed to work with stock non-M taper seat stud style shocks (not M eyelet mount type).
    • Maintains OE shock position

     

    Design features:

    • Rebuildable using off the shelf bearings - these are the last rear shock mounts you’ll need to buy
    • Includes new hardware
    • Made in USA

     

    Housing:

    • Billet CNC 6061-T6 aluminum housing, type II anodized for exceptional durability and corrosion resistance

     

    Bearing:

    • FK WSSX14T teflon lined spherical bearing
    • 440C heat-treated stainless steel ball, 1 ⅜” ball dia.
    • 17-4 PH heat-treated stainless steel race
    • Self-lubricating PTFE liners are chemically bonded to the inner diameter of the race to offer a very high load-carrying capacity with greatly increased dynamic wear characteristics.
    • Static Axial Load Rating: 10,800 lbs.
    • Rod End Misalign Angle: 6 degrees

     

    Bearing inserts:

    • CNC machined 1144 steel, heat treated and melonite coated designed to maximize ball articulation while offering exceptional durability and corrosion resistance.

     

    This item fits the following BMWs: 
    2008-2013 E82 BMW 128i 135i 135is Coupe 
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan 
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon 
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe 
    2007-2013 E93 BMW 328i 335i 335is - Convertible 

     

     

    Turner Motorsport
    Part #: 024572TMS03
    Price: $249.95 (USD) 
    Ships on Jul 24, 2018
    Free Shipping Free Shipping
    Quantity:   
    Powerflex Polyurethane Rear Upper Shock Mount Set - E82 E88 E9x

    Rear shock mounts are tasked with securing shocks while absorbing noise, vibration and harshness that would otherwise be associated with a solid mount. Factory rubber bushings are a compromise between a cushy ride and responsive handling.

    Powerflex polyurethane rear shock mounts are firmer than OEM bushings, resulting in better handling, a more responsive rear-end, and more efficient suspension articulation - all with minimal sacrifice to ride quality.
     

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers.

     

    NOTE: For vehicles without EDC

    Powerflex
    Part #: PFR5-416X2
    Price: $74.99 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Powerflex Polyurethane Rear Differential Front Position Bushing Set - E82 E88 E9x

    Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

    By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components. 

    Engineered to perform, Powerflex performance polyurethane differential bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

    Powerflex
    Part #: PFR5-425x2
    Price: $98.99 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Powerflex Performance Polyurethane Rear Subframe Rear Position Inserts - E82, E88, E91

    Tasked with keeping the vehicles rear end firmly mounted while absorbing noise, vibration, and harshness (NVH) factory rubber subframe bushings were engineered to provide a balance of control while keeping the ride quality soft and supple. As a factory bushings age, they become brittle and begin to harden. When this happens the bushing will actually shrink and allow excess play, or movement in the subframe. This is typically felt by a sudden jerk or "thunking" noise under acceleration and is a leading cause of "sloppy" or "loose" suspension feel. These poly inserts provide the inherent benefit of stiffness, which translates body forces much more directly. This means steering and acceleration inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver. 

    Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Engineered to perform, Powerflex performance polyurethane bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

    Powerflex
    Part #: PFR5-423x2
    Price: $82.99 (USD) 
    Direct Ship
    Free Shipping Free Shipping
    Quantity:   
    Genuine BMW Rear Upper Shock Mount, Upper - 33506771737 When replacing your shocks, it is always best to replace the shock mounts. This helps prevent excessive road noise and vibrations from the suspension and keeps anything from knocking or rattling. This is the top of the mount that threads onto the shock.
    Genuine BMW
    Part #: 33506771737
    Price: $20.70 (USD) 
    $24.46 (15% off MSRP)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Genuine BMW Spring Pad, Front Lower - 31336764372 - E82,E89,E90,E92,E93

    Cushions and dampens noise and vibrations from the front springs.


    Genuine BMW Spring Pad Lower
    This item fits the following BMW Chassis:
    E82 1M Coupe,E82,E89 Z4,E90,E92,E93

     

    Genuine BMW
    Part #: 31336764372
    Price: $6.71 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Race Polyurethane Front Control Arm Bushings, Rear Position Control Arm - E8X, E9X

    Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

    Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

    Powerflex Black Series
    Part #: PFF5-402Bx2
    Price: $203.99 (USD) 
    Direct Ship
    Free Shipping Free Shipping
    Quantity:   
    Race Polyurethane Rear Differential Bushings - Front Position Set

    Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

    By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components. 

    Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

    Powerflex Black Series
    Part #: PFR5-425Bx2
    Price: $107.99 (USD) 
    In Stock
    Quantity:   
    OEM Lemforder Rear Subframe Bushing - E88 E82 E9X

    Exposure to the elements and stress/pressure can lead to failing and splitting subframe bushings. Ensure your subframe is mounted perfectly steady to prevent vibrations, knocks, suspension issues, and potential damage to the body of the vehicle or suspension components. OEM Lemforder is the perfect replacement to make sure that everything is mounted properly.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Lemforder
    Part #: 33316758259
    Price: $24.88 (USD) 
    Ships in 5 days
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Powerflex Performance Polyurethane Subframe Bushings - E8X, E9X

    Tasked with keeping the vehicles rear end firmly mounted while absorbing noise, vibration, and harshness (NVH) factory rubber subframe bushings were engineered to provide a balance of control while keeping the ride quality soft and supple. As a factory bushings age, they become brittle and begin to harden. When this happens the bushing will actually shrink and allow excess play, or movement in the subframe. This is typically felt by a sudden jerk or "thunking" noise under acceleration and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushings with full polyurethane this play is eliminated since the subframe is being held in place by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering and acceleration inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver. 

    Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

    Powerflex
    Part #: PFR5-420Px2
    Price: $207.99 (USD) 
    Direct Ship
    Free Shipping Free Shipping
    Quantity:   
    Powerflex Performance Polyurethane Differential Bushing - E82, E88, E90, E91, E92, E93

    Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

    By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components. 

    Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

    Powerflex
    Part #: PFR5-426
    Price: $50.99 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    OEM Lemforder Front Upper Strut Mount - E90 E92 - up to 03/2010

    Strut mounts can begin to wear and fail over time, causing a knock in the suspension to occur. Replace yours with a high quality OEM Lemförder replacement to ensure a tight, noise-free ride.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Lemforder
    Part #: 31336775097
    Price: $56.96 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Genuine BMW Hex Bolt With Washer 33176760342

    Genuine BMW Hex Bolt With Washer - M14X110-10.9
    This item fits the following BMW Chassis:
    E39 M5,E82 1M Coupe,E53 48IS,E38,E39,E53 X5,E63,E65,E82,E90,E92,E93,F01,F02,F06,F10,F12,F13,F22,F30,i12

    Genuine BMW
    Part #: 33176760342
    Price: $9.69 (USD) 
    $11.27 (14% off MSRP)
    Ships in 6 days
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Meyle HD
    Part #: 31120393540
    Price: $44.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Race Polyurethane Front Tension Arm Bushings - E8X, E9X

    Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

    Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

    This part fits the following BMWs:
    2008 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe
    2006 - 2008 E90 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
    2009 - 2012 E90 323i 323i 328i 328xi 335d 335i 335i xDrive 335xi
    2006 - 2009 E91 325xi 328i 328xi
    2009 - 2011 E91 328i 328xi 
    2007 - 2013 E92 328i 328xi 335i 335xi
    2007 - 2013 E93 328i 335i

    Powerflex Black Series
    Part #: PFF5-401B
    Price: $99.99 (USD) 
    In Stock
    Quantity:   
    Shock and Strut Installation Kit - E9X 325xi 328xi 330xi 335xi

    Replacing your struts and shocks? Don't forget the bushings! The rubber mounts for the shocks will go bad over time, especially if you drive hard or the roads are particularly rough. The shock mounts locate the front struts and rear shocks to the car - providing a quiet and vibration-free buffer between the road and the cabin. Shock mounts and bushings can wear out just like any other rubber part on the car. This leads to more noise and harshness reaching the chassis and may complicate your new suspension install. When installing new shocks, that is the perfect time to also replace the mounts. There is no additional time to install them, no special tools required, and doesn't take any extra time! If you re-use the original mounts you have the risk of them failing before your next shock replacement, doubling your labor costs. 

    This item fits the following BMWs: 
    2006-2012 E9X BMW All xi models - 325xi 328xi 330xi 335xi

    Packaged by Turner
    Part #: E9XXISIKT
    Price: $319.78 (USD) 
    Ships on Jul 24, 2018
    Free Shipping Free Shipping
    Quantity:   
    E82, E9X Dinan Monoball Front Thrust Arm Bushings (Pair)

    For someone looking for superior performance and longevity these sealed monoball bushings are the best upper thrust bearing you can buy for an E82 1-series or E9X 3-series. The advantage of a monoball bearing is that it will not deflect under load. All of the rubber bushings move in all sorts of directions and that changes your alignment, especially when used with big brake kits or when driven hard. The condition worsens as the bushing wears out. The Dinan monoball sits in a CNC machined aluminum housing which has zero deflection. The monoball allows complete freedom of movement but only at the desired angles. What you get is superior steering precision, better handling from more consistent alignment, and almost infinite bushing life. And thanks to the inner liner and sealed rubber boots there's none of the extra noise or reduced service life of fully solid race bushings. 

    We strongly advise using these with new control arms. BMW recommends that the bushings be replaced only once per set of control arms. So if your thrust arm bushings have been replaced already then we do not recommend re-using the arms. The other reason is that the aluminum arms stretch over time which will make the bushings loose inside the arm. Other manufacturers recommend filling the stretched arms with paste but replacing the control arm is the better solution.

    For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere.

    This item fits the following BMWs:
    2008-2013 E82 E88 BMW 128i 135i 1M Coupe
    2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
    2007-2011 E91 BMW 325i 328i - Touring Wagon
    2007-2013 E92 BMW 328i 335i 335is M3 - Coupe
    2007-2013 E93 BMW 328i 335i 335is M3 - Convertible

    Dinan
    Part #: D280-0008
    Price: $529.42 (USD) 
    Direct Ship
    Free Shipping Free Shipping
    Quantity:   
    Race Polyurethane Rear Differential Bushing, Rear Position - E8X, E9X

    Differential bushings are responsible for keeping the differential in solid alignment while dampening drivetrain vibration. While OE rubber bushings are fine when they are new from the factory, aged and worn out rubber bushings create a multitude of issues that can range from annoying to dangerous. As a factory bushing ages, it begins to harden and become brittle. When this happens the bushing will actually shrink and allow for movement at the differential mounting point. At this point, the differential is free to shift under load causing a noticeable clunking noise under acceleration and deceleration and massively increasing the stress on the driveshaft and axles. Manual transmissions suffer the worst from this as it can make shifting difficult since the differential will shift when the clutch is engaged and disengaged.

    By replacing these bushings with full polyurethane, the movement is eliminated since the mounting point is supported by a much stiffer material that will not harden or shrink over time. This means less stress on the driveshaft and axles and greater longevity of supporting components. 

    Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved acceleration response, more direct shifting feel and overall improved drivetrain composure with Powerflex performance polyurethane bushings.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

    This part fits the following BMWs:
    2008 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe
    2006 - 2008 E90 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
    2009 - 2012 E90 323i 323i 328i 328xi 335d 335i 335i xDrive 335xi
    2006 - 2009 E91 325xi 328i 328xi
    2009 - 2011 E91 328i 328xi 
    2007 - 2013 E92 328i 328xi 335i 335xi
    2007 - 2013 E93 328i 335i

    Powerflex Black Series
    Part #: PFR5-426B
    Price: $56.99 (USD) 
    In Stock
    Quantity:   
    OEM Lemforder Trailing Arm Ball Joint - E88 E82 F22 F87 F23 E9X F30 F80 F31 34 F32 F82 F33 F83 F36

    Ball joints begin to pop and rattle after a long period of wear and tear. An OEM Lemforder ball joint is the perfect replacement to ensure complete reliability eliminate any noises from the suspension.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Lemforder
    Part #: 33326792553
    Price: $24.50 (USD) 
    Ships on Jul 31, 2018
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    OEM Lemforder Front Strut Mount - E88 E82 E9X E60 E61 E84

    Strut mounts can begin to wear and fail over time, causing a knock in the suspension to occur. Replace yours with a high quality OEM Lemförder replacement to ensure a tight, noise-free ride.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Lemforder
    Part #: 31306775098
    Price: $34.89 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Powerflex Performance Polyurethane Rear Lower Control Arm Bushings - E82, E88, E90, E91, E92, E93

    Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

    Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

    Powerflex
    Part #: PFR5-414x2
    Price: $150.99 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Rear Subframe Bushings/Mount Set - Turner Solid Aluminum - E82, E9X

    A BMWs sub-frame is the heart of the suspension - as the subframe twists and shifts under load all of the suspension mounting points also move. The rear suspension feels loose and lacks precision. As rubber or hydroelastic bushings wear the bushing deflection gets worse. If you have a highly tuned 335i/xi you're putting even more strain on weak bushings. The solution is a stiffer and more durable material. Even BMW has moved to solid mounts on the F10 M5 and F8X M3/M4. These fully solid E82/E90/E92 aluminum mounts have zero deflection - the subframe does not move at all. The rest of the suspension can work as designed and maintain the proper alignment and motion ratios. The driver will notice the difference as the car is more stable and the handling is more precise.

    Although we designed these for use in our racecars, they can work on the street so long as the driver can tolerate some additional noise, vibration, and harshness. These mounts are CNC machined in the USA and made with high-grade aluminum. The set is for all four subframe mounts.

    These solid rear sub frame mounts fit: 
    2008-2012 E82 BMW 128i 135i 
    2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan 
    2006-2011 E91 BMW 325i 328i - Wagon 
    2007-2012 E92 BMW 328i 335i 335is - Coupe 
    2007-2012 E93 BMW 328i 335i - Convertible 

    Turner Motorsport
    Part #: TDR9080SS3
    Price: $299.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Genuine BMW Front Upper Spring Perch - 31336764093

    OE replacement spring perch. 

    *This spring perch also fits OEM E30 front strut housings to allow a drop of approximately 12mm over stock ride height.*

    GENUINE BMW FRONT AXLE UPPER SPRING PLATE 31336764093

    Genuine BMW
    Part #: 31336764093
    Price: $19.29 (USD) 
    $28.11 (31% off MSRP)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Genuine BMW Front Upper Strut/Shock Mount - E9X 325xi, 328xi, 330xi, 335xi The upper strut mount provides a locating point for the top of the front struts. It contains a rubber-isolated bearing that allows the strut shaft to move independently from the rest of the suspension - a critical component for the suspension to be quiet and effective. The rubber also absorbs vibrations and impact harshness, helping to keep unwanted noise and harshness from reaching the steering wheel.
    Genuine BMW

    Price is per mount. Left and Right are the same.

    This item fits the following BMWs:
    2006-2011 E90 BMW 325xi 328xi 328i xDrive 330xi 335xi 335i xDrive - Sedan
    2006-2012 E91 BMW 325xi 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328xi 328i xDrive 335xi 335i xDrive - Coupe
    Genuine BMW
    Part #: 31336775097
    Price: $71.10 (USD) 
    $116.15 (39% off MSRP)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    OEM Lemforder Rear Lower Shock Mount - E88 E82 E9X E84

    Strut mounts can begin to wear and fail over time, causing a knock in the suspension to occur. Replace yours with a high quality OEM Lemförder replacement to ensure a tight, noise-free ride.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Lemforder
    Part #: 33526768544
    Price: $16.49 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Race Polyurethane Subframe Inserts, Front Position Set - E8X, E9X

    Tasked with keeping the vehicles rear end firmly mounted while absorbing noise, vibration, and harshness (NVH) factory rubber subframe bushings were engineered to provide a balance of control while keeping the ride quality soft and supple. As a factory bushings age, they become brittle and begin to harden. When this happens the bushing will actually shrink and allow excess play, or movement in the subframe. This is typically felt by a sudden jerk or "thunking" noise under acceleration and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushings with full polyurethane this play is eliminated since the subframe is being held in place by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering and acceleration inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver. 

    Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

    This part fits the following BMWs:
    E9X All
    E8X All

    Powerflex Black Series
    Part #: PFR5-419BX2
    Price: $91.99 (USD) 
    Direct Ship
    Quantity:   
    Rear Subframe Bushings/Mounts - Rear Pair - Group N Race Rubber - E82, E9X These are the factory BMW Motorsport high performance subframe bushings for the rear of the rear subframe. These heavy duty rubber bushings are stiffer than the stock M3 bushings to improve handling. These bushings are great for track use - and legal for many racing series - and can also be used on a street driven car as long as ride comfort can be compromised.

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
    2007-2012 E93 BMW 328i 335i - Convertible
    Genuine BMW
    Part #: E9X-GPN-RSUBR
    Price: $400.00 (USD) 
    Ships on Aug 13, 2018
    Free Shipping Free Shipping
    Quantity:   
    Powerflex Performance Polyurethane Front Control Arm Bushings - E82, E88, E90, E91, E92, E93

    Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

    Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

    Powerflex
    Part #: PFF5-402X2
    Price: $203.99 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Powerflex Performance Polyurethane Rear Lower Control Arm Bushings - E8X, E9X

    Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

    Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

    Powerflex
    Part #: PFR5-415x2
    Price: $93.99 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    E82, E9X Turner Race Rear Shock Mounts for Spherical Bearing Race Shocks (RSM)

