click to Chat Live
Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart
Home
Categories
Specials Gifts & Clothing
  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages
Brakes
  1. Brake Overhaul Packages
  2. Brake Pads
  3. Brake Pad Sensors
  4. Brake Rotors
  5. StopTech Big Brake Kits
  6. Brembo Big Brake Kits
  7. Stainless Steel Brake Lines
  8. Brake Fluid
  9. Brake Calipers
  10. Caliper Rebuild Kits
  11. Parking Brake Parts
  12. ABS/DSC System Parts
  13. Brake Cooling Ducts & Backing Plates
  14. Brake Pads - Brembo GT BBK Calipers
  15. Brake Pads - StopTech BBK Calipers
  16. Hydraulic Hand Brakes
Car Care & Accessories
  1. Car Covers
  2. Wheel & Tire Cleaning
  3. Wax, Polish and Cleaning Supplies
  4. Detailing Gear
  5. Leather & Plastic Care
  6. Car Cleaning Supplies
  7. Chassis Paint, Coatings, Sealants, and Rust Conversion
Drivetrain
  1. Differential and Gearing Upgrades
  2. Differential Mounts and Upgrades
  3. OEM Clutch Kits & Clutch Parts
  4. Performance Clutch Kits & Parts
  5. Stock OEM Dual Mass Flywheels
  6. Clutch Parts
  7. UUC Short Shift Kits
  8. Axle Shafts
  9. Driveshafts
  10. Performance Short Shift Kits
  11. UUC DSSR - Double Sheer Selector Rod
  12. Drivershaft Center Support Bearings
  13. Flex Discs & Guibos
  14. Transmission Mounts
  15. Transmission Parts
Engine Chips
  1. Performance Flash Software, 2005+ Models
  2. Sprint Booster Drive-by-Wire Module
Engine Parts
  1. Engine Performance Packages
  2. Water Pumps
  3. Thermostats
  4. Radiators & Cooling System Overhaul Kits
  5. Oil Pan Baffles
  6. Radiator Hoses, Cooling Hoses, & Hose Sets
  7. Underdrive Power Pulleys
  8. Schrick Performance Camshafts
  9. External Engine Parts
  10. Drive Belts & V-Belts
  11. Gaskets, Gasket Sets, Seals, & O-Rings
  12. Crankcase Vent, PCV, and Oil Separator Systems
  13. Motor Mounts
  14. Electrical Sensors, Switches, & Relays
  15. Alternator & Alternator Parts
  16. Starter Motors & Starter Parts
  17. Fuel System Parts
  18. Internal Engine Parts
  19. Cylinder Head Parts & Head Bolts
  20. VANOS Units & Parts
  21. Rod Bearing Kits
  22. Oil Coolers & Oil Cooler Parts
Exhaust
  1. Supersprint Performance Exhaust Systems
  2. Performance Headers & Downpipes
  3. Turner Motorsport Performance Exhaust
  4. Akrapovic Performance Exhaust Systems
  5. Borla Performance Exhaust Systems
  6. Corsa Performance Exhaust Systems
  7. Dinan Free Flow Exhaust Systems
  8. Performance Exhaust Systems
  9. Exhaust System Upgrades
  10. Exhaust Muffler Tips
  11. Oxygen Sensor - O2 Sensors
  12. Exhaust Gaskets Hangers and Parts
Exterior / Body
  1. Black Grills
  2. Chrome Grills & Trim
  3. Emblems & Decals for Hood, Trunk, and Wheels
  4. Painted Reflectors
  5. Front Spoilers, Bumper Covers, & Air Dams
  6. Rear Spoilers, Rear Wings, & Aprons
  7. Body Trim Parts & Accessories
  8. Hood & Trunk Shocks, Struts
  9. License Plate Brackets & License Plate Frames
  10. Mirror Kits & Mirror Parts
  11. Window Regulators & Motors
  12. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  13. Hood Pins and AeroCatch Latches
  14. Racing Tow Hooks and Tow Straps
  15. Aero & Body Kits
Intake
  1. aFe Cold-Air Intake Kits
  2. Turbos & Active Autowerke Superchargers
  3. Dinan Cold Air Intake Kits
  4. Gruppe M Cold-Air Intake Kits
  5. aFe Performance Air Filters
  6. K&N Performance Air Filters
  7. Intake Cleaning & Recharging Kits
  8. Intake Manifold Components (DISA, Vacuum, CCV, Etc)
  9. BOV, Chargepipe, and Intercooler Upgrade Kits
  10. Throttle Body Parts
  11. Other Intake Kits
Interior
  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. Factory Steering Wheels
  7. Racing Steering Wheels
  8. Shift Knobs, Shift Boots, & Shift Handles
  9. Seats & Seat Accessories
  10. Seat Belts and Racing Harnesses
  11. Cup Holders and Storage
  12. Carbon Fiber Interior Parts
  13. Door Sill Strips
  14. Heating & Air Conditioning
  15. Interior Switches and Switchgear
  16. Sunshades & Windscreens
  17. Interior Trim & Accessories
Lighting
  1. Euro Clear Turn Signals, Parking Lights, & Tail Lights
  2. Turn Signals / Parking Lights
  3. Angel Eye Headlight Conversions
  4. Bulbs for Headlights, Turn Signals and Tail Lights
  5. Headlights, Headlight Lenses, & Headlight Parts
  6. Fog Lights, Fog Light Lenses, & Fog Light Parts
  7. Tail Lights
  8. Stealth Bulbs
Maintenance
  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Cabin Air Filters, Heppa Filters, & Microfilters
  5. Transmission Filter Kits & Transmission Service Parts
  6. Ignition Coils
  7. Spark Plugs
  8. Service Reset Tools & Fault Code Readers
  9. Anti-Freeze and Coolant
  10. Engine Oils - Genuine BMW and OEM
  11. Power Steering and Hydraulic Fluids
  12. Transmission and Gear Oil - Genuine BMW and OEM
  13. MOTUL Engine Oil and Gear Lubricants
  14. Red Line Oil & Fluids
  15. Liqui-Moly Oil and Additives
Suspension
  1. Shocks & Struts
  2. H&R Performance Springs
  3. Dinan Performance Springs
  4. Spring & Shock Packages
  5. Dinan Coilover Spring Kits
  6. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  7. H&R Coil Over Suspensions
  8. KW Coil Over Suspensions
  9. Moton Coil Overs & Race Shocks
  10. ST Suspension Coilover Kits
  11. Turner Motorsport Racing Suspension Kits
  12. TC Kline Racing Coil Overs
  13. Chassis Reinforcement Kits & Parts
  14. Sway Bar Kits
  15. Sway Bar Links & Sway Bar Parts
  16. Camber / Caster Kits
  17. Strut Braces & Stress Bars
  18. Control Arm Replacements & Upgrades
  19. Suspension Bushings & Mounts
  20. Wheel Bearings & Hub Assemblies
  21. Steering Racks & Power Steering Pumps
  22. Tie Rods & Steering Parts
  23. Coil Over Spring Hardware
  24. CATuned Coilover Kits
  25. Sachs Performance Coil Over Suspension
  26. AST Suspension
Wheels
  1. Apex Flow Formed Alloy Wheels
  2. Forgeline Custom Forged Alloy Wheels
  3. HRE FlowForm Performance Alloy Wheels
  4. Vorsteiner Wheels
  5. Rohana Wheels
  6. D Force Flow Formed Alloy Wheels
  7. Alpina Alloy Wheels
  8. Original BMW Wheels and Wheel Upgrades
  9. Turner Motorsport Wheel Spacers
  10. ECS Tuning Wheel Spacers
  11. H&R Wheel Spacers
  12. Wheel Bolts, Wheel Studs and Nuts
  13. Wheel Emblems, Caps, and Accessories
  14. High Performance Wheels
Tools
  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Clutch Alignment Tools
  5. Coil Over Wrenches
  6. Cooling System Tools
  7. Cylinder Head and VANOS Tools
  8. Exhaust Tools
  9. Fan and Fan Clutch Tools
  10. Fault Code Readers and OBD Scan Tools
  11. Fuel System Tools
  12. Genuine BMW Tool Kits
  13. Oil Service Tools
  14. Sockets
  15. Spark Plug Sockets
  16. Transmission and Differential Tools
  17. Wheel Pin Tools
  18. Workshop Chemicals
Clearance
Choose BMW
BMW 1 Series
  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+
BMW 2 Series
  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+
  3. (F87) M2 2016+
BMW 3 Series
  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+
  18. (F34) 3-Series Gran Turismo 2014+
BMW 4 Series
  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2015+
  3. (F34) 4-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+
  6. (F36) 4-Series Gran Coupe 2015+
BMW 5 Series
  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+
  10. (G30) 5-Series 2017+
BMW 6 Series
  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Coupe 2011+
  6. (F13) 6-Series Convertible 2011+
BMW 7 Series
  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+
BMW 8 Series BMW Classics (E9, Bavaria, Isetta, etc)
  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978
BMW X Series (SAV)
  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+
  12. (F48) X1 2016+
  13. (F48) X1 (2016+)
BMW Z Series
  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003
BMW 1600-2002 / tii BMW i Series
  1. (I01) BMW i3 2014+
  2. (I12) BMW i8 2014+
MINI Cooper and Cooper S
Racing
Racing Home Racing News Racing Schedule Racing Photo Gallery
Gallery
Photo Gallery Wallpaper Project Cars
  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone
Video Gallery
Projects
Turner BMW i8 Turner BMW F80 M3 Turner BMW F82 M4 Turner BMW X5 M Turner BMW F22 2 Series Turner BMW F13 M6 Turner BMW F10 M5 Turner BMW F30 335i Turner BMW E9X M3 Turner BMW E92 335i Turner BMW E82 1 Series Turner BMW ActiveE (100% Electric) Turner BMW E46 M3 Turner BMW E46 330i ZHP Turner BMW E36 M3 Turner BMW E30 M3 Turner MINI Cooper S McLaren F1 Turner BMW E92 M3 Lime Rock Turner BMW F80 M3 Silverstone
About Us
About Turner Motorsport Customer Feedback The Turner Team
  1. Open Positions
Returns Policy Shipping Info Contact Us Privacy Policy Security Policy FAQs

BMW E93 M3 Performance Flash Software, 2005+ Models

BMW E93 M3 Performance Flash Software, 2005+ Models The Fastest Way To More Power - Up To 120hp!!!

Our Performance Software makes more horsepower and torque with no downsides! Performance software is the icing on the cake, the finishing touch, or the capstone for your BMW tuning project. Software ties it all together - maximizing output from upgrades where the factory software can't keep up. The factory software is actually programmed around 87 octane which de-tunes the performance of the car. Our software is set to 91 as a mimimum, allowing us to be more aggressive with the programming. We can refine and adjust the factory limitations, opening up the potential for more horsepower or refinement from your current upgrades. We also tune the software to fix defects and rough edges in the stock software, making the car easier and more enjoyable to drive.

We have been tuning BMW software since 1995, making us one of the most experienced BMW tuners in North America. Over the years we have experimented and tested many different forms and brands of performance software, including developing our own on our Dynapack chassis dyno. Our Performance Software catalog includes tunes and upgrades that best suit your BMW and your upgrade goals.

Turner Motorsport Performance Flash Software features:
+ dyno developed, real-world tested
+ ignition and fuel timing adjustments
+ cam timing, including VANOS and Valvetronic
+ raised rev limit*
+ top speed de-limited*
+ part throttle and full throttle mapping
+ improved throttle response
+ specific software for most major upgrades - cold-air intakes, sport exhaust, etc
+ race software for removing catalytic converters**


* - on select models
** - not legal for street use, emissions liability waiver required
You're currently viewing parts for your (E93) M3 Convertible 2008-2013. Reset your chassis
For accurate results, specify your model below.
E9X M3 Turner Test Pipes and Software Bundle

CAT DELETE + RACE SOFTWARE PACKAGE
Max HP gain = 48 hp
Max Trq gain = 32 ft-lbs

For a performance upgrade on your E90/E92 M3 there is nothing better than the cat-delete with specialized software. This combination produces over 40whp and 30wft-lbs with no other modifications - a massive gain on an already impressive engine!

Our Race software has been fine-tuned over the years beginning with our IMSA/CTSCC E92 M3 racecars (2011 GS class champions). We modify over 40 different maps in the ECU for such things as fuel and timing maps at part throttle and full throttle, revised torque settings, knock control, VANOS and cam timing, pedal input, top speed limiter, and rev limiters. Additional tuning has been done for the cat delete - prevent limp mode and check engine lights, fault codes for cat delete, and turning off the secondary air pump (to satisfy race series regulations). Turning off the secondary air pump also disables the cold start sequence so your idle and warm-up will be smoother and quieter. A built-in cold start rev limiter safeguards the engine internals until the oil warms up. Not only is there a lot more power at all RPM but the engine is more responsive and smoother!

Our M3 Test Pipes were designed specifically for race/track use and offer a cost-effective means of removing the very restrictive primary cats. On our Turner M3 and BMW Motorsport M3 GT4 racecars the primary cats and restrictive piping is eliminated. Our M3 cat delete pipes were the first on the market and have proven again and again to make big power on their own or especially when paired with our Stage 2 performance software. Our Test Pipes are Made in the USA with strict production tolerances and quality control. We manufacture our pipes with high quality, mandrel-bent stainless steel pipes and laser-cut flanges for an optimum fitment. New gaskets are included. The factory secondary cats remain in place. Your original O2 sensors plug into the Turner Test Pipes.

Our software is installed via the Turner flashing OBD tool. This tool plugs into the OBD socket in the dash and the performance software is installed from a laptop computer connected to the tool. It also works as a fault code scanner to read and reset diagnostic trouble codes and reset adaptations. The software program requires a Windows XP/Vista/7/8/10 laptop and the installation and setup are very easy (click here for instructions). The OBD tool, cable, and files are shipped to you with simple setup instructions. There is no need to remove your ECU and ship it. You can have your M3 flashed in under an hour from the convenience of your garage or driveway!

Turner Race Software Options:

Minimum Octane

You can choose between 91 or 93. We have developed tuning for the standard 'high octane' premium fuel found around the country (91 is the maximum available in some areas). Our power and torque gains are advertised with 91. If using 93 we can alter the knock sensor logic to extract more power with the higher grade fuel. Additional race fuel maps are also available, contact us for details.

Rev Limit

On 6-speed manual cars we can set a higher engine rev limit. 8,300 is stock; 8,400 is what was used on the GTS model in Europe; 8,600 is the safest raised rev limit that we have used in our race cars. To make things simple we offer it as either stock 8,300 or raised to 8,600. On DCT cars the higher rev limits are for M shift modes only (manual/paddle shift). The higher revs do not work in full auto D modes. Work is continuing on higher limits for D mode.

Launch Control

Our software can also enable a Launch Control feature. To use it, activate M Dynamic Mode, engage first gear, hold the throttle to the floor (it will only rev to 3,500 RPM), and dump the clutch. Keep your foot to the floor and hang on! You don't have to modulate the clutch and throttle - the engine and DSC modules will handle the launch. We experimented with different launch points and found that 3,500 RPM offers a great combination of tire hook-up and torque output. This is available on manual transmission cars only (DCT has their own built-in launch control).

M Dynamic Mode Steering

We can set the M Dynamic Mode (MDM) steering effort as the standard steering. The MDM steering is heavier and requires more effort when driving at higher speeds. Some owners feel that the standard steering is too light and over-boosted and the MDM steering is a nice change. This does not affect the steering effort, or the other features, of MDM.

240E Update

Our performance and race software is built around a specific version of stock BMW software (version 240E). It was released towards the end of M3 production and includes a number of significant changes over older versions for drivability and torque managment. 240E was such a big step forward that it's considered an upgrade all on its own. No worry if you don't have 240E - we will provide you with a free update before the Turner performance software is installed.

In 2015 BMW released a 241E update. There are minor changes to the software code but the tuning maps and data are all the same as the 240E version so there is no need to update to 241E. If the dealer offers it we recommend that you decline. If you're already on 240E there is no reason to switch to 241E (the tuning maps are the same).

***This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.***


Click here for E92 M3 Test Pipe installation instructions.

This package fits the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible

Turner Motorsport
Part #: TMS224294
Price: $1239.06 (USD) 
$1398.95 (Sale - Save 11%)
Ships on Dec 21, 2017
Free Shipping Free Shipping
Turner Stage 2 Race Software for E9X M3


RACE SOFTWARE TO BE USED WITH FRONT CAT DELETE
Max HP gain = 17 hp
Max Trq gain = 19 ft-lbs
Rev Limit = up to 8600 RPM

Our Race software was co-developed along with our cat-delete Test Pipes and our IMSA E92 M3 racecars. Dyno-tuned and race-proven, this software will get the most from a cat delete upgrade on the E9X M3. The combination of the software and Test Pipes produces over 40whp and 30wft-lbs with no other modifications - a massive gain on an already impressive engine.

Our Race software has been fine-tuned over the years beginning with our IMSA/CTSCC E92 M3 racecars (2011 GS class champions). We modify over 40 different maps in the ECU for such things as fuel and timing maps at part throttle and full throttle, revised torque settings, knock control, VANOS and cam timing, pedal input, top speed limiter, and rev limiters. Additional tuning has been done for the cat delete - prevent limp mode and check engine lights, fault codes for cat delete, and turning off the secondary air pump. Turning off the secondary air pump also disables the cold start sequence so your idle and warm-up will be smoother and quieter. A built-in cold start rev limiter safeguards the engine internals until the oil warms up. Not only is there a lot more power at all RPM but the engine is more responsive and smoother!

The Race software is only for cars with the primary cats removed via Test Pipes or similar race exhaust. We developed this along with our own Test Pipes but the software can also be used with other brands of cat-delete pipes too. In addition to our own exhaust, we have used our software with the Akrapovic Evolution exhaust, Supersprint cat-delete and sport cats, aFe race center pipes, Borla Test Pipes, and others. If you have other modifications done to your M3, we can supply you with specially-developed software to maximize the gains from those upgrades. Click on the blue banners below to see more detailed information on the software options we offer. Select all those that apply in the menu below.

Turner Motorsport has been developing software on the S65 since our first car in 2008. Since then we have done software projects for street, track, full-race, stroker, and supercharged engine builds using the stock MSS60 DME or a stand-alone Bosch or Motec system. Engine tunes have been developed and checked on our Dynapack chassis dyno and further refined with real world testing. Our Race software is based on the tuning we did for the CTSCC racing series, which we won the championship in 2011. For track cars, our Stage 2 cat-delete software will clear check engine lights and faults related to cat and air pump delete (to satisfy race series regulations).

Our software is installed via the Turner flashing OBD tool. This tool plugs into the OBD socket in the dash and the performance software is installed from a laptop computer connected to the tool. It also works as a fault code scanner to read and reset diagnostic trouble codes and reset adaptations. The software program requires a Windows XP/Vista/7/8/10 laptop and the installation and setup are very easy (click here for instructions). The OBD tool, cable, and files are shipped to you with simple setup instructions. There is no need to remove your ECU and ship it. You can have your M3 flashed in under an hour from the convenience of your garage or driveway!

E9X M3 Stage 2 Power Gains:

SpecPower Gain (Engine)Torque Gain (Engine)

Software upgrade alone+17hp+19ft-lbs

Software and Test Pipes+48hp+33ft-lbs


Stage 2 Race Software Options:

Minimum Octane

(click to expand)

You can choose between 91 or 93. We have developed tuning for the standard 'high octane' premium fuel found around the country (91 is the maximum available in some areas). Our power and torque gains are advertised with 91. If using 93 we can alter the knock sensor logic to extract more power with the higher grade fuel. Additional race fuel maps are also available, contact us for details.

Rev Limit

(click to expand)

On 6-speed manual cars we can set a higher engine rev limit. 8,300 is stock; 8,400 is what was used on the GTS model in Europe; 8,600 is the safest raised rev limit that we have used in our race cars. To make things simple we offer it as either stock 8,300 or raised to 8,600. On DCT cars the higher rev limits are for M shift modes only (manual/paddle shift). The higher revs do not work in full auto D modes. Work is continuing on higher limits for D mode.

Launch Control

(click to expand)

Our software can also enable a Launch Control feature. To use it, activate M Dynamic Mode, engage first gear, hold the throttle to the floor (it will only rev to 3,500 RPM), and dump the clutch. Keep your foot to the floor and hang on! You don't have to modulate the clutch and throttle - the engine and DSC modules will handle the launch. We experimented with different launch points and found that 3,500 RPM offers a great combination of tire hook-up and torque output. This is available on manual transmission cars only (DCT has their own built-in launch control).

Disbale Cold Start

(click to expand)

This feature is for off-road/track driven cars only. Under the original setup, a secondary air pump will turn on when the engine is started. This is to add fresh air to mix with the rich fuel mixture and heat the catalytic converters faster (rich mixtures are bad for the cats). The air pump stops running when the engine gets to a specified temp and the fuel mixture leans out. Unfortunately, the air pump system raises the idle and produces a very harsh and loud tone to the exhaust. The sound is worse when the catalytic converters are removed (such as on a track or race car) because the exhaust is more open. We will disable the air pump system so it does not activate when the engine is started. You get a super smooth and quiet startup that is a night and day difference compared to the original. This feature should only be used on cars that have had cats removed because the rich fuel mixture at startup will degrade the catalytic converters much quicker.

M Dynamic Mode Steering

(click to expand)

We can set the M Dynamic Mode (MDM) steering effort as the standard steering. The MDM steering is heavier and requires more effort when driving at higher speeds. Some owners feel that the standard steering is too light and over-boosted and the MDM steering is a nice change. This does not affect the steering effort, or the other features, of MDM.

240E Update

(click to expand)

Our performance and race software is built around a specific version of stock BMW software (version 240E). It was released towards the end of M3 production and includes a number of significant changes over older versions for drivability and torque managment. 240E was such a big step forward that it's considered an upgrade all on its own. No worry if you don't have 240E - we will provide you with a free update before the Turner performance software is installed.

In 2015 BMW released a 241E update. There are minor changes to the software code but the tuning maps and data are all the same as the 240E version so there is no need to update to 241E. If the dealer offers it we recommend that you decline. If you're already on 240E there is no reason to switch to 241E (the tuning maps are the same).

 


Video:

 

 

click for high quality

 

This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.


This performance engine software (reflash) is for the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible

Turner Motorsport
Part #: TMS1979
Price: $899.10 (USD) 
$999 (Sale - Save 10%)
Ships on Dec 21, 2017
Turner Stage 1 Performance Software for E9X M3

INSTANT POWER GAIN WITH NO DOWNSIDE!
Max HP gain = 17 hp
Max Trq gain = 19 ft-lbs
Rev Limit = up to 8,600 RPM

Adding power and torque to your M3's V8 is as easy as a flash! Where we can make our software better is by tuning it for higher octane gasoline. The stock software is tuned around the 87 octane available in the US (not that most people would use 87 but BMW engineers must account for that possibility). With our software, the performance of the S65 engine is optimized for the higher 91 or 93 octane. We tune many areas of the engine programming - fuel and timing maps at part throttle and wide-open throttle, revised torque settings and knock control, VAN0S variable valve timing, and more. The throttle response is also improved (quicker and smoother) eliminating unwanted and dangerous flat spots in the factory pedal response. We also offer raised rev limits and the top speed is raised/eliminated. Our software uses the factory 240E update as a base. The 240E has several major enhancements over previous factory file versions. No worry if you don't have 240E - we will provide you with a free update before the Turner performance software is installed. If you have other modifications done to your M3, we can supply you with specially-developed software to maximize the gains from those upgrades.

Turner Motorsport has been developing software on the S65 since our first car in 2008. Since then we have done software projects for street, track, full-race, stroker, and supercharged engine builds using the stock MSS60 DME or a stand-alone Bosch or Motec system. Engine tunes have been developed and checked on our Dynapack chassis dyno and further refined with real world testing. For track cars, our Stage 2 cat-delete software will clear check engine lights and faults (to satisfy race series regulations).

Our software is installed via the Turner flashing OBD tool. This tool plugs into the OBD socket in the dash and the performance software is installed from a laptop computer connected to the tool. It also works as a fault code scanner to read and reset diagnostic trouble codes and reset adaptations. The software program requires a Windows XP/Vista/7/8/10 laptop and the installation and setup are very easy (click here for instructions). The OBD tool, cable, and files are shipped to you with simple setup instructions. There is no need to remove your ECU and ship it. You can have your M3 flashed in under an hour from the convenience of your garage or driveway!


Stage 1 Performance Software Options:

Minimum Octane

(click to expand)

You can choose between 91 or 93. We have developed tuning for the standard 'high octane' premium fuel found around the country (91 is the maximum available in some areas). Our power and torque gains are advertised with 91. If using 93 we can alter the knock sensor logic to extract more power with the higher grade fuel. Additional race fuel maps are also available, contact us for details.

Rev Limit

(click to expand)

On 6-speed manual cars we can set a higher engine rev limit. 8,300 is stock; 8,400 is what was used on the GTS model in Europe; 8,600 is the safest raised rev limit that we have used in our race cars. To make things simple we offer it as either stock 8,300 or raised to 8,600. On DCT cars the higher rev limits are for M shift modes only (manual/paddle shift). The higher revs do not work in full auto D modes. Work is continuing on higher limits for D mode.

Launch Control

(click to expand)

Our software can also enable a Launch Control feature. To use it, activate M Dynamic Mode, engage first gear, hold the throttle to the floor (it will only rev to 3,500 RPM), and dump the clutch. Keep your foot to the floor and hang on! You don't have to modulate the clutch and throttle - the engine and DSC modules will handle the launch. We experimented with different launch points and found that 3,500 RPM offers a great combination of tire hook-up and torque output. This is available on manual transmission cars only (DCT has their own built-in launch control).

M Dynamic Mode Steering

(click to expand)

We can set the M Dynamic Mode (MDM) steering effort as the standard steering. The MDM steering is heavier and requires more effort when driving at higher speeds. Some owners feel that the standard steering is too light and over-boosted and the MDM steering is a nice change. This does not affect the steering effort, or the other features, of MDM.

240E Update

(click to expand)

Our performance and race software is built around a specific version of stock BMW software (version 240E). It was released towards the end of M3 production and includes a number of significant changes over older versions for drivability and torque managment. 240E was such a big step forward that it's considered an upgrade all on its own. No worry if you don't have 240E - we will provide you with a free update before the Turner performance software is installed.

In 2015 BMW released a 241E update. There are minor changes to the software code but the tuning maps and data are all the same as the 240E version so there is no need to update to 241E. If the dealer offers it we recommend that you decline. If you're already on 240E there is no reason to switch to 241E (the tuning maps are the same).

 


This item fits the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible

 

Turner Motorsport
Part #: TMS1974
Price: $719.10 (USD) 
$799 (Sale - Save 10%)
Ships on Dec 21, 2017
Get notified about money saving
specials & deals for your BMW
enter your email address
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook




    • 1-800-280-6966
      Mon-Thur 9am-6pm ET, Fri 9am-5pm ET

      • © TurnerMotorsport.com 1993-2017. All Rights Reserved.