Track Safety for BMW 5 Series F10 (2011-2016)

Clear BMW chassis
If you're like us, then you enjoy taking your vehicle to the track whenever you get a chance. Whether you have a fully built track slayer or if you just enjoy taking your daily driver to autocross events, Turner Motorsport carries what you need to pass tech and, more importantly, keep yourself safe in the event of an accident.

H3R Performance HalGuarda,,C/ Clean Agent 2.5lb Fire Extinguisher - Black
H3R Performance HalGuarda,,C/ Clean Agent 2.5lb Fire Extinguisher - ...
Track days can come to an abrupt ending when dealing with...
H3R Performance - Corporate Logo
T#:402686
Part#: HG250B
In Stock
$224.95
Free Shipping

Track days can come to an abrupt ending when dealing with a vehicle fire. Causes can range from flammable fluids, such as leaking fuel, or overheating electronics and electrical shorts. Regardless of the cause, this can cause thousands of dollars of damage and can potentially become an immediate, life-threatening hazard if not properly handled. The best way to ensure your safety is to have a fire extinguisher on board that is made to put out any fires quickly and efficiently. You must also be certain that it is reliable enough to get the job done in an emergency. H3R Performance builds high quality extinguishers that feature strong steel cylinders, all metal valve construction, and aviation-quality steel mounting brackets all to make certain that this life saving device will function perfectly, without the worries of weak plastic valves or internals.

The HalGuarda,,C/ Clean Agent Extinguisher was specifically designed to combat fires in situations and places that water would only make worse, such as a fuel fire or electrical fires. These extinguishers contain HalotronA(r) 1, an electrically non-conductive "clean" extinguisher that rapidly turns into gas and leaves behind no damaging residue that would need to be cleaned up and is environmentally friendly. Thanks to its liquid to gas evaporation, it can get in to hard to reach areas to properly extinguish any and all fire sources. It has also be extensively tested by the military and FAA for its fire fighting ability and is now the main extinguisher used at airports around the world.

Features:

  • No thermal shock to electronics
  • No mess or damage to vehicle or surfaces
  • Liquefied gas extinguishes hard-to-reach fires
  • Does not impair operator's vision
  • EPA approved
  • Listed and rated 2B:C by Underwriters Laboratories
  • Rechargeable
  • Made in U.S.A.
  • 2-strap mounting bracket
  • 6' - 10' discharge range
  • High quality steel cylinders
  • All metal valve construction
  • Compact, lightweight, easy to use
  • Five year limited warranty

Specifications:

  • Extinguishing Agent -- HalotronA(r) 1
  • Agent (lb.) -- 2.5
  • Gross Weight (lb.) -- 5.4
  • U/L Rating -- 2 B:C
  • Height (inches) -- 14.8
  • Width (inches) -- 5.0
  • Depth-diameter (inches) -- 3.0
Sabelt Eye-Bolt Back Plate
Sabelt Eye-Bolt Back Plate
Eye-Bolt Back Plate 65 mm X 65 mm X 3 mm 7/16" U...
Sabelt - Corporate Logo
T#:559179
Part#: CCMI0016
Direct Ship
New Item
$6.00
$6.00

Eye-Bolt Back Plate 65 mm X 65 mm X 3 mm 7/16" UNF Thread Welded Nut, 40 mm

Sabelt FIA Approved 4-Point Saloon Racing Harness
Sabelt FIA Approved 4-Point Saloon Racing Harness
Sabelt is a global leader in development and manufacture ...
Sabelt - Corporate Logo
T#:552669
Part#: SAFIACCS4
Direct Ship
Starting at $260.00
Starting at $260.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Sabelt FIA approved racing harnesses are designed in a variety of configurations to suit your exact need and vehicle. Found in some of the fastest competition vehicles in the world, you can rest assured that you're being held securely by some of the finest belts available. Made by hand in Italy, quality and consistency are second to none. Whether you choose a four or six point, with aluminum or steel hardware each belt is designed to hold up to the rigors of the racetrack and to perform flawlessly in the event of a collision.