    Made in the USAIf you're installing racing rear shocks with a spherical bearing end you will need this adapter mount for the top of the rear shock. Spherical or rod-end bearings are common on race shocks but they are somewhat universal and mounts are not usually included. We designed and engineered these mounts for our E9X M3 and E90 328i IMSA/CTSCC racecars. Our cacing upper shock mount is machined out of aircraft grade aluminum with a tough anodize finish and high grade hardware. Due to the wide variety of spherical bearings and rod-ends found on race shocks, the bushing kit is sold seperately (see chart for bushing sizes).

    view larger

    Bearing Spacer Chart
    Optional BushingsBushing Kit Part#B=Bore Dia.W=Ball WidthOptional Bushings
    TSU9007B1515 mm12 mm
    TSU9007B50.500" inch.500" inch>

    E9X Racing Rear Spherical Upper Shock Mount Instructions

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i 1M
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2012 E93 BMW 328i 335i M3 - Convertible

    Turner Motorsport
    Part #: TSU9006RU1
    Price: $104.43 (USD) 
    $299.95 (Sale - Save 65%)
    In Stock
    Free Shipping Free Shipping
    Powerflex Performance Polyurethane Rear Sway Bar Bushing Set - E90, E91, E92, E93

    Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

    Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

     

    Powerflex
    Part #: PFR5-4609-14x2
    Price: $65.99 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Race Polyurethane Rear Upper Control Arm Bushings, Outer Position Set - E8X, E9X

    Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

    Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

    This part fits the following BMWs:
    2008 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe
    2006 - 2008 E90 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
    2009 - 2012 E90 323i 323i 328i 328xi 335d 335i 335i xDrive 335xi
    2006 - 2009 E91 325xi 328i 328xi
    2009 - 2011 E91 328i 328xi 
    2007 - 2013 E92 328i 328xi 335i 335xi
    2007 - 2013 E93 328i 335i

    Powerflex Black Series
    Part #: PFR5-412BX2
    Price: $113.99 (USD) 
    Direct Ship
    Quantity:   
    Powerflex Performance Polyurethane Rear Sway Bar Bushing Set - E9X

    Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This in turn reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

    Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

    Powerflex
    Part #: PFR5-4609-13X2
    Price: $65.99 (USD) 
    Direct Ship
    Free Shipping Free Shipping
    Quantity:   
    OEM Lemforder 3-series Strut/Shock Mount Kit - E9X With Sport/Performance Suspension New mounts should be installed whenever you are replacing the struts and shocks on your E90 and E92 3-series. The mounts keep the cabin isolated from annoying noises and impacts. Just like any other rubber mount, these will go bad over time, which allows more harshness and vibration to the chassis along with clunking noises. Replace them now to avoid doubling the labor charges down the road. When installing new shocks, that is the perfect time to also replace the mounts. There is no additional time to install them, no special tools required, and doesn't take any extra time!

    This mount package is for 2006-2012 E90, E91, E92, and E93 3-series with the factory Sport, M Sport, or BMW Performance suspensions .

    Included in the E9X Sport Mount Kit:
  • front upper strut mounts (also known as a guide support), 31306775098
  • A. rear upper-top shock mounts, 33506771737
  • B. rear upper-middle shock mounts, 33506767010
  • C. rear upper-bottom shock mounts, 33506771738
  • D. rear upper supporting cup, 33526764418 (sits over bumpstop)
  • rear lower shock mount (installs on spring arm), 33526768544
    Buy as a package and save $!!

    This item fits the following BMWs with factory Sport, M Sport, or BMW Performance suspension
    2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
    2006-2011 E91 BMW 328i - Wagon
    2007-2012 E92 BMW 328i 335i 335is - Coupe
    2007-2012 E93 BMW 328i 335i - Convertible
  • Lemforder
    Part #: E9XSPORTMOUNTKIT
    Price: $150.70 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Shocks and spring Installation Kit - E82 E88 E90 E92 E93 Non M

    This kit is contains all new strut and shock mounts and hardware needed when installing a new shocks and struts or aftermarket suspension on your vehicle. 

    Fits the following BMW's

    E82/88 128i 135i

    E90/92/93 325i 328i 330i 335i 335is 

     

    Packaged by Turner
    Part #: 31306775098KT2
    Price: $275.64 (USD) 
    Ships on Jul 24, 2018
    Free Shipping Free Shipping
    Quantity:   
    OEM Lemforder Camber Adjustment Bushing - 33326770829 - F80 M3, F82 M4

    Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    This item fits the following BMW Chassis:
    E82 1M Coupe,E82,E90,E92,E93,F80 M3,F82 M4,F83

    Lemforder
    Part #: 33326770829
    Price: $11.80 (USD) 
    Ships in 5 days
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Race Polyurethane Rear Control Arm Bushing Set - E8X, E9X

    Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

    Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

    This part fits the following BMWs:
    E8X, E9X All

    Powerflex Black Series
    Part #: PFR5-411Bx2
    Price: $111.99 (USD) 
    In Stock
    Quantity:   
    Front Upper Control Arm Bushing Set (FCAB) - Group N Race Rubber - E82, E9X These are the factory BMW Motorsport Group N high performance front upper control arm bushings. These heavy duty rubber bushings are stiffer than the stock bushings to improve steering feel and improve handling. They are great for track use - and Grand Am Cup legal! - yet can also be used on a street driven car - please note these will not be as compliant as the stock rubber bushings. These are for the control arm with the ball joint pointing down, sometimes referred to as the thrust arm or tension strut.

    Price is for the pair of bushings.

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i 1M
    2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
    2006-2011 E91 BMW 328i - Wagon
    2007-2012 E92 BMW 328i 335i 335is M3 - Coupe
    2007-2012 E93 BMW 328i 335i M3 - Convertible
    Genuine BMW Motorsport
    Part #: E9X-GPN-UCAB
    Price: $413.38 (USD) 
    Ships on Aug 13, 2018
    Free Shipping Free Shipping
    Quantity:   
    Genuine BMW Repair Kit For Stabilizer Rubber Bushing - Value Line - 31352405870 Genuine BMW Repair Kit For Stabilizer Ru - 31352405870
    Genuine BMW
    Part #: 31352405870
    Price: $29.82 (USD) 
    $34.00 (12% off MSRP)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Rear Shock Mounts (RSM) - (Pair) - Lower - Race Aluminum - E82, E9X

    If you're installing a rear shock on your E90 or E92 that utilizes a Spherical Bearing or Rod-End, common in racing shocks/dampers, this is one of the rear mounts needed to attach your shock to the camber arm (this is the LOWER mount). Developed for our Grand Am Cup 328i race car, this lower shock mount works on all 2006+ E90/E92 including 325i, 328i, 330i, & 335i. This price is for a pair of rear shock mounts.

    Our Racing Rear Lower Shock Mount is machined out of aircraft grade aluminum. We include both the TSU9007B15 and TSU9007B50 bushing kits with this package. (see chart for included bushing sizes).

     

    Chart

    Bushing Kit Part#B=Bore dia. W=Ball width

    TSU9007B1515 mm12 mm

    TSU9007B50.500" inch .500" inch

    Instructions for E90/E92 Race Rear Lower Shock Mount (TSU9006RU2)

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i 1M
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
    2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
    2007-2012 E93 BMW 328i 335i - Convertible

    Turner Motorsport
    Part #: TSU9006RU2
    Price: $100.15 (USD) 
    $239.95 (Sale - Save 58%)
    In Stock
    Free Shipping Free Shipping
    Race Polyurethane Front sway Bar Bushing Set - E9X Non-M

    Sway bars transmit cornering forces from the outside wheels to the inside wheels, helping to keep the vehicle flat during cornering. This, in turn, reduces body roll and improves the driver's cornering confidence. OEM rubber sway bar bushings are designed with comfort in mind, allowing the sway bar to articulate while permitting additional movement, leading to less-than-ideal bar retention and causes unnecessary body roll.

    Powerflex polyurethane sway bar bushings are firmer than factory rubber bushings, reducing body roll and keeping sway bars in check. Polyurethane bushings won't slop around like OEM bushings, allowing sway bars to function at their fullest potential.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

    Powerflex Black Series
    Part #: PFF5-4602-265Bx2
    Price: $72.99 (USD) 
    In Stock
    Quantity:   
    Powerflex Performance Polyurethane Rear Upper Control Arm Bushings - E8X, E9X

    Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

    Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

    Powerflex
    Part #: PFR5-412X2
    Price: $66.10 (USD) 
    $112.99
    Limited Qty Sale
    In Stock
    Quantity:   
    OEM Lemforder Rear Subframe Bushing - E88 E82 E9X

    Exposure to the elements and stress/pressure can lead to failing and splitting subframe bushings. Ensure your subframe is mounted perfectly steady to prevent vibrations, knocks, suspension issues, and potential damage to the body of the vehicle or suspension components. OEM Lemforder is the perfect replacement to make sure that everything is mounted properly.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Lemforder
    Part #: 33316758260
    Price: $24.75 (USD) 
    Ships in 5 days
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    OEM Lemforder Rear Subframe Bushing - E88 E82 E9X E84 E83 Z4

    Exposure to the elements and stress/pressure can lead to failing and splitting subframe bushings. Ensure your subframe is mounted perfectly steady to prevent vibrations, knocks, suspension issues, and potential damage to the body of the vehicle or suspension components. OEM Lemforder is the perfect replacement to make sure that everything is mounted properly.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Lemforder
    Part #: 33176770866
    Price: $16.91 (USD) 
    Ships in 5 days
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Rear Shock Mounts (RSM) - Lower + Upper - OEM Rubber - E82, E9X (not M) (Pair) A 5-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 1-series and E90/E91/E92/E93 3-series consist of 4 pieces -
    A. rear upper-top shock mounts, 33506771737
    B. rear upper-middle shock mounts, 33506767010
    C. rear upper-bottom shock mounts, 33506771738
    D. rear upper supporting cup, 33526764418 (sits over bumpstop)
    In addition, there is a lower shock mount to locate the shock to the suspension (installs on spring arm), 33526768544.

    That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 5 pieces.

    This item fits the following BMWs:
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
    2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
    2007-2012 E93 BMW 328i 335i - Convertible
    Packaged by Turner
    Part #: E9X-REAR-MOUNTS
    Price: $88.80 (USD) 
    In Stock
    Quantity:   
    OEM Lemforder Trailing Arm Bushing - E82 E88 E9X E84

    Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Lemforder
    Part #: 33326763092
    Price: $15.36 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   

    OEM Lemforder Front Control Arm Bushing - E88 E82 E9X E84 Z4

    Located in the curved control arm or "thrust" arm
    OEM Lemforder Front Control Arm Bushing - E88 E82 E9X E84 Z4

    Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Lemforder
    Part #: 31126763719
    Price: $30.31 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    OEM Lemforder Front Upper Strut/Shock Mount - E46 E82 E90 E60 E63

    The upper strut mount provides a locating point for the top of the front struts. It contains a rubber-isolated bearing that allows the strut shaft to move independently from the rest of the suspension - a critical component for the suspension to be quiet and effective. The rubber also absorbs vibrations and impact harshness, helping to keep unwanted noise and harshness from reaching the steering wheel.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    This item fits the following BMWs:
    2008+ E82 BMW 128i 135i
    1999-2005 E46 BMW 323i, 323Ci, 325i, 325Ci, 325xi, 328i, 328Ci, 330i, 330Ci, 330xi
    2006-5/2006 E90 BMW 325i 330i - not for cars with Sport Package
    6/2008+ E90 BMW 328i 335i 335d - not for cars with Sport Package
    1998-2003 E39 BMW 525i, 528i, 530i
    2004-2010 E60 BMW 525i 530i 528i 535i 545i 550i
    2004+ E63 BMW 645ci 650i
    2004-2006 E83 BMW X3 2.5i X3 3.0i X3 3.0si
    2007-4/2007 E83 BMW X3 3.0i X3 3.0si - only for cars with factory Bilstein shocks
    4/2007-2010 E83 BMW X3 3.0i X3 3.0si

    Lemforder
    Part #: 31336752735
    Price: $29.67 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    034Motorsport Rear Subframe Inserts - E9X

    Failed subframe bushings are a major issue on all E9x vehicles. Turner Motorsport recommends installing a set of 034Motorsport Rear Subframe Inserts to add rigidity and eliminate deflection in your Subframe Bushings.

    To install, lower your subframe and place inserts in their respective locations.

    This part fits the following BMWs:

    2006 - 2012 E90 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
    2006 - 2009 E91 325xi 328i 328xi
    2007 - 2013 E92 328i 328xi 335i 335xi
    2007 - 2013 E93 328i 335i
    *DOES NOT FIT M3

     

    034Motorsport
    Part #: 034-601-0047
    Price: $165.00 (USD) 
    In Stock
    Quantity:   
    Powerflex Front Control Arm To Chassis Bushing - E9X Xdrive

    Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

    Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

    Powerflex
    Part #: PFF55071X2
    Price: $118.99 (USD) 
    In Stock
    Quantity:   
    Rear Differential Mounts - OEM Rubber - E82, E9X

    This package of OEM E82 E90 E92 diff mounts replaces the stock rubber diff bushings. On a tuned 335i you may have noticed more driveline shudder or problems hooking up during hard launches. What happens is the stock rubber bushings are under constant flex as engine torque is transmitted through the differential. Under normal driving with a stock car the bushings are rarely stressed. But factor in significant additional torque from a tuned N54/N55 and the stock rubber will quickly show its weaknesses. You may have even broken a diff bolt or two as the heavy differential shifts around. Even non-turbo E82 and E9X models may benefit from fresh bushings.

    This is a set of stock rubber bushings, made by OEM supplier Lemforder. They are the same as the Genuine BMW E9X diff mount bushings, but without the more expensive branding. If you're turned off by potential side effects of urethane or Delrin then the OEM diff mounts are your best option. The OEM mounts fit and perform just like the originals so there is no second guessing their quality. If you're looking for an upgrade we offer E9X solid Delrin and aluminum diff mounts that work well, even in street applications.

    E9X Diff Mount Set includes:

    • 33176760287 x 2, front differential mount
    • 33176770866 x 1, rear differential mount
    • (new hardware is optional and can be ordered separately below)

      This item fits the following BMWs:
      2008-2012 E82 BMW 128i 135i
      2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
      2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
      2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
      2007-2013 E93 BMW 328i 335i - Convertible
    Packaged by Turner
    Part #: E9X-DIFF-MOUNTS
    Price: $104.32 (USD) 
    Ships in 6 days
    Free Shipping Free Shipping
    Quantity:   
    Front Lower Control Arm Bushings (LCAB) - Motorsport Race - E82, E9X (Pair) Genuine BMW Motorsport Front Lower Control Arm Bushing features a heavy duty rubber bushing that is stiffer than any of the stock bushings to improve handling. These bushings are great for track use - and Grand Am Cup legal! - yet can also be used on a street driven car - please note these will not be as compliant as the stock rubber bushings. Sold as a pair.

    This item fits the following BMWs:
    2008-2012  E82 BMW  128i 135i
    2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan
    2006-2011  E91 BMW  328i - Wagon
    2007-2012  E92 BMW  328i 335i 335is - Coupe
    2007-2012  E93 BMW  328i 335i - Convertible
    Genuine BMW
    Part #: 31128300875KT
    Price: $99.90 (USD) 
    Ships on Aug 13, 2018
    Free Shipping Free Shipping
    Quantity:   
    Rear Trailing Arm Bushing - Inner + Outer - Group N Race Rubber - E82, E9X These BMW Motorsport Group N Bushings replace all of the bushings on the factory trailing arm (impact arm - the one with all of the holes). These inner and outer bushings feature a heavy duty rubber that is stiffer than stock. The stiffer bushing reduces deflection and twist in the arm, leading to more stable handling and faster response in the suspension. These bushings are great for track use and legal for some racing classes yet can also be used on a street driven car where extra ride harshness can be tolerated.

    Sold as a set of 4 - two bushings for each trailing arm.

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
    2007-2013 E93 BMW 328i 335i - Convertible
    Genuine BMW
    Part #: E9X-GPN-TR-ARM
    Price: $279.80 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Genuine BMW Camber Adjustment Bushing - 33326770829 - F80 M3, F82 M4

    Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


    Genuine BMW Rubber Mount, Roll-Over Strut
    This item fits the following BMW Chassis:
    E82 1M Coupe,E82,E90,E92,E93,F80 M3,F82 M4,F83
     

     

    Genuine BMW
    Part #: 33326770829
    Price: $33.87 (USD) 
    $40.11 (16% off MSRP)
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Front Upper Control Arm Bushing Set (FCAB) - Monoball - E82, E89, E90, E92, E93

    BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience.  Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. 

    For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).  We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, and E83 owners similar levels of handling precision and control for the track and street. 

    The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting.  The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

    In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

    We offer these thrust arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms.

    Features:

    Bearing housing

    • Precision CNC machined from 6061-T6 blue anodized aluminum
    • Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands.
    • CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. 

    Bearing

    • OEM BMW sealed and greased ball joint for exceptional durability and service life.

    Performance

    • Nearly instantaneous, crisp steering and braking response.
    • Maintenance free, long lasting performance. 
    • Improved road feel without undesirable NVH.

    Sold as a pair for RWD models only.

    Click here for installation instructions.

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i 1M Coupe
    2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
    2006-2012 E91 BMW 328i - Wagon
    2007-2013 E92 BMW 328i 335i 335is M3 - Coupe
    2007-2013 E93 BMW 328i 335i M3 - Convertible
    2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

    Turner Motorsport
    Part #: TSUE9080QIS
    Price: $299.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Rear Toe Arm Bushing - Inner + Outer - Group N Race Rubber - E82, E9X These BMW Motorsport Group N Bushings replace all of the bushings on the factory toe control arm (also known as the track strut). These inner and outer bushings feature a heavy duty rubber that is stiffer than stock. The stiffer bushing reduces deflection and twist in the arm, leading to more stable handling and faster response in the suspension. These bushings are great for track use and legal for some racing classes yet can also be used on a street driven car where extra ride harshness can be tolerated.

    Sold as a set of 4 - two bushings for each toe arm.

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
    2007-2013 E93 BMW 328i 335i - Convertible
    Genuine BMW Motorsport
    Part #: E9X-GPN-TOE
    Price: $259.00 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Front Upper Control Arm Bushing (FCAB) - OEM Rubber - E82 1M, E9X M3 These are the stock replacement front control arm bushings (FCAB) for the E82 1M and E9X M3 models. These solid rubber bushings replace the inner bushing on the front upper control arm, also known as the thrust arm or tension stut (it's the arm with the outer ball joint pointing down). These are the OEM bushings with a metal sleeve insert for precise but comfortable steering feel and response. A direct replacement for the E90/E92/E93 M3 and E82 1M. Professional installation recommended since these bushings need to be 'compressed' while they are being pressed in.

    This can also be used as an upgrade on non-M E82, E9X, and E89 Z4 models. The solid rubber of the M3 is a better and longer-lasting bushing than the fluid-filled stock E90 bushing. These M3 bushings are a bit stiffer than the original design so the steering and handling will be sharper while maintaining M3-levels of ride comfort.

    Sold per bushing (order 2 for both sides).

    This item is a direct fit for the following BMWs:
    2008-2012 E82 BMW 1M
    2008-2012 E90 BMW M3 Sedan
    2008-2013 E92 BMW M3 Coupe
    2008-2013 E93 BMW M3 Convertible
    This item is an upgrade for the following BMWs:
    2008-2012 E82 BMW 128i 135i
    2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
    2006-2011 E91 BMW 328i - Wagon
    2007-2012 E92 BMW 328i 335i 335is - Coupe
    2007-2012 E93 BMW 328i 335i - Convertible
    2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
    Genuine BMW
    Part #: 31102283579
    Price: $62.94 (USD) 
    $74.54 (16% off MSRP)
    Ships in 6 days
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Rear Subframe Bushings/Mounts - Set - Group N Race Rubber - E82, E9X The E82 and E90/E92 subframes have an inherent weakness in the rear subframe - the mounts are too soft for the power and torque these cars are capable of. The subframe is the heart of a BMW's rear suspension. As torque is transmitted through the differential and axles and as the tires grip the road, the subframe mounts are working to keeping everything in line. That's a tough task to hold when torque is increased with bigger boost (335i) or even mild tweaks (M3). While the M3 subframe mounts are a great upgrade for the non-M chassis these factory BMW Motorsport subframe mounts go one step further.

    These Motorsport/Group N rear subframe bushings are a direct replacement upgrade over the stock mounts. They are rubber to conform to the rules of the Group N racing class - so they are still acceptable for street use as long as extra ride harshness can be tolerated. The rear subframe has to come down from the car for these mounts to be pressed in. So now is the perfect time to do other work as well - check out our other Motorsport Race bushings or M3 upgrades.

    Price is for the set of 4 mounts.

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i 1M Coupe
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2013 E93 BMW 328i 335i M3 - Convertible
    Genuine BMW Motorsport
    Part #: E9X-GPN-SUBFRAME
    Price: $800.00 (USD) 
    Ships on Aug 13, 2018
    Free Shipping Free Shipping
    Quantity:   
    Race Polyurethane Rear Subframe Bushings, Front Position Set - E8X, E9X

    Tasked with keeping the vehicles rear end firmly mounted while absorbing noise, vibration, and harshness (NVH) factory rubber subframe bushings were engineered to provide a balance of control while keeping the ride quality soft and supple. As a factory bushings age, they become brittle and begin to harden. When this happens the bushing will actually shrink and allow excess play, or movement in the subframe. This is typically felt by a sudden jerk or "thunking" noise under acceleration and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushings with full polyurethane this play is eliminated since the subframe is being held in place by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering and acceleration inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver. 

    Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. ​

    This part fits the following BMWs:
    2008 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe
    2006 - 2008 E90 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
    2009 - 2012 E90 323i 323i 328i 328xi 335d 335i 335i xDrive 335xi
    2006 - 2009 E91 325xi 328i 328xi
    2009 - 2011 E91 328i 328xi 
    2007 - 2013 E92 328i 328xi 335i 335xi
    2007 - 2013 E93 328i 335i

     

    Powerflex Black Series
    Part #: PFR5-420Bx2
    Price: $207.99 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity:   

    OEM Lemforder Front Upper Control Arm Bushing Set - E82, E89, E90, E92, E93

    Located in the curved control arm or "thrust" arm
    OEM Lemforder Front Upper Control Arm Bushing Set - E82, E89, E90, E92, E93

    These are the stock replacement front upper control arm bushings. It is also known as the thrust arm bushing or pull rod bushing. This is a set of 2 bushings (31126763719 x 2).

    Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    This item fits the following BMWs:
    2008+ E82 BMW 128i 135i
    2006+ E90 BMW 325i 328i 330i 335d 335i - Sedan 
    2006+ E91 BMW 328i Wagon
    2007+ E92 BMW 328i 335i 335is - Coupe
    2007+ E93 BMW 328i 335i - Convertible
    2009+ Z4 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

    Lemforder
    Part #: 31126763719lKT
    Price: $50.98 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Genuine BMW Spring Pad Upper - 31336767500 - E82,E89,E90,E92,E93

    Dampens noise and vibration where the spring meets the suspension and mounting points.


    Genuine BMW Spring Pad Upper -
    This item fits the following BMW Chassis:
    E82,E89 Z4,E90,E92,E93
     

     

    Genuine BMW
    Part #: 31336767500
    Price: $7.17 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Rear Subframe Bushings/Mounts - Set - Stock M3 Rubber - E82, E9X The subframe is the heart of a BMW's rear suspension. Nearly all of the suspension arms and bushings mount to the chassis through the subframe. So as the suspension deflects forces from the tires, the subframe eventually absorbs them all. Preventing too much deflection and twist in the subframe will keep your handling and alignment consistent. The stock E82 and E90/E92 rear sub-frame mounts are very soft so putting more torque through the car results in a soft or loose (squirrely) feeling in the rear suspension. This set of 4 mounts are from the M3 and are much stiffer.

