Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW E91 Oil Filters & Oil Filter Kits

BMW E91 Oil Filters & Oil Filter Kits What is more important to your engine than its oil supply? You can change your oil as many times as you want but if you don't change the oil filter you might as well dump the old oil back in! Replace your oil filter with every oil change (per BMW's recommendation) and you'll never worry about dirty oil again. We supply filters from the OEM Suppliers to BMW - Mahle, Mann, or OE BMW.
You're currently viewing parts for your (E91) 3-Series Touring 2006-2013. Reset your chassis
For accurate results, specify your model below.
Genuine BMW Oil Drain Plug with Washer- E8X F22/3 F8X E30 E36 E46 E9X F3X E12 E28 E34 E39 E6X F07/10/11 G30/1 E24 F06/12/13 E32 E38 F01/02 F48 G01 F25/26 F15/16 E7X

This genuine BMW replacement oil drain plug with washer is perfect to replace your old beat up or stripped oil plug for easy removal and oil changes.

 

Fits the following BMW chassis:
E8X F22/3 F8X E30 E36 E46 E9X F3X E12 E28 E34 E39 E6X F07/10/11 G30/1 E24 F06/12/13 E32 E38 F01/02 F48 G01 F25/26 F15/16 E7X

Genuine BMW
Part #: 11137535106
Price: $6.18 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
K&P Engineering High Performance Stainless Steel Micronic Oil Filter - N20 N52 N54 N55

Stainless steel filtration is not a new technology but is quickly gaining popularity in the automotive segment. With the ability to filter down as small as a paper filter element with the ability to be washed and reused!

The K&P Engineering filter element is made from medical grade, type 304 stainless steel micronic filter cloth to provide unmatched protection against oil contamination and resultant engine damage. A one inch square of this material flows an incredible 1.9 gallons of oil per minute at only 1 PSI pump pressure. The adhesive used in the filter assembly process is good to 600 degrees Fahrenheit, far above normal engine operating temperatures. A super strength nickel-plated neodymium rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil. The sophisticated bypass is engineered for proper differential pressures and consistent operation, delivering a greater percentage of filtered oil while being very easy to clean. The twist lock design assures positive filter element placement and allows for easy disassembly, inspection, and cleaning. The quad-ring gasket doubles the seal between the filter and the engine. Finally, the filter housing is carved out of solid 6061T6 billet aluminum, which not only looks trick but aids in dissipating heat.

K&P Engineering manufactures stainless steel filters for a vast array of engines around the world. Staying at the forefront of design and testing allows this company to offer a top tier product for your European vehicle.

Features:

  • Consistent filtering across entire filter surface
  • Superior ASTMF316 filtration performance
  • Magnetic Prefiltering
  • Progressive rate bypass combined with high flow characteristics of the filter media avoids unfiltered oil bypassing the filter during cold startup and high rpm
  • Easy inspection of engine contamination
  • Proven in Motorsports, Military and Aerospace applications for years. Technology is FAA approved for use in aircraft. 

At regular oil changes, clean to K&P's specifications for continued used - a true lifetime filter.

This part fits the following BMWs:
2012+ F30 3 Series Sedan 328i 328iX 328i 328iX 335i 335iX 
2006 - 2013 E9X 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
2010 - 2016 F10 5 Series Sedan 528i 528iX 530i 535i 535iX 
2003 - 2006 E60 Sedan 525i 525xi 530i 530xi 
2007 - 2010 E60 528i 528xi 535i 535ix 
2009 - 2016 E89 Z4 Roadster Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i 
2014+ F22 2 Series Coupe 228i 228iX M235i M235iX
2007 - 2013 E88 1 Series Convertible 128i 135i
2008 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe
2012 - 2013 E70 X5 xDrive35d X5 xDrive35i
2007 - 2011 E70 X5 3.0sd X5 3.0si 

K&P Engineering
Part #: S38
Price: $99.00 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Billet Aluminum Oil Filter Housing Cap - N20 N52 N54 N55 S55 BMW uses a lot of plastic in their engine components to save weight and money. Unfortunately, plastic is damaged easily and the factory oil filter cap needs a special tool to remove. This aluminum cap is much more sturdy and features a standard 17mm hex post on the top. 17mm is also the size of your engine oil drain plug, reducing the number of tools that you need to complete an oil change. This cap is designed to use the original o-ring seal so no special parts are required. You only have to remove the original 'filter cage' from the original cap and transfer it to the new aluminum cap. The satin black anodize blends in with the rest of your engine bay making this a smart and subtle upgrade.
ECS
Part #: 003296ECS01
Price: $91.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Genuine BMW Oil Travel Case for 1 liter Bottle This Genuine BMW oil travel case is perfect for holding a 1 liter /1 quart oil bottle for topping up between oil changes. The case has 3 velcro strips on the back to secure the case inside of the trunk. Case includes 2 hand wipes, 2 laminated cardboard funnels, 2 plastic gloves, and 2 cleaning cloths.
Genuine BMW
Part #: 83292158848
Price: $5.79 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
OEM Mahle/Mann Oil Filter - Most 2006+ 6 cylinder, N52/N54/N55/S55 Replacement oil filter kit for most 2006 and newer 6 cylinder BMWs (see list below). This filter is for the N52/N54/N55 engine, the engine used in 2006+ BMWs. It's also used in the 2015+ F80 M3/M4 but BMW also recommends replacing the oil drain plug at the same time (sold separately).

Alternate BMW part# 11 42 7 541 827 (11427541827).

N55 engine note - this filter works with the aluminum oil filter housing only (not plastic).

This filter fits the following BMWs:
2008+ E82 BMW 128i 135i 1M Coupe
2014+ F22 BMW M235i
2006+ E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335i 335xi 335i xDrive - Sedan
2006+ E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007+ E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007+ E93 BMW 328i 335i - Convertible
2012+ F30 BMW 320i xDrive 328i xDrive 335i 335i xDrive - Sedan
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon
2013+ F32 BMW 428i xDrive 435i 435i xDrive - Coupe
2014+ F34 BMW 335i xDrive GT - Gran Tourismo
2015+ F80 BMW M3 - Sedan
2015+ F82 BMW M4 - Coupe
2015+ F83 BMW M4 - Convertible
2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive
2010+ F07 BMw 535i GT, 535i xDrive GT
2011+ F10 BMw 528i 535i 535i xDrive
2012+ F13 BMW 640i
2009+ F01 BMW 740i 740li
2006-2010 E83 BMW X3 3.0i X3 3.0si
2011+ F25 BMW X3 xDrive28i X3 xDrive35i
2007-2013 E70 BMW X5 3.0si X5 xDrive30i X5 xDrive35i
2007-2014 E71 BMW X6 xDrive35i
2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Mann
Part #: 11427566327
Price: $9.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Oil Filter Cap Tool - N20/N51/N52/N54/N55 Engines This tool allows easy removal of the oil filter cap on 2006 and newer BMW 6 cylinder engines. BMW designed the filter cap to be removed with a specific tool making this invaluable for DIY oil changes or shops with a lot of BMW business. It takes a 21mm hex wrench or socket on top.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
2012+ F30 BMW 328i 335i - Sedan
2015+ F80 BMW M3
2015+ F82 BMW M4
2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive
2010+ F07 BMw 535i GT, 535i xDrive GT
2011+ F10 BMW 528i 535i 535i xDrive
2012+ F13 BMW 640i
2006-2010 E83 BMW X3 3.0si
2011+ F25 BMW X3 xDrive28i X3 xDrive35i
2007-2013 E70 BMW X5 3.0si X5 xDrive30i X5 xDrive35i
2008+ E71 BMW X6 xDrive35i
2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Assenmacher Specialty Tools
Part #: 83300493936
Price: $24.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
OEM Bosch Oil Filter Kit -- N52 N54 N55 N20

The oil filter is one of the most simple and yet crucial components of your vehicle, preventing contaminants from flowing back into the engine causing excessive wear and damage. Why buy a cheap alternative when you can have peace of mind with this high quality Bosch oil filter?

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Bosch
Part #: 11427566327
Price: $9.99 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity: