BMW Anti-Freeze and Coolant for BMW 5 Series F10 (2011-2016)

Clear BMW chassis

Schwaben Oil Storage Catch Can - 10-Liter
Schwaben - Corporate Logo
T#:370506
Part#: POC-10
In Stock
Sale - Save 25% $19.95
$14.96
Free Shipping on orders $99 and up
Sale - Save 25% $19.95
$14.96
Free Shipping on orders $99 and up

Large capacity oil drain catch can lets you perform a mess-free oil change and dispose of your drain oil responsibly.

Features:

  • Made from rugged ABS
  • 10 liter capacity (large enough to hold two oil changes from most passenger cars and light trucks)
  • Large double handles and drain spout with screw cap
  • Fill and vent plugs have o-ring seals to prevent leakage

BMW Coolant / Antifreeze
Genuine BMW - Corporate Logo
T#:391360
Part#: BMW-COOLANT
In Stock
Starting at $9.39
Free Shipping on orders $99 and up

The use of coolant/anti-freeze that meets BMW specs will ensure sufficient cooling in summer and protection against freeze-ups in winter. BMW antifreeze/coolant will also guard your vehicle's various engine components against corrosion, while providing critical lubrication for water pump bearings. BMW anti-freeze / coolant will prevent excessive silicate gel precipitation, which may cause plugging of the cooling system and lead to more extensive repairs. For proper maintenance we recommend that your BMW's cooling system be drained and refilled every two years with a coolant that matches BMW spec. It was developed to be compatible with BMW's aluminum radiators, and is nitrite- and phosphate-free to prevent excessive silicate build-up.

The following coolant products meet BMW specs for all BMW models, regardless of year or engine:

  • Genuine BMW (1 liter or 1 gallon containers)
  • Vaico (Made in Germany). Handy 1.5L container
  • Rowe (Made in Germany), OEM supplier to BMW

Note that most BMW cooling systems take 8+ liters of a 50/50 mix of BMW coolant and distilled water. BMW sells this coolant in unmixed containers - 1 liter for top off or 1 gallon (1 gallon = 3.79 liters). Distilled water can be purchased at most grocery stores.

Coolant additives are also available to enhance factory cooling properties. Red Line Water Wetter and Motul MoCool are designed specifically to raise boiling points and reduce combustion chamber temperatures. These can be key to reducing engine knock/detonation on track cars that see exceptionally high underhood temperatures.

BMW Coolant / Antifreeze, 1 Gallon Jug
Genuine BMW - Corporate Logo
T#:1474
Part#: 82141467704
In Stock
Sale - Save 16% $24.50
$20.48
Free Shipping on orders $99 and up
Sale - Save 16% $24.50
$20.48
Free Shipping on orders $99 and up
The use of Original BMW Anti-Freeze/Coolant will ensure sufficient cooling in summer and protection against freeze-ups in winter. BMW Antifreeze/Coolant will also guard your vehicle's various engine components against corrosion.

BMW Anti-Freeze/ Coolant will prevent excessive silicate gel precipitation, which may cause plugging of the cooling system and lead to more extensive repairs. For proper maintenance we recommend that your BMW's cooling system be drained and refilled every two years with Original BMW Anti-Freeze/Coolant. It was developed to be compatible with BMW's aluminum radiators, and is nitrite- and phosphate-free to prevent excessive silicate build-up.

Note that most BMW cooling systems take 8+ liters of a 50/50 mix of BMW coolant and distilled water. BMW sells this coolant in 1 gallon jugs (1 gallon = 3.79 liters), so plan accordingly.

Red Line Water Wetter Coolant Additive
Redline - Corporate Logo
T#:394769
Part#: REDLINE5A
In Stock
Starting at $9.95
Free Shipping on orders $99 and up

All sets of 12 now 10% off regular price

Water Wetter is a unique wetting agent for cooling systems which reduces coolant temperatures by as much as 30*F. This liquid product can be used to provide rust and corrosion protection in plain water for racing engines, which provides much better heat transfer properties than glycol-based antifreeze. Or it can be added to new or used antifreeze to improve the heat transfer of ethylene and propylene glycol systems. Designed for modern aluminum, cast iron, copper, brass, and bronze systems.

We have been using RedLine Oil in our street cars and race cars for years. Hands-down, it is the Number One brand of high performance lubricant for BMWs.


MOTUL MoCOOL Radiator Additive - 500ml / 16.9 fl oz bottle
Motul - Corporate Logo
T#:2445
Part#: MOCOOL
In Stock
$14.95
Free Shipping on orders $99 and up
MoCOOL(r) is a radiator additive which will reduce cooling system temperature by as much as 15oC (30oF). Packaged in 500ml (16.9 fluid ounces) plastic bottles. Concentrated formula that is mixed with distilled water for immediate use. Mix with water at 5% (20:1) Do not use straight out of the bottle.

TYPE OF USE: This performance additive offers better heat transfer than normal coolants. The unique formula also contains rust and corrosion inhibitors. Best used for overheating engines or racing conditions. Inhibits corrosion and water pump protection. Seal, rubber and plastic part friendly!

