Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

E93 D Force Flow Formed Alloy Wheels

E93 D Force Flow Formed Alloy Wheels D-Force Wheels has been one of the leading innovators in flow-formed alloy wheels for the BMW market. These wheels use a special manufacturing process that is a cross between forging and casting. Flow-forming is a process that results in a stronger wheel than the traditional casting process and less weight than a traditional forged wheel. Many high-quality and OEM wheel manufacturers are moving to this flow forming process. D-Force first gained credibility and fame with BMW CCA Club Racers throughout North America. A light weight, strong, and affordable race wheel proved to be a winning combination. D-Force Wheels are available in two distinct styles: LTW5 - light weight 5-spoke in 17" and 18" sizes and EmPower - light weight multi-spoke 'mesh' style wheel in an 18" size. For wheel information in general, check out our Wheel Tech Guide by clicking here.

LTW5 EmPower
You're currently viewing parts for your (E93) 3-Series Convertible 2007-2013. Reset your chassis
For accurate results, specify your model below.
D-Force LTW5 18x9.0
Wheel Specs
Fitment:Front* / Rear
Size:18x9.0"
Offset (mm):41
Weight (lbs):18
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
D-Force Wheels
Part #: LTW518x9-FB-ET41
Price: $259.95 (USD) 
Direct Ship
Quantity:   
D-Force LTW5 18x9.5
Wheel Specs
Fitment:Front* / Rear
Size:18x9.5"
Offset (mm):35
Weight (lbs):18.5
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
D-Force Wheels
Part #: TMS184566
Price: $299.95 (USD) 
Direct Ship
Quantity:   
D-Force LTW5 17x9.0
Wheel Specs
Fitment:Front / Rear
Size:17x9.0"
Offset (mm):41
Weight (lbs):17
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. This is an excellent wheel for SpecE46 (SE46). The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
D-Force Wheels
Part #: LTW517x9-S-ET41
Price: $259.95 (USD) 
Direct Ship
Quantity:   
E36, E46, E9X, Z3, Z4 D-Force EmPower 18-inch Wheel From the same manufacturer of the incredibly successful "LTW5" lightweight wheel, comes D-Force's second wheel design, named the EmPOWER wheel. This wheel is an 18 inch diameter wheel, available in 8.5" and 9.5" widths. It comes with a machined lip with your choice of either silver or anthracite painted centers. It's gorgeous styling harkens to some of the finest and highest performing wheels on the market. But it doesn't just have the looks, like many other wheels in this price range. It also has true high performance characteristics -- reduced mass and better strength.

Using a proprietary "Flow Forming" casting technology which includes heat treating, this wheel offers less mass / light weight without sacrificing strength. The 18x8.5" weighs in at just over 19 lbs, and the 18x9.5" weighs in at 20.9 lbs. This is an exceptional combination of price, looks, weight, and strength that you will be hard pressed to find anywhere else.

Recommended tire sizes:
18 x 8.5" (19.2 lbs, ET40) - 225/40, 235/35 - 255/35
18 x 9.5 (20.9 lbs, ET43) - 255/35 - 275/35 ** Rear Only **
These sizes are listed as a rough guide. Tire selection should be based on BMW model, and will depend on your BMW's suspension and available clearance. Have a fitment question? Call or email us!

These wheels can be used on 1992-2008 - 3 series, including the following BMWs :
E36 - 1992-1999 - 318i, 318is, 325i, 325is, 328i, 328is, 323is, and M3;
E46 - 1999-2005 323i, 323Ci, 325i, 325Ci, 328i, 328Ci, 330i, 330Ci;
E90 - 2006+ sedan - 325i, 328i, 330i, 335i;
E92 - 2007+ coupe - 328i, 335i
Z3 - 1996-2002 Z3 1.9 Z3 2.3 Z3 2.8 Z3 3.0
Z4 - 2003-2006 Z4 2.5 Z4 3.0

Note: careful consideration of wheel width and offset must be taken whenchoosing and installing wider and/or taller wheels. Adding larger wheels maylead to rubbing on suspension components or bodywork. Wheel spacers or otheradjustments may be required.

For more information on BMW wheels and wheel info in general, check out our Wheel Fitment Guide by clicking here.

Please choose wheel size and finish, below. Sold Individually.

D-Force Wheels
Part #: TMS340294
Price: $319.95 (USD) 
Direct Ship
D-Force LTW5 18x10.0
Wheel Specs
Fitment:Front* / Rear
Size:18x10.0"
Offset (mm):43
Weight (lbs):19
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
D-Force Wheels
Part #: LTW518x10-A-ET43
Price: $299.95 (USD) 
Direct Ship
Quantity:   
D-Force LTW5 17x8.5

Wheel Specs

Fitment:Front / Rear

Size:17x8.5"

Offset (mm):40

Weight (lbs):16

Profile:Flat

 

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.

D-Force Wheels
Part #: TMS184575
Price: $259.95 (USD) 
Direct Ship
Quantity:   
D-Force LTW5 17x8.0
Wheel Specs
Fitment:Front / Rear
Size:17x8.0"
Offset (mm):40
Weight (lbs):15.5
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
D-Force Wheels
Part #: LTW517x8-S-ET40
Price: $249.95 (USD) 
Direct Ship
Quantity:   
D-Force LTW5 18x9.5
Wheel Specs
Fitment:Front* / Rear
Size:18x9.5"
Offset (mm):35
Weight (lbs):18.5
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
D-Force Wheels
Part #: TMS180844
Price: $299.95 (USD) 
Direct Ship
Quantity:   
D-Force LTW5 17x8.5
Wheel Specs
Fitment:Front / Rear
Size:17x8.5"
Offset (mm):40
Weight (lbs):16
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
D-Force Wheels
Part #: TMS184573
Price: $259.95 (USD) 
Direct Ship
Quantity:   
17x8.5 - D-Force LWT5 Flat Black Wheel Set - E36 E46 E9x Z3 Z4 Act Quickly! Only 1 sets left at this price!

Wheel Specs
Fitment:Front / Rear
Size:17x8.5"
Offset (mm):40
Weight (lbs):16
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Set of 4 17x8.5" Flat Black Wheels.

This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
1996-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
D-Force Wheels
Part #: TMS200172
Price: $1039.80 (USD) 
Direct Ship
Quantity:   
D-Force LTW5 17x8.5
Wheel Specs
Fitment:Front / Rear
Size:17x8.5"
Offset (mm):40
Weight (lbs):16
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
D-Force Wheels
Part #: TMS184572
Price: $259.95 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
E36, E46, E82, E9X, Z3, Z4 D-Force LTW5 17x9.0 Square Race Wheel Set Looking for a tried and true square wheel setup for your E36 or E46 track car or Spec E46 (SE46) racecar? These LTW5 alloy wheels have proven themselves again and again, year after year, as one of the best track wheels on the BMW market.

They tick all of the right boxes in wheel design -
  • light weight - 17lbs
  • strong - built from a new proprietary semi-forged method
  • inexpensive - under $300 apiece
  • correct offset for the sizing - spacers are not usually required
  • lots of caliper clearance for big brakes

These wheels have been a favorite of Turner customers and our Turner project cars for years. When we want to build an E36 M3 track car, we go with these. There's never been a better inexpensive track wheel.

The LTW5 are built using a new flow-forming casting process that results in a denser concentration of aluminum alloy in the casting. It's a semi-forged wheel at a fraction of the cost of a true forged wheel. This keeps it as one of the strongest wheels out there but with light weight. D-Force started out designing wheels only for BMWs so the fitment and design is second to none. These wheels were built for an excellent fit within the E36 and E46 bodywork and for clearance to the most common types of struts and coil overs. The spoke design and backspacing is also very generous for big brake kits and caliper upgrades which means you may not need spacers.

Wheel Specs:
Front: 17x9.0 / ET 41 offset / 16.6lbs. Recommended tire size: 245-255Rear: 17x9.0 / ET 41 offset / 16.6lbs. Recommended tire size: 245-255

Fitment note: this is a very aggressive wheel for these applications. This wheel package is only intended for track or racecars that run very wide tires. Because of the widths and offsets involved, some tire contact and rubbing may occur on a suspension component or bodywork. We cannot guarantee fitment with all applications. Bodywork rubbing may have to be corrected with fender rolling, steering rack stops, or even a small spacer. Suspension contact will need to be corrected with spacers or alternative suspension components. If tire contact does concern you then we suggest using a narrower 8.5" wheel.

For more information on BMW wheels and wheel info in general, check out our Wheel Fitment Guide by clicking here.

This wheel set is intended for the following BMWs:
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2008-2012 E82 BMW 128i 135i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
D-Force Wheels
Part #: TMS14411
Price: $1126.28 (USD) 
$1138.32 (Sale - Save 1%)
Direct Ship
D-Force LTW5 18x9.5
Wheel Specs
Fitment:Front* / Rear
Size:18x9.5"
Offset (mm):35
Weight (lbs):18.5
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
D-Force Wheels
Part #: TMS184565
Price: $309.95 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
D-Force LTW5 18x9.0
Wheel Specs
Fitment:Front* / Rear
Size:18x9.0"
Offset (mm):41
Weight (lbs):18
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
D-Force Wheels
Part #: LTW518x9-S-ET41
Price: $259.95 (USD) 
Direct Ship
Quantity:   
D-Force LTW5 18x10.0
Wheel Specs
Fitment:Front* / Rear
Size:18x10.0"
Offset (mm):43
Weight (lbs):19
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
D-Force Wheels
Part #: TMS184582
Price: $299.95 (USD) 
Direct Ship
Quantity:   
D-Force LTW5 18x10.0
Wheel Specs
Fitment:Front* / Rear
Size:18x10.0"
Offset (mm):43
Weight (lbs):19
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
D-Force Wheels
Part #: LTW518x10-S-ET43
Price: $299.95 (USD) 
Direct Ship
Quantity:   
D-Force LTW5 17x8.0
Wheel Specs
Fitment:Front / Rear
Size:17x8.0"
Offset (mm):40
Weight (lbs):15.5
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
D-Force Wheels
Part #: LTW517x8-A-ET40
Price: $249.95 (USD) 
Direct Ship
Quantity:   
D-Force LTW5 17x9.0
Wheel Specs
Fitment:Front / Rear
Size:17x9.0"
Offset (mm):41
Weight (lbs):17
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. This is an excellent wheel for SpecE46 (SE46). The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
D-Force Wheels
Part #: LTW517x9-A-ET41
Price: $259.95 (USD) 
Direct Ship
Quantity:   
D-Force LTW5 17x9.0
Wheel Specs
Fitment:Front / Rear
Size:17x9.0"
Offset (mm):41
Weight (lbs):17
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. This is an excellent wheel for SpecE46 (SE46). The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
D-Force Wheels
Part #: LTW517x9-FB-ET41
Price: $259.95 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
D-Force LTW5 18x9.0
Wheel Specs
Fitment:Front* / Rear
Size:18x9.0"
Offset (mm):41
Weight (lbs):18
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
D-Force Wheels
Part #: LTW518x9-A-ET41
Price: $279.95 (USD) 
Direct Ship
Quantity: