Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW F02 Performance Flash Software, 2005+ Models

BMW F02 Performance Flash Software, 2005+ Models The Fastest Way To More Power - Up To 120hp!!!

Our Performance Software makes more horsepower and torque with no downsides! Performance software is the icing on the cake, the finishing touch, or the capstone for your BMW tuning project. Software ties it all together - maximizing output from upgrades where the factory software can't keep up. The factory software is actually programmed around 87 octane which de-tunes the performance of the car. Our software is set to 91 as a mimimum, allowing us to be more aggressive with the programming. We can refine and adjust the factory limitations, opening up the potential for more horsepower or refinement from your current upgrades. We also tune the software to fix defects and rough edges in the stock software, making the car easier and more enjoyable to drive.

We have been tuning BMW software since 1995, making us one of the most experienced BMW tuners in North America. Over the years we have experimented and tested many different forms and brands of performance software, including developing our own on our Dynapack chassis dyno. Our Performance Software catalog includes tunes and upgrades that best suit your BMW and your upgrade goals.

Turner Motorsport Performance Flash Software features:
+ dyno developed, real-world tested
+ ignition and fuel timing adjustments
+ cam timing, including VANOS and Valvetronic
+ raised rev limit*
+ top speed de-limited*
+ part throttle and full throttle mapping
+ improved throttle response
+ specific software for most major upgrades - cold-air intakes, sport exhaust, etc
+ race software for removing catalytic converters**

* - on select models
** - not legal for street use, emissions liability waiver required
You're currently viewing parts for your (F02) 7-Series LWB 2009+. Reset your chassis
For accurate results, specify your model below.

F01-F13 640/740 -6/2014 DINANTRONICS Stage 1 Performance Tuner

For vehicles with a production date up to 06/2014
F01-F13 640/740 -6/2014 DINANTRONICS Stage 1 Performance Tuner

The Dinantronics Power Module is the least invasive way of getting more power from your F06/F10/F13. The Dinan tuner box plugs into the existing sockets on your engine computer(s). The original wiring harness plugs into the Dinan tuner box. There is no cutting or splicing into wires and the whole harness is completely reversible at any time. Dinan has shown a gain of 40hp and 57ft-lbs of torque with this system.

Because the Dinantronics module plugs directly into the engine computer, it can control the data from every sensor on the engine - not just the two or three that other piggyback-style modules use. Instead of only modifying a boost and RPM sensor, the Dinan power module sends a modified signal for fuel and ignition tables, target Lambda (AFR), exhaust temperature, knock sensors, and more. It has the ability to correct short term fuel trim and ignition timing errors so even as the boost increases through the whole RPM range the engine mapping remains where it should. Not only does it make a lot of peak power, but it's also a smooth and consistent power gain over the entire RPM band. The Dinan tuner module is the most sophisticated on the market and is the only one that is 50-state legal.

Installation is plug and play but requires access to the entire engine compartment. The engine computer(s) is part of the intake manifold so access is tight. The Dinan module is installed under the radiator support and the harness has to be run to each computer. Detailed instructions are included but professional installation is strongly advised if you're not used to working around your engine.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The Dinan tuner is worth 3 point towards your Dinan badge.

This item fits the following BMWs:
2012-6/2014 F06 BMW 640i 640iX
2012-6/2014 F12 F13 BMW 640i 640iX
2009-6/2014 F01 F02 BMW 740i 740Li

Dinan
Part #: D440-1642-ST1
Price: $2120.77 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
AC Schnitzer Performance Module

This Performance Module is a direct plug-in to the existing engine harness for a factory appearance and fitment and an instant power increase without risk. This offers more power and torque without the hassle of an in-depth, time-consuming install! It installs in less than 30 minutes and is completely reversible which makes this the easiest and most effective power upgrade you will ever make on this car. If you're looking for a substantial bump in power output, with minimal downtime for installation, full serviceability, and can be reverted back to stock then the AC Schnitzer power module is the way to go! 

Schnitzer got it's start racing BMW's in 1967 and has since gone onto win many championships in DTM, WTCC and other touring car series. In 1987 AC Schnitzer started manufacturing custom high performance products for BMW's using their knowledge from years of racing and winning with BMW's. AC Schnitzer offers the highest quality components for your BMW. 

AC Schnitzer
Part #: 110082340-48
Price: $4695.00 (USD) 
Direct Ship
Quantity:   
F01/F02 760i/Li Turner Performance Module PLUG IN AND PLAY WITH POWER!
Max HP gain =  80 hp
Max Trq gain =  100 ft-lbs
Plug And Play Engine Harness!
More Boost With Factory Driveability!

This Performance Module is a direct plug in to the existing engine harness for a factory appearance and fitment and an instant 80hp gain and 100ft-lbs of torque. These are simply amazing gains! It installs in approximately one hour and is completely reversible which makes this the easiest and most effective power upgrade you will ever make on this car. If you're looking for a substantial bump in power output, with minimal downtime for installation, full serviceability, and can be reverted back to stock then the Turner power upgrade is unbeatable! Also included is a throttle enhancement module that can be installed to improve throttle response.

Turner's 760 upgrade solution is a tuning module that plugs in ahead of the engine computer on the wiring harness. It's not the run-of-the-mill 'piggy-back' style upgrades you find for less. Inside our module is a sophisticated control unit that is designed to complement and work with the factory ECUs. The maps and algorithms within the control unit have been optimized for the N74 engine, sending revised fuel and ignition parameters to the stock ECUs to control boost depending on load, engine speed, and other factors. Our control unit integrates seamlessly to extract more power and torque without faults and errors - just smooth power and torque. The harness has factory-style weather-proof plugs to connect in-line with each boost pressure sensor and the camshaft position sensor on the engine.

All of the factory safeguards remain in place, including overload protection and warm-up protocols to preserve longevity and factory drive-ability. One of the key advantages of this type of system is that it is unaffected by factory BMW updates and service. If BMW updates the computer software to fix any small bugs or issues, the Turner performance upgrade is not lost or overwritten. This is key on new models because BMW is constantly releasing small software updates. All of the factory diagnostics and service access is retained. The Turner Module is undetectable to plug-in diagnostic readers and it leaves no traces behind. A valet connector is included and installs in minutes to bypass the performance module and revert the car to factory settings. With the valet plug installed the engine computer will use the stock maps instead of getting modified data from the Turner module.

This item fits the following BMWs:
2010+  F01 F02 BMW  760li
Turner Motorsport
Part #: TPM-N74
Price: $995.00 (USD) 
Ships in 2 Days
Free Shipping Free Shipping
Quantity:   
aFe Scorcher Programmer Upgrade - N55 - E82 135i, E9X 335i, F30 335i, F32 435i, F10 535i, E70 X5 35i, E71 X6 35i As Used on our Project F30 335i THE EASIEST WAY TO MORE POWER
HP gain = up tp 40 hp
Trq gain = up tp 80 ft-lbs
Plug And Play Engine Harness!
Power Without Worry!


There's no secret to getting additional power from a turbo engine - turn up the boost! But it's easy to take things too far and become "boost drunk". If what you're after is a generous bump in power without worrying about reliability, compromises, or additional modifications the aFe Power Scorcher is perfect for you. We've tried the Scorcher in a number of different BMWs and can report back that it works flawlessly!

Our findings:
  • Incredibly simple installation - by the third car we tested with we had the install down to 5 minutes!
  • High build quality - it looks and feels like a real part - not homemade like others we have seen
  • Immediate power gains - right from our parking lot we could feel the substantial difference
  • Affordable power - great bang for the buck
    The Scorcher is a plug-and-play tuning module that installs on the engine wiring harness and modifies the signals from the manifold pressure sensors. The new signals are then sent to the engine computer which increases boost based on the modified signal. The power gains are instantly noticeable and the module has been fully engineered to deliver a smooth and reliable power boost over all RPM. aFe developed this module upgrade on their in-house Mustang and Dynojet dynos as well as using them on their own BMW 135s and 335s. There are other products that give more power (for additional cost and complexity) but more boost also brings more complications. This is all of the power you need without additional drama and trickery. The Scorcher can be used on its own or combined with other aFe Power products for the total package.

