BMW Oil Filters & Oil Filter Kits for BMW 7 Series F01 (2009+)

Clear BMW chassis
What is more important to your engine than its oil supply? You can change your oil as many times as you want but if you don't change the oil filter you might as well dump the old oil back in! Replace your oil filter with every oil change (per BMW's recommendation) and you'll never worry about dirty oil again. We supply both Genuine BMW filters and filters from the OEM Suppliers to BMW. Hengst is our official race sponsor and we trust them in all of our BMWs here at Turner Motorsport.

BMW Oil Cap Crankcase Breather - All BMW w/2 prong oil fill cap
Vargas Turbo Technologies - Corporate Logo
T#:558084
Part#: VTT-CRANK-BREATH
In Stock
$99.00
Free Shipping on orders $99 and up

VTT is happy to introduce the first and only available plug and play crankcase breather kits for ALL BMW applications that use the two-prong oil tab style oil fill caps. With this breather simply remove your oil cap, install the breather, and instantly free up horsepower, improve turbo draining, remove crankcase pressure, all while adding a cool look to your engine bay.

Can be used by itself with the stock PCV system to eliminate crankcase pressure, or with any number of PCV setups for the ultimate in crankcase pressure relieve 

Made from 6061-T6 Aircraft aluminum anodized black for a long-lasting finish, 4 stainless steel baffles for complete oil control, a PTFE one way check ball, a high-quality filter, and clamp all work together to keep crankcase pressure where it belongs, out of your crankcase.

This breather will fit:
 ALL BMW's with the two-prong style oil fill cap including but not limited to N54, N55, S55, S54

NOTE: NOT ALL THE MODELS LISTED HAVE THE SAME HOOD CLEARANCE, WE CANNOT SAY WHICH MODELS WILL HAVE CLEARANCE ISSUES, AND WHICH WILL NOT AS WE HAVE NOT TEST IT ON ALL MODELS. IF YOU ARE ORDERING THE BREATHER FOR ANYTHING OTHER THAN AN N54 TEST CLOSE YOUR HOOD CAREFULLY TO ENSURE CLEARANCE IF IT DOES NOT FIT LET US KNOW, AND WE WILL GET YOU A REFUND ONCE THE BREATHER IS RETURNED.

MODEL LIST OF REPORTED CLEARANCE ISSUES: N55 E/F 3 SERIES

Billet Aluminum Oil Filter Housing Cap - N20 N52 N54 N55 S55
ECS - Corporate Logo
T#:363147
Part#: 003296ECS01
In Stock
$94.95
Free Shipping on orders $99 and up
BMW uses a lot of plastic in their engine components to save weight and money. Unfortunately, plastic is damaged easily and the factory oil filter cap needs a special tool to remove. This aluminum cap is much more sturdy and features a standard 17mm hex post on the top. 17mm is also the size of your engine oil drain plug, reducing the number of tools that you need to complete an oil change. This cap is designed to use the original o-ring seal so no special parts are required. You only have to remove the original 'filter cage' from the original cap and transfer it to the new aluminum cap. The satin black anodize blends in with the rest of your engine bay making this a smart and subtle upgrade.
K&P Engineering High Performance Stainless Steel Micronic Oil Filter - N20 N52 N54 N55
K&P Engineering - Corporate Logo
T#:402535
Part#: S38
In Stock
$99.00
Free Shipping

Stainless steel filtration is not a new technology but is quickly gaining popularity in the automotive segment. With the ability to filter down as small as a paper filter element with the ability to be washed and reused!

The K&P Engineering filter element is made from medical grade, type 304 stainless steel micronic filter cloth to provide unmatched protection against oil contamination and resultant engine damage. A one inch square of this material flows an incredible 1.9 gallons of oil per minute at only 1 PSI pump pressure. The adhesive used in the filter assembly process is good to 600 degrees Fahrenheit, far above normal engine operating temperatures. A super strength nickel-plated neodymium rare earth magnet is installed in the top of the element for magnetic pre-filtering of the oil. The sophisticated bypass is engineered for proper differential pressures and consistent operation, delivering a greater percentage of filtered oil while being very easy to clean. The twist lock design assures positive filter element placement and allows for easy disassembly, inspection, and cleaning. The quad-ring gasket doubles the seal between the filter and the engine. Finally, the filter housing is carved out of solid 6061T6 billet aluminum, which not only looks trick but aids in dissipating heat.

K&P Engineering manufactures stainless steel filters for a vast array of engines around the world. Staying at the forefront of design and testing allows this company to offer a top tier product for your European vehicle.

Features:

  • Consistent filtering across entire filter surface
  • Superior ASTMF316 filtration performance
  • Magnetic Prefiltering
  • Progressive rate bypass combined with high flow characteristics of the filter media avoids unfiltered oil bypassing the filter during cold startup and high rpm
  • Easy inspection of engine contamination
  • Proven in Motorsports, Military and Aerospace applications for years. Technology is FAA approved for use in aircraft. 

At regular oil changes, clean to K&P's specifications for continued used - a true lifetime filter.

This part fits the following BMWs:
2012+ F30 3 Series Sedan 328i 328iX 328i 328iX 335i 335iX 
2006 - 2013 E9X 323i 325i 325xi 328i 328xi 330i 330xi 335i 335xi
2010 - 2016 F10 5 Series Sedan 528i 528iX 530i 535i 535iX 
2003 - 2006 E60 Sedan 525i 525xi 530i 530xi 
2007 - 2010 E60 528i 528xi 535i 535ix 
2009 - 2016 E89 Z4 Roadster Z4 sDrive28i Z4 sDrive30i Z4 sDrive35i 
2014+ F22 2 Series Coupe 228i 228iX M235i M235iX
2007 - 2013 E88 1 Series Convertible 128i 135i
2008 - 2013 E82 1 Series Coupe 128i 135i 135is 1M Coupe
2012 - 2013 E70 X5 xDrive35d X5 xDrive35i
2007 - 2011 E70 X5 3.0sd X5 3.0si 


aFe Pro GUARD D2 Oil Filter 4 Pack - N54/55 BMW Engine
AFE - Corporate Logo
T#:557623
Part#: 44-LF029-MB
Direct Ship
$40.84
$40.84

Made from a synthetic media that allows maximum filtration with minimal flow restriction to satisfy modern oil-hungry engines such as the N54 and N55.

Pro-GUARD D2 Oil Filters are the next generation in oil filter technology. Pro-GUARD D2 Oil Filters deliver increased flow and efficiency that are demanded from performance gas applications. This cartridge style filter comes with a built-in seal for a hassle free installation.


OEM Hengst Engine Oil Filter Kit - N20 2.0L, N52 N54 N55 3.0L
Hengst - Corporate Logo
T#:567077
Part#: 11427953129
In Stock
New Item
$6.29
Free Shipping on orders $99 and up
This is an OEM Hengst oil filter kit made with the same materials and design as the original oil filter used in BMW dealers (but at a better price!). The kit includes the oil filter, housing cap o-ring, and washer.
OEM Mahle Oil Filter - F10, F12, F01, E70 X5, E71 X6
Genuine BMW - Corporate Logo
T#:14534
Part#: 11427583220
In Stock
22% off MSRP $23.65
$18.42
Free Shipping on orders $99 and up
22% off MSRP $23.65
$18.42
Free Shipping on orders $99 and up
Replacement oil filter kit for most 2010 and newer V8 engine BMWs. This filter is for the N63 V8 engine and N74 V12 engine.

This item fits the following BMWs:
2010+ F07 BMW 550i GT, 550i xDrive GT
2011+ F10 BMW 550i 550i xDrive
2012+ F12 BMW 650i 650i xDrive
2013+ F06 BMW 650i Gran Coupe 650i xDrive Gran Coupe
2009+ F01 BMW 750i 750li 750i xDrive 750li xDrive 760li E70 BMW X5 xDve50i
2008+ E71 BMW X6 xDrive50i

aFe Pro GUARD D2 Oil Filter - N54/55 BMW Engine
AFE - Corporate Logo
T#:394579
Part#: 44-LF029
In Stock
$14.24
$14.24

Made from a synthetic media that allows maximum filtration with minimal flow restriction to satisfy modern oil-hungry engines such as the N54 and N55.

Pro-GUARD D2 Oil Filters are the next generation in oil filter technology. Pro-GUARD D2 Oil Filters deliver increased flow and efficiency that are demanded from performance gas applications. This cartridge style filter comes with a built-in seal for a hassle free installation.

Genuine BMW Oil Drain Plug - N62 N63 4.4L 4.8L
Genuine BMW - Corporate Logo
T#:27702
Part#: 07119905428
In Stock
$5.54
Free Shipping on orders $99 and up

This genuine BMW replacement oil drain plug is perfect to replace your old beat up or stripped oil plug for easy removal and oil changes.


Genuine BMW Screw Plug
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E53 48IS,E38,E39,E53 X5 X5,E63,E65,E70 X5,E71 X6,F01,F02,F06,F10,F12,F13,F15,F16


ECS Tuning Magnetic Oil Drain Plug (M12x1.5)
ECS - Corporate Logo
T#:361057
Part#: 002201ECS01A
In Stock
$12.95
Free Shipping on orders $99 and up
Turn your oil drain plug into an effective metal particle filter! This drain plug fits virtually all BMWs, and has a SUPER strong magnet built into it's tip, trapping iron and steel contaminants and safely removing them from the circulation. 

This is a must for ALL BMWs, and simply installs in place of your existing drain plug. With every oil change you perform on your BMW, you'll be able to inspect for metal shavings and debris. Many times, if something is going wrong on your BMW's engine, the drain plug can give you an early warning. Our championship race team uses this info all the time (Ever find a piece of a valve spring in your oil? We have!) Be sure to get one now, and make the swap next oil change! 

This magentic drain plug most BMWs (except pre-1980's). It includes a new/fresh copper washer. 

Note: requires thin wall socket and very slight trimming of the undertray for E46 M3, Z4M, Z3M with S54 engine

Genuine BMW Oil Drain Plug with Sealing Washer - N62 N63 4.4L 4.8L
Genuine BMW - Corporate Logo
T#:402828
Part#: 07119905428KT
In Stock
$6.55
Free Shipping on orders $99 and up

This genuine BMW replacement oil drain plug with washer is perfect to replace your old beat up or stripped oil plug for easy removal and oil changes.


Genuine BMW Screw Plug
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E53 48IS,E38,E39,E53 X5 X5,E63,E65,E70 X5,E71 X6,F01,F02,F06,F10,F12,F13,F15,F16

Genuine BMW Oil Filter Kit - N20 N54 N55
Genuine BMW - Corporate Logo
T#:401546
Part#: 11427953129
In Stock
26% off MSRP $18.21
$13.48
Free Shipping on orders $99 and up
26% off MSRP $18.21
$13.48
Free Shipping on orders $99 and up
OEM Bosch Oil Filter Kit -- N52 N54 N55 N20
Bosch - Corporate Logo
T#:378765
Part#: 11427566327
In Stock
$10.95
Free Shipping on orders $99 and up

The oil filter is one of the most simple and yet crucial components of your vehicle, preventing contaminants from flowing back into the engine causing excessive wear and damage. Why buy a cheap alternative when you can have peace of mind with this high quality Bosch oil filter?

Bosch is one of the largest OEM producers of Genuine BMW and aftermarket parts in the world, providing parts for almost every major automotive manufacturer. Bosch has likely supplied many of the original electrical (and mechanical) parts for your BMW. Thanks to their quality, high durability, and reliability, you should expect a long service life from Bosch products.

As a leading source of high performance BMW parts and accessories since 1993, we at Turner Motorsport are honored to be the go-to supplier for tens of thousands of enthusiasts the world over. With over two decades of parts, service, and racing experience under our belt, we provide only quality performance and replacement parts.  All of our performance parts are those we would (and do!) install and run on our own cars, as well as replacement parts that are Genuine BMW or from OEM manufacturers. We only offer parts we know you can trust to perform!



OEM Mahle/Mann Oil Filter - Most 2006+ 6 cylinder, N52/N54/N55/S55
Mann - Corporate Logo
T#:4162
Part#: 11427566327
In Stock
$9.95
Free Shipping on orders $99 and up
Replacement oil filter kit for most 2006 and newer 6 cylinder BMWs (see list below). This filter is for the N52/N54/N55 engine, the engine used in 2006+ BMWs. It's also used in the 2015+ F80 M3/M4 but BMW also recommends replacing the oil drain plug at the same time (sold separately).

Alternate BMW part# 11 42 7 541 827 (11427541827).

N55 engine note - this filter works with the aluminum oil filter housing only (not plastic).

This filter fits the following BMWs:
2008+ E82 BMW 128i 135i 1M Coupe
2014+ F22 BMW M235i
2006+ E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335i 335xi 335i xDrive - Sedan
2006+ E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007+ E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007+ E93 BMW 328i 335i - Convertible
2012+ F30 BMW 320i xDrive 328i xDrive 335i 335i xDrive - Sedan
2013+ F31 BMW 328i xDrive 328d xDrive - Wagon
2013+ F32 BMW 428i xDrive 435i 435i xDrive - Coupe
2014+ F34 BMW 335i xDrive GT - Gran Tourismo
2015+ F80 BMW M3 - Sedan
2015+ F82 BMW M4 - Coupe
2015+ F83 BMW M4 - Convertible
2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive
2010+ F07 BMw 535i GT, 535i xDrive GT
2011+ F10 BMw 528i 535i 535i xDrive
2012+ F13 BMW 640i
2009+ F01 BMW 740i 740li
2006-2010 E83 BMW X3 3.0i X3 3.0si
2011+ F25 BMW X3 xDrive28i X3 xDrive35i
2007-2013 E70 BMW X5 3.0si X5 xDrive30i X5 xDrive35i
2007-2014 E71 BMW X6 xDrive35i
2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009+ Z4 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is