click to Chat Live
Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart
Home
Categories
Specials Gifts & Clothing
  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages
Brakes
  1. Brake Overhaul Packages
  2. Brake Pads
  3. Brake Pad Sensors
  4. Brake Rotors
  5. StopTech Big Brake Kits
  6. Brembo Big Brake Kits
  7. Stainless Steel Brake Lines
  8. Brake Fluid
  9. Brake Calipers
  10. Caliper Rebuild Kits
  11. Parking Brake Parts
  12. Brake Master Cylinders
  13. ABS/DSC System Parts
  14. Brake Cooling Ducts & Backing Plates
  15. Brake Pads - Brembo GT BBK Calipers
  16. Brake Pads - StopTech BBK Calipers
  17. Hydraulic Hand Brakes
Car Care & Accessories
  1. Car Covers
  2. Wheel & Tire Cleaning
  3. Wax, Polish and Cleaning Supplies
  4. Detailing Gear
  5. Leather & Plastic Care
  6. Car Cleaning Supplies
  7. Chassis Paint, Coatings, Sealants, and Rust Conversion
Drivetrain
  1. Differential and Gearing Upgrades
  2. Differential Mounts and Upgrades
  3. OEM Clutch Kits & Clutch Parts
  4. Performance Clutch Kits & Parts
  5. Lightweight Aluminum Flywheel Upgrades
  6. Stock OEM Dual Mass Flywheels
  7. Clutch Parts
  8. UUC Short Shift Kits
  9. Axle Shafts
  10. Driveshafts
  11. B&M Short Shifters
  12. Performance Short Shift Kits
  13. UUC DSSR - Double Sheer Selector Rod
  14. Drivershaft Center Support Bearings
  15. Flex Discs & Guibos
  16. Transmission Mounts
  17. Transmission Parts
Engine Chips
  1. Performance Flash Software, 2005+ Models
  2. Sprint Booster Drive-by-Wire Module
Engine Parts
  1. Engine Performance Packages
  2. Cam Sprockets & Gears
  3. Water Pumps
  4. Thermostats
  5. Radiators & Cooling System Overhaul Kits
  6. Oil Pan Baffles
  7. Radiator Hoses, Cooling Hoses, & Hose Sets
  8. Underdrive Power Pulleys
  9. Schrick Performance Camshafts
  10. External Engine Parts
  11. Drive Belts & V-Belts
  12. Gaskets, Gasket Sets, Seals, & O-Rings
  13. Factory-Spec Replacement Turbos and Kits
  14. Crankcase Vent, PCV, and Oil Separator Systems
  15. Turbo Upgrades and Kits
  16. Motor Mounts
  17. Electrical Sensors, Switches, & Relays
  18. Ignition Parts
  19. Alternator & Alternator Parts
  20. Starter Motors & Starter Parts
  21. Fuel System Parts
  22. Internal Engine Parts
  23. Cylinder Head Parts & Head Bolts
  24. VANOS Units & Parts
  25. Rod Bearing Kits
  26. Oil Coolers & Oil Cooler Parts
Exhaust
  1. Supersprint Performance Exhaust Systems
  2. Performance Headers & Downpipes
  3. Turner Motorsport Performance Exhaust
  4. Akrapovic Performance Exhaust Systems
  5. Borla Performance Exhaust Systems
  6. Corsa Performance Exhaust Systems
  7. Dinan Free Flow Exhaust Systems
  8. Performance Exhaust Systems
  9. Exhaust System Upgrades
  10. Exhaust Muffler Tips
  11. Oxygen Sensor - O2 Sensors
  12. Exhaust Gaskets Hangers and Parts
Exterior / Body
  1. Black Grills
  2. Chrome Grills & Trim
  3. Emblems & Decals for Hood, Trunk, and Wheels
  4. Painted Reflectors
  5. Front Spoilers, Bumper Covers, & Air Dams
  6. Rear Spoilers, Rear Wings, & Aprons
  7. Body Trim Parts & Accessories
  8. Hood & Trunk Shocks, Struts
  9. License Plate Brackets & License Plate Frames
  10. Mirror Kits & Mirror Parts
  11. Window Regulators & Motors
  12. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  13. Hood Pins and AeroCatch Latches
  14. Racing Tow Hooks and Tow Straps
  15. Aero & Body Kits
Intake
  1. aFe Cold-Air Intake Kits
  2. Turbos & Active Autowerke Superchargers
  3. Dinan Cold Air Intake Kits
  4. Gruppe M Cold-Air Intake Kits
  5. Performance Intake Kits
  6. aFe Performance Air Filters
  7. K&N Performance Air Filters
  8. Intake Cleaning & Recharging Kits
  9. Intake Manifold Upgrades
  10. Intake Manifold Components (DISA, Vacuum, CCV, Etc)
  11. BOV, Chargepipe, and Intercooler Upgrade Kits
  12. Mass Air Sensor & Air Flow Meters
  13. Intake Boots & Hoses
  14. Throttle Body Parts
  15. Other Intake Kits
Interior
  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. Factory Steering Wheels
  7. Racing Steering Wheels
  8. Shift Knobs, Shift Boots, & Shift Handles
  9. Seats & Seat Accessories
  10. Seat Belts and Racing Harnesses
  11. Cup Holders and Storage
  12. Carbon Fiber Interior Parts
  13. Door Sill Strips
  14. Heating & Air Conditioning
  15. Interior Switches and Switchgear
  16. Sunshades & Windscreens
  17. Interior Trim & Accessories
Lighting
  1. Euro Clear Turn Signals, Parking Lights, & Tail Lights
  2. Turn Signals / Parking Lights
  3. Angel Eye Headlight Conversions
  4. Bulbs for Headlights, Turn Signals and Tail Lights
  5. Headlights, Headlight Lenses, & Headlight Parts
  6. Fog Lights, Fog Light Lenses, & Fog Light Parts
  7. Tail Lights
  8. Stealth Bulbs
Maintenance
  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Fuel Filters
  5. Cabin Air Filters, Heppa Filters, & Microfilters
  6. Transmission Filter Kits & Transmission Service Parts
  7. Ignition Coils
  8. Spark Plugs
  9. Bentley Repair / Service Manuals
  10. Service Reset Tools & Fault Code Readers
  11. Anti-Freeze and Coolant
  12. Engine Oils - Genuine BMW and OEM
  13. Power Steering and Hydraulic Fluids
  14. Transmission and Gear Oil - Genuine BMW and OEM
  15. MOTUL Engine Oil and Gear Lubricants
  16. Red Line Oil & Fluids
  17. Liqui-Moly Oil and Additives
Suspension
  1. Shocks & Struts
  2. H&R Performance Springs
  3. Dinan Performance Springs
  4. Spring & Shock Packages
  5. Dinan Coilover Spring Kits
  6. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  7. H&R Coil Over Suspensions
  8. KW Coil Over Suspensions
  9. Moton Coil Overs & Race Shocks
  10. ST Suspension Coilover Kits
  11. Turner Motorsport Racing Suspension Kits
  12. TC Kline Racing Coil Overs
  13. Chassis Reinforcement Kits & Parts
  14. Sway Bar Kits
  15. Sway Bar Links & Sway Bar Parts
  16. Camber / Caster Kits
  17. Strut Braces & Stress Bars
  18. Control Arm Replacements & Upgrades
  19. Suspension Bushings & Mounts
  20. Wheel Bearings & Hub Assemblies
  21. Steering Racks & Power Steering Pumps
  22. Tie Rods & Steering Parts
  23. Coil Over Spring Hardware
  24. CATuned Coilover Kits
  25. Sachs Performance Coil Over Suspension
  26. AST Suspension
Wheels
  1. Apex Flow Formed Alloy Wheels
  2. Forgeline Custom Forged Alloy Wheels
  3. HRE FlowForm Performance Alloy Wheels
  4. Vorsteiner Wheels
  5. Rohana Wheels
  6. D Force Flow Formed Alloy Wheels
  7. Alpina Alloy Wheels
  8. Original BMW Wheels and Wheel Upgrades
  9. Turner Motorsport Wheel Spacers
  10. ECS Tuning Wheel Spacers
  11. H&R Wheel Spacers
  12. Wheel Bolts, Wheel Studs and Nuts
  13. Wheel Emblems, Caps, and Accessories
  14. High Performance Wheels
Tools
  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Clutch Alignment Tools
  5. Coil Over Wrenches
  6. Cooling System Tools
  7. Cylinder Head and VANOS Tools
  8. Exhaust Tools
  9. Fan and Fan Clutch Tools
  10. Fault Code Readers and OBD Scan Tools
  11. Fuel System Tools
  12. Genuine BMW Tool Kits
  13. Oil Service Tools
  14. Sockets
  15. Spark Plug Sockets
  16. Transmission and Differential Tools
  17. Wheel Pin Tools
  18. Workshop Chemicals
Clearance
Choose BMW
BMW 1 Series
  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+
BMW 2 Series
  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+
  3. (F87) M2 2016+
BMW 3 Series
  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+
  18. (F34) 3-Series Gran Turismo 2014+
BMW 4 Series
  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2015+
  3. (F34) 4-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+
  6. (F36) 4-Series Gran Coupe 2015+
BMW 5 Series
  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+
  10. (G30) 5-Series 2017+
BMW 6 Series
  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Coupe 2011+
  6. (F13) 6-Series Convertible 2011+
BMW 7 Series
  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+
BMW 8 Series BMW Classics (E9, Bavaria, Isetta, etc)
  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978
BMW X Series (SAV)
  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+
  12. (F48) X1 2016+
  13. (F48) X1 (2016+)
BMW Z Series
  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003
BMW 1600-2002 / tii BMW i Series
  1. (I01) BMW i3 2014+
  2. (I12) BMW i8 2014+
MINI Cooper and Cooper S
Racing
Racing Home Racing News Racing Schedule Racing Photo Gallery
Gallery
Photo Gallery Wallpaper Project Cars
  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone
Video Gallery
Projects
Turner BMW i8 Turner BMW F80 M3 Turner BMW F82 M4 Turner BMW X5 M Turner BMW F22 2 Series Turner BMW F13 M6 Turner BMW F10 M5 Turner BMW F30 335i Turner BMW E9X M3 Turner BMW E92 335i Turner BMW E82 1 Series Turner BMW ActiveE (100% Electric) Turner BMW E46 M3 Turner BMW E46 330i ZHP Turner BMW E36 M3 Turner BMW E30 M3 Turner MINI Cooper S McLaren F1 Turner BMW E92 M3 Lime Rock Turner BMW F80 M3 Silverstone
About Us
About Turner Motorsport Customer Feedback The Turner Team
  1. Open Positions
Returns Policy Shipping Info Contact Us Privacy Policy Security Policy FAQs

BMW E93 Specials, Deals & Discounts

You're currently viewing parts for your (E93) 3-Series Convertible 2007-2013. Reset your chassis
For accurate results, specify your model below.
Schwaben 17mm Allen Socket - 1/2

Always have the right tools for the job, this 17mm hex head driver is perfect for BMW manual transmission plugs and some axle shafts.

Features:

  •  large ½-inch drive socket 
  • Made of durable chrome vanadium steel

 

 

Schwaben
Part #: HS-1217H55
Price: $9.71 (USD) 
$12.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
ECS Tuning Wheel Spacers - 12.5mm - 72.6mm CB

Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

 

This item fits the following BMWs:

2008-2012 E82 BMW 128i 135 1M
1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Rear Only
2007-2013 E70 BMW X5M
2007-2014 E71 BMW X6 xDrive35i X6 xDrive50i X6M

ECS
Part #: ECS#254KT
Price: $79.95 (USD) 
Ships on Jan 9, 2018
Quantity:   
Schwaben Torx Screwdriver Kit - 6 Pieces

Torx® screwdriver set includes six common bit sizes, perfect for removing door and dashboard panels, interior trim, and smaller underhood components.

Features:

  • Hardened tips have center hole for use with both standard or tamper-proof Torx fasteners 
  • Large grips add comfort and leverage
  • Handle through-holes make them easy to hang from pegboard hooks
  • Entire kit packaged in a convenient molded case.
  • Sizes include: T10, T15, T20, T25, T27, and T30.
Schwaben
Part #: sd-t6pcs
Price: $22.46 (USD) 
$29.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 30mm 12-Point Deep Socket, 1/2

This large socket is the perfect tool for axle nuts when servicing the axle shafts or wheel bearings.

Features:

  • ½-inch drive 30mm 12-point socket
  • 75mm depth  to accommodate many applications and different length shafts
  • Made of durable chrome vanadium steel

 

  • E36 3 series (1992-1999) -- no M3
  • E46 323/325 (1999-2005) -- no 330/M3
Schwaben
Part #: S-1230S
Price: $14.96 (USD) 
$19.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Deep Well Impact Socket - 30mm

This large socket is the perfect tool for axle nuts when servicing the axle shafts or wheel bearings.

Features:

  • ½-inch drive 30mm 12-point socket
  • Specially hardened to take the added abuse from a impact gun
  • Coated for added protection and so you can tell it apart from non impact rated sockets
  • 75mm depth  to accommodate many applications and different length shafts
  • Made of durable chrome moly steel
Schwaben
Part #: 003302SCH01A
Price: $14.96 (USD) 
$19.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 1/4 A convenient ratchet with 1/4" & 3/8" drive options. The perfect ratchet when you're on the go, reducing the amount of tools you need to carry in case of a road side repair.
Schwaben
Part #: P34472-32
Price: $9.71 (USD) 
$12.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Universal Silicone 90 Elbow - 60mm - 2 3/8' ID Black Forge Motorsport universal 90 degree elbow with a 60mm diameter.
Forge
Part #: A90-60B
Price: $26.10 (USD) 
$29.00 (Sale - Save 10%)
Direct Ship
Quantity:   
Hub Centric Ring Adapter Set for E39 Wheels These hubcentric rings are required when fitting E39 wheels to any other BMW 5-lug chassis. The E39 uses a larger center bore on the wheel (74.1mm) but most other BMWs have a 72.5mm lip on the hub. That little difference will cause the wheel to not fully seat itself on the hub, even when fully torqued down. These centering rings fill that gap and allow the wheel to rest properly on the hub. For Genuine BMW E39 wheels only.
ECS
Part #: 747260
Price: $10.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
6MM Silicone Vacuum Hose - Blue - 9 Feet Car suffering from vacuum leaks? This vacuum hose has a 6mm inner diameter. 
Forge
Part #: vc06
Price: $19.76 (USD) 
$21.95 (Sale - Save 10%)
Direct Ship
Quantity:   
3MM Silicone Vacuum Hose - Red - 9 Feet Car suffering from vacuum leaks? This vacuum hose has a 3mm inner diameter. 
Forge
Part #: vc03r
Price: $13.46 (USD) 
$14.95 (Sale - Save 10%)
In Stock
Quantity:   
Schwaben Axle Impact Socket Kit - 6 Pieces

When it comes to the torque found on axle nuts you're already looking at using a breaker bar or impact gun not to mention the corrosion collected over the years. The safest approach is using impact socket, since they are built with the strength needed to avoid breaking under pressure.

Features:

  • Heavy duty ½ inch-drive sockets and drivers have extra thick alloy steel walls, and take a beating that would destroy normal sockets
  •  Durable black oxide coating wipes clean easily and resists rust
  • Contains three 12-point sockets for a sure grip on the most common sized axle nuts, plus three hex drives for removing common hex-head plugs and fasteners
  • Conveniently packaged in a blow molded case, this set will please the most demanding professional technician or discriminating prosumer

Kit includes:

  • 30mm, 32mm, and 36mm - 12-point axle nut sockets - ½" drive

  • 14mm, 17mm, and 19mm hex head drive axle shoulder bolt sockets - ½" drive

Schwaben
Part #: DS-6P
Price: $37.46 (USD) 
$49.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Round Magnetic Parts Tray, 4 3/8

An easy way to hold fasteners without the risk of knocking them over and trying to find them.

 

Schwaben
Part #: PM-110
Price: $7.46 (USD) 
$9.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Black Forge Diverter Valves Kit - N54

Forge Motorsport presents their newest diverter valve, designed specifically BMW's N54 engine. Starting with their own 007P piston-based design, Forge designed an entirely new valve body to retain BMW’s unique connection mechanism.

This diverter valve is fully tunable for both boost-holding capacity and response using Forge's proprietary interchangeable springs and shims - this approach to valve tuning retains optimal piston travel and flow volume, regardless of spring rate. The included flexible and reinforced multi-layer silicone hoses are designed to function with the stock airbox and charge pipes. The hose clamps are designed specifically for silicone hoses, featuring beveled edges and a pressed drive mechanism.

If you are running more than stock boost through your N54, the Forge diverter valve is a necessary mod for your N54.

Forge
Part #: FMDVBM35-B
Price: $291.60 (USD) 
$360.00 (Sale - Save 10%)
In Stock
Free Shipping Free Shipping
Quantity:   
Schwaben BMW 14/17mm Service Wrench

Take one wrench, not two to your next fluid service. The Schwaben Service Wrench fits both crankcase and drain plugs in BMW, Mercedes, and other European vehicles.

Features:

  • Six-point 17mm box end won’t round off engine oil drain plugs
  • Hardened 14mm hex at the opposite end fits many transmission fill and drain plugs
  • Made of vanadium steel with polished chrome finish
  • Long handle for added leverage.

Fits most vehicles with M10, M20, M30, M42, M44, M50, M52, M54, M56, M70, S14, S38, S50, S52 and S70.

Application note: Please verify the exact size of the transmission and differential plugs in your car. BMW has used both 14 and 17mm plugs in some vehicles. 

Schwaben
Part #: ecst007
Price: $22.46 (USD) 
$29.95 (Sale - Save 25%)
Ships on Jan 2, 2018
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Aluminum Coolant Bleeder Screw Replace the flimsy plastic bleeder screw used in the coolant expansion tank or in one of the cooling system hoses with this high quality, durable, aluminum bleeder screw. The stock plastic screw can deform over time due to heat or even regular use. We have even seen the head of the screw snap off, leaving the threaded body stuck in the expansion tank. This aluminum screw will help to prevent sudden failure of the bleeder screw, which can result in immediate overheating of the car.
ECS
Part #: 003530ECS01A
Price: $7.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Black Mechanics Work Gloves - XL

Perfect for any job when it comes to keeping your hands clean and protected.

Features:

  • High dexterity
  • Elastic hook and loop strap
  • Textured latex finger tips for grip
  • Breathable material
Schwaben
Part #: 010337SCH03A
Price: $7.46 (USD) 
$9.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Deluxe Transverse Engine Support Bar

When doing work where the mounts and support need to be removed from the engine or transmission having a engine support bar is wise. By using this engine support the stress is coming off of whatever components are still attached reducing future unnecessary repairs. The safety side of it is having the heavy engine and transmission firmly supported as it should be instead of questionable jack techniques.  

 

Features:

  •  2" longer than most
  • Deluxe transverse support for even more stability
  •  Two angle chain hooks for safer and more stable chain support 
  •  61" long and fully adjustable to any width
  •  Weight rating is a full 1000 lbs.
  •  Includes four rubber padded feet to prevent slipping and damage to cars finish 
  • This tool features a dual hook design for holding engine or transmission in place
  •  Powder coated for long life and durability

Note: It is important that chains are hooked to both sides of hook, like in photo to insure load is supported evenly. 

 

Schwaben
Part #: 009595SCH01A
Price: $217.46 (USD) 
$289.95 (Sale - Save 25%)
In Stock
Quantity:   
Trailer Ramps 7

Is your trailer door ramp too steep to get your car into the trailer, 

Load your vehicle safer and easier with Schwaben trailer ramps. Our trailer ramps create a more gradual angle to prevent spoiler damage when loading and unloading vehicle into or out of trailer.

Features:

  • These ramps work on cars weighing up to 6,000 pounds
  •  Ideal for low ground clearance cars with extra wide tires.
  • Will not scratch or mark your floors!
  • Will not scoot, slip or slide no matter the surface
  • Will not damage trailer door or trailer
  • Light weight at only 15 lbs
  • Highly durable, virtually indestructible, and very stable
  • Ramps have built in straps to allow transport or ability to be hung on the wall
  • 74" long, 14" wide, 7" tall

Note: if your current stock trailer ramps have an additional fold down ramp, we suggest you either fold it up or remove it.

Schwaben
Part #: 006168SCH01A
Price: $279.75 (USD) 
$373.00 (Sale - Save 25%)
In Stock
Quantity:   
Billet Aluminum Oil Filter Housing Cap - N20 N52 N54 N55 S55 BMW uses a lot of plastic in their engine components to save weight and money. Unfortunately, plastic is damaged easily and the factory oil filter cap needs a special tool to remove. This aluminum cap is much more sturdy and features a standard 17mm hex post on the top. 17mm is also the size of your engine oil drain plug, reducing the number of tools that you need to complete an oil change. This cap is designed to use the original o-ring seal so no special parts are required. You only have to remove the original 'filter cage' from the original cap and transfer it to the new aluminum cap. The satin black anodize blends in with the rest of your engine bay making this a smart and subtle upgrade.
ECS
Part #: 003296ECS01
Price: $89.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Locking Service Cart

An important factor when it comes to automotive work other than having the right tool for the job is how to keep those tools organized. The locking Service cart really comes in handy when you need to keep the tools you're using in place, but don't want to leave them out for theft.

 

Features:

  • Thru tray frame construction for stable support
  • 3" deep locking drawer with full extension roller bearing drawer slides
  • Chrome plated 16 gauge box frame and handles
  • 350 lbs load capacity supports heavy tools and equipment
  • Large, easy to maneuver 4" ball bearing swivel casters (2 are locking)
  • Beautiful & durable high gloss black powder coated finish
  • Height  - 35.3"
  • Length  - 30"
  • Depth - 16"
  • Weight  - 64.45lbs
Schwaben
Part #: 006692SCH01A
Price: $134.96 (USD) 
$179.95 (Sale - Save 25%)
In Stock
Quantity:   
Schwaben Exhaust Pipe Hanger removal Pliers

Tired of busting your knuckles from old hardened exhaust hangers?

This Schwaben tool removes the hanger by pressing on the steel hanger bracket and pulling the rubber hanger in one motion. Self centering force pin locks onto the pin while the flat paddle pulls off the rubber hanger from behind. Slim profile and a 25 degree offset works in tight areas.

Schwaben
Part #: 008778SCH01A
Price: $20.21 (USD) 
$26.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
E82/E9X Rear Cool Carbon S/T Performance Brake Pad Set

Cool Carbon S/T brake pads have excellent stopping power and feel with low levels of dust and noise. Engineered for European cars with high speed development on the Autobahn, Cool Carbon is a sporty compound intended for every day use. The S/T compound has more stopping power and initial bite than stock thanks to a higher coefficient of friction and composite materials. We are big fans of these as a sporty street pad and recommend them for medium-aggressive street driving and autocross.

  • High performance for street use
  • Excellent friction/torque at various temperatures
  • Great feel and modulation
  • Low noise
  • Low-medium dust
  • rotor friendly

Cool Carbon pads are sold as a set for each axle (4 pads total).

Cool Carbon Performance
Part #: 7286-D1171
Price: $109.75 (USD) 
$121.95 (Sale - Save 10%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 9 Piece Scraper, Hook And Pick Set

Some of the most popular  uses are carbon cleaning/scraping, picking out o-rings, snap rings and clips.This kit features large and small picks, hooks and a 1" wide scraper. This 9pc set should be part of everyone's tool assortment.

Features:

  •  3" Blade MINI Awl, 90°, Hook, and Curve
  • 6" Blade Awl, 90°, Hook, and Curve
  •  6" x 1" wide scraper
Schwaben
Part #: 008504SCH01A
Price: $16.46 (USD) 
$21.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
E82 135i Front Cool Carbon S/T Performance Brake Pad Set

Cool Carbon S/T brake pads have excellent stopping power and feel with low levels of dust and noise. Engineered for European cars with high speed development on the Autobahn, Cool Carbon is a sporty compound intended for every day use. The S/T compound has more stopping power and initial bite than stock thanks to a higher coefficient of friction and composite materials. We are big fans of these as a sporty street pad and recommend them for medium-aggressive street driving and autocross.

  • High performance for street use
  • Excellent friction/torque at various temperatures
  • Great feel and modulation
  • Low noise
  • Low-medium dust
  • rotor friendly

Cool Carbon pads are sold as a set for each axle (4 pads total).

This item fits the following BMWs:
2008-2013 E82 E88 BMW 135i

Cool Carbon Performance
Part #: 8483-D1371
Price: $130.45 (USD) 
$144.95 (Sale - Save 10%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Mini Tubing Cutter

This great little tubing cutter is a must have in tight work spaces. Large adjusting knob for easier adjustment. This tool only needs 1-1/4" of space around tube.

Features:

  • Handles tubing from 3-16mm (1/8"-5/8") O.D.
  • For copper, aluminum, brass and most thin wall steel.
  • Grooved rollers allow flared tube to be cut directly below the flare.
Schwaben
Part #: 006644SCH01A
Price: $5.21 (USD) 
$6.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Battery Post And Terminal Brush

Battery Terminal brush uses the external brush to clean the cable clamps and the internal brush to clean the battery posts. Made from high Impact plastic body to eliminate tool corrosion.

Keeping the connection clean is an important part of making sure your battery is transferring the proper voltage during startup.

Schwaben
Part #: 006348SCH01A
Price: $3.71 (USD) 
$4.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 40

Having a creeper can make working under the car much easier and more comfortable, roll in and out, padding, and keeping those clothes a bit cleaner. 

 

 Features:

  • Thick fully padded leatherette cover.
  • 40" long with heavy-duty metal support frame.
  • 1"" steel tube frame.
  • Four position adjustable headrest.
  •  Six 2 1/2"oil-resistant rollers.
  • Powder coated frame to resist rusting.
  • Overall dimensions: 17" x 40" X 4"
  • Ground clearance: 1-1/2"
  • Ball bearing swivels on wheels.
  • 250lb capacity.
Schwaben
Part #: 005941SCH01A
Price: $44.96 (USD) 
$59.95 (Sale - Save 25%)
In Stock
Quantity:   
Schwaben 3/8

A professional quality flex ratchet features a fine satin finish designed for durability and easy clean up.

Features:

  • Special designed 72T gear mechanism
  • 5 degree of handle movement between gears 
  • Flex head has 7 detent positions in a 180 degree swing
  • Push button release holds socket tight until you are ready to release
  • Ratchet is a full 290mm ( 11") long for extra leverage.

Limited Lifetime Warranty

Schwaben
Part #: 005981SCH01A
Price: $22.46 (USD) 
$29.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Trim/Moulding Tool Kit - 5 Pieces

Plastic five-piece tool kit removes trim and door panels, moldings, and adhesive backed logos and badges, without damage. By using a non-marring plastic you can safely and easily remove trip pieces with confidence

 

Features:

  • Pull-type remover

  • Narrow edge remover

  • Wide edge remover

  • Handle remover

  • Upholstery clip remover

Schwaben
Part #: PHR-05s
Price: $11.21 (USD) 
$14.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
aFe Pro5R Air Filter - E82 135i, E9X 335i/335xi, E60 535i/535xi, E89 Z4 35i/35is Drop-in aFe high performance air that is made for the stock/factory BMW airbox on all the 2007-2010 (and others) BMW twin-turbo engines, including the E82/E88 135i, the E90/E92/E93 335i & 335xi, E60 535i & 535xi, and E89 Z4 35i/35is filter. This is designed to be the last air filter your BMW needs, as it is completely washable/reusable, and flows better than the stock paper air filters. On your BMW's twin turbo 3.0 liter engine, aspiration a BIG factor in producing power -- the better the airflow, the higher the potential power. Replacing your stock paper filter with an AFE high performance cloth/gauze filter takes only minutes and instantly reduces air restriction, for more horsepower and torque.

This AFE stock-replacement air filter element fits the following BMWs:
2008-2010 E82 E88 1 Series 135i 1M
2007-2011 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 335i - Convertible
2007-2010 E60 5 Series 535i 535xi sedan
2009+ Z4 BMW Z4 sDrive35i Z4 sDrive35is

This version used aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
AFE
Part #: 30-10156
Price: $88.16 (USD) 
$97.95 (Sale - Save 10%)
Direct Ship
Free Shipping Free Shipping
Quantity:   
aFe ProDry S Air Filter - E82 135i, E9X 335i/335xi, E60 535i/535xi, E89 Z4 35i/35is This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. The ProDry S filter uses an oil-free fabric filter material that flows better than a stock paper filter and requires almost no maintenance. The synthetic filter does not require oil like the blue Pro5R filter, making maintenance a breeze.

This AFE stock-replacement air filter element fits the following BMWs:
2008-2010 E82 E88 1 Series 135i 1M
2007-2011 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 335i - Convertible
2007-2010 E60 5 Series 535i 535xi sedan
2009+ Z4 BMW Z4 sDrive35i Z4 sDrive35is

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.
AFE
Part #: 31-10156
Price: $89.10 (USD) 
$99.00 (Sale - Save 10%)
In Stock
Free Shipping Free Shipping
Quantity:   
Schwaben 46 Piece 1/4

The perfect kit containing most of your needed European essentials. 

Features:

  • 13PCS-1/4" DR.6PT SOCKETS: 4, 4.5 , 5 ,5.5 ,6 , 7, 8 ,9 ,10, 11, 12, 13, 14MM 
  • 1PC- 1/4" DR. QUICK RELEASE RATCHET (72T).
  • 2PC- 1/4" DR.50 & 100MM EXTENSIONS 
  • 1PC- 1/4" DR.150MM FLEXIBLE EXTENSION
  • 1PC- 1/4" DR.UNIVERSAL JOINT
  • 1PC- 1/4" DR.SLIDING T-BAR
  • 1PC- 1/4" DR.6" SPINNER HANDLE
  • 1PC- 1/4" DR.1/4" BIT HOLDER ADAPTER
  • 4PCS-HEX KEY WRENCHES:1.27, 1.5,2,2.5MM
  • 6PCS-1/4" HEX SOCKETS:3,4,5,6,7,8MM
  • 3PCS-1/4' SLOTTED SOCKETS:4,5.5,7MM
  • 3PCS-1/4" PHILIPS SOCKETS:PH1, PH2, PH3
  • 3PCS-1/4"POZI SOCKETS: PZ1, PZ2, PZ3
  • 6PCS-1/4" TORX SOCKETS: T10, T15, T20, T25, T30, T40

Own an E30? This tool kit is a perfect fit for your glovebox!

Schwaben
Part #: 010747SCH01A
Price: $37.46 (USD) 
$49.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 6.5 Liter Fluid Extractor

6.5 Liter Extractor system is hand -operated for fast extraction of any type of fluid. Two different diameter extracting tubes are included to suit your particular application. Unit has a vacuum release button for quick and easy release. 

Features:

  • Flip out foot for stability whils using the extractor
  • Built in hose storage
  • 41" Main tube 3/8" OD
  • Two 35" extension tubes 1/4" and 3/16" OD ( couples to main tube).
Schwaben
Part #: 011885SCH01A
Price: $59.96 (USD) 
$79.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 6

The Schwaben Pistol Grip Locking Pliers, a unique pistol style that is ideal in locations that do not allow the use of regular locking pliers.

Features:

  • The hammer-like lock release is easily pressed in tight locations giving maximum usability to the user
  • Durable, rubberized grip covers provide a comfortable, non-slip grip to ensure your hands have a solid hold at all times
  • Quickly and easily adjust the gate of the jaws for a secure clamp with the easy to use barrel adjuster
Schwaben
Part #: 014565SCH01A
Price: $26.21 (USD) 
$34.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Cooling System Pressure Tester Kit

Are you refreshing your coolant system or having issues with coolant loss? An easy way to test your system for leaks and ensure you're able to maintain pressure without coolant loss is the Schwaben Cooling System Pressure Tester Kit. This kit has everything you need to attach and test your system: a hand operated pressure pump with an attached pressure gauge to carefully and accurately monitor the system's pressure, an attached 24" flex hose that connects with quick-couplers and adapters that tightly seal to prevent air pressure from escaping, 8 color-coded screw on radiator adapters and 4 twist on radiator caps, a temperature gauge, all needed instructions, and a sturdy blow-molded case to protect all components from damage.

This kit includes the following:

  • Hand operated pressure pump with a 0-35 psi gauge.
  • Long 24" flex hose between pump and quick coupler for adapters.
  • 12 high quality adapters for radiator
  • Temperature gauge
  • Instruction Manual
  • Blow molded case
Schwaben
Part #: 014710SCH01A
Price: $97.46 (USD) 
$129.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
E9X 328i/xi N51 07-12 Stage 1 Turner Motorsport Performance Package

2007-2012 E90/E92 328i SULEV Stage 1 Performance Package
Peak Power Gain: +19hp / +17ft-lbs
Rev limit: 7000
Octane: 91 or higher

Our Stage 1 kit featuring a cold-air intake kit and matching performance software. The aFe intake is a cone filter with a heat-blocking shield around it. The larger surface area of the filter, combined with the heat shield, allow more cool air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with heat shield, intake tube, sealing materials, hardware, and install instructions.

Our software fully maximizes the SULEV N51 engine in the 328i. Our software has been carefully developed on the dyno and the road to provide optimal power and torque gains at all RPM. We change the fuel, Valvetronic, and VANOS maps as well as revise the factory torque limiters. We have paid particular attention to increasing low and mid-range torque. The stock BMW software is hampered by settings for 87 octane fuel. By re-mapping the engine programming for 91 octane, we can make more power, torque, and improve fuel mileage - all without harm to the engine or affecting driveability. The throttle response is also improved (quicker) eliminating unwanted and dangerous flat spots in the pedal response.

There are two ways to install our software: mailing the ECU to us for a reflash or do-it-yourself install with our Turner Flash tool:

Mail-In Reflash - lower upfront cost but additional shipping charges. Minimum downtime of at least three days. We have a 24 hour turnaround on shipping the ECU back to you but factor in transit time. Expert installation of your software at our facility.
Turner Flash DIY tool - higher upfront cost but files are emailed back and forth. No downtime - you can still drive the car while we process your tune. Files are emailed back and forth - your stock file comes to us, a tuned file is returned to you. Easy install via Windows laptop. 

This package covers BMW's N51 SULEV model - Super Ultra Low Emissions Vehicle specification. The N51 engine was installed in the 328i model in certain parts of the country to help with emissions certification (California, the Northwest, and the Northeast). Most customers did not have choice in which engine was installed. We will verify that you get the correct software by checking the VIN at the time of your order.

E90/E92/E93 328i N51 Stage 1 Engine Upgrade includes:
aFe Cold Air Intake (filter, heat shield, intake tube)
Turner Motorsport Performance Software Flash

This item fits the following SULEV BMWs:
2007-2011 E90 BMW 328i 328xi 328i xDrive - Sedan
2007-2012 E92 BMW 328i 328xi 328i xDrive - Coupe
2007-2012 E93 BMW 328i - Convertible

Turner Motorsport
Part #: E9XN51-ST1
Price: $795.60 (USD) 
Direct Ship
Free Shipping Free Shipping
HARD Motorsport Oil Cooler Kit BMW E9X 335i 07-10

Keeping your N54 cool on the track is important to prevent serious engine damage. They tend to run on the hot side and the stock oil cooler isn't enough to prevent potentially dangerous oil temps. Hard Motorsports offers this additional Oil Cooler Kit to help eliminate the build up of heat, keeping your engine oil in a much safer temperature range. Oil that is too hot can lead to increased wear, warping of internal parts, and complete engine failure.

Can be installed in conjunction with factory oil cooler for supplemental cooling. 

 

Fits the following vehicles:

E9X BMW 335i w/ N54 3.0L

HARD Motorsport
Part #: OILCOOLR.E9X
Price: $449.10 (USD) 
$499.00 (Sale - Save 10%)
Direct Ship
Free Shipping Free Shipping
Quantity:   
Liqui Moly Radiator Cleaner - 300mL

Deposits in the radiator can lead to inefficient cooling or improper temperature readings. Long term exposure to high temperatures can cause internal engine components to warp or become damaged without proper cooling. This Liqui-Moly Radiator Cleaner reliably removes these deposits without adversely affecting the rest of the cooling system, allowing the cooling system to run efficiently, cooling the engine to proper operating temperatures. 

This does not contain any acids or alkali's and is acid neutralizing.

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Liqui-Moly
Part #: 2051
Price: $6.26 (USD) 
$6.95 (Sale - Save 10%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben BMW Belt Tensioner Tool - N54/N55

Featuring a T60 Torx head, the belt tensioner found on the N54/N55 engine has exceptionally tight quarters. Use of this tool will allow access to the lock pin hole without excessive component removal, making belt removal and installation a much easier task.

This tool fits all N54/N55 powered BMW, including: 
2008+ E82 BMW 135i 1M Coupe 
2014+ F22 BMW M235i 
2006+ E90 BMW 335i 335xi 335i xDrive - Sedan 
2007+ E92 BMW 335i 335is 335xi 335i xDrive - Coupe 
2007+ E93 BMW 335i - Convertible 
2012+ F30 BMW 335i 335i xDrive - Sedan 
2013+ F32 BMW 435i 435i xDrive - Coupe 
2014+ F34 BMW 335i xDrive GT - Gran Tourismo 
2015+ F80 BMW M3 - Sedan 
2015+ F82 BMW M4 - Coupe 
2015+ F83 BMW M4 - Convertible 
2006-2010 E60 BMW 535i 535xi 535i xDrive 
2010+ F07 BMW 535i GT, 535i xDrive GT 
2011+ F10 BMW 535i 535i xDrive 
2012+ F13 BMW 640i 
2009+ F01 BMW 740i 740li 
2011+ F25 BMW X3 xDrive35i 
2007-2013 E70 BMW X5 xDrive35i 
2007-2014 E71 BMW X6 xDrive35i 
2009+ Z4 BMW Z4 sDrive35i Z4 sDrive35is 

Schwaben
Part #: 020023SCH01A
Price: $31.46 (USD) 
$41.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Front Upper and Lower Control Arm Monoball Upgrade - Left And Right - E82, E89, E9X (Including M Models)

M3 upper and lower control arms are a known upgrade for non-M E82 and E9X chassis. But our Monoball Thurst Arms are even more of an upgrade over the stock M3 arms. This package bundles the Turner Monoball upper thrust arms with the stock M3 lower control arms. If there's one big fail point in the E82/E9X front suspension it's the thrust arms. The front inner thrust arm bushing is filled with dampening fluid that leaks over time. Once it's gone the bushing has the strength of a rubber band. Even though we sell two types of upgraded rubber bushings there was still room for improvement. For someone looking for superior performance and longevity these sealed monoball bushings are the best out there. 

The advantage of a monoball bearing is that it will not deflect under load. All of the rubber bushings, including the M3, move in all sorts of directions and that changes your alignment, especially when used with big brake kits or when driven hard. And when worn out, performance suffers. Our monoball sits in a CNC machined aluminum housing which has zero deflection. The monoball allows complete freedom of movement but only at the desired angles. What you get is superior steering precision, better handling from more consistent alignment, and almost infinite bushing life. And thanks to the inner liner and sealed rubber boots there's none of the extra noise or reduced service life of fully solid race bushings.

The lower M3 control arm bushings use a similar sealed monoball bushing instead of rubber. This package gives you monoball precision and performance with OE-quality components.

This item fits the following BMWs: 
2008-2012 E82 BMW 128i 135i 1M Coupe 
2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan 
2006-2012 E91 BMW 328i - Wagon 
2007-2013 E92 BMW 328i 335i 335is M3 - Coupe 
2007-2013 E93 BMW 328i 335i M3 - Convertible 
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is 

Turner Motorsport
Part #: e9x0031313tKT
Price: $689.00 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Schwaben
Part #: 007237sch01aktKT
Price: $44.96 (USD) 
$59.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
E82 135i, E9X 335i Supersprint Turbo Cat-Less Downpipes

Special pricing! Free ground shipping! This turbo down pipe for the 135i and 335i is manufactured from 304 stainless steel using all mandrel bent tubing and each pipe is 65mm in diameter resulting in ultra low backpressure, assuring instant turbo spool up for maximum torques and horsepower gains for your 135i or 335i. The results of installing a complete turbo to tail pipe Supersprint system are a phenomenal 26 hp with a torque gain over 20 lb/ft.

The stock down pipes cause a major restriction in the exhaust flow. BMW's solution to deal with the limited space in the engine compartment is to crush the turbo outlet tubes to reduce the size of the tubing. Doing this created undesirable backpressure. For emission purposes the factory also incorporated built-in pre-cats directly after the turbo outlet ports. This make the exhaust gas backpressure rise to extremely high levels at all rpm and engine loads. This design retains excessive heat in the engine and affects performance in a negative way. The design of the Supersprint down pipes takes advantage of even the smallest space available and frees the exhaust gas flow dramatically. The SS pipe cross section (no crushed pipe) remains constant all along the down pipes and the pre-cats are totally eliminated.

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

Pick up a Cobb AccessPort programmer to go along with these downpipes. Additional tunes are available that will get the most out of this upgrade. Not only will the Cobb AP increase horsepower and torque but special programming is available to keep fault codes, check engine lights, and limp mode from disrupting your day. It has other features too such as data logging and diagnostic fault code reading and clearing. The Cobb AP is the most sophisticated programming tool available for the 135/335 and no tuning plan should be without one.

 

section:downpipe

connects to:stock turbo outlet, Supersprint or any other section 1

material:T304 stainless steel

 

This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.


This item fits the following BMWs:
2008-2012 E82 BMW 135i 1M Coupe
2007-2011 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2013 E92 BMW 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2013 E93 BMW 335i - Convertible
Left Hand Drive ONLY

Supersprint
Part #: 980211KT
Price: $1521.71 (USD) 
$2028.95 (Sale - Save 25%)
Ships on Jan 11, 2018
Free Shipping Free Shipping
Quantity:   
HARD Motorsport AC Delete -- E9X 335i w/ N54

By eliminating your A/C compressor, you can free up a bit of additional power. HARD Motorsport's A/C Delete comes with a new pulley and belt for your N54 engine to round this job out as smoothly as possible.

 

Fits the Following vehicles:

2007-2001 E9X BMW 335i/is/xi

HARD Motorsport
Part #: ACDELETE.E90
Price: $80.99 (USD) 
$89.99 (Sale - Save 10%)
Direct Ship
Free Shipping Free Shipping
Quantity:   
Magnum Force Stage 2 Pro AFe Intake Kit - E9X 325i/328i/330i

This intake kit replaces the top-half of both your factory air boxes. It features two 3-angle aluminum velocity stack adapters, 1.6mm powder-coated steel heat shields, trim sealed to seal out hot engine air, two custom aFe brand cotton filters, all hardware, and installation instructions.

For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

By removing your stock intake air box, you are removing the most restrictive portion of your engine's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.


This aFe intake fits the following BMWs:
2008+ E82 BMW 128i
2006+ E90 3 series: 325i Sedan, 328i Sedan, 330i Sedan, 325xi Sedan, 328Xi Sedan. 328i xDrive Sedan, 330xi Sedan
2006+ E92 3 series: 328i Coupe, 328Xi Coupe, 328i xDrive Coupe
2006+ E93 3 series: 328i Convertible


Clickhere for installation instructions.

AFE
Part #: 51-11012X
Price: $420.26 (USD) 
$466.95 (Sale - Save 10%)
Direct Ship
Free Shipping Free Shipping
Performance Brake Caliper Guide Bushing Installation Tool Set

Installs bushings straight and true with minimal effort. Includes tools for both iron and aluminum calipers. Purchase only one tool set for your entire caliper guide bushing upgrade - tools are not one time use.

 

ECS
Part #: 003326ECS03
Price: $19.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Dynamic Air Scoops - Orange Direct more fresh cool air from your BMW's center/nose grills to your intake, with the aFe D.A.S. (Dynamic Air Scoops). These two "scoops" install behind your front grills to direct more airflow into the factory intake snorkel used on the 328i, 328xi, 335i & 335xi, and 2008+ E90/E92 M3. Scoops are a direct bolt-in install, and include installation instructions and required hardware for a simple install. When combined with a higher flowing filter, such as the aFe stock replacement filter or twin filter system (335i & 335xi), these scoops help get the maximum benefit of a higher efficiency filter by providing more cool, fresh outside air directly into the intake snorkel. Both the 3.0 twin turbo models and the 4.0 V8 models especially need this added air flow for best horsepower and torque.

These aFe Intake Scoops fit the following BMWs:
2007-2011  E90/E92/E93  BMW 328i & 328xi (coupe, sedan & convertible)
2007-2010  E90/E92/E93  BMW 335i & 335xi (coupe, sedan & convertible)(N54 engine only)
2008-2011  E90/E92/E93  BMW M3 (coupe, sedan & convertible)
AFE
Part #: 54-11478-N
Price: $107.10 (USD) 
$119.00 (Sale - Save 10%)
Direct Ship
Quantity:   
E9X M3 6MT Differential Upgrade - Custom Options


A custom differential is one of the best upgrades to have done to your E90 or E92 M3. Not only can you get more performance but you can also address the weak points in the M Variable limited slip diff. It's easy to forget about the rear axle when you're considering performance upgrades but changing the gearing is in the top 3 things to do to make the car faster. A custom diff is also a rebuilt unit with new seals, bearings, and limited slip unit.

Gearing The E9X M3 gearing depends on which transmission/clutch spec your car has - 6MT or the DCT. The manual transmission cars have a relatively short 3.85 gear ratio on manual transmission cars. They could use a shorter gear because the engine redline is so high - the car has a long power band and the gear spacing allows you to stay well within that range. But there's always more acceleration to be had with a shorter gear set and we have quite a few to choose from for either transmission. Your speed vs RPM obviously changes with a different gear set. Use the chart below for examples of the differences.



2009 M3, 6-speed manual, 265/35-19" rear tires

(click to expand)

Gear RatioGearSpeedRPM

4th Gear @ 40 MPH

3.854th40 MPH2,350 RPM

4.104th40 MPH2,500 RPM

4.454th40 MPH2,700 RPM

70 MPH Cruise

3.856th70 MPH3,000 RPM

4.106th71 MPH3,250 RPM

4.456th71 MPH3,500 RPM

5th Gear Speed at Redline

3.855th168 MPH8,250 RPM

4.105th157 MPH8,250 RPM

4.455th145 MPH8,250 RPM

Why 5th? Because 6th does not have the mechanical advantage to get past wind resistance at these speeds - it is more of a cruise/overdrive gear. Using 5th for comparison purposes is much more relevant than having to take into account wind direction, resistance, grade, elevation, tire sizing, etc. These numbers are for comparisons among gear ratios only, not to determine what your M3 will top out at.
Limited Slip Options The M3's M Variable locking differential is genius when it's working properly. Unfortunately, as many M3 owners have come to find, the system only has a service life of 80,000 miles (sometimes less) and then the viscous unit inside starts to fail (is your's clunking?). We can rebuild the internals and bring it back to a perfectly-functioning viscous M Variable unit. Or you may choose to lose the variable lock in favor of a traditional clutch-type or helical diff with a set locking. We also build diffs with Quiafe, Kaaz, and OS Giken (favorite of the Turner racing team) limited slip units.

Core Charge. If we are building a diff from our own stock a refundable core charge will apply until we get your original diff back. You have a maximum of 30 days from the time you receive the diff to send it back us for a refund. Click here for more detail and explanation of the core charge.

*For full core deposit return, factory diff with 3.85 gearing must be sent in*

FAQ: For a full FAQ on the custom diff process, click here.

This item fits the following BMWs:
2008-2011 E90 BMW M3 6MT - Sedan
2008-2013 E92 BMW M3 6MT - Coupe
2008-2013 E93 BMW M3 6MT - Convertible

Turner Motorsport
Part #: TMS20540
Price: $2924.00 (USD) 
Direct Ship
Free Shipping Free Shipping
E9X M3 Replica Front Spoiler / Bumper Cover - E9X M3 Damaged your M3's front spoiler? This high quality replica is a direct replacement for the factort E9X M3 front spoilerfor a fraction of what the original M3 spoiler would cost. It also includes the mesh center grill. Available for cars with and without PDC (park distance control). Comes ready to paint and install. Professional paint and installation is always recommended.

Because of size and dimensions of this front bumper, it can not be shipped via conventional carriers such as UPS or FedEx, and must be shipped via Truck Frieght shipping. Please call or email, and we can get you a a quote for freight.

This M3-style front bumper / front spoiler fits the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible
Not for cars with Headlight Washers
Turner Motorsport
Part #: E9XM3FTREP
Price: $409.95 (USD) 
Back Ordered
E9X M3 DCT Differential Upgrade - Custom Options


A custom differential is one of the best upgrades to have done to your E90 or E92 M3. Not only can you get more performance but you can also address the weak points in the M Variable limited slip diff. It's easy to forget about the rear axle when you're considering performance upgrades but changing the gearing is in the top 3 things to do to make the car faster. A custom diff is also a rebuilt unit with new seals, bearings, and limited slip unit.

Gearing The E9X M3 gearing depends on which transmission/clutch spec your car has - 6MT or the DCT. The DCT comes with a taller 3.15 gear set (taller than the 3.85 used in the manual transmission cars) to make up for the different transmission ratios and the additional 7th gear. But there's always more acceleration to be had with a shorter gear set and we have quite a few to choose from for either transmission. Your speed vs RPM obviously changes with a different gear set. Use the chart below for examples of the differences.



2009 M3, 7-speed DCT, 265/35-19" rear tires

(click to expand)

Gear RatioGearSpeedRPM

4th Gear @ 40 MPH

3.154th41 MPH2,750 RPM

3.624th39 MPH3,000 RPM

70 MPH Cruise

3.157th70 MPH2,800 RPM

3.627th70 MPH3,250 RPM

6th Gear Speed at Redline

3.156th171 MPH8,250 RPM

3.626th149 MPH8,250 RPM

Why 6th? Because 7th does not have the mechanical advantage to get past wind resistance at these speeds - it is more of a cruise/overdrive gear. Using 6th for comparison purposes is much more relevant than having to take into account wind direction, resistance, grade, elevation, tire sizing, etc. These numbers are for comparisons among gear ratios only, not to determine what your M3 will top out at.
Limited Slip Options The M3's M Variable locking differential is genius when it's working properly. Unfortunately, as many M3 owners have come to find, the system only has a service life of 80,000 miles (sometimes less) and then the viscous unit inside starts to fail (is your's clunking?). We can rebuild the internals and bring it back to a perfectly-functioning viscous M Variable unit. Or you may choose to lose the variable lock in favor of a traditional clutch-type or helical diff with a set locking. We also build diffs with Quiafe, Kaaz, and OS Giken (favorite of the Turner racing team) limited slip units.

Core Charge. If we are building a diff from our own stock a refundable core charge will apply until we get your original diff back. You have a maximum of 30 days from the time you receive the diff to send it back us for a refund. Click here for more detail and explanation of the core charge.

*For full core deposit return, factory diff with 3.15 gearing must be sent in*

FAQ: For a full FAQ on the custom diff process, click here.

This item fits the following BMWs:
2008-2011 E90 BMW M3 DCT - Sedan
2008-2013 E92 BMW M3 DCT - Coupe
2008-2013 E93 BMW M3 DCT - Convertible

Turner Motorsport
Part #: TMS213596
Price: $2924.00 (USD) 
Direct Ship
Free Shipping Free Shipping
Turner BMW 5mm Wheel Spacers (Pair) - Most BMWs (see applications)

5MM (.20 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4

Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems --

  • Correct wheel offset issues
  • Achieve a flush fitment instead of the "tucked under" look
  • Clearance the wheel from contact with other components (suspension, brakes, etc).
  • Improve handling and stability by increasing track width

A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required.

These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is light weight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market!

Turner Wheel Spacer Features --
+ hub-centric design, 1-piece spacer
+ precise tolerance fitment thanks to CAD process and CNC mill machine
+ aerospace grade aluminum  light weight but very strong with a high resistance to corrosion
+ additional military-spec hardcoat for further corrosion resistance
+ innovative Quick Release pockets for easy removal (better than a chamfered back edge)
+ laser engraved size and part number for easy identification
+ stealthy anthracite or black color
+ extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available)
+ Turner Motorsport track and street tested!
+ Made in the USA

Extended Wheel Bolts
Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing.

Spacer Specs:
(click to expand)
Spacer Specs:
bolt pattern:5 x 120
center bore:72.6mm
hubcentric?yes
wheel pad size:normal

Fitment Notes:
(click to expand)
5mm spacer note: a 5mm spacer sits on the existing hub lip but leaves less than 5mm of lip for the wheel to rest on. Therefore, wheels that have a bevel around the center bore will not engage the hub lip and may reseult in a vibration.

Year & Model Applications
(click to expand)
2008-2012 E82 BMW 128i 135 1M
1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Turner Motorsport
Part #: TWH9905005
Price: $79.95 (USD) 
Back Ordered
Free Shipping Free Shipping
on orders $199 and up
Turner Stage 2 Race Software for E9X M3


RACE SOFTWARE TO BE USED WITH FRONT CAT DELETE
Max HP gain = 17 hp
Max Trq gain = 19 ft-lbs
Rev Limit = up to 8600 RPM

Our Race software was co-developed along with our cat-delete Test Pipes and our IMSA E92 M3 racecars. Dyno-tuned and race-proven, this software will get the most from a cat delete upgrade on the E9X M3. The combination of the software and Test Pipes produces over 40whp and 30wft-lbs with no other modifications - a massive gain on an already impressive engine.

Our Race software has been fine-tuned over the years beginning with our IMSA/CTSCC E92 M3 racecars (2011 GS class champions). We modify over 40 different maps in the ECU for such things as fuel and timing maps at part throttle and full throttle, revised torque settings, knock control, VANOS and cam timing, pedal input, top speed limiter, and rev limiters. Additional tuning has been done for the cat delete - prevent limp mode and check engine lights, fault codes for cat delete, and turning off the secondary air pump. Turning off the secondary air pump also disables the cold start sequence so your idle and warm-up will be smoother and quieter. A built-in cold start rev limiter safeguards the engine internals until the oil warms up. Not only is there a lot more power at all RPM but the engine is more responsive and smoother!

The Race software is only for cars with the primary cats removed via Test Pipes or similar race exhaust. We developed this along with our own Test Pipes but the software can also be used with other brands of cat-delete pipes too. In addition to our own exhaust, we have used our software with the Akrapovic Evolution exhaust, Supersprint cat-delete and sport cats, aFe race center pipes, Borla Test Pipes, and others. If you have other modifications done to your M3, we can supply you with specially-developed software to maximize the gains from those upgrades. Click on the blue banners below to see more detailed information on the software options we offer. Select all those that apply in the menu below.

Turner Motorsport has been developing software on the S65 since our first car in 2008. Since then we have done software projects for street, track, full-race, stroker, and supercharged engine builds using the stock MSS60 DME or a stand-alone Bosch or Motec system. Engine tunes have been developed and checked on our Dynapack chassis dyno and further refined with real world testing. Our Race software is based on the tuning we did for the CTSCC racing series, which we won the championship in 2011. For track cars, our Stage 2 cat-delete software will clear check engine lights and faults related to cat and air pump delete (to satisfy race series regulations).

Our software is installed via the Turner flashing OBD tool. This tool plugs into the OBD socket in the dash and the performance software is installed from a laptop computer connected to the tool. It also works as a fault code scanner to read and reset diagnostic trouble codes and reset adaptations. The software program requires a Windows XP/Vista/7/8/10 laptop and the installation and setup are very easy (click here for instructions). The OBD tool, cable, and files are shipped to you with simple setup instructions. There is no need to remove your ECU and ship it. You can have your M3 flashed in under an hour from the convenience of your garage or driveway!

E9X M3 Stage 2 Power Gains:

SpecPower Gain (Engine)Torque Gain (Engine)

Software upgrade alone+17hp+19ft-lbs

Software and Test Pipes+48hp+33ft-lbs


Stage 2 Race Software Options:

Minimum Octane

(click to expand)

You can choose between 91 or 93. We have developed tuning for the standard 'high octane' premium fuel found around the country (91 is the maximum available in some areas). Our power and torque gains are advertised with 91. If using 93 we can alter the knock sensor logic to extract more power with the higher grade fuel. Additional race fuel maps are also available, contact us for details.

Rev Limit

(click to expand)

On 6-speed manual cars we can set a higher engine rev limit. 8,300 is stock; 8,400 is what was used on the GTS model in Europe; 8,600 is the safest raised rev limit that we have used in our race cars. To make things simple we offer it as either stock 8,300 or raised to 8,600. On DCT cars the higher rev limits are for M shift modes only (manual/paddle shift). The higher revs do not work in full auto D modes. Work is continuing on higher limits for D mode.

Launch Control

(click to expand)

Our software can also enable a Launch Control feature. To use it, activate M Dynamic Mode, engage first gear, hold the throttle to the floor (it will only rev to 3,500 RPM), and dump the clutch. Keep your foot to the floor and hang on! You don't have to modulate the clutch and throttle - the engine and DSC modules will handle the launch. We experimented with different launch points and found that 3,500 RPM offers a great combination of tire hook-up and torque output. This is available on manual transmission cars only (DCT has their own built-in launch control).

Disbale Cold Start

(click to expand)

This feature is for off-road/track driven cars only. Under the original setup, a secondary air pump will turn on when the engine is started. This is to add fresh air to mix with the rich fuel mixture and heat the catalytic converters faster (rich mixtures are bad for the cats). The air pump stops running when the engine gets to a specified temp and the fuel mixture leans out. Unfortunately, the air pump system raises the idle and produces a very harsh and loud tone to the exhaust. The sound is worse when the catalytic converters are removed (such as on a track or race car) because the exhaust is more open. We will disable the air pump system so it does not activate when the engine is started. You get a super smooth and quiet startup that is a night and day difference compared to the original. This feature should only be used on cars that have had cats removed because the rich fuel mixture at startup will degrade the catalytic converters much quicker.

M Dynamic Mode Steering

(click to expand)

We can set the M Dynamic Mode (MDM) steering effort as the standard steering. The MDM steering is heavier and requires more effort when driving at higher speeds. Some owners feel that the standard steering is too light and over-boosted and the MDM steering is a nice change. This does not affect the steering effort, or the other features, of MDM.

240E Update

(click to expand)

Our performance and race software is built around a specific version of stock BMW software (version 240E). It was released towards the end of M3 production and includes a number of significant changes over older versions for drivability and torque managment. 240E was such a big step forward that it's considered an upgrade all on its own. No worry if you don't have 240E - we will provide you with a free update before the Turner performance software is installed.

In 2015 BMW released a 241E update. There are minor changes to the software code but the tuning maps and data are all the same as the 240E version so there is no need to update to 241E. If the dealer offers it we recommend that you decline. If you're already on 240E there is no reason to switch to 241E (the tuning maps are the same).

 


Video:

 

 

click for high quality

 

This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.


This performance engine software (reflash) is for the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible

Turner Motorsport
Part #: TMS1979
Price: $999.00 (USD) 
Available
Turner Motorsport Z4 Racecar T-Shirt - Black Welcome to 2014! Introducing our new Z4 GTD race car. The brand new Turner Motorsport BMW Z4 GTD competing in the TUDOR United SportsCar Championship comes to life on high quality 100% cotton black t-shirt. The shirt features some impressive illustrations of both the front and rear of the extremely wide and curvy Z4. The graphics pop off the shirt transitioning from a subtle gray scale to the Turner blue and yellow.

Get yours today, these are limited in quantity and won't last long. Choose size below.
Turner Motorsport
Part #: G200-BK
Price: $24.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Turner Motorsport Brake Bleeder Bottle The Turner Motorsport Brake Bleeder Bottle is the perfect companion when bleeding your brakes! The bottle features a nice long flexible hose so fitment over the bleeder nipple is a snap. These bottles also offer either a magnetic mount or a cable lanyard, so you can hang the bottle or stick it to the brake rotor, this leaves your hands-free to work with your tools. It works great with our Power Brake Bleeder
Turner Motorsport
Part #: TMS1196
Price: $12.25 (USD) 
$16.49 (Sale - Save 26%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Turner Performance Software for E9X 328i

MORE POWER, BETTER DRIVEABILITY!
Max HP gain = 19 hp
Max Trq gain = 19 ft-lbs
Rev Limit = 7000 RPM

Our software fully maximizes the 'high-output' N52B30M1 engine in the 328i. Our software has been carefully developed on the dyno and the road to provide optimal power and torque gains at all RPM. We change the fuel, Valvetronic, and VANOS maps as well as revise the factory torque limiters. We have paid particular attention to increasing low and mid-range torque. The stock BMW software is hampered by settings for 87 octane fuel. By re-mapping the engine programming for 91 octane, we can make more power, torque, and improve fuel mileage - all without harm to the engine or affecting driveability. The throttle response is also improved (quicker) eliminating unwanted and dangerous flat spots in the pedal response.

There are two ways to install our software: mailing the ECU to us for a reflash or do-it-yourself install with our Turner Flash tool:

Mail-In Reflash - lower upfront cost but additional shipping charges. Minimum downtime of at least three days. We have a 24 hour turnaround on shipping the ECU back to you but factor in transit time. Expert installation of your software at our facility.
Turner Flash DIY tool - higher upfront cost but files are emailed back and forth. No downtime - you can still drive the car while we process your tune. Files are emailed back and forth - your stock file comes to us, a tuned file is returned to you. Easy install via Windows laptop using these instructions (click here).

Should you choose to mail your ECU to us, follow these specific instructions on shipping the computer (click here). We will provide you a free Next Day Air shipping label to get your ECU to us quickly - and returned just as fast. We will contact you to arrange a time to ship in your ECU to further minimize downtime.

This item fits the following BMWs:
2007-2011 E90 BMW 328i 328xi - Sedan
2007-2011 E91 BMW 328i 328xi - Touring Wagon
2007-2013 E92 BMW 328i 328xi - Coupe
2007-2013 E93 BMW 328i - Convertible

Turner Motorsport
Part #: AN52NM1-328
Price: $459.00 (USD) 
Available
Free Shipping Free Shipping
Turner BMW 3mm Wheel Spacers (Pair) - Most BMWs (see applications)

3MM (.12 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4

Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems --

  • Correct wheel offset issues
  • Achieve a flush fitment instead of the "tucked under" look
  • Clearance the wheel from contact with other components (suspension, brakes, etc).
  • Improve handling and stability by increasing track width

A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required.

These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is light weight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market!

Turner Wheel Spacer Features --
+ hub-centric design, 1-piece spacer
+ precise tolerance fitment thanks to CAD process and CNC mill machine
+ aerospace grade aluminum  light weight but very strong with a high resistance to corrosion
+ additional military-spec hardcoat for further corrosion resistance
+ innovative Quick Release pockets for easy removal (better than a chamfered back edge)
+ laser engraved size and part number for easy identification
+ stealthy anthracite or black color
+ extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available)
+ Turner Motorsport track and street tested!
+ Made in the USA

Extended Wheel Bolts
Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing.

Spacer Specs:
(click to expand)
Spacer Specs:
bolt pattern:5 x 120
center bore:72.6mm
hubcentric?yes
wheel pad size:normal

Fitment Notes:
(click to expand)
5mm spacer note: a 3mm spacer sits on the existing hub lip but leaves less than 9mm of lip for the wheel to rest on. Therefore, wheels that have a bevel around the center bore will not engage the hub lip and may reseult in a vibration.

Year & Model Applications
(click to expand)
2008-2012 E82 BMW 128i 135 1M
1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Turner Motorsport
Part #: TWH9905004
Price: $79.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Turner Motorsport Custom Length Adjustable Front Sway Bar End Links (Pair)

Our renowned TMS adjustable front sway bar / swaybar links for BMWs are now available in custom lengths, making them easy to order for any aftermarket or custom suspension setups. Simply measure for your ideal link length, and order the links with the best length range (below). Each sway bar link has a 10mm diameter mounting pin/stud, which is the typical factory/stock size for a universal fitment. These are sold by the pair, and each set includes two matching sway bar end links.

These end links offer the quiet operation and long life of "stock" BMW end links, but with the strength and adjustability of rod-end style sway bar links. These sway bar links can be used on a wide variety of BMWs and aftermarket BMW suspensions. When measuring, please consider that the length ranges of our Custom Adjustable end links are measured from the center to center on the end link mounting stud / pin, as shown in our diagram.

Note for E9X M3: the unique mounting on the M3 strut requires a set of our adapter seats (#TSU9912AF9). You can add them with your links from the menu below.
 

TMS Part#Center to Center (mm)Center to Center (inch)

TSU9912A35155.00mm - 170.00mm6.10" - 6.69"

TSU9912A40170.00mm - 185.00mm6.69" - 7.28"

TSU9912A45180.00mm - 195.00mm7.08" - 7.67"

TSU9912A50190.00mm - 205.00mm7.48" - 8.07"

TSU9912A55207.00mm - 222.00mm8.15" - 8.74"

TSU9912AF1220.00mm - 235.00mm8.66" - 9.25"

TSU9912A70240.00mm - 255.00mm9.45" - 10.04"

TSU4612AF3250.00mm - 265.00mm9.84" - 10.43"

TSU9912A80261.00mm - 276.00mm10.28" - 10.87"

TSU5012AF8280.00mm - 295.00mm11.02" - 11.61"

TSU9912A95290.00mm - 305.00mm11.42" - 12.00"

TSU9912110320.00mm - 335.00mm12.59" - 13.19"

TSU9912115330.00mm - 345.00mm12.99" - 13.58"

TSU9912130362.00mm - 377.00mm14.25" - 14.84"

TSU9912135370.00mm - 385.00mm14.57" - 15.16"

TSU9912140381.00mm - 396.00mm15.00" - 15.60"

TSU9912145389.00mm - 404.00mm15.31" - 15.91"


Please select your length below. 

Turner Motorsport
Part #: TMS2104
Price: $159.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Carbon Fiber Roundel Emblem Decal Set - Hood/Trunk/Wheels/Steering Wheel Help your BMW stand out from the crowd with our colored Roundel emblem covers. Whether you are looking to match your paint color, hightlight your interest in motorsports, or freshen the look of your car, Roundel decals offer a great way to personalize your BMW. These easy to install vinyl decals adhere over the existing Roundel emblems. The kit includes colored quadrants to cover the hood emblem, trunk emblem, steering wheel and 4 wheel emblems - and fender emblems for Z3 and Z4. These are made to withstand all weather conditions and are removed with ease if required.

Currently we offer the following carbon fibre style roundel stickers: Printed Carbon Fiber - Black, Dynamic Carbon Fiber - Silver. Sorry, Dynamic Carbon Red, Dynamic Carbon Black, and Dynamic Black/Silver are no longer available.

Note: These are vinyl overlays for the existing roundels. Actual roundel emblems are not included. We have BMW Roundel emblems available here.

This item fits the following BMWs:
These emblem covers fit all BMW years and models including:
E30, E36, E46, E90, E92, E34, E39, E60, F10, E63, E38, E65, F01, X3, X5, X6, Z3, Z4 and more.
Turner Motorsport
Part #: TMS20551
Price: $29.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
E92 M3 Coupe, E93 M3 Cabrio Supersprint Performance Muffler

Free ground shipping! 

The Supersprint exhaust for the E92 M3 enhances the refined character of the M3 V8. With this Supersprint 'street' muffler you get a sophisticated exhaust upgrade that does not try to imitate a muscle car or sound too raucous and intimidating. This muffler was designed to meet European noise regulations so it won't be obnoxious or attention-getting. If a subtle and 'sexy' sound is what your M3 to sound like, this Supersprint muffler is the perfect choice!

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

 

section:rear muffler

connects to:Supersprint section 2 X-pipe or Supersprint connecting pipes to stock exhaust

tip style:80mm quad round

material:T304 stainless steel


Fitment note: this muffler can fit with either the stock OEM exhaust or with the rest of the Supersprint exhaust system. When fitting to the OEM exhaust, special connecting pipes are required. Add them to the order from the options below. No adapters are required when fitting the Supersprint section 2 to their mufflers.

This item fits the following BMWs:
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Cabrio

Supersprint
Part #: 980706
Price: $1857.76 (USD) 
$2477.01 (Sale - Save 25%)
Ships on Jan 12, 2018
Free Shipping Free Shipping
Schwaben 16oz Ball Peen Hammer The 16oz Ball Peen hammers are constructed with a fiberglass handles with a molded rubber grip. The heads are made from drop forged steel to avoid damage and to stand up to long years of impacts. Each side is precision ground for accurate striking points.
Schwaben
Part #: 016805SCH03A
Price: $8.21 (USD) 
$10.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 36oz Dead Blow Hammer The 36 oz dead blow hammer is built with steel shot internals that delivers a stronger force of impact and prevents rebound. The hammer itself is all built from a high-impact poly jacket that encases the head and handle. This hammer allows you to hammer softer metals, such as aluminum, without damaging the surface or the part itself. The handle has a diamond-shaped grip pattern to prevent your hands from slipping and sliding, even with your hands are covered with oil.
Schwaben
Part #: 016805SCH04A
Price: $11.21 (USD) 
$14.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Liqui Moly Manual Transmission / Differential Fluid 85w90 - 1 Liter

Interval oil changes are often recommended for manual transmissions to ensure long-term reliability and maximum wear prevention. Fresh oil will prevent small amounts of metallic build up from preventing fluid flow and clogging filters and narrow channels. 

Check your owner's manual to determine when it is best to flush your system and what type and weight fluid to use when re-filling your system. 

This 85w90 weight oil's multi-viscosity are perfect for ensuring protection in all climates and its synthetic composition allows for smoother shifts.

APPROVALS:

  • API GL5
  • MAN 342 Typ M1
  • MB-Freigabe 235.0
  • MIL-L 2105 D
  • ZF TE-ML 16C
  • ZF TE-ML 17B
  • ZF TE-ML 19B
  • ZF TE-ML 21A
  • ZF Freigabenummer ZF000695

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Liqui-Moly
Part #: 20010
Price: $8.96 (USD) 
$9.95 (Sale - Save 10%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Turner Motorsport Rear Deck Emblem / Badge TMS is proud to offer our own rear deck emblem, constructed out of the highest quality injection molded ABS plastic, then chrome plated and bonded to an OEM automotive grade adhesive backing. It perfectly accentuates the rear of your BMW and blends in flawlessly with the factory badges. Our badge measures 5" (127mm) x 1.1" (28mm) – similar to the dimensions on many of the factory badges.
Turner Motorsport
Part #: TMS1622
Price: $24.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Upper Spring Hats/Perches (Pair) - 2.5 Inch / 16mm Pin / Tapered Seat Made in the USA These aluminum upper spring hats are for coil over struts with a 2.5" coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

Spring I.D.Strut Pin Diam.Strut Pin Seat
2.5"16mmtapered

Turner Motorsport
Part #: TSU9980550
Price: $59.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
E9X M3 Turner Motorsport Racing Delrin/Aluminum Motor and Transmission Mount Set These solid motor and transmission mounts for the E9X M3 last a lot longer than factory rubber mounts and do not bind or 'wind up' as torque is transmitted through them (this means more power is directed through the driveline to the wheels). These mounts were developed over a number of years for our Grand-Am GS-class E92 M3s. This endurance racing format is perfect for developing parts that not only perform but are also durable under the harshest conditions you can expect. For the E9X M3, we tried and tested a number of motor and trans designs before deciding on this one as the strongest and best design under Grand-Am rules (non-metallic material made to the same dimensions as the original part). We use a special solid Delrin material on the motor mounts that is very heat resistant and sandwiched between aluminum mounting layers. This reinforces and gives additional strength to the Delrin and still meets Grand-Am rules for 'non-metallic' mounts. The heat resistance was a must given the close proximity of the M3's V8 headers to the engine mounts. We very strongly recommend using the transmission and engine mounts together as a complete kit. Mixing a rubber mount with a metal mount will cause undue stress on the mounting points and will lead to a failure. We never advise using a solid mount unless a corresponding solid mount is also used.

This is a set of two motor mounts and two transmission mounts. Solid mounting kits should be used for race only applications and only as a matching set.

This item fits the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible
Turner Motorsport
Part #: TDR90809MT
Price: $695.00 (USD) 
Ships on Jan 18, 2018
Free Shipping Free Shipping
Quantity:   
E82, E9X Front Strut Tower Reinforcement Plates (Pair) Made in the USA Help preserve the structural integrity of your BMW E82 1-series, or E90, E91, E92, or E93 3-series with these weld-in strut tower reinforcement plates. Deformation of the front upper strut tower has been common problem, especially in race-prepped cars, cars with lowered suspensions, any car that sees track use, or BMWs driven on rough roads. The strut tower deforms from suspension bottoming out, forces generated by the spring/shock assembly, and that forced concentrated in a relatively small area on the strut tower. The strut tower will exhibit deforming by cracking (especially around the stud holes), or "mushrooming" where the tower takes on a dome-shaped top instead of being flat. By thickening the sheetmetal material of the tower, you are making it stronger and more robust to prevent deformation. While the E82 and E9x cars are newer and better made than the previous E36 and E46 cars, any suspension modification or track use will make the new cars more susceptible to this problem.

These are mounted on the underside of the strut tower and need to be welded into place.

This chassis reinforcement fits the following BMWs:
2008+ E82 BMW 128i 135i
2006+ E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335i 335xi 335i xDrive M3
2007+ E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3
2007+ E93 BMW 328i 328xi 328i xDrive 335i 335xi 335i xDrive M3
Turner Motorsport
Part #: TSU9075STR
Price: $49.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Turner Motorsport Key Chain Add some blue and yellow jewelry to the key of your BMW. This sleek key ring pendant is made from high-quality stainless steel with colored Turner logo inlay and will look good paired with any BMW key whether it's a classic 2002 or a brand new M4.
Turner Motorsport
Part #: TMSKEYCHAIN
Price: $9.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Tool - 32mm / 36mm Fan Clutch and Oil Filter Cap Open-End Wrench Why buy two tools when you can get one that will do many jobs like this open end wrench? It is great for removing and installing the fan clutch and plastic oil filter cap. Also works great for removing and installing the VAN0S solenoid on M50 engine family. Use the same tools the Turner Motorsport techs use!
Turner Motorsport
Part #: TMI9910334
Price: $44.39 (USD) 
$64.95 (Sale - Save 32%)
$64.95
Limited Qty Sale
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Upper Spring Hats/Perches (Pair) - 60mm / 16mm Pin / Square Seat Made in the USA These aluminum upper spring hats are for coil over struts with a 60mm coil over spring. The specs are listed below; match the hat specs with your spring and strut. For a proper fitment you must confirm the spring hat matches the strut pin, especially on high-end motorsport struts.

Spring I.D.Strut Pin Diam.Strut Pin Seat
60mm16mmsquare

Turner Motorsport
Part #: TSU998063B
Price: $59.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
E82, E9X Turner Motorsport Steering Rack Stop Kit Whether it is installing new wider wheels, tires, brake ducts, shocks, or springs, there could be a rubbing issue on the inside of your fender well. Our Rack Stops will help protect your investment. Rack Stops are spacers that install inside of the tie rod and limits the amount of steering travel. You can save the costs of replacing rubbing tires, worn out brake ducts, cut shock reservoir hoses, and broken underside plastic panels. There is also the added benefit of knowing you can turn the steering wheel to full lock and not be worried that the wheels will rub. Our Rack Stop width is the approximate distance that will be removed from the tire’s path. For example, if a 20mm rack stop is used, there will be 20mm more clearance for a brake duct between the fender well and the edge of the tire. Included with this kit: 2 Delrin rack stops, 2 zip ties, and detailed instructions.

Fitment notes:
A) not for cars with electric power steering (EPS) or Active Steering
B) not for AWD Xi models

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M Coupe
2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
2006-2012 E91 BMW 328i - Wagon
2007-2013 E92 BMW 328i 335i 335is M3 - Coupe
2007-2013 E93 BMW 328i 335i M3 - Convertible
Turner Motorsport
Part #: TSU9090001
Price: $29.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben GT80 Plus Professional Scan Tool Tablet Platform

The GT80 PLUS by Schwaben is extremely easy to set up and even easier to use. It features a genuine Windows 8.1 operating system, Intel quad-core processor and a 10.1” LED capacitive touch display – making it your fastest, easiest solution to attaining valuable data.

This scan tool offers an amazing UI experience, giving users the ability to update with one touch, and easily navigate through menus. With the diagnostic tool connected to the vehicle’s OBD port, it automatically retrieves the VIN code. Additionally, you can manually enter the VIN to identify the model you are working on.

GT80 PLUS automatically checks and recognizes all available electronic control units on a vehicle in a matter of seconds. In addition, it instantly displays all the errors detected on the vehicle, and allows errors to be viewed and cleared with just a single click.

What is the GT80 Plus capable of?

● Compatible with current model vehicles

● Compatible with both OBDI and OBDII cars, SUVs, minivans, light-duty trucks sold worldwide

● Get access to powertrain, chassis and body systems

● Quick Test function to test most vehicle systems

● Read and clear diagnostic trouble codes and resets MIL

● View live vehicle sensors data in a text, graph and gauge format

● Merge interactive live sensor graphs for easy and intuitive diagnosis

● Live data self-learning and alarm when live data over range

● Record and playback your data logs for offline analysis

● Read and clear freeze frame data

● Run component/system bi-directional tests

● Support adaptations and control module coding

● Key coding for several vehicles

● Support the most commonly required service features like brake deactivation, service resets, and transmission adaptations

● Multi-language menus and code definitions for an international marketplace

● Code troubleshooters provide you faster and easier diagnosis

GT80 PLUS Features Actuations, Adaptations and Control Module Coding

GT80 PLUS cannot only read your codes, but it can also actuate components, run system tests, program control modules. Reading the trouble codes from your vehicle is easy. But without live data, bi-directional controls and other special functions, you may not have enough information to get the problem fixed right. It allows you to use the scan tool temporarily activate or control a vehicle system or component. With GT80 PLUS, the check of electronic components such as switches, sensors, relays, & actuators is made a simple task, saving your time and labor costs. It gives you the ability to ‘flash’ a control unit with new program data. Provided that a module can be re-coded, GT80 PLUS allows for the coding and programing of a replacement control module or changing previously stored incorrect coding as expensive factory tools do. In addition, it lets you recode the transponder in a mechanical key or key FOB. When a key for a modern vehicle is replaced, the new unit will often turn the mechanical switch but fail to initialize the system or start the vehicle. If this occurs, it is typically because the transponder inside the key has not been coded to that particular system.

With these factory tool like functions, GT80 PLUS is an invaluable tool that allows you to perform complicated repairs faster and easier, boosting your bottom line and customer satisfaction.

GT80 PLUS shows live vehicle sensors data in text, graph and gauge format and allows you to focus on any suspicious or symptom-specific data parameters. It’s powerful graphing capability gives you the ‘real picture’ of what’s going on in the vehicle. You can view up to 4 parameter graphs simultaneously.  Still you can merge multiple PID plots into one coordinate, so you can easily see how they affect each other, providing you with the most comprehensive and functional look at live data possible.

ã¢â‚¬â¢         USA Coverage

Chrysler,Ford,GM,Brazilian GM(For Brazilian Market Only)

ã¢â‚¬â¢         ASIA Pacific coverage

Au Ford (For Australian Market Only), Acura, Brilliance, BYD, Chery, Daewoo, Geely, Great Wall, Honda, Holden (For Australian Market Only), Hyundai, Infiniti, Isuzu, JAC, Kia, Lexus, Mazda, Mitsubishi, Nissan, Perodua, Proton, Scion, Subaru, Suzuki, Toyota

ã¢â‚¬â¢         European Coverage

Audi, Bentley, BMW, Bugatti, EU Ford, Jaguar, Land Rover, Maybach, Mercedes Benz, Mini, Opel, Porsche, Rolls-Royce, Saab, Seat, Skoda, Smart, Sprinter, Vauxhall, Volvo, VW

ã¢â‚¬â¢         French & Italian Coverage

Abarth, Alfa-Romeo, Citroen, Dacia, Fiat, Lancia, Maserati, Peugeot, Renault

Note: GT80plus has 18 months free updates after registration.

Tool must be registered to receive update notices.  

This scan tool works with all OBD I and OBD II BMW vehicles.

 

Schwaben by Foxwell
Part #: gt80plusKT
Price: $1699.95 (USD) 
$1999.95 (Sale - Save 15%)
Ships on Feb 19, 2018
Free Shipping Free Shipping
Quantity:   
Genuine BMW Coffee Mug & $100 Turner Motorsport Gift Certificate Special Gift Package! This BMW holiday gift package includes a $100 Turner Motorsport gift certificate (the perfect gift for any BMW enthusiast) and a Genuine BMW ceramic coffee mug. That's essentially a free authentic BMW coffee mug to give for that BMW lover on your shopping list.
Packaged by Turner
Part #: BMW-MUG-100TMS
Price: $100.00 (USD) 
$116.95 (Sale - Save 14%)
Ships in 5 days
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
E9X 335i Supersprint Section 1 with Metallic Sport Cats

Free ground shipping! 

Many people know that one of the main keys to getting power from a turbo is to open up the exhaust. Larger piping and less restrictions mean the exhaust gas can flow more easily which is less work for the turbo(s) and engine and that frees up torque and horsepower. These 100-cell metallic sport cats sit in oversized 60-65mm piping and are perfect for someone who installed cat-less downpipes but want some catalytic action on the exhaust to avoid bad smells and pollution. There are no crushed sections in the tubing, unlike the factory system, which contributes to improved flow. These are a direct replacement for the stock secondary cats and bolt to the turbo downpipe. At the back end these are clamped to a section 2 (stock or Supersprint X-Pipe).

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

 

section:sectiopn 1 metallic sport cats

connects to:downpipe; section 2

material:100-cell metallic cats, T304 stainless steel piping

 

This product modifies (but does not remove or defeat) emissions equipment. For this reason this product may not be CARB compliant, and therefore not emissions legal in some states. Consult local laws and regulations in your area. For more information on this product, feel free to contact our sales department.

 

 



This item fits the following BMWs:
2007-2011 E90 BMW 335i 335xi 335i xDrive - Sedan
2007-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 335i - Convertible

Supersprint
Part #: 980202
Price: $2287.70 (USD) 
$3050.27 (Sale - Save 25%)
Ships on Jan 11, 2018
Free Shipping Free Shipping
Quantity:   
E92/E93 335i Supersprint Right Performance Muffler (2x80mm Tips)

Free ground shipping! 

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

NOTE: Supersprint engineers and manufactures complete exhaust systems. This part was designed to be used with the rest of the Supersprint system on this car but may be used on its own. Contact us for more details.

Supersprint
Part #: 980206
Price: $690.14 (USD) 
$920.18 (Sale - Save 25%)
Ships on Jan 11, 2018
Free Shipping Free Shipping
Quantity:   
KBS Auto Gold Standard Fuel Tank Sealer Kit KBS Fuel Tank Sealer Kit contains all of the essential products to completely clean, treat, and seal a 25-gallon automotive fuel tank. The complete kit is formulated to stop fuel tank rust in its tracks and then coat and seal the tank, including filling small pinholes and weld seams. The final coating is impervious to fuels, alcohol additives, and most solvents. It's a tough ceramic-like barrier against future corrosion.

KBS Fuel Tank Sealer Kit includes:
+ KBS Klean - for 'washing' and stripping away other chemicals and foreign particles
+ KBS Blast - dissolves rust and metal oxides and converts it to a zinc phosphate that is ready for coating
+ KBS Gold Standard Tank Sealer - brushable coating that leaves a rock-hard ceramic-like coating that is very resistant to salt and chemicals
+ Chemical-resistant black nitrile gloves
+ Brushes and stirring stick
+ Detailed instructions

Step 1. Klean. The KBS process involves first treating and prepping the rusty area before the final coating is applied. The surfaces must first be cleaned with the KBS Klean to strip away grease and other chemicals that will interfere with coating adhesion. Klean is water based and biodegradable and doesn't have the harsh smells and effects of solvents or chemicals. Let Klean soak but rotate the tank every minutes to ensure complete coverage. The cleaner the tank the better the adhesion so repeat until you're satisfied. The Klean process should be left to completely dry before moving to Step 2.

Step 2. Blast. Rust Blast is the actual conversion of rust into zinc phosphate state and is etched for proper paint adhesion. This step is essential for stopping the rust in its tracks and from spreading. It's also a primer for the final stage of coating, leaving behind a white powdery residue. Like the Klean it's also water based and biodegradable. For the rust conversion to be complete pour the Blast into the tank and rotate several times to ensure coverage. Rinse and allow to dry completely before sealing.

Step 3. Tank Seal. For the finishing touch, pour the KBS Tank Sealer into the tank. The Sample kit includes enough coating for a 25-gallon tank and it's formulated to be applied as a single coat. Rotate the tank to ensure complete coverage and drain the excess. It's important to not allow the Tank Seal to pool or collect so make sure it drains well. Use any excess to coat and seal the outside of the tank, especially in areas that might have leaks. Tank Seal leaves a very tough and hard surface that is impervious to most solvents, fuels, acids, and road salt. When fully cured it's flexible, allowing it to move as the tank expands and contracts. It's self-leveling too which produces an even finish that will not crack, flake, or peel and will withstand temperatures up 600*F (316*C).

Application note: The KBS process will need approximately one week to fully complete (the recommended drying time on the tank is four days). This is perfect for restoration jobs or longer builds where the car can sit for an extended period of time.

Installation Instructions

In order for the 3-step process to work correctly, you must closely follow KBS' instructions. You can view/download them here prior to receiving your order:
For a PDF of the installation instructions, click here.

Demonstration Videos


KBS Tank Seal Process -
KBS Klean and KBS Blast

KBS Tank Seal Process -
KBS Tank Seal

Due to shipping restrictions, this product can ship only via UPS Ground.
Turner Motorsport
Part #: 53000
Price: $65.95 (USD) 
Ships in 5 days
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Tire Totes Wheel Felts

Benefits:

  • Protects rims from knicks and scratches
  • Additional level of protection from tire and brake residue for your cloths and vehicle interior
  • One size fits all Tire Tote bags
  • Durable .25" thick felt pad
  • Easy to install
  • Large ventilation hole


Kit Includes: - Two Wheel Felts
If you wish to protect both front and back of thewheel buy one kit per wheel, if you only want to protect the front face ofwheel, buy one kit per pair of wheels.
(Tire Totes sold separately)

Dimensions:
 • 
1/4" x 20"
 • 
Fits with Tire Tote product
 
  (22" through 29" tire)

Turner Motorsport
Part #: 00037
Price: $33.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Stealth Bulb Set -Single Filament Front/ Rear for BMW with Offset Pins Stealth Bulb Set -Single Filament Front & Rear for BMW with Offset Pins. These are the are the best concealment bulbs on the market; invisible in clear lenses when off and bright amber when on. No more ugly orange egg yolk look in your clear corners. Check your stock bulb and compare to photo before ordering.
Turner Motorsport
Part #: TMS3658
Price: $29.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Carbon Fiber Center Grills - E92 3 Series Coupe, E90/E92 M3 Ditch the boring and overstated factory chrome front grilles and get a darker and more aggressive look on your car. These replacement grilles are made from ABS plastic with a carbon fiber weave on the exterior frame. Carbon fiber is replacing chrome and aluminum as the most desired decorative trim. Since it has its roots in aerospace and motorsports the look gives off the impression of cutting-edge technology and lightness. But our suppliers have improved the fit and finish of carbon’s inherently rough appearance. There are several quality grades to carbon fiber weave and we would put this right in the middle. It’s a good quality carbon weave without costing hundreds more like an Original BMW carbon part would. We inspect each grille for finish imperfections and quality issues so you’re getting only the ones we approve. If you want to complete the carbon fiber makeover on your car check out our other carbon grilles, emblems, trim, and spoilers. But please note that we source our carbon products from multiple suppliers and the carbon pattern will vary. Our grilles are sold in pairs – one for the left and one for the right. Installation is easy as they snap out and then snap back in.

These carbon fiber front grills fit the following BMWs:
2007-3/2010 E92 3 Series Coupe - 328i, 328xi, 335i & 335xi (pre-LCI, non-facelift models)
2007-3/2010 E93 3 Series Convertible 328i & 335i (pre-LCI, non-facelift models)
2008+ E90/E92/E93 M3 (fits M3 coupe, M3 sedan & M3 convertible)
ECS
Part #: CFG927BY1
Price: $229.95 (USD) 
Ships on Dec 29, 2017
Free Shipping Free Shipping
Quantity:   
Differential and Transmission Oil Drain and Fill Combo Wrench This multi-functional combination wrench features a 14mm Allen hex socket at one end and a 17mm hex wrench at the other. This allows you to perform drain and fill procedures on your BMW with one tool! The 14mm Allen is common for drain and fill plugs on BMW differentials. This wrench is ideal because many BMWs with spare tire wells do not have adequate space to fit a standard 14mm Allen socket and ratchet. The 17mm hex is common for transmission drain and fill plugs. Other BMW transmissions may also use a 14mm female hex / Allen plug.
Turner Motorsport
Part #: 2760
Price: $59.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Tool - Manual Transmission Drain Plug Tool - 17mm To remove the transmission drain plug on a manual transmission requires a special male, hex-drive socket. This BMW drain plug removal tool will fit any 1/2" drive ratchet.
Turner Motorsport
Part #: 143294
Price: $13.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Tool - 46mm 3/4 Drive 6-point Socket Commonly used for the removal and installation of front wheel bearings on many BMWs. This socket works with the wheel bearing nut with BMW part number 31 21 1 128 336 -- used with the following front wheel bearings:

Front Wheel Bearings that use 31 21 1 129 336 nut:
BMW part#Fitment / Chassis
31 21 1 468 753E30 M3 (1988-1991), E24 6 ser (thru 1989)
E28 5 ser (1982-1988)
31 22 6 757 024
31 22 1 468 926
E36 3 ser, including M3 (1992-1999)
E46 3 ser, except M3 (1999-2005)
E32 7 ser (1988-1994)
E34 5 ser (11/1991-1995)
E31 8 series (3/1992 on)
31 22 2 229 501E46 M3 (2001-2006)
Turner Motorsport
Part #: TMI9910M46
Price: $68.95 (USD) 
Ships in 3 Days
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Stainless Brake Rotor Set Screw (34211161806) - Set Of 4

This is a set of stainless steel brake rotor retaining screws to replace the factory steel screws. As everyone knows, the stock screws will seize in the holes over time. And the shallow recess on the head means the screw is easily stripped. These replacement rotor screws are stainless steel and won't corrode and seize in place.

This is a set of 4 stainless screws. Most BMW rotors take one screw but some M cars after 2001 will take two screws per rotor.

ECS
Part #: 34211161806KT
Price: $9.96 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
E82, E9X Turner Race Rear Shock Mounts for Spherical Bearing Race Shocks (RSM)

Made in the USAIf you're installing racing rear shocks with a spherical bearing end you will need this adapter mount for the top of the rear shock. Spherical or rod-end bearings are common on race shocks but they are somewhat universal and mounts are not usually included. We designed and engineered these mounts for our E9X M3 and E90 328i IMSA/CTSCC racecars. Our cacing upper shock mount is machined out of aircraft grade aluminum with a tough anodize finish and high grade hardware. Due to the wide variety of spherical bearings and rod-ends found on race shocks, the bushing kit is sold seperately (see chart for bushing sizes).

view larger

Bearing Spacer Chart
Optional BushingsBushing Kit Part#B=Bore Dia.W=Ball WidthOptional Bushings
TSU9007B1515 mm12 mm
TSU9007B50.500" inch.500" inch>

E9X Racing Rear Spherical Upper Shock Mount Instructions

This item fits the following BMWs:
2008-2012 E82 BMW 128i 135i 1M
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible

Turner Motorsport
Part #: TSU9006RU1
Price: $299.95 (USD) 
In Stock
Free Shipping Free Shipping
Daytona 2014 Livery Decal Set for Fujimi BMW Z4 GT 2013 Model Build your own Turner Z4 GTD / GT3 1:24 Scale Model! This decal sheet contains livery graphics to model the Turner Motorsport BMW Z4 as raced at the 2014 Daytona 24 hours. Decals are die cut for accuracy and fitment. The livery decals were created using our original livery design files, so we can vouch for its overall accuracy. The completed model looks incredible!

This graphics decal set is specifically designed for the Fujimi brand 1/24th scale BMW Z4 2013 kit. Model sold separately. Assembly required
Turner Motorsport
Part #: MSH-94
Price: $20.00 (USD) 
Ships on Dec 29, 2017
Free Shipping Free Shipping
on orders $199 and up
UUC DSSR for E90 E92 335i 2007-2009 UUC Double Shear Selector Rod - E9X 335i (2007+ E90/E92/E93 335i)
Increases the precision and smoothness of ALL shifters -- OE and aftermarket! Whether you have a factory stock shifter or aftermarket short shift kit, this Dual Shear Selector Rod (DSSR) will dramatically improve it.

The goal.
While producing a "short" shifter, our more important goal in improving the BMW shifter assembly is to increase the precision and smoothness of the overall operation.

The problem.
One significant wear area that has never been addressed previously is the wear and ovalization of the linkage connection points at the transmission and the shifter's lower pivot.

In the original BMW design, the connection at both ends has a large injection-molded plastic bushing. We already know how badly plastic wears in an automotive application, and these areas are not an exception. The design of the selector rod has a pin at 90° to the main rod, which exerts a tremendous amount of leveraged force on the selector joint bushing from one side (known as a single shear force). The result is a steady deformation of the bushing, resulting in looseness and slop in the entire mechanism. (see photo at right) The image shows a selector joint that has approximately 25K miles of use.

The looseness and slop are magnified by the leverage-multiplication effect of the shift lever itself. The result is an in-gear shifter "free play" of 3/4" and up to 1" in either direction, over 35mm total.

The cure.
A temporary fix is to simply replace the selector joint. Unfortunately, this is only a temporary fix as the new joint's bushing will exhibit the same rapid deformation. To permanently fix this, a change in the fundamental design of the pivot is required, changing the assembly to a double shear system with the UUC Double Shear Selector Rod (DSSR).

The DSSR redistributes the torsional forces from the pin/bushing interface to the complete face area on both sides of the selector joint. By taking advantage of the strength of steel in the DSSR and the body of the joint, the problem of deformation is eliminated and the movement of the selector rod correlates directly to movement of the selector joint - the only "free play" movement remaining in the shifter assembly is from within the transmission itself. In-gear "free play" is reduced to approximately 10mm total when used with a UUC EVO3 shifter.

The original BMW shifter and all other aftermarket shifters (except UUC which uses deformation-free bearings) contain a plastic bushing similar to the selector joint, and the exact same wear and ovalization causes those shifters to get sloppy. The DSSR permanently fixes these shifters also. The DSSR is compatible with all brand shifters, whether original BMW or other-brand aftermarket. When used with the original BMW shifter or other aftermarket shifters, the amount of "free play" will be greatly reduced but varies by shifter (flexation of the shifter shaft contributes to the total "free play" travel).

This item fits the following BMWs:
2007-2009 E90 BMW 335i - Sedan
2007-2009 E92 BMW 335i - Coupe
2007-2009 E93 BMW 335i - Convertible
Please supply us with your VIN so we can ensure you get the correct DSSR for your year/model.
Sorry, this will not work on Xi and xDrive AWD models.




Due to limited availability, please call to order.
UUC
Part #: DSSR86-3
Price: $96.75 (USD) 
$129.95 (Sale - Save 26%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Turner BMW 17.5mm Wheel Spacers (Pair) - Most BMWs (see applications)

17.5MM (.69 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4

Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems --

  • Correct wheel offset issues
  • Achieve a flush fitment instead of the "tucked under" look
  • Clearance the wheel from contact with other components (suspension, brakes, etc).
  • Improve handling and stability by increasing track width

A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required.

These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is light weight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market!

Turner Wheel Spacer Features --
+ hub-centric design, 1-piece spacer
+ precise tolerance fitment thanks to CAD process and CNC mill machine
+ aerospace grade aluminum  light weight but very strong with a high resistance to corrosion
+ additional military-spec hardcoat for further corrosion resistance
+ innovative Quick Release pockets for easy removal (better than a chamfered back edge)
+ laser engraved size and part number for easy identification
+ stealthy anthracite or black color
+ extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available)
+ Turner Motorsport track and street tested!
+ Made in the USA

Extended Wheel Bolts
Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing.

Spacer Specs:
(click to expand)
Spacer Specs:
bolt pattern:5 x 120
center bore:72.6mm
hubcentric?yes
wheel pad size:normal

Year & Model Applications
(click to expand)
2008-2012 E82 BMW 128i 135 1M
1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Turner Motorsport
Part #: TWH9905018
Price: $97.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
E9X M3 Turner Test Pipes and Software Bundle

CAT DELETE + RACE SOFTWARE PACKAGE
Max HP gain = 48 hp
Max Trq gain = 32 ft-lbs

For a performance upgrade on your E90/E92 M3 there is nothing better than the cat-delete with specialized software. This combination produces over 40whp and 30wft-lbs with no other modifications - a massive gain on an already impressive engine!

Our Race software has been fine-tuned over the years beginning with our IMSA/CTSCC E92 M3 racecars (2011 GS class champions). We modify over 40 different maps in the ECU for such things as fuel and timing maps at part throttle and full throttle, revised torque settings, knock control, VANOS and cam timing, pedal input, top speed limiter, and rev limiters. Additional tuning has been done for the cat delete - prevent limp mode and check engine lights, fault codes for cat delete, and turning off the secondary air pump (to satisfy race series regulations). Turning off the secondary air pump also disables the cold start sequence so your idle and warm-up will be smoother and quieter. A built-in cold start rev limiter safeguards the engine internals until the oil warms up. Not only is there a lot more power at all RPM but the engine is more responsive and smoother!

Our M3 Test Pipes were designed specifically for race/track use and offer a cost-effective means of removing the very restrictive primary cats. On our Turner M3 and BMW Motorsport M3 GT4 racecars the primary cats and restrictive piping is eliminated. Our M3 cat delete pipes were the first on the market and have proven again and again to make big power on their own or especially when paired with our Stage 2 performance software. Our Test Pipes are Made in the USA with strict production tolerances and quality control. We manufacture our pipes with high quality, mandrel-bent stainless steel pipes and laser-cut flanges for an optimum fitment. New gaskets are included. The factory secondary cats remain in place. Your original O2 sensors plug into the Turner Test Pipes.

Our software is installed via the Turner flashing OBD tool. This tool plugs into the OBD socket in the dash and the performance software is installed from a laptop computer connected to the tool. It also works as a fault code scanner to read and reset diagnostic trouble codes and reset adaptations. The software program requires a Windows XP/Vista/7/8/10 laptop and the installation and setup are very easy (click here for instructions). The OBD tool, cable, and files are shipped to you with simple setup instructions. There is no need to remove your ECU and ship it. You can have your M3 flashed in under an hour from the convenience of your garage or driveway!

Turner Race Software Options:

Minimum Octane

You can choose between 91 or 93. We have developed tuning for the standard 'high octane' premium fuel found around the country (91 is the maximum available in some areas). Our power and torque gains are advertised with 91. If using 93 we can alter the knock sensor logic to extract more power with the higher grade fuel. Additional race fuel maps are also available, contact us for details.

Rev Limit

On 6-speed manual cars we can set a higher engine rev limit. 8,300 is stock; 8,400 is what was used on the GTS model in Europe; 8,600 is the safest raised rev limit that we have used in our race cars. To make things simple we offer it as either stock 8,300 or raised to 8,600. On DCT cars the higher rev limits are for M shift modes only (manual/paddle shift). The higher revs do not work in full auto D modes. Work is continuing on higher limits for D mode.

Launch Control

Our software can also enable a Launch Control feature. To use it, activate M Dynamic Mode, engage first gear, hold the throttle to the floor (it will only rev to 3,500 RPM), and dump the clutch. Keep your foot to the floor and hang on! You don't have to modulate the clutch and throttle - the engine and DSC modules will handle the launch. We experimented with different launch points and found that 3,500 RPM offers a great combination of tire hook-up and torque output. This is available on manual transmission cars only (DCT has their own built-in launch control).

M Dynamic Mode Steering

We can set the M Dynamic Mode (MDM) steering effort as the standard steering. The MDM steering is heavier and requires more effort when driving at higher speeds. Some owners feel that the standard steering is too light and over-boosted and the MDM steering is a nice change. This does not affect the steering effort, or the other features, of MDM.

240E Update

Our performance and race software is built around a specific version of stock BMW software (version 240E). It was released towards the end of M3 production and includes a number of significant changes over older versions for drivability and torque managment. 240E was such a big step forward that it's considered an upgrade all on its own. No worry if you don't have 240E - we will provide you with a free update before the Turner performance software is installed.

In 2015 BMW released a 241E update. There are minor changes to the software code but the tuning maps and data are all the same as the 240E version so there is no need to update to 241E. If the dealer offers it we recommend that you decline. If you're already on 240E there is no reason to switch to 241E (the tuning maps are the same).

***This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.***


Click here for E92 M3 Test Pipe installation instructions.

This package fits the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible

Turner Motorsport
Part #: TMS224294
Price: $1398.95 (USD) 
Available
Free Shipping Free Shipping
Schwaben 6mm Hose Clamp Flexible Driver

Makes those hard to reach hose clamps much easier to loosen up.

Features:

  • 6mm driver
  • 6"  flex shaft
  • Overall length of 10-1/2"
  • No-slip grip resistant to wet or oil coated hands

 

Schwaben
Part #: 010658SCH02A
Price: $8.21 (USD) 
$10.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Carbon Fiber Center Grills - E92 E93 03/2010+ (except M3) Ditch the boring and overstated factory chrome front grilles and get a darker and more aggressive look on your car. These replacement grilles are made from ABS plastic with a carbon fiber weave on the exterior frame. Carbon fiber is replacing chrome and aluminum as the most desired decorative trim. Since it has its roots in aerospace and motorsports the look gives off the impression of cutting-edge technology and lightness. But our suppliers have improved the fit and finish of carbon’s inherently rough appearance. There are several quality grades to carbon fiber weave and we would put this right in the middle. It’s a good quality carbon weave without costing hundreds more like an Original BMW carbon part would. We inspect each grille for finish imperfections and quality issues so you’re getting only the ones we approve. If you want to complete the carbon fiber makeover on your car check out our other carbon grilles, emblems, trim, and spoilers. But please note that we source our carbon products from multiple suppliers and the carbon pattern will vary. Our grilles are sold in pairs – one for the left and one for the right. Installation is easy as they snap out and then snap back in.

This item fits the following BMWs:
3/2010+ E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive
3/2010+ E93 BMW 328i 335i
ECS
Part #: BM-0242
Price: $192.95 (USD) 
Ships on Jan 4, 2018
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
aFe Throttle Body Spacer - E9X 335i/xi 2011+ w N55 engine, F30 335i, F32 435i Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque - +6 hp, +13 lbs/ft torque - and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers. This spacer was dynoed with a aFe air filter and dynamic air scoop.

This item fits the following BMWs:
2014+ F22 BMW M235i M235i xDrive
2011 E90 BMW 335i 335xi 335i xDrive - Sedan
2011-2012 E92 BMW 335i 335xi 335i xDrive - Coupe
2011-2012 E93 BMW 335i - Convertible
2012+ F30 BMW 335i 335i xDrive - Sedan
2013+ F32 BMW 435i 435i xDrive - Coupe
2014+ F34 BMW 335i xDrive GT - Gran Tourismo
2014+ F36 BMW 435i Gran Coupe 435i xDrive Gran Coupe
2013+ E84 BMW X1 xDrive35i
2011+ F25 BMW X3 xDrive35i
2015+ F26 BMW X4 xDrive35i
ONLY for cars with N55 twin scroll turbo engine.
AFE
Part #: 46-31007
Price: $269.10 (USD) 
$299.00 (Sale - Save 10%)
Direct Ship
Free Shipping Free Shipping
Quantity:   
AFE Exhaust 2.5in Race Pipe - E92 E93 328i 2007-2013 Introducing the new aFe Power MACH Force XP Race Pipes for the 07-13 BMW 328i E92 & E93 non-turbo. These exhaust race pipes are constructed from 2.5" brushed finish, mandrel bent, 304 stainless steel and are TIG-welded. While developing this system, we ensured that these aFe race pipes not only increased performance but delivered a powerful and aggressive tone. These race pipes are required to be used with aFe cat-back exhaust system P/N 49-36313.

Note: This is a "Race Only" product used solely for competition. It's use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use including recreational off-road use could be in violation of local, state and federal laws. 

All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

OE Style Flanges:
High quality flanges are used for a perfect OE style fit and hassle free installation.

100% Hand Tig Welded:
Welded by a certified craftsman for race proven strength and durability, TIG welding provides the strongest welds reducing stress cracks.

2.5" Mandrel Bent Tubing:
Mandrel bent tubing provides smooth, uniform, constant diameter bends that greatly reduce restriction for maximum flow and efficiency.

Also Fits:
BMW 328xi/328i xDrive (E92/E93) 07-13 L6-3.0L non-turbo
AFE
Part #: 49-36319
Price: $359.10 (USD) 
$399.00 (Sale - Save 10%)
Direct Ship
Quantity:   
E9X M3 aFe Mach Force Race Center Pipe with Cats

The aFe Race Center Pipe eliminates the factory primary and secondary catalytic converters in favor of 2.5" mandrel-bent stainless exhaust with 200-cell race cats. This aFe exhaust section fills the need for a E9X M3 center section with better flow than stock but that still incorporates catalytic converters. aFe recorded gains of 21whp and 35ft-lbs of torque on their dyno (when also combined with the aFe intake and mufflers).

aFe spent considerable time developing a system to eliminate both sets of stock cats and the center resonator for maximum flow but also doesn't lose torque or power at any RPM point, while also bolting to the factory headers and rear mufflers. It's a direct replacement for the stock section 1 and section 2 mid-pipes and includes a tuned center x-pipe to evenly balance exhaust pulses and maintain backpressure through the system. It uses all of the factory mounting locations, gaskets, and hangers and is made from the best 304 stainless steel.

By tuning the exhaust with different pipe diameters and the location of the x-pipe crossover, the aFe Race Pipe produces a very aggressive, raucous, and powerful exhaust note even when used with the stock muffler system. By opening up the exhaust and deleting the two restrictive cat sections and resonators, you will be able to hear a lot more of the exhaust as well as a deeper tone with more rumble - and with a big bump in power to go along with the sound! Don't be misled by other "race" pipes with minor sound changes - the aFe exhaust sounds a lot like our own E92 M3 racecars.
 

section:section 1 cats + section 2 x-pipe

connects to:stock headers; any rear mufflers

material:T304 stainless steel

 

This product modifies (but does not remove or defeat) emissions equipment. For this reason this product may not be CARB compliant, and therefore not emissions legal in some states. Consult local laws and regulations in your area. For more information on this product, feel free to contact our sales department.



This item fits the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible

AFE
Part #: 49-36316
Price: $1349.10 (USD) 
$1499.00 (Sale - Save 10%)
Direct Ship
Quantity:   
Schwaben Low Profile 2 Ton Aluminum Floor Jack With Aluminum 3-Ton Jack Stands

Having a low profile floor jack can be a great asset for your garage, perfect for those with a lowered car as well as those that aren't. Most car owners with a lowered vehicle have been in the position of their floor jack not making the clearance needed, the low profile jack is the answer. 

  • Dual pump pistons raises the saddle to maximum height in only 5 pump strokes, with minimum effort.
  • Special low profile thick frame side plates and reinforced lift arm for added strength and use.
  • Wide track front wheels help provide chassis torsion control and durability.
  • Angular positioned pump pistons provide maximum effective pump stroke even when jack is completely under the vehicle.
  • Ball bearing mounted rear swivel caster wheels for easy maneuverability.
  • Side mounted handles for carrying and easy positioning.
  • Overload and bypass safety valve prevents jack overload and over extension.
  • Two piece quick release padded handle for storage or transport.

Details:

  • Jack Capacity 2 Ton
  • Max Lift Height 20"
  • Low Height 3.25"
  • Chassis Length 26.5"
  • Overall Width 13"
  • Saddle Diameter 4.5"
  • Handle Lenght 50"
  • Shipping Weight 50 lbs

The ultra light Schwaben jack stands only weigh 4.7 lbs each. Fit and finish on these stands just shows how much pride in workmanship goes into our stands.These stands are all aluminum construction with heavy-duty  flanged bases to safely stabilize loads. Features 6 locking positions for a secure load in multiple heights. The load pin is extra heavy duty at .584 in. diameter and features a posi lock ball to insure pin stays in place.  

Min. Height is 10.6".

Max Height is 15.4".

Large 7" diameter base.

Outer support tube is 2-1/8" in diameter.

Schwaben
Part #: 011362sch01aKT
Price: $266.92 (USD) 
$355.90 (Sale - Save 25%)
In Stock
Quantity:   
Schwaben 2-Pc 67

These ramps never scoot, slip or slide while rolling onto the ramps.All that said means these ramps are easy to drive up on and very safe. Our Schwaben ramps will never scratch or blemish your floors.

Having ramps to use offers more than just convenience, it offers safety. Laying under a car working is much easier to do knowing the car is resting the wheels on a firm surface.

Please refer to chart below to see if these 67" Schwaben ramps are right for you vehicle.

1. Take a yardstick, and wedge it under the front edge of front tire.

2. Raise it up until it hits the underside of your car( the spoiler)

3. Measure from the tip of the yardstick to the ground, vertically.

 67 " long,14" wide, 10" lift height, at 15 lbs each and a low 10.8 degree incline.

If your measurement is 7.25" or greater, you can clear these ramps with no problem. 

These extensions will lower your approach angle to 6.6 degrees. Once you get the car into place, you can remove the extensions for more working room under the vehicle. One set holds up to 3000 lbs.

For increased safety, use wheel chocks with all Schwaben Ramp products.

Schwaben
Part #: 006160sch01aKT
Price: $356.25 (USD) 
$475.00 (Sale - Save 25%)
Ships on Jan 3, 2018
Quantity:   
ECS Tuning Wheel Spacers - 30mm - 72.6mm CB

Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

This item fits the following BMWs:

2008-2012 E82 BMW 128i 135 1M
1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1976-1981 E12 BMW 528i 530i
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

Rear Only
2007-2013 E70 BMW X5M
2007-2014 E71 BMW X6 xDrive35i X6 xDrive50i X6M

ECS
Part #: 001058ECS04-30KT
Price: $109.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Low Profile 2 Ton Aluminum Floor Jack With 12

 A complete set offered to ensure that the proper lifting techniques are at use. It's never wise to work under a vehicle supported by only a floor jack, with this complete kit you get a complete matching set to get the job done safe and fast.

  • Special low profile thick frame side plates and reinforced lift arm for added strength and use.
  • Wide track front wheels help provide chassis torsion control and durability.
  • Angular positioned pump pistons provide maximum effective pump stroke even when jack is completely under the vehicle.
  • Ball bearing mounted rear swivel caster wheels for easy maneuverability.
  • Side mounted handles for carrying and easy positioning.
  • Overload and bypass safety valve prevents jack overload and over extension.
  • Two piece quick release padded handle for storage or transport.
  • Dual piston's for 5 pump full extension

Details:

  • Jack Capacity 2 Ton
  • Max Lift Height 20"
  • Low Height 3.25"
  • Chassis Length 26.5"
  • Overall Width 13"
  • Saddle Diameter 4.5"
  • Handle Lenght 50"
  • Shipping Weight 50 lbs

Schwaben 12" wheel Stands:

These stands are made from special EPS foam with an anti-skid coating.

Won't scratch or mark your floors!

Lightweight at only 5 lbs each, makes these stands easy to carry and maneuver.

Works on virtually any surface, including sand!

Will not scoot, slip or slide, no matter the surface.

Specs:

12" tall,15.75" long,12" wide.

Works on wheel diameters from 25 to 30 inches.

Schwaben
Part #: 011362sch01aKT1
Price: $293.21 (USD) 
$390.95 (Sale - Save 25%)
In Stock
Quantity:   
Schwaben Pocket Brake Fluid Tester

It is necessary to check the moisture content of your brake flluid beacuse brake fluid is hygroscopic, meaning it readily absorbs moisture. Over a period of time moisture will cause brake fluid to degrade. Once brake fluid reaches a certain level the brake fluid is no longer able to function properly in the brake hydraulic systems. 

This Schwaben Brake fluid tester has a green, yellow and red light that represent's moisture content of DOT 4 brake fluid to determine if service is needed.

Features:

  • Green LED, H2O level is <1.5% = OK
  • Yellow LED, H2O level is 1.5 to 3% =Replace soon
  • Red Led, H2O level is >3% Replace Immediately
  • Auto-off function
  • Bright Led Flashlight 
  • One AAA battery operation- not included

 

Schwaben
Part #: 015745SCH01A
Price: $19.46 (USD) 
$25.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
AFE Twisted Steel Downpipe with Cats - E9x 335i, E82 135i (N55)

Features:

  • In house testing produced a max gain of +14 horsepower and +39 ft. lbs. of torque verified by our in house dyno (results from the "Race" version down pipe)
  • This system utilizes a 400 CPSI (cell per square inch) 48-state legal catalytic converter for maximum flow
  • A unique 2.5" to 3" stepped design is used to increase exhaust velocity
  • Constructed of durable mandrel bent brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking
  • 100% hand TIG-Welded by certified craftsmen for race proven strength and durability
  •  
  • aFe power introduces an all new Elite Twisted Steel catted down pipe for the BMW 335i (E9x) /135i (E82/88) 11-13 with L6-3.0L (t) N55 engine. This down pipe is designed using a 48-state legal 400 cpsi catalytic converter and mandrel-bent, 304 stainless steel tubing for optimum flow resulting in added horse power and torque. The down pipe is 100% hand TIG-Welded and uses a 2-1/2" into 3” stepped design that increases exhaust velocity and eliminates low pressure drops which helps to scavenge the exhaust for increased intake charge and more power.

    48-State Legal Catalytic Converter:
    This system utilizes a 400 CPSI (cell per square inch) 48-state legal catalytic converter for maximum flow.

    2-1/2" to 3" Stepped Design:
    A unique 2.5" to 3" stepped design, is used to increase exhaust velocity and increase usable torque. This means more aggressive throttle response and increased passing power.

    TIG-Welded: 
    100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks.

    Brushed 304 SS Construction:
    This down pipe is constructed of durable mandrel bent brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking.

    Hassle-Free Installation:
    All hardware and brackets are included for a hassle-free installation. This unit also comes with a 2-year warranty.

    Also Fits:
    BMW 135i (E82/88) 10-14 L6-3.0L (t) N55
    BMW 335i/xi (E90/92) 09-13 L6-3.0L (t) N55
    BMW X1 35xi (E84) 09-15 L6-3.0L (t) N55

    aFe down pipes are engineered and manufactured in our Corona, California manufacturing facility.

This product modifies (but does not remove or defeat) emissions equipment. For this reason this product may not be CARB compliant, and therefore not emissions legal in some states. Consult local laws and regulations in your area. For more information on this product, feel free to contact our sales department.

AFE
Part #: 48-36302-HC
Price: $719.10 (USD) 
$799.00 (Sale - Save 10%)
Direct Ship
Free Shipping Free Shipping
Quantity:   
Schwaben Set Of 4 Pinch Weld Protectors

These weld protectors allow you to safely jack up your vehicle without crushing or bending any pinch welds. These will fit any jack and will work with many jack stands such as the Schwaben Aluminum Jack Stands.

Specifications:

  • 3" wide
  • 1" tall
  • Single groove top
  • Double grooved bottom
Schwaben
Part #: 3107838KT
Price: $29.96 (USD) 
$39.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben 6

Ensure you are getting the most accurate measurements you can with the Schwaben 6" Carbon Fiber Composite Digital Caliper. Machined components and things like shims and bearings all require very exact sizes for proper clearance and fitment. With this caliper, you can check these component's measurements quickly and accurately, down to .0005in/.01mm graduations. 

Specifications:

  • Carbon Fiber Composite Digital Caliper made from a milled carbon fiber / plastic mix
  •  Digital display with inch, metric and fractional read out 
  •  Push button conversion 
  •  4 measurements - inside, outside, depth and step 
  •  Large LCD Panel 
  •  6"/150mm range 
  •  .0005"/.01mm/1/64" resolution 
  • Powered by (1) SR44/357 Battery (included)
Schwaben
Part #: 019711SCH01A
Price: $10.46 (USD) 
$13.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Turner Motorsport Aluminum Skid Plate - E9x M3

Damaged belly pan? We've been there. Every "thunk" or "scrape" against the factory underbody is cringeworthy. Fear not, M3 owners. At long last, our engineers have boldly addressed an Achilles' heel of this performance beast: the belly pan. The lowest point of the car, the OE belly pan ends up being an easy target for curb stops, inclines, and road (or track) debris. The fiber material used in construction of the factory piece make it lightweight, but at the cost of very limited durability. With delicate engine components being mere inches away (including the oil cooler), our heavy duty skid plate should be on every M3 owner's install list.

After much evaluation and testing, our engineers have designed an especially strong, attractive skid plate while retaining the complex aero features found on the OE belly pan. The center pan is manufactured from 3/16” 5052 aluminum and is connected directly to the frame rails via 1018 steel brackets and a fully-reversible, proprietary fastener system for maximum rigidity. Our design features beefy 1/8" thick aluminum side plates that are perfectly integrated with all factory fender liner mounting locations for a factory fit. With ducting mimicking that of the factory pan, you'll experience factory cooling and aerodynamics, and are even able to re-use your OE rubber ducting trim. 

They say the best offense is a good defense - with that in mind, our skid plate offers improved ground clearance to avoid costly, cringe-worthy, and dangerous impacts in the first place. Despite this, you still make contact? Rest assured, this skid plate is designed for severe duty usage. 

All components are protected using wrinkle black powder coat finish to maintain a sleek appearance and protect against corrosion. Includes new stainless steel hardware.

Installation instruction PDF

Features:

  • 3/16” thick aluminum main plate and 1/8” thick aluminum side plates
  • 1018 powder coated steel tube support braces for maximum skid plate strength
  • Retains factory air duct for oil cooler
  • Maintains wheel liner mounting positions
  • Contains all necessary stainless mounting hardware and components
  • No modification necessary; easy to convert back to stock
  • Made in America!

This performance upgrade is for the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible

Turner Motorsport
Part #: 021807TMS03
Price: $599.95 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Liqui-Moly
Part #: 20230
Price: $8.96 (USD) 
$9.95 (Sale - Save 10%)
Ships on Jan 10, 2018
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Cool Carbon S/T PLUS Performance Brake Pad Set - Front - E60 Xi, E82 1M, E84 X1, E9X 335/M3

Owned and operated by performance driving enthusiasts, Cool Carbon Performance not only has the German pedigree known for engineering rigor and excellence, but their experience with club, track and racing events has given them a special sensitivity to the unique needs of today's daily street performance drivers.

For their latest Street Performance PLUS Brake Pad release, special consideration was given to build materials and R&D test results.

In Cool Carbon's new dedicated brake pad facility, they've developed a new proprietary “low-Met” formula utilizing Twaron Aramid fibers, similar to Kevlar material, that rapidly dissipates heat and resists wear and was developed and subjected to a test protocol that included friction, temperature, and wear monitoring.

The stunning results of these efforts are seen in their real world performance: greater linear and predictable initial bite that the previous S/T pads, consistent braking torque, superior resistance to heat-cycling, proven fade resistance, and crucially reduced dust levels.

BMW owners will also notice a welcomed measure of practicality and drivability with Cool Carbon products. The “grabby” tendency often felt with OEM BMW brakes is eliminated; the CC brake compound allows for a much more controllable and linear application of brake pressure and a much greater degree of modulation.

Features:

  • Excellent for spirited street driving and light to moderate track use
  • Increase in stopping power while remaining street friendly
  • Very linear, smooth pedal modulation
  • Low to no noise or dust - rotor friendly!
  • Faster heat dissipation allowing consistent performance at higher temperatures, even greater than previous S/T pad's performance
  • Processed using “true positive molding”; pads molded individually to pressure for exacting performance; density and compressibility specifications are controlled for each pad, maintaining specific performance attributes.
  • Developed at an all new German R&D facilities; tested extensively on the German autobahn; fine tuned at the renowned Nurburgring race circuit
  • New brake pad curing process and triple scorching for a faster initial bedding period
  • New pad formula with Twaron Aramid in the composite for greater thermal stability and better long term durability compared to other high performance pads
  • Improved break pad shims for more efficient noise reduction

Turner Motorsport recommends using the Cool Carbon Street Performance rear brake pads to maintain an ideal braking balance, preventing major brake bias or uneven wear characteristics.

This item fits the following BMWs:
2011 E82 E88 BMW 1M Coupe
2006-2011 E90 BMW 335d 335i 335xi M3 - Sedan
2007-2013 E92 BMW 335i 335is 335xi M3 - Coupe
2007-2013 E93 BMW 335i 335is M3 - Convertible
2004-2010 E60 BMW 525iA 525xi 528xi 530xi 535xi
2011-2015 E84 BMW X1 xDrive35i

Cool Carbon Performance
Part #: 7799-D918PL
Price: $118.36 (USD) 
$147.95 (Sale - Save 20%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Cool Carbon S/T PLUS Performance Brake Pad Set - Front - E9X 328i/xi 08-13

Owned and operated by performance driving enthusiasts, Cool Carbon Performance not only has the German pedigree known for engineering rigor and excellence, but their experience with club, track and racing events has given them a special sensitivity to the unique needs of today's daily street performance drivers.

For their latest Street Performance PLUS Brake Pad release, special consideration was given to build materials and R&D test results.

In Cool Carbon's new dedicated brake pad facility, they've developed a new proprietary “low-Met” formula utilizing Twaron Aramid fibers, similar to Kevlar material, that rapidly dissipates heat and resists wear and was developed and subjected to a test protocol that included friction, temperature, and wear monitoring.

The stunning results of these efforts are seen in their real world performance: greater linear and predictable initial bite that the previous S/T pads, consistent braking torque, superior resistance to heat-cycling, proven fade resistance, and crucially reduced dust levels.

BMW owners will also notice a welcomed measure of practicality and drivability with Cool Carbon products. The “grabby” tendency often felt with OEM BMW brakes is eliminated; the CC brake compound allows for a much more controllable and linear application of brake pressure and a much greater degree of modulation.

Features:

  • Excellent for spirited street driving and light to moderate track use
  • Increase in stopping power while remaining street friendly
  • Very linear, smooth pedal modulation
  • Low to no noise or dust - rotor friendly!
  • Faster heat dissipation allowing consistent performance at higher temperatures, even greater than previous S/T pad's performance
  • Processed using “true positive molding”; pads molded individually to pressure for exacting performance; density and compressibility specifications are controlled for each pad, maintaining specific performance attributes.
  • Developed at an all new German R&D facilities; tested extensively on the German autobahn; fine tuned at the renowned Nurburgring race circuit
  • New brake pad curing process and triple scorching for a faster initial bedding period
  • New pad formula with Twaron Aramid in the composite for greater thermal stability and better long term durability compared to other high performance pads
  • Improved break pad shims for more efficient noise reduction

Turner Motorsport recommends using the Cool Carbon Street Performance rear brake pads to maintain an ideal braking balance, preventing major brake bias or uneven wear characteristics.

This item fits the following BMWs:
2008-2011 E90 BMW 328i 328xi - Sedan
2008-2011 E91 BMW 328i 328xi - Touring Wagon
2008-2013 E92 BMW 328i 328xi - Coupe
2008-2013 E93 BMW 328i - Convertible

Cool Carbon Performance
Part #: 7799-D918NCPL
Price: $118.36 (USD) 
$147.95 (Sale - Save 20%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben BMW/MINI Fuel Injector O-Ring Tool Set

At almost half of the normal cost of Genuine BMW Installation Tool - No. 130190, this Schwaben BMW Fuel Injector O-Ring Tool Set is a perfect alternative to save money and ensure your have the proper tool for the job when it come time to service your fuel system. Make sure the job is done correctly the first time with this specialty item, relieving frustration and saving time all while preventing you from damaging critical seals or the injector itself that could otherwise be damaged if using the wrong tools for the job. 

This tool set includes all of the same components you would get with the BMW tool, the seal cutting pliers and seal installation components, made to exact specifications for perfect operation.

Schwaben
Part #: 023883SCH01A
Price: $59.96 (USD) 
$79.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
Quantity:   
Turner Motorsport Poly Tow Strap With Bolt - Red, Blue, Black - E30 E36 E46 E9X Our polyester tow strap is far and above the best tow strap available for the modern BMW chassis. We use a heavy-duty, chemical-resistant polyester strap webbed around a stainless steel stud. There is plenty of length available for tow hooks to grab onto without hitting your bumper and damaging paint or causing cracks. The precision-cut stud is fits E30 (89+), E36, E46, E82, E90, E92, Z3, and Z4. We have further refined the shape and size of the bolt so that spoiler modifications are kept to a minimum. Note that on some models you may need to modify the bumper slightly for the best fit.

A tow strap is a better pickup point than a fixed steel ring, which will add weight and protrude past the bumper. Some racing series have banned the steel rings because they increase the likelihood of contact during close racing. Our straps are sold in bright red, bright blue, or black (red suggested for racing use as it makes it easy for tow truck operators and safety crews to spot). On some models, the strap may be tucked behind the bumper panel when not on track, which makes this perfect for dual-use track/street cars and full racecars alike. Priced per strap so order two for the front and rear.