    These M3 rear subframe bushings are a direct replacement upgrade over the stock mounts. The rear subframe has to come down from the car for these mounts to be pressed in. So now is the perfect time to do other work as well. The time and effort needed to replace them is well worth it, especially on high-horsepower cars (tuned N54, N55, etc).

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
    2007-2012 E93 BMW 328i 335i - Convertible
    Genuine BMW
    Part #: TMS12061
    Price: $271.80 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Rear Subframe Bushings/Mounts - Front Pair - Group N Race Rubber - E82, E9X These are the factory BMW Motorsport high performance subframe bushings for the front of the rear subframe. These heavy duty rubber bushings are stiffer than the stock M3 bushings to improve handling. These bushings are great for track use - and legal for many racing series - and can also be used on a street driven car as long as ride comfort can be compromised.

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
    2007-2012 E93 BMW 328i 335i - Convertible
    Genuine BMW
    Part #: E9X-GPN-RSUBF
    Price: $400.00 (USD) 
    Ships on Aug 13, 2018
    Free Shipping Free Shipping
    Quantity:   
    Rear Subframe Bushings/Mount Set - Turner Solid Delrin/Aluminum - E82, E9X Made in the USA Our solid Delrin/Aluminum rear sub-frame mounts are designed around regulations for Grand-Am, BMW CCA, and other racing series where a solid aluminum mount is not allowed. Thick Delrin casings are used as the non-metallic solid mount. High quality aluminum sleeves, with increased surface area, are then pressed into each of the casings with washers integrated into each one. The washers are employed to add an extra safety factor for securing the sub-frame into position.

    A BMWs sub-frame is the heart of the suspension and we have found with a short amount of track time the stock bushings will start to degrade. When the sub-frame moves, so do all the suspension mounting points. Replace the stock rubber bushings to limit drivetrain and suspension movement and keep your car setup the way it’s supposed to be. These mounts are CNC machined in the USA and made with high-grade materials.

    These Delrin racing solid rear sub frame mounts fit:
    2008-2012 E82 BMW 128i 135i
    2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
    2006-2011 E91 BMW 325i 328i - Wagon
    2007-2012 E92 BMW 328i 335i 335is - Coupe
    2007-2012+ E93 BMW 328i 335i - Convertible
    Turner Motorsport
    Part #: TDR9080SB4
    Price: $499.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Rear Guide Rod Bushing - Inner - Group N Race Rubber - E82, E9X This is a BMW Motorsport Group N Rear Guide Rod Inner Bushing that features a heavy duty rubber that is stiffer than stock. The stiffer bushing reduces deflection and twist in the arm, leading to more stable handling and faster response in the suspension. These bushings are great for track use and legal for some racing classes yet can also be used on a street driven car where extra ride harshness can be tolerated.

    Sold per bushing.

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
    2007-2013 E93 BMW 328i 335i - Convertible
    Genuine BMW Motorsport
    Part #: 33328300878
    Price: $94.00 (USD) 
    $114.95
    Limited Qty Sale
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    OEM Lemforder Control Arm Bushing - E90 E92 Non-M, E84 X1

    Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Lemforder
    Part #: 31126768818
    Price: $30.88 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $99 and up
    Quantity:   
    Race Polyurethane Rear Lower Control Arm Bushings, Inner Position Set - E8X, E9X

    Control arm bushings play a key role in connecting the wheels to the chassis of the vehicle. Tasked with keeping suspension geometry in check while absorbing noise, vibration, and harshness (NVH) factory rubber bushings were engineered to provide a balance of comfort and control. As a factory bushing ages, it becomes brittle and begins to harden. When this happens the bushing will actually shrink and allow excess play in the suspension joint. This is typically felt by a sudden jerk forward after the car comes to a stop and is a leading cause of "sloppy" or "loose" suspension feel. By replacing the bushing with a full polyurethane unit or using a bushing insert, this play is eliminated since the suspension joint is being supported by a much stiffer material that will not harden or shrink over time. Additionally, the inherent stiffness of the urethane material translates body forces much more directly. This means steering inputs from the driver are effectively transferred to the wheels and vital road information is transmitted properly from the wheels to the driver.

    Powerflex street bushings are ideal for street driven vehicles and those that see occasional autocross or track time. Need bushings for a dedicated track car? Powerflex Black Series bushings are the ultimate in track and race bushings. Featuring 95A durometer polyurethane, Black Series bushings are 25% stiffer than street bushings. Engineered to perform, Powerflex performance polyurethane control arm bushings offer a supreme level of control, while still providing enough comfort for the street, with advanced polyurethane that reduces NVH that often accompanies lesser bushings. Expect improved steering feel, turn in, more responsive handling and overall improved chassis composure with Powerflex performance polyurethane control arm bushings.

    Poweflex is a leading manufacturer of aftermarket suspension bushings. Using state of the art design and manufacturing, all replacement bushings are engineered to out-perform and out-last the ones that came in the car. Each line of bushings is meticulously tested and then re-tested to ensure perfect fitment and enduring quality through the life of the vehicle. A full lifetime warranty backs every one of their products and demonstrates the level of confidence and commitment Powerflex has to their customers. 

    This part fits the following BMWs:
    2008 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe
    2006 - 2008 E90 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
    2009 - 2012 E90 323i 323i 328i 328xi 335d 335i 335i xDrive 335xi
    2006 - 2009 E91 325xi 328i 328xi
    2009 - 2011 E91 328i 328xi 
    2007 - 2013 E92 328i 328xi 335i 335xi
    2007 - 2013 E93 328i 335i

    Powerflex Black Series
    Part #: PFR5-415BX2
    Price: $94.99 (USD) 
    In Stock
    Quantity: