BMW Stainless Steel Brake Lines for BMW 3 Series E92 (2007-2013)

Clear BMW chassis
Stainless brake lines are a must for any track driven BMW and make a great upgrade on street cars as well. Brake lines should be replaced every few years anyway and braided stainless lines offer an additional layer of protection. Rubber brake lines deteriorate from the outside and inside. The external rubber can become stiff, crack, or get damaged by debris. The stainless braiding and Teflon inner coating help protect the outside of the line from debris. And with a stronger material the line will not expand or swell under extreme braking conditions. Stainless brake lines provide a firmer positive pedal feel under hard braking by greatly reducing the expansion that can be found in stock rubber lines. The internal of old stock rubber lines can become constricted over time even if the exterior looks normal. With a blockage or restriction you can have serious braking issues that often go mis-diagnosed as warped rotors, stuck calipers, or bad ball joints. Make sure you don't overlook your brake lines! All brake lines, rubber or stainless, should be replaced every few years and any time you replace a brake caliper.

These are the highest quality stainless brake lines that meet DOT specs at great prices. Our lines are made with stainless braiding and Teflon inner lines. The fittings are the correct BMW type and sizing and with swaged fittings and an additional rubber boot for protection.

ECS Tuning Exact-Fit Stainless Steel Brake Lines (Rear) - E82 1 M Coupe, E9X M3
ECS Tuning Exact-Fit Stainless Steel Brake Lines (Rear) - E82 1 M Co...
ECS Exact-Fit stainless reinforced brake lines ensure con...
ECS - Corporate Logo
T#:552893
Part#: 025321ECS04
On Order, ETA Jan 23, 2019
$56.95
Free Shipping on orders $99 and up
ECS Exact-Fit stainless reinforced brake lines ensure consistent and reliable stopping power - ECS's stainless steel lines help maintain consistent brake pressure, while capitalizing on the inherent benefits of stainless steel. If you are already planning on replacing your factory lines due to your vehicle's age, ECS's stainless steel brake lines are a great solution. Factory rubber lines expand under heavy braking, even when new. This causes sloppy pedal feel and overall poor performance. ECS reinforces their exact fit lines with braided stainless steel mesh, creating expansion resistance - this enhances pedal feel and improves performance. Their red polymer coating provides protection from the elements and abrasion that commonly affect brake lines. ECS Exact-Fit stainless lines are manufactured to comply with DOT (U.S. Department of Transportation) FMVSS 106 standards. All lines are made on dedicated, DOT-compliant brake equipment, with every line being tested to 3000 psi prior to shipment.
ECS Tuning Exact-Fit Stainless Steel Brake Lines (Rear) - E9X E82/88 E84 F30 F31 F33 F34 F32 F36 F22 F23
ECS Tuning Exact-Fit Stainless Steel Brake Lines (Rear) - E9X E82/88...
ECS Exact-Fit stainless reinforced brake lines ensure con...
ECS - Corporate Logo
T#:554294
Part#: 025321ECS01
In Stock
Sale - Save 20% $52.95
$42.36
Free Shipping on orders $99 and up
Sale - Save 20% $52.95
$42.36
Free Shipping on orders $99 and up
ECS Exact-Fit stainless reinforced brake lines ensure consistent and reliable stopping power - ECS's stainless steel lines help maintain consistent brake pressure, while capitalizing on the inherent benefits of stainless steel.&Newline; &Newline; If you are already planning on replacing your factory lines due to your vehicle's age, ECS's stainless steel brake lines are a great solution. Factory rubber lines expand under heavy braking, even when new. This causes sloppy pedal feel and overall poor performance. ECS reinforces their exact fit lines with braided stainless steel mesh, creating expansion resistance - this enhances pedal feel and improves performance. Their red polymer coating provides protection from the elements and abrasion that commonly affect brake lines.&Newline; &Newline; ECS Exact-Fit stainless lines are manufactured to comply with DOT (U.S. Department of Transportation) FMVSS 106 standards. All lines are made on dedicated, DOT-compliant brake equipment, with every line being tested to 3000 psi prior to shipment.
ECS Tuning Exact-Fit Stainless Steel Brake Lines (Front) - E9X xi Models
ECS Tuning Exact-Fit Stainless Steel Brake Lines (Front) - E9X xi Mo...
ECS Exact-Fit stainless reinforced brake lines ensure con...
ECS - Corporate Logo
T#:361167
Part#: ECS51028KT
In Stock
Sale - Save 20% $62.95
$50.36
Free Shipping on orders $99 and up
Sale - Save 20% $62.95
$50.36
Free Shipping on orders $99 and up
ECS Exact-Fit stainless reinforced brake lines ensure consistent and reliable stopping power - ECS's stainless steel lines help maintain consistent brake pressure, while capitalizing on the inherent benefits of stainless steel.&Newline; &Newline; If you are already planning on replacing your factory lines due to your vehicle's age, ECS's stainless steel brake lines are a great solution. Factory rubber lines expand under heavy braking, even when new. This causes sloppy pedal feel and overall poor performance. ECS reinforces their exact fit lines with braided stainless steel mesh, creating expansion resistance - this enhances pedal feel and improves performance. Their red polymer coating provides protection from the elements and abrasion that commonly affect brake lines.&Newline; &Newline; ECS Exact-Fit stainless lines are manufactured to comply with DOT (U.S. Department of Transportation) FMVSS 106 standards. All lines are made on dedicated, DOT-compliant brake equipment, with every line being tested to 3000 psi prior to shipment.

ECS Tuning Exact-Fit Stainless Steel Brake Line (Front) - E82 1 M Coupe, E9X M3
ECS Tuning Exact-Fit Stainless Steel Brake Line (Front) - E82 1 M Co...
ECS Exact-Fit stainless reinforced brake lines ensure con...
ECS - Corporate Logo
T#:552891
Part#: 025321ECS03
In Stock
Sale - Save 20% $68.95
$55.16
Free Shipping on orders $99 and up
Sale - Save 20% $68.95
$55.16
Free Shipping on orders $99 and up
ECS Exact-Fit stainless reinforced brake lines ensure consistent and reliable stopping power - ECS's stainless steel lines help maintain consistent brake pressure, while capitalizing on the inherent benefits of stainless steel.&Newline; &Newline; If you are already planning on replacing your factory lines due to your vehicle's age, ECS's stainless steel brake lines are a great solution. Factory rubber lines expand under heavy braking, even when new. This causes sloppy pedal feel and overall poor performance. ECS reinforces their exact fit lines with braided stainless steel mesh, creating expansion resistance - this enhances pedal feel and improves performance. Their red polymer coating provides protection from the elements and abrasion that commonly affect brake lines.&Newline; &Newline; ECS Exact-Fit stainless lines are manufactured to comply with DOT (U.S. Department of Transportation) FMVSS 106 standards. All lines are made on dedicated, DOT-compliant brake equipment, with every line being tested to 3000 psi prior to shipment.

ECS Tuning Exact-Fit Stainless Steel Brake Lines (Mid) - E82/88 E84 E9X
ECS Tuning Exact-Fit Stainless Steel Brake Lines (Mid) - E82/88 E84 ...
ECS Exact-Fit stainless reinforced brake lines ensure con...
ECS - Corporate Logo
T#:554293
Part#: 025321ECS02
In Stock
$47.95
Free Shipping on orders $99 and up
ECS Exact-Fit stainless reinforced brake lines ensure consistent and reliable stopping power - ECS's stainless steel lines help maintain consistent brake pressure, while capitalizing on the inherent benefits of stainless steel. If you are already planning on replacing your factory lines due to your vehicle's age, ECS's stainless steel brake lines are a great solution. Factory rubber lines expand under heavy braking, even when new. This causes sloppy pedal feel and overall poor performance. ECS reinforces their exact fit lines with braided stainless steel mesh, creating expansion resistance - this enhances pedal feel and improves performance. Their red polymer coating provides protection from the elements and abrasion that commonly affect brake lines. ECS Exact-Fit stainless lines are manufactured to comply with DOT (U.S. Department of Transportation) FMVSS 106 standards. All lines are made on dedicated, DOT-compliant brake equipment, with every line being tested to 3000 psi prior to shipment.
Stoptech Stainless Steel Brake Lines - E90/E92/E93/E82 325i 328i 330i 335i 128i 135i
Stoptech Stainless Steel Brake Lines - E90/E92/E93/E82 325i 328i 330...
These braided stainless steel lines for the 2006+ E9X 3 S...
StopTech - Corporate Logo
T#:2852
Part#: PLBE9X335I
In Stock
$124.95
Free Shipping
These braided stainless steel lines for the 2006+ E9X 3 Series and 2008+ E82 1 series improve the performance and safety of your BMW's braking system. They are DOT and German TUV approved, feature a resilient coating to protect against wear and chafing, and offer tremendous quality at a phenomenal price. These brake lines are made by renowned brake experts, Stoptech, and are ready for the rigors of daily street driving, driving schools, autocross and race events. Each set includes 6 brake lines as well as pre-installed grommets on the front for ideal fit.

Stoptech Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

StopTech brake lines consist of a PTFE (commonly referred to as Teflon) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

These stainless brake lines fit the following BMWs:
2006+ E90 E92 E93 BMW 325i 328i 330i 335d 335i (RWD models)
2008+ E82 E88 BMW 128i 135i

E9X M3 Stoptech Stainless Steel Brake Lines (2008+ E90/E92 M3)
E9X M3 Stoptech Stainless Steel Brake Lines (2008+ E90/E92 M3) ...
These braided stainless steel lines for the 2008 and newe...
StopTech - Corporate Logo
T#:2530
Part#: PLBE9XM3
In Stock
$124.95
Free Shipping

These braided stainless steel lines for the 2008 and newer E9X M3 improve the performance and safety of your M3's braking system. They are DOT and German TUV approved, feature a resilient coating to protect against wear and chafing, and offer tremendous quality at a phenomenal price. These brake lines are made by renowned brake experts, Stoptech, and are ready for the rigors of daily street driving, driving schools, autocross and race events. They fit all 2008, 2009, 2010 (and newer) BMW M3 V8. Each set includes 6 brake lines as well as pre-installed grommets on the front for ideal fit.

Stoptech Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

StopTech brake lines consist of a PTFE (commonly referred to as Teflon) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

These stainless brake lines fit the following BMWs:
2011 E82 BMW 1M Coupe
2008-2013 E90 M3 sedan
2008-2013 E92 M3 coupe
2008-2013 E93 M3 convertible
Stoptech Stainless Steel Brake Lines - E90/E92 335xi,  335i xDrive
Stoptech Stainless Steel Brake Lines - E90/E92 335xi, 335i xDrive ...
These braided stainless steel lines for the 2007-2011 E9X...
StopTech - Corporate Logo
T#:12016
Part#: PLBE9X335XI
In Stock
$124.95
$124.95
These braided stainless steel lines for the 2007-2011 E9X 335xi improve the performance and safety of your BMW's braking system. They are DOT and German TUV approved, feature a resilient coating to protect against wear and chafing, and offer tremendous quality at a phenomenal price. These brake lines are made by renowned brake experts, Stoptech, and are ready for the rigors of daily street driving, driving schools, autocross and race events. Each set includes 4 brake lines - 2 front and 2 rear - as well as pre-installed grommets on the front for ideal fit.

Stoptech(r) Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age.

StopTech(r) brake lines consist of a PTFE (commonly referred to as Teflon(r)) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid.

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings.

These stainless brake lines fit the following BMWs:
2007-2011 E90 BMW 335xi 335i xDrive - Sedan
2007-2013 E92 BMW 335xi 335i xDrive - Coupe

ECS Tuning Exact-Fit Stainless Steel Brake Lines (Full Kit) - E82 1 M Coupe, E9X M3
ECS Tuning Exact-Fit Stainless Steel Brake Lines (Full Kit) - E82 1 ...
ECS Exact-Fit stainless reinforced brake lines ensure con...
ECS - Corporate Logo
T#:369251
Part#: E9XM3SSKT
On Order, ETA Jan 23, 2019
$131.95
Free Shipping
ECS Exact-Fit stainless reinforced brake lines ensure consistent and reliable stopping power - ECS's stainless steel lines help maintain consistent brake pressure, while capitalizing on the inherent benefits of stainless steel. If you are already planning on replacing your factory lines due to your vehicle's age, ECS's stainless steel brake lines are a great solution. Factory rubber lines expand under heavy braking, even when new. This causes sloppy pedal feel and overall poor performance. ECS reinforces their exact fit lines with braided stainless steel mesh, creating expansion resistance - this enhances pedal feel and improves performance. Their red polymer coating provides protection from the elements and abrasion that commonly affect brake lines. ECS Exact-Fit stainless lines are manufactured to comply with DOT (U.S. Department of Transportation) FMVSS 106 standards. All lines are made on dedicated, DOT-compliant brake equipment, with every line being tested to 3000 psi prior to shipment.

ECS Tuning Exact-Fit Stainless Steel Brake Lines (Full Kit) - E9X xDrive 3 Series
ECS Tuning Exact-Fit Stainless Steel Brake Lines (Full Kit) - E9X xD...
ECS Exact-Fit stainless reinforced brake lines ensure con...
ECS - Corporate Logo
T#:369784
Part#: E9XI34KT
In Stock
$131.95
Free Shipping
ECS Exact-Fit stainless reinforced brake lines ensure consistent and reliable stopping power - ECS's stainless steel lines help maintain consistent brake pressure, while capitalizing on the inherent benefits of stainless steel. If you are already planning on replacing your factory lines due to your vehicle's age, ECS's stainless steel brake lines are a great solution. Factory rubber lines expand under heavy braking, even when new. This causes sloppy pedal feel and overall poor performance. ECS reinforces their exact fit lines with braided stainless steel mesh, creating expansion resistance - this enhances pedal feel and improves performance. Their red polymer coating provides protection from the elements and abrasion that commonly affect brake lines. ECS Exact-Fit stainless lines are manufactured to comply with DOT (U.S. Department of Transportation) FMVSS 106 standards. All lines are made on dedicated, DOT-compliant brake equipment, with every line being tested to 3000 psi prior to shipment.
Sparta Evolution Braided Stainless Steel OE Replacement Brake Lines - E9X
Sparta Evolution Braided Stainless Steel OE Replacement Brake Lines ...
Sparta Evolution is a Seattle, Washington based manufactu...
Sparta Evolution - Corporate Logo
T#:567198
Part#: SBL.M1.618
Direct Ship
New Item
$129.95
$129.95

Sparta Evolution is a Seattle, Washington based manufacturing company that specializes in the research and development of premium brake kits that compete with the likes of Brembo, Wilwood, and Stop Tech. Only after a long process of testing and fine-tuning of each individual brake kit for a specific car has met strict standards, do they look at mass production. This is to ensure all brake kits are compatible with stock ABS and traction control systems and peak braking performance on and off of the track.

Stainless steel brake lines provide better pedal feel for an improved driving experience. These lines are surrounded by a tight braided stainless steel weave which prevents the line from swelling when brake pressure reaches high levels, such as a quick stop or long hard dive into a corner.

Features:

  • Stainless Steel Braided Brake Line
  • Teflon Coated to guard against wear and tear
  • OEM designs to utilize OEM fittings on the vehicle side
  • Lines are designed with OEM grommet locations for clearance purposes
  • Banjo fittings for caliper side
  • DOT/TUV Approved

This part fits the following BMWs:
2007 - 2013 E92 328i 328xi 335i 335xi
2009 - 2011 E91 328i 328xi
2006 - 2009 E91 325xi 328i 328xi
2009-2012 E90 323i 323i 328i 328xi 335d 335i 335i xDrive 335xi
2006 - 2008 E90 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi

AR Design Burnout Perfection Line Lock Kit E82 E90 E92 135i 335i M3
AR Design Burnout Perfection Line Lock Kit E82 E90 E92 135i 335i M3 ...
Do you want to do burnouts without having to worry about ...
AR Design - Corporate Logo
T#:381634
Part#: AR-01-04006
Direct Ship
$371.07
Free Shipping

Do you want to do burnouts without having to worry about messing with the break pedal and clutch? The Burnout Perfection Line Lock Kit from AR Design can make doing burnouts much easier! Using two solenoids that lock up your front brakes only, all you have to do is give it some gas. This is great for when you need to warm up your tires at a track/strip or even just for fun and show.

This kit includes the following:

  • 2 line lock solenoids - rated to 3,000PSI and designed to withstand extreme temperatures
  • 2 custom mounting brackets
  • 2 sets of DOT-approved stainless brake lines
  • 2 brake fitting adapters
  • Needed wiring to connect to a switch.


Sparta Evolution Braided Stainless Steel OE Replacement Brake Lines - E92 M3
Sparta Evolution Braided Stainless Steel OE Replacement Brake Lines ...
Sparta Evolution is a Seattle, Washington based manufactu...
Sparta Evolution - Corporate Logo
T#:567205
Part#: SBL.M1.613
Direct Ship
New Item
$129.95
$129.95

Sparta Evolution is a Seattle, Washington based manufacturing company that specializes in the research and development of premium brake kits that compete with the likes of Brembo, Wilwood, and Stop Tech. Only after a long process of testing and fine-tuning of each individual brake kit for a specific car has met strict standards, do they look at mass production. This is to ensure all brake kits are compatible with stock ABS and traction control systems and peak braking performance on and off of the track.

Stainless steel brake lines provide better pedal feel for an improved driving experience. These lines are surrounded by a tight braided stainless steel weave which prevents the line from swelling when brake pressure reaches high levels, such as a quick stop or long hard dive into a corner.

Features:

  • Stainless Steel Braided Brake Line
  • Teflon Coated to guard against wear and tear
  • OEM designs to utilize OEM fittings on the vehicle side
  • Lines are designed with OEM grommet locations for clearance purposes
  • Banjo fittings for caliper side
  • DOT/TUV Approved

This part fits the following BMWs:
2008-2013 E92 BMW M3

ECS Tuning Exact-Fit Stainless Steel Brake Lines (Full Kit) - E82/88 E9X Non-M RWD
ECS Tuning Exact-Fit Stainless Steel Brake Lines (Full Kit) - E82/88...
ECS Exact-Fit stainless reinforced brake lines ensure con...
ECS - Corporate Logo
T#:369001
Part#: E9X34KT
On Order, ETA Jan 28, 2019
$131.95
Free Shipping
ECS Exact-Fit stainless reinforced brake lines ensure consistent and reliable stopping power - ECS's stainless steel lines help maintain consistent brake pressure, while capitalizing on the inherent benefits of stainless steel. If you are already planning on replacing your factory lines due to your vehicle's age, ECS's stainless steel brake lines are a great solution. Factory rubber lines expand under heavy braking, even when new. This causes sloppy pedal feel and overall poor performance. ECS reinforces their exact fit lines with braided stainless steel mesh, creating expansion resistance - this enhances pedal feel and improves performance. Their red polymer coating provides protection from the elements and abrasion that commonly affect brake lines. ECS Exact-Fit stainless lines are manufactured to comply with DOT (U.S. Department of Transportation) FMVSS 106 standards. All lines are made on dedicated, DOT-compliant brake equipment, with every line being tested to 3000 psi prior to shipment.
ECS Tuning Exact-Fit Stainless Steel Brake Lines (Front) - E9X E82/88 Z4
ECS Tuning Exact-Fit Stainless Steel Brake Lines (Front) - E9X E82/8...
ECS Exact-Fit stainless reinforced brake lines ensure con...
ECS - Corporate Logo
T#:556196
Part#: 024422ECS01
On Order, ETA Jan 28, 2019
New Item
Sale - Save 20% $62.95
$50.36
Sale - Save 20% $62.95
$50.36
ECS Exact-Fit stainless reinforced brake lines ensure consistent and reliable stopping power - ECS's stainless steel lines help maintain consistent brake pressure, while capitalizing on the inherent benefits of stainless steel.&Newline; &Newline; If you are already planning on replacing your factory lines due to your vehicle's age, ECS's stainless steel brake lines are a great solution. Factory rubber lines expand under heavy braking, even when new. This causes sloppy pedal feel and overall poor performance. ECS reinforces their exact fit lines with braided stainless steel mesh, creating expansion resistance - this enhances pedal feel and improves performance. Their red polymer coating provides protection from the elements and abrasion that commonly affect brake lines.&Newline; &Newline; ECS Exact-Fit stainless lines are manufactured to comply with DOT (U.S. Department of Transportation) FMVSS 106 standards. All lines are made on dedicated, DOT-compliant brake equipment, with every line being tested to 3000 psi prior to shipment.

Select Vehicle