Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW F02 VANOS Units & Parts

BMW F02 VANOS Units & Parts The BMW VANOS system (variable Nockenwellensteuerung - variable camshaft timing) was introduced in the early 1990s as a way of altering timing based on RPM and engine load to improve torque delivery, fuel economy, and engine smoothness. The first systems were single-VANOS and operated the intake cam only. Beginning in 1999, double-VANOS was introduced that did both intake and exhaust banks (on both inline-6 and V8 engines).

By 150,000 miles the original VANOS actuator solenoids, seals, and o-rings are usually due for a complete replacement. Some individual pieces may have been replaced already. Signs of a dying unit are loud marble-like rattles from the front of the engine, loss of power and mid-range torque, poor fuel economy, and fault codes for misfires and VANOS-related sensors. VANOS sensors, solenoids, and some other parts are available separately. VANOS units can be rebuilt by sourcing the seals and o-rings on their own but that process still requires expert mechanical knowledge and special tools. We prefer to offer complete, rebuilt VANOS units to make the replacement as seamless and trouble-free as possible for you.

Note: all VANOS systems require special tools for correct repair and replacement. These tools are BMW specific. If you do not possess these tools we strongly advise you to bring the parts to a qualified and experienced BMW technician who does.
You're currently viewing parts for your (F02) 7-Series LWB 2009+. Reset your chassis
For accurate results, specify your model below.
VANOS Camshaft Solenoid - N51/N52/N54 - E82 E90 E92 E60 F10 E83 E70 E85 E89 The VAN0S system on your N51, N52, and N54 engine controls the valve timing inside the engine. The system is hydraulically operated based on instructions from the engine computer. It's very complex and BMW has not yet perfected the system. The VAN0S solenoid is the actuator that takes instruction from the ECU and activates the VAN0S unit on the front of the engine. When the solenoid is failing (or failed) you can end up with a rough running engine, misfires, bad fuel economy, lack of power, and more. It should trigger multiple fault codes and a check engine light for misfires, camshaft control, VAN0S solenoid, boost pressure control, and maybe others. It's important to thoroughly troubleshoot fault codes but VAN0S solenoids are a known issue with these engines.

The VAN0S solenoids are located on the front of the engine and may be replaced without removing many other components. In some cases you may be able to remove the suspect one, clean it, reinstall, and reset your fault codes. If your fault codes come back it's a strong indication that a replacement is required. Or you can buy the new solenoid and replace instead of doing the work twice.

VANOS solenoid for the intake and exhaust are the same part number. Order 2 if you want to replace them both.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 1M Coupe
2008-2010 E82 BMW 135i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335is - Sedan
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335is - Coupe
2007-2010 E92 BMW 335i 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i - Convertible
2007-2010 E93 BMW 335i - Convertible
2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive
2011 F10 BMW 528i
2006-2010 E83 BMW X3 3.0i X3 3.0si
2007-2013 E70 BMW X5 3.0si
2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009-2011 Z4 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Genuine BMW
Part #: 11367585425
Price: $166.09 (USD) 
$197.26 (Sale - Save 16%)
In Stock
Free Shipping Free Shipping
VANOS Camshaft Solenoid - N51/N52/N54 - E82 E90 E92 E60 F10 E83 E70 E85 E89 The VAN0S system on your N51, N52, and N54 engine controls the valve timing inside the engine. The system is hydraulically operated based on instructions from the engine computer. It's very complex and BMW has not yet perfected the system. The VAN0S solenoid is the actuator that takes instruction from the ECU and activates the VAN0S unit on the front of the engine. When the solenoid is failing (or failed) you can end up with a rough running engine, misfires, bad fuel economy, lack of power, and more. It should trigger multiple fault codes and a check engine light for misfires, camshaft control, VAN0S solenoid, boost pressure control, and maybe others. It's important to thoroughly troubleshoot fault codes but VAN0S solenoids are a known issue with these engines.

The VAN0S solenoids are located on the front of the engine and may be replaced without removing many other components. In some cases you may be able to remove the suspect one, clean it, reinstall, and reset your fault codes. If your fault codes come back it's a strong indication that a replacement is required. Or you can buy the new solenoid and replace instead of doing the work twice.

VAN0S solenoid for the intake and exhaust are the same part number. Order 2 if you want to replace them both.

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMWs:
2008-2012 E82 BMW 128i 1M Coupe
2008-2010 E82 BMW 135i
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335is - Sedan
2006-2010 E90 BMW 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335is - Coupe
2007-2010 E92 BMW 335i 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i - Convertible
2007-2010 E93 BMW 335i - Convertible
2006-2010 E60 BMW 525i 525xi 530i 530xi 528i 528xi 528i xDrive 535i 535xi 535i xDrive
2011 F10 BMW 528i
2006-2010 E83 BMW X3 3.0i X3 3.0si
2007-2013 E70 BMW X5 3.0si
2006-2008 E85 BMW Z4 3.0i Z4 3.0si
2009-2011 Z4 BMW Z4 sDrive30i Z4 sDrive35i Z4 sDrive35is
Genuine BMW
Part #: 11367585425
Price: $166.09 (USD) 
$197.26 (16% off MSRP)
In Stock
Free Shipping Free Shipping
Quantity:   
Elring VANOS Solenoid Valve Sealing Gasket Set - E60, E61, E70, E82, E83, E88, E85 E86 E89 Z4, E9X, F01, F02, F07, F10

Rubber seals are often hardened and damaged by excessive heat and constant temperature changes causing them to become brittle and crack or split. If your seal has split, replace it with a new Elring seal for long reliability and to prevent further problems.

Elring is one of the biggest OEM names in the manufacturing of high quality gaskets that are available for very affordable prices. Elring has supplied many automotive names for years with the gaskets that seal your car's components from day 1 so you can rest assured that these components will last for a long time to come!

Fits the following BMW's:
E60, E61, E70, E82, E83, E88, E85 E86 E89 Z4, E9X, F01, F02, F07, F10

Fits the following Engines:
N52 N54 N55 S65 N63 

Elring
Part #: 11367548459
Price: $4.95 (USD) 
In Stock
Free Shipping Free Shipping
on orders $99 and up
Quantity:   
Genuine BMW Solenoid Valve - 11368605123 - N55

Genuine BMW Solenoid Valve (Solv)
 

When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.

This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E70 X5,E71 X6,E82,E90,E92,E93,F01,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F32,F33,F34,F36,F80 M3,F82 M4,F83

Fits BMW Engines including:
N55,N63,N63N,S55,S63,S63N

 

Genuine BMW
Part #: 11368605123
Price: $156.26 (USD) 
$197.26 (21% off MSRP)
In Stock
Free Shipping Free Shipping
Quantity: