click to Chat Live
Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart
Home
Categories
Specials Gifts & Clothing
  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages
Brakes
  1. Brake Overhaul Packages
  2. Brake Pads
  3. Brake Pad Sensors
  4. Brake Rotors
  5. StopTech Big Brake Kits
  6. Brembo Big Brake Kits
  7. Stainless Steel Brake Lines
  8. Brake Fluid
  9. Brake Calipers
  10. Caliper Rebuild Kits
  11. Parking Brake Parts
  12. Brake Master Cylinders
  13. ABS/DSC System Parts
  14. Brake Cooling Ducts & Backing Plates
  15. Brake Pads - Brembo GT BBK Calipers
  16. Brake Pads - StopTech BBK Calipers
Car Care & Accessories
  1. Car Covers
  2. Wheel & Tire Cleaning
  3. Wax, Polish and Cleaning Supplies
  4. Detailing Gear
  5. Leather & Plastic Care
  6. Car Cleaning Supplies
  7. Chassis Paint, Coatings, Sealants, and Rust Conversion
Drivetrain
  1. Differential and Gearing Upgrades
  2. Differential Mounts and Upgrades
  3. OEM Clutch Kits & Clutch Parts
  4. Performance Clutch Kits & Parts
  5. Lightweight Aluminum Flywheel Upgrades
  6. Stock OEM Dual Mass Flywheels
  7. Clutch Parts
  8. UUC Short Shift Kits
  9. Axle Shafts
  10. Driveshafts
  11. B&M Short Shifters
  12. Performance Short Shift Kits
  13. UUC DSSR - Double Sheer Selector Rod
  14. Flex Discs & Guibos
  15. Transmission Mounts
  16. Transmission Parts
Engine Chips
  1. Performance Flash Software, 2005+ Models
  2. Sprint Booster Drive-by-Wire Module
Engine Parts
  1. Engine Performance Packages
  2. Cam Sprockets & Gears
  3. Water Pumps
  4. Thermostats
  5. Radiators & Cooling System Overhaul Kits
  6. Oil Pan Baffles
  7. Radiator Hoses, Cooling Hoses, & Hose Sets
  8. Engine Fans & Fan Clutches
  9. Underdrive Power Pulleys
  10. Schrick Performance Camshafts
  11. External Engine Parts
  12. Drive Belts & V-Belts
  13. Gaskets, Gasket Sets, Seals, & O-Rings
  14. Factory-Spec Replacement Turbos and Kits
  15. Crankcase Vent, PCV, and Oil Separator Systems
  16. Turbo Upgrades and Kits
  17. Motor Mounts
  18. Electrical Sensors, Switches, & Relays
  19. Ignition Parts
  20. Alternator & Alternator Parts
  21. Starter Motors & Starter Parts
  22. Fuel System Parts
  23. Internal Engine Parts
  24. Cylinder Head Parts & Head Bolts
  25. VANOS Units & Parts
  26. Rod Bearing Kits
  27. Oil Coolers & Oil Cooler Parts
Exhaust
  1. Supersprint Performance Exhaust Systems
  2. Performance Headers & Downpipes
  3. Turner Motorsport Performance Exhaust
  4. Akrapovic Performance Exhaust Systems
  5. Borla Performance Exhaust Systems
  6. Corsa Performance Exhaust Systems
  7. Dinan Free Flow Exhaust Systems
  8. Performance Exhaust Systems
  9. Exhaust System Upgrades
  10. Exhaust Muffler Tips
  11. Oxygen Sensor - O2 Sensors
  12. Exhaust Gaskets Hangers and Parts
Exterior / Body
  1. Black Grills
  2. Chrome Grills & Trim
  3. Emblems & Decals for Hood, Trunk, and Wheels
  4. Painted Reflectors
  5. Front Spoilers, Bumper Covers, & Air Dams
  6. Rear Spoilers, Rear Wings, & Aprons
  7. Body Trim Parts & Accessories
  8. Hood & Trunk Shocks, Struts
  9. License Plate Brackets & License Plate Frames
  10. Mirror Kits & Mirror Parts
  11. Window Regulators & Motors
  12. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  13. Hood Pins and AeroCatch Latches
  14. Racing Tow Hooks and Tow Straps
  15. Aero & Body Kits
Intake
  1. aFe Cold-Air Intake Kits
  2. Turbos & Active Autowerke Superchargers
  3. Dinan Cold Air Intake Kits
  4. Gruppe M Cold-Air Intake Kits
  5. Performance Intake Kits
  6. aFe Performance Air Filters
  7. K&N Performance Air Filters
  8. Intake Cleaning & Recharging Kits
  9. Intake Manifold Upgrades
  10. Intake Manifold Components (DISA, Vacuum, CCV, Etc)
  11. BOV, Chargepipe, and Intercooler Upgrade Kits
  12. Mass Air Sensor & Air Flow Meters
  13. Throttle Body Parts
Interior
  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. Factory Steering Wheels
  7. Racing Steering Wheels
  8. Shift Knobs, Shift Boots, & Shift Handles
  9. Seats & Seat Accessories
  10. Seat Belts and Racing Harnesses
  11. Cup Holders and Storage
  12. Carbon Fiber Interior Parts
  13. Door Sill Strips
  14. Heating & Air Conditioning
  15. Interior Switches and Switchgear
  16. Sunshades & Windscreens
  17. Interior Trim & Accessories
Lighting
  1. Euro Clear Turn Signals, Parking Lights, & Tail Lights
  2. Turn Signals / Parking Lights
  3. Angel Eye Headlight Conversions
  4. Bulbs for Headlights, Turn Signals and Tail Lights
  5. Headlights, Headlight Lenses, & Headlight Parts
  6. Fog Lights, Fog Light Lenses, & Fog Light Parts
  7. Stealth Bulbs
Maintenance
  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Fuel Filters
  5. Cabin Air Filters, Heppa Filters, & Microfilters
  6. Transmission Filter Kits & Transmission Service Parts
  7. Ignition Coils
  8. Spark Plugs
  9. Bentley Repair / Service Manuals
  10. Service Reset Tools & Fault Code Readers
  11. Anti-Freeze and Coolant
  12. Engine Oils - Genuine BMW and OEM
  13. Power Steering and Hydraulic Fluids
  14. Transmission and Gear Oil - Genuine BMW and OEM
  15. MOTUL Engine Oil and Gear Lubricants
  16. Red Line Oil & Fluids
  17. Liqui-Moly Oil and Additives
Suspension
  1. Shocks & Struts
  2. H&R Performance Springs
  3. Dinan Performance Springs
  4. Spring & Shock Packages
  5. Dinan Coilover Spring Kits
  6. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  7. H&R Coil Over Suspensions
  8. KW Coil Over Suspensions
  9. ST Suspension Coilover Kits
  10. Turner Motorsport Racing Suspension Kits
  11. Chassis Reinforcement Kits & Parts
  12. Sway Bar Kits
  13. Sway Bar Links & Sway Bar Parts
  14. Camber / Caster Kits
  15. Strut Braces & Stress Bars
  16. Control Arm Replacements & Upgrades
  17. Suspension Bushings & Mounts
  18. Wheel Bearings & Hub Assemblies
  19. Steering Racks & Power Steering Pumps
  20. Tie Rods & Steering Parts
  21. Coil Over Spring Hardware
Wheels
  1. Apex Flow Formed Alloy Wheels
  2. Forgeline Custom Forged Alloy Wheels
  3. HRE FlowForm Performance Alloy Wheels
  4. Vorsteiner Wheels
  5. Rohana Wheels
  6. D Force Flow Formed Alloy Wheels
  7. Original BMW Wheels and Wheel Upgrades
  8. Turner Motorsport Wheel Spacers
  9. ECS Tuning Wheel Spacers
  10. H&R Wheel Spacers
  11. Wheel Bolts, Wheel Studs and Nuts
  12. Wheel Emblems, Caps, and Accessories
  13. High Performance Wheels
Tools
  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Clutch Alignment Tools
  5. Coil Over Wrenches
  6. Cylinder Head and VANOS Tools
  7. Fan and Fan Clutch Tools
  8. Fault Code Readers and OBD Scan Tools
  9. Fuel System Tools
  10. Genuine BMW Tool Kits
  11. Oil Service Tools
  12. Sockets
  13. Spark Plug Sockets
  14. Transmission and Differential Tools
  15. Wheel Pin Tools
  16. Workshop Chemicals
Clearance
Choose BMW
BMW 1 Series
  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+
BMW 2 Series
  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+
  3. (F87) M2 2016+
BMW 3 Series
  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+
  18. (F34) 3-Series Gran Turismo 2014+
BMW 4 Series
  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2015+
  3. (F34) 4-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+
  6. (F36) 4-Series Gran Coupe 2015+
BMW 5 Series
  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+
  10. (G30) 5-Series 2017+
BMW 6 Series
  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Coupe 2011+
  6. (F13) 6-Series Convertible 2011+
BMW 7 Series
  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+
BMW 8 Series BMW Classics (E9, Bavaria, Isetta, etc)
  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978
BMW X Series (SAV)
  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+
  12. (F48) X1 2016+
  13. (F48) X1 (2016+)
BMW Z Series
  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003
BMW 1600-2002 / tii BMW i Series
  1. (I01) BMW i3 2014+
  2. (I12) BMW i8 2014+
MINI Cooper and Cooper S
Racing
Racing Home Racing News Racing Schedule Racing Photo Gallery
Gallery
Photo Gallery Wallpaper Project Cars
  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone
Video Gallery
Projects
Turner BMW i8 Turner BMW F80 M3 Turner BMW F82 M4 Turner BMW X5 M Turner BMW F22 2 Series Turner BMW F13 M6 Turner BMW F10 M5 Turner BMW F30 335i Turner BMW E9X M3 Turner BMW E92 335i Turner BMW E82 1 Series Turner BMW ActiveE (100% Electric) Turner BMW E46 M3 Turner BMW E46 330i ZHP Turner BMW E36 M3 Turner BMW E30 M3 Turner MINI Cooper S McLaren F1 Turner BMW E92 M3 Lime Rock Turner BMW F80 M3 Silverstone
About Us
About Turner Motorsport Customer Feedback The Turner Team
  1. Open Positions
Returns Policy Shipping Info Contact Us Privacy Policy Security Policy FAQs

