click to Chat Live
Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart
Home
Categories
Specials Gifts & Clothing
  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages
Brakes
  1. Brake Overhaul Packages
  2. Brake Pads
  3. Brake Pad Sensors
  4. Brake Rotors
  5. StopTech Big Brake Kits
  6. Brembo Big Brake Kits
  7. Brake Fluid
  8. Brake Calipers
  9. Caliper Rebuild Kits
  10. Parking Brake Parts
  11. Brake Master Cylinders
  12. Brake Cooling Ducts & Backing Plates
  13. Brake Pads - Brembo GT BBK Calipers
  14. Brake Pads - StopTech BBK Calipers
  15. Hydraulic Hand Brakes
Car Care & Accessories
  1. Car Covers
  2. Wheel & Tire Cleaning
  3. Wax, Polish and Cleaning Supplies
  4. Detailing Gear
  5. Leather & Plastic Care
  6. Car Cleaning Supplies
  7. Chassis Paint, Coatings, Sealants, and Rust Conversion
Drivetrain
  1. Differential and Gearing Upgrades
  2. OEM Clutch Kits & Clutch Parts
  3. Performance Clutch Kits & Parts
  4. Stock OEM Dual Mass Flywheels
  5. Stainless Steel Clutch Lines
  6. Clutch Parts
  7. Axle Shafts
  8. Driveshafts
  9. Performance Short Shift Kits
  10. Drivershaft Center Support Bearings
  11. Flex Discs & Guibos
  12. Shifter Bushings
  13. Transmission Mounts
  14. Transmission Parts
Engine Chips
  1. Performance Flash Software, 2005+ Models
  2. Sprint Booster Drive-by-Wire Module
Engine Parts
  1. Engine Performance Packages
  2. Cam Sprockets & Gears
  3. Water Pumps
  4. Thermostats
  5. Radiators & Cooling System Overhaul Kits
  6. Radiator Hoses, Cooling Hoses, & Hose Sets
  7. External Engine Parts
  8. Drive Belts & V-Belts
  9. Gaskets, Gasket Sets, Seals, & O-Rings
  10. Factory-Spec Replacement Turbos and Kits
  11. Crankcase Vent, PCV, and Oil Separator Systems
  12. Turbo Upgrades and Kits
  13. Motor Mounts
  14. Electrical Sensors, Switches, & Relays
  15. Ignition Parts
  16. Alternator & Alternator Parts
  17. Starter Motors & Starter Parts
  18. Fuel System Parts
  19. Internal Engine Parts
  20. Cylinder Head Parts & Head Bolts
  21. VANOS Units & Parts
Exhaust
  1. Supersprint Performance Exhaust Systems
  2. Performance Headers & Downpipes
  3. Turner Motorsport Performance Exhaust
  4. Akrapovic Performance Exhaust Systems
  5. Borla Performance Exhaust Systems
  6. Corsa Performance Exhaust Systems
  7. Dinan Free Flow Exhaust Systems
  8. Performance Exhaust Systems
  9. Exhaust System Upgrades
  10. Oxygen Sensor - O2 Sensors
  11. Exhaust Gaskets Hangers and Parts
Exterior / Body
  1. Black Grills
  2. Chrome Grills & Trim
  3. Emblems & Decals for Hood, Trunk, and Wheels
  4. Painted Reflectors
  5. Front Spoilers, Bumper Covers, & Air Dams
  6. Rear Spoilers, Rear Wings, & Aprons
  7. Body Trim Parts & Accessories
  8. Carbon Fiber Trunk Lids
  9. Hood & Trunk Shocks, Struts
  10. License Plate Brackets & License Plate Frames
  11. Mirror Kits & Mirror Parts
  12. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  13. Hood Pins and AeroCatch Latches
  14. Racing Tow Hooks and Tow Straps
  15. Aero & Body Kits
Intake
  1. aFe Cold-Air Intake Kits
  2. Turbos & Active Autowerke Superchargers
  3. Dinan Cold Air Intake Kits
  4. Gruppe M Cold-Air Intake Kits
  5. Performance Intake Kits
  6. aFe Performance Air Filters
  7. K&N Performance Air Filters
  8. Intake Cleaning & Recharging Kits
  9. Intake Manifold Components (DISA, Vacuum, CCV, Etc)
  10. BOV, Chargepipe, and Intercooler Upgrade Kits
  11. Mass Air Sensor & Air Flow Meters
  12. Intake Boots & Hoses
  13. Other Intake Kits
Interior
  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. Factory Steering Wheels
  7. Racing Steering Wheels
  8. Shift Knobs, Shift Boots, & Shift Handles
  9. Seats & Seat Accessories
  10. Seat Belts and Racing Harnesses
  11. Cup Holders and Storage
  12. Carbon Fiber Interior Parts
  13. Door Sill Strips
  14. Heating & Air Conditioning
  15. Interior Switches and Switchgear
  16. Sunshades & Windscreens
  17. Interior Trim & Accessories
Lighting
  1. Euro Clear Turn Signals, Parking Lights, & Tail Lights
  2. Turn Signals / Parking Lights
  3. Bulbs for Headlights, Turn Signals and Tail Lights
  4. Headlights, Headlight Lenses, & Headlight Parts
  5. Stealth Bulbs
  6. Universal
Maintenance
  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Fuel Filters
  5. Cabin Air Filters, Heppa Filters, & Microfilters
  6. Transmission Filter Kits & Transmission Service Parts
  7. Ignition Coils
  8. Spark Plugs
  9. Service Reset Tools & Fault Code Readers
  10. Anti-Freeze and Coolant
  11. Engine Oils - Genuine BMW and OEM
  12. Power Steering and Hydraulic Fluids
  13. Transmission and Gear Oil - Genuine BMW and OEM
  14. MOTUL Engine Oil and Gear Lubricants
  15. Red Line Oil & Fluids
  16. Liqui-Moly Oil and Additives
Suspension
  1. Shocks & Struts
  2. H&R Performance Springs
  3. Dinan Performance Springs
  4. Spring & Shock Packages
  5. Fortune Auto Coilover Kits
  6. Dinan Coilover Spring Kits
  7. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  8. H&R Coil Over Suspensions
  9. KW Coil Over Suspensions
  10. Sway Bar Kits
  11. Sway Bar Links & Sway Bar Parts
  12. Camber / Caster Kits
  13. Strut Braces & Stress Bars
  14. Control Arm Replacements & Upgrades
  15. Suspension Bushings & Mounts
  16. Wheel Bearings & Hub Assemblies
  17. Tie Rods & Steering Parts
  18. Coil Over Spring Hardware
  19. CATuned Coilover Kits
  20. ISC Suspension Coilover Kits
Wheels
  1. Apex Flow Formed Alloy Wheels
  2. Forgeline Custom Forged Alloy Wheels
  3. HRE FlowForm Performance Alloy Wheels
  4. Vorsteiner Wheels
  5. Rohana Wheels
  6. Dinan Performance Wheels
  7. Alpina Alloy Wheels
  8. Original BMW Wheels and Wheel Upgrades
  9. Turner Motorsport Wheel Spacers
  10. ECS Tuning Wheel Spacers
  11. H&R Wheel Spacers
  12. Wheel Bolts, Wheel Studs and Nuts
  13. Wheel Emblems, Caps, and Accessories
  14. High Performance Wheels
Tools
  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Coil Over Wrenches
  5. Cooling System Tools
  6. Cylinder Head and VANOS Tools
  7. Exhaust Tools
  8. Fan and Fan Clutch Tools
  9. Fault Code Readers and OBD Scan Tools
  10. Fuel System Tools
  11. Genuine BMW Tool Kits
  12. Oil Service Tools
  13. Sockets
  14. Spark Plug Sockets
  15. Transmission and Differential Tools
  16. Wheel Pin Tools
  17. Workshop Chemicals
  18. Race Ramps
Clearance
Choose BMW
BMW 1 Series
  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+
BMW 2 Series
  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+
  3. (F87) M2 2016+
BMW 3 Series
  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+
  18. (F34) 3-Series Gran Turismo 2014+
BMW 4 Series
  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2015+
  3. (F34) 4-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+
  6. (F36) 4-Series Gran Coupe 2015+
BMW 5 Series
  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+
  10. (G30) 5-Series 2017+
BMW 6 Series
  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Coupe 2011+
  6. (F13) 6-Series Convertible 2011+
BMW 7 Series
  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+
BMW 8 Series BMW Classics (E9, Bavaria, Isetta, etc)
  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978
BMW X Series (SAV)
  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+
  12. (F48) X1 2016+
  13. (F48) X1 (2016+)
BMW Z Series
  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003
BMW 1600-2002 / tii BMW i Series
  1. (I01) BMW i3 2014+
  2. (I12) BMW i8 2014+
MINI Cooper and Cooper S
Racing
Racing Home Racing News Racing Schedule Racing Photo Gallery
Gallery
Photo Gallery Wallpaper Project Cars
  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone
Video Gallery
Projects
Turner BMW i8 Turner BMW F80 M3 Turner BMW F82 M4 Turner BMW X5 M Turner BMW F22 2 Series Turner BMW F13 M6 Turner BMW F10 M5 Turner BMW F30 335i Turner BMW E9X M3 Turner BMW E92 335i Turner BMW E82 1 Series Turner BMW ActiveE (100% Electric) Turner BMW E46 M3 Turner BMW E46 330i ZHP Turner BMW E36 M3 Turner BMW E30 M3 Turner MINI Cooper S McLaren F1 Turner BMW E92 M3 Lime Rock Turner BMW F80 M3 Silverstone
About Us
About Turner Motorsport Customer Feedback The Turner Team
  1. Open Positions
Returns Policy Shipping Info Contact Us Privacy Policy Security Policy FAQs

BMW F10-Parts Specials, Deals & Discounts

You're currently viewing parts for your (F10) 5-Series 2011+. Reset your chassis
For accurate results, specify your model below.
Schwaben 1/4 A convenient ratchet with 1/4" & 3/8" drive options. The perfect ratchet when you're on the go, reducing the amount of tools you need to carry in case of a road side repair.
Schwaben
Part #: P34472-32
Price: $9.71 (USD) 
$12.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Locking Service Cart

An important factor when it comes to automotive work other than having the right tool for the job is how to keep those tools organized. The locking Service cart really comes in handy when you need to keep the tools you're using in place, but don't want to leave them out for theft.

 

Features:

  • Thru tray frame construction for stable support
  • 3" deep locking drawer with full extension roller bearing drawer slides
  • Chrome plated 16 gauge box frame and handles
  • 350 lbs load capacity supports heavy tools and equipment
  • Large, easy to maneuver 4" ball bearing swivel casters (2 are locking)
  • Beautiful & durable high gloss black powder coated finish
  • Height  - 35.3"
  • Length  - 30"
  • Depth - 16"
  • Weight  - 64.45lbs
Schwaben
Part #: 006692SCH01A
Price: $134.96 (USD) 
$179.95 (Sale - Save 25%)
In Stock
Quantity:   
Turner Motorsport Brake Bleeder Bottle The Turner Motorsport Brake Bleeder Bottle is the perfect companion when bleeding your brakes! The bottle features a nice long flexible hose so fitment over the bleeder nipple is a snap. These bottles also offer either a magnetic mount or a cable lanyard, so you can hang the bottle or stick it to the brake rotor, this leaves your hands-free to work with your tools. It works great with our Power Brake Bleeder
Turner Motorsport
Part #: TMS1196
Price: $8.00 (USD) 
$16.49 (Sale - Save 51%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Tool - 32mm / 36mm Fan Clutch and Oil Filter Cap Open-End Wrench Why buy two tools when you can get one that will do many jobs like this open end wrench? It is great for removing and installing the fan clutch and plastic oil filter cap. Also works great for removing and installing the VAN0S solenoid on M50 engine family. Use the same tools the Turner Motorsport techs use!
Turner Motorsport
Part #: TMI9910334
Price: $44.39 (USD) 
$64.95 (Sale - Save 32%)
$64.95
Limited Qty Sale
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Genuine BMW Coffee Mug & $100 Turner Motorsport Gift Certificate Special Gift Package! This BMW holiday gift package includes a $100 Turner Motorsport gift certificate (the perfect gift for any BMW enthusiast) and a Genuine BMW ceramic coffee mug. That's essentially a free authentic BMW coffee mug to give for that BMW lover on your shopping list.
Packaged by Turner
Part #: BMW-MUG-100TMS
Price: $100.00 (USD) 
$116.95 (Sale - Save 14%)
Ships in 5 days
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben European Car Electrical Terminal Tool Kit - 12 Pieces

This tool comes in handy especially when working with an engine harness. Certain areas are always prone to corrosion and this tool makes having to re-pin a connector a breeze.

Unlike small screwdrivers, picks, and paper clips, these tools are the correct size and shape to remove and install tiny electrical pins and terminals at plastic block connectors with ease, and will not damage the connectors in the process.

Packaged in a blow molded case to keep everything secure and organized.

Schwaben
Part #: ce-70-2
Price: $80.00 (USD) 
$89.95 (Sale - Save 11%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Professional Quality Deluxe Two Shelf Service Cart

Having convenient carts make organizing a breeze and passing that on to getting the job done well.

Features:

  • Beautiful & durable high gloss black powder coated finish
  • 350lbs load capacity supports heavy tools, parts and equipment
  • Dual handles allow Push-Pull from either side for better maneuverability
  • Rugged thru tray frame construction for stable support
  • 3" Deep trays 
  • Large, easy to maneuver 4" ball bearing casters (2 are locking)

 

Dimensions:

  • Height - 35.3"
  • Length - 30"
  • Width - 16"
  • Weight - 37.5lbs
Schwaben
Part #: 005947SCH01A
Price: $89.95 (USD) 
$117.95 (Sale - Save 24%)
In Stock
Quantity:   
Recaro Sport Seat The Recaro Sport seat is the closest to an OEM-type of tuning seat you will find on the market. The Sport features comfort and luxorious materials combined with the same form fitting and embracing seat design as the Recaro motorsport seats. This is the seat that focuses most on comfort with an innovative spine support system, generous seat padding, and a wide range of fabric options. The lumbar pad on the front of the seat is fore-aft adjustable which is a great convenience for taller drivers. And the hip and side bolsters are tall to snugly hold you in place. It's a tuning seat, compatible with the standard 3-point belt, as well as pass-throughs for a 4-point harness.

Seat Specs:
shell materialsteel
fabric materialstandard: cloth, vinyl; optional materials: leather, suede, saturn, velour
fabric colorsstandard: black, grey; custom colors available
logo colorsilver
harness guidesYes, for 3 or 4 point
seat adjustmentsbackrest angle, lumbar, fore-aft (with optional sliders)
seat mountbottom mount
slidersnot included
chassis mountsnot included
Fitment notes:
  • This is a bottom-mount seat and seat adapters are not included. A vehicle-specific floor adapter plate is required. The seat will attach to either a set of sliders or be fixed in place directly to the floor plate (non adjustable).
  • This seat is designed mainly for street use. However, depending on the car model, various modifications and fabrication may be required to retain any of the original seat features. This is more of an issue on newer cars with integraged occupancy sensors, power and heat, seat memory settings, air bags, etc. Professional installation, or detailed knowledge, on newer cars is strongly recommended. We also recommend custom installation to gain the ideal seating position for your tastes.
  • Recaro
    Part #: RECARO-SPORT
    Price: $1304.63 (USD) 
    $1329 (Sale - Save 2%)
    Direct Ship
    Turner Motorsport Custom Tough Case iPhone 4 / 4S The best iPhone case just got a bit better! We've taken the Tough Case iPhone cover and customized it with a photo of the Turner Motorsport #96 E92 M3, running hard at Barber Motorsports Park.

    The Tough iPhone 4 / 4S case uses dual layers of resilient material for a rugged case that protects the object of your affection with a defensive style. The base layer is a form-fitting silicone skin that completely surrounds the iPhone 4 / 4S, adding a layer of cushion that absorbs shocks and impacts.The outer layer is an impact resistant, polycarbonate hard shell fits that fits directly on top of the silicone skin for extra iPhone protection.A solid finish makes the iPhone 4 / 4S case easy-to-hold, while the streamlined design keeps the silhouette slim enough to fit in your pocket.

    Dimensions: 4.62 x 2.39 x 0.45 in (117.2 x 60.6 x 11.3 mm)
    Turner Motorsport
    Part #: 96-IPHONE
    Price: $17.50 (USD) 
    $24.95 (Sale - Save 30%)
    $24.95
    Limited Qty Sale
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Turner Motorsport Blipshift Z4 Racecar T-Shirt - Black Your 328i may not yet be a full blown GT racecar, but adding that short shift kit gets you one step closer. Monday morning's 5 minute long red light is a chance to daydream of the 180mph high banks of Daytona! Every mod is a life enhancement with daily rewards.

    Introducing the winner of the Racing Bimmers Tee Design Contest by Blipshift honoring Turner Motorsport's continued success with BMW racecars! From e30s to last season's monster Z4, Turner has stayed true to BMWs since 1993, amassing 7 championships.

    Congrats to Anthony, winner of the Pit Crew Experience with the Turner team this season at Mazda Raceway Laguna Seca!

    Only available at TurnerMotorsport.com. Choose from Fitted T-shirt or Beefy T
    Turner Motorsport
    Part #: BS-Z4-FITTED
    Price: $12.00 (USD) 
    $19.95 (Sale - Save 40%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Side Mounts - Macht Schnell for Recaro Seats Racing and aftermarket seats require a mount to attach the seat to sliders or an adapter plate for the car. Most Recaro race seats are 'side-mount' which means the brackets attach to the side of the seat and then turn 90 degrees to mount to the floor (or sliders). These are made by Macht Schnell and made from steel for great strength and low cost. Sold as a pair to fit one seat. Fits the Recaro Pole Position, Profi, Profi XL, and Pro Racer seats.
    Recaro
    Part #: 79.20.110B
    Price: $103.05 (USD) 
    $125 (Sale - Save 18%)
    In Stock
    Schwaben 12 Ft 6 Gauge Booster Cables Looking for a high quality set of jumper cable to keep around for emergencies? These are it, don't settle for cheap budget sets found at most places.
    Schwaben
    Part #: 007269SCH01
    Price: $20.21 (USD) 
    $26.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    F10 535i F12/13 640i Supersprint Turbo Cat-Less Downpipes

    The stock down pipes cause a major restriction in the exhaust flow. BMW's solution to deal with the limited space in the engine compartment is to crush the turbo outlet tubes to reduce the size of the tubing. Doing this created undesirable backpressure. For emission purposes the factory also incorporated built-in pre-cats directly after the turbo outlet ports. This make the exhaust gas backpressure rise to extremely high levels at all rpm and engine loads. This design retains excessive heat in the engine and affects performance in a negative way. The design of the Supersprint down pipes takes advantage of even the smallest space available and frees the exhaust gas flow dramatically. The SS pipe cross section (no crushed pipe) remains constant all along the down pipes and the pre-cats are totally eliminated.

    Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

    material:T304 stainless steel

    This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.

    Supersprint
    Part #: 986311KT
    Price: $615.60 (USD) 
    $820.80 (Sale - Save 25%)
    In Stock
    Quantity:   
    Schwaben Metric Bubble Flaring Tool Set

    When replacing old corroded brake lines this is a must have tool to get the job done right. Create a bubble flare to match the connection style is an important part of creating the proper seal. Don't forget your tube cutter.

     

    Features:

    • Creates the ISO bubble flare found on European, Japanese and some domestic model brake lines.
    • Includes hardened steel bar and adapters for 4.75mm,6mm,8mm and 10mm tubing.
    • Durable blow molded case for easy transport and organization

     

     

    Schwaben
    Part #: 006394SCH01A
    Price: $49.96 (USD) 
    $79.95 (Sale - Save 38%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    OEM Style Hose Clamps Hose clamps for radiator hoses, coolant hoses, vacuum hoses, or intake hoses. These hose clamps are the same style as your OEM hoses with a smooth inside band to prevent cutting into the hose material.

    Features:
  • 9mm band width
  • 6mm hex & slotted head
  • Smooth inside of band = optimal hose protection
  • OEM
  • 430 Stainless steel band and housing with zinc plated steel screw
  • Asymmetric housing = even distribution of forces and prevents tilting of the clamp when tightening
  • Screw support = ease of assembly due to the safe guidance of the emerging band
  • Short housing saddle = even contact pressure = improved efficiency

    Part NumberDescriptionClamping Range in MMClamping Range in Inches
    008-12T8-12 HOSE CLAMP8mm-12mm5/16"-1/2"
    008-16T8-16 HOSE CLAMP8mm-16mm5/16"-5/8"
    012-20T12-20 HOSE CLAMP12mm-20mm1/2"-3/4"
    016-27T16-27 HOSE CLAMP16mm-27mm5/8"-11/16"
    020-32T20-32 HOSE CLAMP20mm-32mm3/4"-1 1/4"
    025-40T25-40 HOSE CLAMP25mm-40mm1"-1 5/8"
    030-45T30-45 HOSE CLAMP30mm-45mm1 3/16"-1 3/4"
    032-50T32-50 HOSE CLAMP32mm-50mm1 3/8"-2"
    040-60T40-60 HOSE CLAMP40mm-60mm1 5/8"-2 3/8"
    050-70T50-70 HOSE CLAMP50mm-70mm2"-2 3/4"
    060-80T60-80 HOSE CLAMP60mm-80mm2 3/8"-3 1/8"
    070-90T70-90 HOSE CLAMP70mm-90mm2 3/4"-3 1/2"
    080-100T80-100 HOSE CLAMP80mm-100mm3 1/8"-4"
    090-110T90-110 HOSE CLAMP90mm-110mm3 1/2"-4 3/8"
    110-130T110-130 HOSE CLAMP110mm-130mm4 3/8"-5 1/8"
  • Turner Motorsport
    Part #: Hose-Clamps
    Price: $0.57 (USD) 
    $2.19 (Sale - Save 74%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Turner Motorsport Double Win T-shirt 2013 These 100% cotton t shirts feature the #94 and #96 Turner Motorsport BMW M3s as raced in the Grand Am Series on the back with the Turner Motorsport Logo on the front. Available in sizes Small-XXL.
    Turner Motorsport
    Part #: TMS338546
    Price: $14.99 (USD) 
    $ (Sale - Save 0%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Turner Motorsport Z4 Racecar 2014 GTD Champions T-Shirt - Black Celebrate our 2014 GTD Championship with the Z4 GTD race car. The Turner Motorsport BMW Z4 GTD won 4 races, and had 6 podiums and 10 top-ten finishes in the TUDOR United SportsCar Championship. This high quality 100% cotton black t-shirt features the Turner Z4 GTD on the back and Turner logo on the front.

    Get yours today, these are limited in quantity and won't last long. Choose size below.
    Turner Motorsport
    Part #: G200-WIN
    Price: $9.95 (USD) 
    $24.95 (Sale - Save 60%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    StopTech Front Big Brake Kit - F10 535i 550i

    Position: Front
    Caliper: 6-piston ST60
    Colors: black, red, silver, blue, yellow, custom (call)
    Rotors: 380x32, cross-drilled or slotted
    Also Included: stainless steel brake lines, StopTech Street Performance pads, hardware

    StopTech Brakes puts championship-winning race technology and state-of-the-art engineering under your feet. StopTech's Front Big Brake Kit for the BMW F10 535I and F10 550I is engineered to work with the stock brake hydraulics and ABS/DSC system. StopTech builds each kit to achieve the correct brake balance. This brake upgrade gives better stopping performance in everyday driving, aggressive street driving, or all-out track days. By increasing the rotor size, using a larger pad, and a fixed forged aluminum caliper, you can improve your braking performance substantially for any condition! StopTech Brakes have been used on Turner Motorsport racecars since 2003, winning 5 sports car championships and recording numerous race wins since.

    Safety Improvements from A Big Brake Kit:
    + Caliper design improves brake application and increases torque - braking is stronger meaning shorter stopping distances and faster response
    + Vehicle-specific design - improves brake feel with a firmer pedal
    + Larger and thicker rotors - less fade and longer pad and rotor life

    Advantages of a StopTech Big Brake Kit:
    + extremely strong caliper and mounting system - reduces flex and deflection, improving torque application to the disc
    + Several color options available
    + Vehicle-specific calipers that maintain correct brake proportioning and balance
    + AeroRotor patented vaning for superior air flow
    + Cross-Drilled for street use or Gas-Slotted for street or track use
    + Billet aluminum mounting hats for superior strength over steel
    + DOT-compliant stainless steel brake lines
    + Street Performance brake pads that work on both street and light track use

    Maximizing brake efficiency by braking with all four wheels� Sounds obvious right? Many bolt-on caliper upgrades and other big brake kits are not built with the specific vehicle's dynamics in mind. With too much braking force on the front, rear traction is compromised. And vice-versa. Brake traction is better when all four tires are doing the work. Most BMWs have 50-50 weight distribution so the correct braking proportioning is crucial! StopTech engineers each kit around that vehicle's dynamics by altering the size and number of pistons in the caliper to match the rotor size used in the kit. Bigger is not always better�

     

    Brake FAQs

    Brake Pad Buying Guide

    Brake Rotor Buying Guide


    Wheel Fitment Guides: Wheel spoke-to-brake caliper clearance is critical since the new caliper is physically larger and the in a different position. StopTech has produced these cutaway diagrams for you to print and place on the backside of your wheel to check for clearance. Wheels that do not clear will need a wheel spacer. The minimum recommended clearance between the wheel and caliper is 3mm.
    F10 535I /550I - front 6-piston/380mm rotor

    F10 5 Series Front StopTech Brake Kit Applications:
    2011+ F10 535i, 550i (not for xDrive models

     

    We will meet or beat any advertised price for StopTech Big Brake Kits! Call or e-mail us with the published pricing that you found and we will do our best to not only match that price but actually beat it!

     

    StopTech
    Part #: 83.B32.6D00
    Price: $2032.25 (USD) 
    $2885.8 (Sale - Save 30%)
    In Stock
    Free Shipping Free Shipping
    Side Mounts - Recaro Seats - FIA Approved Racing and aftermarket seats require a mount to afix the seat to the chassis of the car. Most Recaro seats are 'side-mount' which means the brackets attach to the side of the seat and then turn 90 degrees to mount to the floor (or sliders). These are genuine Recaro side mounts that are FIA-certified for optimum safety and security. Many racing organizations require an FIA-approved mount. Sold as a pair with hardware included. Choose from standard steel or light weigt aluminum.
    Recaro
    Part #: 7207xxxx
    Price: $103.05 (USD) 
    $125 (Sale - Save 18%)
    In Stock
    Turner Loaded Backpack Gift Package

    Pick up our rugged OGIO backpack along with some Turner goodies and pocket nearly $25 in savings! Spoil yourself this season!

    Our "Stuffed Backpack" package includes:
    + $50 Turner Gift Certificate
    + Turner OGIO Backpack
    + Turner Pint Glass
    + Turner Cap
    + Turner Keychain
    + Turner Motorsport Sticker Sheet

    Packaged by Turner
    Part #: GP153
    Price: $115.86 (USD) 
    $140.00 (Sale - Save 17%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Cool Carbon S/T PLUS Performance Brake Pad Set - Front - F10 528/535 (High Speed Brakes)

    Owned and operated by performance driving enthusiasts, Cool Carbon Performance not only has the German pedigree known for engineering rigor and excellence, but their experience with club, track and racing events has given them a special sensitivity to the unique needs of today's daily street performance drivers.

    For their latest Street Performance PLUS Brake Pad release, special consideration was given to build materials and R&D test results.

    In Cool Carbon's new dedicated brake pad facility, they've developed a new proprietary “low-Met” formula utilizing Twaron Aramid fibers, similar to Kevlar material, that rapidly dissipates heat and resists wear and was developed and subjected to a test protocol that included friction, temperature, and wear monitoring.

    The stunning results of these efforts are seen in their real world performance: greater linear and predictable initial bite that the previous S/T pads, consistent braking torque, superior resistance to heat-cycling, proven fade resistance, and crucially reduced dust levels.

    BMW owners will also notice a welcomed measure of practicality and drivability with Cool Carbon products. The “grabby” tendency often felt with OEM BMW brakes is eliminated; the CC brake compound allows for a much more controllable and linear application of brake pressure and a much greater degree of modulation.

    Features:

    • Excellent for spirited street driving and light to moderate track use
    • Increase in stopping power while remaining street friendly
    • Very linear, smooth pedal modulation
    • Low to no noise or dust - rotor friendly!
    • Faster heat dissipation allowing consistent performance at higher temperatures, even greater than previous S/T pad's performance
    • Processed using “true positive molding”; pads molded individually to pressure for exacting performance; density and compressibility specifications are controlled for each pad, maintaining specific performance attributes.
    • Developed at an all new German R&D facilities; tested extensively on the German autobahn; fine tuned at the renowned Nurburgring race circuit
    • New brake pad curing process and triple scorching for a faster initial bedding period
    • New pad formula with Twaron Aramid in the composite for greater thermal stability and better long term durability compared to other high performance pads
    • Improved break pad shims for more efficient noise reduction

    Turner Motorsport recommends using the Cool Carbon Street Performance rear brake pads to maintain an ideal braking balance, preventing major brake bias or uneven wear characteristics.

    This item fits the following BMWs:

    2011+ F10 BMW 528i 528xi 535i 535xi with factory High Speed Brakes option

    Cool Carbon Performance
    Part #: 8706-D1505PL
    Price: $133.15 (USD) 
    $147.95 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Red Line 0W30 Synthetic Engine Oil

    All sets of 12 now 10% off regular price!

    Redline lubricants are designed for modern German gasoline and diesel engines, with high detergency allowing for extended service intervals called out in your vehicle owner's manual. Unlike many other motor oils, it include the proper anti-wear additives and a low ash content, so it's compatible with the emissions equipment of modern diesel engines. It offers great wear protection, superior efficiency, and reduced friction for today's engines. This is ideal for cold weather applications where 5W30 is recommended.

    Redline
    Part #: REDLINE31A
    Price: $10.07 (USD) 
    $12.49 (Sale - Save 19%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Wheel Bolt Pattern Gauge

    This Schwaben tool easily and quickly measures wheel bolt circle on multible lug patterns. Including 3-4-5 and 6 lug patterns. Construction is a quality all aluminum billet tool made to last a lifetime.

    • X3 = 3 lug wheel sizes on one side of pattern tool. Containes 10 different bolt patterns. 
    • X4 = 4 lug wheel sizes on one side of the pattern tool. Contains 10 different bolt patterns.
    • X5 = 5 lug wheel sizes and shows on two sides of the pattern tool. Contains 12 different  bolt patterns.
    • X6 = 6 lug wheel sizes and shows on one side of pattern tool. Contains 5 different  bolt patterns.

    NOTE: Loosen sliding arm, insert into wheel or center on studs. Tighten thumb screw gently. Measure bolt pattern on inside of arm.

    NOTE: 5 lug patterns has measurement on two different sides of the tool. if it does not line up to a mark look on opposite side for more 5 lug sizes.

     

    Schwaben
    Part #: 009619SCH01A
    Price: $18.71 (USD) 
    $24.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    Extra-Large Turner Motorsport Toolbox Sticker (5x8

    THE IDEAL TOOLBOX STICKER!

    Cast some positive Turner vibes on your track build with this extra-large vinyl TURNER MOTORSPORT sticker. About as long as an arm, this is a great statement piece anywhere around the shop. 

    While supplies last. Limit one per customer, please!

    Turner Motorsport
    Part #: 148-410
    Price: $8.95 (USD) 
    $19.95 (Sale - Save 55%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    $100 Turner Motorsport Gift Package Special Gift Package! This BMW holiday gift package includes a $100 Turner Motorsport gift certificate (the perfect gift for any BMW enthusiast) and a Genuine BMW ceramic coffee mug. That's essentially a free authentic BMW coffee mug to give for that BMW lover on your shopping list. No matter what BMW your gift recipient owns, or what they need, you know they can choose exactly what they want from our THOUSANDS of BMW products, parts and BMW accessories. Offer valid while supplies last.

    Limit 1 Gift Package per customer.
    Packaged by Turner
    Part #: GC100
    Price: $100.00 (USD) 
    $118.95 (Sale - Save 16%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    F10 M5 HRE FF01 20x9/10.5

    F10 M5 HRE FlowForm 20" Wheels
    Fr: 20x8.5" ET25 21.8lbs
    Rr: 20x10.0" ET40 22.4lbs

    HRE Wheels has emerged as the styling leader and trend starter in the European car wheel market. HRE designs are cutting edge and exciting and are featured on the hottest street machines from SoCal to South Beach. The HRE FlowForm wheel line offers forged wheel strength and HRE's stimulating designs at a more attractive price.

    HRE FF01 FlowForm wheels are a Y-spoke design instantly familiar and at-home on BMWs. The FF01 closely resembles the famous CSL or ZCP factory designs but with distinct details and more desirable sizes and offsets. FF01 wheels are available in 19" and 20" sizes that fit with the proper offset (no spacers required). Concave centers emphasize the muscular and athletic stance while two standard and eleven optional finishes trigger the visual impact.

    The FlowForm process is new technology with the attributes of a fully forged wheel but at a lower cost. FlowForm starts as a cast face and the barrel is then spin formed over a mold at intense pressure. This gives the wheel greater strength but lighter in weight and with more precise tolerances than a traditional cast wheel. HRE FF wheels are TUV, VIA, and JWL approved and come with a lifetime structural warranty and two-year finish warranty.

    HRE FlowForm Wheel Features -
    + state-of-the-art technology
    + lighter and stronger than a cast wheel
    + stimulating looks
    + multiple color and finish options encourage personalization
    + lifetime structural warranty
    + TUV, VIA, and JWL approved

    Colors and Finishes -
    Standard Colors

    Optional Colors (+$500)

    This item fits the following BMWs:
    2012+ F10 BMW M5

    HRE
    Part #: F10M5HREFF01-20
    Price: $2160.00 (USD) 
    $2700 (Sale - Save 20%)
    Direct Ship
    Turner Motorsport - Rolex Side View - Child's T-Shirt These 100% cotton tshirts feature the Turner Motorsport BMW M3 as raced in the Rolex 24 at Daytona. Available in either Toddler sizes (2T,3T, or 4T) or Youth sizes (XS, S, M, or L).
    Turner Motorsport
    Part #: TMS5556
    Price: $8.75 (USD) 
    $9.95 (Sale - Save 12%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    BMW Motorsport Seat Belt Shoulder Pad Set These original BMW Motorsport shoulder pads fit over any street car seat belt or 2" harness belt. A zippered side makes these super easy to install on any car. High quality "BMW MOTORSPORT" embroidery will set your car apart from the rest. Also available in 76mm (3") harness width. Set includes two shoulder pads.
    Genuine BMW
    Part #: MSBELT50MM
    Price: $89.95 (USD) 
    $105.62 (Sale - Save 15%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Recaro Sportster CS Sport Seat (Heated) The Sportster CS seat is everything you wanted in a street sport seat. This seat doesn't just look cool - it's also a functional ergonomic improvement. This seat goes above and beyond any standard BMW seat to grip your body and keep you planted in the seat. Your whole body is supported - aggressive side and hip bolsters combine with wide shoulder supports and integrated headrest to properly support and protect your body during extreme driving. But Recaro has also focused on comfort by contouring the backrest to the natural shape of the human spine. The padding is thick and dense and the seat cushion has a built-in shock absorbing design. It also has a heated bottom cushion for additional added comfort (only on vinyl and leather materials). This seat will accept a standard 3-point seatbelt as well as a 4-point harness. The backrest folds forward for easy access to rear seats in a coupe body. The Sportster CS is the obvious choice, even for manufacturers like BMW, for a premium and functional ultra-sport seat.

    Feedback from a Sportster CS user: "The phenomenological aspect that struck me the most, however, is just how much more a part of the car you feel when you are harnessed into these seats! I got a thrill from driving that I haven't had since I was in high school! It was that dramatic a change. The stock seats now seem like puffy cushions that float in disconnected fashion from the car and its movements. With the Recaros, you are one with the Beast. If I had known how dramatic a difference they would make, they would have been the first mod I made, without a doubt."

    Seat Specs:
    shell materialsteel base with composite backrest
    fabric materialstandard: cloth or vinyl; optional: vinyl, leather
    fabric colorsstandard: black; optional: red, silver
    logo colorgrey, silver, red, black
    harness guidesYes, for 3 or 4 point
    seat adjustmentsbackrest angle, fore-aft (with optional sliders)
    seat mountbottom mount, adapter bracket included
    slidersnot included
    chassis mountsnot included
    Fitment notes:
  • This is a bottom-mount seat with a Recaro seat adapter included. A vehicle-specific floor adapter plate is still required. This seat will attach to either a set of sliders or be fixed in place directly to the floor plate (non adjustable).
  • This seat is designed mainly for street use. However, depending on the car model, various modifications and fabrication may be required to retain any of the original seat features. This is more of an issue on newer cars with integraged occupancy sensors, power and heat, seat memory settings, air bags, etc. Professional installation, or detailed knowledge, on newer cars is strongly recommended. We also recommend custom installation to gain the ideal seating position for your tastes.
  • Recaro
    Part #: TMS212713
    Price: $4403.63 (USD) 
    $4428 (Sale - Save 1%)
    Direct Ship
    Turner Motorsport - Future Race Car Driver Child's - T-Shirt Every kid dreams of being a be race car driver. These bright yellow children's tshirts show off your/their enthusiasm for racing and support for the Turner Motorsport Grand-Am and Rolex teams. Available in either Toddler sizes (2T,3T, or 4T) or Youth sizes (XS, S, M, or L). 100% cotton.
    Turner Motorsport
    Part #: FUTURE-DRIVER
    Price: $8.75 (USD) 
    $14.95 (Sale - Save 41%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Recaro Pole Position Race Seat Famous Recaro brand quality in an entry level seat! The Recaro Pole Position is a fixed-back fiberglass shell with slots for racing harnesses. It's fully FIA approved which makes it suitable for nearly all ranges of racing series or for a track-only car. The sizing and shape of this seat is best-suited for small-medium sized drivers. This is a side-mount design and requires side mount brackets and vehicle-specific floor adapter. Sliders and additional seat cushions optional.

    Seat Specs:
    Shell Materialfiberglass-reinforced plastic
    fabric materialvelour
    fabric colorsblack, blue, red
    logo colorwhite or black depending on seat color
    harness guidesYes for 4, 5, or 6 point
    seat mountside mount, not included
    slidersnot included
    chassis mountsnot included
    Recaro
    Part #: TMS21541
    Price: $933.30 (USD) 
    $1098 (Sale - Save 15%)
    In Stock
    F10 M5 Supersprint Performance Mufflers (100mm Tips)

    Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

     

    section:rear muffler

    connects to:OEM or Supersprint section 2

    tip style:4 x 100mm round polished stainless

    Supersprint
    Part #: 988076KT
    Price: $3768.09 (USD) 
    $5024.12 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    Borla Cat-Back S-Type Sport Exhaust - F10 M5 Unleash the sound of the F10 M5's V8 with this Borla exhaust system! The V8 sounds so nice with this exhaust, you'll wonder why BMW didn't spec it like this from the beginning. If you've felt the sound is too quiet and distant this is the perfect M5 exhaust upgrade. The middle S-Spec exhaust not too loud, not too quiet. It's just right. Borla builds their exhaust with the goal of enhancing the sound - not just making it outrageously loud. In fact, Borla exhausts deliver some of the quietest and most pleasing sounds of all of the aftermarket brands we have seen. This Borla exhaust produces a deep rumble perfectly suited to the V8. It's a throaty sound that any American muscle car fan will appreciate. Yet it manages to be civilized and unobtrusive when needed. This system bolts on after the factory catalytic converters for an easy install. This system features a 3.0" pipe diameter leading into the mufflers (2.25" on exit) with 3.5" tips.

    Every Borla is made with 304 stainless steel for the internals and muffler body. Unlike other systems that can use coated aluminum, mild steel, or 409 stainless, the Borla uses true 304 stainless on the inside as well as the outside. This prevents the muffler from rusting and deteriorating from the inside out. Borla guarantees every muffler with a 1,000,000 mile warranty. Turner Motorsport has been the leading Borla dealer for BMW exhausts since we sold our first system in 1996, including using Borla Exhausts on every Turner BMW racecar.



    This item fits the following BMWs:
    2012+ F10 BMW M5
    Borla
    Part #: 140511
    Price: $2959.24 (USD) 
    $3324.99 (Sale - Save 11%)
    Direct Ship
    Free Shipping Free Shipping
    Quantity:   
    Turner Motorsport Mens Championship T-Shirt Celebrate our championship victories from the past several years including our most recent 2011 GS Championship. These t-shirts are official Turner wear, as seen worn by employees and our championship winning race team personnel. Turner Motorsport logo on the front with images of the various championship winning cars on the back.

    Also available in Long Sleeve
    Turner Motorsport
    Part #: 920-2014-x
    Price: $12.75 (USD) 
    $14.99 (Sale - Save 15%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Turner Motorsport Iron-on Patches Make any piece of clothing or fabric FASTER! Ok -- the faster part is up to you. But these patches can certainly help dress up virtually anything, like a race suit, gloves, or other favorite piece of driving clothing. Available in 2 different sizes (SMALL 1.75" x 0.5" or LARGE 4.25" x 1.25") and 2 colors (blue or white background). Select your desired size and color below. 25-cent piece (quarter) not included.

    Instructions for use:
    Preheat iron to "High/Cotton" setting. No steam! Cover with thin cloth. Iron for 25 seconds using constant pressure and a slow twisting motion. Repeat on reverse side of fabric.
    Turner Motorsport
    Part #: PATCH4502
    Price: $3.00 (USD) 
    $7.98 (Sale - Save 62%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Recaro Sport Topline Seat The Recaro Sport Topline seat is the closest to an OEM-type of tuning seat you will find on the market. The Sport features comfort and luxorious materials combined with the same form fitting and embracing seat design as the Recaro motorsport seats. This is the seat that focuses most on comfort with an innovative spine support system, generous seat padding, and a wide range of fabric options. The lumbar pad on the front of the seat is fore-aft adjustable which is a great convenience for taller drivers. And the hip and side bolsters are tall to snugly hold you in place. It's a tuning seat, compatible with the standard 3-point belt, as well as pass-throughs for a 4-point harness.

    The Sport Topline seat also features power adjustments for the height and tilt as well as climate control (seat venting and heating).

    Seat Specs:
    shell materialsteel
    fabric materialstandard: cloth; optional: leather, suede, vinyl
    fabric colorsstandard: black, grey; optional: blue, red, beige
    logo colorbeige, silver, red, black
    harness guidesYes, for 3 or 4 point
    seat adjustmentsbackrest angle, lumbar, hight (electric), tilt (electric), fore-aft (with optional sliders)
    seat mountbottom mount
    slidersnot included
    chassis mountsnot included
    Fitment notes:
  • This is a bottom-mount seat and seat adapters are not included. A vehicle-specific floor adapter plate is required. The seat will attach to either a set of sliders or be fixed in place directly to the floor plate (non adjustable).
  • This seat is designed mainly for street use. However, depending on the car model, various modifications and fabrication may be required to retain any of the original seat features. This is more of an issue on newer cars with integraged occupancy sensors, power and heat, seat memory settings, air bags, etc. Professional installation, or detailed knowledge, on newer cars is strongly recommended. We also recommend custom installation to gain the ideal seating position for your tastes.
  • Recaro
    Part #: TMS22147
    Price: $2004.63 (USD) 
    $2029 (Sale - Save 1%)
    Direct Ship
    H&R 3mm Wheel Spacers (Pair) - F30, F10 M5, F06/F13 M6, F32

    3mm = .12"
    5/120 bolt pattern; 72.5 center bore
    DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are recommended.
    Hubcentric = Yes*, the original hub lip still protrudes through the spacer 

    H&R's 3mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only. This spacer has a larger mounting surface specifically designed for the larger mounting pad of F30 wheels. 

    This spacer slips on the existing hub lip and leaves some lip left over for the wheel to rest on. This keeps the wheel hubcentric*.
    * - To avoid vibration, 3mm spacers work best with wheels that have a flush mounting surface. Wheels that have a bevel around the mounting surface will not be fully seated on the hub and a vibration may result. 

    Longer wheel bolts are strongly recommended. Choose from black or silver bolts from the options below. Wheel locks to work with this spacer size are also available. 
     

    Wheel Spacer FAQ

    How To Measure for Spacers

    Wheel Spacer Encyclopedia - everything you wanted to know


    This item fits the following BMWs:
    2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan
    2013+ F31 BMW 328i xDrive 328d xDrive - Wagon
    2013+ F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe
    2013+ F33 BMW 428i Convertible 428i xDrive Convertible 435i Convertible - Convertible
    2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe
    2011+ F10 BMW M5
    2012+ F12 BMW M6
    2013+ F06 BMW M6 Gran Coupe

    H&R
    Part #: 675726
    Price: $95.45 (USD) 
    $112.45 (Sale - Save 23%)
    Direct Ship
    Seatbelt 3-point Receptacle - Macht Schnell Adding seats and keeping your stock 3-point belt? You're going to need this set of brackets to attach the old belt receptacle to the new floor mount. Nearly all BMW seats have the inboard belt buckle attached to the seat. So you will need to remove that buckle and transfer it to your new floor bracket. If you're using the Macht Schnell floor brackets these plates mount in between the sliders and seat. They are made from thick steel then powedercoated in stealthy black. These are sold as a pair to fit one seat and the Macht Schnell floor mounts (may require modification for use on other brand floor mounts). Fits most coupe or sedan models from 1992-2012, including E36, E46, E82, E9X, and Z4 models.

    Sold per seat.

    This item fits the following BMWs:
    2008-2012 E82 BMW 128i 135i 1M Coupe
    1992-1998 E36 BMW 318i 318is 318ti 323is 325i 325is 328i 328is M3
    1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (not convertibles)
    2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
    2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
    2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
    2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
    Macht Schnell
    Part #: 79.12.12X
    Price: $112.50 (USD) 
    $125 (Sale - Save 10%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    AR Design 4

    Narrow exhaust pipes can be a major restriction to performance. If you are looking for top of the line downpipes, AR Design has you covered with their Hi-Flo Downpipes. These are perfect to add power, performance, and stunningly good looks. Made 100% in the United States of 3" 304 stainless steel tubing and expertly welded with some of the best looking welds on the market, the guys at AR Design are so confident in their material and build quality, they give you a lifetime warranty against manufacturing defects and a three year warranty against rust and corrosion.

    These performance downpipes produce more power than the stock exhaust pipes and add a sporty exotic tone to your exhaust note. These downpipes also include a Race Catalytic Converter to ensure both high flow and emissions compliance for cars driven on the street in addition to the track.

    These are available as stainless or with a ceramic coating rated up to 2000 degrees Fahrenheit. This helps keep the heat from radiating into the engine bay, keeping air intake temperatures much lower! Two coating options are available: Silver and Black.

    Included in this kit:

    • 3" Downpipes
    • Race Cats
    • "Bomb-Proof" exhaust gaskets
    • Grade 10.9 metric hardware for high durability

    Fits the following vehicles:
    F06/12/13 BMW
     6 Series with N55 Engine
    F10 BMW 5 Series with N55 Engine

    AR Design
    Part #: N554CDP
    Price: $929.07 (USD) 
    $999 (Sale - Save 7%)
    Direct Ship
    AR Design 3

    Narrow exhaust pipes can be a major restriction to performance. If you are looking for top of the line downpipes, AR Design has you covered with their Hi-Flo Downpipes. These are perfect to add power, performance, and stunningly good looks. Made 100% in the United States of 3" 304 stainless steel tubing and expertly welded with some of the best looking welds on the market, the guys at AR Design are so confident in their material and build quality, they give you a lifetime warranty against manufacturing defects and a three year warranty against rust and corrosion.

    These performance downpipes produce more power than the stock exhaust pipes and add a sporty exotic tone to your exhaust note. These downpipes also include a Race Catalytic Converter to ensure both high flow and emissions compliance for cars driven on the street in addition to the track.

    These are available as stainless or with a ceramic coating rated up to 2000 degrees Fahrenheit. This helps keep the heat from radiating into the engine bay, keeping air intake temperatures much lower! Two coating options are available: Silver and Black.

    Two types of fitments are available: 2-bolt Style and Slip Fit Style

    Included in this kit:

    • 3" Downpipes
    • Race Cats
    • "Bomb-Proof" exhaust gaskets
    • Grade 10.9 metric hardware for high durability

    Fits the following vehicles:
    F01/02 BMW
     750i/li s/xDrive with N63 V8 engine
    F07/10 BMW 550i s/xDrive with N63 V8 engine
    F12 BMW 650i s/xDrive with N63 V8 engine

    AMC
    Part #: FXXN63CDP
    Price: $1626.57 (USD) 
    $1749 (Sale - Save 7%)
    Direct Ship
    Get notified about money saving
    specials & deals for your BMW
    enter your email address
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook



    • 1-800-280-6966
      Mon-Thur 9am-6pm ET, Fri 9am-5pm ET

      • © TurnerMotorsport.com 1993-2018. All Rights Reserved.