Designed to be used with pure water at a dilution of 5% (20:1) (for competition use where monoethyleneglycol is not allowed) or mix with your coolant at 5% of volume. Designed for aluminum, cast iron, copper, brass and bronze systems. MoCOOL(r) is compatible with antifreezes, including the new long-life versions and Original BMW antifreeze.
Rowe BMW Coolant/Antifreeze - 1 Gallon
ROWE - Corporate Logo
T#:363557
Part#: 82141467704
In Stock
$19.95
Free Shipping on orders $99 and up

Rowe is an OEM supplier to BMW among other German manufacturers and their coolant is a monoethylene glycol basis that meets BMW N60069.0 standards. It is free of nitrite, amine and phosphate, just like the OE BMW coolant, making it safe to use in all of BMW's aluminum radiator cores. Mix Rowe BMW coolant 1:1 with distilled water to provide anti-freeze protection to -35*F. Using the proper BMW coolant will ensure sufficient cooling in summer and protection against freeze-ups in winter. For proper maintenance we recommend that your BMW's cooling system be drained and refilled every two years.

Note that most BMW cooling systems take 8+ liters of a 50/50 mix of coolant and distilled water (1 gallon = 3.79 liters), so plan accordingly.


BMW Antifreeze Coolant - 1 Liter Bottle
Genuine BMW - Corporate Logo
T#:11526
Part#: 82142209769
In Stock
$9.39
Free Shipping on orders $99 and up
This 1 liter bottle is perfect for topping of the coolant in your BMW. This is The use of Original BMW Anti-Freeze/Coolant will ensure sufficient cooling in summer and protection against freeze-ups in winter. BMW Antifreeze/Coolant will also guard your vehicle's various engine components against corrosion. BMW Anti-Freeze/ Coolant will prevent excessive silicate gel precipitation, which may cause plugging of the cooling system and lead to more extensive repairs. For proper maintenance we recommend that your BMW's cooling system be drained and refilled every two years with Original BMW Anti-Freeze/Coolant. It was developed to be compatible with BMW's aluminum radiators, and is nitrite- and phosphate-free to prevent excessive silicate build-up. Note that most BMW cooling systems take 8+ liters of a 50/50 mix of BMW coolant and distilled water. BMW sells this coolant in 1 liter bottles, so plan accordingly. We also sell the 1 gallon jugs of BMW Anti-Freeze
Evans High Performance Waterless Coolant - 1 Gallon
Evans - Corporate Logo
T#:553533
Part#: EC53001
In Stock
$46.52
Free Shipping on orders $99 and up

Evans High Performance Waterless Coolant is a proprietary base fluid with an inhibitor package designed for all gasoline, light duty diesel, LP, and CNG engines. Evans does not contain water, giving it the ability to protect your engine below -40AdegF and above 375AdegF. Its higher boiling point eliminates the risk of overheating, as well as Boil-Over and After-Boil. Without boiling there is effectively no pressure in the cooling system, thus reducing stress on the system.This is particularly important when your vehicle is under constant load for extended periods of time, such as on the track or during spirited driving. Evans allows your vehicle to continue cooling when your engine is at high temperatures - Evans does not develop air pockets that prevent traditional coolants from flowing at high temperatures.

While Evans is ideal for both daily driven vehicles and track vehicles, it is also great for vehicles that spend most of their time in storage. Evans Waterless Coolant does not have any of the corrosive properties of traditional coolant - it will not separate and cause corrosion while your vehicle sits in storage. Evans is practical in most BMW applications.

Features:

Benefits: Reduces System Pressure, Prevents Overheating, Maximizes BHP
Boiling Point: Above 375AdegF
Antifreeze Properties: Protects below -40AdegF
Corrosive Properties: Unbeatable protection against corrosion and electrolysis
Life Span: Protects for life of the engine
Toxicity: Low Toxicity
Eliminates Overheating: Evans Waterless Coolants have a boiling point above 375AdegF and will not vaporize, thus eliminating overheating, boil-over and after-boil.
Reduces Pressure: Evans Waterless Coolants generate very low vapor pressures reducing stress on engine cooling system components.
Increases BHP: Evans Waterless Coolants eliminate pre-ignition and detonation caused by overheating - thus improving combustion efficiency and delivering more power.

NOTE: To ensure optimum performance, Evans recommends flushing your cooling system with PREP Fluid: T#553532 before filling with Waterless Coolant


Evans Waterless Coolant PREP Fluid - 1 Gallon
Evans - Corporate Logo
T#:553532
Part#: EC42001
On Order, ETA Dec 17, 2018
$33.95
Free Shipping on orders $99 and up

When switching to Evans Waterless Coolant - it is necessary to make sure your system contains <3% water post-conversion.

Evans Prep Fluid is a Hygroscopic waterless cooling system flush designed to remove any remaining water left after draining all conventional anti-freeze and water from your BMW's engine. Evans Prep Fluid should be used to complete a successful conversion to Evans coolant, but it is not a substitute to a thorough drain of all cooling system components via a block drain. Evans recommends running Prep Fluid through your cooling system before refilling with Evans High Performance Waterless Coolant to ensure your water content is below 3% (54.4 Brix). This can be tested with an Analog Refractometer: T#553530

Features:

Properties: Hygroscopically absorbs water.
When to use: After draining 50/50 coolant from the cooling system.
Benefits: Ensures all residual water is removed from the system.

NOTE: Prep Fluid is not to be used as coolant. This product flushes water out of your system to successfully convert to Evans Waterless Coolant.


Select Vehicle

Category

  • Anti-Freeze and Coolant

Price

$
$

Special Offers