BMW E93 Performance Flash Software, 2005+ Models

BMW E93 Performance Flash Software, 2005+ Models The Fastest Way To More Power - Up To 120hp!!!

Our Performance Software makes more horsepower and torque with no downsides! Performance software is the icing on the cake, the finishing touch, or the capstone for your BMW tuning project. Software ties it all together - maximizing output from upgrades where the factory software can't keep up. The factory software is actually programmed around 87 octane which de-tunes the performance of the car. Our software is set to 91 as a mimimum, allowing us to be more aggressive with the programming. We can refine and adjust the factory limitations, opening up the potential for more horsepower or refinement from your current upgrades. We also tune the software to fix defects and rough edges in the stock software, making the car easier and more enjoyable to drive.

We have been tuning BMW software since 1995, making us one of the most experienced BMW tuners in North America. Over the years we have experimented and tested many different forms and brands of performance software, including developing our own on our Dynapack chassis dyno. Our Performance Software catalog includes tunes and upgrades that best suit your BMW and your upgrade goals.

Turner Motorsport Performance Flash Software features:
+ dyno developed, real-world tested
+ ignition and fuel timing adjustments
+ cam timing, including VANOS and Valvetronic
+ raised rev limit*
+ top speed de-limited*
+ part throttle and full throttle mapping
+ improved throttle response
+ specific software for most major upgrades - cold-air intakes, sport exhaust, etc
+ race software for removing catalytic converters**


* - on select models
** - not legal for street use, emissions liability waiver required
You're currently viewing parts for your (E93) 3-Series Convertible 2007-2013. Reset your chassis
For accurate results, specify your model below.
BMW Performance Power Kit - E9x 335i, 335xi, E82 135i with N55 engine Looking for more power from your N55 equipped 335i or 135i? This BMW Performance Software Upgrade provides a 20hp gain while retaining the factory warranty. With sporty performance, outstanding driving dynamics and innovative technology, the Power Kit maintains all of BMW's key attributes but allows you to put a personal touch on your BMW. The Performance-Optimized Engine Software provided by the Power Kit increases torque to 332 lb-ft (automatic transmissions) or 317 lb-ft (manual transmissions) available from just 1,500 rpm. Power output is increased by 20 horsepower, from 300hp to 320hp. This results in faster acceleration from 0 to 60 mph (0.2 seconds faster than the standard model) and from 50 mph to 75 mph (0.5 seconds faster than the standard model). Even with this increased power, the fuel consumption and emissions ratings remain the same as they were with the standard model. The Power Kit also adds a very sporty exhaust burbling noise during engine overrun conditions. BMW Power Kits are the only form of “tuning kits” approved and covered under the BMW of North America limited warranty. Power Kits are designed and tested by BMW engineers to provide the highest power increase without sacrificing reliability.