    The install is very easy with no cutting or modification to existing components. Unplug the harness from your MAP sensors and plug it into the Scorcher module. Then plug the Scorcher harness into the MAP sensors. Mount the module wherever you wish (Velcro and zip ties included). A blue LED lets you know the module is plugged in correctly and functioning. You can also revert back to stock just as easily! The Scorcher is built with a 0.1% tolerance on critical components. Each connector is an OE type for the best and most secure fitment and they use high quality wiring with excellent heat and chemical resistance. The module box is aluminum with a hardcoat anodize finish. This is way beyond the other 'resistor in a box' products on the market. aFe warranties the complete unit for two years.

    BMW used two different TMAP sensors on the intake pipe. You will need to confirm which TMAP sensor is installed on your car. Refer to this image, and the drawing on the right, for more information: click here.

    This item fits the following BMWs:
    2011-2013 E82 BMW 135i
    2014+ F22 BMW M235i M235i xDrive
    2011 E90 BMW 335i 335xi 335i xDrive - Sedan
    2011-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
    2011-2013 E93 BMW 335i - Convertible
    2012+ F30 BMW 335i 335i xDrive - Sedan
    2014+ F34 BMW 335i xDrive GT - Gran Tourismo
    2013+ F32 BMW 435i 435i xDrive - Coupe
    2013+ F33 BMW 435i Convertible - Convertible
    2014+ F36 BMW 435i Gran Coupe 435i xDrive Gran Coupe
    2010+ F07 BMW 535i GT, 535i xDrive GT
    2011+ F10 BMW 535i 535i xDrive
    2012+ F12 BMW 640i 640i xDrive
    2013+ F06 BMW 640i Gran Coupe 640i xDrive Gran Coupe
    2012+ F01 BMW 740i 740li 740li xDrive
    2013+ E84 BMW X1 xDrive35i
    2011+ F25 BMW X3 xDrive35i
    2015+ F26 BMW X4 xDrive35i
    2011+ E70 BMW X5 xDrive35i
    2014+ F15 BMW X5 sDrive35i X5 xDrive35i
    2011+ E71 BMW X6 xDrive35i
  • AFE
    Part #: 77-4630x
    Price: $404.10 (USD) 
    $449 (Sale - Save 10%)
    Direct Ship
    Free Shipping Free Shipping
    AC Schnitzer Performance Module

    This Performance Module is a direct plug-in to the existing engine harness for a factory appearance and fitment and an instant power increase without risk. This offers more power and torque without the hassle of an in-depth, time-consuming install! It installs in less than 30 minutes and is completely reversible which makes this the easiest and most effective power upgrade you will ever make on this car. If you're looking for a substantial bump in power output, with minimal downtime for installation, full serviceability, and can be reverted back to stock then the AC Schnitzer power module is the way to go! 

    Schnitzer got it's start racing BMW's in 1967 and has since gone onto win many championships in DTM, WTCC and other touring car series. In 1987 AC Schnitzer started manufacturing custom high performance products for BMW's using their knowledge from years of racing and winning with BMW's. AC Schnitzer offers the highest quality components for your BMW. 

    AC Schnitzer
    Part #: 121410400-48
    Price: $4695.00 (USD) 
    Direct Ship
    Quantity:   

    F01-F13 640/740 7/2014+ DINANTRONICS Stage 1 Performance Tuner

    For vehicles with a production date from 07/2014
    F01-F13 640/740 7/2014+ DINANTRONICS Stage 1 Performance Tuner

    The Dinantronics Power Module is the least invasive way of getting more power from your F06/F10/F13. The Dinan tuner box plugs into the existing sockets on your engine computer(s). The original wiring harness plugs into the Dinan tuner box. There is no cutting or splicing into wires and the whole harness is completely reversible at any time. Dinan has shown a gain of 40hp and 57ft-lbs of torque with this system.

    Because the Dinantronics module plugs directly into the engine computer, it can control the data from every sensor on the engine - not just the two or three that other piggyback-style modules use. Instead of only modifying a boost and RPM sensor, the Dinan power module sends a modified signal for fuel and ignition tables, target Lambda (AFR), exhaust temperature, knock sensors, and more. It has the ability to correct short term fuel trim and ignition timing errors so even as the boost increases through the whole RPM range the engine mapping remains where it should. Not only does it make a lot of peak power, but it's also a smooth and consistent power gain over the entire RPM band. The Dinan tuner module is the most sophisticated on the market and is the only one that is 50-state legal.

    Installation is plug and play but requires access to the entire engine compartment. The engine computer(s) is part of the intake manifold so access is tight. The Dinan module is installed under the radiator support and the harness has to be run to each computer. Detailed instructions are included but professional installation is strongly advised if you're not used to working around your engine.

    For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The Dinan tuner is worth 3 point towards your Dinan badge.

    This item fits the following BMWs:
    7/2014+ F06 BMW 640i 640iX
    7/2014+ F12 F13 BMW 640i 640iX
    7/2014+ F01 F02 BMW 740i 740Li

    Dinan
    Part #: D440-1643-ST1
    Price: $2120.77 (USD) 
    Direct Ship
    Free Shipping Free Shipping
    Quantity:   
    aFe POWER Scorcher GT Module - 550i 650i 750i N63 2011.5-2012

    THE EASIEST WAY TO MORE POWER
    HP gain = up tp 40 hp
    Trq gain = up tp 60 ft-lbs
    Plug And Play Engine Harness!
    Power Without Worry!

    There's no secret to getting additional power from a turbo engine - turn up the boost! But it's easy to take things too far and become "boost drunk". If what you're after is a generous bump in power without worrying about reliability, compromises, or additional modifications the aFe Power Scorcher is perfect for you. We've tried the Scorcher in a number of different BMWs and can report back that it works flawlessly!

    Our findings:

    • Incredibly simple installation - by the third car we tested with we had the install down to 5 minutes!
    • High build quality - it looks and feels like a real part - not homemade like others we have seen
    • Immediate power gains - right from our parking lot we could feel the substantial difference
    • Affordable power - great bang for the buck

    The Scorcher is a plug-and-play tuning module that installs on the engine wiring harness and modifies the signals from the manifold pressure sensors. The new signals are then sent to the engine computer which increases boost based on the modified signal. The power gains are instantly noticeable and the module has been fully engineered to deliver a smooth and reliable power boost over all RPM. aFe developed this module upgrade on their in-house Mustang and Dynojet dynos as well as using them on their own BMWs. There are other products that give more power (for additional cost) but more boost also brings more complications. This is all of the power you need without additional drama and trickery. The Scorcher can be used on its own or combined with other aFe Power products for the total package.

    The install is very easy with no cutting or modification to existing components. Unplug the harness from your MAP sensors and plug it into the Scorcher module. Then plug the Scorcher harness into the MAP sensors. Mount the module wherever you wish (Velcro and zip ties included). A blue LED lets you know the module is plugged in correctly and functioning. You can also revert back to stock just as easily! The Scorcher is built with a 0.1% tolerance on critical components. Each connector is an OE type for the best and most secure fitment and they use high quality wiring with excellent heat and chemical resistance. The module box is aluminum with a hardcoat anodize finish. This is way beyond the other 'resistor in a box' products on the market. aFe warranties the complete unit for two years.

    AFE
    Part #: 77-46321
    Price: $539.10 (USD) 
    $599.00 (Sale - Save 10%)
    Direct Ship
    Quantity:   
    AC Schnitzer Performance Module

    This Performance Module is a direct plug-in to the existing engine harness for a factory appearance and fitment and an instant power increase without risk. This offers more power and torque without the hassle of an in-depth, time-consuming install! It installs in less than 30 minutes and is completely reversible which makes this the easiest and most effective power upgrade you will ever make on this car. If you're looking for a substantial bump in power output, with minimal downtime for installation, full serviceability, and can be reverted back to stock then the AC Schnitzer power module is the way to go! 

    Schnitzer got it's start racing BMW's in 1967 and has since gone onto win many championships in DTM, WTCC and other touring car series. In 1987 AC Schnitzer started manufacturing custom high performance products for BMW's using their knowledge from years of racing and winning with BMW's. AC Schnitzer offers the highest quality components for your BMW. 

    AC Schnitzer
    Part #: 1100230340-48
    Price: $4695.00 (USD) 
    Direct Ship
    Quantity:   
    AC Schnitzer Performance Module

    This Performance Module is a direct plug-in to the existing engine harness for a factory appearance and fitment and an instant power increase without risk. This offers more power and torque without the hassle of an in-depth, time-consuming install! It installs in less than 30 minutes and is completely reversible which makes this the easiest and most effective power upgrade you will ever make on this car. If you're looking for a substantial bump in power output, with minimal downtime for installation, full serviceability, and can be reverted back to stock then the AC Schnitzer power module is the way to go! Further yet, AC Schnitzer offers a full 24-month warranty!

    Schnitzer got it's start racing BMW's in 1967 and has since gone onto win many championships in DTM, WTCC and other touring car series. In 1987 AC Schnitzer started manufacturing custom high performance products for BMW's using their knowledge from years of racing and winning with BMW's. AC Schnitzer offers the highest quality components for your BMW. 

    AC Schnitzer
    Part #: 1100287310-24
    Price: $3995.00 (USD) 
    Direct Ship
    Quantity:   
    AC Schnitzer Performance Module

    This Performance Module is a direct plug-in to the existing engine harness for a factory appearance and fitment and an instant power increase without risk. This offers more power and torque without the hassle of an in-depth, time-consuming install! It installs in less than 30 minutes and is completely reversible which makes this the easiest and most effective power upgrade you will ever make on this car. If you're looking for a substantial bump in power output, with minimal downtime for installation, full serviceability, and can be reverted back to stock then the AC Schnitzer power module is the way to go! 

    Schnitzer got it's start racing BMW's in 1967 and has since gone onto win many championships in DTM, WTCC and other touring car series. In 1987 AC Schnitzer started manufacturing custom high performance products for BMW's using their knowledge from years of racing and winning with BMW's. AC Schnitzer offers the highest quality components for your BMW. 

    AC Schnitzer
    Part #: 121410380-01-48
    Price: $4695.00 (USD) 
    Direct Ship
    Quantity:   

    N63 Early DINANTRONICS Stage 1 Performance Tuner

    For vehicles with a production date up to 06/2013
    N63 Early DINANTRONICS Stage 1 Performance Tuner

    The Dinantronics Power Module is the least invasive way of getting more power from your 550/650/750. The Dinan tuner box plugs into the existing sockets on your engine computer(s). The original wiring harness plugs into the Dinan tuner box. There is no cutting or splicing into wires and the whole harness is completely reversible at any time. Dinan has shown a gain of 73hp and 67ft-lbs of torque with this system.

    Because the Dinantronics module plugs directly into the engine computer, it can control the data from every sensor on the engine - not just the two or three that other piggyback-style modules use. Instead of only modifying a boost and RPM sensor, the Dinan power module sends a modified signal for fuel and ignition tables, target Lambda (AFR), exhaust temperature, knock sensors, and more. It has the ability to correct short term fuel trim and ignition timing errors so even as the boost increases through the whole RPM range the engine mapping remains where it should. Not only does it make a lot of peak power, but it's also a smooth and consistent power gain over the entire RPM band. The Dinan tuner module is the most sophisticated on the market and is the only one that is 50-state legal.

    Installation is plug and play but requires access to the entire engine compartment. The engine computer(s) is part of the intake manifold so access is tight. The Dinan module is installed under the radiator support and the harness has to be run to each computer. Detailed instructions are included but professional installation is strongly advised if you're not used to working around your engine.

    For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The Dinan tuner is worth 3 point towards your Dinan badge.

    This item fits the following BMWs:
    2011-6/2013 F10 BMW 550i 550xi
    2012-6/2013 F06 BMW 650i 650iX
    2012-6/2013 F12 F13 BMW 650i 650iX
    2009-6/2013 F01 F02 BMW 750i 750Li 750iX 750LiX

    Dinan
    Part #: D440-1634-ST1
    Price: $2651.22 (USD) 
    Direct Ship
    Free Shipping Free Shipping
    Quantity:   
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook