click to Chat Live
Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart
Home
Categories
Specials Track Safety
  1. Fire Extinguishers & Mounts
  2. Harnesses & Harness Accessories
  3. Helmets
  4. Racing Seats
  5. Racing Shoes
Gifts & Clothing
  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages
Brakes
  1. Brake Overhaul Packages
  2. Brake Pads
  3. Brake Pad Sensors
  4. Brake Rotors
  5. StopTech Big Brake Kits
  6. Brembo Big Brake Kits
  7. Brake Fluid
  8. Brake Calipers
  9. Caliper Rebuild Kits
  10. Parking Brake Parts
  11. Brake Master Cylinders
  12. Brake Cooling Ducts & Backing Plates
  13. Brake Pads - Brembo GT BBK Calipers
  14. Brake Pads - StopTech BBK Calipers
  15. Hydraulic Hand Brakes
  16. Sparta Evolution Big Brake Kits
Car Care & Accessories
  1. Car Covers
  2. Wheel & Tire Cleaning
  3. Wax, Polish and Cleaning Supplies
  4. Detailing Gear
  5. Leather & Plastic Care
  6. Car Cleaning Supplies
  7. Chassis Paint, Coatings, Sealants, and Rust Conversion
Drivetrain
  1. Differential and Gearing Upgrades
  2. OEM Clutch Kits & Clutch Parts
  3. Performance Clutch Kits & Parts
  4. Stock OEM Dual Mass Flywheels
  5. Stainless Steel Clutch Lines
  6. Clutch Parts
  7. Axle Shafts
  8. Driveshafts
  9. Drivershaft Center Support Bearings
  10. Flex Discs & Guibos
  11. Shifter Bushings
  12. Transmission Mounts
  13. Transmission Parts
Engine Chips
  1. Performance Flash Software, 2005+ Models
  2. Sprint Booster Drive-by-Wire Module
  3. Burger Motorsports Tuning
Engine Parts
  1. Engine Performance Packages
  2. Cam Sprockets & Gears
  3. Water Pumps
  4. Thermostats
  5. Radiators & Cooling System Overhaul Kits
  6. Radiator Hoses, Cooling Hoses, & Hose Sets
  7. External Engine Parts
  8. Drive Belts & V-Belts
  9. Gaskets, Gasket Sets, Seals, & O-Rings
  10. Factory-Spec Replacement Turbos and Kits
  11. Crankcase Vent, PCV, and Oil Separator Systems
  12. Turbo Upgrades and Kits
  13. Motor Mounts
  14. Electrical Sensors, Switches, & Relays
  15. Ignition Parts
  16. Alternator & Alternator Parts
  17. Starter Motors & Starter Parts
  18. Fuel System Parts
  19. Internal Engine Parts
  20. Cylinder Head Parts & Head Bolts
  21. VANOS Units & Parts
  22. Oil Coolers & Oil Cooler Parts
Exhaust
  1. Supersprint Performance Exhaust Systems
  2. Performance Headers & Downpipes
  3. Turner Motorsport Performance Exhaust
  4. Akrapovic Performance Exhaust Systems
  5. Borla Performance Exhaust Systems
  6. Corsa Performance Exhaust Systems
  7. Dinan Free Flow Exhaust Systems
  8. Performance Exhaust Systems
  9. Exhaust System Upgrades
  10. Oxygen Sensor - O2 Sensors
  11. Exhaust Gaskets Hangers and Parts
Exterior / Body
  1. Black Grills
  2. Chrome Grills & Trim
  3. Emblems & Decals for Hood, Trunk, and Wheels
  4. Painted Reflectors
  5. Front Spoilers, Bumper Covers, & Air Dams
  6. Rear Spoilers, Rear Wings, & Aprons
  7. Body Trim Parts & Accessories
  8. Carbon Fiber Trunk Lids
  9. License Plate Brackets & License Plate Frames
  10. Mirror Kits & Mirror Parts
  11. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  12. Hood Pins and AeroCatch Latches
  13. Racing Tow Hooks and Tow Straps
  14. Aero & Body Kits
Intake
  1. aFe Cold-Air Intake Kits
  2. Turbos & Active Autowerke Superchargers
  3. Dinan Cold Air Intake Kits
  4. Gruppe M Cold-Air Intake Kits
  5. Performance Intake Kits
  6. aFe Performance Air Filters
  7. K&N Performance Air Filters
  8. Intake Cleaning & Recharging Kits
  9. Intake Manifold Components (DISA, Vacuum, CCV, Etc)
  10. BOV, Chargepipe, and Intercooler Upgrade Kits
  11. Mass Air Sensor & Air Flow Meters
  12. Intake Boots & Hoses
  13. Other Intake Kits
Interior
  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. Factory Steering Wheels
  7. Racing Steering Wheels
  8. Shift Knobs, Shift Boots, & Shift Handles
  9. Seats & Seat Accessories
  10. Seat Belts and Racing Harnesses
  11. Cup Holders and Storage
  12. Carbon Fiber Interior Parts
  13. Door Sill Strips
  14. Heating & Air Conditioning
  15. Interior Switches and Switchgear
  16. Sunshades & Windscreens
  17. Interior Trim & Accessories
  18. Fire Extinguishers and Mounts
  19. Helmets
Lighting
  1. Euro Clear Turn Signals, Parking Lights, & Tail Lights
  2. Turn Signals / Parking Lights
  3. Bulbs for Headlights, Turn Signals and Tail Lights
  4. Headlights, Headlight Lenses, & Headlight Parts
  5. Stealth Bulbs
  6. Universal
Maintenance
  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Fuel Filters
  5. Cabin Air Filters, Heppa Filters, & Microfilters
  6. Transmission Filter Kits & Transmission Service Parts
  7. Ignition Coils
  8. Spark Plugs
  9. Service Reset Tools & Fault Code Readers
  10. Anti-Freeze and Coolant
  11. Engine Oils - Genuine BMW and OEM
  12. Power Steering and Hydraulic Fluids
  13. Transmission and Gear Oil - Genuine BMW and OEM
  14. MOTUL Engine Oil and Gear Lubricants
  15. Red Line Oil & Fluids
  16. Liqui-Moly Oil and Additives
Suspension
  1. Shocks & Struts
  2. H&R Performance Springs
  3. Dinan Performance Springs
  4. Spring & Shock Packages
  5. Fortune Auto Coilover Kits
  6. Dinan Coilover Spring Kits
  7. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  8. H&R Coil Over Suspensions
  9. KW Coil Over Suspensions
  10. Sway Bar Kits
  11. Sway Bar Links & Sway Bar Parts
  12. Camber / Caster Kits
  13. Strut Braces & Stress Bars
  14. Control Arm Replacements & Upgrades
  15. Suspension Bushings & Mounts
  16. Wheel Bearings & Hub Assemblies
  17. Tie Rods & Steering Parts
  18. Coil Over Spring Hardware
  19. CATuned Coilover Kits
Wheels
  1. Apex Flow Formed Alloy Wheels
  2. Forgeline Custom Forged Alloy Wheels
  3. HRE FlowForm Performance Alloy Wheels
  4. Vorsteiner Wheels
  5. Rohana Wheels
  6. Dinan Performance Wheels
  7. Alpina Alloy Wheels
  8. Original BMW Wheels and Wheel Upgrades
  9. Turner Motorsport Wheel Spacers
  10. ECS Tuning Wheel Spacers
  11. H&R Wheel Spacers
  12. Wheel Bolts, Wheel Studs and Nuts
  13. Wheel Emblems, Caps, and Accessories
  14. High Performance Wheels
  15. BBS Wheels
  16. Tire Stickers
Tools
  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Coil Over Wrenches
  5. Cooling System Tools
  6. Cylinder Head and VANOS Tools
  7. Exhaust Tools
  8. Fan and Fan Clutch Tools
  9. Fault Code Readers and OBD Scan Tools
  10. Fuel System Tools
  11. Genuine BMW Tool Kits
  12. Oil Service Tools
  13. Schwaben Lighting
  14. Sockets
  15. Spark Plug Sockets
  16. Transmission and Differential Tools
  17. Wheel Pin Tools
  18. Workshop Chemicals
  19. Race Ramps
  20. Fender Rollers
  21. Vehicle Lifts
Clearance
Choose BMW
BMW 1 Series
  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+
BMW 2 Series
  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+
  3. (F87) M2 2016+
BMW 3 Series
  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+
BMW 4 Series
  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2015+
  3. (F34) 3-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+
  6. (F36) 4-Series Gran Coupe 2015+
BMW 5 Series
  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+
  10. (G30) 5-Series 2017+
BMW 6 Series
  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Convertible 2012+
  6. (F13) 6-Series Coupe 2012+
BMW 7 Series
  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+
(E31) 8 Series 1991-1997 BMW Classics (E9, Bavaria, Isetta, etc)
  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978
BMW X Series (SAV)
  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+
  12. (F48) X1 2016+
  13. (F48) X1 (2016+)
BMW Z Series
  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003
(E10) 1600-2002 / tii BMW i Series
  1. (I01) i3 2014+
  2. (I12) i8 2014+
MINI Cooper and Cooper S
Racing
Racing Home Racing News Racing Schedule Racing Photo Gallery
Gallery
Photo Gallery Wallpaper Project Cars
  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone
Video Gallery
Projects
Turner BMW i8 Turner BMW F80 M3 Turner BMW F82 M4 Turner BMW X5 M Turner BMW F22 2 Series Turner BMW F13 M6 Turner BMW F10 M5 Turner BMW F30 335i Turner BMW E9X M3 Turner BMW E92 335i Turner BMW E82 1 Series Turner BMW ActiveE Turner BMW E46 M3 Turner BMW E46 330i ZHP Turner BMW E36 M3 Turner BMW E30 M3 Turner MINI Cooper S McLaren F1 Turner BMW E92 M3 Lime Rock Turner BMW F80 M3 Silverstone
About Us
About Turner Motorsport Customer Feedback The Turner Team
  1. Open Positions
Returns Policy Shipping Info Contact Us Privacy Policy Security Policy FAQs

F10 Harnesses & Harness Accessories

You're currently viewing parts for your (F10) 5-Series 2011+. Reset your chassis
For accurate results, specify your model below.
RaceQuip 2

RaceQuip recommends using their superior hardware and mounting options for alternative mounting methods to ensure that the hardware will hold up to the demands in an accident. All of there hardware and brackets are constructed from drop-forged steel and are cadmium plated for strength and corrosion resistance.

This bracket attaches the harness to the vehicle via a mounting bolt.

Racequip
Part #: 700010
Price: $4.95 (USD) 
Direct Ship
Quantity:   
RaceQuip 3

RaceQuip recommends using their superior hardware and mounting options for alternative mounting methods to ensure that the hardware will hold up to the demands in an accident. All of there hardware and brackets are constructed from drop-forged steel and are cadmium plated for strength and corrosion resistance.

This bracket attaches the harness to the vehicle via a mounting bolt.

Racequip
Part #: 700020
Price: $5.95 (USD) 
Direct Ship
Quantity:   
RaceQuip 5 Point Latch And Link HANS/HNR Racing Harness - SFI 16.1 Approved

Racing harnesses are required at any respectable track or strip, but they tend to run upwards of hundreds of dollars. RaceQuip designs and builds safety equipment for just this issue! Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

The HANS/HNR harness set has narrow shoulder belts to better fit a head & neck restraint (HNR) like a HANS device.

All harness systems are constructed using drop-forged steel hardware for ultimate strength and reduced weight. All hardware is cadmium plated for added protection. They use only 3" premium polyester webbing and all belts are box-x pattern sewn to ensure uniform stitch length and strength. Belts and hardware are routinely tested to verify compliance with SFI 16.1 standards.

All of their  harness sets feature a latch & link system to retain the belts. The latch & link system is distinguished by a pivoting "hammer," called a Duckbill, which locks all of the belts into place by snapping down into a detent. Both shoulder belts and the sub belt are hooked over the link; the link is inserted into the latch; the Duckbill is then brought down into and over the link, securely holding all of the pieces in place.

RaceQuip Latch & Link Harness Systems come as a "pull down" design. This means that the lap belts must be pulled down and away from the center latch mechanism to tighten.  Since their belts are "double adjustable", lengths are easily adjusted on either end for ease of installation. Using the included three bar slide you can mount the belts by either wrapping them around a rollbar or by bolting them in place. Snap-in ends and eyebolts are sold separately if you want to install your belts in that manner. 

Features and Specifications:

  • Exceeds SFI 16.1 Rating (SFI Tags Affixed)
  • NOT D.O.T. / FMVSS Certified for On Highway Use
  • Premium 3" Polyester Webbing
  • Twin Individual Shoulder Belts
  • 2" Shoulder Accomodates HNR / HANS Device
  • Pull Down Style Lap Belt
  • 5 Point Design - Single 2" Crotch Sub Strap
  • Hardware Ends Installed
  • Double Adjustable for Ease of Installation
  • Wrap Around or Bolt-in Mounting
  • Drop-Forged Steel Hardware (no bolts)
  • Shoulders Adjust from 20" to 62"
  • Lap Belt Adjusts 20" to 60"
  • Available in Black, Red, and Blue
  • Can Be Re-webbed (SFI) Upon Expiration
Racequip
Part #: RQ5PTHANSHNR
Price: $89.95 (USD) 
Direct Ship
RaceQuip Pull Up HANS/HNR Camlock Racing Harness Sets - FIA 8853/98 Standard Approved

Racing harnesses are required at any respectable track or strip, but they tend to run upwards of hundreds of dollars. RaceQuip designs and builds safety equipment for just this issue! Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

RaceQuip FIA Camlock Harness Sets feature an ultra-lightweight magnesium alloy cam buckle with an activation lever that points downward. The FIA cam buckle utilizes a wide engagement cone for easy snap-in. A 45˚(right or left) unlatch movement prevents accidental opening and precise spring pressure provides a positive feel. All RaceQuip FIA Approved belts are constructed using premium 3” Polyester webbing that is transverse mono filament woven to provide increased strength and smoother edges. Premium aluminum shoulder adjusters come standard on all RaceQuip FIA approved harness sets.

The RaceQuip 751 Series Camlock belt set offers many professional features yet affordable pricing for the grassroots racer. This Camlock belt set comes in a six (6) point configuration with a Pull-Up  lap belt design. The harness sets pass the stringent FIA 8853/98 standard.

They start with a super-lightweight 165 gram magnesium alloy cam buckle. The buckle features an engagement cone which allows the belts to snap into the cam mechanism at angles of 21˚ left or right and 11˚ up and down for ease of engagement. Precise internal spring pressure allows a positive feel on the 45˚ (right or left) unlatch movement that reduces the chance of accidental opening.

Next, the forged SAE 4130 steel buckle hardware is sewn onto the premium 3” polyester webbing, called “transverse mono filament woven”, which means that there are mono filament fibers inter-woven into the straps in a pattern that transverses the standard weave. This design accomplishes two tasks - added strength and smoother edges on the belts. The harness sets also feature premium, lightweight, non-slip aluminum shoulder adjusters with easy lift grips. The lap belt adjusters utilize an anti-slip tensioner device as well. Heavy-duty forged steel SAE 1050 3" slide bars and 3" bolt on ends come already installed, but they can be easily removed if you prefer to mount your belts by wrapping them around a rollbar or you can change them out to snap-hook ends. Belt adjustment lengths are 20” to 68” for shoulders and 20” to 68” for the lap belt.

Features and Specifications:

  • Lightweight 165 gram Magnesium Alloy Cam Buckle
  • Exceeds Stringent FIA 8853/98 Standard (FIA Tags Affixed)
  • 6 Point Design - Dual 2" Crotch Strap
  • NOT D.O.T. / FMVSS Certified for On Highway Use
  • Pull Up Lap Belt Adjusters
  • Wide Engagement Cone For Easy Snap In
  • Precise Spring Pressure for a Positive Feel
  • 45° (right or left) Unlatch Movement Mitigates Accidental Opening
  • Heavy-Duty Drop-Forged Steel Hardware Ends Installed (no bolts)
  • Wrap Around or Bolt-in Mounting
  • Premium 3” Polyester Webbing
  • Transverse Mono Filament Woven for Increased Strength and Smoother Edges
  • Premium Aluminum Shoulder Adjusters
  • Shoulder Belt Adjustment Length is 20" to 68"
  • Lap Belt is Adjustable from 20" to 68"
  • Available in Black or Red
Racequip
Part #: RQFIASFICAMLOCK
Price: $249.95 (USD) 
Direct Ship
RaceQuip Dragster 4 Point U-Style Camlock Racing Harness - SFI 16.1 Approved

Racing harnesses are required at any respectable track or strip, but they tend to run upwards of hundreds of dollars. RaceQuip designs and builds safety equipment for just this issue! Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

RaceQuip Dragster U Style Camlock Harness Sets feature a durable aluminum cam buckle with an activation lever that points downward. The Sportsman cam utilizes a 45˚(right or left) unlatch movement to prevent accidental opening and the precise spring pressure provides a positive feel. The top shoulder strap is one continuous strap that mounts to a rail type dragster chassis

All harness systems are constructed using drop-forged steel hardware for ultimate strength and reduced weight. All hardware is cadmium plated for added protection. They use only 3" (2" for HNR) premium polyester webbing for strength. Belts and hardware are routinely tested to verify compliance with SFI 16.1 standards.

Features and Specifications:

  • Lightweight Aluminum Alloy Cam Buckle
  • Exceeds SFI 16.1 Rating (SFI Tags Affixed)
  • Designed for Rail Type Dragster Chassis
  • NOT D.O.T. / FMVSS Certified for on Highway Use
  • "U" Style Continuous Shoulder Belt
  • Single 2" Crotch Strap for 4-point Installation
  • Cam Buckle Stays Affixed to Crotch Strap
  • Pull Up Lap Belt Adjusters
  • Wide Engagement Cone For Easy Snap In
  • Precise Spring Pressure for a Positive Feel
  • 45° (right or left) Unlatch Movement Mitigates Accidental Opening
  • Heavy-Duty Drop-Forged Steel Hardware Ends Installed (no bolts)
  • Wrap Around or Bolt-in Mounting (Not Shoulder)
  • Premium 3” Polyester Webbing
  • Transverse Mono Filament Woven for Increased Strength and Smoother Edges
  • Shoulder Belt Adjustment Length is 20" to 40"
  • Lap Belt is Adjustable from 20" to 60"
  • Can Be Re-Webbed (SFI Cert.) Upon Expiration
  • Available in Black or Red
Racequip
Part #: RQDRUCAMLOCK
Price: $139.95 (USD) 
Direct Ship
RaceQuip 2

RaceQuip recommends using their superior hardware and mounting options for alternative mounting methods to ensure that the hardware will hold up to the demands in an accident. All of there hardware and brackets are constructed from drop-forged steel and are cadmium plated for strength and corrosion resistance.

This 3-Bar Slide Mount connects and secures the harness to the harness bracket or rollbar.

Racequip
Part #: 700085
Price: $4.95 (USD) 
Direct Ship
Quantity:   
RaceQuip 3

RaceQuip recommends using their superior hardware and mounting options for alternative mounting methods to ensure that the hardware will hold up to the demands in an accident. All of there hardware and brackets are constructed from drop-forged steel and are cadmium plated for strength and corrosion resistance.

This bracket attaches the harness to the vehicle via an eyelet mounting bolt.

Racequip
Part #: 700040
Price: $6.95 (USD) 
Direct Ship
Quantity:   
Race-Quip Black Racing Harness Pads

RaceQuip harness pads are made with flame retardant foam, covered with fire retardant Pyrovatex® and feature easy on/easy off hook and loop attachment. Designed for use with both 2" and 3" wide belts.  Available in black only.

Features:

  • Made with Flame Retardant Foam Padding
  • Features an Pyrovatex® FRC Cover with Hook and Loop Closure
  • Designed to Add Comfort When Using 2" or 3” Wide Belts
  • Available in Black Only
     
Racequip
Part #: 767001
Price: $14.95 (USD) 
Direct Ship
Quantity:   
RaceQuip FIA/SFI Approved Camlock Black Racing Harness Set

RaceQuip FIA Camlock Harness Sets feature an ultra-lightweight magnesium alloy cam buckle with an activation lever that points downward. The FIA cam buckle utilizes a wide engagement cone for easy snap-in. A 45˚(right or left) unlatch movement prevents accidental opening and precise spring pressure provides a positive feel. All RaceQuip FIA Approved belts are constructed using premium 3” Polyester webbing that is transverse mono filament woven to provide increased strength and smoother edges. Premium aluminum shoulder adjusters come standard on all RaceQuip FIA approved harness sets.

The RaceQuip 751 Series Camlock belt set offers many professional features yet affordable pricing for the grassroots racer. This Camlock belt set comes in a six (6) point configuration with a pull-down  lap belt design. The harness sets not only exceed the SFI 16.1 specification, they also pass the stringent FIA 8853/98 standard. This “dual certification” allows racers in some sanctions   (SCCA,  NASA, etc.) to use these belts for five years instead of just two.

They start with a super-lightweight 165 gram magnesium alloy cam buckle. The buckle features an engagement cone which allows the belts to snap into the cam mechanism at angles of 21˚ left or right and 11˚ up and down for ease of engagement. Precise internal spring pressure allows a positive feel on the 45˚ (right or left) unlatch movement that reduces the chance of accidental opening.

Next, the forged SAE 4130 steel buckle hardware is sewn onto the premium 3” polyester webbing, called “transverse mono filament woven”, which means that there are mono filament fibers inter-woven into the straps in a pattern that transverses the standard weave. This design accomplishes two tasks - added strength and smoother edges on the belts. The harness sets also feature premium, lightweight, non-slip aluminum shoulder adjusters with easy lift grips. The lap belt adjusters utilize an anti-slip tensioner device as well. Heavy-duty forged steel SAE 1050 3" slide bars and 3" bolt on ends come already installed, but they can be easily removed if you prefer to mount your belts by wrapping them around a rollbar or you can change them out to snap-hook ends. Belt adjustment lengths are 20” to 68” for shoulders and 20” to 68” for the lap belt.

Features and Specifications:

  • Lightweight 165 gram Magnesium Alloy Cam Buckle
  • Exceeds Stringent FIA 8853/98 Standard (FIA Tags Affixed)
  • Surpasses SFI 16.1 Rating (SFI Tags Affixed)
  • 6 Point Design - Dual 2" Crotch Strap
  • NOT D.O.T. / FMVSS Certified for On Highway Use
  • Pull Down Lap Belt Adjusters
  • Wide Engagement Cone For Easy Snap In
  • Precise Spring Pressure for a Positive Feel
  • 45° (right or left) Unlatch Movement Mitigates Accidental Opening
  • Cam Buckle Stays Affixed to the Right Lap Belt
  • Heavy-Duty Drop-Forged Steel Hardware Ends Installed (no bolts)
  • Wrap Around or Bolt-in Mounting
  • Premium 3” Polyester Webbing
  • Transverse Mono Filament Woven for Increased Strength and Smoother Edges
  • Premium Aluminum Shoulder Adjusters
  • Shoulder Belt Adjustment Length is 20" to 68"
  • Lap Belt is Adjustable from 20" to 68"
  • Can Be Re-Webbed (SFI Cert.) Upon Expiration
  • Available in Black Only
Racequip
Part #: 751001
Price: $199.95 (USD) 
Direct Ship
Quantity:   
RaceQuip 5 to 6 Point Latch And Link Harness Conversion - SFI 16.1 Approved

Racing harnesses are required at any respectable track or strip, but they tend to run upwards of hundreds of dollars. RaceQuip designs and builds safety equipment for just this issue! Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

RaceQuip now offers a conversion kit for those who are looking to upgrade their RaceQuip 5 point harness to a 6 point set. Designed for use with all RaceQuip latch & link harness sets, this conversion uses a "mustache bar" to separate and move the crotch straps outward. The kit includes hardware (no bolts) to allow the belts to be mounted as a wrap around or as a bolt-in. Available in black, red and blue.

All harness systems are constructed using drop-forged steel hardware for ultimate strength and reduced weight. All hardware is cadmium plated for added protection.

Features and Specifications:

  • Exceeds SFI 16.1 Rating (SFI Tags Affixed)
  • NOT D.O.T. / FMVSS Certified for On Highway Use
  • Wrap Around or Bolt-in Mounting
  • Drop-Forged Steel Hardware (no bolts)
  • Available in Black, Red, Blue
  • Can Be Re-webbed (SFI) Upon Expiration
Racequip
Part #: RQ6PTCON
Price: $19.95 (USD) 
Direct Ship
RaceQuip FIA Approved Euro Style Camlock Harness Set

RaceQuip FIA Camlock Harness Sets feature an ultra-lightweight magnesium alloy cam buckle with an activation lever that points downward. The FIA cam buckle utilizes a wide engagement cone for easy snap-in. A 45˚(right or left) unlatch movement prevents accidental opening and precise spring pressure provides a positive feel. All RaceQuip FIA Approved belts are constructed using premium 3” Polyester webbing that is transverse mono filament woven to provide increased strength and smoother edges. Premium aluminum shoulder adjusters come standard on all RaceQuip FIA approved harness sets.

The RaceQuip Euro Style Series Camlock belt set offers many professional features yet affordable pricing for the grassroots racer. This Camlock belt set comes in a six (6) point configuration with a pull-down  lap belt design. This harness set passes the stringent FIA 8853/98 standard. 

They start with a super-lightweight 165 gram magnesium alloy cam buckle. The buckle features an engagement cone which allows the belts to snap into the cam mechanism at angles of 21˚ left or right and 11˚ up and down for ease of engagement. Precise internal spring pressure allows a positive feel on the 45˚ (right or left) unlatch movement that reduces the chance of accidental opening.

Next, the forged SAE 4130 steel buckle hardware is sewn onto the premium 3” polyester webbing, called “transverse mono filament woven”, which means that there are mono filament fibers inter-woven into the straps in a pattern that transverses the standard weave. This design accomplishes two tasks - added strength and smoother edges on the belts. The harness sets also feature premium, lightweight, non-slip aluminum shoulder adjusters with easy lift grips. The lap belt adjusters utilize an anti-slip tensioner device as well. Heavy-duty forged steel SAE 1050 3" slide bars and 3" bolt on ends come already installed, but they can be easily removed if you prefer to mount your belts by wrapping them around a rollbar or you can change them out to snap-hook ends. Belt adjustment lengths are 20” to 68” for shoulders and 20” to 68” for the lap belt.

Features and Specifications:

  • Lightweight 165 gram Magnesium Alloy Cam Buckle
  • Formula Car Style Dual Crotch Strap
  • FIA 8853/98 Tags Only – No SFI Certification
  • NOT D.O.T. / FMVSS Certified for On Highway Use
  • 2” Wide Lap Belt Has Pull Down Adjusters
  • 2" Shoulder Belt Accommodates HNR / HANS Device
  • Crotch Strap is Captured When Shoulder Belts Snap Into Buckle
  • Shoulder and Lap Belt Utilize Aluminum Adjusters
  • Wide Engagement Cone For Easy Snap In
  • Precise Spring Pressure for a Positive Feel
  • 45° (right or left) Unlatch Movement Mitigates Accidental Opening
  • Shoulders and Crotch Straps can be installed as Wrap Around, Bolt-in, or Snap Hook Mounting (no bolts or eyebolts included)
  • The Lap Belt Bolt On Ends are sewn on
  • Cam Buckle is Affixed to Right Lap Belt
  • Premium 2” Polyester Webbing
  • Transverse Mono Filament Woven for Increased Strength and Smoother Edges
  • Shoulder Belt Adjustment Length is 20" to 60"
  • Lap Belt is Adjustable from 25" to 50"
  • Available in Black Only
Racequip
Part #: 755005
Price: $269.95 (USD) 
Direct Ship
Quantity:   
RaceQuip Sportsman 5-Point and 6-Point Camlock Racing Harnesses - SFI 16.1 Approved

Racing harnesses are required at any respectable track or strip, but they tend to run upwards of hundreds of dollars. RaceQuip designs and builds safety equipment for just this issue! Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

RaceQuip Sportsman Camlock Harness Sets feature a durable aluminum cam buckle with an activation lever that points downward. The Sportsman cam utilizes a 45˚(right or left) unlatch movement to prevent accidental opening and the precise spring pressure provides a positive feel.

All harness systems are constructed using drop-forged steel hardware for ultimate strength and reduced weight. All hardware is cadmium plated for added protection. They use only 3" (2" for HNR) premium polyester webbing for strength. Belts and hardware are routinely tested to verify compliance with SFI 16.1 standards.

Features and Specifications:

  • Lightweight Aluminum Alloy Cam Buckle
  • Exceeds SFI 16.1 Rating (SFI Tags Affixed)
  • NOT D.O.T. / FMVSS Certified for on Highway Use
  • 5 Point Design - Single 2" Crotch Strap
  • 6 Point Design - Dual 2" Crotch Strap
  • Pull Down or Up Lap Belt Adjusters Available
  • Wide Engagement Cone For Easy Snap In
  • Precise Spring Pressure for a Positive Feel
  • 45° (right or left) Unlatch Movement Mitigates Accidental Opening
  • Cam Buckle Stays Affixed to Right Side Lap Belt
  • Heavy-Duty Drop-Forged 3" Steel Hardware Ends Installed (no bolts)
  • Wrap Around or Bolt-in Mounting
  • Premium 3” Polyester Webbing
  • Transverse Mono Filament Woven for Increased Strength and Smoother Edges
  • Shoulder Belt Adjustment Length is 25" to 72"
  • Lap Belt is Adjustable from 30" to 70"
  • Can Be Re-Webbed (SFI Cert.) Upon Expiration
  • Available in Black, Red, and Blue
Racequip
Part #: RQSPCAMLOCK
Price: $139.95 (USD) 
Direct Ship
RaceQuip 4

RaceQuip recommends using their superior hardware and mounting options for alternative mounting methods to ensure that the hardware will hold up to the demands in an accident. All of there hardware and brackets are constructed from drop-forged steel and are cadmium plated for strength and corrosion resistance.

This plate reinforces the mounting point of and eyelet bolt attached to the vehicle at the body or floor of the vehicle.

Racequip
Part #: 700070
Price: $3.95 (USD) 
Direct Ship
Quantity:   
RaceQuip 7/16-20 Long Eyebolt, Nut & Washer Harness Mount Hardware

RaceQuip recommends using their superior hardware and mounting options for alternative mounting methods to ensure that the hardware will hold up to the demands in an accident. All of there hardware and brackets are constructed from drop-forged steel and are cadmium plated for strength and corrosion resistance.

This eyelet bolt attaches the harness bracket to the vehicle by being secured to the body or floor of the vehicle.

Racequip
Part #: 700060
Price: $7.95 (USD) 
Direct Ship
Quantity:   
RaceQuip 5 Point Latch And Link 3

Racing harnesses are required at any respectable track or strip, but they tend to run upwards of hundreds of dollars. RaceQuip designs and builds safety equipment for just this issue! Since 1975, RaceQuip has been building some of the highest quality racing safety gear on the market. Their high quality and low cost safety gear is the result of wanting to provide "The Best Value in Safety", that keeps drivers safe without draining their wallet.

This Standard 5 Point Latch and Link Racing harness is RaceQuips most popular racing harness, priced at $74.99 or below while still being fully SFI 16.1 Approved.

All harness systems are constructed using drop-forged steel hardware for ultimate strength and reduced weight. All hardware is cadmium plated for added protection. They use only 3" premium polyester webbing and all belts are box-x pattern sewn to ensure uniform stitch length and strength. Belts and hardware are routinely tested to verify compliance with SFI 16.1 standards.

All of their  harness sets feature a latch & link system to retain the belts. The latch & link system is distinguished by a pivoting "hammer," called a Duckbill, which locks all of the belts into place by snapping down into a detent. Both shoulder belts and the sub belt are hooked over the link; the link is inserted into the latch; the Duckbill is then brought down into and over the link, securely holding all of the pieces in place.

RaceQuip Latch & Link Harness Systems come as a "pull down" design. This means that the lap belts must be pulled down and away from the center latch mechanism to tighten.  Since their belts are "double adjustable", lengths are easily adjusted on either end for ease of installation. Using the included three bar slide you can mount the belts by either wrapping them around a rollbar or by bolting them in place. Snap-in ends and eyebolts are sold separately if you want to install your belts in that manner.

Features and Specifications:

  • Exceeds SFI 16.1 Rating (SFI Tags Affixed)
  • NOT D.O.T. / FMVSS Certified for On Highway Use
  • Premium 3" Polyester Webbing
  • Twin Individual Shoulder Belts
  • Pull Down Style Lap Belt
  • 5 Point Design - Single 2" Crotch Sub Strap
  • 3" Hardware Ends Installed 
  • Double Adjustable for Ease of Installation
  • Wrap Around or Bolt-in Mounting
  • Drop-Forged Steel Hardware (no bolts)
  • Shoulders Adjust from 20" to 62"
  • Lap Belt Adjusts 20" to 60"
  • Available in Black, Red, Blue, Yellow, Orange, Purple, Platinum, Green and Pink
  • Can Be Re-webbed (SFI) Upon Expiration
Racequip
Part #: 7110XX5PT
Price: $69.95 (USD) 
Direct Ship
Brey-Krause Clip in Harness mount - Passenger  This Mount is bolts to the OE lap belt mount on the passenger side to provide a clip in point for clip in style harness's. 
Brey-Krause
Part #: R-9288
Price: $79.95 (USD) 
Ships in 6 days
Quantity:   
RaceQuip 2

RaceQuip recommends using their superior hardware and mounting options for alternative mounting methods to ensure that the hardware will hold up to the demands in an accident. All of there hardware and brackets are constructed from drop-forged steel and are cadmium plated for strength and corrosion resistance.

This bracket attaches the harness to the vehicle via an eyelet mounting bolt.

Racequip
Part #: 700030
Price: $5.95 (USD) 
Direct Ship
Quantity:   
Racequip 3

RaceQuip recommends using their superior hardware and mounting options for alternative mounting methods to ensure that the hardware will hold up to the demands in an accident. All of there hardware and brackets are constructed from drop-forged steel and are cadmium plated for strength and corrosion resistance.

This 3-Bar Slide Mount connects and secures the harness to the harness bracket or rollbar.

Racequip
Part #: 700075
Price: $5.95 (USD) 
Direct Ship
Quantity:   
Sabelt
Part #: Z280985
Price: $40.00 (USD) 
Direct Ship
Quantity:   
Brey-Krause Clip in Harness mount- Driver This Mount is bolts to the OE lap belt mount on the driver side to provide a clip in point for clip in style harness's. 
Brey-Krause
Part #: R-9289
Price: $79.95 (USD) 
Ships in 6 days
Quantity:   
RaceQuip 7/16-20 Short Eyebolt Harness Mount Hardware

RaceQuip recommends using their superior hardware and mounting options for alternative mounting methods to ensure that the hardware will hold up to the demands in an accident. All of there hardware and brackets are constructed from drop-forged steel and are cadmium plated for strength and corrosion resistance.

This eyelet bolt attaches the harness bracket to the vehicle via the stock seat belt mounting location.

Racequip
Part #: 700050
Price: $4.95 (USD) 
Direct Ship
Quantity:   
RaceQuip 2

RaceQuip recommends using their superior hardware and mounting options for alternative mounting methods to ensure that the hardware will hold up to the demands in an accident. All of there hardware and brackets are constructed from drop-forged steel and are cadmium plated for strength and corrosion resistance.

This bracket attaches the harness to the vehicle via a mounting bolt.

Racequip
Part #: 700005
Price: $4.95 (USD) 
Ships in 6 days
Quantity:   
Get notified about money saving
specials & deals for your BMW
enter your email address
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook



    • 1-800-280-6966
      Mon-Thur 9am-6pm ET, Fri 9am-5pm ET

      • © TurnerMotorsport.com 1993-2018. All Rights Reserved.