Only for cars with option code S840 - factory oil cooler & increased top speed limiter. Please check your BMWs option list before purchase. ZSP Cars include this option.
Requires installation at your local BMW dealership (typically 2-3 hours)


Kit includes a red envelope containing a release code certificate that includes the key numbers required to install the Power Kit software at your local BMW dealership, along w/ BMW Peformance Power Kit label.

**Installation times and cost may vary depending on dealership. Please check with your local BMW dealership to get actual quote on installation.

This item fits the following BMWs:
2011+ E82 BMW 135i
2011-2012 E90 BMW 335i 335xi 335i xDrive - Sedan
2011-2013 E92 BMW 335i 335xi 335i xDrive - Coupe
2011-2013 E93 BMW 335i - Convertible
Part #: 11122219489
Price: $477.32 (USD) 
Free Shipping Free Shipping
Quantity:   
E9X M3 Turner Test Pipes and Software Bundle

CAT DELETE + RACE SOFTWARE PACKAGE
Max HP gain = 48 hp
Max Trq gain = 32 ft-lbs

For a performance upgrade on your E90/E92 M3 there is nothing better than the cat-delete with specialized software. This combination produces over 40whp and 30wft-lbs with no other modifications - a massive gain on an already impressive engine!

Our Race software has been fine-tuned over the years beginning with our IMSA/CTSCC E92 M3 racecars (2011 GS class champions). We modify over 40 different maps in the ECU for such things as fuel and timing maps at part throttle and full throttle, revised torque settings, knock control, VANOS and cam timing, pedal input, top speed limiter, and rev limiters. Additional tuning has been done for the cat delete - prevent limp mode and check engine lights, fault codes for cat delete, and turning off the secondary air pump (to satisfy race series regulations). Turning off the secondary air pump also disables the cold start sequence so your idle and warm-up will be smoother and quieter. A built-in cold start rev limiter safeguards the engine internals until the oil warms up. Not only is there a lot more power at all RPM but the engine is more responsive and smoother!

Our M3 Test Pipes were designed specifically for race/track use and offer a cost-effective means of removing the very restrictive primary cats. On our Turner M3 and BMW Motorsport M3 GT4 racecars the primary cats and restrictive piping is eliminated. Our M3 cat delete pipes were the first on the market and have proven again and again to make big power on their own or especially when paired with our Stage 2 performance software. Our Test Pipes are Made in the USA with strict production tolerances and quality control. We manufacture our pipes with high quality, mandrel-bent stainless steel pipes and laser-cut flanges for an optimum fitment. New gaskets are included. The factory secondary cats remain in place. Your original O2 sensors plug into the Turner Test Pipes.

Our software is installed via the Turner flashing OBD tool. This tool plugs into the OBD socket in the dash and the performance software is installed from a laptop computer connected to the tool. It also works as a fault code scanner to read and reset diagnostic trouble codes and reset adaptations. The software program requires a Windows XP/Vista/7/8/10 laptop and the installation and setup are very easy (click here for instructions). The OBD tool, cable, and files are shipped to you with simple setup instructions. There is no need to remove your ECU and ship it. You can have your M3 flashed in under an hour from the convenience of your garage or driveway!

Turner Race Software Options:

Minimum Octane

You can choose between 91 or 93. We have developed tuning for the standard 'high octane' premium fuel found around the country (91 is the maximum available in some areas). Our power and torque gains are advertised with 91. If using 93 we can alter the knock sensor logic to extract more power with the higher grade fuel. Additional race fuel maps are also available, contact us for details.

Rev Limit

On 6-speed manual cars we can set a higher engine rev limit. 8,300 is stock; 8,400 is what was used on the GTS model in Europe; 8,600 is the safest raised rev limit that we have used in our race cars. To make things simple we offer it as either stock 8,300 or raised to 8,600. On DCT cars the higher rev limits are for M shift modes only (manual/paddle shift). The higher revs do not work in full auto D modes. Work is continuing on higher limits for D mode.

Launch Control

Our software can also enable a Launch Control feature. To use it, activate M Dynamic Mode, engage first gear, hold the throttle to the floor (it will only rev to 3,500 RPM), and dump the clutch. Keep your foot to the floor and hang on! You don't have to modulate the clutch and throttle - the engine and DSC modules will handle the launch. We experimented with different launch points and found that 3,500 RPM offers a great combination of tire hook-up and torque output. This is available on manual transmission cars only (DCT has their own built-in launch control).

M Dynamic Mode Steering

We can set the M Dynamic Mode (MDM) steering effort as the standard steering. The MDM steering is heavier and requires more effort when driving at higher speeds. Some owners feel that the standard steering is too light and over-boosted and the MDM steering is a nice change. This does not affect the steering effort, or the other features, of MDM.

240E Update

Our performance and race software is built around a specific version of stock BMW software (version 240E). It was released towards the end of M3 production and includes a number of significant changes over older versions for drivability and torque managment. 240E was such a big step forward that it's considered an upgrade all on its own. No worry if you don't have 240E - we will provide you with a free update before the Turner performance software is installed.

In 2015 BMW released a 241E update. There are minor changes to the software code but the tuning maps and data are all the same as the 240E version so there is no need to update to 241E. If the dealer offers it we recommend that you decline. If you're already on 240E there is no reason to switch to 241E (the tuning maps are the same).

***This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.***


Click here for E92 M3 Test Pipe installation instructions.

This package fits the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible

Part #: TMS224294
Price: $1398.95 (USD) 
AC Schnitzer Performance Module

This Performance Module is a direct plug-in to the existing engine harness for a factory appearance and fitment and an instant power increase without risk. This offers more power and torque without the hassle of an in-depth, time-consuming install! It installs in less than 30 minutes and is completely reversible which makes this the easiest and most effective power upgrade you will ever make on this car. If you're looking for a substantial bump in power output, with minimal downtime for installation, full serviceability, and can be reverted back to stock then the AC Schnitzer power module is the way to go! 

Schnitzer got it's start racing BMW's in 1967 and has since gone onto win many championships in DTM, WTCC and other touring car series. In 1987 AC Schnitzer started manufacturing custom high performance products for BMW's using their knowledge from years of racing and winning with BMW's. AC Schnitzer offers the highest quality components for your BMW. 

Part #: 110082340-48
Price: $4695.00 (USD) 
Quantity:   
Turner Stage 2 Race Software for E9X M3


RACE SOFTWARE TO BE USED WITH FRONT CAT DELETE
Max HP gain = 17 hp
Max Trq gain = 19 ft-lbs
Rev Limit = up to 8600 RPM

Our Race software was co-developed along with our cat-delete Test Pipes and our IMSA E92 M3 racecars. Dyno-tuned and race-proven, this software will get the most from a cat delete upgrade on the E9X M3. The combination of the software and Test Pipes produces over 40whp and 30wft-lbs with no other modifications - a massive gain on an already impressive engine.

Our Race software has been fine-tuned over the years beginning with our IMSA/CTSCC E92 M3 racecars (2011 GS class champions). We modify over 40 different maps in the ECU for such things as fuel and timing maps at part throttle and full throttle, revised torque settings, knock control, VANOS and cam timing, pedal input, top speed limiter, and rev limiters. Additional tuning has been done for the cat delete - prevent limp mode and check engine lights, fault codes for cat delete, and turning off the secondary air pump. Turning off the secondary air pump also disables the cold start sequence so your idle and warm-up will be smoother and quieter. A built-in cold start rev limiter safeguards the engine internals until the oil warms up. Not only is there a lot more power at all RPM but the engine is more responsive and smoother!

The Race software is only for cars with the primary cats removed via Test Pipes or similar race exhaust. We developed this along with our own Test Pipes but the software can also be used with other brands of cat-delete pipes too. In addition to our own exhaust, we have used our software with the Akrapovic Evolution exhaust, Supersprint cat-delete and sport cats, aFe race center pipes, Borla Test Pipes, and others. If you have other modifications done to your M3, we can supply you with specially-developed software to maximize the gains from those upgrades. Click on the blue banners below to see more detailed information on the software options we offer. Select all those that apply in the menu below.

Turner Motorsport has been developing software on the S65 since our first car in 2008. Since then we have done software projects for street, track, full-race, stroker, and supercharged engine builds using the stock MSS60 DME or a stand-alone Bosch or Motec system. Engine tunes have been developed and checked on our Dynapack chassis dyno and further refined with real world testing. Our Race software is based on the tuning we did for the CTSCC racing series, which we won the championship in 2011. For track cars, our Stage 2 cat-delete software will clear check engine lights and faults related to cat and air pump delete (to satisfy race series regulations).

Our software is installed via the Turner flashing OBD tool. This tool plugs into the OBD socket in the dash and the performance software is installed from a laptop computer connected to the tool. It also works as a fault code scanner to read and reset diagnostic trouble codes and reset adaptations. The software program requires a Windows XP/Vista/7/8/10 laptop and the installation and setup are very easy (click here for instructions). The OBD tool, cable, and files are shipped to you with simple setup instructions. There is no need to remove your ECU and ship it. You can have your M3 flashed in under an hour from the convenience of your garage or driveway!

E9X M3 Stage 2 Power Gains:

SpecPower Gain (Engine)Torque Gain (Engine)

Software upgrade alone+17hp+19ft-lbs

Software and Test Pipes+48hp+33ft-lbs


Stage 2 Race Software Options:

Minimum Octane

(click to expand)

You can choose between 91 or 93. We have developed tuning for the standard 'high octane' premium fuel found around the country (91 is the maximum available in some areas). Our power and torque gains are advertised with 91. If using 93 we can alter the knock sensor logic to extract more power with the higher grade fuel. Additional race fuel maps are also available, contact us for details.

Rev Limit

(click to expand)

On 6-speed manual cars we can set a higher engine rev limit. 8,300 is stock; 8,400 is what was used on the GTS model in Europe; 8,600 is the safest raised rev limit that we have used in our race cars. To make things simple we offer it as either stock 8,300 or raised to 8,600. On DCT cars the higher rev limits are for M shift modes only (manual/paddle shift). The higher revs do not work in full auto D modes. Work is continuing on higher limits for D mode.

Launch Control

(click to expand)

Our software can also enable a Launch Control feature. To use it, activate M Dynamic Mode, engage first gear, hold the throttle to the floor (it will only rev to 3,500 RPM), and dump the clutch. Keep your foot to the floor and hang on! You don't have to modulate the clutch and throttle - the engine and DSC modules will handle the launch. We experimented with different launch points and found that 3,500 RPM offers a great combination of tire hook-up and torque output. This is available on manual transmission cars only (DCT has their own built-in launch control).

Disbale Cold Start

(click to expand)

This feature is for off-road/track driven cars only. Under the original setup, a secondary air pump will turn on when the engine is started. This is to add fresh air to mix with the rich fuel mixture and heat the catalytic converters faster (rich mixtures are bad for the cats). The air pump stops running when the engine gets to a specified temp and the fuel mixture leans out. Unfortunately, the air pump system raises the idle and produces a very harsh and loud tone to the exhaust. The sound is worse when the catalytic converters are removed (such as on a track or race car) because the exhaust is more open. We will disable the air pump system so it does not activate when the engine is started. You get a super smooth and quiet startup that is a night and day difference compared to the original. This feature should only be used on cars that have had cats removed because the rich fuel mixture at startup will degrade the catalytic converters much quicker.

M Dynamic Mode Steering

(click to expand)

We can set the M Dynamic Mode (MDM) steering effort as the standard steering. The MDM steering is heavier and requires more effort when driving at higher speeds. Some owners feel that the standard steering is too light and over-boosted and the MDM steering is a nice change. This does not affect the steering effort, or the other features, of MDM.

240E Update

(click to expand)

Our performance and race software is built around a specific version of stock BMW software (version 240E). It was released towards the end of M3 production and includes a number of significant changes over older versions for drivability and torque managment. 240E was such a big step forward that it's considered an upgrade all on its own. No worry if you don't have 240E - we will provide you with a free update before the Turner performance software is installed.

In 2015 BMW released a 241E update. There are minor changes to the software code but the tuning maps and data are all the same as the 240E version so there is no need to update to 241E. If the dealer offers it we recommend that you decline. If you're already on 240E there is no reason to switch to 241E (the tuning maps are the same).

 


Video:

 

 

click for high quality

 

This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.


This performance engine software (reflash) is for the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible

Part #: TMS1979
Price: $999.00 (USD) 
aFe Scorcher Programmer Upgrade - N55 - E82 135i, E9X 335i, F30 335i, F32 435i, F10 535i, E70 X5 35i, E71 X6 35i As Used on our Project F30 335i THE EASIEST WAY TO MORE POWER
HP gain = up tp 40 hp
Trq gain = up tp 80 ft-lbs
Plug And Play Engine Harness!
Power Without Worry!


There's no secret to getting additional power from a turbo engine - turn up the boost! But it's easy to take things too far and become "boost drunk". If what you're after is a generous bump in power without worrying about reliability, compromises, or additional modifications the aFe Power Scorcher is perfect for you. We've tried the Scorcher in a number of different BMWs and can report back that it works flawlessly!

Our findings:
  • Incredibly simple installation - by the third car we tested with we had the install down to 5 minutes!
  • High build quality - it looks and feels like a real part - not homemade like others we have seen
  • Immediate power gains - right from our parking lot we could feel the substantial difference
  • Affordable power - great bang for the buck
    The Scorcher is a plug-and-play tuning module that installs on the engine wiring harness and modifies the signals from the manifold pressure sensors. The new signals are then sent to the engine computer which increases boost based on the modified signal. The power gains are instantly noticeable and the module has been fully engineered to deliver a smooth and reliable power boost over all RPM. aFe developed this module upgrade on their in-house Mustang and Dynojet dynos as well as using them on their own BMW 135s and 335s. There are other products that give more power (for additional cost and complexity) but more boost also brings more complications. This is all of the power you need without additional drama and trickery. The Scorcher can be used on its own or combined with other aFe Power products for the total package.

    The install is very easy with no cutting or modification to existing components. Unplug the harness from your MAP sensors and plug it into the Scorcher module. Then plug the Scorcher harness into the MAP sensors. Mount the module wherever you wish (Velcro and zip ties included). A blue LED lets you know the module is plugged in correctly and functioning. You can also revert back to stock just as easily! The Scorcher is built with a 0.1% tolerance on critical components. Each connector is an OE type for the best and most secure fitment and they use high quality wiring with excellent heat and chemical resistance. The module box is aluminum with a hardcoat anodize finish. This is way beyond the other 'resistor in a box' products on the market. aFe warranties the complete unit for two years.

    BMW used two different TMAP sensors on the intake pipe. You will need to confirm which TMAP sensor is installed on your car. Refer to this image, and the drawing on the right, for more information: click here.

    This item fits the following BMWs:
    2011-2013 E82 BMW 135i
    2014+ F22 BMW M235i M235i xDrive
    2011 E90 BMW 335i 335xi 335i xDrive - Sedan
    2011-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
    2011-2013 E93 BMW 335i - Convertible
    2012+ F30 BMW 335i 335i xDrive - Sedan
    2014+ F34 BMW 335i xDrive GT - Gran Tourismo
    2013+ F32 BMW 435i 435i xDrive - Coupe
    2013+ F33 BMW 435i Convertible - Convertible
    2014+ F36 BMW 435i Gran Coupe 435i xDrive Gran Coupe
    2010+ F07 BMW 535i GT, 535i xDrive GT
    2011+ F10 BMW 535i 535i xDrive
    2012+ F12 BMW 640i 640i xDrive
    2013+ F06 BMW 640i Gran Coupe 640i xDrive Gran Coupe
    2012+ F01 BMW 740i 740li 740li xDrive
    2013+ E84 BMW X1 xDrive35i
    2011+ F25 BMW X3 xDrive35i
    2015+ F26 BMW X4 xDrive35i
    2011+ E70 BMW X5 xDrive35i
    2014+ F15 BMW X5 sDrive35i X5 xDrive35i
    2011+ E71 BMW X6 xDrive35i
  • Part #: 77-4630x
    Price: $449.00 (USD) 
    Free Shipping Free Shipping
    Cobb Tuning AccessPort V3 - 135i 1M 335i 535i Z4 35i/is (N54 Engine 2007-10) THE EASIEST WAY TO 85+ HP ON THE N54 TWIN-TURBO!
    HP gain = 85+ hp
    Trq gain = 100+ ft-lbs
    Plug-In Power! Easy to use and completely reversible!
    Expect higher gains with additional modifications


    New Features
    Larger, full color, higher resolution screen
    We super sized the screen for ease of use and better monitoring. Full text help menus, multi-gauge layouts, full map descriptions and more. This screen has room to spare - so no need to run back to your laptop.

    Customizable multi-gauge display
    Want gauges? No problem. The V3 now supports up to 6 fully customizable gauges with 1/1000 resolution. Monitor all the parameters you want to see and customize each layout for street, strip or track.

    In vehicle mount, with on/off switch
    There is nothing we like more to see than an AP peeking over the dash. With the on/off button and using the included universal mount or vehicle specific options, there is no reason not to run your AP in-vehicle.

    Faster and easier to use with a familiar face
    We listened to what you wanted. Use your same maps, monitor your same parameters, and troubleshoot your same codes, but now with more. More speed, more memory, more map storage, more live gauges, and more troubleshooting help.

    Interchangeable faceplates
    Is it your Accessport or our Accessport? It's yours. Customize it as you see fit. The new V3 comes with 2 interchangeable bezels, blue and grey, or put your own touches on one.

    The Cobb Tuning AccessPort is a flashing tool that installs performance software through the OBD port on your car. No other software is as easy to use and install! If you can program a TV remote, you're over-qualified to install this software. Just plug the AccessPort into the OBDII port under the dash, bring up the AccessPort onscreen menu, select from a variety of engine maps for your desired performance and install. It's that easy. The software is from COBB Tuning - one of the most accomplished software tuners in the business. The Cobb software replaces the conservative factory settings with different maps to make more power.

    The AccessPort maintains the sophisticated control logic, refined engine response and excellent driveability of the stock BMW computer while providing impressive power gains and improved performance. Pre-loaded on the AccessPort are engine maps for 91 or 93 octane fuel, and a valet mode, with the capacity to hold up to 100 other tuning files! The AccessPort also saves your stock tune for you to revert back to factory settings at any time. It also has the the ability to download additional maps so that you can run various upgrades with the correct software tune. Additional tunes are available direct from Cobb through their AccessPort manager program (available for PC or OSX). Cobb also provides tech support.

    In addition to the performance improvements, the AccessPort includes a variety of other useful tools -
    + performance measurements
    + data logging - up to 10 hours
    + fault code/DTC reading and clearing
    + check/verify performance modifications - measures 0-60 and ¼ mile times and can measure approximate HP

    The AccessPort can display boost pressure, oil temperature, pedal position, load, individual cylinder timing, and other engine data channels with the Live Data feature.


    Typical Performance Gains:
    135i 335i 335xi Z4 35i +30% Peak HP & +38% Peak TQ
    535i 535xi - +19.2% Peak HP & +30.5% Peak TQ

    This item fits the following BMWs with N54 turbo engines:
    2008-2010 E82 BMW 135i
    2011+ E82 BMW 1M Coupe
    2007-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
    2007-2012 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
    2007-2012 E93 BMW 335i 335is Convertible
    2007-2010 E60 BMW 535i 535xi 535i xDrive
    2009+ Z4 sDrive35i Z4 sDrive35is
    Part #: AP3-BMW-001
    Price: $650.00 (USD) 
    Free Shipping Free Shipping
    Quantity:   
    Turner Performance Software for E9X 328i

    MORE POWER, BETTER DRIVEABILITY!
    Max HP gain = 19 hp
    Max Trq gain = 19 ft-lbs
    Rev Limit = 7000 RPM

    Our software fully maximizes the 'high-output' N52B30M1 engine in the 328i. Our software has been carefully developed on the dyno and the road to provide optimal power and torque gains at all RPM. We change the fuel, Valvetronic, and VANOS maps as well as revise the factory torque limiters. We have paid particular attention to increasing low and mid-range torque. The stock BMW software is hampered by settings for 87 octane fuel. By re-mapping the engine programming for 91 octane, we can make more power, torque, and improve fuel mileage - all without harm to the engine or affecting driveability. The throttle response is also improved (quicker) eliminating unwanted and dangerous flat spots in the pedal response.

    There are two ways to install our software: mailing the ECU to us for a reflash or do-it-yourself install with our Turner Flash tool:

    Mail-In Reflash - lower upfront cost but additional shipping charges. Minimum downtime of at least three days. We have a 24 hour turnaround on shipping the ECU back to you but factor in transit time. Expert installation of your software at our facility.
    Turner Flash DIY tool - higher upfront cost but files are emailed back and forth. No downtime - you can still drive the car while we process your tune. Files are emailed back and forth - your stock file comes to us, a tuned file is returned to you. Easy install via Windows laptop using these instructions (click here).

    Should you choose to mail your ECU to us, follow these specific instructions on shipping the computer (click here). We will provide you a free Next Day Air shipping label to get your ECU to us quickly - and returned just as fast. We will contact you to arrange a time to ship in your ECU to further minimize downtime.

    This item fits the following BMWs:
    2007-2011 E90 BMW 328i 328xi - Sedan
    2007-2011 E91 BMW 328i 328xi - Touring Wagon
    2007-2013 E92 BMW 328i 328xi - Coupe
    2007-2013 E93 BMW 328i - Convertible

    Part #: AN52NM1-328
    Price: $459.00 (USD) 
    Free Shipping Free Shipping
    aFe Scorcher Programmer Upgrade - N54 - E60 535i, E71 X6 35i, E82 135i/1M, E89 Z4 35i, E9X 335i 07-10

    THE EASIEST WAY TO MORE POWER
    HP gain = up tp 40 hp
    Trq gain = up tp 51 ft-lbs
    Plug And Play Engine Harness!
    Power Without Worry!

    There's no secret to getting additional power from a turbo engine - turn up the boost! But it's easy to take things too far and become "boost drunk". If what you're after is a generous bump in power without worrying about reliability, compromises, or additional modifications the aFe Power Scorcher is perfect for you. We've tried the Scorcher in a number of different BMWs and can report back that it works flawlessly!

    Our findings:

    • Incredibly simple installation - by the third car we tested with we had the install down to 5 minutes!
    • High build quality - it looks and feels like a real part - not homemade like others we have seen
    • Immediate power gains - right from our parking lot we could feel the substantial difference
    • Affordable power - great bang for the buck

    The Scorcher is a plug-and-play tuning module that installs on the engine wiring harness and modifies the signals from the manifold pressure sensors. The new signals are then sent to the engine computer which increases boost based on the modified signal. Up to 4 more psi is available on the N54 engine. The power gains are instantly noticeable and the module has been fully engineered to deliver a smooth and reliable power boost over all RPM. aFe developed this module upgrade on their in-house Mustang and Dynojet dynos as well as using them on their own BMW 335s. There are other products that give more power (for additional cost) but more boost also brings more complications. This is all of the power you need without additional drama and trickery. The Scorcher can be used on its own or combined with other aFe Power products for the total package.

    The install is very easy with no cutting or modification to existing components. Unplug the harness from your MAP sensors and plug it into the Scorcher module. Then plug the Scorcher harness into the MAP sensors. Mount the module wherever you wish (Velcro and zip ties included). A blue LED lets you know the module is plugged in correctly and functioning. You can also revert back to stock just as easily! The Scorcher is built with a 0.1% tolerance on critical components. Each connector is an OE type for the best and most secure fitment and they use high quality wiring with excellent heat and chemical resistance. The module box is aluminum with a hardcoat anodize finish. This is way beyond the other 'resistor in a box' products on the market. aFe warranties the complete unit for two years.

    This item fits the following BMWs:
    2007-2010 E60 BMW 535i 535xi 535i xDrive
    2008-2011 E71 BMW X6 xDrive35i
    2008-2010 E82 BMW 135i
    2011-2012 E82 BMW 1M Coupe
    2009-2010 Z4 BMW Z4 sDrive35i Z4 sDrive35is
    2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
    2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
    2007-2010 E93 BMW 335i - Convertible

    Part #: 77-46302
    Price: $449.00 (USD) 
    Free Shipping Free Shipping
    Quantity:   
    Turner Performance Software for E9X 328i (SULEV)

    MORE POWER, IMPROVED EFFICIENCY!!
    Max HP gain = 15 hp
    Max Trq gain = 12 ft-lbs
    Rev Limit = 7000 RPM

    Our software fully maximizes the N51 engine in the 328i while in SULEV spec (Super Ultra Low Emission Vehicle). The stock BMW software is hampered by settings for 87 octane fuel. By re-mapping the engine programming for 91 octane, we can make more power, torque, and improve fuel mileage - all without harm to the engine or affecting driveability. We have paid particular attention to increasing low and mid-range torque. The throttle response is also improved (quicker) eliminating unwanted and dangerous flat spots in the pedal response.

    This software file is for the N51 engine SULEV model only. SULEV is a specification used in some parts of the US where emissions compliance is critical (mostly in California, the Northwest, and the Northeast). The computer and engine specs are different than the 'regular' 328i N52 engine.

    There are two ways to install our software: mailing the ECU to us for a reflash or do-it-yourself install with our Turner Flash tool:

    Mail-In Reflash - lower upfront cost but additional shipping charges. Minimum downtime of at least three days. We have a 24 hour turnaround on shipping the ECU back to you but factor in transit time. Expert installation of your software at our facility.
    Turner Flash DIY tool - higher upfront cost but files are emailed back and forth. No downtime - you can still drive the car while we process your tune. Files are emailed back and forth - your stock file comes to us, a tuned file is returned to you. Easy install via Windows laptop using these instructions (click here).

    Should you choose to mail your ECU to us, follow these specific instructions on shipping the computer (click here). We will provide you a free Next Day Air shipping label to get your ECU to us quickly - and returned just as fast. We will contact you to arrange a time to ship in your ECU to further minimize downtime.


    This item fits the following BMWs:
    2007+ E90 BMW 328i 328xi 328i xDrive - with N51 SULEV engine - Sedan
    2007+ E91 BMW 328i 328xi 328i xDrive - with N51 SULEV engine - Wagon
    2007+ E92 BMW 328i 328xi 328i xDrive - with N51 SULEV engine - Coupe
    2007+ E93 BMW 328i - with N51 SULEV engine - Convertible

    Part #: AN51-328
    Price: $459.00 (USD) 
    Free Shipping Free Shipping
    AC Schnitzer Performance Module

    This Performance Module is a direct plug-in to the existing engine harness for a factory appearance and fitment and an instant power increase without risk. This offers more power and torque without the hassle of an in-depth, time-consuming install! It installs in less than 30 minutes and is completely reversible which makes this the easiest and most effective power upgrade you will ever make on this car. If you're looking for a substantial bump in power output, with minimal downtime for installation, full serviceability, and can be reverted back to stock then the AC Schnitzer power module is the way to go! Further yet, AC Schnitzer offers a full 24-month warranty!

    Schnitzer got it's start racing BMW's in 1967 and has since gone onto win many championships in DTM, WTCC and other touring car series. In 1987 AC Schnitzer started manufacturing custom high performance products for BMW's using their knowledge from years of racing and winning with BMW's. AC Schnitzer offers the highest quality components for your BMW. 

    Part #: 1100287310-24
    Price: $3995.00 (USD) 
    Quantity:   
    Cobb Tuning AccessPort V3 - 135i 335i (N55 Engine 2011) THE EASIEST WAY TO 55+ HP WITH THE N55
    HP gain = 55+ hp
    Trq gain = 78+ ft-lbs
    Plug-In Power! Easy to use and completely reversible!


    New Features
    Larger, full color, higher resolution screen
    We super sized the screen for ease of use and better monitoring. Full text help menus, multi-gauge layouts, full map descriptions and more. This screen has room to spare - so no need to run back to your laptop.

    Customizable multi-gauge display
    Want gauges? No problem. The V3 now supports up to 6 fully customizable gauges with 1/1000 resolution. Monitor all the parameters you want to see and customize each layout for street, strip or track.

    In vehicle mount, with on/off switch
    There is nothing we like more to see than an AP peeking over the dash. With the on/off button and using the included universal mount or vehicle specific options, there is no reason not to run your AP in-vehicle.

    Faster and easier to use with a familiar face
    We listened to what you wanted. Use your same maps, monitor your same parameters, and troubleshoot your same codes, but now with more. More speed, more memory, more map storage, more live gauges, and more troubleshooting help.

    Interchangeable faceplates
    Is it your Accessport or our Accessport? It's yours. Customize it as you see fit. The new V3 comes with 2 interchangeable bezels, blue and grey, or put your own touches on one.


    The Cobb Tuning AccessPort is a flashing tool that installs performance software through the OBD port on your car. No other software is as easy to use and install! If you can program a TV remote, you're over-qualified to install this software. Just plug the AccessPort into the OBDII port under the dash, bring up the AccessPort onscreen menu, select from a variety of engine maps for your desired performance and install. It's that easy. The software is from COBB Tuning - one of the most accomplished software tuners in the business. The Cobb software replaces the conservative factory settings with different maps to make more power. But it's more than just a way of loading performance software... The AccessPort also functions as a data logger and fault code reader . It's a multi-function tool that you will never get tired of picking up and checking out.

    Data
    Since it plugs into the car's OBD communication port it has unparalleled access to a stream of engine data. It reads and displays throttle position, boost, ignition advance, wastegate duty cycle, mass air flow, intake air temperature, air/fuel ratio, calculated load, and much more. You can also record data for later analysis - up to 10 hours of running data! It also works as a timing meter for 0-60, 1/8 mile, 60' acceleration, 330' acceleration, and 1,000' acceleration time. You can plug the AccessPort into a PC or Mac and view all of this saved data in their program. This information is invaluable for evaluating engine performance and performance modifications.

    Diagnostics
    With access to the OBD port, the Cobb tuner can also read and reset Diagnostic Trouble Codes (DTCs). This saves you a trip to the dealer or local shop simply to have a fault code interpreted. Now you can pull these codes and get an answer to the problem right away! The code number and a brief description of the code is given so you won't even have to search for it online. Reset the code and you're on your way (unless the code comes back...).

    Power
    The AccessPort comes pre-loaded with 4 tuning files - Stage 0 (stock), Stage 1 Sport (91 octane), Stage 1 Aggressive (93 octane), and a Valet file. Additional files are available from the Cobb website for things such as an intake and larger intercooler. It can hold up to 100 different tuning files! It also saves your stock original file so you can revert back to stock at any time. The AccessPort maintains the sophisticated control logic, refined engine response and excellent driveability of the stock BMW computer while providing impressive power gains and improved performance. Cobb engineers are constantly revising and tuning their files to extract the most horsepower with the least effect on reliability and drivability. Updated files and new maps for additional modifications are available direct from Cobb.

    Typical Power Gains:
    CarPeak Power Gain
    91 octane
    Peak Power Gain
    93 octane
    135i/335i/335xi N55+32hp (+10%)
    +42ft-lbs (+14%)
    +56hp (+18%)
    +78ft-lbs (+26%)


    Additional Resources

    This item fits the following BMWs with the N55 single-turbo engine:
    2011 E82 BMW 135i 135is
    2011 E90 BMW 335i 335xi 335i xDrive - Sedan
    2011 E92 BMW 335i 335xi 335i xDrive - Coupe
    2011 E93 BMW 335i - Convertible
    Part #: AP3-BMW-002
    Price: $650.00 (USD) 
    Free Shipping Free Shipping
    Quantity:   
    Turner Stage 1 Performance Software for E9X M3

    INSTANT POWER GAIN WITH NO DOWNSIDE!
    Max HP gain = 17 hp
    Max Trq gain = 19 ft-lbs
    Rev Limit = up to 8,600 RPM

    Adding power and torque to your M3's V8 is as easy as a flash! Where we can make our software better is by tuning it for higher octane gasoline. The stock software is tuned around the 87 octane available in the US (not that most people would use 87 but BMW engineers must account for that possibility). With our software, the performance of the S65 engine is optimized for the higher 91 or 93 octane. We tune many areas of the engine programming - fuel and timing maps at part throttle and wide-open throttle, revised torque settings and knock control, VAN0S variable valve timing, and more. The throttle response is also improved (quicker and smoother) eliminating unwanted and dangerous flat spots in the factory pedal response. We also offer raised rev limits and the top speed is raised/eliminated. Our software uses the factory 240E update as a base. The 240E has several major enhancements over previous factory file versions. No worry if you don't have 240E - we will provide you with a free update before the Turner performance software is installed. If you have other modifications done to your M3, we can supply you with specially-developed software to maximize the gains from those upgrades.

    Turner Motorsport has been developing software on the S65 since our first car in 2008. Since then we have done software projects for street, track, full-race, stroker, and supercharged engine builds using the stock MSS60 DME or a stand-alone Bosch or Motec system. Engine tunes have been developed and checked on our Dynapack chassis dyno and further refined with real world testing. For track cars, our Stage 2 cat-delete software will clear check engine lights and faults (to satisfy race series regulations).

    Our software is installed via the Turner flashing OBD tool. This tool plugs into the OBD socket in the dash and the performance software is installed from a laptop computer connected to the tool. It also works as a fault code scanner to read and reset diagnostic trouble codes and reset adaptations. The software program requires a Windows XP/Vista/7/8/10 laptop and the installation and setup are very easy (click here for instructions). The OBD tool, cable, and files are shipped to you with simple setup instructions. There is no need to remove your ECU and ship it. You can have your M3 flashed in under an hour from the convenience of your garage or driveway!


    Stage 1 Performance Software Options:

    Minimum Octane

    (click to expand)

    You can choose between 91 or 93. We have developed tuning for the standard 'high octane' premium fuel found around the country (91 is the maximum available in some areas). Our power and torque gains are advertised with 91. If using 93 we can alter the knock sensor logic to extract more power with the higher grade fuel. Additional race fuel maps are also available, contact us for details.

    Rev Limit

    (click to expand)

    On 6-speed manual cars we can set a higher engine rev limit. 8,300 is stock; 8,400 is what was used on the GTS model in Europe; 8,600 is the safest raised rev limit that we have used in our race cars. To make things simple we offer it as either stock 8,300 or raised to 8,600. On DCT cars the higher rev limits are for M shift modes only (manual/paddle shift). The higher revs do not work in full auto D modes. Work is continuing on higher limits for D mode.

    Launch Control

    (click to expand)

    Our software can also enable a Launch Control feature. To use it, activate M Dynamic Mode, engage first gear, hold the throttle to the floor (it will only rev to 3,500 RPM), and dump the clutch. Keep your foot to the floor and hang on! You don't have to modulate the clutch and throttle - the engine and DSC modules will handle the launch. We experimented with different launch points and found that 3,500 RPM offers a great combination of tire hook-up and torque output. This is available on manual transmission cars only (DCT has their own built-in launch control).

    M Dynamic Mode Steering

    (click to expand)

    We can set the M Dynamic Mode (MDM) steering effort as the standard steering. The MDM steering is heavier and requires more effort when driving at higher speeds. Some owners feel that the standard steering is too light and over-boosted and the MDM steering is a nice change. This does not affect the steering effort, or the other features, of MDM.

    240E Update

    (click to expand)

    Our performance and race software is built around a specific version of stock BMW software (version 240E). It was released towards the end of M3 production and includes a number of significant changes over older versions for drivability and torque managment. 240E was such a big step forward that it's considered an upgrade all on its own. No worry if you don't have 240E - we will provide you with a free update before the Turner performance software is installed.

    In 2015 BMW released a 241E update. There are minor changes to the software code but the tuning maps and data are all the same as the 240E version so there is no need to update to 241E. If the dealer offers it we recommend that you decline. If you're already on 240E there is no reason to switch to 241E (the tuning maps are the same).

     


    This item fits the following BMWs:
    2008-2011 E90 BMW M3 - Sedan
    2008-2013 E92 BMW M3 - Coupe
    2008-2013 E93 BMW M3 - Convertible

     

    Part #: TMS1974
    Price: $799.00 (USD) 
    Get notified about money saving
    specials & deals for your BMW
    enter your email address
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook




    • 1-800-280-6966
      Mon-Thur 9am-6pm ET, Fri 9am-5pm ET

      • © TurnerMotorsport.com 1993-2017. All Rights Reserved.