Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW E92 Sway Bar Kits

BMW E92 Sway Bar Kits The next step in tuning your car's handling - after shocks/springs and camber plates - should be a set of swaybars. Using larger front and rear sway bars will give your car better/quicker turn-in and less bodyroll in corners. These bars replace the existing sway bars on the car for a clean and simple upgrade with very little downside. Sway bars should be matched with your springs/shocks to maintain a proper handling balance. In some cases only a front or rear bar is needed to positively change the balance and make the car more neutral. We sell sway bar kits from H&R, Racing Dynamics, OE BMW upgrades, and even some of our own designs. Swaybars are sold with new bushings. New links and other hardware are strongly recommended.
You're currently viewing parts for your (E92) 3-Series Coupe 2007-2013. Reset your chassis
For accurate results, specify your model below.
M3 Front Sway Bar Upgrade - E82, E9X The stock E93 M3 front 28mm swaybar can be used on all of the other E90/E92 and E82 cars as a mild upgrade to reduce bodyroll, improve handling, and get quicker turn-in. This is a direct upgrade for all E82/E88/E9X (not xi AWD) when used with the bar, bushings, and hardware.

stock E90/E92 M3 sway bar size = 26.5mm
stock E9X non-M3 sway bar size = 26.5-23.0mm
stock E93 M3 sway bar size = 28-24mm


The front anti-roll bar is one of the keys to improving handling feel for the E82 and E9X. The larger bar is stiffer, which helps control the front tires and keep them in contact with the road. The front tires will bite harder into the turn, giving you more front grip. You'll see improved turn-in response, less understeer, and less body roll. This is one the best street suspension upgrades you can make for the E82/E9X cars. And there's almost no change in ride comfort or noise. Installation is simple for the front sway bar and takes about one hour. The bushings are a tight compression fit to the bar - remember to use lots of lubricant to get them to snap into place.

Required parts for installation on non-E93 M3 models:
2 x 31352283967 - Swaybar bushings (bottom)
2 x 31352283968 - Swaybar bushings (top)
2 x 31352283037 - Mounting brackets
Add these parts to your swaybar from the Options below.

The E93 M3 28mm Swaybar Upgrade is for the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is M3 - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
2008-2013 E93 BMW M3 - Convertible (not an upgrade, replacement part only)
Turner Motorsport
Part #: 31352283965
Price: $362.36 (USD) 
$387.91 (Sale - Save 7%)
Ships in 4 days
Free Shipping Free Shipping
H&R Sway Bar Kit - E9X M3
  • 27mm Front Sway Bar
  • 23mm Rear Sway Bar

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension’s roll stiffness—or its resistance to roll in turns—while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip.

    This item fits the following BMWs:
    2011+ E82 BMW 1M Coupe
    2006+ E90 BMW M3 Sedan
    2007+ E92 BMW M3 Coupe
    2007+ E93 BMW M3 Convertible
  • H&R
    Part #: 70053-71053
    Price: $579.90 (USD) 
    In Stock
    Quantity:   
    H&R Rear Sway Bar - E9X M3 - 23mm
  • 23mm
  • Reduces body roll
  • Highest tensile strength available

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension’s roll stiffness—or its resistance to roll in turns—while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness—giving you an unmatched level of precision and performance. Designed for use with stock bushings. Either re-use stock bushings or purchase new stock bushings.

    This item fits the following BMWs:
    2011+ E82 BMW 1M Coupe
    2006+ E90 BMW M3
    2007+ E92 BMW M3
    2007+ E93 BMW M3
  • H&R
    Part #: 71053
    Price: $289.95 (USD) 
    Direct Ship
    H&R Front Sway Bar - E9X M3 - 27mm
    • 52% stiffer than the factory E90/E92 M3 bar. 42% stiffer than the E93 M3 bar!
    • 27mm straight across (not a tapered center like the E93 M3 factory bar)
    • Solid core, not hollow like the stock bars (better at resisting twist)
    • Forged, non-adjustable steel ends
    • Highest tensile steel strength available

    The H&R for the E9X M3 is the best anti-roll bar option for the E9X M3. Don't be let down by the "small" size compared to the factory sway bar sizes - there are some big differences! We've had our in-house suspension engineers run the math and the H&R swaybar is over 52% stiffer than the factory E90/E92 M3 bar and even over 42% stiffer than the E93 M3 sway bar upgrade. There are several reasons for this - the stock sway bars are hollow (for lighter weight) and will twist more than the solid H&R bar. Also, the E93 M3 bar is often called a 28mm bar but it actually tapers down in the center to 24mm which greatly reduces its effectiveness. So if you're looking for a serious sway bar upgrade, the H&R is clearly the way to go. Note: to maintain the handling balance of the car, we recommend only using the front bar with the matching H&R rear bar or heavily revised racing suspension.

    For a more in-depth analysis of the E9X front sway bar differences, check out our FAQ!

    This bar re-uses the factory M3 sway bar bushings and brackets.

    This item fits the following BMWs:
    2011+ E82 BMW 1M Coupe
    2008+ E90 BMW M3
    2008+ E92 BMW M3

     

    H&R
    Part #: 70053
    Price: $289.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    E9X M3 Turner Motorsport Racing Blade-Style Front Sway Bar Kit

    Racers no longer have to struggle with sourcing the ultimate M3 front sway bar - this is it. The infinitely adjustable finishing touch to a highly advanced racing suspension package.

    Throughout our years of racing the E92 M3 we have experimented with many different suspension configurations. All this development has allowed us to design and manufacture exactly what the E9X M3 needs for a front sway bar. Our blade type infinitely adjustable bar is intended for track / race cars with a dry-sump oiling system. It will not fit street cars due to interference between the bar and the bottom of the stock oil pan (dry sump systems allow a much thinner oil pan).

    This bar is 1.25"x.95" diameter steel tube with a minimum of bends and adjustable blade-style ends. It is very rigid yet tuned perfectly to work with the rest of our suspension. The bar is solidly mounted using aluminum blocks with a rubber isolating liner. The front subframe/engine cradle must be modified for use with these brackets to allow the bar to clear other suspension components. You can modify your existing subframe or purchase one of our pre-modified pieces and exchange your original ($627.07 core charge applies). Our modified subframes also include reinforcing gusseting for the lower control arm mounts and other tricks from our racing department.

    For those unfamiliar with blade-style bars, the angle and orientation of the blade determines its torsional resistance. The flatter and more perpendicular to the road the more it will flex. Turning the blade on its side will make it more resitant to twisting and bending. This is the setup our own race team specified after years of racing - and winning - with the E92 M3 with driver feedback from Bill Auberlen, Joey Hand, and Boris Said.

    Racing-spec Front Sway Bar Upgrade includes:

     

    • tubular bar with serviceable end-bearings
    • blade-style ends
    • adjustable sway bar links
    • bar mounting blocks with collars and liners
    • all sway bar hardware
    • optional modified front subframe
    • Requires: dry-sump oil system

      This item fits the following BMWs:
      2008-2011 E90 BMW M3 - Sedan
      2008-2013 E92 BMW M3 - Coupe

     

    Turner Motorsport
    Part #: TMS176973
    Price: $3836.37 (USD) 
    Ships in 3 Days
    Free Shipping Free Shipping
    H&R Rear Sway Bar - E90/E92/E93 Coupe, Sedan, Convertible  2006+ 20mm fixed bar (no adjustments); bushings included.

  • Reduces body roll
  • Highest tensile strength available
    H&R Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. Swaybars increase your suspension’s roll stiffness — its resistance to roll in turns — while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. Adding just a rear swaybar to your E9X (i or xi) can make a dramatic improvement in reducing understeer and improving handling balance. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness—giving you an unmatched level of precision and performance.

    This item fits the following BMWs:
    2006+ E90 BMW 325i 325xi 328i 330i 335i - Sedan
    2008+ E90 BMW 335d - Sedan
    2007+ E92 BMW 328i 335i 335is - Coupe
    2007+ E93 BMW 328i 335i - Convertible
  • H&R
    Part #: 71490
    Price: $238.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    H&R Rear Sway Bar - E9X M3 - 23mm
  • 23mm
  • Reduces body roll
  • Highest tensile strength available

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension’s roll stiffness—or its resistance to roll in turns—while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness—giving you an unmatched level of precision and performance. Designed for use with stock bushings. Either re-use stock bushings or purchase new stock bushings.

    This item fits the following BMWs:
    2011+ E82 BMW 1M Coupe
    2006+ E90 BMW M3
    2007+ E92 BMW M3
    2007+ E93 BMW M3
  • H&R
    Part #: 71053
    Price: $289.95 (USD) 
    Direct Ship
    Quantity:   
    E82/E9X ECS Tuning 28mm Performance Front Sway Bar

    E82/E9X 28mm front sway bar with urethane bushings.

