BMW Seat Belts and Racing Harnesses for BMW E93 M3 S65 4.0L

Clear BMW chassis
The advantage of racing harnesses cannot be understated. Aside from the obvious improvement to your safety, harnesses keep your body planted in the seat and allow a much more confident and focused driving experience. Without your body strapped in you're constantly fighting to keep youself planted in the seat and these forces distract you from controlling the car. It also prevents you from getting and maintaining the ideal leverage point for working the steering wheel and pedals. Turner Motorsports offers several harness and seat belt accessories to make the use of harness belts easier.

Racing Seat Belt Harness Retaining Guide Collars (Pair)
Racing Seat Belt Harness Retaining Guide Collars (Pair)
These little guys are one of our favorite final touches o...
Turner Motorsport - Corporate Logo
T#:339005
Part#: TIN9903150
In Stock
Starting at $79.90
Free Shipping on orders $99 and up
These little guys are one of our favorite final touches on a race car build. After years of requests, we now are able to supply these for more than just our race team's use. These aluminum collars bolt on your roll cage's harness bar (or any bar for that matter) and help keep your seat belt harnesses from sliding on the bar. You can use just one pair to accomplish this, or 2 pairs (4 collars total) for the best looking and functioning install. The beauty of these collars (besides being lightweight and looking clean) is that they can be adjusted from side to side, which is convenient if you change you seat or belt configuration. They can also be used for other applications as well, such as taming that helmet net strap. If you're looking for a clean, professional looking solution, these are a superb final touch. As used on our own Championship winning TMS E46 and E90 race cars.

We offer these guide collars in two sizes: for 1.5" OD roll bar tubing or for 1.75" OD roll bar tubing (choose your size below). Check your cage tubing diameter especially if your car was built in Europe as they used metric tubing sizes. If you need a metric size, contact us. Also measure with paint applied, not bare tubing. These are sold by the pair, so be sure to modifying your quantity below (or in the cart) if you need them for both seats.
BMW Motorsport Seat Belt Shoulder Pad Set
BMW Motorsport Seat Belt Shoulder Pad Set
These original BMW Motorsport shoulder pads fit over any ...
Genuine BMW - Corporate Logo
T#:340352
Part#: MSBELT50MM
In Stock
Sale - Save 26% $99.95
Starting at $73.59
Free Shipping
Sale - Save 26% $99.95
Starting at $73.59
Free Shipping
These original BMW Motorsport shoulder pads fit over any street car seat belt or 2" harness belt. A zippered side makes these super easy to install on any car. High quality "BMW MOTORSPORT" embroidery will set your car apart from the rest. Also available in 76mm (3") harness width. Set includes two shoulder pads.
Schroth Adjusting Grips - 2"
Schroth Adjusting Grips - 2"
Schroth harness grips slide into the ends of your Schroth...
Schroth - Corporate Logo
T#:390773
Part#: SR00092
In Stock
$15.95
$15.95
Schroth harness grips slide into the ends of your Schroth harnesses and give your fingers something to lock onto when tightening the harness. Otherwise, your hand - or glove - has to yank on the end of the strap which might be slippery. Schroth Grips make life easier and pit stops quicker! An accessory that you really can't live without. Sold per harness for both shoulder and both lap belts (4 Grips total). Fits Schroth 2" harnesses only.

Schroth Racing 2 Inch Harness Pads
Schroth Racing 2 Inch Harness Pads
Cushioned pads that cover the 2" shoulder belts ...
Schroth - Corporate Logo
T#:390796
Part#: SR-2IN-PADS
In Stock
Starting at $31.95
Starting at $31.95
Cushioned pads that cover the 2" shoulder belts so they don't dig into your shoulders. These pads simply cover the belts and fasten with a zipper. Available in multiple colors with a "Schroth Racing" patch sewn on (flip the pad over if you don't want the logo showing). These can even be used on stock 3-point seatbelts to prevent the belt from rubbing against your neck. Sold as a pair of pads (enough to fit one racing harness).

RaceQuip 5 Point Latch And Link 3" Racing Harness - SFI 16.1 Approved
RaceQuip 5 Point Latch And Link 3" Racing Harness - SFI 16.1 Ap...
Racing harnesses are required at any respectable track or...
Racequip - Corporate Logo
T#:403220
Part#: 7110XX5PT
In Stock
Starting at $69.95
Starting at $69.95

Racing harnesses are required at any respectable track or strip, but they tend to run upwards of hundreds of dollars. RaceQuip designs and builds safety equipment for just this issue! Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

This Standard 5 Point Latch and Link Racing harness is RaceQuips most popular racing harness, priced at $74.99 or below while still being fully SFI 16.1 Approved.

All harness systems are constructed using drop-forged steel hardware for ultimate strength and reduced weight. All hardware is cadmium plated for added protection. They use only 3" premium polyester webbing and all belts are box-x pattern sewn to ensure uniform stitch length and strength. Belts and hardware are routinely tested to verify compliance with SFI 16.1 standards.

All of their harness sets feature a latch & link system to retain the belts. The latch & link system is distinguished by a pivoting "hammer," called a Duckbill, which locks all of the belts into place by snapping down into a detent. Both shoulder belts and the sub belt are hooked over the link; the link is inserted into the latch; the Duckbill is then brought down into and over the link, securely holding all of the pieces in place.

RaceQuip Latch & Link Harness Systems come as a "pull down" design. This means that the lap belts must be pulled down and away from the center latch mechanism to tighten. Since their belts are "double adjustable", lengths are easily adjusted on either end for ease of installation. Using the included three bar slide you can mount the belts by either wrapping them around a rollbar or by bolting them in place. Snap-in ends and eyebolts are sold separately if you want to install your belts in that manner.

Features and Specifications:

  • Exceeds SFI 16.1 Rating (SFI Tags Affixed)
  • NOT D.O.T. / FMVSS Certified for On Highway Use
  • Premium 3" Polyester Webbing
  • Twin Individual Shoulder Belts
  • Pull Down Style Lap Belt
  • 5 Point Design - Single 2" Crotch Sub Strap
  • 3" Hardware Ends Installed
  • Double Adjustable for Ease of Installation
  • Wrap Around or Bolt-in Mounting
  • Drop-Forged Steel Hardware (no bolts)
  • Shoulders Adjust from 20" to 62"
  • Lap Belt Adjusts 20" to 60"
  • Available in Black, Red, Blue, Yellow, Orange, Purple, Platinum, Green and Pink
  • Can Be Re-webbed (SFI) Upon Expiration
Sabelt Eye-Bolt Back Plate
Sabelt Eye-Bolt Back Plate
Eye-Bolt Back Plate 65 mm X 65 mm X 3 mm 7/16" U...
Sabelt - Corporate Logo
T#:559179
Part#: CCMI0016
Direct Ship
New Item
$6.00
$6.00

Eye-Bolt Back Plate 65 mm X 65 mm X 3 mm 7/16" UNF Thread Welded Nut, 40 mm


Westfield Eyebolt
Westfield Eyebolt
Length - 50 mm. Long7/16"Grade 8.8Sold Individua...
Sabelt - Corporate Logo
T#:559196
Part#: CCMI0017
Direct Ship
New Item
$7.50
$7.50

Length - 50 mm. Long

7/16"

Grade 8.8

Sold Individually

Standard Eye-Bolt
Standard Eye-Bolt
Diameter - 7/16" UNF Thread Length - 23 mm, Tot...
Sabelt - Corporate Logo
T#:559195
Part#: 407005
Direct Ship
New Item
$7.00
$7.00

Diameter - 7/16" UNF

Thread Length - 23 mm,

Total length - 25 mm

Grade 8.8

Sold Individually


Sabelt FIA Approved 4-Point Saloon Racing Harness
Sabelt FIA Approved 4-Point Saloon Racing Harness
Sabelt is a global leader in development and manufacture ...
Sabelt - Corporate Logo
T#:552669
Part#: SAFIACCS4
Direct Ship
Starting at $260.00
Starting at $260.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Sabelt FIA approved racing harnesses are designed in a variety of configurations to suit your exact need and vehicle. Found in some of the fastest competition vehicles in the world, you can rest assured that you're being held securely by some of the finest belts available. Made by hand in Italy, quality and consistency are second to none. Whether you choose a four or six point, with aluminum or steel hardware each belt is designed to hold up to the rigors of the racetrack and to perform flawlessly in the event of a collision.

Features:

  • Shoulder straps: full 3aEURtmaEURtm width - steel adjuster
  • Shoulder fixing: snap hook - tribar
  • Lap belts: full 3aEURtmaEURtm width aEUR" steel adjuster Pull Up - snap hook fixing
  • Buckle fixed to lap belt

Sabelt FIA Approved 6-Point GT Saloon Racing Harness
Sabelt FIA Approved 6-Point GT Saloon Racing Harness
Sabelt is a global leader in development and manufacture ...
Sabelt - Corporate Logo
T#:552645
Part#: SAFIACCA1
Direct Ship
Starting at $495.00
Starting at $495.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Sabelt FIA approved racing harnesses are designed in a variety of configurations to suit your exact need and vehicle. Found in some of the fastest competition vehicles in the world, you can rest assured that you're being held securely by some of the finest belts available. Made by hand in Italy, quality and consistency are second to none. Whether you choose a four or six point, with aluminum or steel hardware each belt is designed to hold up to the rigors of the racetrack and to perform flawlessly in the event of a collision.

Features:

  • Shoulder straps: full 2aEURtmaEURtm width - aluminum lightweight adjuster
  • Shoulder fixing: snap hook - tribar
  • Lap belts: full 2aEURtmaEURtm width - lightweight carabinas
  • Lap belts: 2aEURtmaEURtm quick adjuster integrated to buckle tongue - Pull Down. Designed for GT/ Endurance
  • New compact buckle designed with crotches slots integrated to main body
  • Crotch straps: 2aEURtmaEURtm width - snap hook / tribar fixing
  • Yellow loops
  • Velcros on shoulders
  • Intercom wire fixing
Sabelt FIA Approved 6-Point Saloon Rally Racing Harness
Sabelt FIA Approved 6-Point Saloon Rally Racing Harness
Sabelt is a global leader in development and manufacture ...
Sabelt - Corporate Logo
T#:552658
Part#: SAFIACCA3
Direct Ship
Starting at $460.00
Starting at $460.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Sabelt FIA approved racing harnesses are designed in a variety of configurations to suit your exact need and vehicle. Found in some of the fastest competition vehicles in the world, you can rest assured that you're being held securely by some of the finest belts available. Made by hand in Italy, quality and consistency are second to none. Whether you choose a four or six point, with aluminum or steel hardware each belt is designed to hold up to the rigors of the racetrack and to perform flawlessly in the event of a collision.

Features:

  • Shoulder straps: full 3aEURtmaEURtm width - aluminum lightweight adjuster
  • Shoulder fixing: snap hook - tribar
  • Lap belts: full 3aEURtmaEURtm width - aluminum lightweight adjuster Pull Up-snap hook fixing
  • New compact buckle designed with crotches slots integrated to main body
  • Crotch straps: 2aEURtmaEURtm width - snap hook / tribar fixing
Sabelt ECE Approved 4-Point Clubman Belt
Sabelt ECE Approved 4-Point Clubman Belt
Sabelt is a global leader in development and manufacture ...
Sabelt - Corporate Logo
T#:552830
Part#: SACB1
Direct Ship
Starting at $145.00
Starting at $145.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Features:

  • 4 fixing points
  • Shoulder straps: 2" with steel adjusters
  • Lap belts: 2" with steel adjusters and clubman style buckle
  • Shoulder pads included


RaceQuip 5 Point Latch And Link HANS/HNR Racing Harness - SFI 16.1 Approved
RaceQuip 5 Point Latch And Link HANS/HNR Racing Harness - SFI 16.1 A...
Racing harnesses are required at any respectable track or...
Racequip - Corporate Logo
T#:403240
Part#: RQ5PTHANSHNR
Direct Ship
Starting at $89.95
Starting at $89.95

Racing harnesses are required at any respectable track or strip, but they tend to run upwards of hundreds of dollars. RaceQuip designs and builds safety equipment for just this issue! Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

The HANS/HNR harness set has narrow shoulder belts to better fit a head & neck restraint (HNR) like a HANS device.

All harness systems are constructed using drop-forged steel hardware for ultimate strength and reduced weight. All hardware is cadmium plated for added protection. They use only 3" premium polyester webbing and all belts are box-x pattern sewn to ensure uniform stitch length and strength. Belts and hardware are routinely tested to verify compliance with SFI 16.1 standards.

All of their harness sets feature a latch & link system to retain the belts. The latch & link system is distinguished by a pivoting "hammer," called a Duckbill, which locks all of the belts into place by snapping down into a detent. Both shoulder belts and the sub belt are hooked over the link; the link is inserted into the latch; the Duckbill is then brought down into and over the link, securely holding all of the pieces in place.

RaceQuip Latch & Link Harness Systems come as a "pull down" design. This means that the lap belts must be pulled down and away from the center latch mechanism to tighten. Since their belts are "double adjustable", lengths are easily adjusted on either end for ease of installation. Using the included three bar slide you can mount the belts by either wrapping them around a rollbar or by bolting them in place. Snap-in ends and eyebolts are sold separately if you want to install your belts in that manner.

Features and Specifications:

  • Exceeds SFI 16.1 Rating (SFI Tags Affixed)
  • NOT D.O.T. / FMVSS Certified for On Highway Use
  • Premium 3" Polyester Webbing
  • Twin Individual Shoulder Belts
  • 2" Shoulder Accomodates HNR / HANS Device
  • Pull Down Style Lap Belt
  • 5 Point Design - Single 2" Crotch Sub Strap
  • Hardware Ends Installed
  • Double Adjustable for Ease of Installation
  • Wrap Around or Bolt-in Mounting
  • Drop-Forged Steel Hardware (no bolts)
  • Shoulders Adjust from 20" to 62"
  • Lap Belt Adjusts 20" to 60"
  • Available in Black, Red, and Blue
  • Can Be Re-webbed (SFI) Upon Expiration
RaceQuip 5 to 6 Point Latch And Link Harness Conversion - SFI 16.1 Approved
RaceQuip 5 to 6 Point Latch And Link Harness Conversion - SFI 16.1 A...
Racing harnesses are required at any respectable track or...
Racequip - Corporate Logo
T#:403247
Part#: RQ6PTCON
Direct Ship
Starting at $19.95
Starting at $19.95

Racing harnesses are required at any respectable track or strip, but they tend to run upwards of hundreds of dollars. RaceQuip designs and builds safety equipment for just this issue! Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

RaceQuip now offers a conversion kit for those who are looking to upgrade their RaceQuip 5 point harness to a 6 point set. Designed for use with all RaceQuip latch & link harness sets, this conversion uses a "mustache bar" to separate and move the crotch straps outward. The kit includes hardware (no bolts) to allow the belts to be mounted as a wrap around or as a bolt-in. Available in black, red and blue.

All harness systems are constructed using drop-forged steel hardware for ultimate strength and reduced weight. All hardware is cadmium plated for added protection.

Features and Specifications:

  • Exceeds SFI 16.1 Rating (SFI Tags Affixed)
  • NOT D.O.T. / FMVSS Certified for On Highway Use
  • Wrap Around or Bolt-in Mounting
  • Drop-Forged Steel Hardware (no bolts)
  • Available in Black, Red, Blue
  • Can Be Re-webbed (SFI) Upon Expiration
Standard Eyebolt
Standard Eyebolt
Thread Length - 32 mm 7/16" UNFGrade 8.8Sold Ind...
Sabelt - Corporate Logo
T#:559197
Part#: CCMI0018
Direct Ship
New Item
$5.00
$5.00

Thread Length - 32 mm

7/16" UNF

Grade 8.8

Sold Individually


Sabelt FIA Approved 6-Point Formula Style Racing Harness
Sabelt FIA Approved 6-Point Formula Style Racing Harness
Sabelt is a global leader in development and manufacture ...
Sabelt - Corporate Logo
T#:552659
Part#: SAFIACCA4
Direct Ship
Starting at $395.00
Starting at $395.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Sabelt FIA approved racing harnesses are designed in a variety of configurations to suit your exact need and vehicle. Found in some of the fastest competition vehicles in the world, you can rest assured that you're being held securely by some of the finest belts available. Made by hand in Italy, quality and consistency are second to none. Whether you choose a four or six point, with aluminum or steel hardware each belt is designed to hold up to the rigors of the racetrack and to perform flawlessly in the event of a collision.

Features:

  • Shoulder straps: full 2aEURtmaEURtm width - aluminum lightweight adjuster
  • Shoulder fixing: plate - tribar
  • Lap belts: full 2aEURtmaEURtm width aEUR" steel/aluminum adjuster Pull Up - plate fixing
  • New compact buckle
  • Crotch straps: aEURoeformulaaEUR type 2aEURtmaEURtm width - plate / tribar fixing

Sabelt ECE Approved 4-Point Clubman Belt
Sabelt ECE Approved 4-Point Clubman Belt
Sabelt is a global leader in development and manufacture ...
Sabelt - Corporate Logo
T#:552832
Part#: SACB2
Direct Ship
Starting at $163.00
Starting at $163.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Features:

  • 4 fixing points
  • Shoulder straps: 2" with steel adjusters
  • Lap belts: 2" with steel adjusters and clubman style buckle
  • Shoulder pads included