click to Chat Live
Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart
Home
Categories
Specials Gifts & Clothing
  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages
Brakes
  1. Brake Overhaul Packages
  2. Brake Pads
  3. Brake Pad Sensors
  4. Brake Rotors
  5. StopTech Big Brake Kits
  6. Stainless Steel Brake Lines
  7. Brake Fluid
  8. Brake Calipers
  9. Caliper Rebuild Kits
  10. Parking Brake Parts
  11. Brake Cooling Ducts & Backing Plates
  12. Brake Pads - Brembo GT BBK Calipers
  13. Brake Pads - StopTech BBK Calipers
  14. Hydraulic Hand Brakes
Car Care & Accessories
  1. Car Covers
  2. Wheel & Tire Cleaning
  3. Wax, Polish and Cleaning Supplies
  4. Detailing Gear
  5. Leather & Plastic Care
  6. Car Cleaning Supplies
  7. Chassis Paint, Coatings, Sealants, and Rust Conversion
Drivetrain
  1. Differential and Gearing Upgrades
  2. Differential Mounts and Upgrades
  3. OEM Clutch Kits & Clutch Parts
  4. Performance Clutch Kits & Parts
  5. Clutch Parts
  6. UUC Short Shift Kits
  7. Axle Shafts
  8. Performance Short Shift Kits
  9. Transmission Parts
Engine Chips
  1. Performance Flash Software, 2005+ Models
  2. Sprint Booster Drive-by-Wire Module
Engine Parts
  1. Engine Performance Packages
  2. Water Pumps
  3. Thermostats
  4. Radiators & Cooling System Overhaul Kits
  5. Radiator Hoses, Cooling Hoses, & Hose Sets
  6. External Engine Parts
  7. Drive Belts & V-Belts
  8. Gaskets, Gasket Sets, Seals, & O-Rings
  9. Factory-Spec Replacement Turbos and Kits
  10. Crankcase Vent, PCV, and Oil Separator Systems
  11. Turbo Upgrades and Kits
  12. Electrical Sensors, Switches, & Relays
  13. Ignition Parts
  14. Alternator & Alternator Parts
  15. Fuel System Parts
  16. Internal Engine Parts
  17. Cylinder Head Parts & Head Bolts
  18. VANOS Units & Parts
Exhaust
  1. Supersprint Performance Exhaust Systems
  2. Performance Headers & Downpipes
  3. Dinan Free Flow Exhaust Systems
  4. Performance Exhaust Systems
  5. Exhaust System Upgrades
  6. Exhaust Muffler Tips
  7. Oxygen Sensor - O2 Sensors
  8. Exhaust Gaskets Hangers and Parts
Exterior / Body
  1. Black Grills
  2. Emblems & Decals for Hood, Trunk, and Wheels
  3. Front Spoilers, Bumper Covers, & Air Dams
  4. Rear Spoilers, Rear Wings, & Aprons
  5. Body Trim Parts & Accessories
  6. License Plate Brackets & License Plate Frames
  7. Mirror Kits & Mirror Parts
  8. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  9. Hood Pins and AeroCatch Latches
  10. Racing Tow Hooks and Tow Straps
  11. Aero & Body Kits
Intake
  1. aFe Cold-Air Intake Kits
  2. Dinan Cold Air Intake Kits
  3. Gruppe M Cold-Air Intake Kits
  4. Performance Intake Kits
  5. aFe Performance Air Filters
  6. K&N Performance Air Filters
  7. Intake Cleaning & Recharging Kits
  8. Intake Manifold Components (DISA, Vacuum, CCV, Etc)
  9. BOV, Chargepipe, and Intercooler Upgrade Kits
  10. Mass Air Sensor & Air Flow Meters
  11. Intake Boots & Hoses
  12. Other Intake Kits
Interior
  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. Factory Steering Wheels
  7. Racing Steering Wheels
  8. Shift Knobs, Shift Boots, & Shift Handles
  9. Seats & Seat Accessories
  10. Seat Belts and Racing Harnesses
  11. Cup Holders and Storage
  12. Carbon Fiber Interior Parts
  13. Interior Switches and Switchgear
  14. Sunshades & Windscreens
  15. Interior Trim & Accessories
Lighting
  1. Bulbs for Headlights, Turn Signals and Tail Lights
  2. Headlights, Headlight Lenses, & Headlight Parts
  3. Stealth Bulbs
Maintenance
  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Cabin Air Filters, Heppa Filters, & Microfilters
  5. Ignition Coils
  6. Spark Plugs
  7. Service Reset Tools & Fault Code Readers
  8. Anti-Freeze and Coolant
  9. Engine Oils - Genuine BMW and OEM
  10. Power Steering and Hydraulic Fluids
  11. Transmission and Gear Oil - Genuine BMW and OEM
  12. MOTUL Engine Oil and Gear Lubricants
  13. Red Line Oil & Fluids
  14. Liqui-Moly Oil and Additives
Suspension
  1. Shocks & Struts
  2. H&R Performance Springs
  3. Dinan Performance Springs
  4. Spring & Shock Packages
  5. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  6. H&R Coil Over Suspensions
  7. KW Coil Over Suspensions
  8. Sway Bar Kits
  9. Sway Bar Links & Sway Bar Parts
  10. Camber / Caster Kits
  11. Strut Braces & Stress Bars
  12. Control Arm Replacements & Upgrades
  13. Suspension Bushings & Mounts
  14. Tie Rods & Steering Parts
  15. Coil Over Spring Hardware
  16. AC Schnitzer Suspension Kits
  17. Sachs Performance Coil Over Suspension
Wheels
  1. Apex Flow Formed Alloy Wheels
  2. Forgeline Custom Forged Alloy Wheels
  3. HRE FlowForm Performance Alloy Wheels
  4. D Force Flow Formed Alloy Wheels
  5. Original BMW Wheels and Wheel Upgrades
  6. Turner Motorsport Wheel Spacers
  7. ECS Tuning Wheel Spacers
  8. H&R Wheel Spacers
  9. Wheel Bolts, Wheel Studs and Nuts
  10. Wheel Emblems, Caps, and Accessories
  11. High Performance Wheels
Tools
  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Coil Over Wrenches
  5. Cooling System Tools
  6. Cylinder Head and VANOS Tools
  7. Exhaust Tools
  8. Fan and Fan Clutch Tools
  9. Fault Code Readers and OBD Scan Tools
  10. Fuel System Tools
  11. Genuine BMW Tool Kits
  12. Oil Service Tools
  13. Sockets
  14. Spark Plug Sockets
  15. Transmission and Differential Tools
  16. Wheel Pin Tools
  17. Workshop Chemicals
Clearance
Choose BMW
BMW 1 Series
  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+
BMW 2 Series
  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+
  3. (F87) M2 2016+
BMW 3 Series
  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+
  18. (F34) 3-Series Gran Turismo 2014+
BMW 4 Series
  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2015+
  3. (F34) 4-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+
  6. (F36) 4-Series Gran Coupe 2015+
BMW 5 Series
  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+
  10. (G30) 5-Series 2017+
BMW 6 Series
  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Coupe 2011+
  6. (F13) 6-Series Convertible 2011+
BMW 7 Series
  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+
BMW 8 Series BMW Classics (E9, Bavaria, Isetta, etc)
  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978
BMW X Series (SAV)
  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+
  12. (F48) X1 2016+
  13. (F48) X1 (2016+)
BMW Z Series
  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003
BMW 1600-2002 / tii BMW i Series
  1. (I01) BMW i3 2014+
  2. (I12) BMW i8 2014+
MINI Cooper and Cooper S
Racing
Racing Home Racing News Racing Schedule Racing Photo Gallery
Gallery
Photo Gallery Wallpaper Project Cars
  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone
Video Gallery
Projects
Turner BMW i8 Turner BMW F80 M3 Turner BMW F82 M4 Turner BMW X5 M Turner BMW F22 2 Series Turner BMW F13 M6 Turner BMW F10 M5 Turner BMW F30 335i Turner BMW E9X M3 Turner BMW E92 335i Turner BMW E82 1 Series Turner BMW ActiveE (100% Electric) Turner BMW E46 M3 Turner BMW E46 330i ZHP Turner BMW E36 M3 Turner BMW E30 M3 Turner MINI Cooper S McLaren F1 Turner BMW E92 M3 Lime Rock Turner BMW F80 M3 Silverstone
About Us
About Turner Motorsport Customer Feedback The Turner Team
  1. Open Positions
Returns Policy Shipping Info Contact Us Privacy Policy Security Policy FAQs

BMW F22 aFe Cold-Air Intake Kits

BMW F22 aFe Cold-Air Intake Kits Founded in 1999, Advanced Flow Engineering (aFe) produces high flow, high performance replacement air filters and complete cold-air intake systems for BMWs. Each precision-engineered intake component and filter offers excellent design and construction, lifetime cleanable cotton filters that breathe easier than paper filters, powder-coated heat shields to block out hot engine air, and measurable performance gains resulting in increased horse power and torque. aFe's reputation is fast growing as a manufacturer and designer of quality and functional intake kits with excellent fit and finish and reasonable cost.

aFe enigneers their kits for each individual model application, even designing air filters from scratch to maximize the available surface area of the low pressure zone. They then offer their intake components in packages that fit your tastes and needs -
Replacement Performance Filter. A direct performance replacement filter for your stock air box.
Dynamic Air Scoops. Metal scoops or ducts that create a 'ram-air' effect to the intake.
Super Stock System. A performance filter combined with Dynamic Air Scoops and Throttle Body Spacer for power gains while keeping the OEM appearance.
Stage 1 Kit. A cone-filter kit with vehicle-specific heat shield and intake tubing to replace a stock airbox.
Stage 2 Kit. All of the components in a Stage 1 Kit plus additional intake tubing or ducting after the air box or air mass meter.
Sealed Intake. A Stage 1 or 2 Kit with an enclosed airbox and heat shield. The filter area is maximized inside a vehicle-specific airbox and then sealed with a cover for a OEM-type appearance.
You're currently viewing parts for your (F22) 2-Series Coupe 2014+. Reset your chassis
For accurate results, specify your model below.
aFe Restore Kit for ProDry S Dry Filters This eco-friendly air filter cleaner is for the aFe Pro Dry S performance air filter. Simply spray on and wash off and your Pro Dry S air filter is good to go. Please follow the instrucctions with the kit and you will have a lifetime of horsepower.
AFE
Part #: 90-59999
Price: $17.96 (USD) 
$19.95 (Sale - Save 10%)
In Stock
Free Shipping Free Shipping
Quantity:   
aFe Intake Kit - F30 335i F32 435i 2012+ - Stage 2 Intake Pro5R or ProDry S This aFe Stage 2 cold air intake system for BMW F30 335i and F32 435i with the N55 engine, produces 14 max horsepower, 18 lbs. x ft. torque and out-flowed the factory intake by 29%. This system includes a durable 18-gauge, powder-coated heat shield and features either a washable/reusable conical Pro 5R filter for maximum flow or a Pro Dry S filter for lower maintenance requirements. This air filter is constructed with 100% polyurethane, for long life and multiple cleaning cycles. A huge 3.5 inch one-piece mandrel bent wrinkle-black powder-coated intake tube, maximizes air velocity providing maximum performance and throttle response. This is a direct bolt-on kit and requires no cutting or drilling. 

Filter Flange Retention Design:  
The air filter uses a unique (patent pending) flange retention design that requires no hardware to mount the filter to the heat shield to provide a quick hassle-free installation with minimal hardware. 

One-Piece Intake Tube:  
A large mandrel-bent intake tube is used to smoothly direct the increased air flow into the engine for maximum performance. 

6" Tall Conical Filter:  Choose either Pro Dry S performance air filter for maximum convenience or Pro5r oiled filter for maximum flow for increased horsepower and torque. This intake utilizes a huge, 6" tall conical performance air filter for increased performance. The PRO 5R air filter uses five layers of progressively finer mesh cotton gauze media to provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall, open, evenly spaced pleats provide excellent dust holding capacity for a longer service cycle between cleanings. 

One-Piece Filter Housing:  The air filter is housed in a one-piece, black powder-coated 18-gauge heat shield that keeps warm engine air out for maximum performance. This one-piece heat shield uses factory mounting locations and comes with all hardware for a hassle-free installation. 

Easy Installation:  aFe has developed this intake to provide a hassle-free installation that utilizes all factory mounting locations. 

Dyno Tested Intake Tube:  The intake tube is designed to maximize air velocity and is dyno tested and flowed using the latest engineering tools for maximum performance, mileage and throttle response. 

Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles. 

Choose from 54-12202 Pro5R kit or 51-12202 ProDrys kit. 

This item fits the following BMWs:  
2014+  F22 BMW  M235i M235i xDrive 
2012+  F30 BMW  335i 335i xDrive - Sedan 
2013+  F32 BMW  435i 435i xDrive - Coupe 
AFE
Part #: 5X-12202
Price: $420.26 (USD) 
$466.95 (Sale - Save 10%)
Direct Ship
AFe Intake KIt - Momentum GT With Carbon Fiber Accent - N55 BMW F87 M2, F30 335ix, F31/34 335i/ix, F32/33/36 435i/ix, F20/21 135i/ix, F22 M235i

HP Gain: +15hp
Trq Gain: +13ft-lbs
Airflow: +20% over stock

aFe has engineered the Momentum GT intake to outperform the stock air box and deliver substantial power and torque gains over the factory system. The system has been CAD designed to achieve the maximum volumetric flow rate into the turbo. The intake tube is a smooth, unobstructed single piece from the air inlet to the airbox and incorporates a port for the air flow sensor. aFe's advanced engineering and design have made this a direct bolt-in intake upgrade.

The aFe filter has been designed specifically for this application and uses aFe's high flow/low maintenance design. The ProDry S filter has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe Pro5R filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

 

Fitment:

  • 2012-2015 F30 BMW 335ix  3.0L N55 
  • 2013-2015  F31/34 BMW 335i/ix 3.0L N55 
  • 2014-2016 F32/33/36 BMW 435i/ix  3.0L N55 
  • 2012-2016 F20/21 BMW M135i/ix 3.0L N55 
  • 2014-2016 F22 BMW M235i  3.0L N55
AFE
Part #: 5276311AFE
Price: $555.26 (USD) 
$616.95 (Sale - Save 10%)
In Stock
aFe Restore Kit for Pro5R Oiled Filters

Bring your aFe filter back to life with a Restore kit from aFe. Included is filter cleaner & replacement oil. These air filter oils is designed to not harm MAF sensors, while allowing the filter to catch as much debris as possible.

Used for Pro 5 R filters

AFE
Part #: 55-10460
Price: $16.16 (USD) 
$17.95 (Sale - Save 10%)
In Stock
Quantity:   
aFe Intake Kit - F30 328i F32 428i F22 228i - Stage 2 Intake Pro5R or ProDry S

This Stage-2 cold air intake system for the F30 328i with N20 engine, resulted in 11 max horsepower, 15 lbs. x ft. torque and out-flowed the factory intake by 38% on the 2012+ BMW 328i (F30) N20 Turbo. This system includes a durable 18-gauge, powder-coated heat shield and features a either a washable/reusable conical Pro 5R air filter for maximum flow or a ProDry S :oil-free" filter for maximum convenience. The Pro 5R air filter uses five layers of progressively finer mesh cotton gauze oiled media to provide maximum airflow for best performance results. The PRO DRY S air filter uses three layers of progressively finer mesh cotton gauze media to provide maximum airflow for best performance results. A 3 inch one-piece mandrel bent wrinkle-black powder-coated intake tube and bracket, maximizes air velocity providing maximum performance and throttle response. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.

  • 7" Conical Air Filter - Choose either Pro Dry S performance air filter for maximum convenience or Pro5r oiled filter for maximum flow for increased horsepower and torque.
  • Dyno Tested Intake Tube: The intake tube is designed to maximize air velocity and is dyno tested and flowed using the latest engineering tools for maximum performance, mileage and throttle response.
  • One-Piece Heat-Shield: The air filter is housed in a one-piece, black powder-coated 18-gauge heat shield that keeps warm engine air out for maximum performance. This one-piece heat shield snaps onto the lower half of the factory air box to provide a quick and easy installation utilizing factory mounting locations.
  • Optional Intake Cover-Interested in reducing air intake noise on your 5X-12212 stage-2 intake for the 2012-2014 BMW 328i (F30)? aFe Power now offers an intake cover to do just that. This lightweight vacuum form plastic cover bolts right up to the intake housing and comes with all necessary hardware, no modification is necessary.