    Sway bars are typically sold as a front and rear set to balance the handling. But a front sway bar only can also have excellent benefits, especially on a street car. Going with a larger front bar will improve steering and handling even at low-moderate speeds. Steering turn-in is faster and gives the car a more direct and responsive feel. Cars with staggered wheel fitments (a narrower front wheel compared to the rear) will especially benefit from this and help the front tire 'bite' into the road. 

    ECS has specified a 28mm sway bar that has been fine-tuned for use on the E9X and E82 models. Urethane bushings with a reinforced inner core that requires no lubrication are included. 

    This item fits the following BMWs: 
    2008-2013 E82 E88 BMW 128i 135i 1M Coupe
    2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
    2007-2011 E91 BMW 325i 328i - Touring Wagon
    2007-2013 E92 BMW 328i 335i 335is M3 - Coupe
    2007-2013 E93 BMW 328i 335i 335is M3 - Convertible

    ECS
    Part #: 007278ECS01A
    Price: $209.95 (USD) 
    In Stock
    Quantity:   
    AFe Control Sway Bar Set - E90/2 335i 2007-2013

    The aFe Control Sway Bar Set is a great upgrade option for your high performance BMW. Its front and rear 2-way adjustable, tubular design is stiff but balanced to keep your car flat and neutral in tight turns. CNC bent bars and CNC machined and TIG welded bar ends plus a 2-stage powder coated finish make these bars very high quality and durable enough to withstand years of abuse and still look great. Included are CNC machined 6061-T6 rear sway bushing brackets that are anodized black and polyurethane bushings.

    Product Features:

    • CNC Bent, Lightweight Tubular Alloy Steel 32mm Front, 29mm Rear Sway Bars
    • 2 Position Adjustable, CNC Machined, TIG Welded Bar Ends
    • Includes Polyurethane Bushings and CNC Machined 6061-T6 Aluminum Brackets (Rear)
    • 2 Stage Tangerine Orange, Powder-coated Finish
    • Direct Fit Installation, Requires No Modifications
    AFE
    Part #: 440-503003-N
    Price: $695.00 (USD) 
    Direct Ship
    Quantity:   
    E9X M3 Modified Subframe For Use With Turner Racing Front Sway Bar

    Fitment of the ultimate M3 front sway bar (the Turner Motorsport Racing-Blade Style, that is) requires modifications to be made to the front subframe for proper clearance. We've taken half of the effort out by offering a modified subframe for ease of installation. By utilizing this subframe in concert with our racing sway bar kit and a dry sump oiling system, your track or race car is a step closer to a dialed-in front end.

    This subframe includes reinforcing gusseting for the lower control arm mounts and other improvements from our racing department. 

    See T340455 for this subframe with our sway bar kit.

    $627.07 core charge is included in this price and is refunded on receipt of your original subframe.

    Turner Motorsport
    Part #: tga2283440kt
    Price: $1441.36 (USD) 
    Ships in 3 Days
    Quantity:   
    H&R Front Sway Bar - E90/E92/E93 Coupe, Sedan, Convertible (non-Xi) As Used on Project E92 335i
    27mm fixed bar (no adjustments); bushings included.

  • Reduces body roll
  • Highest tensile strength available

    H&R Sport Sway Bars are designed for drivers who desire improved handling without lowering or affecting ride quality. H&R Sport Sway Bars increase your suspension?s roll stiffness?or its resistance to roll in turns?while maintaining ride comfort and dramatically increasing cornering control, lateral stability, and grip. A unique feature of H&R Sport Sway Bars are the smooth, machined-like forged ends that, for specific vehicles, allow for adjustability in stiffness?giving you an unmatched level of precision and performance.

    This item fits the following BMWs:
    2006+ E90 BMW 325i 325xi 328i 330i 335i - Sedan
    2008+ E90 BMW 335d - Sedan
    2007+ E92 BMW 328i 335i 335is - Coupe
    2007+ E93 BMW 328i 335i - Convertible
  • H&R
    Part #: 70490
    Price: $287.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    E9X M3 Dinan Tubular Adjustable Front Anti-Roll Bar - 32mm

    Dinan sway bars are carefully engineered to match the driving dynamics of each BMW chassis. Dinan's research and development finds the ideal balance between improved handling while maintaining a comfortable ride. This set has been fine-tuned for the E90/E92 M3 chassis to reduce bodyroll, improve steering and turn-in response, and reduce understeer. The front bar is hollow tubular steel for light weight with adjustable ends to dial in the handling characteristics. This bar works best with Dinan shocks and springs or a similar sport suspension.

    Dinan E9X Sway Bar Specs:
    F: 32mm, hollow, 3-position adjustable, adjustable links, urethane bushings, and brackets included
    R: this front bar has been tuned to work with the stock rear bar

    For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This sway bar is worth 1 point towards your Dinan badge.

    This item fits the following BMWs:
    2008-2013 E90 E92 E93 BMW M3 Sedan, Coupe, Convertible

    Dinan
    Part #: D120-0520
    Price: $529.42 (USD) 
    In Stock
    Quantity:   
    AFe Control Sway Bar Set 2008-2013

    The aFe Control Sway Bar Set is a great upgrade option for your high performance BMW. Its front and rear, tubular design is stiff but balanced to keep your car flat and neutral in tight turns. CNC bent bars and CNC machined and TIG welded bar ends plus a 2-stage powder coated finish make these bars very high quality and durable enough to withstand years of abuse and still look great. Included are CNC machined 6061-T6 rear sway bushing brackets that are anodized black and polyurethane bushings.

    Product Features:

    • CNC Bent, Lightweight Tubular Alloy Steel 32mm Front, 29mm Rear Sway Bars
    • 2 Position, CNC Machined, TIG Welded Bar Ends
    • Includes Polyurethane Bushings and CNC Machined 6061-T6 Aluminum Brackets (Rear)
    • 2 Stage Tangerine Orange, Powder-coated Finish
    • Direct Fit Installation, Requires No Modifications
    AFE
    Part #: 440-503006-N
    Price: $660.25 (USD) 
    In Stock
    Quantity:   
    E82 128/135, E9X 325i/328i/330i/335i RWD Dinan Sway Bar Set

    Dinan sway bars are carefully engineered to match the driving dynamics of each BMW chassis. Dinan's research and development finds the ideal balance between improved handling while maintaining a comfortable ride. This set has been fine-tuned for the E90/E92 chassis to reduce bodyroll, improve steering and turn-in response, and reduce understeer. The front bar is hollow tubular steel for light weight with adjustable ends to dial in the handling characteristics. The rear bar is non-adjustable. These are the same sway bars used in Dinan's Stage 1 suspension and work best with Dinan shocks and springs or a similar sport suspension and wider rear tires.

    Dinan E9X Sway Bar Specs:
    F: 28mm, hollow, 2-position adjustable, adjustable links, urethane bushings, and brackets included
    R: 15.8mm, solid, non-adjustable, urethane bushings included

    For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. Each sway bar is worth 1 point towards your Dinan badge.

    Note: main image may not match actual sway bars.

    This item fits the following BMWs:
    2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
    2007-2011 E91 BMW 325i 328i - Touring Wagon
    2007-2013 E92 BMW 328i 335i 335is - Coupe
    2007-2013 E93 BMW 328i 335i 335is - Convertible

    Dinan
    Part #: E9XR30D120
    Price: $826.06 (USD) 
    Direct Ship
    Quantity:   
    E82/E9X ECS Tuning 28/15 Performance Sway Bar Kit

    To reduce the understeering affects of a staggered wheel setup you want a balanced set of sway bars. ECS has configured this anti-roll bar set for E82 1-series and E9X 3-series with a 28mm front bar and a 15mm rear bar. This kit is designed to help reduce the amount of body roll when cornering and enhance response when turning. These anti-roll bars include urethane bushings with a reinforced inner liner that eliminates squeaks and doesn't require lubrication. The bars are powder coated for durability and good looks.

    These bars fit in the stock locations using the existing brackets and links. Adjustable links are not required but recommended if the car is lowered or if you have coil overs.

    This item fits the following BMWs: 
    2008-2013 E82 E88 BMW 128i 135i 1M Coupe
    2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
    2007-2011 E91 BMW 325i 328i - Touring Wagon
    2007-2013 E92 BMW 328i 335i 335is M3 - Coupe
    2007-2013 E93 BMW 328i 335i 335is M3 - Convertible

    ECS
    Part #: 007278ecsKT1
    Price: $369.95 (USD) 
    Ships on Jun 1, 2018
    Quantity:   
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook