BMW Front Spoilers, Bumper Covers, & Air Dams for BMW E92 M3 S65 4.0L

Clear BMW chassis
Improve the look and the aerodynamics of your BMW with one of our replacement front spoilers or bumpers. Upgrading your BMW's front end with a lip spoiler, front spoiler lips, or a full bumper cover can completely transform the look of your BMW. We carry a variety of OEM BMW front spoilers and aftermarket front spoilers including the M-Tech, ZHP, M3 CSL and M5 style bumpers to suit your needs.

Looking for a rear wing or rear spoiler?
Check out our Rear Spoilers & Wings page.

Turner Motorsport Aluminum Skid Plate - E9x M3
Turner Motorsport Aluminum Skid Plate - E9x M3
The E9x M3 belly pan is a constant point of impact for pa...
Turner Motorsport - Corporate Logo
T#:395281
Part#: 021807TMS03
In Stock
$599.95
Free Shipping

The E9x M3 belly pan is a constant point of impact for parking curbs, inclines, and road debris. Fortunately, there is usually little damage other than the brittle belly pan plastic and side covers which is still not a cheap expense. The Turner Motorsport skid plate is the ultimate upgrade for your belly pan replacement woes, simply being the final replacement for nearly the same cost as the plastic OE replacement.

Turner made a decision to move forward with a black powder coat finish so the skid plate blends in close to the OE look and stays looking good under normal wear. Even though things look similar there are a lot of features taken into consideration when this was designed. The plates mount slightly higher offering even more ground clearance, so there is less chance of impact even though the this skid plate will provide all the strength you need to feel safe. Manufactured from 3/16" 5052 Aluminum at the center plate and 1/8" thick aluminum side plates fastened to the M3 with 1018 steel brackets that perfectly integrate with the factory liners and mounting points. When installing this skid plate there is zero modification required to mount this to your car making this upgrade completely reversible if desired.

All components are protected using wrinkle black powder coat finish to maintain a sleek appearance and protect against corrosion. Includes new stainless steel hardware.

Kit contents:

  • 3/16aEUR thick aluminum main plate and 1/8aEUR thick aluminum side plates
  • 1018 powder coated steel tube support braces for maximum skid plate strength
  • Retains factory air duct for oil cooler
  • Maintains wheel liner mounting positions
  • Contains all necessary stainless mounting hardware and components (OE rubber trim from the vent will need transferred)
  • No modification necessary; easy to convert back to stock
  • Made in America

*Click here for installation instructions

Delrin bumper protection Skid Plates - 11" - E9x M3
Delrin bumper protection Skid Plates - 11" - E9x M3
In an effort to design products that are more appealing t...
Turner Motorsport - Corporate Logo
T#:395656
Part#: 013770TMS01KT
In Stock
Sale - Save 63% $159.95
$59.06
Free Shipping
Sale - Save 63% $159.95
$59.06
Free Shipping

In an effort to design products that are more appealing to the daily driver we engineered these Delrin protection plates based on our own experience with bumper & splitter damage on our own M3's. The aggressive design of the E9x M3 bumper makes it virtually impossible to not have contact at some point of the bumper, from parking curbs to slight inclines making your bumper or carbon splitters look ugly.

We decided to use Delrin with our design due to its durable features, the hardness of Delrin will reduce the amount of visible scratches on the surface and giving extra support under high speed driving conditions. Our protection plates are offered to cover both carbon splitters and the bare bumper with an exact fitment and slightly aggressive option for both situations.

*For use with stock bumpers without the carbon fiber splitter upgrade.

This item fits the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible

Delrin Carbon Splitter Skid Plates - 18.5"
Delrin Carbon Splitter Skid Plates - 18.5"
In an effort to design products that are more appealing t...
Turner Motorsport - Corporate Logo
T#:395751
Part#: 013770TMS04KT
In Stock
Sale - Save 63% $159.95
$59.06
Free Shipping
Sale - Save 63% $159.95
$59.06
Free Shipping

In an effort to design products that are more appealing to the daily driver we engineered these Delrin protection plates based on our own experience with bumper & splitter damage on our own M3's. The aggressive design of the E9x M3 bumper makes it virtually impossible to not have contact at some point of the bumper, from parking curbs to slight inclines making your bumper or carbon splitters look ugly.

We decided to use Delrin with our design due to its durable features, the hardness of Delrin will reduce the amount of visible scratches on the surface and giving extra support under high speed driving conditions. Our protection plates are offered to cover both carbon splitters and the bare bumper with an exact fitment and slightly aggressive option for both situations.

*For use with the carbon fiber splitter upgrade.

This item fits the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible


Delrin bumper protection Skid Plates - 12.5"
Delrin bumper protection Skid Plates - 12.5"
In an effort to design products that are more appealing t...
Turner Motorsport - Corporate Logo
T#:395767
Part#: 013770TMS02KT
In Stock
$159.95
Free Shipping

In an effort to design products that are more appealing to the daily driver we engineered these Delrin protection plates based on our own experience with bumper & splitter damage on our own M3's. The aggressive design of the E9x M3 bumper makes it virtually impossible to not have contact at some point of the bumper, from parking curbs to slight inclines making your bumper or carbon splitters look ugly.

We decided to use Delrin with our design due to its durable features, the hardness of Delrin will reduce the amount of visible scratches on the surface and giving extra support under high speed driving conditions. Our protection plates are offered to cover both carbon splitters and the bare bumper with an exact fitment and slightly aggressive option for both situations.

*For use with stock bumpers without the carbon fiber splitter upgrade.

This item fits the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible


E9X M3 Competition Package Carbon Fiber Front Spoiler Lips (Pair)
Turner Motorsport - Corporate Logo
T#:338421
Part#: 51112160271-2
In Stock
Starting at $704.88
Free Shipping
Starting at $704.88
Free Shipping
As used on the Lime Rock M3 These carbon fiber front lips are from the M3 Competition Package and are a direct fit to any standard E90 or E92 M3 front bumper. They add a little flair and definition to the front end. The stock front bumper can appear too high off the ground and these carbon lips make the car appear lower. These are factory BMW trim pieces so the car was designed to have them (not a tacked on afterthought). The ZCP and other special models represent the top of the M3 line which makes these a great addition to any 'standard' M3, including E90 sedan and E93 convertible models. They are also functional - channeling air under the car and into the undertrays for better cooling and aerodynamic efficiency.

This price is for the set of left and right ZCP carbon splitters. The factory BMW part numbers are 51112160271 (left) and 51112160272 (right). They install on the front of the stock M3 bumper as an add-on piece. For the strongest installation we recommend you use the factory BMW adhesive kit (Betalink) which can be added to your order in the options below.

For the complete M3 carbon lip installation instructions, click here.

These Competition Package front lips fit the following BMWs:
2008-2011 E90 M3 sedan
2008-2013 E92 M3 coupe
2008-2013 E93 M3 convertible
Delrin Carbon Splitter Skid Plates - 17"
Delrin Carbon Splitter Skid Plates - 17"
In an effort to design products that are more appealing t...
Turner Motorsport - Corporate Logo
T#:395761
Part#: 013770TMS03KT
In Stock
$159.95
Free Shipping

In an effort to design products that are more appealing to the daily driver we engineered these Delrin protection plates based on our own experience with bumper & splitter damage on our own M3's. The aggressive design of the E9x M3 bumper makes it virtually impossible to not have contact at some point of the bumper, from parking curbs to slight inclines making your bumper or carbon splitters look ugly.

We decided to use Delrin with our design due to its durable features, the hardness of Delrin will reduce the amount of visible scratches on the surface and giving extra support under high speed driving conditions. Our protection plates are offered to cover both carbon splitters and the bare bumper with an exact fitment and slightly aggressive option for both situations.

*For use with the carbon fiber splitter upgrade.

This item fits the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible


M3 Style Bumper Conversion - Front
M3 Style Bumper Conversion - Front
Are you looking for that M3 look without the M3 expense? ... For vehicles without PDC and a production date up to 03/2010
Turner Motorsport - Corporate Logo
T#:552592
Part#: E92M3FTBUMPTMS
Direct Ship
$469.95
$469.95

Are you looking for that M3 look without the M3 expense? Turner Motosport has the solution for you. This M3 replica front bumper is manufactured to genuine specifications. Made from flexible ABS plastic, the fit and finish will have your car looking like a factory M3.Over the years, Turner Motorsport has been striving to create quality aftermarket parts for affordable prices. These parts have been manufactured to the highest standards and were tested in our factory, to ensure their performance and fitment. DonaEURtmt spend more money than you have to on your performance parts, get quality aftermarket replacement parts for a price that you can afford.Includes the following:

  • M3 Bumper Cover
  • Lower Grille
  • Fog Lights and Trim

**Note: Fog lights will require sourcing and splicing in of 9006 connectors. Slight trimming or removal of the brake and oil cooler ducts will be necessary to install the E9X M3 style front bumper.**

E9X M3 Replica Front Spoiler / Bumper Cover - E9X M3
E9X M3 Replica Front Spoiler / Bumper Cover - E9X M3
Damaged your M3's front spoiler? This high qualit...
Turner Motorsport - Corporate Logo
T#:340292
Part#: E9XM3FTREP
Direct Ship
Starting at $467.95
Starting at $467.95
Damaged your M3's front spoiler? This high quality replica is a direct replacement for the factort E9X M3 front spoilerfor a fraction of what the original M3 spoiler would cost. It also includes the mesh center grill. Available for cars with and without PDC (park distance control). Comes ready to paint and install. Professional paint and installation is always recommended.

Because of size and dimensions of this front bumper, it can not be shipped via conventional carriers such as UPS or FedEx, and must be shipped via Truck Frieght shipping. Please call or email, and we can get you a a quote for freight.

This M3-style front bumper / front spoiler fits the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible
Not for cars with Headlight Washers

E9X M3 GT4-style Carbon Fiber Front Splitter
E9X M3 GT4-style Carbon Fiber Front Splitter
A homage to the original BMW front lip seen on the E92 M3...
Turner Motorsport - Corporate Logo
T#:340242
Part#: E92CFFTLIP
Ships on Mar 5, 2019
Starting at $828.95
Starting at $828.95
A homage to the original BMW front lip seen on the E92 M3 GT4 and our Frozen Gray M3 Project Car, this front splitter is both beautiful and fully functional as it adds substantial downforce to the front end of the E90 & E92 chassis M3. It is designed and engineered to mate perfectly with the stock M3 front bumper and it is a direct bolt-on item for ANY 2008-2012 BMW M3.

Made of fiberglass with a carbon fiber skin, front splitter includes fully functional brake duct openings for maximum cooling. Aerodynamically the splitter helps to direct air around the sides which reduces lift and increases downforce.

This item fits the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible

BMW M Performance Carbon Fiber Front Left Splitter - E9X M3
BMW M Performance Carbon Fiber Front Left Splitter - E9X M3 ...
Replace your damaged or missing splitter or add a brand n...
Genuine BMW M Performance - Corporate Logo
T#:16039
Part#: 51112160271
In Stock
11% off MSRP $412.00
$366.78
Free Shipping
11% off MSRP $412.00
$366.78
Free Shipping

Replace your damaged or missing splitter or add a brand new Carbon Fiber Splitter to your new M3 bumper.

We also offer the complete E9X M3 Carbon Fiber Front Spoiler Lips kit with both the left and right lips.

This item fits the following BMWs:
BMW M Series - M3 Convertible, M3 Coupe, M3 Sedan

BMW M Performance Carbon Fiber Front Right Splitter - E9X M3
BMW M Performance Carbon Fiber Front Right Splitter - E9X M3 ...
Replace your damaged or missing splitter or add a brand n...
Genuine BMW M Performance - Corporate Logo
T#:23291
Part#: 51112160272
In Stock
10% off MSRP $366.78
$330.51
Limited Qty Sale
Free Shipping
10% off MSRP $366.78
$330.51
Limited Qty Sale
Free Shipping

Replace your damaged or missing splitter or add a brand new Carbon Fiber Splitter to your new M3 bumper.

We also offer the complete E9X M3 Carbon Fiber Front Spoiler Lips kit with both the left and right lips.

This item fits the following BMWs:
BMW M Series - M3 Convertible, M3 Coupe, M3 Sedan

E9X M3 Genuine BMW Motorsport GT4 Front Splitter
E9X M3 Genuine BMW Motorsport GT4 Front Splitter
Ultra-rare BMW Motorsport Racing part! This front splitte...
Genuine BMW - Corporate Logo
T#:4422
Part#: GT4-SPLITTER
Ships on Mar 5, 2019
$4,269.95
$4,269.95
Ultra-rare BMW Motorsport Racing part! This front splitter was optional equipment on the M3 GT4, a production-based race car built and sold by BMW Motorsport for the European GT4 race series. This front splitter is the REAL DEAL -- a true racing part that designed to add substantial downforce to the front end of the E9X chassis M3. As the M3 GT4 still used the same stock front bumper cover as your typical M3 street car, this splitter can be added to ANY 2008 or newer BMW M3.

Made of 100% carbon fiber, this front splitter includes fully functional brake duct openings for maximum cooling. As this is a true race part, made in very small numbers, the cost from BMW Motorsport reflects this -- but if you need a fully developed front splitter that was engineered by BMW Motorsport (and not just some "guess and test" styling piece) this is the splitter you want.

This item fits the following BMWs:
2008+ E90 M3 sedan
2008+ E92 M3 coupe
2008+ E93 M3 convertible


E9X M3 Carbon Fiber Front Spoiler Lips (Pair) - All E90/E92 M3
E9X M3 Carbon Fiber Front Spoiler Lips (Pair) - All E90/E92 M3 ...
These replica ZCP front lip spoilers provide the look and...
ECS - Corporate Logo
T#:180905
Part#: E9XM3PSPLITKIT
In Stock
$333.95
Free Shipping
These replica ZCP front lip spoilers provide the look and quality of the original BMW parts but at a fraction of the cost. They fit perfectly and are made of beautiful high quality carbon fiber. These look nearly identical to the OE splitters that come on all the 2011 M3 Competition Package models, and they can easily be added to the standard M3 front bumper for the same aggressive (yet factory) look. Set includes one left spoiler and one right lip spoiler. These install with the existing hardware on the bumper but 3M double-sided tape and BMW Betalink adhesive is also recommended. #E9XM3PSPLIT

These Competition Package front lips fit the following BMWs:
2008+ E90 M3 sedan
2008+ E92 M3 coupe
2008+ E93 M3 convertible
Karbonius GT4 Style carbon fiber front lip - E9X M3
Karbonius GT4 Style carbon fiber front lip - E9X M3
The GT4 Motorsport splitter combines form and functionali...
Karbonius Composites - Corporate Logo
T#:567962
Part#: E92S006
In Stock
New Item
$1,234.40
$1,234.40
The GT4 Motorsport splitter combines form and functionality into a track-ready package. Brake ducts allow increased airflow to the brakes for improved cooling, resulting in shorter braking distances. This wind tunnel-tested platform will provide additional downforce to improve stability at speed and during aggressive cornering. If you are looking for a race-proven functional splitter that will hold up to the scrutiny of even the most abusive track conditions, your solution has arrived.
Aeroflow Dynamics V1 Canards - E90/92/93 M3
Aeroflow Dynamics V1 Canards - E90/92/93 M3
Redirect airflow away from the wheel wells and even creat...
Aeroflow Dynamics - Corporate Logo
T#:567118
Part#: C-E90-E93-V1
Direct Ship
New Item
$200.00
$200.00

Redirect airflow away from the wheel wells and even create a bit of additional downforce with these premium aluminum canards from Aeroflow Dynamics!

Features and Specifications:

  • Made from High Quality Aluminium
  • Made in the USA
  • Comes fully CNC'd and professionally powder coated gloss black.
  • Fitment Guaranteed
  • Hardware are included
  • Comes in pairs ( left & right)
  • Professional install highly recommended

Motorsport Frame Mounted Front Lip - E9x M3
Motorsport Frame Mounted Front Lip - E9x M3
Mounts directly to frame rails to drastically reduce fron...
RKP - Corporate Logo
T#:399032
Part#: RKP-E9X-MSLIP-2
Direct Ship
$3,600.00
$3,600.00

Mounts directly to frame rails to drastically reduce front end lift. Not only is this lip ultra-functional, but it features the same OEM fit and finish that can be expected of any RKP composite product.

Handcrafted in Germany.

RKP offers the highest quality carbon fiber parts for your BMW that add functionality and style to your BMW. RKP is closely involved with BMW's M Division, boasting a line of track-proven hand laid carbon fiber components of the quality your BMW deserves.