Choose from 54-12212 Pro5R kit or 51-12212 ProDryS kit

This aFe intake fits the following BMWs:
2014+ F22 BMW 228i 228i xDrive
2012+ F30 BMW 320i 320i xDrive 328i 328i xDrive - Sedan
2013+ F31 BMW 328i xDrive - Wagon
2014+ F32 BMW 428i Coupe & Convertible, 428i xDrive Coupe & Convertible
Only for cars with N20 engine

AFE
Part #: 54-12212-X
Price: $420.26 (USD) 
$466.95 (Sale - Save 10%)
In Stock
aFe Throttle Body Spacer - E9X 335i/xi 2011+ w N55 engine, F30 335i, F32 435i Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque - +6 hp, +13 lbs/ft torque - and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers. This spacer was dynoed with a aFe air filter and dynamic air scoop.

This item fits the following BMWs:
2014+ F22 BMW M235i M235i xDrive
2011 E90 BMW 335i 335xi 335i xDrive - Sedan
2011-2012 E92 BMW 335i 335xi 335i xDrive - Coupe
2011-2012 E93 BMW 335i - Convertible
2012+ F30 BMW 335i 335i xDrive - Sedan
2013+ F32 BMW 435i 435i xDrive - Coupe
2014+ F34 BMW 335i xDrive GT - Gran Tourismo
2014+ F36 BMW 435i Gran Coupe 435i xDrive Gran Coupe
2013+ E84 BMW X1 xDrive35i
2011+ F25 BMW X3 xDrive35i
2015+ F26 BMW X4 xDrive35i
ONLY for cars with N55 twin scroll turbo engine.
AFE
Part #: 46-31007
Price: $269.10 (USD) 
$299.00 (Sale - Save 10%)
Direct Ship
Free Shipping Free Shipping
Quantity:   
AFe MagnumFORCE Stage-2 Pro DRY S "Oil-Free" ProDry S Filter

This intake kit replaces the top-half of both your factory air boxes. It features two 3-angle aluminum velocity stack adapters, 1.6mm powder-coated steel heat shields, trim sealed to seal out hot engine air, two custom aFe brand cotton filters, all hardware, and installation instructions.

This version has an oil-free filter media for less maintenance. For the best flowing filter, with the best performance gain, we always recommend the standard aFe "Pro5R " filter (which has a blue pre-oiled filter media), but this oil-free filter flows only slightly less than the blue Pro5R style aFe filter, and requires no re-oiling after cleaning the filter.

By removing your stock intake air box, you are removing the most restrictive portion of your engine's intake system, increasing both horse power and torque, improving acceleration as well as throttle response.
AFE
Part #: 51-12202
Price: $404.10 (USD) 
$449.00 (Sale - Save 10%)
In Stock
Free Shipping Free Shipping
Quantity:   
aFe Intake Kit - F30 335i F32 435i 2012+ - Stage 2 Si Sealed Intake Pro5R or ProDry S

This Stage 2 Sealed Intake for BMW F30 335ii with N55 turbo motor, produces 11HP, 15LBS. x FT. of torque and outflows the factory intake by 37%. This sealed air intake system features a washable/reusable 7.5" conical air filter that improves airflow for increased horsepower, torque and throttle response. The air filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.The sealed housing features three auxiliary air inlet ducts for increased airflow. To finish off your underhood appearance, an attractive vacuum formed ABS plastic cover is used to provide easy access to the filter for servicing and an aggressive look. To complete this system, a dyno tuned molded plastic intake tube with velocity stack adapter replaces the stock intake tract and directs air flow with improved volumetric efficiency for maximum intake velocity.

  • 7.5" Conical Air Filter - Choose either Pro Dry S performance air filter for maximum convenience or Pro5r oiled filter for maximum flow for increased horsepower and torque. This intake utilizes a huge, 7-1/2" tall conical PRO 5R performance air filter for increased performance. The PRO 5R air filter uses five layers of progressively finer mesh cotton gauze media to provide maximum airflow for best performance results. Washable and reusable for multiple cleaning cycles, the tall, open, evenly spaced pleats provide excellent dust holding capacity for a longer service cycle between cleanings.
  • One-Piece Filter Housing - The air filter is housed in a one-piece, patent pending black roto-molded airbox that keeps warm engine air out for maximum performance. This one-piece airbox has a built in clear sight window which allows you to inspect the filter with no disassembly.
  • Dyno Tested Intake Tube: - this system uses a C.A.D. designed intake tube which is dyno tuned to achieve maximum power gains while maintaining a perfect fit.
  • Horizontal Louvers: The louvers were added to the roto-molded airbox to increase the cold air to the air filter.
  • Housing/Air Filter Interface: This intake system features a unique patent pending filter to air box interface that creates a flawless seal.

 

Choose from 54-82202 Pro5R kit or 51-82202 ProDrys kit.


This aFe intake fits the following BMWs:
2014+ F22 BMW M235i M235i xDrive
2012+ F30 BMW 335i 335i xDrive - Sedan
2013+ F32 BMW 435i 435i xDrive - Coupe

AFE
Part #: 5X-82202
Price: $476.10 (USD) 
$529 (Sale - Save 10%)
In Stock
aFe Intake Kit - F22 228i, F30 328i, and F32 428i - Stage 2 Sealed Intake Pro5R or ProDry S

This Stage 2 Sealed Intake for BMW F30 328i and F32 428i with N20 turbo motor, produces 10HP, 14LBS. X FT. of torque and outflows the factory intake by 42%. This sealed air intake system features a washable/reusable 6" conical air filter with inverted top that improves airflow for increased horsepower, torque and throttle response. The air filter is constructed with 100% polyurethane for long life and multiple cleaning cycles.The sealed housing features two auxiliary air inlet ducts for increased airflow. To finish off your underhood appearance, an attractive vacuum formed ABS plastic cover with carbon fiber finish is used to provide easy access to the filter for servicing and an aggressive look. To complete this system, a dyno tuned molded plastic intake tube with velocity stack adapter replaces the stock intake tract and directs air flow with improved volumetric efficiency for maximum intake velocity.
 

  • 3.5" Conical Air Filter - Choose either Pro Dry S performance air filter for maximum convenience or Pro5r oiled filter for maximum flow for increased horsepower and torque.
  • Fully Sealed Design - The air filter is housed in a one-piece, patent pending, black roto-molded air box that keeps warm engine air out for maximum performance.
  • Mounts In Factory Location - aFe has developed this intake to provide a hassle-free installation that utilizes all factory mounting locations.
  • Dyno Tested Intake Tube: The intake tube is designed to maximize air velocity and is dyno tested and flowed using the latest engineering tools for maximum performance, mileage and throttle response.
  • Horizontal Louvers: The louvers were added to the roto-molded airbox to increase the cold air to the air filter.
  • Please choose either N20 ULEV (ultra low emission vehicle) or N26 SULEV (Super Low Emission Vehicle). The N26 engine was optional in markets with stricter emissions standards such as California and New York.

    Choose from 54-82212 Pro5R kit or 51-82212 ProDryS kit

    This aFe intake fits the following BMWs:
    2014+ F22 BMW 228i 328i xDrive
    2012+ F30 BMW 320i 320i xDrive 328i 328i xDrive - Sedan
    2013+ F31 BMW 328i xDrive - Wagon
    2014+ F32 BMW 428i Coupe & Convertible, 428i xDrive Coupe & Convertible
AFE
Part #: 54-82212-X
Price: $461.66 (USD) 
$512.95 (Sale - Save 10%)
In Stock
Get notified about money saving
specials & deals for your BMW
enter your email address
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook




    • 1-800-280-6966
      Mon-Thur 9am-6pm ET, Fri 9am-5pm ET

      • © TurnerMotorsport.com 1993-2017. All Rights Reserved.