Features:

  • Shoulder straps: full 3aEURtmaEURtm width - steel adjuster
  • Shoulder fixing: snap hook - tribar
  • Lap belts: full 3aEURtmaEURtm width aEUR" steel adjuster Pull Up - snap hook fixing
  • Buckle fixed to lap belt

Westfield Eyebolt
Westfield Eyebolt
Length - 50 mm. Long7/16"Grade 8.8Sold Individua...
Sabelt - Corporate Logo
T#:559196
Part#: CCMI0017
Direct Ship
New Item
$7.50
$7.50

Length - 50 mm. Long

7/16"

Grade 8.8

Sold Individually


Sabelt Metric Eyebolt - M10 X 1.51 Thread Length 23 mm, 8.8.
Sabelt Metric Eyebolt - M10 X 1.51 Thread Length 23 mm, 8.8. ...
M10 X 1.51Thread Length - 23 mmGrade 8.8Sold Individually...
Sabelt - Corporate Logo
T#:559198
Part#: CCMI0023
Direct Ship
New Item
$6.00
$6.00

M10 X 1.51

Thread Length - 23 mm

Grade 8.8

Sold Individually

Standard Eye-Bolt
Standard Eye-Bolt
Diameter - 7/16" UNF Thread Length - 23 mm, Tot...
Sabelt - Corporate Logo
T#:559195
Part#: 407005
Direct Ship
New Item
$7.00
$7.00

Diameter - 7/16" UNF

Thread Length - 23 mm,

Total length - 25 mm

Grade 8.8

Sold Individually


RaceQuip 7/16-20 Long Eyebolt, Nut & Washer Harness Mount Hardware
RaceQuip 7/16-20 Long Eyebolt, Nut & Washer Harness Mount Hardwa...
RaceQuip recommends using their superior hardware and mou...
Racequip - Corporate Logo
T#:403229
Part#: 700060
Direct Ship
$7.95
$7.95

RaceQuip recommends using their superior hardware and mounting options for alternative mounting methods to ensure that the hardware will hold up to the demands in an accident. All of there hardware and brackets are constructed from drop-forged steel and are cadmium plated for strength and corrosion resistance.

This eyelet bolt attaches the harness bracket to the vehicle by being secured to the body or floor of the vehicle.

Sabelt ECE Approved 3-Point Clubman Belt
Sabelt ECE Approved 3-Point Clubman Belt
Sabelt is a global leader in development and manufacture ...
Sabelt - Corporate Logo
T#:552834
Part#: SACB4
Direct Ship
Starting at $165.00
Starting at $165.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Features:

  • 3 fixing points
  • Shoulder straps: 2" with steel adjusters
  • Lap belts: 2" with steel adjusters and clubman style buckle

Sabelt ECE Approved 4-Point Clubman Belt
Sabelt ECE Approved 4-Point Clubman Belt
Sabelt is a global leader in development and manufacture ...
Sabelt - Corporate Logo
T#:552832
Part#: SACB2
Direct Ship
Starting at $163.00
Starting at $163.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Features:

  • 4 fixing points
  • Shoulder straps: 2" with steel adjusters
  • Lap belts: 2" with steel adjusters and clubman style buckle
  • Shoulder pads included

RaceQuip 5 Point Latch And Link 3" Racing Harness - SFI 16.1 Approved
RaceQuip 5 Point Latch And Link 3" Racing Harness - SFI 16.1 Ap...
Racing harnesses are required at any respectable track or...
Racequip - Corporate Logo
T#:403220
Part#: 7110XX5PT
Direct Ship
Starting at $69.95
Starting at $69.95

Racing harnesses are required at any respectable track or strip, but they tend to run upwards of hundreds of dollars. RaceQuip designs and builds safety equipment for just this issue! Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

This Standard 5 Point Latch and Link Racing harness is RaceQuips most popular racing harness, priced at $74.99 or below while still being fully SFI 16.1 Approved.

All harness systems are constructed using drop-forged steel hardware for ultimate strength and reduced weight. All hardware is cadmium plated for added protection. They use only 3" premium polyester webbing and all belts are box-x pattern sewn to ensure uniform stitch length and strength. Belts and hardware are routinely tested to verify compliance with SFI 16.1 standards.

All of their harness sets feature a latch & link system to retain the belts. The latch & link system is distinguished by a pivoting "hammer," called a Duckbill, which locks all of the belts into place by snapping down into a detent. Both shoulder belts and the sub belt are hooked over the link; the link is inserted into the latch; the Duckbill is then brought down into and over the link, securely holding all of the pieces in place.

