click to Chat Live
Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart
Home
Categories
Specials Gifts & Clothing
  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages
Brakes
  1. Brake Overhaul Packages
  2. Brake Pads
  3. Brake Pad Sensors
  4. Brake Rotors
  5. Brake Fluid
  6. Brake Calipers
  7. Caliper Rebuild Kits
  8. Parking Brake Parts
  9. Brake Cooling Ducts & Backing Plates
  10. Brake Pads - Brembo GT BBK Calipers
  11. Brake Pads - StopTech BBK Calipers
  12. Hydraulic Hand Brakes
Car Care & Accessories
  1. Car Covers
  2. Wheel & Tire Cleaning
  3. Wax, Polish and Cleaning Supplies
  4. Detailing Gear
  5. Leather & Plastic Care
  6. Car Cleaning Supplies
  7. Chassis Paint, Coatings, Sealants, and Rust Conversion
Drivetrain
  1. Differential and Gearing Upgrades
  2. OEM Clutch Kits & Clutch Parts
  3. Performance Clutch Kits & Parts
  4. Stainless Steel Clutch Lines
  5. Clutch Parts
  6. Axle Shafts
  7. Performance Short Shift Kits
  8. Drivershaft Center Support Bearings
  9. Flex Discs & Guibos
  10. Shifter Bushings
  11. Transmission Parts
Engine Chips
  1. Performance Flash Software, 2005+ Models
  2. Sprint Booster Drive-by-Wire Module
  3. Burger Motorsports Tuning
Engine Parts
  1. Engine Performance Packages
  2. Water Pumps
  3. Radiators & Cooling System Overhaul Kits
  4. Radiator Hoses, Cooling Hoses, & Hose Sets
  5. External Engine Parts
  6. Drive Belts & V-Belts
  7. Gaskets, Gasket Sets, Seals, & O-Rings
  8. Factory-Spec Replacement Turbos and Kits
  9. Crankcase Vent, PCV, and Oil Separator Systems
  10. Turbo Upgrades and Kits
  11. Motor Mounts
  12. Electrical Sensors, Switches, & Relays
  13. Ignition Parts
  14. Alternator & Alternator Parts
  15. Fuel System Parts
  16. Internal Engine Parts
  17. Cylinder Head Parts & Head Bolts
  18. VANOS Units & Parts
  19. Oil Coolers & Oil Cooler Parts
Exhaust
  1. Supersprint Performance Exhaust Systems
  2. Performance Headers & Downpipes
  3. Turner Motorsport Performance Exhaust
  4. Akrapovic Performance Exhaust Systems
  5. Borla Performance Exhaust Systems
  6. Corsa Performance Exhaust Systems
  7. Dinan Free Flow Exhaust Systems
  8. Performance Exhaust Systems
  9. Exhaust System Upgrades
  10. Oxygen Sensor - O2 Sensors
  11. Exhaust Gaskets Hangers and Parts
Exterior / Body
  1. Black Grills
  2. Emblems & Decals for Hood, Trunk, and Wheels
  3. Painted Reflectors
  4. Front Spoilers, Bumper Covers, & Air Dams
  5. Rear Spoilers, Rear Wings, & Aprons
  6. Body Trim Parts & Accessories
  7. License Plate Brackets & License Plate Frames
  8. Mirror Kits & Mirror Parts
  9. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  10. Hood Pins and AeroCatch Latches
  11. Racing Tow Hooks and Tow Straps
Intake
  1. aFe Cold-Air Intake Kits
  2. Dinan Cold Air Intake Kits
  3. Gruppe M Cold-Air Intake Kits
  4. Performance Intake Kits
  5. aFe Performance Air Filters
  6. K&N Performance Air Filters
  7. Intake Cleaning & Recharging Kits
  8. Intake Manifold Components (DISA, Vacuum, CCV, Etc)
  9. BOV, Chargepipe, and Intercooler Upgrade Kits
  10. Mass Air Sensor & Air Flow Meters
  11. Intake Boots & Hoses
  12. Other Intake Kits
Interior
  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. Factory Steering Wheels
  7. Racing Steering Wheels
  8. Shift Knobs, Shift Boots, & Shift Handles
  9. Seats & Seat Accessories
  10. Seat Belts and Racing Harnesses
  11. Cup Holders and Storage
  12. Carbon Fiber Interior Parts
  13. Heating & Air Conditioning
  14. Interior Switches and Switchgear
  15. Sunshades & Windscreens
  16. Interior Trim & Accessories
  17. Fire Extinguishers and Mounts
  18. Helmets
Lighting
  1. Bulbs for Headlights, Turn Signals and Tail Lights
  2. Headlights, Headlight Lenses, & Headlight Parts
  3. Fog Lights, Fog Light Lenses, & Fog Light Parts
  4. Stealth Bulbs
  5. Universal
Maintenance
  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Cabin Air Filters, Heppa Filters, & Microfilters
  5. Transmission Filter Kits & Transmission Service Parts
  6. Ignition Coils
  7. Spark Plugs
  8. Service Reset Tools & Fault Code Readers
  9. Anti-Freeze and Coolant
  10. Engine Oils - Genuine BMW and OEM
  11. Power Steering and Hydraulic Fluids
  12. Transmission and Gear Oil - Genuine BMW and OEM
  13. MOTUL Engine Oil and Gear Lubricants
  14. Red Line Oil & Fluids
  15. Liqui-Moly Oil and Additives
Suspension
  1. Shocks & Struts
  2. H&R Performance Springs
  3. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  4. H&R Coil Over Suspensions
  5. KW Coil Over Suspensions
  6. Sway Bar Kits
  7. Sway Bar Links & Sway Bar Parts
  8. Control Arm Replacements & Upgrades
  9. Suspension Bushings & Mounts
  10. Wheel Bearings & Hub Assemblies
  11. Tie Rods & Steering Parts
  12. Coil Over Spring Hardware
  13. CATuned Coilover Kits
Wheels
  1. Apex Flow Formed Alloy Wheels
  2. Forgeline Custom Forged Alloy Wheels
  3. HRE FlowForm Performance Alloy Wheels
  4. Vorsteiner Wheels
  5. Rohana Wheels
  6. Dinan Performance Wheels
  7. Alpina Alloy Wheels
  8. Original BMW Wheels and Wheel Upgrades
  9. Turner Motorsport Wheel Spacers
  10. ECS Tuning Wheel Spacers
  11. H&R Wheel Spacers
  12. Wheel Bolts, Wheel Studs and Nuts
  13. Wheel Emblems, Caps, and Accessories
  14. High Performance Wheels
Tools
  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Coil Over Wrenches
  5. Cooling System Tools
  6. Cylinder Head and VANOS Tools
  7. Exhaust Tools
  8. Fan and Fan Clutch Tools
  9. Fault Code Readers and OBD Scan Tools
  10. Fuel System Tools
  11. Genuine BMW Tool Kits
  12. Oil Service Tools
  13. Schwaben Lighting
  14. Sockets
  15. Spark Plug Sockets
  16. Transmission and Differential Tools
  17. Wheel Pin Tools
  18. Workshop Chemicals
  19. Race Ramps
  20. Fender Rollers
  21. Vehicle Lifts
Clearance
Choose BMW
BMW 1 Series
  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+
BMW 2 Series
  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+
  3. (F87) M2 2016+
BMW 3 Series
  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+
BMW 4 Series
  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2015+
  3. (F34) 3-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+
  6. (F36) 4-Series Gran Coupe 2015+
BMW 5 Series
  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+
  10. (G30) 5-Series 2017+
BMW 6 Series
  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Convertible 2012+
  6. (F13) 6-Series Coupe 2012+
BMW 7 Series
  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+
BMW 8 Series BMW Classics (E9, Bavaria, Isetta, etc)
  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978
BMW X Series (SAV)
  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+
  12. (F48) X1 2016+
  13. (F48) X1 (2016+)
BMW Z Series
  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003
BMW 1600-2002 / tii BMW i Series
  1. (I01) BMW i3 2014+
  2. (I12) BMW i8 2014+
MINI Cooper and Cooper S
Racing
Racing Home Racing News Racing Schedule Racing Photo Gallery
Gallery
Photo Gallery Wallpaper Project Cars
  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone
Video Gallery
Projects
Turner BMW i8 Turner BMW F80 M3 Turner BMW F82 M4 Turner BMW X5 M Turner BMW F22 2 Series Turner BMW F13 M6 Turner BMW F10 M5 Turner BMW F30 335i Turner BMW E9X M3 Turner BMW E92 335i Turner BMW E82 1 Series Turner BMW ActiveE (100% Electric) Turner BMW E46 M3 Turner BMW E46 330i ZHP Turner BMW E36 M3 Turner BMW E30 M3 Turner MINI Cooper S McLaren F1 Turner BMW E92 M3 Lime Rock Turner BMW F80 M3 Silverstone
About Us
About Turner Motorsport Customer Feedback The Turner Team
  1. Open Positions
Returns Policy Shipping Info Contact Us Privacy Policy Security Policy FAQs

BMW F12 Specials, Deals & Discounts

You're currently viewing parts for your (F12) 6-Series Convertible 2012+. Reset your chassis
For accurate results, specify your model below.
Genuine BMW Coffee Mug & $100 Turner Motorsport Gift Certificate Special Gift Package! This BMW holiday gift package includes a $100 Turner Motorsport gift certificate (the perfect gift for any BMW enthusiast) and a Genuine BMW ceramic coffee mug. That's essentially a free authentic BMW coffee mug to give for that BMW lover on your shopping list.
Packaged by Turner
Part #: BMW-MUG-100TMS
Price: $100.00 (USD) 
$116.95 (Sale - Save 14%)
Ships in 5 days
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Tool - 32mm / 36mm Fan Clutch and Oil Filter Cap Open-End Wrench Why buy two tools when you can get one that will do many jobs like this open end wrench? It is great for removing and installing the fan clutch and plastic oil filter cap. Also works great for removing and installing the VAN0S solenoid on M50 engine family. Use the same tools the Turner Motorsport techs use!
Turner Motorsport
Part #: TMI9910334
Price: $44.39 (USD) 
$64.95 (Sale - Save 32%)
$64.95
Limited Qty Sale
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
F06/F13 M6 GranCoupe Dinan Sport Axle-Back Exhaust

Dinan sport mufflers are designed to compliment the M6 and not overpower the driver and passengers with harsh tones. Dinan engineers their exhausts to sound great and be a natural fit to the character of the car as well as produce more power and torque. Four 3.5" stainless tips engraved with the Dinan logo fill out the rear valence (choose either polished or satin black tips). Annoying highway drone has also been engineered out of the system. Dinan uses only 304 stainless steel in their systems for the maximum corrosion protection. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This setup is worth 3 point towards your Dinan badge.

This item fits the following BMWs:
2012+ F06 BMW M6 Gran Coupe
2012+ F12 F13 BMW M6

Dinan
Part #: F06M6-D660
Price: $2899.00 (USD) 
$3604 (Sale - Save 20%)
Direct Ship
F06/F13 650i Dinan Free Flow Axle-Back Exhaust

Dinan sport mufflers are designed to compliment the 650i and not overpower the driver and passengers with harsh tones. Dinan engineers their exhausts to sound great and be a natural fit to the character of the car as well as produce more power and torque. Four 3.5" stainless tips engraved with the Dinan logo fill out the rear valence (choose either polished or satin black tips). Annoying highway drone has also been engineered out of the system. Dinan uses only 304 stainless steel in their systems for the maximum corrosion protection. This system replaces the factory rear mufflers at a pre-determined cut point on the stock exhaust, which makes for an easy installation and you can reinstall your original mufflers using factory hardware. Detailed installation instructions are included.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This setup is worth 3 point towards your Dinan badge.

This item fits the following BMWs:
2012+ F06 BMW 650i 650iX Gran Coupe
2012+ F12 F13 BMW 650i 650iX

Dinan
Part #: F1350-D660
Price: $2599.00 (USD) 
$3089 (Sale - Save 16%)
Direct Ship
F06/F13 640iX/650iX Dinan 20

Dinan wheels improve performance and styling at the same time. These lightweight cast alloy wheels are wider than the factory BMW sizes to get more rubber to the ground. Finite element analysis has been done to create a wheel that is strong but light. These 20" wheels weigh in at around 27lbs apiece. The width and offset has been carfeully chosen to allow a wider tire to fit with no bodywork modifications. Wider tires are key to getting more grip and better handling. These one-piece alloy wheels meet German TUV, Japanese JWL, and US DOT specifications.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This setup is worth 2 point towards your Dinan badge.

Dinan Cast Alloy Wheel Specs -
F: 20x9.0, 27.3lbs (Dinan tire spec: 265/30-20 Michelin Pilot Super Sport tire)
F: 20x9.0, 27.3lbs (Dinan tire spec: 265/30-20 Michelin Pilot Super Sport tire)
Dinan center caps included
Requires short BMW valve stem (black stripe). Include new TPMS sensors and valve stems from the options below.

Fitment note 1: Dinan has specified fitment with the above Michelin tires. Any other tire with a similar or narrower mounted section width should work. A wider section width may result in rubbing.

This item fits the following BMWs:
2012+ F06 BMW 640iX 650iX
2012+ F12 F13 BMW 640iX 650iX

Dinan
Part #: D7500086910D6
Price: $629.10 (USD) 
$949 (Sale - Save 34%)
Direct Ship
Schwaben Locking Service Cart

An important factor when it comes to automotive work other than having the right tool for the job is how to keep those tools organized. The locking Service cart really comes in handy when you need to keep the tools you're using in place, but don't want to leave them out for theft.

 

Features:

  • Thru tray frame construction for stable support
  • 3" deep locking drawer with full extension roller bearing drawer slides
  • Chrome plated 16 gauge box frame and handles
  • 350 lbs load capacity supports heavy tools and equipment
  • Large, easy to maneuver 4" ball bearing swivel casters (2 are locking)
  • Beautiful & durable high gloss black powder coated finish
  • Height  - 35.3"
  • Length  - 30"
  • Depth - 16"
  • Weight  - 64.45lbs
Schwaben
Part #: 006692SCH01A
Price: $134.96 (USD) 
$179.95 (Sale - Save 25%)
In Stock
Quantity:   
Schwaben 1/4 A convenient ratchet with 1/4" & 3/8" drive options. The perfect ratchet when you're on the go, reducing the amount of tools you need to carry in case of a road side repair.
Schwaben
Part #: P34472-32
Price: $9.71 (USD) 
$12.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
SnowPerformance 2.5 Gal (9.3L) Reservoir This 2.5 gallon reservoir increases your capacity over the 3 quart tank that is included in most kits.
SnowPerformance
Part #: 40014
Price: $84.96 (USD) 
$99.95 (Sale - Save 15%)
Ships on Mar 12, 2018
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
SnowPerformance Stage 1 water/Meth Injection Kit - N52 N54 N55

The Snow Performance Stage 1 kit enables you to get the maximum performance out of your BMW. Whether tuning for more boost or seeking improved cooling, this kit is the ideal solution. This stage 1 controller, operates based on boost load. When your selected boost target is hit, the water/meth mix is injected through the nozzle. This system is ideal for low to medium boost set ups (1-15 PSI). Flow can also be set based on full throttle, among other user-controlled options. If you are looking for a system that operates off the MAF signal, see the Snow Performance Stage 2 kit. 

Features:

  • 300 PSI UHO (Ultra High Output) Pump
  • 3 Quart Reservoir
  • All Tubing Necessary for Installation
    • 10' ¼ Inch High Temp Nylon Tubing
    • 18" High pressure Boost Line
    • 3' (Black) Wire Loom
  • Boost Switch (1-15 PSI)
  • Pig Tail Harness
  • Level Switch Upgrade
  • 1 Nozzle Holder/Check Valve Combo
  • 2 Hyper-Sonic™ Nozzles
  • Required Hardware Needed For Installation
  • Snow Performance Running S Decal
  • Comprehensive Instructions to Install on Any Forced Induction Vehicle
  • Snow Performance 1-Year Warranty
  • MADE IN THE USA!
SnowPerformance
Part #: 20001
Price: $303.41 (USD) 
$356.95 (Sale - Save 15%)
In Stock
Free Shipping Free Shipping
Quantity:   
F12 Painted Front Bumper Reflectors - F12/F13 640i 650i We love the look of the new F12/F13 6 series. But the large orange reflectors on the front wheel arches HAS TO GO! These professionally painted reflectors replace the ugly orange reflectors with PERFECTLY COLOR MATCHED pieces so that they blend in perfectly with your bumper. No Simply remove your stock orange reflectors, and install these painted reflectors. Professional 3M adhesive makes installation a breeze, as well as insures these will be installed securely. These particular reflectors are for the 2012 and newer 6 series (F12/F13).

Please select your color below, using the drop down options.

This item fits the following BMWs:
2012+ F12 BMW 640i 650i 650i xDrive
Fits the standard bumper
Turner Motorsport
Part #: F12-REFLECTORS
Price: $45.00 (USD) 
$79.95 (Sale - Save 44%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Turner Motorsport Z4 Racecar T-Shirt - Black Welcome to 2014! Introducing our new Z4 GTD race car. The brand new Turner Motorsport BMW Z4 GTD competing in the TUDOR United SportsCar Championship comes to life on high quality 100% cotton black t-shirt. The shirt features some impressive illustrations of both the front and rear of the extremely wide and curvy Z4. The graphics pop off the shirt transitioning from a subtle gray scale to the Turner blue and yellow.

Get yours today, these are limited in quantity and won't last long. Choose size below.
Turner Motorsport
Part #: G200-BK
Price: $7.50 (USD) 
$24.95 (Sale - Save 70%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Daytona 2014 Livery Decal Set for Fujimi BMW Z4 GT 2013 Model Build your own Turner Z4 GTD / GT3 1:24 Scale Model! This decal sheet contains livery graphics to model the Turner Motorsport BMW Z4 as raced at the 2014 Daytona 24 hours. Decals are die cut for accuracy and fitment. The livery decals were created using our original livery design files, so we can vouch for its overall accuracy. The completed model looks incredible!

This graphics decal set is specifically designed for the Fujimi brand 1/24th scale BMW Z4 2013 kit. Model sold separately. Assembly required
Turner Motorsport
Part #: MSH-94
Price: $14.50 (USD) 
$20 (Sale - Save 28%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
BMW Motorsport Motion T-Shirt This shirt is perfect for wearing to the track, in the garage, or even just lounging around the house. This cotton t-shirt has the tri-color ///M stripes on the right sleeve, with a BMW race car print of the front.
Genuine BMW
Part #: 801424464215
Price: $75.59 (USD) 
$90 (Sale - Save 16%)
Ships in 4 days
BMW Motorsport Fan T-Shirt With a simplified ///M design and a small, rubberized BMW roundel on the sleeve, this subtle and stylish shirt is a very comfortable way to show your love of BMW cars. Navy blue in color, this cotton round-neck t-shirt will look great no matter where you are, at work or play.
Genuine BMW
Part #: 8014244642630
Price: $55.50 (USD) 
$68 (Sale - Save 18%)
Ships in 4 days
Schwaben European Car Electrical Terminal Tool Kit - 12 Pieces

This tool comes in handy especially when working with an engine harness. Certain areas are always prone to corrosion and this tool makes having to re-pin a connector a breeze.

Unlike small screwdrivers, picks, and paper clips, these tools are the correct size and shape to remove and install tiny electrical pins and terminals at plastic block connectors with ease, and will not damage the connectors in the process.

Packaged in a blow molded case to keep everything secure and organized.

Schwaben
Part #: ce-70-2
Price: $80.00 (USD) 
$89.95 (Sale - Save 11%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Schwaben Professional Quality Deluxe Two Shelf Service Cart

Having convenient carts make organizing a breeze and passing that on to getting the job done well.

Features:

  • Beautiful & durable high gloss black powder coated finish
  • 350lbs load capacity supports heavy tools, parts and equipment
  • Dual handles allow Push-Pull from either side for better maneuverability
  • Rugged thru tray frame construction for stable support
  • 3" Deep trays 
  • Large, easy to maneuver 4" ball bearing casters (2 are locking)

 

Dimensions:

  • Height - 35.3"
  • Length - 30"
  • Width - 16"
  • Weight - 37.5lbs
Schwaben
Part #: 005947SCH01A
Price: $89.95 (USD) 
$117.95 (Sale - Save 24%)
In Stock
Quantity:   
Schwaben 12 Ft 6 Gauge Booster Cables Looking for a high quality set of jumper cable to keep around for emergencies? These are it, don't settle for cheap budget sets found at most places.
Schwaben
Part #: 007269SCH01
Price: $20.21 (USD) 
$26.95 (Sale - Save 25%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Turner Motorsport Custom Tough Case iPhone 4 / 4S The best iPhone case just got a bit better! We've taken the Tough Case iPhone cover and customized it with a photo of the Turner Motorsport #96 E92 M3, running hard at Barber Motorsports Park.

The Tough iPhone 4 / 4S case uses dual layers of resilient material for a rugged case that protects the object of your affection with a defensive style. The base layer is a form-fitting silicone skin that completely surrounds the iPhone 4 / 4S, adding a layer of cushion that absorbs shocks and impacts.The outer layer is an impact resistant, polycarbonate hard shell fits that fits directly on top of the silicone skin for extra iPhone protection.A solid finish makes the iPhone 4 / 4S case easy-to-hold, while the streamlined design keeps the silhouette slim enough to fit in your pocket.

Dimensions: 4.62 x 2.39 x 0.45 in (117.2 x 60.6 x 11.3 mm)
Turner Motorsport
Part #: 96-IPHONE
Price: $17.50 (USD) 
$24.95 (Sale - Save 30%)
$24.95
Limited Qty Sale
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
Turner Motorsport Blipshift Z4 Racecar T-Shirt - Black Your 328i may not yet be a full blown GT racecar, but adding that short shift kit gets you one step closer. Monday morning's 5 minute long red light is a chance to daydream of the 180mph high banks of Daytona! Every mod is a life enhancement with daily rewards.

Introducing the winner of the Racing Bimmers Tee Design Contest by Blipshift honoring Turner Motorsport's continued success with BMW racecars! From e30s to last season's monster Z4, Turner has stayed true to BMWs since 1993, amassing 7 championships.

Congrats to Anthony, winner of the Pit Crew Experience with the Turner team this season at Mazda Raceway Laguna Seca!

Only available at TurnerMotorsport.com. Choose from Fitted T-shirt or Beefy T
Turner Motorsport
Part #: BS-Z4-FITTED
Price: $12.00 (USD) 
$19.95 (Sale - Save 40%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
F10 535i F12/13 640i Supersprint Turbo Cat-Less Downpipes

The stock down pipes cause a major restriction in the exhaust flow. BMW's solution to deal with the limited space in the engine compartment is to crush the turbo outlet tubes to reduce the size of the tubing. Doing this created undesirable backpressure. For emission purposes the factory also incorporated built-in pre-cats directly after the turbo outlet ports. This make the exhaust gas backpressure rise to extremely high levels at all rpm and engine loads. This design retains excessive heat in the engine and affects performance in a negative way. The design of the Supersprint down pipes takes advantage of even the smallest space available and frees the exhaust gas flow dramatically. The SS pipe cross section (no crushed pipe) remains constant all along the down pipes and the pre-cats are totally eliminated.

Supersprint exhaust is widely recognized as the leader in complete exhaust system upgrades - extremely high quality, well designed for optimal flow, and amazing sound. Even at a premium price Supersprint is an unbeatable exhaust system because every aspect is done to such a high level. A Supersprint exhaust rewards you with a terrific sound, long lasting construction and excellent fitment. The Supersprint sound is very 'European' which fits the sporting sophistication of BMWs perfectly. Most systems are also modular - sections can be added or removed to custom tailor the exhaust sound to your preferance. Aside from 'Race' systems, their mufflers meet European noise laws so you get a refined and tuned sound without being excessively loud. Most Supersprint systems are built with larger diameter piping to improve exhaust flow which helps the engine do less work and make more horsepower! Supersprint exhausts generally run at a premium over other systems but no other system on the market can match their quality, performance, or reputation!

material:T304 stainless steel

This part alters or deletes the emissions equipment on your car. Because of this, we require a waiver of emissions compliance to be signed and sent in to TMS. You can download the waiver here.

Supersprint
Part #: 986311KT
Price: $615.60 (USD) 
$820.80 (Sale - Save 25%)
In Stock
Quantity:   
Turner Motorsport Ladies' Tank Top Show your support for Turner Motorsport and your favorite BMW race team and parts supplier with these stylish blue cotton Turner Motorsport tank tops. The tanks feature a yellow logo. Available in three sizes.
Turner Motorsport
Part #: TMSTANK
Price: $5.80 (USD) 
$19.95 (Sale - Save 71%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Red Line 40WT Race Oil

All sets of 12 now 10% off regular price

We have been using RedLine Oil in our street cars and race cars for years. Hands-down, it is the Number One brand of high performance lubricant for BMWs. For use where temperatures may be high and when a wide range in RPMs and speeds will be encountered.

Redline
Part #: REDLINE21A
Price: $12.17 (USD) 
$14.95 (Sale - Save 19%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
BMW Motorsport Heritage T-Shirt Take a fast trip down memory lane every time you wear this 1970s-inspired BMW Motorsport t-shirt. Printed with the classic motorsport logo, this form-fitting t-shirt will look great on you, even if you drive an F30 instead of a 3.0CSL.
Genuine BMW
Part #: 8014244593842
Price: $53.86 (USD) 
$66 (Sale - Save 18%)
Ships in 4 days
Schwaben Metric Bubble Flaring Tool Set

When replacing old corroded brake lines this is a must have tool to get the job done right. Create a bubble flare to match the connection style is an important part of creating the proper seal. Don't forget your tube cutter.

 

Features:

  • Creates the ISO bubble flare found on European, Japanese and some domestic model brake lines.
  • Includes hardened steel bar and adapters for 4.75mm,6mm,8mm and 10mm tubing.
  • Durable blow molded case for easy transport and organization

 

 

Schwaben
Part #: 006394SCH01A
Price: $49.96 (USD) 
$79.95 (Sale - Save 38%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
SnowPerformance Stage 3 Boost Controller - N54 N55

This stage 3 boost controller will easily upgrade your existing stage 2 kit to stage 3. This digital boost controller gives you the ability to easily dial in your setup - simply set your start and full points, and the software handles the rest. Two buttons allow you to make adjustments. The LCD display shows boost pressure, fuel injector duty cycle, and flow percentage. 

Features:

  • LCD Screen
  • Digital Variable mapping
  • Comprehensive Instructions
SnowPerformance
Part #: 60061
Price: $356.11 (USD) 
$418.95 (Sale - Save 15%)
Ships on Mar 12, 2018
Free Shipping Free Shipping
Quantity:   
Turner Loaded Backpack Gift Package

Pick up our rugged OGIO backpack along with some Turner goodies and pocket nearly $25 in savings! Spoil yourself this season!

Our "Stuffed Backpack" package includes:
+ $50 Turner Gift Certificate
+ Turner OGIO Backpack
+ Turner Pint Glass
+ Turner Cap
+ Turner Keychain
+ Turner Motorsport Sticker Sheet

Packaged by Turner
Part #: GP153
Price: $115.86 (USD) 
$140.00 (Sale - Save 17%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
Quantity:   
BMW Motorsport DTM Team Polo Shirt - Men's Sporty polo is detailed with BMW logo and PUMA® logo at chest, white and red stripes along the sides and BMW M stripes and sponsor logos on the sleeves. “Powered by BMW M” wordmark and BMW M logo at back hem and BMW Motorsport wordmark between the shoulders.100% cotton. European fit. Imported
Genuine BMW
Part #: TMS338518
Price: $45.75 (USD) 
$56.15 (Sale - Save 19%)
In Stock
Free Shipping Free Shipping
on orders $199 and up
OEM Style Hose Clamps Hose clamps for radiator hoses, coolant hoses, vacuum hoses, or intake hoses. These hose clamps are the same style as your OEM hoses with a smooth inside band to prevent cutting into the hose material.

Features:
  • 9mm band width
  • 6mm hex & slotted head
  • Smooth inside of band = optimal hose protection
  • OEM
  • 430 Stainless steel band and housing with zinc plated steel screw
  • Asymmetric housing = even distribution of forces and prevents tilting of the clamp when tightening
  • Screw support = ease of assembly due to the safe guidance of the emerging band
  • Short housing saddle = even contact pressure = improved efficiency

    Part NumberDescriptionClamping Range in MMClamping Range in Inches
    008-12T8-12 HOSE CLAMP8mm-12mm5/16"-1/2"
    008-16T8-16 HOSE CLAMP8mm-16mm5/16"-5/8"
    012-20T12-20 HOSE CLAMP12mm-20mm1/2"-3/4"
    016-27T16-27 HOSE CLAMP16mm-27mm5/8"-11/16"
    020-32T20-32 HOSE CLAMP20mm-32mm3/4"-1 1/4"
    025-40T25-40 HOSE CLAMP25mm-40mm1"-1 5/8"
    030-45T30-45 HOSE CLAMP30mm-45mm1 3/16"-1 3/4"
    032-50T32-50 HOSE CLAMP32mm-50mm1 3/8"-2"
    040-60T40-60 HOSE CLAMP40mm-60mm1 5/8"-2 3/8"
    050-70T50-70 HOSE CLAMP50mm-70mm2"-2 3/4"
    060-80T60-80 HOSE CLAMP60mm-80mm2 3/8"-3 1/8"
    070-90T70-90 HOSE CLAMP70mm-90mm2 3/4"-3 1/2"
    080-100T80-100 HOSE CLAMP80mm-100mm3 1/8"-4"
    090-110T90-110 HOSE CLAMP90mm-110mm3 1/2"-4 3/8"
    110-130T110-130 HOSE CLAMP110mm-130mm4 3/8"-5 1/8"
  • Turner Motorsport
    Part #: Hose-Clamps
    Price: $0.57 (USD) 
    $2.19 (Sale - Save 74%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Turner Motorsport Double Win T-shirt 2013 These 100% cotton t shirts feature the #94 and #96 Turner Motorsport BMW M3s as raced in the Grand Am Series on the back with the Turner Motorsport Logo on the front. Available in sizes Small-XXL.
    Turner Motorsport
    Part #: TMS338546
    Price: $14.99 (USD) 
    $ (Sale - Save 0%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Mega-Stuffed Backpack Gift Package Our favorite 2016 BMW gift ideas, conveniently bundled in our new backpack. Can't decide which Turner Motorsport works best? Get them all and save $137! This makes a great package for one or more Bimmer fans in your family.

    Our "Mega Stuffed Backpack" package includes:
    + $200 Turner Gift Certificate
    + Turner OGIO backpack
    + Turner Pint Glass
    + Turner Keychain
    + Turner Flexfit Baseball Cap
    + Turner Knit Cap
    + Turner 1/4 Zip Pullover
    + "Adrenalin" BMW Motorsport DVD
    + Minichamps Turner Z4 1/43 model
    + Turner Motorsport Sticker Sheet

    Choose a hat option and pullover size from the options below.
    Packaged by Turner
    Part #: GP155
    Price: $360.95 (USD) 
    $ (Sale - Save -0%)
    Ships on Apr 26, 2018
    Turner Motorsport Z4 Racecar 2014 GTD Champions T-Shirt - Black Celebrate our 2014 GTD Championship with the Z4 GTD race car. The Turner Motorsport BMW Z4 GTD won 4 races, and had 6 podiums and 10 top-ten finishes in the TUDOR United SportsCar Championship. This high quality 100% cotton black t-shirt features the Turner Z4 GTD on the back and Turner logo on the front.

    Get yours today, these are limited in quantity and won't last long. Choose size below.
    Turner Motorsport
    Part #: G200-WIN
    Price: $17.47 (USD) 
    $24.95 (Sale - Save 30%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Genuine BMW Set Clutch Parts - 21207603248 - E92,E93,F10,F12,F13

    OE replacement clutch kit from BMW that is stock for the 335is, 550i, and 650i and is an upgrade for the 135i 335i and 535i!

    Includes:

    • Clutch friction disc
    • Throwout/release bearing
    • Clutch fork lever
    • Pressure plate
    • Pressure plate bolts

     
    Genuine BMW Set Clutch Parts -
    This item fits the following BMW Chassis:
    E92,E93,F10,F12,F13

     

    Genuine BMW
    Part #: 21207603248
    Price: $399.95 (USD) 
    $581.15 (Sale - Save 32%)
    In Stock
    Free Shipping Free Shipping
    Quantity:   
    BMW Motorsport Rain Jacket This rain jacket is lightweight, but don't let that fool you — it will protect you from wind and rain and look great doing it. Navy blue design with red accents and a tri-color ///M stripe on the right sleeve, it's a stylish way to show your BMW pride while staying warm and dry at the same time.
    Genuine BMW
    Part #: 8014244644651
    Price: $63.65 (USD) 
    $78 (Sale - Save 18%)
    Ships in 4 days
    Men's BMW Motorsport Polo If you're looking to show off your BMW pride, but you need something just a bit more highbrow than a t-shirt, this BMW Motorsport polo shirt is just the ticket. Both men's and women's designs feature subtle touches like BMW Motorsport lettering on the left breast and a small BMW roundel on the sleeve. Men's shirts are Team Blue while women's shirts are white with a Motorsport stripe motif.
    Genuine BMW
    Part #: 801424464315
    Price: $89.76 (USD) 
    $110 (Sale - Save 18%)
    Ships in 4 days
    Wheel Bolt Pattern Gauge

    This Schwaben tool easily and quickly measures wheel bolt circle on multible lug patterns. Including 3-4-5 and 6 lug patterns. Construction is a quality all aluminum billet tool made to last a lifetime.

    • X3 = 3 lug wheel sizes on one side of pattern tool. Containes 10 different bolt patterns. 
    • X4 = 4 lug wheel sizes on one side of the pattern tool. Contains 10 different bolt patterns.
    • X5 = 5 lug wheel sizes and shows on two sides of the pattern tool. Contains 12 different  bolt patterns.
    • X6 = 6 lug wheel sizes and shows on one side of pattern tool. Contains 5 different  bolt patterns.

    NOTE: Loosen sliding arm, insert into wheel or center on studs. Tighten thumb screw gently. Measure bolt pattern on inside of arm.

    NOTE: 5 lug patterns has measurement on two different sides of the tool. if it does not line up to a mark look on opposite side for more 5 lug sizes.

     

    Schwaben
    Part #: 009619SCH01A
    Price: $18.71 (USD) 
    $24.95 (Sale - Save 25%)
    In Stock
    Free Shipping Free Shipping
    on orders $199 and up
    Quantity:   
    SnowPerformance Stage 2 Boost-Controlled Water/Meth Injection Kit - N20 N54 N55 N63 S55 S63

    The Snow Performance Stage 2 Boost Cooler™ is the most advanced gauge style water-meth system on the market. This kit includes a boost referenced VC-50 controller, the Stage 2 has the ability to progressively command 2 Hyper-Sonic™ Nozzles on an independent basis. This sophisticated injection system yields the highest increases in HP and cooling all along the power band. The VC-50 controller features a dual 7 color OLED screen and displays boost, percentage of injection, low level, and 2 fault modes (clogged line/unplugged line) directly on the screen. 

    Features:

    • 300 PSI UHO (Ultra High Output) Pump
    • 3 Quart Reservoir
    • All Tubing Necessary for Installation
      • 10' ¼ Inch High Temp Nylon Tubing
      • 18" High pressure Boost Line
      • 3' (Black) Wire Loom
    • 2 1/16 VC-50 Controller
    • Pigtail Harness
    • 2 1/16 Gauge Pod
    • Level Switch Upgrade
    • 1 Nozzle Holder/Check Valve Combo
    • 2 Hyper-Sonic™ Nozzles
    • Required Hardware Needed For Installation
    • Snow Performance Running S Decal
    • Comprehensive Instructions to Install on Any Forced Induction Vehicle
    • Snow Performance 1-Year Warranty 
    • MADE IN THE USA!
    SnowPerformance
    Part #: SN0210
    Price: $467.49 (USD) 
    $549.99 (Sale - Save 15%)
    Ships in 1 day
    Free Shipping Free Shipping
    Quantity:   
    SnowPerformance Stage 2 MAF-Based Water/Meth Injection Kit - N55

    The Stage 2 kit from Snow Performance, allows you to extract the maximum amount of power from your N55. If you're looking to run more boost or , this kit is the perfect solution. This kit operates based on 0-5 volt signal from your vehicles Mass Air Flow Sensor - this signal allows the controller to adjust flow progressively, giving you accurate injection across the whole power band. 

    Features:

    • 300 PSI UHO (Ultra High Output) Pump
    • 3 Quart Reservoir
    • MAFU Progressive Controller for Use With All MAF/MAP Sensors
    • Pig Tail Harness
    • All Tubing Necessary for Installation
      • 10' ¼ Inch High Temp Nylon Tubing
      • 3' (Black) Wire Loom
    • Level Switch Upgrade
      • 1 Nozzle Holder/Check Valve Combo
      • 2 Hyper-Sonic™ Nozzles
      • Required Hardware for Install
      • Snow Performance Running S Decal
      • Comprehensive Instructions to Install on Any Vehicle Utilizing a MAF/MAP Sensor
      • Snow Performance 1-Year Warranty 
      • MADE IN THE USA!
      SnowPerformance
      Part #: 20012
      Price: $410.51 (USD) 
      $482.95 (Sale - Save 15%)
      In Stock
      Free Shipping Free Shipping
      Quantity:   
      Turner Motorsport - Rolex Side View - Child's T-Shirt These 100% cotton tshirts feature the Turner Motorsport BMW M3 as raced in the Rolex 24 at Daytona. Available in either Toddler sizes (2T,3T, or 4T) or Youth sizes (XS, S, M, or L).
      Turner Motorsport
      Part #: TMS5556
      Price: $8.75 (USD) 
      $9.95 (Sale - Save 12%)
      In Stock
      Free Shipping Free Shipping
      on orders $199 and up
      BMW Motorsport Seat Belt Shoulder Pad Set These original BMW Motorsport shoulder pads fit over any street car seat belt or 2" harness belt. A zippered side makes these super easy to install on any car. High quality "BMW MOTORSPORT" embroidery will set your car apart from the rest. Also available in 76mm (3") harness width. Set includes two shoulder pads.
      Genuine BMW
      Part #: MSBELT50MM
      Price: $89.95 (USD) 
      $105.62 (Sale - Save 15%)
      In Stock
      Free Shipping Free Shipping
      on orders $199 and up
      Turner Motorsport - Future Race Car Driver Child's - T-Shirt Every kid dreams of being a be race car driver. These bright yellow children's tshirts show off your/their enthusiasm for racing and support for the Turner Motorsport Grand-Am and Rolex teams. Available in either Toddler sizes (2T,3T, or 4T) or Youth sizes (XS, S, M, or L). 100% cotton.
      Turner Motorsport
      Part #: FUTURE-DRIVER
      Price: $8.75 (USD) 
      $14.95 (Sale - Save 41%)
      In Stock
      Free Shipping Free Shipping
      on orders $199 and up
      Borla Cat-Back S-Type Sport Exhaust - F12 M6 Unleash the sound of the F13 M6's V8 with this Borla exhaust system! The V8 sounds so nice with this exhaust, you'll wonder why BMW didn't spec it like this from the beginning. If you've felt the sound is too quiet and distant this is the perfect M6 exhaust upgrade. The middle S-Spec exhaust not too loud, not too quiet. It's just right. Borla builds their exhaust with the goal of enhancing the sound - not just making it outrageously loud. In fact, Borla exhausts deliver some of the quietest and most pleasing sounds of all of the aftermarket brands we have seen. This Borla exhaust produces a deep rumble perfectly suited to the V8. It's a throaty sound that any American muscle car fan will appreciate. Yet it manages to be civilized and unobtrusive when needed. This system bolts on after the factory catalytic converters for an easy install. This system features a 3.0" pipe diameter leading into the mufflers (2.25" on exit) with 3.5" tips.

      Every Borla is made with 304 stainless steel for the internals and muffler body. Unlike other systems that can use coated aluminum, mild steel, or 409 stainless, the Borla uses true 304 stainless on the inside as well as the outside. This prevents the muffler from rusting and deteriorating from the inside out. Borla guarantees every muffler with a 1,000,000 mile warranty. Turner Motorsport has been the leading Borla dealer for BMW exhausts since we sold our first system in 1996, including using Borla Exhausts on every Turner BMW racecar.

      This item fits the following BMWs:
      2012+ F12 BMW M6
      Borla
      Part #: 140582
      Price: $3489.68 (USD) 
      $3920.99 (Sale - Save 11%)
      Direct Ship
      Free Shipping Free Shipping
      Quantity:   
      Extra-Large Turner Motorsport Toolbox Sticker (5x8

      THE IDEAL TOOLBOX STICKER!

      Cast some positive Turner vibes on your track build with this extra-large vinyl TURNER MOTORSPORT sticker. About as long as an arm, this is a great statement piece anywhere around the shop. 

      While supplies last. Limit one per customer, please!

      Turner Motorsport
      Part #: 148-410
      Price: $8.95 (USD) 
      $19.95 (Sale - Save 55%)
      In Stock
      Free Shipping Free Shipping
      on orders $199 and up
      Quantity:   
      $100 Turner Motorsport Gift Package Special Gift Package! This BMW holiday gift package includes a $100 Turner Motorsport gift certificate (the perfect gift for any BMW enthusiast) and a Genuine BMW ceramic coffee mug. That's essentially a free authentic BMW coffee mug to give for that BMW lover on your shopping list. No matter what BMW your gift recipient owns, or what they need, you know they can choose exactly what they want from our THOUSANDS of BMW products, parts and BMW accessories. Offer valid while supplies last.

      Limit 1 Gift Package per customer.
      Packaged by Turner
      Part #: GC100
      Price: $100.00 (USD) 
      $118.95 (Sale - Save 16%)
      In Stock
      Free Shipping Free Shipping
      on orders $199 and up
      Quantity:   
      Red Line 50WT (15w50) SAE Race Oil

      All sets of 12 now 10% off regular price!

      We have been using RedLine Oil in our street cars and race cars for years. Hands-down, it is the Number One brand of high performance lubricant for BMWs. For use where extremely high temperatures may be encountered and when engine durability is the primary concern.

      Redline
      Part #: REDLINE24A
      Price: $8.38 (USD) 
      $14.95 (Sale - Save 44%)
      In Stock
      Free Shipping Free Shipping
      on orders $199 and up
      SnowPerformance Boost Juice - 1 Gallon

      Snow Performance Boost Juice™ is proprietary blend of 49% methanol and 51% purified water. Made in a controlled environment with special care to make sure the ratios are accurate, Boost Juice™ ultra consistent performance when used in conjunction with the Boost Cooler™ injection system. Boost Juice™ is required as the exclusive fluid to maintain the lifetime warranty in the Boost Cooler™ meth injection system. 

      Shipping restrictions dictate that customers are limited to one gallon per order per day.

      SnowPerformance
      Part #: 40008KT
      Price: $7.61 (USD) 
      $8.95 (Sale - Save 15%)
      In Stock
      Free Shipping Free Shipping
      on orders $199 and up
      Quantity:   
      F06/F13 640i/650i Dinan 20

      Dinan wheels improve performance and styling at the same time. These lightweight cast alloy wheels are wider than the factory BMW sizes to get more rubber to the ground. Finite element analysis has been done to create a wheel that is strong but light. These 20" wheels weigh in at around 27lbs apiece. The width and offset has been carfeully chosen to allow a wider tire to fit with no bodywork modifications. Wider tires are key to getting more grip and better handling. These one-piece alloy wheels meet German TUV, Japanese JWL, and US DOT specifications.

      For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. This setup is worth 2 point towards your Dinan badge.

      Dinan Cast Alloy Wheel Specs -
      F: 20x9.0, 27.3lbs (Dinan tire spec: 265/30-20 Michelin Pilot Super Sport tire)
      F: 20x10.0, 27.8lbs (Dinan tire spec: 285/30-20 Michelin Pilot Super Sport tire)
      Dinan center caps included
      Requires short BMW valve stem (black stripe). Include new TPMS sensors and valve stems from the options below.

      Fitment note 1: Dinan has specified fitment with the above Michelin tires. Any other tire with a similar or narrower mounted section width should work. A wider section width may result in rubbing.

      This item fits the following BMWs:
      2012+ F06 BMW 640i 650i
      2012+ F12 F13 BMW 640i 650i

      Dinan
      Part #: D7500085910D6
      Price: $629.10 (USD) 
      $999 (Sale - Save 37%)
      Direct Ship
      Black Forest Industries Billet Heavy Weight Shift Knob - Red, Black, or Silver

      This weighted shift knob makes shifts faster and the extra-large globe shape encourages over-palm shifting. The Black Forest Industries Billet Knob weighs in at 8.8oz (250g), about twice as much as a stock knob and a little heaver than the BMW ZHP knob. The heavier knob amplifies the pendulum motion of the shift lever resulting in smoother and faster shift times. BFI has designed this knob for BMW and VW fitments to fit snug on the shift lever and be secured with Allen set screws. They were careful to reduce tolerances compared to universal knobs. The overall height of the BFI knob is the same as stock anatomic knobs (some BMW M/Performance models have a stock knob that is shorter than this one).

      Included with the BFI Billet knob is a matching BFI crest shift emblem. A 5 or 6-speed pattern emblem is available separately.

      Black Forest Industries
      Part #: GS1RB
      Price: $84.99 (USD) 
      $99.99 (Sale - Save 15%)
      In Stock
      BMW Motorsport Jacket This lightweight windbreaker features a drawstring at the waist to keep wind from chilling you to the bone, while its weather-resistant material repels rain. It even includes a built-in headphones pocket. Navy blue and white, this BMW Motorsport jacket features a reflective zipper and motorsport stripes on the back.
      Genuine BMW
      Part #: 801424464415
      Price: $220.34 (USD) 
      $270 (Sale - Save 18%)
      Ships in 4 days
      BMW Motorsport Paper Jacket This Tyvek jacket is lightweight, tear resistant, and best of all, ready for autographs from your favorite drivers. It folds up easily for storage. Includes BMW Motorsport letting, a roundel on the sleeve, and motorsport stripes on the back.
      Genuine BMW
      Part #: 8014244641620
      Price: $44.88 (USD) 
      $55 (Sale - Save 18%)
      Ships in 4 days
      BMW Motorsport Puma Drift Cat 5 Driving Shoes These shoes will go with any outfit while subtly displaying your love of BMWs. The heel has a small BMW roundel with BMW Motorsport lettering, while the understated color scheme is as stylish as it is subtle.
      Genuine BMW
      Part #: 8016244650513
      Price: $220.34 (USD) 
      $270 (Sale - Save 18%)
      Ships in 4 days
      Turner Motorsport Blipshift Z4 Racecar Womens Fitted T-Shirt Your 328i may not yet be a full blown GT racecar, but adding that short shift kit gets you one step closer. Monday morning's 5 minute long red light is a chance to daydream of the 180mph high banks of Daytona! Every mod is a life enhancement with daily rewards.

      Introducing the winner of the Racing Bimmers Tee Design Contest by Blipshift honoring Turner Motorsport's continued success with BMW racecars! From e30s to last season's monster Z4, Turner has stayed true to BMWs since 1993, amassing 7 championships.

      Congrats to Anthony, winner of the Pit Crew Experience with the Turner team this season at Mazda Raceway Laguna Seca!

      Womens sizes Small, Medium and Large. Fitted.
      Turner Motorsport
      Part #: BSW-Z4-FITTED
      Price: $6.00 (USD) 
      $19.95 (Sale - Save 70%)
      In Stock
      Free Shipping Free Shipping
      on orders $199 and up
      Turner Motorsport Mens Championship T-Shirt Celebrate our championship victories from the past several years including our most recent 2011 GS Championship. These t-shirts are official Turner wear, as seen worn by employees and our championship winning race team personnel. Turner Motorsport logo on the front with images of the various championship winning cars on the back.

      Also available in Long Sleeve
      Turner Motorsport
      Part #: 920-2014-x
      Price: $12.95 (USD) 
      $14.99 (Sale - Save 14%)
      In Stock
      Free Shipping Free Shipping
      on orders $199 and up
      MSI 14x1.25 Bullet Nose Racing Wheel Studs with Dry Lube - F10 F30 F80 F82 F87

       

      • 70MM, 80MM, OR 90MM OVERALL LENGTH
      • OUR HIGHEST-GRADE PREMIUM WHEEL STUD
      • DRY LUBE WITH BLACK M-PHOSPHATE COATING
      • STUD FOR RACE/TRACK USE
      • CORRECT SHOULDER SIZE FOR A WIDE RANGE OF HUBS/BRAKE ROTORS
      • USE WITH 14x1.5 NUT
      • For the very best in a race-grade wheel stud, stop looking! These are the wheel studs that our race teams insist on (after years of trying every stud design on the market). MSI Racing specializes in hardware for motorsport use (NASCAR and IMSA) and other advanced industries. We tried them on our Grand-Am/IMSA racecars and were very impressed by the performance and durability of their designs. Race wins and championships can come down to the seconds of a pitstop. We could run any wheel stud in the world and we use these. After testing them over the course of a few endurance seasons we decided to offer them to all of our customers as well.

        These studs are available in three overall lengths - 70.5mm, 80.5mm, and 90.5mm. All sizes are made with aircraft quality alloy steel and have roll formed threads for greater strength than cut threads. We use a dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish. Manganese is preferred over the more common zinc because it's better at reducing friction and wear to prevent thread galling. With the dry lube applied over the phosphate this is the best corrosion resistance we have seen in any wheel stud! Salt tests have shown this stud is superior to others in corrosion resistance. The dry lube helps the nut engage and glide over the threads for faster engagement without cross threading or binding. Other features of our MSI studs include a large bullet nose nut-starter and a properly sized shank to work with a wider range of BMW wheel, nut, and brake rotor combinations. We intentionally avoid the extra large shoulders you see on other studs because they can interfere with some brake rotor hats. The extra large shoulder can be too large to allow the rotor to pass through and drilling out the holes is required (not cool!) Our studs have the sufficient shank for the brake rotor without interfering.

        We configured these studs to have a 14x1.25 thread to go into the wheel hub. But the exposed stud has 14x1.5 threads. We did this because threading a nut is faster on 1.5 threads than a finer 1.25 thread pitch, which saved us time during pitstops. There are also more wheel nut options in 14x1.5. When you order our 14x1.25 studs make sure you also order the 14x1.5 nuts.
         

        FREE red threadlocker with purchase of a full set of wheel studs (16 or more)MSI Dry Lube Bullet Nose Wheel Stud Features:

      • Dry film lubricant HM-30 coating containing Teflon & Moly over a manganese phosphate finish
      • Innovative nut-starter and bullet shape radius that all but eliminates cross-threading
      • Properly sized shank to work with a wide range of brake rotor, wheel, and nut combinations
      • Heat-treated aircraft quality alloy steel
      • Developed from over 20 years of top level NASCAR use
      • These studs are installed using the traditional 'double-nut' method (one regular nut and one jam nut) with thread locking compound (Red Turbo-Lock or similar).

        Sold per stud.
        Wheel nuts sold separately.
      Turner Motorsport
      Part #: MSI-M14X125
      Price: $8.98 (USD) 
      $11.95 (Sale - Save 25%)
      In Stock
      Free Shipping Free Shipping
      on orders $199 and up
      H&R 3mm Wheel Spacers (Pair) - F30, F10 M5, F06/F13 M6, F32

      3mm = .12"
      5/120 bolt pattern; 72.5 center bore
      DR type = spacer fits in between the wheel and the hub. Longer wheel bolts are recommended.
      Hubcentric = Yes*, the original hub lip still protrudes through the spacer 

      H&R's 3mm wheel spacers are Made in Germany and are TUV approved. H&R manufacturers their spacers from a super lightweight aluminum/magnesium alloy for excellent strength and also to save unsprung weight. The spacers are drilled for additional lightness and easy fitment. They are then hard anodized for durability. These are not low quality universal spacers - the bolt pattern, hub sizing, and other dimensions are designed to be used on BMW models only. This spacer has a larger mounting surface specifically designed for the larger mounting pad of F30 wheels. 

      This spacer slips on the existing hub lip and leaves some lip left over for the wheel to rest on. This keeps the wheel hubcentric*.
      * - To avoid vibration, 3mm spacers work best with wheels that have a flush mounting surface. Wheels that have a bevel around the mounting surface will not be fully seated on the hub and a vibration may result. 

      Longer wheel bolts are strongly recommended. Choose from black or silver bolts from the options below. Wheel locks to work with this spacer size are also available. 
       

      Wheel Spacer FAQ

      How To Measure for Spacers

      Wheel Spacer Encyclopedia - everything you wanted to know


      This item fits the following BMWs:
      2012+ F30 BMW 320i 320i xDrive 328d 328d xDrive 328i 328i xDrive 335i 335i xDrive - Sedan
      2013+ F31 BMW 328i xDrive 328d xDrive - Wagon
      2013+ F32 BMW 428i 428i xDrive 435i 435i xDrive - Coupe
      2013+ F33 BMW 428i Convertible 428i xDrive Convertible 435i Convertible - Convertible
      2014+ F36 BMW 428i Gran Coupe 428i xDrive Gran Coupe 435i Gran Coupe 435i xDrive Gran Coupe
      2011+ F10 BMW M5
      2012+ F12 BMW M6
      2013+ F06 BMW M6 Gran Coupe

      H&R
      Part #: 675726
      Price: $95.45 (USD) 
      $112.45 (Sale - Save 23%)
      Direct Ship
      Seatbelt 3-point Receptacle - Macht Schnell Adding seats and keeping your stock 3-point belt? You're going to need this set of brackets to attach the old belt receptacle to the new floor mount. Nearly all BMW seats have the inboard belt buckle attached to the seat. So you will need to remove that buckle and transfer it to your new floor bracket. If you're using the Macht Schnell floor brackets these plates mount in between the sliders and seat. They are made from thick steel then powedercoated in stealthy black. These are sold as a pair to fit one seat and the Macht Schnell floor mounts (may require modification for use on other brand floor mounts). Fits most coupe or sedan models from 1992-2012, including E36, E46, E82, E9X, and Z4 models.

      Sold per seat.

      This item fits the following BMWs:
      2008-2012 E82 BMW 128i 135i 1M Coupe
      1992-1998 E36 BMW 318i 318is 318ti 323is 325i 325is 328i 328is M3
      1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi M3 (not convertibles)
      2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive M3 - Sedan
      2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
      2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive M3 - Coupe
      2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si Z4 M Roadster M Coupe
      Macht Schnell
      Part #: 79.12.12X
      Price: $112.50 (USD) 
      $125 (Sale - Save 10%)
      In Stock
      Free Shipping Free Shipping
      on orders $199 and up
      AR Design 4

      Narrow exhaust pipes can be a major restriction to performance. If you are looking for top of the line downpipes, AR Design has you covered with their Hi-Flo Downpipes. These are perfect to add power, performance, and stunningly good looks. Made 100% in the United States of 3" 304 stainless steel tubing and expertly welded with some of the best looking welds on the market, the guys at AR Design are so confident in their material and build quality, they give you a lifetime warranty against manufacturing defects and a three year warranty against rust and corrosion.

      These performance downpipes produce more power than the stock exhaust pipes and add a sporty exotic tone to your exhaust note. These downpipes also include a Race Catalytic Converter to ensure both high flow and emissions compliance for cars driven on the street in addition to the track.

      These are available as stainless or with a ceramic coating rated up to 2000 degrees Fahrenheit. This helps keep the heat from radiating into the engine bay, keeping air intake temperatures much lower! Two coating options are available: Silver and Black.

      Included in this kit:

      • 3" Downpipes
      • Race Cats
      • "Bomb-Proof" exhaust gaskets
      • Grade 10.9 metric hardware for high durability

      Fits the following vehicles:
      F06/12/13 BMW
       6 Series with N55 Engine
      F10 BMW 5 Series with N55 Engine

      AR Design
      Part #: N554CDP
      Price: $929.07 (USD) 
      $999 (Sale - Save 7%)
      Direct Ship
      AR Design 3

      Narrow exhaust pipes can be a major restriction to performance. If you are looking for top of the line downpipes, AR Design has you covered with their Hi-Flo Downpipes. These are perfect to add power, performance, and stunningly good looks. Made 100% in the United States of 3" 304 stainless steel tubing and expertly welded with some of the best looking welds on the market, the guys at AR Design are so confident in their material and build quality, they give you a lifetime warranty against manufacturing defects and a three year warranty against rust and corrosion.

      These performance downpipes produce more power than the stock exhaust pipes and add a sporty exotic tone to your exhaust note. These downpipes also include a Race Catalytic Converter to ensure both high flow and emissions compliance for cars driven on the street in addition to the track.

      These are available as stainless or with a ceramic coating rated up to 2000 degrees Fahrenheit. This helps keep the heat from radiating into the engine bay, keeping air intake temperatures much lower! Two coating options are available: Silver and Black.

      Two types of fitments are available: 2-bolt Style and Slip Fit Style

      Included in this kit:

      • 3" Downpipes
      • Race Cats
      • "Bomb-Proof" exhaust gaskets
      • Grade 10.9 metric hardware for high durability

      Fits the following vehicles:
      F01/02 BMW
       750i/li s/xDrive with N63 V8 engine
      F07/10 BMW 550i s/xDrive with N63 V8 engine
      F12 BMW 650i s/xDrive with N63 V8 engine

      AMC
      Part #: FXXN63CDP
      Price: $1626.57 (USD) 
      $1749 (Sale - Save 7%)
      Direct Ship
      BMW Motorsport Hoodie Stay warm when the weather gets rough with this BMW Motorsport hooded sweatshirt. It's plenty comfortable, with thumb holes and concealed side pockets. The hood itself features a tri-color ///M stripe, while a rubberized BMW Rounded resides on the left sleeve.
      Genuine BMW
      Part #: 8014244643640
      Price: $145.26 (USD) 
      $178 (Sale - Save 18%)
      Ships in 4 days
      Get notified about money saving
      specials & deals for your BMW
      enter your email address
    • 22 years of BMW Tuning.
    • Award winning service.
    • 10,000's of parts in stock.
    • Quality BMW Parts only.
    • Hassle-free returns.

    • Find us on Facebook



      • 1-800-280-6966
        Mon-Thur 9am-6pm ET, Fri 9am-5pm ET

        • © TurnerMotorsport.com 1993-2018. All Rights Reserved.