This item fits the following BMWs:
1989-1991 E30 BMW 318i 318is 325i 325is
2008-2012 E82 BMW 128i 135i 1M Coupe
1992-1999 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2006 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Turner Motorsport
Part #: TMI9020TSI
Price: $84.96 (USD) 
$99.95 (Sale - Save 15%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
ECS 2-Piece Front Brake Rotors - Pair (348x30) - E9X 335d/i/xi

These 2-piece floating rotors help dissipate heat better than a standard cast iron rotor and are also lighter for less unsprung weight. Managing heat in the brake system is vital to braking performance, especially on the track or when driven hard. It's why your brake rotors have internal vanes that vent heat as the rotor spins. These 2-piece ECS rotors feature an outer cast iron friction surface ring that is separate from the aluminum center hat. This allows better airflow through the vanes and for the friction ring can expand as it gets hot. The rotors are also cross-drilled for better ventilation and slotted to improve brake pad performance.

ECS 2-Piece Rotors feature:

  • Aluminum hats for light weight
  • Heat-treated cast iron friction rings
  • 2-piece assembly improves brake cooling
  • Anti-corrosion coating on non-friction surfaces and hard anodizing on rotor hat

These are the same size as the stock rotors so your stock caliper and mounting bracket will fit and there will be no clearance issues with your wheels or to other components. Stainless steel rotor retaining screws are included. You can use these with any brake pad.

Price is for the pair of brake rotors.

This item fits the following BMWs:
2006-2011 E90 BMW 335d 335i 335xi - Sedan
2007-2013 E92 BMW 335i 335is 335xi - Coupe
2007-2013 E93 BMW 335i 335is - Convertible
2012-2015 E84 BMW X1 xDrive35i

ECS
Part #: 003294ECS01KT
Price: $599.95 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Limited Edition #94 Turner Motorsport Z4 GTD Minichamps - 1 of 300 Limited Edition 1 of 300.

Celebrate a piece of Turner Motorsport history with this Limited Edition Minichamps 1:43 resin model of the BMW Z4 GTD which won the 2014 IMSA Tudor United Sportscar Championship!This Z4 GTD was driven by Dane Cameron and Markus Palttala to both the driver and team titles! This car won at tracks such as Laguna Seca, Watkins Glen, Road America and Virginia International Raceway (VIR). Complete with the official livery including sponsors H&R Springs, Northwest, Borla, Escort, Motul, Continental Tires and Recaro. This 1:43rd scale model is extremely detailed and manufactured by the renowned Minichamps.

This limited edition collectors item makes the perfect gift this holiday season. Get the BMW race fan or enthusiast on your list the No. 94 Turner Championship Z4.
Turner Motorsport
Part #: TMS222774
Price: $84.95 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Complete Turner Baffled Oil Catch Can Kit - Standard Flow 8oz

When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

Features:

  • 6061-T6 billet machined body, anodized black for lasting protection and appearance
  • Strategically positioned 4 chamber baffle system maximizes oil / air separation 
  • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
  • Sealed with a pre-installed viton O-Ring
  • Includes 2.5mm allen key to remove baffle plates for cleaning
  • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
  • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
  • Optional use drain hole - drain kit included!
  • Universal mounting kit
Turner Motorsport
Part #: 022798tms01-07KT
Price: $189.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Exterior Temperature Sensor Repair Kit

The external temperature sensor on a BMW is placed within the underbody plastics that extend very close to the road. As a result it's easy to damage by rolling into a low curb or parking lot tire stop. The first sign you may have a problem with your external temperature sensor is if you have a really low reading. This is caused by the sensor either being damaged, missing or having an open circuit; the wires leading to the sensor may have torn off in an impact.

 

Includes solder filled heat shrink connectors, contact leads with wire, plug housing, temperature sensor, 10 pack of zip ties, and a panel mount zip tie for mounting the sensor.

Packaged by Turner
Part #: 65816905133KT2
Price: $57.88 (USD) 
$68.09 (Sale - Save 15%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Coolant Refill/Air Purge Tool

When it comes to BMW's we all know the weak point is commonly in the cooling system, many models proving hard to bleed the air pockets out after the refresh. The coolant refill tool solves this problem, ensuring that you get an air pocket free fill. The entire task is as simple as draining the system like normal, reinstalling the drain plugs and hooking the tool up to your refill location. The reason this tool works so well is due to the venturi valve, it converts air pressure from the compressor to vacuum inside the cooling system, then with a twist of a valve sucks coolant right into the system using the vacuum pressure.  

This tool requires access to a standard air compressor with a minimum rating of 90 PSI (6.2 bar).  A convenient, though not required part to complete the job is a container large enough to hold the entire coolant mixture capacity for your vehicle.  This will dramatically reduce the risk of any unwanted air being drawn into the system.  This tool is designed to refill the cooling system after it has been drained.

 

Schwaben
Part #: 003466SCH01
Price: $57.71 (USD) 
$76.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben European Car Electrical Terminal Tool Kit - 12 Pieces

This tool comes in handy especially when working with an engine harness. Certain areas are always prone to corrosion and this tool makes having to re-pin a connector a breeze.

Unlike small screwdrivers, picks, and paper clips, these tools are the correct size and shape to remove and install tiny electrical pins and terminals at plastic block connectors with ease, and will not damage the connectors in the process.

Packaged in a blow molded case to keep everything secure and organized.

Schwaben
Part #: ce-70-2
Price: $80.00 (USD) 
$89.95 (Sale - Save 11%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Impact Screwdriver Kit - 6 Pieces

The impact driver is a fast and effective way to remove tight or corroded screws and bolts, reducing the chance of rounding off--or rounding out--the fastener head. Insert a slotted or Phillips head screwdriver bit into the driver.

For stubborn bolts, remove the black screwdriver bit adapter head, and replace it with any 3/8 - inch drive socket.

Features:

  • Impact driver tool with red rubber grip 
  • Four screwdriver bits (2 Phillips; 2 slotted) 
  • 3/8 - inch drive bit holder

 

Schwaben
Part #: pcs2800
Price: $12.71 (USD) 
$16.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
ECS Tuning Wheel Spacer & Bolt Kit - 15mm - 72.6mm CB

Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

This kit includes wheel bolts that are lab tested to meet or exceed ISO 898 class 10.9 mechanical and physical properties to ensure perfect fastening of the wheel to the hub with no issues or potential to snap under aggressive driving conditions.

ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

 

This item fits the following BMWs:

2008-2012 E82 BMW 128i 135 1M
​1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

ECS
Part #: ECS#255KTWB
Price: $104.95 (USD) 
Ships on Feb 26, 2018
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
ECS Tuning Wheel Spacer & Bolt Kit - 12.5mm - 72.6mm CB

Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

This kit includes wheel bolts that are lab tested to meet or exceed ISO 898 class 10.9 mechanical and physical properties to ensure perfect fastening of the wheel to the hub with no issues or potential to snap under aggressive driving conditions.

ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

 

This item fits the following BMWs:

2008-2012 E82 BMW 128i 135 1M
​1988-1991 E30 BMW M3
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
2007-2012 E93 BMW 328i 335i M3 - Convertible
1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
1989-1995 E34 BMW 525i 530i 535i 540i M5
2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
1982-1989 E24 BMW 633csi 635csi M6
2004-2010 E63 BMW 645ci 650i M6
1981-1987 E23 BMW 733i 735i
1988-1994 E32 BMW 735i 735il 740i 740il 750il
1995-2001 E38 BMW 740i 740il 750il
1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

ECS
Part #: ECS#254KTWB
Price: $99.95 (USD) 
Ships on Jan 9, 2018
Quantity:   
Liqui-Moly Race Tech GT1 10w-60 Engine Oil - 5 Liters

Synthoil Race Tech GT1 is a modern hig performance engine oil formulated for engines that are experience extreme load pressures. Fully synthetic, the oil combines base oils and additives to provide exception lubrication and engine wear protection. This design and composition makes it a great choice to used for racing and other demanding needs. Great for both gasoline and diesel engines.

Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

Liqui-Moly
Part #: LM2024
Price: $40.40 (USD) 
$44.89 (Sale - Save 10%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
aFe Throttle Body Spacer - E9X 335i, E82 135i, E60 535i (N54 engine) Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency - +6 hp, +3.5 lbs/ft torque . Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers. This throttle body spacer is 50-state legal (CARB E.O Number D-516-2).

Only for cars with N54 engine. Not for cars with N55 engine.

This throttle body spacer fits the following BMWs:
2008-2010 E82 BMW 135i
2010+ E82 BMW 1M Coupe
2006-2010 E90 BMW 335i 335xi 335i xDrive- Sedan
2007-2010 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
2007-2010 E93 BMW 335i - Convertible
2004-2010 E60 BMW 535i 535xi 535i xDrive
AFE
Part #: 46-31002
Price: $179.10 (USD) 
$199.00 (Sale - Save 10%)
Direct Ship
Free Shipping Free Shipping
Quantity:   
E9X 335 Analog Vent Boost Gauge

Go for a classy retro touch in your 335 with an analog boost gauge that fits in your left-center vent. This gauge has been meticulously designed to match the rest of your E90/E92 gauges - the font and the lighting are a perfect match! This is a complete 335 boost gauge kit that looks like it came from the factory. The full kit includes lines and fittings for connecting into the factory diverter valve vacuum lines. This way of measuring boost is more accurate than reading from the OBD socket like most electronic gauges. The gauge comes with a new vent for the center console and is angled to the driver's line of sight. Also works on supercharged applications!

335 analog boost gauge includes -

  • 45mm ECS boost gauge
  • vent pod
  • pressure transducer with wiring harness
  • gauge power supply harness with connectors
  • vacuum t-fitting
  • moisture filter (from vacuum line)
  • braided vacuum hose
  • rigid vacuum hose
  • install instructions
ECS
Part #: 02165ECS
Price: $189.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Front Mount Intercooler - N55 Forge Motorsport discovered the perfect combination for your N55 with this bar and plate design intercooler. The intercooler averaged drops of 15 degrees celcius compared to a stock intercooler. Installation of this larger intercooler is an easy bolt-on without any modification or cutting necessary. Complete kit includes new silicone hoses and clamps with instructions.
Forge
Part #: FMINTBM
Price: $990.00 (USD) 
$1100.00 (Sale - Save 10%)
In Stock
Free Shipping Free Shipping
Quantity:   
AFE
Part #: 49-36312-P
Price: $1349.10 (USD) 
$1499.00 (Sale - Save 10%)
Direct Ship
Quantity:   
AFE
Part #: 49-36312-C
Price: $1709.10 (USD) 
$1899.00 (Sale - Save 10%)
Direct Ship
Quantity:   
Schwaben Magnetic Protecta Wheel Socket Set

Schwaben Protecta Sockets have color coded mar-free exterior sleeve  that prevent nicks and scratches left by plain metal sockets. Internal spring loaded magnet holds lug nut in place.

Features:

  • 17mm, 19mm and 21mm Sockets included in a blow molded case.
  • All sockets are 1/2" drive
  • 3-3/8" ( 86mm) long

Use these with your breaker bar or impact gun to remove the tightest wheel bolts and lug nuts: when reinstalling wheels, use them to final torque wheel fasteners to factory specifications.

 

Schwaben
Part #: 016135SCH01A
Price: $44.96 (USD) 
$59.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Extended 19mm Wheel Stud Socket Adapter

Installed extended wheel studs and would love to be able to change wheel spacers as needed? But wait, if you have a flat tire or want to change it up at the track. But now your lug wrench is not deep enough to reach the nuts.

Features:

  • This specially made socket features 19mm male hex on one end and 19mm socket on the other
  • Works to extend reach between wrench and lug nut
  • Keep inside your glove box so it is ready for any tire change on the road or on the track

NOTE: Not for use with impact.

Schwaben
Part #: 004351SCH02A
Price: $11.21 (USD) 
$14.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Water Pump Pulley Holder for Removal of Fan Clutch Replacing the fan clutch on most BMW models requires holding the water pump pulley while removing the fan clutch lock nut. With less than 1 1/2" clearance on some models this project can easily turn into a mechanical nightmare. Using our special slim line fan clutch wrench in conjunction with the appropriate pulley spanner, the removal and installation required only a few moments.
Turner Motorsport
Part #: 143240
Price: $32.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Stealth Bulb Side Marker Bulbs (Set) Stealth Bulb Side Marker Bulbs (Set). Fits most BMW side marker indicators. No more ugly orange egg yolk look in your clear corners. Check your stock bulb and compare to photo before ordering.
Turner Motorsport
Part #: TMS450
Price: $29.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Turner Motorsport Custom Tough Case iPhone 4 / 4S The best iPhone case just got a bit better! We've taken the Tough Case iPhone cover and customized it with a photo of the Turner Motorsport #96 E92 M3, running hard at Barber Motorsports Park.

The Tough iPhone 4 / 4S case uses dual layers of resilient material for a rugged case that protects the object of your affection with a defensive style. The base layer is a form-fitting silicone skin that completely surrounds the iPhone 4 / 4S, adding a layer of cushion that absorbs shocks and impacts.The outer layer is an impact resistant, polycarbonate hard shell fits that fits directly on top of the silicone skin for extra iPhone protection.A solid finish makes the iPhone 4 / 4S case easy-to-hold, while the streamlined design keeps the silhouette slim enough to fit in your pocket.

Dimensions: 4.62 x 2.39 x 0.45 in (117.2 x 60.6 x 11.3 mm)
Turner Motorsport
Part #: 96-IPHONE
Price: $17.50 (USD) 
$24.95 (Sale - Save 30%)
$24.95
Limited Qty Sale
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
E92 M3 Borla ATAK Exhaust - Rear Mufflers Section: rear mufflers
Installation: slip-on
Tip Style: quad round 90mm Borla angle cut
Power Gain: +8hp

This is the most aggressive muffler section that Borla produces for the E90/E92 M3. Their ATAK system - A costically T uned A pplied K inetics - allows a very high volume without drone and distortion. This is beyond your the usual 'muscle car' sound - this is full blown automotive thunder! Borla manages the sound waves inside the exhaust to produce an exhaust note that maintains its tone as revs rise. With ATAK, the sound output is tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output. This exclusive technology produces the highest available dB (decibel) levels in the Borla street-legal lineup, and is designed for high-performance purists who prefer exhaust notes over their stereos. For an exhaust that really emphasizes the M3's motorsport background this is THE exhaust system.

Every Borla is made with 304 stainless steel for the internals and muffler body. Unlike other systems that can use coated aluminum, mild steel, or 409 stainless, the Borla uses true 304 stainless on the inside as well as the outside. This prevents the muffler from rusting and deteriorating from the inside out. Borla guarantees every muffler with a 1,000,000 mile warranty. Turner Motorsport has been the leading Borla dealer for BMW exhausts since we sold our first system in 1996, including using Borla Exhausts on every Turner BMW racecar.

This Borla Exhaust fits the following BMW models:
2008-2012 E92 BMW M3 coupe
2008-2012 E93 BMW M3 cabrio
Borla
Part #: 11802
Price: $1794.23 (USD) 
$2015.99 (Sale - Save 11%)
Direct Ship
Free Shipping Free Shipping
Quantity:   
Turner Motorsport Oil Cooler Line Fitting Kit - E36 E46 E82 E9x Made in the USA NEW, updated design allows for more applications! The TMS Oil Cooler Fitting kit allows much more flexibility in the routing of oil cooler lines. Standard oil coolers utilize “hard lines” which can cause fitment issues for cars with superchargers, Accusumps, or other aftermarket performance parts. Our kit replaces the oil cooler hard lines with two TMS engineered -10 AN fittings, mounting bracket, and O-rings. Flexible braided hoses can then be run to the oil cooler which eliminates routing issues from supercharges, intakes, and other components. The brackets are CNC machined stainless steel and the -10 AN fittings are lightweight aluminum.

NEW REVISED Kit fits E36 Euro oil filter housing, E36 Euro oil cooler, E46 M3 stock oil filter housing, E46 M3 stock oil cooler , and works great with aftermarket oil coolers.

Clickhere for installation instructions.

-10 AN Oil Line Connector Kit BMW Applications:
2008+ E82 BMW 135i 1M Coupe - with factory oil cooler housing
1992-1998 E36 BMW 323is 323ic 325i 325is 325ic 328i 328is 328ic M3- Euro oil filter housing (adaptable to US models), Euro oil cooler
2001-2006 E46 BMW M3 - US/Euro oil filter housing, US/Euro oil cooler
2006-2011 E90 BMW 335i 335xi 335i xDrive - Sedan - with factory oil cooler housing
2007-2012 E92 BMW 335i 335is 335xi 335i xDrive - Coupe - with factory oil cooler housing
2007-2012 E93 BMW 335i - Convertible - with factory oil cooler housing
Turner Motorsport
Part #: TEN9910200
Price: $69.95 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Turner Front Carbon Fiber Strut Brace - E9X M3 Improve the handling and steering response of your BMW today with a Turner Motorsport carbon fiber front strut brace.

Turner Motorsport developed these in association with our European partners to provide a higher quality and better performing strut brace than our competitors. Made of carbon fiber with aluminum mounts these strut braces - also know as a "stressbar" - help to minimize chassis flex during the hardest cornering, which keeps your tires squarely on the road and delivers the traction you need when you need it most. Shock absorption is also increased, which reduces road forces and body roll and lends a firmer road-feel. Strut braces provide benefits for both street driven and track driven BMW's.

This item fits the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible
Turner Motorsport
Part #: 067041C
Price: $399.95 (USD) 
Ships on Feb 6, 2018
Free Shipping Free Shipping
Quantity:   
E92/E93 335i Supersprint Left Performance Muffler (1x90mm Tip)

Free ground shipping! 

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

NOTE: Supersprint engineers and manufactures complete exhaust systems. This part was designed to be used with the rest of the Supersprint system on this car but may be used on its own. Contact us for more details.

Supersprint
Part #: 980244
Price: $599.61 (USD) 
$799.48 (Sale - Save 25%)
Ships on Jan 11, 2018
Free Shipping Free Shipping
Quantity:   
E92/E93 335i Supersprint Left Performance Muffler (2x80mm Tips)

Free ground shipping! 

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

NOTE: Supersprint engineers and manufactures complete exhaust systems. This part was designed to be used with the rest of the Supersprint system on this car but may be used on its own. Contact us for more details.

Supersprint
Part #: 980236
Price: $690.14 (USD) 
$920.18 (Sale - Save 25%)
Ships on Jan 11, 2018
Free Shipping Free Shipping
Quantity:   
E92/E93 335i Supersprint Stainless Left Racing Muffler (Single 90mm Tip)

Free ground shipping! 

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

NOTE: Supersprint engineers and manufactures complete exhaust systems. This part was designed to be used with the rest of the Supersprint system on this car but may be used on its own. Contact us for more details.

Supersprint
Part #: 046044
Price: $546.36 (USD) 
$728.48 (Sale - Save 25%)
Ships on Jan 11, 2018
Free Shipping Free Shipping
Quantity:   
E9X M3 Supersprint Section 1 Test Pipes With Metallic Sport Cats

Free ground shipping! 

E9X M3 Supersprint Sport Catalytic Converters with Test Pipes are designed to replace the stock primary and secondary catalytic converters with high flow sport cats. With eliminating one set of cats and enlarging the piping the improved flow will increase performance and throttle response as well as increase sound and reduce weight. The straight-flow cat design allows much better flow than the stock cats, giving a significant horsepower and torque gain and a throaty sound. Removing the very restrictive primary cats results in a 25hp gain!

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

Supersprint metallic sport catalytic converters are sourced from HJS of Germany. For 30 years HJS has been supplying motorsports teams with sport cats when rules required them. HJS is now a worldwide leader in sport cat technology and performance. Rally cars, German DTM, and Formula 3 all rely on HJS for clean, reliable horsepower. Supersprint works closely with HJS to spec a catalytic converter that is correct for the vehicle and engine package. This allows for a substantial increase in flow but which, at the same time, keeps the environmental specs within European limits. With any high-flow catalytic converter, special software or other work may be required to keep emissions fault codes and check engine lights from displaying. Supersprint catalytic converters are sold for track and other off-road uses only.

 

section:section 1 with metallic sport cats

requires:Supersprint section 2 x-pipe, p/n 980713

material:T304 stainless steel


Fitment Note: These sport cats were designed to be used only with the Supersprint section 2 x-pipe (p/n 980713) and Supersprint rear mufflers. Custom fabrication by an exhaust professional will be required to use these without the Supersprint exhaust sections. These cats include post-cat O2 sensor ports allowing for a complete installation by extending your original post-cat O2 sensors to the new location. Special Race software or module may still be required to keep the SES light and fault codes from appearing.

 

This product modifies (but does not remove or defeat) emissions equipment. For this reason this product may not be CARB compliant, and therefore not emissions legal in some states. Consult local laws and regulations in your area. For more information on this product, feel free to contact our sales department.

 

 


This item fits the following BMWs:
2008-2011 E90 BMW M3 - Sedan
2008-2013 E92 BMW M3 - Coupe
2008-2013 E93 BMW M3 - Convertible

Supersprint
Part #: 980702-980722
Price: $2215.43 (USD) 
$2953.90 (Sale - Save 25%)
Ships on Jan 11, 2018
Free Shipping Free Shipping
Quantity:   
Rear Differential Mounts - Solid Delrin Race - E82 1M, E9X M3 Made in the USA TMS E90/E92 M3 solid differential mounts are designed around current Grand Am Cup regulations, derived from, and currently used in TMS racecars. Thick Delrin casings are used as the non-metallic solid bushing. Replacing your differentials rubber mounts with this kit will result in a snappier feel when cornering and better suspension performance. You save money by never having to replace the stock rubber mounts that fail due to old age and fatigue. These bushings are CNC machined in the USA and made with high-grade materials.

This item fits the following BMWs:
2011-2012 E82 BMW 1M Coupe
2006-2011 E90 BMW M3 - Sedan
2007-2013 E92 BMW M3 - Coupe
2007-2013 E93 BMW M3 - Convertible
Turner Motorsport
Part #: TDR9080DM3
Price: $239.95 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
Turner Motorsport Brake Bleeder Bottle with Check Valve - Simple Bleed This is the new evolution of our popular Brake Bleeder Bottle. The latest design features a one-way check valve inside the bottle that is operated when you pump the brakes. This is a more economical and simpler system than other "1 man bleeding" kits - no modification to your brake system and you only have to buy the one bottle. The newest bottles also include upgraded caps and fittings for a tighter seal.

The one-way check valve is extremely simple to use - attach the bottle and hose, open your bleed screw, and pump your brakes from the pedal. The check valve opens with each pump to let fluid and air out of the system and then seals tight when the pedal is released. The bottle uses a large magnet to conveniently stick to your brake disc while you run the hose to the caliper.

Works on just about all brake systems so no need to have specialized adapters or bleed screws.
Turner Motorsport
Part #: BBMCV
Price: $21.95 (USD) 
Ships on Dec 22, 2017
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Tool - 27mm 1/2 Drive 6-point Socket 27mm hex socket with 1/2" drive.
Turner Motorsport
Part #: TMI9910M27
Price: $27.00 (USD) 
Ships in 3 Days
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Rear Subframe Bushings/Mount Set - Turner Solid Aluminum - E82, E9X

A BMWs sub-frame is the heart of the suspension - as the subframe twists and shifts under load all of the suspension mounting points also move. The rear suspension feels loose and lacks precision. As rubber or hydroelastic bushings wear the bushing deflection gets worse. If you have a highly tuned 335i/xi you're putting even more strain on weak bushings. The solution is a stiffer and more durable material. Even BMW has moved to solid mounts on the F10 M5 and F8X M3/M4. These fully solid E82/E90/E92 aluminum mounts have zero deflection - the subframe does not move at all. The rest of the suspension can work as designed and maintain the proper alignment and motion ratios. The driver will notice the difference as the car is more stable and the handling is more precise.

Although we designed these for use in our racecars, they can work on the street so long as the driver can tolerate some additional noise, vibration, and harshness. These mounts are CNC machined in the USA and made with high-grade aluminum. The set is for all four subframe mounts.

These solid rear sub frame mounts fit: 
2008-2012 E82 BMW 128i 135i 
2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan 
2006-2011 E91 BMW 325i 328i - Wagon 
2007-2012 E92 BMW 328i 335i 335is - Coupe 
2007-2012 E93 BMW 328i 335i - Convertible 

Turner Motorsport
Part #: TDR9080SS3
Price: $299.95 (USD) 
In Stock
Free Shipping Free Shipping
Quantity:   
E9X M3 Monoball Rear Lower Shock Mount Bushings

These spacer bushings sit on either side of the lower shock mount on E9X M3 and E82 1M race shocks. Some race shocks do not include these spacers and they are obviously required for installation. We also designed these bushings to fit snug in the "cradle" on the M3 control arm (universal type bushings are not designed for the cradle). These bushings sit on either side of the spherical bearing at the bottom of the race shock. They properly located the shock within the M3 control arm. We made these spacers in two sizes to accommodate the two most popular sizes of bearings in the lower shock.

Kit comes with four spacer bushings (enough for two rear shocks) and two new Grade 10.9 bolts.

 




 

Description / Part #Bearing Bore Diam.Bearing Width

Metric, #TSU9007LBC15mm12mm

Standard, #TSU9007LBB1/2"1/2"

 

 

 

This item fits the following BMWs:
2011 E82 BMW 1M Coupe
2008-2013 E90 E92 E93 BMW M3 Sedan, Coupe, Convertible

Also fits other models forced to use the M3 lower rear control arms.

Turner Motorsport
Part #: TSU9007LBC
Price: $69.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
19mm 12x1.5 Turner Yellow Zinc-Coated Race Wheel Nut Turner Motorsport’s five years of endurance competition has taught us many things. One was that not all lug-nuts are made the same. While the standard nuts that we sell are great for daily drivers, HPDE events, and club racing, a beefier and more durable nut was needed for the 3-hour, 6-hour, and 24-hour professional endurance races. During the 24 Hours of Daytona, our crew guys made over 80 tire changes in NASCAR-style pitstops. That kind of abuse from air guns and fast work required the "next level" of lug-nut. These nuts are a high-grade steel with a zinc coating and they incorporate several innovative features.

The wheel-side of the nut has recessed threads so that the nut has to be square to engage the threads. Without the recess, it’s far too easy to start the threads with the nut being crooked.

The 19mm head of the nut is slightly rounded to help the socket find its position.

The zinc plating that we use is reasonably durable without being excessive. With too much coating, the chipped and worn coating fragments can end up in the threads, leading to all sorts of trouble. Anyone who has used nuts repeatedly knows that the coating is not going to last forever. The constant abuse from air guns will chip it all away. So why add weight and the potential for disaster with excess coating? We did away with most of the danger from that with a lighter coating that still resists the tough environment of the track.

Features:
  • Developed for our Grand-Am / Continental race team
  • High grade steel to withstand the extreme abuse of air guns and race conditions
  • Bright yellow zinc plating to help tire changer zoom in on their target quickly and accurately
  • Minimal plating won’t result in excess coating wearing off and “gumming up” the threads
  • 19mm hex to prevent rounding off
  • Rounded top for fast socket engagement
  • Recessed threads to aid in fast nut-to-stud alignment without cross threading
  • We recommend using with Turner Motorsport bullet nose dry-lube wheel studs
    Price is per nut.
  • Turner Motorsport
    Part #: TWH9952R19
    Price: $3.71 (USD) 
    $4.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Professional Quality Deluxe Two Shelf Service Cart

    Having convenient carts make organizing a breeze and passing that on to getting the job done well.

    Features:

    • Beautiful & durable high gloss black powder coated finish
    • 350lbs load capacity supports heavy tools, parts and equipment
    • Dual handles allow Push-Pull from either side for better maneuverability
    • Rugged thru tray frame construction for stable support
    • 3" Deep trays 
    • Large, easy to maneuver 4" ball bearing casters (2 are locking)

     

    Dimensions:

    • Height - 35.3"
    • Length - 30"
    • Width - 16"
    • Weight - 37.5lbs
    Schwaben
    Part #: 005947SCH01A
    Price: $89.95 (USD) 
    $117.95 (Sale - Save 24%)
    In Stock
    Quantity:   
    Schwaben 3/8

    A professional quality ratchet with a fine satin finish for comfort, durability, and easy clean-up.  

    Features:

    • 200mm(7.75") long ratchet
    • Special designed 72T gear mechanism uses only 5 degree handle movement between gears
    • Push button release holds socket tight until you are ready to release. No more dropped sockets

    Limited Lifetime Warranty 

     

    Schwaben
    Part #: 005985SCH01A
    Price: $17.21 (USD) 
    $22.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    N54 Diverter Valve Shims - Set Of Four These shims allow you to manually adjust preload on Forge N54 Diverter Valves.
    Forge
    Part #: FMDV-SHIM
    Price: $3.60 (USD) 
    $4.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    E9X 335i/xi N54 Stage 2 Turner Power Package 2007-2010 E90/E92/E93 335i N54 Stage 2 Power Package (for race-use only)
    Peak Power Gain: up to 115hp / 123ft-lbs
    + aFe Pro5R Dual Cone Intake
    + CP-E Catless Downpipes
    + Cobb AccessPort programmer


    For a 335i race or competition car, the exhaust is an important area for upgrades. Removing the catalytic converters eliminates a choke point in the exhaust system and will free up power and torque. It also eliminates the cats as a potential failure point - a broken up cat can clog the exhaust and severly damage your motor. These cat-less DP from CP-E are some of the best we have seen. They are made from 304 stainless steel mandrel-bent piping. The flow characteristics of the piping was especially important to maximize the efficiency of the turbos. With less restriction the turbos work more efficiently and last longer.

    The aFe Dual Cone intake and Cobb Accessport programmer complete the Stage 2 package. The larger surface area of the aFe cone filters allows more air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with aFe Pro5R filters, mounting shield, intake tubes, sealing materials, hardware, and install instructions. The torque increase and sound from the open intake from low-mid RPM is sensational.

    The Cobb software tool puts multiple tuning stages in the palm of your hand. Our Stage 2 package lines up with the Cobb Stage 2 tuning maps for an intake and DP (91 or 93+ octane fuel). Simply download the Stage 2 race map from the Cobb website, plug it in, and install. Select different maps for other upgrades, throttle settings, octane ratings, valet mode, or revert back to stock! If you're moving among Stages simply download a new file from the Cobb website and update your AccessPort programmer! The AccessPort triples as a diagnostic tester/reader and a data logger. It's the most feature-packed programmer on the market today.

    This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and either e-mailed or faxed to Turner Motorsport before shipping. You can download the waiver here.

    This item fits the following BMWs:
    2007-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
    2007-2010 E92 BMW 335i 335is* 335xi 335i xDrive - Coupe
    2007-2010 E93 BMW 335i - Convertible
    * 335is horsepower gains are lower due to the factory power boost in the "is" package
    AFE
    Part #: E9X-335-N54-ST2
    Price: $1525.42 (USD) 
    $1694.91 (Sale - Save 10%)
    Ships on Dec 29, 2017
    Quantity:   
    E9X 335i/xi N54 Stage 1+ Turner Power Package 2007-2010 E90/E92/E93 335i N54 Stage 1+ Performance Package
    Peak Power Gain*: up to 103hp / 108ft-lbs
    + aFe Pro5R Dual Cone Intake
    + Wagner Front Mount Intercooler
    + Cobb AccessPort programmer


    More power = more heat. It's easy to make more power one time but to continue making that power consistently requires careful planning and design. With the additional boost the air entering the engine is also warmer, making the intercooler more important than ever. In testing, the stock BMW intercooler was quickly overwhelmed and cannot keep the intake air cool enough. The engine computer recognizes that and dials back the boost. A more efficient intercooler will keep boost levels up, delivering consistently higher boost levels. The Stage 1+ package includes a Wagner Evo I plug and play intercooler upgrade. We get great feedback from our customers and technicians about the Wagner FMIC - it's a direct bolt in part using all of the factory piping and it offers 85% more surface area than the factory intercooler.

    The aFe Dual Cone intake and Cobb Accessport programmer complete the Stage 1+ package. The larger surface area of the aFe cone filters allows more air to enter the engine - creating more power and torque, a richer engine sound, and better throttle response. The kit is supplied complete with aFe Pro5R filters, mounting shield, intake tubes, sealing materials, hardware, and install instructions. The torque increase and sound from the open intake from low-mid RPM is sensational.

    The Cobb software tool puts multiple tuning stages in the palm of your hand. Our Stage 1+ package lines up with the Cobb Stage 1 tuning maps for an intake and FMIC (91 or 93+ octane fuel). Simply download the Stage 1+ map from the Cobb website, plug it in, and install. Select different maps for other upgrades, throttle settings, octane ratings, valet mode, or revert back to stock! If you're moving up in Stages simply download a new file from the Cobb website and update your AccessPort programmer! The AccessPort triples as a diagnostic tester/reader and a data logger. It's the most feature-packed programmer on the market today.

    We have taken the guesswork out of choosing the best upgrades for the N54 engine. If you follow the upgrade path we have laid out you will have very satisfying and reliable results. The addition of the larger intercooler makes Stage 1 more enjoyable and won't let you down at the track or dragstrip. * Note that peak power gains are quoted remain the same as Stage 1 but the cooler intake air means there is less of a chance the engine computer will cut power from heatsoak.

    This item fits the following BMWs:
    2007-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
    2007-2010 E92 BMW 335i 335is* 335xi 335i xDrive - Coupe
    2007-2010 E93 BMW 335i - Convertible
    * 335is horsepower gains are lower due to the factory power boost in the "is" package
    AFE
    Part #: TMS224335
    Price: $1561.50 (USD) 
    $1735.00 (Sale - Save 10%)
    In Stock
    Quantity:   
    Tool - 22mm 3/8 Drive 12-point Socket 22mm hex socket with 3/8" drive.
    Turner Motorsport
    Part #: 02010022
    Price: $21.95 (USD) 
    Ships in 3 Days
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 12-19mm Multi size Socket Wrench

    The Schwaben 8-in-1 drain plug socket wrench. Take one wrench that fits most common metric drain plugs with external hexagonal heads. Six-point socket heads grip securely and won’t round off plug heads.

    Features:

    • Made of vanadium steel with polished chrome finish
    • Strong magnet on the side of the handle to hold the drain plug until you are ready to reinstall it
    • Sizes include: M12, M13, M14, M15, M16, M17, M18, and M19
    Schwaben
    Part #: W-136PM
    Price: $14.96 (USD) 
    $19.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 1/2

    Proper torque is very important when it comes to working on engines. The importance comes from proper sealing and to keep from damaging threads.

    Features:

    • Reversible ½-inch drive click-to-stop
    • Torque range of 10 to 150 ft-lb
    • Accurate to within +/-4%
    • 18 inches in length with a convenient carry case
    Schwaben
    Part #: TW-12450
    Price: $29.96 (USD) 
    $39.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    aFe Pro5R Air Filter - E9X 335i/xi E82 135i with N55 engine - 2011+ This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This is designed to be the last air filter your BMW needs, as it is completely washable/reusable, and flows better than the stock paper air filters. On your BMW's N55 turbo 3.0 liter engine, aspiration a BIG factor in producing power -- the better the airflow, the higher the potential power. Replacing your stock paper filter with an AFE high performance cloth/gauze filter takes only minutes and instantly reduces air restriction, for more horsepower and torque.
    ,br>This version used aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.

    This item fits the following BMWs:
    2011+ E82 BMW 135i
    2011+ E90 BMW 335i 335xi 335i xDrive - Sedan
    2011+ E92 BMW 335i 335i xDrive - Coupe
    2011+ E93 BMW 335i Convertible
    AFE
    Part #: 30-10205
    Price: $85.46 (USD) 
    $94.95 (Sale - Save 10%)
    Direct Ship
    Free Shipping Free Shipping
    Quantity:   
    6MM Silicone Vacuum Hose - Black - 9 Feet Car suffering from vacuum leaks? This vacuum hose has a 6mm inner diameter. 
    Forge
    Part #: vc06b
    Price: $15.26 (USD) 
    $16.95 (Sale - Save 10%)
    In Stock
    Quantity:   
    5MM Silicone Vacuum Hose - Black - 9 Feet Car suffering from vacuum leaks? This vacuum hose has a 5mm inner diameter. 
    Forge
    Part #: vc05b
    Price: $12.56 (USD) 
    $13.95 (Sale - Save 10%)
    In Stock
    Quantity:   
    Matte Black Center Grills - E92 E93 03/2010+ (except M3)
    These direct replacement center grills let you eliminate the stock chrome kidney / center grills, feature perfect fit and beautiful finish, and give you a darker more aggressive look. These grilles fit all 3/2010+ E92 3 series Coupe & E93 Convertible. Kit includes two blacked out grills with matte black finish.

    Made from impact resistant long life ABS polymer, these grills are precision crafted for a perfect OEM fit. Unlike some competitors blacked-out grills which have a shiny finish that give off a cheap look and feel, these black grills feature a high quality matte finish reminiscent of genuine BMW parts.

    This item fits the following BMWs:
    3/2010+  E92 BMW  328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive
    ECS
    Part #: BM01-9210-B
    Price: $89.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Radio Removal Tool Kit - 32 Pieces

    The radio removal tool make removal of the stock radio easy, offering just the right design so there is no damage.

    Features:

    • 32-piece Master Radio Removal Kit removes most German radios, plus radios in many Asian and Domestic makes
    • Come in a handy blow-molded case with silhouetted compartments for each tool, making it easy to transport and keep track of individual keys and tools
    • Many keys have comfortable rubber padded grips
    Schwaben
    Part #: AAR-32PCS
    Price: $37.46 (USD) 
    $49.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    E9X M3 Carbon Fiber Front Spoiler Lips (Pair) - All E90/E92 M3 These replica ZCP front lip spoilers provide the look and quality of the original BMW parts but at a fraction of the cost. They fit perfectly and are made of beautiful high quality carbon fiber. These look identical to the font splitters that come on all the 2011 M3 Competition Package models, and they can easily be added to the standard M3 front bumper for the same aggressive (yet factory) look. Set includes one left spoiler and one right lip spoiler. These install with the existing hardware on the bumper but 3M double-sided tape and BMW Betalink adhesive is also recommended. #E9XM3PSPLIT

    These Competition Package front lips fit the following BMWs:
    2008+ E90 M3 sedan
    2008+ E92 M3 coupe
    2008+ E93 M3 convertible
    ECS
    Part #: E9XM3PSPLITKIT
    Price: $273.55 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Telescoping Hood Prop

    It only takes a gust of wind to have your hood crashing down on your head, or if you have a carbon fiber hood and no longer have the gas struts than this could be what you need.

     This hood prop is adjustable, lightweight, and sturdy making it easy to keep out of the way in the trunk so it's there whenever you need it. 

    Schwaben
    Part #: 006056SCH01A
    Price: $14.96 (USD) 
    $19.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Trailer Ramps 5

    Is your trailer door ramp too steep to get your car into the trailer, 

    Load your vehicle safer and easier with Schwaben trailer ramps. Our trailer ramps create a more gradual angle to prevent spoiler damage when loading and unloading vehicle into or out of trailer.

    Features:

    • These ramps work on cars weighing up to 6,000 pounds
    •  Ideal for low ground clearance cars with extra wide tires.
    • Will not scratch or mark your floors!
    • Will not scoot, slip or slide no matter the surface
    • Will not damage trailer door or trailer
    • Light weight at only 15 lbs
    • Highly durable, virtually indestructible, and very stable
    • Ramps have built in straps to allow transport or ability to be hung on the wall.
    • 67" long, 14" wide, 5" tall.

    Note: if your current stock trailer ramps have an additional fold down ramp, we suggest you either fold it up or remove it.

    Schwaben
    Part #: 006167SCH01A
    Price: $231.00 (USD) 
    $308.00 (Sale - Save 25%)
    Ships on Jan 3, 2018
    Quantity:   
    Wheel Chocks - Pair Always make sure to chock your wheels when lifting one end of the car, this ensures the car stays in place and up in the air.
    Schwaben
    Part #: 006190SCH01A
    Price: $24.00 (USD) 
    $32.00 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 2-pc 67

    These ramps never scoot, slip or slide while rolling onto the ramps.All that said means these ramps are easy to drive up on and very safe. Our Schwaben ramps will never scratch or blemish your floors.

    Having ramps to use offers more than just convenience, it offers safety. Laying under a car working is much easier to do knowing the car is resting the wheels on a firm surface.

    Please refer to chart below to see if these 67" Schwaben ramps are right for you vehicle.

    1. Take a yardstick, and wedge it under the front edge of front tire.

    2. Raise it up until it hits the underside of your car( the spoiler)

    3. Measure from the tip of the yardstick to the ground, vertically.

     67 " long,14" wide, 10" lift height, at 15 lbs each and a low 10.8 degree incline.

    If your measurement is 7.25" or greater, you can clear these ramps with no problem. 

     

    For increased safety, use wheel chocks with all Schwaben Ramp products.

    Schwaben
    Part #: 006160SCH01A
    Price: $264.00 (USD) 
    $352.00 (Sale - Save 25%)
    In Stock
    Quantity:   
    Schwaben Locking Hose Clamp Pliers

    These Schwaben flexible reach hose clamp pliers can reach where others can not.

    Feature:

    • Spring loaded clamp with a 24" cable
    • Designed to remove metal or plastic self-tightening hose clamps
    • Work with diameters from 11/16" to 2-1/2" ( 18 to 54mm)

    These pliers feature a spring loaded clamp with a 24" cable and will lock onto the clamp and hold open for easy removal. These pliers are designed to remove metal or plastic self-tightening hose clamps with diameters from 11/16" to 2-1/2" ( 18 to 54mm).

    Schwaben
    Part #: 004170SCH01A
    Price: $29.21 (USD) 
    $38.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Deep Well Impact Socket - 46mm

    This large socket is the perfect tool for axle nuts when servicing the axle shafts or wheel bearings.

    Features:

    • ½-inch drive 46mm 12-point socket
    • Specially hardened to take the added abuse from a impact gun
    • Coated for added protection and so you can tell it apart from non impact rated sockets
    • 75mm depth  to accommodate many applications and different length shafts
    • Made of durable chrome moly steel

     

     

    Schwaben
    Part #: 003302SCH03A
    Price: $14.96 (USD) 
    $19.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Strut Nut Socket - 22mm To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.
    Schwaben
    Part #: 003046SCH01A-04
    Price: $11.21 (USD) 
    $14.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Mechanics Stethoscope

    This tool is ideal for finding unusual vibrations or suspected leaks. 

    Features:

    • Aluminum alloy probe to determine noise location fast
    • Rubber trumpet to check for vacuum leaks and pressure flow noise
    • High quality surgical PCV hose for long life and increased sound definition
    Schwaben
    Part #: 005965SCH01A
    Price: $14.96 (USD) 
    $19.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    ECS Tuning Wheel Spacers - 25mm - 72.6mm CB

    Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

    ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

    ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

     

    This item fits the following BMWs:

    2008-2012 E82 BMW 128i 135 1M
    1988-1991 E30 BMW M3
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2012 E93 BMW 328i 335i M3 - Convertible
    1976-1981 E12 BMW 528i 530i
    1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
    1989-1995 E34 BMW 525i 530i 535i 540i M5
    2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
    1982-1989 E24 BMW 633csi 635csi M6
    2004-2010 E63 BMW 645ci 650i M6
    1981-1987 E23 BMW 733i 735i
    1988-1994 E32 BMW 735i 735il 740i 740il 750il
    1995-2001 E38 BMW 740i 740il 750il
    1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

    Rear Only
    2007-2013 E70 BMW X5M
    2007-2014 E71 BMW X6 xDrive35i X6 xDrive50i X6M

    ECS
    Part #: 001058ecs04-25KT
    Price: $109.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    AFE Twisted Steel Cat-Less Downpipes - E9x 335i E82 135i 2008-2010 (N54)

    The aFe Power Twisted Steel, cat-delete, race down-pipes eliminate the catalytic converters for maximum exhaust flow for the popular BMW 1 series and 3 series with the N54 twin turbo motor. In recent dyno testing, these race pipes produced 17 horsepower and 32 x ft. torque over the factory down-pipes. These high performance race pipes are constructed out of lightweight, TIG-welded, 3 inch, brushed finish, 304 stainless steel and use thick 3/8 inch 304 stainless steel flanges for a leak-free seal and a factory fit.

    All aFe exhaust systems are engineered and manufactured in the Corona, California manufacturing facility.

    Tig-Welded:
    100% TIG-Welded by certified craftsmen for race proven strength and durability. TIG-Welding provides the strongest welds reducing stress cracks.

    Factory O2 Sensor Locations:
    These down-pipes use factory mounting locations for the O2 sensors.

    Hassle-Free Installation:
    All hardware and brackets are included for a hassle-free installation.

    Note: This is a "Race Only" product used solely for competition. Its use is limited to closed-course and open-course racing that is formally sanctioned by a recognized racing organization. Any other use including recreational off-road use could be in violation of local, state and federal laws. A check engine light will emit and aFe recommends using a programmer but it is not necessary.

    This part alters or deletes the emissions equipment on your car, and may not meet emissions standards in all states. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.

    Also Fits:
    BMW 335iS 11-12 L6-3.0L (tt) N54
    1 Series M Coupé (E82) 11-12 L6-3.0L (tt) N54

    AFE
    Part #: 48-36301-1KT
    Price: $629.10 (USD) 
    $699.00 (Sale - Save 10%)
    Direct Ship
    Free Shipping Free Shipping
    Quantity:   
    12x1.5 Extended Wheel Locks For Wheel Spacers These wheel locks are made in extended lengths to work with wheel spacers. This is the standard conical seat bolt in a 12x1.5 thread pitch (most BMWs up to 2012). This is a set of 4 bolts - one bolt per wheel that replaces one of your existing extended wheel bolts. The 9 point socket provides an extra layer of protection for your coveted wheels. Black zinc coating resists rust and corrosion. Choose the wheel locks to work with your wheel spacers from the list below.
    ECS
    Part #: 003901ECSBM
    Price: $34.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    ECS Urethane Transmission Mounts

    A sloppy shifter is one of the common complaints of older BMWs. In addition to the shifter linkage the transmission mounts contribute to rough and clunky shifting. BMW transmission mounts are rubber and get softer over time. This allows the transmission to dance around which changes the geometry of the shift linkage and could make it harder to shift. These urethane transmission bushings are stiffer than the stock rubber mounts and won't let the transmission shift around as much. The round design also has more surface area than the stock mounts which helps spread the load. Because the urethane is stiffer, expect more vibration to make its way into the shift lever area. Engine motor mounts should also be considered as a cause for driveline vibration, transmission movement, and poor shifting. Consider replacing your motor mounts at the same time as your tranny mounts.

    Price is for the pair of transmission mounts with hardware.

    This item fits the following BMWs: 
    1989-1995  E34 BMW  525i 530i 535i 540i M5 
    1992-1998  E36 BMW  318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3 
    1997-2003  E39 BMW  525i 528i 530i 540i M5 
    1999-2005  E46 BMW  323i 323ci 325i 325ci 328i 328ci 330i 330ci M3 
    2008-2012  E82 BMW  128i 135i 1M Coupe 
    2006-2011  E90 BMW  325i 328i 330i 335d 335i - Sedan 
    2006-2012  E91 BMW  328i - Wagon 
    2007-2013  E92 BMW  328i 335i 335is - Coupe 
    2007-2013  E93 BMW  328i 335i - Convertible 
    1997-2002  Z3 BMW  Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe 

    ECS
    Part #: 002705ECS
    Price: $69.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    aFe MagnumFORCE Pro Dry S Stage 2 Intake Kit - E82 128i, E9X 325i/328i/330i This Stage 2 Sealed Intake produces 12HP, 15LBS. x FT. of torque and outflows the factory intake by 56%. This sealed air intake system features a washable/reusable 6" conical air filter with inverted top that improves airflow for increased horsepower, torque and throttle response. The air filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.The sealed housing features two auxiliary air inlet ducts for increased airflow. To finish off your underhood appearance, an attractive vacuum formed ABS plastic cover with carbon fiber finish is used to provide easy access to the filter for servicing and an aggressive look. To complete this system, a dyno tuned molded plastic intake tube with velocity stack adapter replaces the stock intake tract and directs air flow with improved volumetric efficiency for maximum intake velocity.

    Optional Vacuum Formed ABS Carbon Fiber Finish Cover - This intake is topped with a vacuum formed ABS carbon fiber finish cover that seals out hot intake air and provides an aggressive yet elegant look to your 3-series(pictured). Also available in plain black finish (not shown).

    6" Conical Air Filter with Inverted Top - Choose either Pro Dry S performance air filter for maximum convenience or Pro5r oiled filter for maximum flow for increased horsepower and torque.

    Fully Sealed Design - aFe engineers have designed a very sophisticated 2-piece sealed intake that keeps out warm underhood air and brings in cooler, outside air for a denser air intake charge.

    Mounts In Factory Location - aFe has developed this intake to provide a hassle-free installation that utilizes all factory mounting locations.

    Choose from 54-81012 Pro5R kit or 51-81012 ProDryS kit

    This aFe intake fits the following BMWs:
    2008+ E82 BMW 128i
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi - Sedan
    2006-2011 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007+ E92 BMW 328i 328xi 328i xDrive - Coupe
    2007+ E93 BMW 328i - Convertible
    AFE
    Part #: 54-81012-X
    Price: $427.50 (USD) 
    $475 (Sale - Save 10%)
    In Stock
    Turner BMW 15mm Wheel Spacers (Pair) - Most BMWs (see applications)

    15MM (.59 inch) Wheel Spacer for BMW E24, E28, E30 M3, E31, E32, E34, E36, E38, E46, E60, E63, E82, E83, E87, E90, E91, E92, E93 (E9X), Z3, Z4

    Wheel spacers are the ideal solution to resolve a number of fitment and aesthetic problems --

    • Correct wheel offset issues
    • Achieve a flush fitment instead of the "tucked under" look
    • Clearance the wheel from contact with other components (suspension, brakes, etc).
    • Improve handling and stability by increasing track width

    A spacer fits between the wheel and the hub assembly and pushes the wheel out by the thickness of the spacer. Our wheel spacers are compatible with almost any type of BMW wheel and are a direct fit to the wheel hub (see below for any fitment notes). Longer wheel bolts or wheel studs are required.

    These latest generation of the Turner Motorsport Wheel Spacers represent a total redesign of the wheel spacer concept - a ground-up, clean sheet design based on our years of BMW service and motorsports. We took everything we have learned from our service technicians, customers, and race team crew and built the spacer to beat all spacers. We've been in the BMW wheel spacer business probably longer than anybody and when it came time to make our own spacers, a basic spacer design just wouldn't do. We had to make a spacer that is light weight (for lower unsprung mass), has a tough and durable coating to last through our New England winters, is easily removed (your mechanic will thank you), and is precisely engineered and manufactured for a proper fit on the hub and in the wheel. You won't find a better engineered wheel spacer on the market!

    Turner Wheel Spacer Features --
    + hub-centric design, 1-piece spacer
    + precise tolerance fitment thanks to CAD process and CNC mill machine
    + aerospace grade aluminum  light weight but very strong with a high resistance to corrosion
    + additional military-spec hardcoat for further corrosion resistance
    + innovative Quick Release pockets for easy removal (better than a chamfered back edge)
    + laser engraved size and part number for easy identification
    + stealthy anthracite or black color
    + extended bolt sets in factory-matching black or bright silver finish available (wheel stud kits also available)
    + Turner Motorsport track and street tested!
    + Made in the USA

    Extended Wheel Bolts
    Longer wheel bolts or wheel studs are required for all BMW wheel spacers. Spacers cannot be used with stock bolts. Our extended lug bolts are a very high quality and high grade steel lug bolt (grade 10.9). We offer two finishes to get you just the right look with your wheels - black zinc to maintain a factory BMW appearance or a bright zinc nickel finish to go with polished wheels. Zinc finishes are designed to withstand 700 hours of salt spray testing.

    Spacer Specs:
    (click to expand)
    Spacer Specs:
    bolt pattern:5 x 120
    center bore:72.6mm
    hubcentric?yes
    wheel pad size:normal

    Year & Model Applications
    (click to expand)
    2008-2012 E82 BMW 128i 135 1M
    1988-1991 E30 BMW M3
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2012 E93 BMW 328i 335i M3 - Convertible
    1976-1981 E12 BMW 528i 530i
    1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
    1989-1995 E34 BMW 525i 530i 535i 540i M5
    2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
    1982-1989 E24 BMW 633csi 635csi M6
    2004-2010 E63 BMW 645ci 650i M6
    1981-1987 E23 BMW 733i 735i
    1988-1994 E32 BMW 735i 735il 740i 740il 750il
    1995-2001 E38 BMW 740i 740il 750il
    1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
    Turner Motorsport
    Part #: TWH9905015
    Price: $89.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Motive Power Brake Bleeder Tool (Fits most European Cars) The best way how to bleed the brakes on a BMW for the do it yourself BMW owner!

    The Motive Products POWER BLEEDER is the number 1 selling DIY pressure brake bleeder. It operates just like the professional mechanics' tool at a fraction of the price. The bleeder works by attaching to your brake fluid resevoir and pressurzing your brake system as well as supplying more fluid as needed. It essentially simulate the old fashioned "2 man" brake bleeding technique, only without the need for a second person. Not sure how easy it is? Watch the video to the right and see how simple it is!
    Video: How To Bleed BMW Brakes


    The Motive Brake Bleeder works on most European cars, including Alfa Romeo, Audi, BMW, Fiat, Mercedes, Peugeot, Porsche, Renault, SAAB, Volkswagen, Volvo, and all other cars with 45mm threaded hydraulic fluid reservoir caps All bleeders come with a full 1 year warranty. 2 Quart Capacity. Don't be fooled by cheap imitations!

    Choose from either the standard bleeder or premium Black Label Bleeder.
    Standard Bleeder - has a plastic reservoir cap and non-swivel fitting.
    Black Label Bleeder - comes with custom machined aluminum cap and deluxe swivel fitting, an extra length of high grade polyurethane tubing that won't cloud or crack with exposure to brake fluid.

    This brake bleeder fits the following automobiles:
    BMW, Audi, Alfa Romeo, Fiat, Mercedes Benz, Peugeot, Porsche, Renault, Saab, Volkswagon, & Volvo.
    Motive
    Part #: MOT-0100x
    Price: $43.66 (USD) 
    $53.95 (Sale - Save 19%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Genuine BMW 6 Piston Front Brake Upgrade Kit for E82/E88 and E90/E91/E92/E93 Convert your 2006+ 3 series or 1 series brakes to the massive 135i front brake setup, which has 6-piston Brembo calipers and 338mm (13.3") rotors! This kit includes everything you need to upgrade your front brakes to Genuine BMW 135i components, including calipers, caliper brackets, rotors, retaining screws and stock BMW pads. The caliper brackets bolt to your existing spindle, and the backing plates are conveniently the same for all the cars this kit fits. This brake upgrade is a great combination of high quality factory BMW components, and a price tag that is very attractive when compared to the other popular "big brake kits". Please note, these brakes require the use of 18" or larger wheels. Some 17" wheels may fit, but we can not guarantee fitment on any particular 17" wheel at this time. Any wheel that fits 135i wheel work with these brakes.

    This 135i front brake conversion kit fits the following BMWs:
    2006+ E90 3 Series Sedan - 325i, 328i
    2006+ E91 3 Series Wagon - 325i wagon, 328i, wagon
    2007+ E92 3 Series Coupe - 328i
    2007+ E93 3 Series Convertible - 328i Convertible
    2008+ E82 1 Series Coupe - 128i
    2008+ E88 1 Series Convertible - 128i Convertible

    Genuine BMW
    Part #: TMS1891
    Price: $1566.63 (USD) 
    Direct Ship
    Free Shipping Free Shipping
    Wheel Bolt for BMW, MINI - 12x1.50 - Black Chrome - fits most BMWs (see list) These 'show quality' black chrome wheel bolts have a satin/luster finish to them that looks better than most other finished bolts, including the factory bolts. The bolt head is also finished off better with a rounded head instead of recessed. If your wheels are perfect, your bolts should be too! These are high grade (10.9) 12x1.50 bolts, in the same size as the stock bolt or to be used with a small 5-8mm spacer.

    Price is per bolt (each). You can enter your quantity after pressing the Update Price button below or from the shopping cart.






    + Emblem Application Specifics
    (click here to check your car)
    These black satin wheel bolts fit the following BMWs:
    2008-2012 E82 BMW 128i 135i 1M Coupe
    1984-1991 E30 BMW 318i 318is 318ic 325e 325es 325i 325ic 325is 325ix M3
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2013 E93 BMW 328i 335i M3 - Convertible
    1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
    1989-1995 E34 BMW 525i 530i 535i 540i M5
    1997-2003 E39 BMW 525i 528i 530i 540i M5
    2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
    1982-1989 E24 BMW 633csi 635csi M6
    2004-2011 E63 BMW 645ci 650i M6
    1988-1994 E32 BMW 735i 735il 740i 740il 750il
    1995-2001 E38 BMW 740i 740il 750il
    1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    2000-2003 E52 BMW Z8 Roadster
    2002-6/2006 R50 MINI MINI Cooper
    2005-6/2006 R52 MINI MINI Cooper Convertible, MINI Cooper S Convertible.
    2002-6/2006 R53 MINI MINI Cooper S
    Turner Motorsport
    Part #: TMS16545
    Price: $6.25 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Turner Motorsport Blipshift Z4 Racecar T-Shirt - Black Your 328i may not yet be a full blown GT racecar, but adding that short shift kit gets you one step closer. Monday morning's 5 minute long red light is a chance to daydream of the 180mph high banks of Daytona! Every mod is a life enhancement with daily rewards.

    Introducing the winner of the Racing Bimmers Tee Design Contest by Blipshift honoring Turner Motorsport's continued success with BMW racecars! From e30s to last season's monster Z4, Turner has stayed true to BMWs since 1993, amassing 7 championships.

    Congrats to Anthony, winner of the Pit Crew Experience with the Turner team this season at Mazda Raceway Laguna Seca!

    Only available at TurnerMotorsport.com. Choose from Fitted T-shirt or Beefy T
    Turner Motorsport
    Part #: BS-Z4-FITTED
    Price: $12.00 (USD) 
    $19.95 (Sale - Save 40%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    E9X M3 HRE FF01 20 E9X M3 HRE FlowForm 20" Wheels
    Fr: 20x9.0" ET25 25.8lbs
    Rr: 20x10.5" ET26 28.0lbs

    HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

    HRE FF01 FlowForm wheels are a Y-spoke design instantly familiar and at-home on BMWs. The FF01 closely resembles the famous CSL or ZCP factory designs but with distinct details and more desirable sizes and offsets. FF01 wheels are available in 19" and 20" sizes that fit with the proper offset (no spacers required). Concave centers emphasize the muscular and athletic stance while two standard and eleven optional finishes trigger the visual impact.

    The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

    HRE FlowForm Wheel Features -
    + state-of-the-art technology
    + lighter and stronger than a cast wheel
    + stimulating looks
    + multiple color and finish options encourage personalization
    + lifetime structural warranty
    + TUV, VIA, and JWL approved

    Colors and Finishes -
    Standard Colors


    Optional Colors (+$500)


    This item fits the following BMWs:
    2011-2011 E82 BMW 1M Coupe
    2008-2011 E90 BMW M3 - Sedan
    2008-2013 E92 BMW M3 - Coupe
    2008-2013 E93 BMW M3 - Convertible
    HRE
    Part #: TMS212689
    Price: $2160.00 (USD) 
    $2700 (Sale - Save 20%)
    Direct Ship
    Turner Performance Software for E9X 328i (SULEV)

    MORE POWER, IMPROVED EFFICIENCY!!
    Max HP gain = 15 hp
    Max Trq gain = 12 ft-lbs
    Rev Limit = 7000 RPM

    Our software fully maximizes the N51 engine in the 328i while in SULEV spec (Super Ultra Low Emission Vehicle). The stock BMW software is hampered by settings for 87 octane fuel. By re-mapping the engine programming for 91 octane, we can make more power, torque, and improve fuel mileage - all without harm to the engine or affecting driveability. We have paid particular attention to increasing low and mid-range torque. The throttle response is also improved (quicker) eliminating unwanted and dangerous flat spots in the pedal response.

    This software file is for the N51 engine SULEV model only. SULEV is a specification used in some parts of the US where emissions compliance is critical (mostly in California, the Northwest, and the Northeast). The computer and engine specs are different than the 'regular' 328i N52 engine.

    There are two ways to install our software: mailing the ECU to us for a reflash or do-it-yourself install with our Turner Flash tool:

    Mail-In Reflash - lower upfront cost but additional shipping charges. Minimum downtime of at least three days. We have a 24 hour turnaround on shipping the ECU back to you but factor in transit time. Expert installation of your software at our facility.
    Turner Flash DIY tool - higher upfront cost but files are emailed back and forth. No downtime - you can still drive the car while we process your tune. Files are emailed back and forth - your stock file comes to us, a tuned file is returned to you. Easy install via Windows laptop using these instructions (click here).

    Should you choose to mail your ECU to us, follow these specific instructions on shipping the computer (click here). We will provide you a free Next Day Air shipping label to get your ECU to us quickly - and returned just as fast. We will contact you to arrange a time to ship in your ECU to further minimize downtime.


    This item fits the following BMWs:
    2007+ E90 BMW 328i 328xi 328i xDrive - with N51 SULEV engine - Sedan
    2007+ E91 BMW 328i 328xi 328i xDrive - with N51 SULEV engine - Wagon
    2007+ E92 BMW 328i 328xi 328i xDrive - with N51 SULEV engine - Coupe
    2007+ E93 BMW 328i - with N51 SULEV engine - Convertible

    Turner Motorsport
    Part #: AN51-328
    Price: $459.00 (USD) 
    Ships in 2 Days
    Free Shipping Free Shipping
    E90/E92 325i/328i/330i/335i H&R Coil Over Suspension

    The H&R Coil Over kit takes the traditional shock/spring package one step further. H&R combines their progressive-rate springs with specially valved shocks and adds height adjusters that let you set the ride height to your own personal tastes. These coil overs are designed for street use with progressive rate springs that start out soft and stiffen as they are compressed. This helps to keep the ride compliant while still giving better handling and balance.

    H&R designs each suspension to work as a coil over. This means that the correct amount of travel has been built into each shock. And the shocks are valved specifically for the spring rates to give a tight and controlled ride without being harsh or ultra-stiff. Each H&R coil over is TUV tested and approved and meets ISO quality standards. These are

    SPECIAL PRICING FOR A VERY LIMITED TIME!
    FREE GROUND SHIPPING

    used with the stock strut and shock mounts for a quick and easy install.


    Height adjustment range:
    F: -1.25-2.5"
    R: -.75-2.0"

    SPECIAL PRICING FOR A VERY LIMITED TIME!

    This coilover kit fits the following BMWs:
    2006-2011 E90 BMW 325i 328i 330i 335d 335i - Sedan
    2007-2012 E92 BMW 328i 335i 335is - Coupe
    2007-2012 E93 BMW 328i 335i - Convertible

    H&R
    Part #: 29177-1
    Price: $1499.95 (USD) 
    $1680 (Sale - Save 11%)
    Direct Ship
    Free Shipping Free Shipping
    Schwaben 3pc Professional Hammer Set

    Every now and then you just need a hammer to get the job done. Ensure that your hammers are high enough quality to stand up to the demands of the job!

    Included in this set:

    • 8-oz Ball Peen Hammer 
    • 16-oz Ball Peen Hammer 
    • 36-oz Dead Blow Hammer

    The 8 and 16 oz Ball Peen hammers are constructed with a fiberglass handles with a molded rubber grip. The heads are made from drop forged steel to avoid damage and to stand up to long years of impacts. Each side is precision ground for accurate striking points.

    The 36 oz dead blow hammer is built with steel shot internals that delivers a stronger force of impact and prevents rebound. The hammer itself is all built from a high-impact poly jacket that encases the head and handle. This hammer allows you to hammer softer metals, such as aluminum, without damaging the surface or the part itself. The handle has a diamond-shaped grip pattern to prevent your hands from slipping and sliding, even with your hands are covered with oil.

    Schwaben
    Part #: 016805sch01aKT
    Price: $22.46 (USD) 
    $29.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 8oz Ball Peen Hammer The 8oz Ball Peen hammers are constructed with a fiberglass handles with a molded rubber grip. The heads are made from drop forged steel to avoid damage and to stand up to long years of impacts. Each side is precision ground for accurate striking points.
    Schwaben
    Part #: 016805SCH02A
    Price: $7.46 (USD) 
    $9.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Turner Polyurethane Shifter Arm Carrier Bushing - E36 E46 E9X F30 F32 E39 E60

    Even after rebuilding your manual transmission shifter with brand new BMW components or installing a short shift kit, your shifts will still be at the mercy of soft factory bushings. Designed with 100% comfort and low manufacturing costs in mind, BMW's factory carrier bushing offers a freedom of movement on all axis, resulting in "factory installed slop". Any manual transmission aficionado knows that when it comes to shifting, slop is the enemy. Causing inconsistent gear locations, embarrassing missed shifts, and an overall experience that is less than confidence inspiring. After servicing countless shifters, our team decided to step in and address this shortcoming. 

    Our engineers designed a bushing that was simple to install, requiring no modifications or reuse of old components, and delivers an improved shifting experience with any factory or aftermarket performance shifter. Our carrier bushing is manufactured in the USA from 70A polyurethane, bonded securely to a 304 stainless steel housing for exceptional corrosion resistance.  The result is a complete design solution that offers much crisper shifting and a more engaging driving experience with nearly zero added gearbox noise or vibrations. 

    As part of a shifter upgrade, rebuild, or as a standalone component upgrade, our bushing assembly delivers immediate, long-lasting shifting improvements.

    **Installation instructions**

    Features:

    • Corrosion resistant 304 stainless steel mounting sleeve with bonded 70a polyurethane
    • Stiffer bushing results in crisper shifter feel and a more engaging driving experience.
    • Ready to install out of the box - no modifications required
    • Replaces Genuine BMW part number 25111220707
    • Improved durability over OEM rubber
    • Made in America

    Have an older BMW? Our shifter carrier bushing upgrade for older models offers similar performance for your classic BMW and can be found here. 

    This item fits the following BMWs:
    2008-2013 E82 BMW 128i 135i 135is 1M Coupe
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2013 E93 BMW 328i 335i 335is M3 - Convertible
    2015 F80 BMW M3
    2012-2015 F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan
    2014-2015 F34 BMW 328i xDrive GT - Gran Tourismo
    2013-2015F32 BMW 428i 435i 435i xDrive - Coupe
    2013-2015 F33 BMW 428i Convertible 435i Convertible - Convertible
    2014-2015 F36 BMW 428i Gran Coupe 435i Gran Coupe
    2015 F82 BMW M4
    1997-2003 E39 BMW 525i 528i 530i
    2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
    2011+ F10 BMW 535i 550i M5
    2004-2010 E63 BMW 645ci 650i M6
    2012+ F12 BMW 650i M6
    2013+ F06 BMW M6 Gran Coupe
    2013+ E84 BMW X1 xDrive28i
    2004-2010 E83 BMW X3 2.5i X3 3.0i X3 3.0si
    1996-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    2009+ Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

    Turner Motorsport
    Part #: 021012TMS02
    Price: $32.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    HARD Motorsport Trunk Floor Filler Plate - E9x E82 BMW

    If cutting weight is your main priority, this Trunk Filler Plate is exactly what you need. You can eliminate the carpet and excess plastic and parts without leaving a gaping hole in your trunk. This is a simple drop-in solution that can be easily modified.

    Features:

    • Laser cut .060 Aluminum
    • Contoured for added strength and rigitity
    • Easy Modification

     

    Fits the following vehicles:

    E9X BMW M and Non-M Chassis

    E82/E88 BMW All submodels

    HARD Motorsport
    Part #: TRUNKFLR.E90
    Price: $63.00 (USD) 
    $70.00 (Sale - Save 10%)
    Direct Ship
    Free Shipping Free Shipping
    Quantity:   
    HARD Motorsport Tow Hook Arrow Sticker

    Most track/race organizations require a sticker pointing out your tow hook. Hard Motorsport offers these to be purchased in addition to their tow hook mounts.

     

    Fits all BMW vehicles.

    HARD Motorsport
    Part #: HARD.TOWSTICKER
    Price: $4.50 (USD) 
    $5.00 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    E9X M3 Modified Subframe For Use With Turner Racing Front Sway Bar

    Fitment of the ultimate M3 front sway bar (the Turner Motorsport Racing-Blade Style, that is) requires modifications to be made to the front subframe for proper clearance. We've taken half of the effort out by offering a modified subframe for ease of installation. By utilizing this subframe in concert with our racing sway bar kit and a dry sump oiling system, your track or race car is a step closer to a dialed-in front end.

    This subframe includes reinforcing gusseting for the lower control arm mounts and other improvements from our racing department. 

    See T340455 for this subframe with our sway bar kit.

    $627.07 core charge is included in this price and is refunded on receipt of your original subframe.

    Turner Motorsport
    Part #: tga2283440kt
    Price: $1441.36 (USD) 
    Ships in 3 Days
    Quantity:   
    E9X M3 Carbon Fiber Front Lip Spoiler - CRT Style In 2012 BMW announced the M3 CRT Lightweight Sedan, CRT standing for Carbon Racing Technologies, featuring a weight savings of over 150 lbs through the extensive use of carbon fibre parts. One of the new parts introduced on this model was a carbon fiber front lip spoiler that inspired the design of our newest offering. This spoiler fits directly to the stock front bumper and provides additional downforce and a more aggressive look.

    This item fits the following BMWs:
    2008-2011 E90 BMW M3 - Sedan
    2008-2013 E92 BMW M3 - Coupe
    2008-2013 E93 BMW M3 - Convertible
    ECS
    Part #: BM-0014
    Price: $395.95 (USD) 
    Direct Ship
    Quantity:   
    Schwaben Aluminum 3-Ton Jack Stands - Pair

    Safety is always the most important factor when it comes to working under your car, jack stands are highly recommended. 

     

    Features:

    • Ultra light  jack stands only weigh 4.7 lbs each
    • All aluminum construction with heavy-duty  flanged bases to safely stabilize loads
    • 6 locking positions for a secure load in multiple heights
    • Extra heavy duty load pin at .584 in. diameter with a posi lock ball to insure it stays in place
    • Min. Height is 10.6
    • Max Height is 15.4"
    • Large 7" diameter base
    • Outer support tube is 2-1/8" in diameter

     

    Schwaben
    Part #: 005945SCH01A
    Price: $64.46 (USD) 
    $85.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Universal Adapter Kit For Brake Bleeding This adapter is for use with the 3-Liter Multi-Functional Fluid Pump Kit  and  3-Liter European Pressure Brake Bleeder  only and allow for fitment on other brake fluid reservoir fitment. 
    Schwaben
    Part #: 007311SCH04A
    Price: $14.96 (USD) 
    $19.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Telescoping Round Mirror

    Great for working in tight spacers when you can't get a good eye on the issue.

     

    Features:

     

    • Offers an 9-1/2" to 29" extendable handle with a stainless steel shaft
    • 2-1/4" mirror head mounted on a dual swivel for a full 360 degree rotation
    • Cushion grip rubber handle works great with dry or oily hands
    Schwaben
    Part #: 010772SCH01a
    Price: $7.46 (USD) 
    $9.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 12 Ft 6 Gauge Booster Cables Looking for a high quality set of jumper cable to keep around for emergencies? These are it, don't settle for cheap budget sets found at most places.
    Schwaben
    Part #: 007269SCH01
    Price: $20.21 (USD) 
    $26.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    E60 Xi, E82 1M, E84 X1, E9X 335/M3 Front Cool Carbon S/T Performance Brake Pad Set

    Cool Carbon S/T brake pads have excellent stopping power and feel with low levels of dust and noise. Engineered for European cars with high speed development on the Autobahn, Cool Carbon is a sporty compound intended for every day use. The S/T compound has more stopping power and initial bite than stock thanks to a higher coefficient of friction and composite materials. We are big fans of these as a sporty street pad and recommend them for medium-aggressive street driving and autocross.

    • High performance for street use
    • Excellent friction/torque at various temperatures
    • Great feel and modulation
    • Low noise
    • Low-medium dust
    • rotor friendly

    Cool Carbon pads are sold as a set for each axle (4 pads total).

    This item fits the following BMWs:
    2011 E82 E88 BMW 1M Coupe
    2006-2011 E90 BMW 335d 335i 335xi M3 - Sedan
    2007-2013 E92 BMW 335i 335is 335xi M3 - Coupe
    2007-2013 E93 BMW 335i 335is M3 - Convertible
    2004-2010 E60 BMW 525iA 525xi 528xi 530xi 535xi
    2011-2015 E84 BMW X1 xDrive35i

    Cool Carbon Performance
    Part #: 7799-D918
    Price: $115.15 (USD) 
    $127.95 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 6 Liter Fluid Extractor/Filler System

    6-Liter Extractor/Filler System makes oil, ATF or any type of fluid change a snap. Easily change to pump-in/out with the flip of a lever.

    Features: 

    • Extendable foot step for stable use when pumping
    •  All adapters mount on the tank for convenient storage of the 9 included adapters
    • 5-foot main tube features a quick disconnect and shut off valve
    • Included is a 24" long and 3/8" OD tube with quick connect nipple
    • Manual pump and requires no electricity or air pressure to operate
    • Extract up to 6-Liters of new fluid from barrel, bucket or bottle into the tank, turn handle to out position to fill into your vehicle

     

    Now Available:  Optional Dipstick extracting tube set 

    Schwaben
    Part #: 007221SCH01A
    Price: $127.46 (USD) 
    $169.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 3-Liter European Pressure Brake Bleeder

    We know bleeding brake alone is not only no fun, but much more complicated than it needs to be. Having a pressure bleeder give you the ability to keep pressure on the brake system while you go under and crack open the bleeder screws to relieve the air pockets.

     

    Features:

    • Holds a full 3-Liters ( 3.17 qts) of brake fluid
    • Easy to read 0-30 lbs pressure gauge built into the tank top
    • Pressure relief valve for safe release of pressure
    • 40" hose with detachable swivel fitting
    • Do not  exceed 20 PSI
    • One-year warranty
    Schwaben
    Part #: 007237SCH01A
    Price: $37.46 (USD) 
    $49.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Liqui Moly Top Tec 4100 5w-40 Engine Oil - 5 Liter

    Using a combination of unconventional synthetic base oils and the latest additive technology, this state of the art engine oil is perfect for gasoline and diesel engines equipped with a particulate filter and extended maintenance intervals. This provides exceptional wear protection and helps reduce oil and fuel consumption all while providing fast oil penetration.

    Properties:

    • Smooth engine running characteristics
    • Long engine service life due to exceptional protection against wear
    • Rapid oil delivery at low temperatures
    • Optimum oil pressure at all engine speeds
    • Premium lubrication reliability at high and low temperatures
    • High shear and ageing stability
    • Reduces fuel consumption and pollutant emissions
    • Outstanding engine cleanliness
    • Tested with catalytic converters and performance proven with turbochargers

    Approved for the following specifications:

    • ACEA C3
    • API SN / CF
    • BMW Longlife-04
    • MB-Approval 229.31
    • Porsche A40
    • VW 505.00 / 502.00 / 505.01

    Recommended for the following specifications:

    • ACEA A3 / B4

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Liqui-Moly
    Part #: 2330
    Price: $35.96 (USD) 
    $39.95 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 7mm Hose Clamp Flexible Driver

    Makes those hard to reach hose clamps much easier to loosen up.

    Features:

    • 7mm driver
    • 6"  flex shaft
    • Overall length of 10-1/2"
    • No-slip grip resistant to wet or oil coated hands

     

    Schwaben
    Part #: 010658SCH01A
    Price: $8.21 (USD) 
    $10.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    E82/E9X ECS Tuning 28/15 Performance Sway Bar Kit

    To reduce the understeering affects of a staggered wheel setup you want a balanced set of sway bars. ECS has configured this anti-roll bar set for E82 1-series and E9X 3-series with a 28mm front bar and a 15mm rear bar. This kit is designed to help reduce the amount of body roll when cornering and enhance response when turning. These anti-roll bars include urethane bushings with a reinforced inner liner that eliminates squeaks and doesn't require lubrication. The bars are powder coated for durability and good looks.

    These bars fit in the stock locations using the existing brackets and links. Adjustable links are not required but recommended if the car is lowered or if you have coil overs.

    This item fits the following BMWs: 
    2008-2013 E82 E88 BMW 128i 135i 1M Coupe
    2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
    2007-2011 E91 BMW 325i 328i - Touring Wagon
    2007-2013 E92 BMW 328i 335i 335is M3 - Coupe
    2007-2013 E93 BMW 328i 335i 335is M3 - Convertible

    ECS
    Part #: 007278ecsKT1
    Price: $369.95 (USD) 
    In Stock
    Quantity:   
    Schwaben 4 Pc Plier Set

    Having a nice set a pliers can make a big difference on the ease of getting the job done. Schwaben pliers are designed around comfort and keeping them clean.

    Features:

    • 7" Diagonal cutter pliers
    • 8" extra long needle nose pliers with cutter and round jaw grip.
    • 8" Slip joint pliers has two settings
    • 10" Groove joint pliers with 4 settings
    Schwaben
    Part #: 008927SCH01A
    Price: $35.21 (USD) 
    $46.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 3-piece Euro Style Locking Plier Set

    No more pinched fingers or dropping as they unlock. This style locking lever is all one hand operation. Can be unlocked with lower finger while still gripping plier. Others require a two hand operation.

    Features:

    • 7" Straight Jaw Locking Pliers
    • 7" Curved Jaw Locking Pliers
    • 6" Needle Nose Locking Pliers
    Schwaben
    Part #: 008917SCH01A
    Price: $23.96 (USD) 
    $31.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    ECS Tuning N54 Baffled Oil Catch Can System - E9x, E8x

    Modern day emissions regulations require the use of a closed crankcase ventilation (PCV) system to recirculate combustion blow-by gases from the crankcase back in to the intake to be burned.  Unfortunately, these blow by gases contain water vapor (which is a byproduct of combustion) and pick up oil mist from and the windage cloud and cam lubrication system as they travel through the crank case.  Due to less than 100% effective air/oil separation in the stock PCV system, some oil mist and water vapor gets carried back to the intake tract and over time cause oil deposits and carbon buildup in the intake manifold, intake ports, and on the back of intake valves.  All will eventually lead to poor performance and reduced fuel economy, and the presence oil mist can in the intake charge even increase the risk of engine damaging detonation. 

    With direct injected engines this problem becomes more prevalent, and the N54 in your 135i or 335i is no exception.  We're seeing a lot of N54 powered cars with drivability and performance issues due to significant carbon buildup in the intake ports and backs of intake valves.  The “factory fix” is a walnut blasting service that commonly needs performed every 30,000 to 70,000 miles.  Don't be part of this statistic!  Our shop recommends an oil catch can be installed in-line in the PCV system to help reduce the build-up of performance robbing deposits and greatly reduce the need for costly walnut blasting service and related repairs in the future.

    The ECS Engineers were able to get more effective results compared to the competition by routing all blow by gasses through the high-load PCV circuit to ensure the catch can is functioning under all engine operating conditions.  The catch can utilizes a strategically designed 4 chamber baffle plate system engineered to create multiple changes in the direction of airflow to cause oil droplets to fall out of suspension, maximizing the efficiency of the PCV air/oil separation.  A dipstick is integrated into the cap so you can monitor the oil level, and the can is easily serviced.  At each oil change simply unscrew the canister and empty the trapped oil with your regular used oil.  The ECS Oil Catch Can is CNC machined from billet 6061-T6 aluminum and with a stealthy black anodized finish for lasting durability and appearance, and includes everything needed for an OEM-like fully reversible installation.  Having a kit designed specifically for your E8X 135i or E9X 335i makes for a clean looking setup that any skill level mechanic can install. 


    The ECS Oil Catch Can is made from aluminum and with a stealthy black anodized finish. The location is key as heat will evaporate the oil and send too much vapor back into the engine (where cooler air will turn it back into fluid). The ECS OCC also has a factory-like appearance. Having a kit designed for the E9x 335 makes install easy and clean looking so any skill level mechanic can end up with professional results.

    Note: Since the crankcase vent system is considered part of the overall emissions system, installing this may be a violation of local, state, and federal laws. While exemptions are made for track/race and off-road use, check with your local state inspection facility on using this in street-driven vehicles.

    ECS Oil Catch Can Features:
    + Increases air intake efficiency
    + Promotes engine longevity
    + 4 chamber design promotes excellent air/oil separation
    + Large In/Out ports (no tapered sizes that slow flow)
    + Anodized black lightweight aluminum
    + Made in USA

    This item fits the following BMWs with the N54 twin-turbo engine:
    2007-2010 E9X BMW 335i 335xi
     

    ECS
    Part #: 003779ECS
    Price: $189.95 (USD) 
    Ships on Dec 20, 2017
    Free Shipping Free Shipping
    Limited Edition #96 Turner Motorsport M6 GT3 Minichamps - 1 Of 402

    Turner Motorsport was created with the vision of bringing ultra high performance BMW accessories to avid enthusiasts at a reasonable price. Will Turner opened the doors to his 6500 square foot R&D facility in 1993 - since then the company has seen incredible growth and accomplishment. Most recently, Turner Motorsport participated in the IMSA United Sportscar Championship. Drivers Jesse Krohn and Jens Klingman were able to pilot the Number 96 Turner Motorsport M6 GT3 through the pack and finish fourth overall during the 2017 season.

        While not on the racetrack, the team at Turner can be found designing and testing new products perform just as well on the track as they do on the street. For example, Turner’s E46 rear subframe reinforcement kit resolves a real world problem, the E46’s rear subframe mounting points, by creating a solution that prevents further damage and can be used to remedy and already cracked subframe area. In this way, an extremely detrimental problem can be repaired or prevented no matter what type of driving style the vehicle endures. This is just one example of the philosophy behind Turner Motorsport being put to work in every product they design.

        When it comes to sourcing elusive motorsport specific parts, Turner delivers again. As an authorized dealer, Turner carries a wide range of racing specific parts from BMW Motorsport. Anything from full conversions, such as the M235iR conversion kit, to the more esoteric offerings like the E30 M3 Evo racing pulley kit.

        Now you can bring home a piece of Turner Motorsport History with this beautifully constructed diecast model of the Turner M6 GTD car. This is the same one driven by Jens Klingman and Bret Curtis at Circuit of the Americas in the 2016 season. Accurate and breathtaking detail are at the forefront of this limited edition 1/43 scale model. Only 402 are left so get yours before the checkered flag drops!

     

     

    Turner Motorsport
    Part #: 96M6GTSMINICHAMP
    Price: $84.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Driveshaft - E9X 328i Manual Transmission

    Got a vibration through the driveline on your BMW? Did you know that the u-joints are not replaceable on a factory driveshaft?Our remanufactured driveshafts allow for future replacement of u-joints and are rebuilt to a higher specification than the factory driveshaft.We start with OEM u-joints and then machine yokes onto the driveshaft to allow for future u-joint replacement.All bushings, universal joints, center bearings are replaced with new hardware (flex discs are not included but available separately).The whole unit is then dynamically balanced on a precision Axiline Balancer.

     

    Included in the price of the driveshaft is the core charge of $75 and a UPS return label, so you can return your core for refund quickly, easily and without additional expense.

    This item fits the following BMWs:

    2006-2013 E9X BMW 328i w/ Manual Transmission

    Turner Motorsport
    Part #: 907xKT
    Price: $480.05 (USD) 
    In Stock
    Quantity:   
    Turner Motorsport Reverse Flow 6oz Baffled Catch Can

    When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

    Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain hole can be used with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

    Features:

    • 6061-T6 billet machined body, anodized black for lasting protection and appearance
    • Strategically positioned 4 chamber baffle system maximizes oil / air separation 
    • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
    • Sealed with a pre-installed viton O-Ring
    • Includes 2.5mm allen key to remove baffle plates for cleaning
    • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
    • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
    • Optional use drain hole (valve and hose sold separately, watch for our model specific drain kits!)
    Turner Motorsport
    Part #: 022798TMS01-04
    Price: $139.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Turner Motorsport DCT Shift Paddles

    The DCT transmission is a truly amazing part of M performance, finally making it a tough choice between buying and automatic or a manual. Turner found room for some improvement to enhance the performance felt at your fingertips. The engineers at Turner designed these paddles to be more comfortable, better looking, and easier to grip, making this a perfect product for any type of driver. Being smooth is a feature we took pride on to offer a more natural appearance and for the ultimate comfort while shifting. Neoprene pads were also designed to reduce temperature shock from the car sitting in extreme temperatures as well as being able to maintain grip even if your hands are getting a bit sweaty.

    Offered in three colors to match you and your car:

    • Brushed Aluminum
    • Black Anodized
    • Natural
    • Includes new mounting hardware
    • Neoprene shift pads (optional)

     

    Fits the following BMW models:

    2008-2013 E90 M3 Sedan with DCT transmission
    2008-2013 E92 M3 Coupe with DCT transmission
    2008-2013 E93 M3 Convertible with DCT transmission
    2010-2013 E70 X5M 
    2010-2013 E71 X6M 

    Turner Motorsport
    Part #: 013224TMS
    Price: $169.90 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Schwaben 3/8

    Looking to update your old torque wrenches? The Schwaben 3/8" Drive Digital Torque Wrench is your answer. 

    This digital torque wrench uses an easy-to-read display to show torque amounts and settings, features a push button release, reversible 3/8" drive, 45 tooth ratchet head, and a comfortable no-slip grip and adjustment wheel.

    Specifications:

    • Setting Range: 15-80 ft lbs (20-110 Nm)
    • Display Units: ft-lbs, N-m, Inch-lbs, cm-kg2, and m-kg
    • Size: 16" (370mm) length
    • Accuracy: +- 3%
    • Include blow molded holding case
    • Requires one 3V CR2030 battery (included)
    Schwaben
    Part #: 023382SCH01A
    Price: $82.46 (USD) 
    $109.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    GruppeM 70mm Titanium Exhaust System  --  BMW E92 E93 M3

    GruppeM designs some of the highest quality intakes and exhaust on the market. Using advanced techniques to get optimized efficiency using specific pipe diameters, they are able to produce an exhaust that not only performs amazingly, but sounds amazing too. Gruppe M's exhaust systems are designed to fit the same as the stock exhaust, eliminating guess-work, allowing for quick and clean fitting systems that require no custom fabrication or assembly. An important detail is their Titanium construction, reducing weight significantly and giving a dry, high-pitch exhaust note that you can't get with standard stainless steel. An added benefit of titanium contruction is that over time heat from the exhaust will change the color of the exhaust system.

    Exhaust Features:

    • Optimized exhaust pipe sizing
    • Ultra-lightweight titanium construction 
    • Racy, high-pitched exhaust note at high revs and heat color gradation
    • Dual 80mm exhaust tips
    • Shot processed stainless steel tail end (made of stainless steel)
    • Value is further enhanced by incorporating the Ram-Air intake system

    This item fits the following BMWs:
    2007-2013 E92 BMW M3
    2007-2013 E93 BMW M3

    Gruppe M
    Part #: EXI-0322
    Price: $4198.50 (USD) 
    $4665.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    Schwaben Fluid Suction/Fill Pump

    This hand held Schwaben tool makes changing fluids an easy, quick task.The Schwaben fluid suction/fill pump suitable for oils, water and any non corrosive liquid.

    Features 

    • Comes with a flexible and a rigid tube. 
    • Flow rate is adjustable for different functions.
    • 350 ML capacity
    • Cylinder is marked in 20 mL increments and fraction of quarts for accurate filling. 

    Not for use with gasoline.

    Schwaben
    Part #: 022253SCH01A
    Price: $27.71 (USD) 
    $36.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Liqui Moly Jectron Fuel Injection System Cleaner - 300 mL

    Fuel injectors tend to get built up with gunk over the years, eventually affecting the spray pattern and reducing engine efficiency. By using a fuel injector cleaner every 3-4 fill ups (or 1200 miles) like this Liqui-Moly Jectron, you can ensure that your fuel injection system is staying in top shape, giving you the best efficiency possible and preventing a number of potential issues such as poor emissions, lost performance, and rough idle.

    Features:

    • Cleans Injectors
    • Reduces Fuel Consumption and Exhaust Emissions
    • Keeps Intake Valves Clean (on vehicles without direct injection only)
    • Restores Performance, Drivability, and Durability
    • Promotes Proper Fuel Atomizing
    • Smooths Idle
    • Allows for Best Throttle Response
    • Allows for Faster Starts and Avoids Surging

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Liqui-Moly
    Part #: 2007
    Price: $6.26 (USD) 
    $6.95 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    E9X 335 N55 Analog Vent Boost Gauge & Tap

    Go for a classy retro touch in your 335 with an analog boost gauge that fits in your left-center vent. This gauge has been meticulously designed to match the rest of your E90/E92 gauges - the font and the lighting are a perfect match! This is a complete 335 boost gauge kit that looks like it came from the factory. The full kit includes lines and fittings for connecting into the factory diverter valve vacuum lines. This way of measuring boost is more accurate than reading from the OBD socket like most electronic gauges. The gauge comes with a new vent for the center console and is angled to the driver's line of sight. Also works on supercharged applications!

    335 analog boost gauge includes -

    • 45mm ECS boost gauge
    • P3Cars N55 boost tap
    • vent pod
    • pressure transducer with wiring harness
    • gauge power supply harness with connectors
    • moisture filter (from vacuum line)
    • braided vacuum hose
    • rigid vacuum hose
    ECS
    Part #: 02165ECSKT3
    Price: $249.95 (USD) 
    Direct Ship
    Quantity:   
    Turner Motorsport Ladies' Tank Top Show your support for Turner Motorsport and your favorite BMW race team and parts supplier with these stylish blue cotton Turner Motorsport tank tops. The tanks feature a yellow logo. Available in three sizes.
    Turner Motorsport
    Part #: TMSTANK
    Price: $19.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Turner E90/E92/E93 M3 S65 Performance Package - Stage 2

    POWER PULLEY + CAT DELETE + RACE SOFTWARE PACKAGE
    Max HP gain = 50hp+
    Max Trq gain = 35ft-lbs+
    Rev Limit = up to 8,600 RPM


    Turner's Stage 2 performance package for E90, E92, E93 M3 delivers a one-two-THREE punch with our most popular and most complimentary performance parts for the S65: Turner Stage 2 Race Software, Turner Test Pipes, and Power Pulley. 

    TURNER POWER PULLEY
    Get MORE HORSEPOWER and TORQUE on your 2008, 2009 and newer M3 coupe, sedan or convertible by replacing the stock crank pulley with this specially designed performance version. The Power Pulley reduces rotational mass and safely under drives your belt driven auxiliaries for reduced parasitic power loss. The end result: More power to your M3's rear wheels! Designed to give the best performance benefit with no sacrifices or compromises to your BMW's reliability. These have been tested on hundreds of cars before public release and there are simply NO DOWNSIDES to this upgrade.

    CNC machined using aircraft grade 6061 aluminum billet, and anodized with a stealthy black coating. Others may advertise "their" crank pulley boasting higher numbers (using a smaller pulley profile), but we have concluded that for street and track driven M3s, this is the best size and design to ensure proper engine temp and auxiliary functionality. As the S65 M3 V8 engine doesn't use a traditional harmonic balancer, all factory harmonics and dampening are fully and properly retained. We've found this pulley alone adds 10 to 14 HP and 7 to 9 Ft/lbs Torque on a stock M3 with no other mods(!!).

    The E9x M3 Power Pulley Kit includes:
    (1) Underdrive Crank Pulley
    (1) Correctly Sized Drive Belt
    (6) Allen Head Bolts
    (1) Installation instructions


    TURNER STAGE 2 RACE SOFTWARE + CAT DELETE TEST PIPES
    Our Race software has been fine-tuned over the years beginning with our IMSA/CTSCC E92 M3 racecars (2011 GS class champions). We modify over 40 different maps in the ECU for such things as fuel and timing maps at part throttle and full throttle, revised torque settings, knock control, VANOS and cam timing, pedal input, top speed limiter, and rev limiters. Additional tuning has been done for the cat delete - prevent limp mode and check engine lights, fault codes for cat delete, and turning off the secondary air pump (to satisfy race series regulations). Turning off the secondary air pump also disables the cold start sequence so your idle and warm-up will be smoother and quieter. A built-in cold start rev limiter safeguards the engine internals until the oil warms up. Not only is there a lot more power at all RPM but the engine is more responsive and smoother!

    Our M3 Test Pipes were designed specifically for race/track use and offer a cost-effective means of removing the very restrictive primary cats. On our Turner M3 and BMW Motorsport M3 GT4 racecars the primary cats and restrictive piping is eliminated. Our M3 cat delete pipes were the first on the market and have proven again and again to make big power on their own or especially when paired with our Stage 2 performance software. Our Test Pipes are Made in the USA with strict production tolerances and quality control. We manufacture our pipes with high quality, mandrel-bent stainless steel pipes and laser-cut flanges for an optimum fitment. New gaskets are included. The factory secondary cats remain in place. Your original O2 sensors plug into the Turner Test Pipes.

    Our software is installed via the Turner flashing OBD tool. This tool plugs into the OBD socket in the dash and the performance software is installed from a laptop computer connected to the tool. It also works as a fault code scanner to read and reset diagnostic trouble codes and reset adaptations. The software program requires a Windows XP/Vista/7/8/10 laptop and the installation and setup are very easy (click here for instructions). The OBD tool, cable, and files are shipped to you with simple setup instructions. There is no need to remove your ECU and ship it. You can have your M3 flashed in under an hour from the convenience of your garage or driveway!

    Turner Race Software Options:

    Minimum Octane

    You can choose between 91 or 93. We have developed tuning for the standard 'high octane' premium fuel found around the country (91 is the maximum available in some areas). Our power and torque gains are advertised with 91. If using 93 we can alter the knock sensor logic to extract more power with the higher grade fuel. Additional race fuel maps are also available, contact us for details.

    Rev Limit

    On 6-speed manual cars we can set a higher engine rev limit. 8,300 is stock; 8,400 is what was used on the GTS model in Europe; 8,600 is the safest raised rev limit that we have used in our race cars. To make things simple we offer it as either stock 8,300 or raised to 8,600. On DCT cars the higher rev limits are for M shift modes only (manual/paddle shift). The higher revs do not work in full auto D modes. Work is continuing on higher limits for D mode.

    Launch Control

    Our software can also enable a Launch Control feature. To use it, activate M Dynamic Mode, engage first gear, hold the throttle to the floor (it will only rev to 3,500 RPM), and dump the clutch. Keep your foot to the floor and hang on! You don't have to modulate the clutch and throttle - the engine and DSC modules will handle the launch. We experimented with different launch points and found that 3,500 RPM offers a great combination of tire hook-up and torque output. This is available on manual transmission cars only (DCT has their own built-in launch control).

    M Dynamic Mode Steering

    We can set the M Dynamic Mode (MDM) steering effort as the standard steering. The MDM steering is heavier and requires more effort when driving at higher speeds. Some owners feel that the standard steering is too light and over-boosted and the MDM steering is a nice change. This does not affect the steering effort, or the other features, of MDM.

    240E Update

    Our performance and race software is built around a specific version of stock BMW software (version 240E). It was released towards the end of M3 production and includes a number of significant changes over older versions for drivability and torque managment. 240E was such a big step forward that it's considered an upgrade all on its own. No worry if you don't have 240E - we will provide you with a free update before the Turner performance software is installed.

    In 2015 BMW released a 241E update. There are minor changes to the software code but the tuning maps and data are all the same as the 240E version so there is no need to update to 241E. If the dealer offers it we recommend that you decline. If you're already on 240E there is no reason to switch to 241E (the tuning maps are the same).

    ***This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.***


    Click here for E92 M3 Test Pipe installation instructions.

    This package fits the following BMWs:
    2008-2011 E90 BMW M3 - Sedan
    2008-2013 E92 BMW M3 - Coupe
    2008-2013 E93 BMW M3 - Convertible

    Turner Motorsport
    Part #: E9XMS65PPSTG2
    Price: $1758.90 (USD) 
    In Stock
    N54 High Pressure Fuel Pump Replacement Kit

    HPFP is a common failure component on the N54 engine, this kit contains every thing needed to replace the fuel pump and get you car back on the road.

    Kit includes:

    • Re manufactured High pressure fuel pump with $50 core charge
    • Intake manifold gasket sets  
    • Throttle body gasket 
    • Low pressure fuel sensor 
    • High pressure fuel sensor 
    Packaged by Turner
    Part #: 13517616446rKT1
    Price: $512.81 (USD) 
    $569.79 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Screw Cap & Schwaben Removal Tool Kit

    The fuel pump is held into the tank with a retaining lock ring. Most people would take an extension or punch and tap out the ring with a hammer. But that's the wrong way to do it. You could damage the lock ring, or worse, the tank itself. This handy tool is toothed to match the lock ring and takes a standard 1/2 drive ratchet or small extension. Twist the ratchet and the lock ring comes un-done cleanly and smoothly. A hefty tool that pays for itself over and over. Fits most BMWs from 1988-2013. Also has application for MINI and Porsche.

    This metal screw ring tightens down to old the top of the fuel pump or fuel filter assembly dependent on model of vehicle.

    Together they make this job simple and easy and ensure a tight fit with a new ring. 

    Packaged by Turner
    Part #: 16116762417KT1
    Price: $64.21 (USD) 
    $75.54 (Sale - Save 15%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Packaged by Turner
    Part #: 18407502196KT2
    Price: $148.70 (USD) 
    $165.22 (Sale - Save 10%)
    Ships on Dec 27, 2017
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Turner Motorsport Boost Gauge with Vent Pod - Blue & White  E9x

    With all the high-end gauges flooding the market today (don't get us wrong, we love those too!) we felt compelled to offer a driver-oriented gauge that communicated a simple parameter - boost. Featuring an an amber backlight and needle, the Turner Boost Gauge pairs well with interior and gauge lighting. With a typeface to match BMW's conventional gauge style, even the choosiest enthusiast will be comfortable installing this gauge. We also decided to stay with a more traditional style gauge to maintain a classic Motorsport look while perfectly matching your interior so nothing seems out of place.

    Having a boost gauge in your car will provide you with a view on where your car is performing when dialing in after upgrades or even diagnose a performance related issue such as a boost leak. Our gauge provides a view on where your boost levels are at under certain RPM's allowing you to make adjustments for top performance. 

    Features:

    • Amber back light and BMW-style typeface to perfectly match your interior 
    • Boost reading up to 30psi & down to 30 In-Hg
    • Installs easily in a variety of 45mm gauge pods
    • Includes wiring harness and installation hardware

    These solid differential bushings/mounts fit the following BMWs: 
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan 
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon 
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe 
    2007-2013 E93 BMW 328i 335i - Convertible 

    Turner Motorsport
    Part #: 022987TMS01A-05K
    Price: $199.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Turner Catch Can drain system

    When installing a catch can on your car, having enough space for maintenance can become an issue. This is why we developed a catch can with a bottom drain option, using this kit you can position the drain at the top or bottom of the vehicle for your convenience. Mounting the valve at the bottom of the car allows for you to empty the catch can easily during an oil change without having to move around too much. 

    Contains:

    • 1 - Plastic drain valve
    • 1 - 90 degree barbed fitting
    • 1 - Straight barbed fitting
    • 1 - 3' section of hose
    • 2 - Hose clamps
    Turner Motorsport
    Part #: 022798TMS16KT
    Price: $19.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Delrin Carbon Splitter Skid Plates - 17

    In an effort to design products that are more appealing to the daily driver we engineered these Delrin protection plates based on our own experience with bumper & splitter damage on our own M3's. The aggressive design of the E9x M3 bumper makes it virtually impossible to not have contact at some point of the bumper, from parking curbs to slight inclines making your bumper or carbon splitters look ugly. 

    We decided to use Delrin with our design due to its durable features, the hardness of Delrin will reduce the amount of visible scratches on the surface and giving extra support under high speed driving conditions. Our protection plates are offered to cover both carbon splitters and the bare bumper with an exact fitment and slightly aggressive option for both situations.

    *For use with the carbon fiber splitter upgrade. 

    This item fits the following BMWs: 
    2008-2011 E90 BMW M3 - Sedan 
    2008-2013 E92 BMW M3 - Coupe 
    2008-2013 E93 BMW M3 - Convertible 

    Turner Motorsport
    Part #: 013770TMS03KT
    Price: $159.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Complete Turner Baffled Oil Catch Can Kit - Standard Flow 6oz

    When we designed this catch we wanted to have the most function options available, the best separation method, and the easiest to service. The Turner engineered catch cans offer a pre-setup design based ion desired flow direction, however this does not limit you to this flow. The inner baffle orientation can be easily adjusted to flow in both directions in case you decide to move this catch can to a different vehicle. A 4 chamber system  baffle system inside the catch can was engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can. Having a closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation.

    Our catch can was also designed with the idea that the cans fill level can easily be checked with a top mounted dipstick and an optional use bottom drain hole. The drain system comes complete with a valve and hose to be mounted at a lower area of the vehicle so when you're doing an oil change you can drain the catch can.

    Features:

    • 6061-T6 billet machined body, anodized black for lasting protection and appearance
    • Strategically positioned 4 chamber baffle system maximizes oil / air separation 
    • Knurled and black anodized oil dipstick makes inspecting oil volume of reservoir clean and simple
    • Sealed with a pre-installed viton O-Ring
    • Includes 2.5mm allen key to remove baffle plates for cleaning
    • Engineered to create multiple changes in the direction of airflow within the separator to cause oil droplets to fall out of suspension before exiting the catch can
    • Closed / recirculated design reduces oil ingestion and promotes cleaner emissions and odor-less operation
    • Optional use drain hole - drain kit included!
    • Universal mounting kit
    Turner Motorsport
    Part #: 022798tms01-05KT
    Price: $189.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Liqui Moly Anti-Seize Compound

    Nothing is worse than a seized bolt. You run the risk of rounding off the head or even snapping the bolt all together. This could lead to costly repairs to replace the parts affected or to have the damaged bolt removed. Avoid the head-ache and use this simple anti-seize compound from Liqui-Moly to ensure easy removal of bolts and studs in the future. This specific copper based anti-seize is perfect for high-temp applications such as exhaust bolts and engine components.

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Liqui-Moly
    Part #: LM2012
    Price: $8.06 (USD) 
    $8.95 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    ECS Tuning Wheel Spacers - 17.5mm - 72.6mm CB

    Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

    ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

    ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

     

    This item fits the following BMWs:

    2008-2012 E82 BMW 128i 135 1M
    1988-1991 E30 BMW M3
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2012 E93 BMW 328i 335i M3 - Convertible
    1976-1981 E12 BMW 528i 530i
    1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
    1989-1995 E34 BMW 525i 530i 535i 540i M5
    2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
    1982-1989 E24 BMW 633csi 635csi M6
    2004-2010 E63 BMW 645ci 650i M6
    1981-1987 E23 BMW 733i 735i
    1988-1994 E32 BMW 735i 735il 740i 740il 750il
    1995-2001 E38 BMW 740i 740il 750il
    1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

    Rear Only
    2007-2013 E70 BMW X5M
    2007-2014 E71 BMW X6 xDrive35i X6 xDrive50i X6M

    ECS
    Part #: ECS#256KT
    Price: $89.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 7/8

    The Schwaben oxygen sensor wrench has a six-point pivot head to provide a secure grip on stubbornly tight oxygen sensors located in awkward, inaccessible locations.

    Features:

    • Premium chrome plated
    • Slotted socket head that slips over the sensor wire
    • Long angled handle for leverage

     

    Schwaben
    Part #: FO-78
    Price: $22.46 (USD) 
    $29.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Liqui Moly Voll-Synthese Energy 0w-40 Engine Oil - 5 Liter

    Liqui-Moly's Voll-Synthese Energy engine oil is specifically formulated for optimum oil penetration speed, deposit prevention, and resistance to aging. These factors allow for exceptional gasoline or diesel engine cleanliness, keeping the surfaces of the engine and engine components free from carbon and sludge deposits. This allows the oil to form a stronger film that in turn helps prevent wear much more efficiently than many standard oils. This also allows for easy, smooth engine operation that results in better responsiveness and less total fuel consumption.

    Meets the following requirements;

    • ACEA A3-98/B3-98
    • API SJ-CF
    • BMW [Longlife] LL-98
    • Daimler (MB 229.1)
    • VW 502.00 - 505.00

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Liqui-Moly
    Part #: 2050
    Price: $40.46 (USD) 
    $44.95 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    ECS Tuning Wheel Spacer & Bolt Kit - 17.5mm - 72.6mm CB

    Drastically improve the looks of your vehicle while improving your vehicle's handling characteristics and/or easily adjust your wheel fitment to allow for the proper clearance when installing parts such as new wheels, big brake kits, or lowering suspension components.Interference from components such as shocks, springs, or control arms are a common issue when installing wheel that are not a direct OE size replacement. By moving your wheels a few millimeters each, you can give yourself enough clearance for proper wheel fitment and give your car a wider stance in the process.

    ECS Tuning wheel spacers are constructed of high quality 6061-T6 aircraft grade aluminum and are specifically designed by in-house engineers and cnc machined to exact standards, ensuring the best fitment possible. By carefully measuring the OEM wheel hubs and bore dimensions, these spacers mount with minimal clearance to prevent any vibration, retaining the stock-like vibration free operation. 

    This kit includes wheel bolts that are lab tested to meet or exceed ISO 898 class 10.9 mechanical and physical properties to ensure perfect fastening of the wheel to the hub with no issues or potential to snap under aggressive driving conditions.

    ECS Tuning is a performance and genuine parts provider that designs their ECS Tuning branded aftermarket automotive parts in-house to ensure the highest quality and affordability possible. Every part's design is subjected to a rigorous test fit and stress test period to guarantee proper fitment and continued reliability for years to come.

     

    This item fits the following BMWs:

    2008-2012 E82 BMW 128i 135 1M
    ​1988-1991 E30 BMW M3
    1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2012 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2007-2012 E93 BMW 328i 335i M3 - Convertible
    1982-1988 E28 BMW 524td 528e 533i 535i 535is M5
    1989-1995 E34 BMW 525i 530i 535i 540i M5
    2004-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive 545i 550i M5
    1982-1989 E24 BMW 633csi 635csi M6
    2004-2010 E63 BMW 645ci 650i M6
    1981-1987 E23 BMW 733i 735i
    1988-1994 E32 BMW 735i 735il 740i 740il 750il
    1995-2001 E38 BMW 740i 740il 750il
    1990-1999 E31 BMW 840i 840ci 850i 850ci 850csi
    1997-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i M Roadster M Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    2009-2016 Z4 BMW Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is

    ECS
    Part #: ECS#256KTWB
    Price: $109.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Machined Alloy Forge Diverter Valves Kit - N54

    Forge Motorsport presents their newest diverter valve, designed specifically BMW's N54 engine. BMW utilized a very different type of valve connection mechanism that makes their product and Forge's replacement component unique. Forge started with their own 007P piston-based design and designed an entirely new valve body to retain BMW’s unique connection mechanism. This diverter valve is fully tunable for both boost-holding capacity and response using Forge's proprietary interchangeable springs and shims. This approach to valve tuning retains optimum piston travel and flow volume, regardless of spring rate.

    The included flexible and reinforced multi-layer silicone hoses are designed to allow compatibility with the stock airbox and charge piping. The hose clamps are designed specifically for silicone hoses, featuring beveled edges and a pressed drive mechanism.

    If you are running boost pressure that exceeds stock levels, you need the Forge Motorsport diverter valve.

     

    Forge
    Part #: FMDVBM35
    Price: $301.50 (USD) 
    $335.00 (Sale - Save 10%)
    Direct Ship
    Free Shipping Free Shipping
    Quantity:   
    Forge Logo Stencil This Forge stencil allows you to show off your love for the brand - often used on intercoolers.
    Forge
    Part #: FMLS
    Price: $6.48 (USD) 
    $7.20 (Sale - Save 10%)
    In Stock
    Quantity:   
    Specialty Bit Kit - 100 Pieces

    All the right bits in one box. The perfect assortment to keep the job going.

    Features:

    • 10 fractional SAE hex, 9 Torx® tamper-proof, 9 Torx®

    • 9 Metric hex bits, 9 slotted bits, 8 Pozi-drive, 8 Phillips, 4 square-recess, 4 tri-wing

    • 3 spline, 3 Torq, 3 clutch, wing-nut driver, magnetic bit holder and socket bit holder

    • Made of hardened Chrome Vanadium steel for years of dependable use

    • Packaged in a handy blow molded case with individually marked bit slots for easy organization

    Schwaben
    Part #: P-100B
    Price: $16.46 (USD) 
    $21.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 14mm Deep Well Spark Plug Socket - 3/8

    When it comes to replacing the spark plugs on a N54 or N55 engine you may have already noticed the standard small spark plug socket is a bit to big. This socket is a more affordable option for your weekend tune-up.

    Features:

    • BMW N54 and N55 3.0 liter engines
    • MINI Gen 2 (R55, R56, R57 & R60+) Models
    • 14mm 12-point socket
    • 3.5" long socket 
    • Internal magnet to retain the spark plug
    • knurled grip

    Don't attempt an N54/N55 spark plug replacement with a conventional spark plug socket!

    Schwaben
    Part #: 001247SCH01A
    Price: $11.21 (USD) 
    $14.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 3/8

    Proper torque is very important when it comes to working on engines. The importance comes from proper sealing and to keep from damaging threads.

    Features:

    • Reversible 3/8"-inch drive click-to-stop
    • Torque range of 5 to 80 ft-lb
    • Accurate to within +/-4%
    Schwaben
    Part #: TW-38365
    Price: $27.71 (USD) 
    $36.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 8-In-1 Oil Drain/Fill Plug Wrench

    The tough swivel heads fit an assortment of hexagonal and square recessed drain plugs. A strong magnet on the wrench handle keeps drain plugs handy until they are ready to be reinstalled.

     

    Features:

    • Made of vanadium steel for strength, with chrome plated, corrosion resistant surface.
    • Hex sizes: 10, 12, 14, 17
    • Square head sizes: 8, 10, 3/8” and ½”
    Schwaben
    Part #: W-136PNM
    Price: $14.96 (USD) 
    $19.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    5MM Silicone Vacuum Hose - Red - 9 Feet Car suffering from vacuum leaks? This vacuum hose has a 5mm inner diameter. 
    Forge
    Part #: vc05r
    Price: $12.56 (USD) 
    $13.95 (Sale - Save 10%)
    In Stock
    Quantity:   
    Schwaben Pry Bar / Seal Puller Kit - 3 Pieces

    Having an adjustable pry bar really comes in handy when working in tight spaces as well as making seal replacement much easier.

    Features:

    • Three hardened alloy metal bars in 10, 12, and 15 inch lengths, with knurled, non-slip handle grips.
    • Push button release at pry bar pivot allows the pry head to rotate through a wide arc and lock in place again when the button is released.
    • Packaged in a handy molded case for portability and easy organization.

     

    Schwaben
    Part #: PB-3PCS
    Price: $37.46 (USD) 
    $49.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Digital Tire Pressure Gauge

    The digital tire pressure gauge can help you check and correct tire pressures on a regular basis to prevent these problems. Lightweight gauge with a digital display that can measure pressures from 0-150 psi; accurate to 0.10 psi. Display pressure in psi, bar, kg/cm, and kPa.

    Correct tire inflation reduces tire wear and improves vehicle handling and fuel economy. Under inflated tires run hot, wear faster, and reduce fuel economy. They can also illuminate the Tire Pressure Monitoring System (TPMS) warning light on vehicles equipped with the system.

    The gauge has an angled head with a clear digital display and a battery saver features that shuts off the gauge automatically, when not in use. Batteries are included.

    Schwaben
    Part #: PJD3238L-2
    Price: $8.21 (USD) 
    $10.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Carbon Fiber License Plate Frame This is a 100% real carbon fiber license plate frame cover. These 3K twill weave carbon fiber license plate frames fit the standard size US license plate. It's perfect for those automobile enthusiasts with carbon fiber parts on their beloved vehicle or just simply wants to add a performance touch.

    Please note that this license plate frame is made of real carbon fiber and not aluminum/ plastic with carbon fiber look, those prints will fade and discolor over time.

    Package will include 1 real carbon fiber license plate frame that fits onto standard size US license plates, screws are not included for the installation.

    ECS
    Part #: UN-0007
    Price: $39.95 (USD) 
    Ships on Dec 29, 2017
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    AFE Exhaust - Cat-Back - E9x 335i 07-10 with Polished Tips The Mach Force XP cat-back exhaust system produces 11hp and 10lbs. x ft. of torque for your BMW 335i. This exhaust systems is constructed from 2.75" mandrel bent, 304 hand brushed stainless steel and utilizes a unique crossover pipe that helps to equalize exhaust pressure and tunes the exhaust pulse. The system also comes with dual 3.5" polished 304 stainless steel tips and muffler to build a mellow, yet powerful sound. Note: Cutting is required and should be performed by a skilled technician.

    All aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.

    Leak-Free Seal:
    High quality band clamps are used for a complete 360 degree sealing surface.

    Aggressive Sound:
    A free-flowing mufflers is used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.

    Crossover Balance Tube:
    The crossover balance tube equalizes and evenly distributes exhaust pulses traveling through the exhaust system. This not only creates more efficient flow and better performance, it also reduces sound decibels ultimately minimizing exhaust drone.
    AFE
    Part #: 49-36301
    Price: $1394.10 (USD) 
    $1549.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    aFe Pro5R Air Filter - E90/E92/E93 M3 2010+ This is a drop-in stock replacement aFe performance air filter that installs into your BMW's factory airbox. This particular filter fits the following BMWs:

    E90 E92 E93 3 series : M3 2010+

    This version used aFe's highest flowing filter media, which uses a lightly oil gauze to filter out dirt and particulates, while allowing more air to flow to the intake. For the best flowing filter, with the best performance gain, we always recommend this standard aFe filter media (often called "Pro5R ", which has a blue pre-oiled filter media). We also carry this filter in the "ProDry" grey filter media, which is oil-free for only slightly less performance and no maintenance.
    AFE
    Part #: 10-10119
    Price: $98.06 (USD) 
    $108.95 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Liqui Moly Top Tec 4100 5w-40 Engine Oil - 1 Liter

    Using a combination of unconventional synthetic base oils and the latest additive technology, this state of the art engine oil is perfect for gasoline and diesel engines equipped with a particulate filter and extended maintenance intervals. This provides exceptional wear protection and helps reduce oil and fuel consumption all while providing fast oil penetration.

    Properties:

    • Smooth engine running characteristics
    • Long engine service life due to exceptional protection against wear
    • Rapid oil delivery at low temperatures
    • Optimum oil pressure at all engine speeds
    • Premium lubrication reliability at high and low temperatures
    • High shear and ageing stability
    • Reduces fuel consumption and pollutant emissions
    • Outstanding engine cleanliness
    • Tested with catalytic converters and performance proven with turbochargers

    Approved for the following specifications:

    • ACEA C3
    • API SN / CF
    • BMW Longlife-04
    • MB-Approval 229.31
    • Porsche A40
    • VW 505.00 / 502.00 / 505.01

    Recommended for the following specifications:

    • ACEA A3 / B4

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Liqui-Moly
    Part #: LM3700
    Price: $8.96 (USD) 
    $9.95 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Metric Bubble Flaring Tool Set

    When replacing old corroded brake lines this is a must have tool to get the job done right. Create a bubble flare to match the connection style is an important part of creating the proper seal. Don't forget your tube cutter.

     

    Features:

    • Creates the ISO bubble flare found on European, Japanese and some domestic model brake lines.
    • Includes hardened steel bar and adapters for 4.75mm,6mm,8mm and 10mm tubing.
    • Durable blow molded case for easy transport and organization

     

     

    Schwaben
    Part #: 006394SCH01A
    Price: $49.96 (USD) 
    $79.95 (Sale - Save 38%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 2-pc 56

    Ideal for smaller sports cars with short noses.  Great for quick oil changes and underbody maintenance.

    Please take measurement below before ordering.

     

    Features:

    • Lightweight at only 4 lbs each and Withe handy carrying straps
    •  Will not slip, slide or scoot on any surface and never scratches or marks your floor
    •  100% solid core construction for additional strength
    •  56 " long,12" wide, 8" lift height, at 15 lbs each and a low 10.8 degree incline
    • Great for quick oil changes and underbody maintenance.

       

       

     

     

     

     

    Schwaben
    Part #: 006143SCH01A
    Price: $165.00 (USD) 
    $220.00 (Sale - Save 25%)
    Ships on Dec 26, 2017
    Quantity:   
    Wall-Mounted Wheel & Tire Storage Rack

    As any mechanic either at home or in a shop knows, there is rarely enough usable floor space. At least with a wall mounted tire rack you can count on the spare tires to be out of your way. Space is not the only factor for choosing a wheel storage product like this, most people don't realize that a concrete floor actually draws moisture leaving your tires to dryout even faster.


    Features:

    • Adjustable links allow you to store any size from 12" wheels to 19" wheels with tires
    • Folds flat against the wall when not in use to maximize your usable space
    • Supports up to 250 lbs and weighing in at only 20 lbs itself
    • 46" wide storage area (holds up to four 11½" wide tires)
    • Sturdy steel construction
    • Mounting holes spaced 48" apart for mounting to standard center studs
    Schwaben
    Part #: 003638SCH01A
    Price: $44.96 (USD) 
    $59.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Schwaben Deep Well Impact Socket - 36mm

    This large socket is the perfect tool for axle nuts when servicing the axle shafts or wheel bearings.

    Features:

    • ½-inch drive 36mm 12-point socket
    • Specially hardened to take the added abuse from a impact gun
    • Coated for added protection and so you can tell it apart from non impact rated sockets
    • 75mm depth  to accommodate many applications and different length shafts
    • Made of durable chrome moly steel
    Schwaben
    Part #: 003302SCH02A
    Price: $14.96 (USD) 
    $19.95 (Sale - Save 25%)
    Ships on Jan 2, 2018
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Wheel Storage Rack With Casters

    Now you can stack your extra wheels without the danger of scratches and scuffs. This wheel storage rack keeps your wheels spaced apart, and being on locking casters, allows you to easily move the whole set anywhere in your garage or shop at one time. Sturdy steel construction and a wide base means this wheel rack won't tip over. Holds up to 275 lbs - enough for most any wheel & tire set.

     

     

    Fits up to 8½" wide wheels, depending on offset

    Schwaben
    Part #: 003639SCH01A
    Price: $41.21 (USD) 
    $54.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Schwaben LED Underhood Shop Light

    This underhood light was designed especially for automotive under the hood work. Featuring 120 super bright LEDS for complete engine bay illumination. Built from heavy duty materials, Thermoplastic Rubber, Aluminum and ABS . LEDS are fully protected by a polycarbonate transparent lens.To protect the hood from scratches, hooks have a soft foam covering. LEDs are designed to last up to 100,000 hours for years of trouble free service.

    Features:

    • Corded 120 LED's
    • Rugged heavy-duty design for long life.
    • Made from ABS, thermoplastic rubber and aluminum.
    • Polycarbonate transparent lens.
    • Spring loaded built in telescopic mounting brackets hold tight onto hood.
    • Soft padded hooks provide good protection against hood scratches.
    •  Long 15ft power cord.
    • Two working modes : Low beam and high beam illumination.
    • On and off power switch.
    • Working hood width : 48 to 74 in.

     

     

    Schwaben
    Part #: 006191SCH01A
    Price: $74.96 (USD) 
    $99.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    E82/E9X ECS Tuning 28mm Performance Front Sway Bar

    E82/E9X 28mm front sway bar with urethane bushings.

    Sway bars are typically sold as a front and rear set to balance the handling. But a front sway bar only can also have excellent benefits, especially on a street car. Going with a larger front bar will improve steering and handling even at low-moderate speeds. Steering turn-in is faster and gives the car a more direct and responsive feel. Cars with staggered wheel fitments (a narrower front wheel compared to the rear) will especially benefit from this and help the front tire 'bite' into the road. 

    ECS has specified a 28mm sway bar that has been fine-tuned for use on the E9X and E82 models. Urethane bushings with a reinforced inner core that requires no lubrication are included. 

    This item fits the following BMWs: 
    2008-2013 E82 E88 BMW 128i 135i 1M Coupe
    2006-2011 E90 BMW 325i 328i 330i 335d 335i M3 - Sedan
    2007-2011 E91 BMW 325i 328i - Touring Wagon
    2007-2013 E92 BMW 328i 335i 335is M3 - Coupe
    2007-2013 E93 BMW 328i 335i 335is M3 - Convertible

    ECS
    Part #: 007278ECS01A
    Price: $209.95 (USD) 
    In Stock
    Quantity:   
    Schwaben Strut Nut Socket - 24mm To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.
    Schwaben
    Part #: 003046SCH01A-05
    Price: $11.21 (USD) 
    $14.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Strut Nut Socket - 18mm To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.
    Schwaben
    Part #: 003046SCH01A-01
    Price: $11.21 (USD) 
    $14.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Strut Nut Socket - 21mm To secure shocks and struts to their mounts, the retaining nut must be torqued to its proper specification using a torque wrench. An improper torque value may result in premature mount failure - or worse. Strut nut sockets allow for the use of an allen wrench to hold the damper shaft while utilizing your 1/2" drive torque wrench on the socket to achieve proper torque.
    Schwaben
    Part #: 003046SCH01A-03
    Price: $11.21 (USD) 
    $14.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben 12 Pc Metric Combination Wrench Set

    Quality combination wrenches are a must when doing any kind of automotive work.

    Features:

    • A complete set from 8 to 19 mm 
    • Professional quality wrenches in full length feature open end on one end and 12 pt box on the other
    • Satin finish provides superior feel, slip resistant grip, easy cleanup and inhibits rust
    • Includes sturdy wrench holder for easy storage
    • Limited Lifetime Warranty

     

    Schwaben
    Part #: 005989SCH01A
    Price: $44.96 (USD) 
    $59.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Deep Well Impact Socket - 27mm

    Durable Impact sockets for hard to remove fasteners safely.

    Features:

    • Brawny ½-inch drive 27mm 12-point socket
    • Specially hardened to take the added abuse from a impact gun, this socket is also coated for added protection and so you can tell it apart from non impact rated sockets
    • Accommodating 53mm depth to accommodate many applications and different length shafts.
    • Made of durable chrome moly steel, this socket is tough enough to get the job done.
    Schwaben
    Part #: 003302SCH04A
    Price: $14.96 (USD) 
    $19.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Liqui Moly Long Life Grease with MoS2 - 100 grams

    Made specifically for long periods of lubrication for extremely high bearing pressures and high pressure surface contact, this grease with the added MoS2 Anti-Friction modifier is great for things such as c.v. joints, bearings, guides, and spline shafts.

    Long term protection for frictions heavy components.

    Liqui-Moly is a German chemical company that offers top of the line engine oils, additives, and car care products that are designed to extend the life of your engine and ensure the best lubrication and cleanliness off engine and transmission components possible. With more than 50 years of experience and reviews across the world from magazines and race teams, Liqui-Moly proves time and time again why they are one of the most innovative lead forces of performance automotive chemicals in the world.

    Liqui-Moly
    Part #: 2003
    Price: $4.46 (USD) 
    $4.95 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Professional Magnetic Camber/Caster Gauge

     Make precision camber and caster adjustment easily and quickly. 

    Can be mounted directly to the hub on some cars or a wheel mount kit.

    Features:

    • Reads camber from +6° to -6° accurate to 1/4°.
    • Caster readout from +12º to -4º in 1/2º increments.
    • Strong magnetic adapter.
    • Long lasting black powder-coated finish.
    • Comes with silver carrying case with foam insert for storage and on the go adjustments
    Schwaben
    Part #: 010887SCH01A
    Price: $104.96 (USD) 
    $139.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Schwaben Remote Starter Switch

    Great for compression tests, aligning timing marks, belt installation and much more.

    Features:

    • High 20 amp rating.
    • 5 ft heavy duty leads.
    • Convenient hot circuit indicator light.
    • Non-slip rubber grip.

     

    Schwaben
    Part #: 010611SCH01A
    Price: $22.46 (USD) 
    $29.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
     Performance Caliper Guide Bushing Set

    This caliper bushing kit will eliminate flex caused by weak rubber caliper bushings. As the brake pedal is pressed the caliper grabs the rotor and twists on its mounting bushings. The rubber bushings allow the caliper to deflect and twist which affects pedal feel and results in uneven pad wear. These solid brass bushings will not twist or deflect so your calipers can squeeze the pads evenly on both sides of the rotor (sort of like what multi-piston big brakes do). This will give you much longer pad life and a more consistent pedal feel. This is the most complete kit we have ever sold with stainless steel caliper slide bolts, o-rings, and new dust boots. Unlike other kits, these bushings are pressed into the caliper and will not shift or slide on their own.

    Installation is straightforward: remove the old rubber bushings and press in the new brass bushings (we recommend special tool 003326ECS03). High temp caliper grease or anti-seize is required. The new bushings include an inner o-ring that helps trap grease on the slide bolt, reducing friction and wear. Instructions are included.

    Enter your model for specific fitment notes.

    ECS
    Part #: 003326ECS02
    Price: $119.95 (USD) 
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up