click to Chat Live
Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart
Home
Categories
Specials Gifts & Clothing
  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages
Brakes
  1. Brake Overhaul Packages
  2. Brake Pads
  3. Brake Pad Sensors
  4. Brake Rotors
  5. StopTech Big Brake Kits
  6. Brembo Big Brake Kits
  7. Stainless Steel Brake Lines
  8. Brake Fluid
  9. Brake Calipers
  10. Caliper Rebuild Kits
  11. Parking Brake Parts
  12. ABS/DSC System Parts
  13. Brake Cooling Ducts & Backing Plates
  14. Brake Pads - Brembo GT BBK Calipers
  15. Brake Pads - StopTech BBK Calipers
Car Care & Accessories
  1. Car Covers
  2. Wheel & Tire Cleaning
  3. Wax, Polish and Cleaning Supplies
  4. Detailing Gear
  5. Leather & Plastic Care
  6. Car Cleaning Supplies
  7. Chassis Paint, Coatings, Sealants, and Rust Conversion
Drivetrain
  1. Differential and Gearing Upgrades
  2. Differential Mounts and Upgrades
  3. OEM Clutch Kits & Clutch Parts
  4. Performance Clutch Kits & Parts
  5. Stock OEM Dual Mass Flywheels
  6. Clutch Parts
  7. UUC Short Shift Kits
  8. Axle Shafts
  9. Driveshafts
  10. Performance Short Shift Kits
  11. UUC DSSR - Double Sheer Selector Rod
  12. Drivershaft Center Support Bearings
  13. Flex Discs & Guibos
  14. Transmission Mounts
  15. Transmission Parts
Engine Chips
  1. Performance Flash Software, 2005+ Models
  2. Sprint Booster Drive-by-Wire Module
Engine Parts
  1. Engine Performance Packages
  2. Water Pumps
  3. Radiators & Cooling System Overhaul Kits
  4. Oil Pan Baffles
  5. Radiator Hoses, Cooling Hoses, & Hose Sets
  6. Underdrive Power Pulleys
  7. Schrick Performance Camshafts
  8. External Engine Parts
  9. Drive Belts & V-Belts
  10. Gaskets, Gasket Sets, Seals, & O-Rings
  11. Crankcase Vent, PCV, and Oil Separator Systems
  12. Motor Mounts
  13. Electrical Sensors, Switches, & Relays
  14. Alternator & Alternator Parts
  15. Starter Motors & Starter Parts
  16. Fuel System Parts
  17. Internal Engine Parts
  18. Cylinder Head Parts & Head Bolts
  19. VANOS Units & Parts
  20. Rod Bearing Kits
  21. Oil Coolers & Oil Cooler Parts
Exhaust
  1. Supersprint Performance Exhaust Systems
  2. Performance Headers & Downpipes
  3. Turner Motorsport Performance Exhaust
  4. Akrapovic Performance Exhaust Systems
  5. Borla Performance Exhaust Systems
  6. Corsa Performance Exhaust Systems
  7. Dinan Free Flow Exhaust Systems
  8. Performance Exhaust Systems
  9. Exhaust System Upgrades
  10. Exhaust Muffler Tips
  11. Oxygen Sensor - O2 Sensors
  12. Exhaust Gaskets Hangers and Parts
Exterior / Body
  1. Black Grills
  2. Chrome Grills & Trim
  3. Emblems & Decals for Hood, Trunk, and Wheels
  4. Painted Reflectors
  5. Front Spoilers, Bumper Covers, & Air Dams
  6. Rear Spoilers, Rear Wings, & Aprons
  7. Body Trim Parts & Accessories
  8. Carbon Fiber Trunk Lids
  9. Hood & Trunk Shocks, Struts
  10. License Plate Brackets & License Plate Frames
  11. Mirror Kits & Mirror Parts
  12. Window Regulators & Motors
  13. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  14. Hood Pins and AeroCatch Latches
  15. Racing Tow Hooks and Tow Straps
  16. Aero & Body Kits
Intake
  1. aFe Cold-Air Intake Kits
  2. Turbos & Active Autowerke Superchargers
  3. Dinan Cold Air Intake Kits
  4. Gruppe M Cold-Air Intake Kits
  5. aFe Performance Air Filters
  6. K&N Performance Air Filters
  7. Intake Cleaning & Recharging Kits
  8. Intake Manifold Components (DISA, Vacuum, CCV, Etc)
  9. Throttle Body Parts
  10. Other Intake Kits
Interior
  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. Factory Steering Wheels
  7. Racing Steering Wheels
  8. Shift Knobs, Shift Boots, & Shift Handles
  9. Seats & Seat Accessories
  10. Seat Belts and Racing Harnesses
  11. Cup Holders and Storage
  12. Carbon Fiber Interior Parts
  13. Door Sill Strips
  14. Heating & Air Conditioning
  15. Interior Switches and Switchgear
  16. Sunshades & Windscreens
  17. Interior Trim & Accessories
Lighting
  1. Euro Clear Turn Signals, Parking Lights, & Tail Lights
  2. Turn Signals / Parking Lights
  3. Angel Eye Headlight Conversions
  4. Bulbs for Headlights, Turn Signals and Tail Lights
  5. Headlights, Headlight Lenses, & Headlight Parts
  6. Fog Lights, Fog Light Lenses, & Fog Light Parts
  7. Tail Lights
  8. Stealth Bulbs
Maintenance
  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Cabin Air Filters, Heppa Filters, & Microfilters
  5. Transmission Filter Kits & Transmission Service Parts
  6. Ignition Coils
  7. Spark Plugs
  8. Service Reset Tools & Fault Code Readers
  9. Anti-Freeze and Coolant
  10. Engine Oils - Genuine BMW and OEM
  11. Power Steering and Hydraulic Fluids
  12. Transmission and Gear Oil - Genuine BMW and OEM
  13. MOTUL Engine Oil and Gear Lubricants
  14. Red Line Oil & Fluids
  15. Liqui-Moly Oil and Additives
Suspension
  1. Shocks & Struts
  2. H&R Performance Springs
  3. Spring & Shock Packages
  4. Dinan Coilover Spring Kits
  5. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  6. H&R Coil Over Suspensions
  7. KW Coil Over Suspensions
  8. ST Suspension Coilover Kits
  9. Turner Motorsport Racing Suspension Kits
  10. Chassis Reinforcement Kits & Parts
  11. Sway Bar Kits
  12. Sway Bar Links & Sway Bar Parts
  13. Camber / Caster Kits
  14. Strut Braces & Stress Bars
  15. Control Arm Replacements & Upgrades
  16. Suspension Bushings & Mounts
  17. Wheel Bearings & Hub Assemblies
  18. Steering Racks & Power Steering Pumps
  19. Tie Rods & Steering Parts
  20. Coil Over Spring Hardware
  21. CATuned Coilover Kits
  22. Sachs Performance Coil Over Suspension
Wheels
  1. Apex Flow Formed Alloy Wheels
  2. Forgeline Custom Forged Alloy Wheels
  3. HRE FlowForm Performance Alloy Wheels
  4. Vorsteiner Wheels
  5. Rohana Wheels
  6. D Force Flow Formed Alloy Wheels
  7. Alpina Alloy Wheels
  8. Original BMW Wheels and Wheel Upgrades
  9. Turner Motorsport Wheel Spacers
  10. ECS Tuning Wheel Spacers
  11. H&R Wheel Spacers
  12. Wheel Bolts, Wheel Studs and Nuts
  13. Wheel Emblems, Caps, and Accessories
  14. High Performance Wheels
Tools
  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Clutch Alignment Tools
  5. Coil Over Wrenches
  6. Cooling System Tools
  7. Cylinder Head and VANOS Tools
  8. Exhaust Tools
  9. Fan and Fan Clutch Tools
  10. Fault Code Readers and OBD Scan Tools
  11. Fuel System Tools
  12. Genuine BMW Tool Kits
  13. Oil Service Tools
  14. Sockets
  15. Spark Plug Sockets
  16. Transmission and Differential Tools
  17. Wheel Pin Tools
  18. Workshop Chemicals
Clearance
Choose BMW
BMW 1 Series
  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+
BMW 2 Series
  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+
  3. (F87) M2 2016+
BMW 3 Series
  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+
  18. (F34) 3-Series Gran Turismo 2014+
BMW 4 Series
  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2015+
  3. (F34) 4-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+
  6. (F36) 4-Series Gran Coupe 2015+
BMW 5 Series
  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+
  10. (G30) 5-Series 2017+
BMW 6 Series
  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Coupe 2011+
  6. (F13) 6-Series Convertible 2011+
BMW 7 Series
  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+
BMW 8 Series BMW Classics (E9, Bavaria, Isetta, etc)
  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978
BMW X Series (SAV)
  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+
  12. (F48) X1 2016+
  13. (F48) X1 (2016+)
BMW Z Series
  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003
BMW 1600-2002 / tii BMW i Series
  1. (I01) BMW i3 2014+
  2. (I12) BMW i8 2014+
MINI Cooper and Cooper S
Racing
Racing Home Racing News Racing Schedule Racing Photo Gallery
Gallery
Photo Gallery Wallpaper Project Cars
  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone
Video Gallery
Projects
Turner BMW i8 Turner BMW F80 M3 Turner BMW F82 M4 Turner BMW X5 M Turner BMW F22 2 Series Turner BMW F13 M6 Turner BMW F10 M5 Turner BMW F30 335i Turner BMW E9X M3 Turner BMW E92 335i Turner BMW E82 1 Series Turner BMW ActiveE (100% Electric) Turner BMW E46 M3 Turner BMW E46 330i ZHP Turner BMW E36 M3 Turner BMW E30 M3 Turner MINI Cooper S McLaren F1 Turner BMW E92 M3 Lime Rock Turner BMW F80 M3 Silverstone
About Us
About Turner Motorsport Customer Feedback The Turner Team
  1. Open Positions
Returns Policy Shipping Info Contact Us Privacy Policy Security Policy FAQs

BMW E92 M3 Suspension Bushings & Mounts

BMW E92 M3 Suspension Bushings & Mounts Suspension mounts are designed to absorb the energy of the shocks and springs and isolate road harshness from the chassis. But over time the original rubber mounts will crumble and fail. We have stock mounts and bushings as well as a wide selection of upgraded and heavier-duty for performance street cars. We also offer a full selection of race only bushings and mounts. Simply choose your car below. Included here you will find rear shock tower mounts, front strut mounts, subframe mounts, lower control arm bushings, rear trailing arm bushings, and more.
You're currently viewing parts for your (E92) M3 Coupe 2008-2013. Reset your chassis
For accurate results, specify your model below.
Genuine BMW Rear Upper Shock Mount, Bottom - 33506771738 Replace your shock mount each time you replace your shocks to reduce noise and vibrations from the road and suspension system. Failing shock mounts may also end up leading to knocking and rattling sounds coming from the rear suspension.
Part #: 33506771738
Price: $22.95 (USD) 
Quantity:   
OEM Lemforder Guide Support/Strut Mount - Upper Part - E88 E82 E9X

Strut mounts can begin to wear and fail over time, causing a knock in the suspension to occur. Replace yours with a high quality OEM Lemförder replacement to ensure a tight, noise-free ride.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Part #: 33506771737
Price: $8.95 (USD) 
Quantity:   
Genuine BMW Front Upper Spring Perch - 31336764093

OE replacement spring perch. 

*This spring perch also fits OEM E30 front strut housings to allow a drop of approximately 12mm over stock ride height.*

GENUINE BMW FRONT AXLE UPPER SPRING PLATE 31336764093

Part #: 31336764093
Price: $12.82 (USD) 
Quantity:   
Genuine BMW Rubber Mounting Rear 33312283383 Genuine BMW REAR AXLE RUBBER MOUNTING REAR
Part #: 33312283383
Price: $68.95 (USD) 
Quantity:   
OEM Lemforder Guide Support/Strut Mount - Lower Part - E88 E82 E9X

Strut mounts can begin to wear and fail over time, causing a knock in the suspension to occur. Replace yours with a high quality OEM Lemförder replacement to ensure a tight, noise-free ride.

OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

Part #: 33506771738
Price: $6.95 (USD) 
Quantity:   
E82, E9X Turner Race Rear Shock Mounts for Spherical Bearing Race Shocks (RSM)

Made in the USAIf you're installing racing rear shocks with a spherical bearing end you will need this adapter mount for the top of the rear shock. Spherical or rod-end bearings are common on race shocks but they are somewhat universal and mounts are not usually included. We designed and engineered these mounts for our E9X M3 and E90 328i IMSA/CTSCC racecars. Our cacing upper shock mount is machined out of aircraft grade aluminum with a tough anodize finish and high grade hardware. Due to the wide variety of spherical bearings and rod-ends found on race shocks, the bushing kit is sold seperately (see chart for bushing sizes).

view larger

Bearing Spacer Chart
Optional BushingsBushing Kit Part#B=Bore Dia.W=Ball WidthOptional Bushings
TSU9007B1515 mm12 mm
TSU9007B50.500" inch.500" inch>

E9X Racing Rear Spherical Upper Shock Mount Instructions

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible

Part #: TSU9006RU1
Price: $299.95 (USD) 
Free Shipping Free Shipping
3-series Strut/Shock (non-EDC) Mount Kit - E90 M3, E92 M3, E93 M3 Any change of your M3 struts and shocks should include new mounts. Installing new bushings and mounts is very easy when changing the shocks - there's no additional time or no special tools required! If you re-use the original mounts you have the risk of them failing before your next shock replacement, doubling your labor costs.

The shock mounts locate the front struts and rear shocks to the car - providing a quiet and vibration-free buffer between the road and the cabin. Shock mounts and bushings can wear out just like any other rubber part on the car. This leads to more noise and harshness reaching the chassis and may complicate your new suspension install.

This package is for cars NOT equipped with the EDC suspension.

Included in the E9X M3 Mount Kit:
  • front upper strut mounts with bearings (also known as a guide support), 31302283650
  • A. rear upper-top shock mounts, 33506771737
  • B. rear upper-middle shock mounts, 33506767010
  • C. rear upper-bottom shock mounts, 33506771738
  • D. rear upper supporting cup, 33526764418 (sits over bumpstop)
    Buy as a package and save $!!

    This item fits the following BMWs without EDC suspension
    2008-2012 E90 BMW M3 - Sedan
    2008-2012 E92 BMW M3 - Coupe
    2008-2012 E93 BMW M3 - Convertible
  • Part #: E9XM3MOUNTKIT
    Price: $279.16 (USD) 
    Free Shipping Free Shipping
    Quantity:   
    OEM Lemforder Subframe Bushing - 33312283383 - E82 E9X

    Exposure to the elements and stress/pressure can lead to failing and splitting subframe bushings. Ensure your subframe is mounted perfectly steady to prevent vibrations, knocks, suspension issues, and potential damage to the body of the vehicle or suspension components. OEM Lemforder is the perfect replacement to make sure that everything is mounted properly.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    This item fits the following BMW Chassis:
    E82, E90, E92, E93

    Part #: 33312283383
    Price: $62.12 (USD) 
    Quantity:   
    Genuine BMW Rubber Mounting - 34511162818

    Genuine BMW Rubber Mounting
    This item fits the following BMW Chassis:
    E39 M5,E60 M5,E63 M6,E46 M3,E70 X5M,E71 X6M,E82 1M Coupe,E85 Z4M,E53 48IS,E34,E36,E38,E39,E46,E53 X5,E63,E65,E70 X5,E71 X6,E82,E83 X3,E85 Z4,E86 Z4,E89 Z4,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36,F80 M3,F82 M4,F83,i3i12

    Part #: 34511162818
    Price: $4.41 (USD) 
    Quantity:   
    Rear Subframe Bushings/Mount Set - Turner Solid Aluminum - E82 1M, E9X M3 Solid rear subframe bushings for all E90 M3 & E92 M3, suggested for track/racing use only. Designed and manufactured by TMS using knowledge from many years of successful professional racing in Grand-Am Sports Car Challenge, SCCA Speed World Challenge, BMW Club, and SCCA club racing.

    A BMW's rear subframe is the heart of the suspension. When the subframe moves, so do all the suspension mounting points. Replacing the stock rubber bushings with solid ones limits both drivetrain and suspension movement, eliminating the unwanted movement and keeping your BMW's setup the way it should be. These solid mounts will also help prevent the subframe from tearing out of the chassis on your E90/E92 3 series. We spend lots of extra time machining each TMS subframe mount to keep your car as light as possible. CNC machined from high grade billet aluminum for precision and quality. These solid aluminum subframe bushings are for racing applications only, and can be used on all E90 M3 & E92 M3.

    This item fits the following BMWs:
    2011-2012 E82 BMW 1M
    2008-2012 E90 BMW M3 - Sedan
    2008-2012 E92 BMW M3 - Coupe
    2008-2012 E93 BMW M3 - Convertible
    Part #: TDR9080SRS
    Price: $299.95 (USD) 
    Free Shipping Free Shipping
    Quantity:   
    Genuine BMW Rubber Mounting Front - 33312284019 - E82,E90,E92,E93

    BMW M replacement bushing. Great stock replacement for M vehicles or as an upgraded to the non-M bushings.


    Genuine BMW Rubber Mounting Front
    This item fits the following BMW Chassis:
    E82 1M Coupe,E82,E90,E92,E93

     

    Part #: 33312284019
    Price: $31.95 (USD) 
    Quantity:   
    OEM Lemforder Camber Adjustment Bushing - 33326770829 - F80 M3, F82 M4

    Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    This item fits the following BMW Chassis:
    E82 1M Coupe,E82,E90,E92,E93,F80 M3,F82 M4,F83

    Part #: 33326770829
    Price: $11.52 (USD) 
    Quantity:   
    Front Upper Control Arm Bushing Set (FCAB) - Group N Race Rubber - E82, E9X These are the factory BMW Motorsport Group N high performance front upper control arm bushings. These heavy duty rubber bushings are stiffer than the stock bushings to improve steering feel and improve handling. They are great for track use - and Grand Am Cup legal! - yet can also be used on a street driven car - please note these will not be as compliant as the stock rubber bushings. These are for the control arm with the ball joint pointing down, sometimes referred to as the thrust arm or tension strut.

    Price is for the pair of bushings.

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i 1M
    2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
    2006-2011 E91 BMW 328i - Wagon
    2007-2012 E92 BMW 328i 335i 335is M3 - Coupe
    2007-2012 E93 BMW 328i 335i M3 - Convertible
    Part #: E9X-GPN-UCAB
    Price: $413.38 (USD) 
    Quantity:   
    Rear Shock Mounts (RSM) - (Pair) - Lower - Race Aluminum - E82, E9X

    If you're installing a rear shock on your E90 or E92 that utilizes a Spherical Bearing or Rod-End, common in racing shocks/dampers, this is one of the rear mounts needed to attach your shock to the camber arm (this is the LOWER mount). Developed for our Grand Am Cup 328i race car, this lower shock mount works on all 2006+ E90/E92 including 325i, 328i, 330i, & 335i. This price is for a pair of rear shock mounts.

    Our Racing Rear Lower Shock Mount is machined out of aircraft grade aluminum. We include both the TSU9007B15 and TSU9007B50 bushing kits with this package. (see chart for included bushing sizes).

     

    Chart

    Bushing Kit Part#B=Bore dia. W=Ball width

    TSU9007B1515 mm12 mm

    TSU9007B50.500" inch .500" inch

    Instructions for E90/E92 Race Rear Lower Shock Mount (TSU9006RU2)

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i 1M
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
    2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
    2007-2012 E93 BMW 328i 335i - Convertible

    Part #: TSU9006RU2
    Price: $169.95 (USD) 
    $239.95 (Sale - Save 29%)
    Free Shipping Free Shipping
    OEM Lemforder Trailing Arm Bushing - E82 E88 E9X E84

    Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Part #: 33326763092
    Price: $15.11 (USD) 
    Quantity:   
    Rear Shock Mounts (RSM) - Upper - OEM Rubber - E90 M3, E92 M3, E93 M3 (with EDC) (Pair) A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E90/E92/E93 M3 consist of 4 pieces. These are the mounts to fit cars equipped with the EDC suspension.

    Rear Shock Mount (RSM) Kit consists of:
    A. rear upper-top shock mounts, 33502283519
    B. rear upper-middle shock mounts, 33506767010
    C. rear upper-bottom shock mounts, 33502283518
    D. rear upper supporting cup, 33522283439 (sits over bumpstop)
    The lower mount on the M3 is integrated on the shock absorber.

    That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces.

    This item fits the following BMWs:
    2008-2011 E90 BMW M3 - Sedan
    2008-2012 E92 BMW M3 - Coupe
    2008-2012 E93 BMW M3 - Convertible
    Part #: TMS11955
    Price: $131.60 (USD) 
    Quantity:   
    Front Upper Strut/Shock Mount - Left or Right - E9X M3 On the 2008-up E9X M3 the front strut is held in place by this mount or 'guide support'. The mount not only locates the strut to the body of the car, it also contains bearings that allow the strut to move with the steering and travel of the suspension. It's rubber isolated to minimize vibrations and annoying road impacts from reaching the driver.

    The problem that we have seen is that the rubber will wear out over time, and will no longer dampen the vibrations and harshness when contacting a bump or pothole. The driver will often feel that the car does not steer as accurately and the ride is harsher. The bearings inside can also wear out, especially when dirt and sand get into the grease. Replacement will keep the steering sharp, and noise, vibration, and harshness from spreading through the chassis. It's also a good idea to replace these any time a new strut or coil over kit is going on the car.

    Price is per mount. Left and Right are the same.

    This item fits the following BMWs:
    2011-2012 E82 BMW 1M
    2008-2012 E90 BMW M3 - Sedan
    2008-2012 E92 BMW M3 - Coupe
    2008-2012 E93 BMW M3 - Convertible
    Part #: 31302283650
    Price: $114.95 (USD) 
    Quantity:   
    Genuine BMW Rear Upper Shock Mount, Upper - 33506771737 When replacing your shocks, it is always best to replace the shock mounts. This helps prevent excessive road noise and vibrations from the suspension and keeps anything from knocking or rattling. This is the top of the mount that threads onto the shock.
    Part #: 33506771737
    Price: $22.95 (USD) 
    Quantity:   
    Genuine BMW Spring Pad, Front Lower - 31336764372 - E82,E89,E90,E92,E93

    Cushions and dampens noise and vibrations from the front springs.


    Genuine BMW Spring Pad Lower
    This item fits the following BMW Chassis:
    E82 1M Coupe,E82,E89 Z4,E90,E92,E93

     

    Part #: 31336764372
    Price: $6.37 (USD) 
    Quantity:   
    Genuine BMW Camber Adjustment Bushing - 33326770829 - F80 M3, F82 M4

    Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!


    Genuine BMW Rubber Mount, Roll-Over Strut
    This item fits the following BMW Chassis:
    E82 1M Coupe,E82,E90,E92,E93,F80 M3,F82 M4,F83
     

     

    Part #: 33326770829
    Price: $33.95 (USD) 
    Quantity:   
    Front Upper Control Arm Bushing Set (FCAB) - Monoball - E82, E89, E90, E92, E93

    BMW’s are known to have failure prone front thrust arm bushings.  The flexible rubber bushings, even those found in M performance models, allow significant movement of the front wheels to maximize daily driving comfort, but also allow considerable alignment change.  This results in a disconnected and numb road feel, standing between you and a confidence inspiring driving experience.  Eventually the fluid filled rubber bushings fatigue and crack due to continual deflection and ozone degradation, and eventually the damping fluid leaks out resulting in complete failure. 

    For the enthusiast looking for superior performance and longevity with a crisp, confidence-inspiring driving experience, our sealed ball joint monoballs are the best solution available!  Our experience with spherical front control arm ball joints go back to those we designed and used in our IMSA E90 328i and E92 M3 racecars (GS class Champions in 2011).  We wanted to offer E31, E32, E34, E38, E39, E53, E60, E63, E64, and E83 owners similar levels of handling precision and control for the track and street. 

    The bearing housing is precision CNC machined from 6061-T6 anodized aluminum and features a knurled OD to ensure a perfect press fit, and utilize a sealed OEM BMW ball joint for exceptional quality and durability, making them completely at home on both the street and track with no compromise.  We have done extensive street, autocross, and track testing to ensure the ball joint used in this bushing design excels in each setting.  The advantage of a sealed ball joint is that it eliminates all unwanted deflection while still allowing complete bind-free movement throughout suspension travel, resulting in exceptional control of wheel alignment.  What you get is superior steering precision, turn-in response, direct braking feedback, and better handling.

    In short, if you're seeking the ultimate in precise, predictable handling and control, with crisp braking response and a long service life that’s equally at home on the street or track - look no further. We have you covered.

    We offer these thrust arms with the monoball bushings pre-installed for your convenience. Since BMW recommends the control arms be replaced for every other bushing change, we prefer to sell these as a pre-assembled set. The bushings are also available separately if you wish to source your own control arms.

    Features:

    Bearing housing

    • Precision CNC machined from 6061-T6 blue anodized aluminum
    • Knurled OD to provide the perfect fit for the wide range of thrust arm bore diameters among brands.
    • CNC machined 304ss ball joint sleeve inserts, providing a precision fit between the ball joint and the subframe. 

    Bearing

    • OEM BMW sealed and greased ball joint for exceptional durability and service life.

    Performance

    • Nearly instantaneous, crisp steering and braking response.
    • Maintenance free, long lasting performance. 
    • Improved road feel without undesirable NVH.

    Sold as a pair for RWD models only.

    Click here for installation instructions.

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i 1M Coupe
    2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
    2006-2012 E91 BMW 328i - Wagon
    2007-2013 E92 BMW 328i 335i 335is M3 - Coupe
    2007-2013 E93 BMW 328i 335i M3 - Convertible
    2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

    Part #: TSUE9080QIS
    Price: $299.95 (USD) 
    Free Shipping Free Shipping
    Quantity:   
    Front Upper Control Arm Bushing (FCAB) - OEM Rubber - E82 1M, E9X M3 These are the stock replacement front control arm bushings (FCAB) for the E82 1M and E9X M3 models. These solid rubber bushings replace the inner bushing on the front upper control arm, also known as the thrust arm or tension stut (it's the arm with the outer ball joint pointing down). These are the OEM bushings with a metal sleeve insert for precise but comfortable steering feel and response. A direct replacement for the E90/E92/E93 M3 and E82 1M. Professional installation recommended since these bushings need to be 'compressed' while they are being pressed in.

    This can also be used as an upgrade on non-M E82, E9X, and E89 Z4 models. The solid rubber of the M3 is a better and longer-lasting bushing than the fluid-filled stock E90 bushing. These M3 bushings are a bit stiffer than the original design so the steering and handling will be sharper while maintaining M3-levels of ride comfort.

    Sold per bushing (order 2 for both sides).

    This item is a direct fit for the following BMWs:
    2008-2012 E82 BMW 1M
    2008-2012 E90 BMW M3 Sedan
    2008-2013 E92 BMW M3 Coupe
    2008-2013 E93 BMW M3 Convertible
    This item is an upgrade for the following BMWs:
    2008-2012 E82 BMW 128i 135i
    2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
    2006-2011 E91 BMW 328i - Wagon
    2007-2012 E92 BMW 328i 335i 335is - Coupe
    2007-2012 E93 BMW 328i 335i - Convertible
    2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
    Part #: 31102283579
    Price: $58.95 (USD) 
    Quantity:   
    OEM Lemforder Front Tension Strut Bushing - E82 E9X

    Bushings tends to wear over time and split or even break free from the internal sleeve, causing excessive movement and sloppy control feel. OEM Lemförder bushings are the perfect option to restore suspension back to day 1 quality.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Part #: 31102283579
    Price: $9.72 (USD) 
    $15.95
    Limited Qty Sale
    Quantity:   
    OEM Lemforder Rear Subframe Mounting, Front - 33312283382 - E9X E82 RWD

    Exposure to the elements and stress/pressure can lead to failing and splitting subframe bushings. Ensure your subframe is mounted perfectly steady to prevent vibrations, knocks, suspension issues, and potential damage to the body of the vehicle or suspension components. OEM Lemforder is the perfect replacement to make sure that everything is mounted properly.

    Upgrade for non-M vehicles!

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    This item fits the following BMW Chassis:
    2008 - 2013 E82 BMW 128i 135i 135is 1M Coupe
    2008 - 2013 E9X BMW M3
    2007 - 2013 E93 BMW 328i 335i
    2007 - 2013 E92 BMW 328i 335i
    2009 - 2011 E91 BMW 328i
    2006 - 2009 E91 BMW 328i
    2009 - 2012 E90 BMW 323i 328i 335d 335i
    2006 - 2008 E90 BMW 323i 325i 328i 330i 335i

    Part #: 33312283382
    Price: $64.08 (USD) 
    Quantity:   
    Rear Subframe Bushings/Mounts - Set - Group N Race Rubber - E82, E9X The E82 and E90/E92 subframes have an inherent weakness in the rear subframe - the mounts are too soft for the power and torque these cars are capable of. The subframe is the heart of a BMW's rear suspension. As torque is transmitted through the differential and axles and as the tires grip the road, the subframe mounts are working to keeping everything in line. That's a tough task to hold when torque is increased with bigger boost (335i) or even mild tweaks (M3). While the M3 subframe mounts are a great upgrade for the non-M chassis these factory BMW Motorsport subframe mounts go one step further.

    These Motorsport/Group N rear subframe bushings are a direct replacement upgrade over the stock mounts. They are rubber to conform to the rules of the Group N racing class - so they are still acceptable for street use as long as extra ride harshness can be tolerated. The rear subframe has to come down from the car for these mounts to be pressed in. So now is the perfect time to do other work as well - check out our other Motorsport Race bushings or M3 upgrades.

    Price is for the set of 4 mounts.

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i 1M Coupe
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2013 E93 BMW 328i 335i M3 - Convertible
    Part #: E9X-GPN-SUBFRAME
    Price: $800.00 (USD) 
    Free Shipping Free Shipping
    Quantity:   
    Genuine BMW Rear Subframe Bushing, Front Position - 33312283382 - E9X

    This is a OE BMW standard subframe bushing for an M3. For all other vehicles, this is an upgraded bushing with a higher durometer rating than stock.

    GENUINE BMW RUBBER MOUNTING FRONT:331020

    Part #: 33312283382
    Price: $59.38 (USD) 
    Quantity:   
    Genuine BMW Spring Pad Upper - 31336767500 - E82,E89,E90,E92,E93

    Dampens noise and vibration where the spring meets the suspension and mounting points.


    Genuine BMW Spring Pad Upper -
    This item fits the following BMW Chassis:
    E82,E89 Z4,E90,E92,E93
     

     

    Part #: 31336767500
    Price: $6.81 (USD) 
    Quantity:   
    3-series Strut/Shock (EDC) Mount Kit - E90 M3, E92 M3, E93 M3 Any change of your M3 struts and shocks should include new mounts. Installing new bushings and mounts is very easy when changing the shocks - there's no additional time or no special tools required! If you re-use the original mounts you have the risk of them failing before your next shock replacement, doubling your labor costs.

    The shock mounts locate the front struts and rear shocks to the car - providing a quiet and vibration-free buffer between the road and the cabin. Shock mounts and bushings can wear out just like any other rubber part on the car. This leads to more noise and harshness reaching the chassis and may complicate your new suspension install.

    This package is for cars WITH the EDC suspension.

    Included in the E9X M3 Mount Kit:
  • front upper strut mounts with bearings (also known as a guide support), 31302283650
  • A. rear upper-top shock mounts, 33502283519
  • B. rear upper-middle shock mounts, 33506767010
  • C. rear upper-bottom shock mounts, 33502283518
  • D. rear upper supporting cup, 33522283439 (sits over bumpstop)
    Buy as a package and save $!!

    This item fits the following BMWs equipped with EDC suspension
    2008-2012 E90 BMW M3 - Sedan
    2008-2012 E92 BMW M3 - Coupe
    2008-2012 E93 BMW M3 - Convertible
  • Part #: E9XM3EDCMOUNTKIT
    Price: $351.50 (USD) 
    Free Shipping Free Shipping
    Quantity:   
    Rear Subframe Bushings/Mounts - Set - Stock M3 Rubber - E82, E9X The subframe is the heart of a BMW's rear suspension. Nearly all of the suspension arms and bushings mount to the chassis through the subframe. So as the suspension deflects forces from the tires, the subframe eventually absorbs them all. Preventing too much deflection and twist in the subframe will keep your handling and alignment consistent. The stock E82 and E90/E92 rear sub-frame mounts are very soft so putting more torque through the car results in a soft or loose (squirrely) feeling in the rear suspension. This set of 4 mounts are from the M3 and are much stiffer.

    These M3 rear subframe bushings are a direct replacement upgrade over the stock mounts. The rear subframe has to come down from the car for these mounts to be pressed in. So now is the perfect time to do other work as well. The time and effort needed to replace them is well worth it, especially on high-horsepower cars (tuned N54, N55, etc).

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
    2007-2012 E93 BMW 328i 335i - Convertible
    Part #: TMS12061
    Price: $257.80 (USD) 
    Free Shipping Free Shipping
    Quantity:   
    Rear Subframe Bushings/Mount Set - Turner Solid Delrin/Aluminum - E82 1M, E9X M3 Made in the USA These E90/E92 M3 solid rear sub-frame mounts are designed around Grand-Am, BMW CCA, and other series' regulations where a solid metal mount cannot be used. These are derived from, and currently used in our own Turner E92 M3 racecars. Thick Delrin casings are used as the non-metallic solid bushing. High quality aluminum sleeves, with increased surface area, are then pressed into each of the casings with washers integrated into each one. The washers are employed to add an extra safety factor for securing the sub-frame into position.

    The E9x M3 rear sub-frame is the heart of its suspension, and we have found with a short amount of track time the stock bushings will start to degrade. When the M3 sub-frame moves, so do all the suspension mounting points. Replacing the stock rubber bushings limits drivetrain and suspension movement, and keeps your M3's setup the way it's supposed to be. These bushings are CNC machined in the USA and made with high-grade materials.

    Feedback from a fellow tuning shop:
    "I never liked the vague feeling and lack of feedback through the rear suspension wit the stock rubber bushings. Also, with the added power of my ESS VT2-650 kit the car required slight steering corrections under WOT in a straight line due to bushing deflection and this really bothered me. It is important to note that I am ultra sensitive when it comes to NVH and other subtle noises and sensations in a car so when I say that the Delrin mounts add close to zero NVH you can trust me! If someone snuck into my garage and installed the mounts at 2am I doubt I would have ever noticed, apart from the super solid and precise feel they give at the rear of the car." Read the full thread here.

    This item fits the following BMWs:
    2010-2012 E82 BMW 1M
    2008-2012 E90 BMW M3 - Sedan
    2008-2012 E92 BMW M3 - Coupe
    2008-2012 E93 BMW M3 - Convertible
    Part #: TDR9080SM3
    Price: $499.95 (USD) 
    Free Shipping Free Shipping
    Quantity:   
    Genuine BMW Hex Bolt With Washer 33176760342

    Genuine BMW Hex Bolt With Washer - M14X110-10.9
    This item fits the following BMW Chassis:
    E39 M5,E82 1M Coupe,E53 48IS,E38,E39,E53 X5,E63,E65,E82,E90,E92,E93,F01,F02,F06,F10,F12,F13,F22,F30,i12

    Part #: 33176760342
    Price: $8.71 (USD) 
    Quantity:   
    OEM Rear Shock Mounts (RSM) - Upper - OEM Rubber - E82 1M, E9X M3 (not EDC) (Pair) A 4-piece set of new OEM rear upper and lower shock mounts to complete your shock install or replace broken mounts (RSM). The top mounts on the shocks for the E82 1M and E90/E92/E93 M3 consist of 4 pieces. These are the mounts to fit a non-EDC suspension.

    Rear Shock Mount (RSM) Kit consists of:
    A. rear upper-top shock mounts, 33506771737
    B. rear upper-middle shock mounts, 33506767010
    C. rear upper-bottom shock mounts, 33506771738
    D. rear upper supporting cup, 33526764418 (sits over bumpstop)
    The lower mount on the 1M/M3 is integrated on the shock absorber.

    That's a lot of rubber that takes constant deflecting and absorbing of cornering forces and impacts from bumps, potholes, etc. Replacing the RSMs is key to maintaining a quiet and comfortable ride. Price is for all 4 upper pieces.

    This item fits the following BMWs:
    2011-2012 E82 BMW 1M
    2008-2011 E90 BMW M3 - Sedan
    2008-2012 E92 BMW M3 - Coupe
    2008-2012 E93 BMW M3 - Convertible
    Part #: TMS11954
    Price: $49.26 (USD) 
    Quantity:   
    Rear Guide Rod Bushing - Inner - Group N Race Rubber - E82, E9X This is a BMW Motorsport Group N Rear Guide Rod Inner Bushing that features a heavy duty rubber that is stiffer than stock. The stiffer bushing reduces deflection and twist in the arm, leading to more stable handling and faster response in the suspension. These bushings are great for track use and legal for some racing classes yet can also be used on a street driven car where extra ride harshness can be tolerated.

    Sold per bushing.

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
    2007-2013 E93 BMW 328i 335i - Convertible
    Part #: 33328300878
    Price: $119.95 (USD) 
    Quantity:   
    E82, E9X Dinan Monoball Front Thrust Arm Bushings (Pair)

    For someone looking for superior performance and longevity these sealed monoball bushings are the best upper thrust bearing you can buy for an E82 1-series or E9X 3-series. The advantage of a monoball bearing is that it will not deflect under load. All of the rubber bushings move in all sorts of directions and that changes your alignment, especially when used with big brake kits or when driven hard. The condition worsens as the bushing wears out. The Dinan monoball sits in a CNC machined aluminum housing which has zero deflection. The monoball allows complete freedom of movement but only at the desired angles. What you get is superior steering precision, better handling from more consistent alignment, and almost infinite bushing life. And thanks to the inner liner and sealed rubber boots there's none of the extra noise or reduced service life of fully solid race bushings. 

    We strongly advise using these with new control arms. BMW recommends that the bushings be replaced only once per set of control arms. So if your thrust arm bushings have been replaced already then we do not recommend re-using the arms. The other reason is that the aluminum arms stretch over time which will make the bushings loose inside the arm. Other manufacturers recommend filling the stretched arms with paste but replacing the control arm is the better solution.

    For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere.

    This item fits the following BMWs:
    2008-2013 E82 E88 BMW 128i 135i 1M Coupe
    2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
    2007-2011 E91 BMW 325i 328i - Touring Wagon
    2007-2013 E92 BMW 328i 335i 335is M3 - Coupe
    2007-2013 E93 BMW 328i 335i 335is M3 - Convertible

    Part #: D280-0008
    Price: $514.00 (USD) 
    Free Shipping Free Shipping
    Quantity:   
    OEM Lemforder Trailing Arm Ball Joint - E88 E82 F22 F87 F23 E9X F30 F80 F31 34 F32 F82 F33 F83 F36

    Ball joints begin to pop and rattle after a long period of wear and tear. An OEM Lemforder ball joint is the perfect replacement to ensure complete reliability eliminate any noises from the suspension.

    OEM Lemförder is an engineering company that focuses on high-quality, precision manufacturing of critical suspension and steering components. Providing exceptionally high quality parts directly to BMW, as well as 50+ other big name automotive companies, such as Mercedes and Audi, their history of reliability and variety of offered parts makes them one of the biggest names for a go-to OEM parts provider. Lemförder parts place an important emphasis on design, production, and assembly, ensuring maximum reliability. They even coat all parts possible with corrosion protection for extended longevity.

    As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!

    Part #: 33326792553
    Price: $18.89 (USD) 
    Quantity:   


    • 1-800-280-6966
      Mon-Thur 9am-6pm ET, Fri 9am-5pm ET

      • © TurnerMotorsport.com 1993-2017. All Rights Reserved.