RaceQuip Latch & Link Harness Systems come as a "pull down" design. This means that the lap belts must be pulled down and away from the center latch mechanism to tighten. Since their belts are "double adjustable", lengths are easily adjusted on either end for ease of installation. Using the included three bar slide you can mount the belts by either wrapping them around a rollbar or by bolting them in place. Snap-in ends and eyebolts are sold separately if you want to install your belts in that manner.

Features and Specifications:

  • Exceeds SFI 16.1 Rating (SFI Tags Affixed)
  • NOT D.O.T. / FMVSS Certified for On Highway Use
  • Premium 3" Polyester Webbing
  • Twin Individual Shoulder Belts
  • Pull Down Style Lap Belt
  • 5 Point Design - Single 2" Crotch Sub Strap
  • 3" Hardware Ends Installed
  • Double Adjustable for Ease of Installation
  • Wrap Around or Bolt-in Mounting
  • Drop-Forged Steel Hardware (no bolts)
  • Shoulders Adjust from 20" to 62"
  • Lap Belt Adjusts 20" to 60"
  • Available in Black, Red, Blue, Yellow, Orange, Purple, Platinum, Green and Pink
  • Can Be Re-webbed (SFI) Upon Expiration
Sabelt Titan FIA Approved Racing Seat
Sabelt Titan FIA Approved Racing Seat
Sabelt's Titan seat is a more traditional and les...
Sabelt - Corporate Logo
T#:553645
Part#: RFSETITAN
Direct Ship
Starting at $795.00
Free Shipping
Starting at $795.00
Free Shipping

Sabelt's Titan seat is a more traditional and less aggressive design that makes it at home on the street as well as the track. Easy to get in and out of, this seat makes a perfect addition to the occasional track car or double-duty weekend warrior.

The shell is made from a lightweight gel-coated composite that holds the driver and protects along the sides of the seat as well. The shoulder bolsters are covered in a kinder point fabric which gives a "grippy" surface and helps to control upper body movement under high cornering forces. Moving further down the seat, the back and bottom are covered in a breathable mesh which helps to keep heat under control during long sessions. Leg bolstering is extra deep and will keep you in an upright and stable position and the VEP fabric covering ensures long-lasting durability. Finally, a crotch strap hole in the bottom of the shell makes this seat compatible with 6-point harnesses.

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Sabelt ECE Approved 3-Point Clubman Belt
Sabelt ECE Approved 3-Point Clubman Belt
Sabelt is a global leader in development and manufacture ...
Sabelt - Corporate Logo
T#:552835
Part#: SACB5
Direct Ship
Starting at $160.00
Starting at $160.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Features:

  • 3 fixing points
  • Shoulder straps: 2" with steel adjusters
  • Lap belts: 2" with steel adjusters and clubman style buckle


Sabelt ECE Approved 4-Point Clubman Belt
Sabelt ECE Approved 4-Point Clubman Belt
Sabelt is a global leader in development and manufacture ...
Sabelt - Corporate Logo
T#:552833
Part#: SACB3
Direct Ship
Starting at $165.00
Starting at $165.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

Features:

  • 4 fixing points
  • Shoulder straps: 2" with steel adjusters
  • Lap belts: 2" with steel adjusters and clubman style buckle
RaceQuip 5 Point Latch And Link HANS/HNR Racing Harness - SFI 16.1 Approved
RaceQuip 5 Point Latch And Link HANS/HNR Racing Harness - SFI 16.1 A...
Racing harnesses are required at any respectable track or...
Racequip - Corporate Logo
T#:403240
Part#: RQ5PTHANSHNR
Direct Ship
Starting at $89.95
Starting at $89.95

Racing harnesses are required at any respectable track or strip, but they tend to run upwards of hundreds of dollars. RaceQuip designs and builds safety equipment for just this issue! Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

The HANS/HNR harness set has narrow shoulder belts to better fit a head & neck restraint (HNR) like a HANS device.

All harness systems are constructed using drop-forged steel hardware for ultimate strength and reduced weight. All hardware is cadmium plated for added protection. They use only 3" premium polyester webbing and all belts are box-x pattern sewn to ensure uniform stitch length and strength. Belts and hardware are routinely tested to verify compliance with SFI 16.1 standards.

All of their harness sets feature a latch & link system to retain the belts. The latch & link system is distinguished by a pivoting "hammer," called a Duckbill, which locks all of the belts into place by snapping down into a detent. Both shoulder belts and the sub belt are hooked over the link; the link is inserted into the latch; the Duckbill is then brought down into and over the link, securely holding all of the pieces in place.

RaceQuip Latch & Link Harness Systems come as a "pull down" design. This means that the lap belts must be pulled down and away from the center latch mechanism to tighten. Since their belts are "double adjustable", lengths are easily adjusted on either end for ease of installation. Using the included three bar slide you can mount the belts by either wrapping them around a rollbar or by bolting them in place. Snap-in ends and eyebolts are sold separately if you want to install your belts in that manner.

Features and Specifications:

  • Exceeds SFI 16.1 Rating (SFI Tags Affixed)
  • NOT D.O.T. / FMVSS Certified for On Highway Use
  • Premium 3" Polyester Webbing
  • Twin Individual Shoulder Belts
  • 2" Shoulder Accomodates HNR / HANS Device
  • Pull Down Style Lap Belt
  • 5 Point Design - Single 2" Crotch Sub Strap
  • Hardware Ends Installed
  • Double Adjustable for Ease of Installation
  • Wrap Around or Bolt-in Mounting
  • Drop-Forged Steel Hardware (no bolts)
  • Shoulders Adjust from 20" to 62"
  • Lap Belt Adjusts 20" to 60"
  • Available in Black, Red, and Blue
  • Can Be Re-webbed (SFI) Upon Expiration
Sabelt Taurus FIA Approved Racing Seat
Sabelt Taurus FIA Approved Racing Seat
The Taurus racing seat from Sabelt starts with a classic ...
Sabelt - Corporate Logo
T#:553625
Part#: RFSETAURUS
Direct Ship
Starting at $895.00
Free Shipping
Starting at $895.00
Free Shipping

The Taurus racing seat from Sabelt starts with a classic shape and adds years of design and engineering excellence to bring a seat that is truly special.

The shell is made from a lightweight gel-coated composite that holds the driver and protects along the sides of the seat as well. Head protection is achieved by way of side bolstering the blocks both sides of the drivers head from impact and these extend down into the shoulder area. Speaking of the shoulder bolsters, these particular ones are covered in a kinder point fabric which gives a "grippy" surface and helps to control upper body movement under high cornering forces. Moving further down the seat, the back and bottom are covered in a breathable mesh which helps to keep heat under control during long sessions. Leg bolstering is extra deep and will keep you in an upright and stable position and the VEP fabric covering ensures long-lasting durability. Finally, a crotch strap hole in the bottom of the shell makes this seat compatible with 6-point harnesses.

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.


Sabelt Hero Racing Gloves - Red
Sabelt Hero Racing Gloves - Red
A proper pair of racing gloves can make all the differenc...
Sabelt - Corporate Logo
T#:552910
Part#: SATG9R
Direct Ship
Starting at $189.00
Starting at $189.00

A proper pair of racing gloves can make all the difference on your next track day or autocross event. Aside from the obvious protection they afford in an unfortunate situation, the grip and increase in control is a welcomed addition when you're wrestling the car around a complex corner or cone section. Furthermore, depending on what type of racing you do or what track you are at, proper gloves may be requirement of entry.

The TG-9 glove is a classic and simple design for those that want improved safety and grip without excess bulk. Silicon lining on the palm and fingers gives a "tacky" grip of the wheel without any loss of dexterity. The elasticated wrist gives a secure fit without the need for straps of velcro and the external stitching in the fingers and palm make this a glove that will be comfortable for however long your stint may be.

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.


Sabelt Challenge Racing Shoe - Red
Sabelt Challenge Racing Shoe - Red
Sabelt is a global leader in development and manufacture ...
Sabelt - Corporate Logo
T#:552905
Part#: SATB3RW
Direct Ship
Starting at $195.00
Starting at $195.00

Sabelt is a global leader in development and manufacture of original equipment car seats, seat belts, and motorsport products for racing activities. Through advanced and extensive crash test simulation, they are able to offer products that are proven to achieve the highest level of performance and safety.

The Challenge TB-3 racing shoe is a new design with a full suede upper. Sabelt's "Digital" sole design allows for the utmost freedom of movement and pedal feel, while keeping the weight down to a minimum. FIA 8856-2000 Homolgation allows these shoes to be used in motorsport.