Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW F22 Performance Flash Software, 2005+ Models

BMW F22 Performance Flash Software, 2005+ Models The Fastest Way To More Power - Up To 120hp!!!

Our Performance Software makes more horsepower and torque with no downsides! Performance software is the icing on the cake, the finishing touch, or the capstone for your BMW tuning project. Software ties it all together - maximizing output from upgrades where the factory software can't keep up. The factory software is actually programmed around 87 octane which de-tunes the performance of the car. Our software is set to 91 as a mimimum, allowing us to be more aggressive with the programming. We can refine and adjust the factory limitations, opening up the potential for more horsepower or refinement from your current upgrades. We also tune the software to fix defects and rough edges in the stock software, making the car easier and more enjoyable to drive.

We have been tuning BMW software since 1995, making us one of the most experienced BMW tuners in North America. Over the years we have experimented and tested many different forms and brands of performance software, including developing our own on our Dynapack chassis dyno. Our Performance Software catalog includes tunes and upgrades that best suit your BMW and your upgrade goals.

Turner Motorsport Performance Flash Software features:
+ dyno developed, real-world tested
+ ignition and fuel timing adjustments
+ cam timing, including VANOS and Valvetronic
+ raised rev limit*
+ top speed de-limited*
+ part throttle and full throttle mapping
+ improved throttle response
+ specific software for most major upgrades - cold-air intakes, sport exhaust, etc
+ race software for removing catalytic converters**

* - on select models
** - not legal for street use, emissions liability waiver required
You're currently viewing parts for your (F22) 2-Series Coupe 2014+. Reset your chassis
For accurate results, specify your model below.
AC Schnitzer Performance Module

This Performance Module is a direct plug-in to the existing engine harness for a factory appearance and fitment and an instant power increase without risk. This offers more power and torque without the hassle of an in-depth, time-consuming install! It installs in less than 30 minutes and is completely reversible which makes this the easiest and most effective power upgrade you will ever make on this car. If you're looking for a substantial bump in power output, with minimal downtime for installation, full serviceability, and can be reverted back to stock then the AC Schnitzer power module is the way to go! 

Schnitzer got it's start racing BMW's in 1967 and has since gone onto win many championships in DTM, WTCC and other touring car series. In 1987 AC Schnitzer started manufacturing custom high performance products for BMW's using their knowledge from years of racing and winning with BMW's. AC Schnitzer offers the highest quality components for your BMW. 

AC Schnitzer
Part #: 110082340-48
Price: $4695.00 (USD) 
Direct Ship
Quantity:   
Stage 3 DINANTRONICS Elite Kit for N20 Electronic Wastegate Vehicles

The Dinan tuner box plugs into the existing sockets on your engine computers The original wiring harness plugs into the Dinan tuner box. There is no cutting or splicing into wires and the whole harness is completely reversible at any time.

Because the Dinantronics module plugs directly into the engine computer, it can control the data from every sensor on the engine - not just the two or three that other piggyback-style modules use. Instead of only modifying a boost and RPM sensor, the Dinan power module sends a modified signal for fuel and ignition tables, target Lambda (AFR), exhaust temperature, knock sensors, and more. It has the ability to correct short term fuel trim and ignition timing errors so even as the boost increases through the whole RPM range the engine mapping remains where it should. Not only does it make a lot of peak power, but it's also a smooth and consistent power gain over the entire RPM band. The Dinan tuner module is the most sophisticated on the market and is the only one that is 50-state legal.

This kit fits cars with a mechanical wastegate, which was replaced with an electronic one  around production date 6/2013. If your car was produced in June 2013 you should check which one your car has prior to ordering. Installation is plug and play but requires access to the entire engine compartment. The engine computer(s) is part of the intake manifold so access is tight. The Dinan module is installed under the radiator support and the harness has to be run to each computer. Detailed instructions are included but professional installation is strongly advised if you're not used to working around your engine.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The Dinan tuner is worth 3 point towards your Dinan badge.

This item fits the following BMWs:
F2x/F3x 28i N20 with electronic wastegate

Dinan
Part #: D440-1632-ST3
Price: $1855.03 (USD) 
Direct Ship
Quantity:   

N26 SULEV DINANTRONICS Stage 1 Performance Tuner

For California vehicles with N26 engine
N26 SULEV DINANTRONICS Stage 1 Performance Tuner

The Dinantronics Power Module is the least invasive way of getting more power from your 228/328/428 SULEV. The Dinan tuner box plugs into the existing sockets on your engine computer(s). The original wiring harness plugs into the Dinan tuner box. There is no cutting or splicing into wires and the whole harness is completely reversible at any time. Dinan has shown a gain of 36hp and 44ft-lbs of torque with this system.

Because the Dinantronics module plugs directly into the engine computer, it can control the data from every sensor on the engine - not just the two or three that other piggyback-style modules use. Instead of only modifying a boost and RPM sensor, the Dinan power module sends a modified signal for fuel and ignition tables, target Lambda (AFR), exhaust temperature, knock sensors, and more. It has the ability to correct short term fuel trim and ignition timing errors so even as the boost increases through the whole RPM range the engine mapping remains where it should. Not only does it make a lot of peak power, but it's also a smooth and consistent power gain over the entire RPM band. The Dinan tuner module is the most sophisticated on the market and is the only one that is 50-state legal.

Installation is plug and play but requires access to the entire engine compartment. The engine computer(s) is part of the intake manifold so access is tight. The Dinan module is installed under the radiator support and the harness has to be run to each computer. Detailed instructions are included but professional installation is strongly advised if you're not used to working around your engine.

For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The Dinan tuner is worth 3 point towards your Dinan badge.

This item fits the following BMWs with the SULEV N26 engine:
2014+ F22 F23 BMW 228i 228iX
2012-2015 F30 BMW 328i 328i X-Drive - Sedan
2012-2015 F31 BMW 328i X-Drive - Touring Wagon
2012-2016 F32 BMW 428i 428i X-Drive - Coupe
2013-2016 F33 BMW 428i 428i X-Drive - Convertible
2012-2015 F34 BMW 328i 328i X-Drive - Gran Turismo
2012-2016 F36 BMW 428i 428i X-Drive - GranCoupe

Dinan
Part #: D440-1633-ST1
Price: $1590.32 (USD) 
Direct Ship
Free Shipping Free Shipping
Quantity:   
aFe Scorcher Programmer Upgrade - N55 - E82 135i, E9X 335i, F30 335i, F32 435i, F10 535i, E70 X5 35i, E71 X6 35i As Used on our Project F30 335i THE EASIEST WAY TO MORE POWER
HP gain = up tp 40 hp
Trq gain = up tp 80 ft-lbs
Plug And Play Engine Harness!
Power Without Worry!


There's no secret to getting additional power from a turbo engine - turn up the boost! But it's easy to take things too far and become "boost drunk". If what you're after is a generous bump in power without worrying about reliability, compromises, or additional modifications the aFe Power Scorcher is perfect for you. We've tried the Scorcher in a number of different BMWs and can report back that it works flawlessly!

Our findings:
  • Incredibly simple installation - by the third car we tested with we had the install down to 5 minutes!
  • High build quality - it looks and feels like a real part - not homemade like others we have seen
  • Immediate power gains - right from our parking lot we could feel the substantial difference
  • Affordable power - great bang for the buck
    The Scorcher is a plug-and-play tuning module that installs on the engine wiring harness and modifies the signals from the manifold pressure sensors. The new signals are then sent to the engine computer which increases boost based on the modified signal. The power gains are instantly noticeable and the module has been fully engineered to deliver a smooth and reliable power boost over all RPM. aFe developed this module upgrade on their in-house Mustang and Dynojet dynos as well as using them on their own BMW 135s and 335s. There are other products that give more power (for additional cost and complexity) but more boost also brings more complications. This is all of the power you need without additional drama and trickery. The Scorcher can be used on its own or combined with other aFe Power products for the total package.

    The install is very easy with no cutting or modification to existing components. Unplug the harness from your MAP sensors and plug it into the Scorcher module. Then plug the Scorcher harness into the MAP sensors. Mount the module wherever you wish (Velcro and zip ties included). A blue LED lets you know the module is plugged in correctly and functioning. You can also revert back to stock just as easily! The Scorcher is built with a 0.1% tolerance on critical components. Each connector is an OE type for the best and most secure fitment and they use high quality wiring with excellent heat and chemical resistance. The module box is aluminum with a hardcoat anodize finish. This is way beyond the other 'resistor in a box' products on the market. aFe warranties the complete unit for two years.

    BMW used two different TMAP sensors on the intake pipe. You will need to confirm which TMAP sensor is installed on your car. Refer to this image, and the drawing on the right, for more information: click here.

    This item fits the following BMWs:
    2011-2013 E82 BMW 135i
    2014+ F22 BMW M235i M235i xDrive
    2011 E90 BMW 335i 335xi 335i xDrive - Sedan
    2011-2013 E92 BMW 335i 335is 335xi 335i xDrive - Coupe
    2011-2013 E93 BMW 335i - Convertible
    2012+ F30 BMW 335i 335i xDrive - Sedan
    2014+ F34 BMW 335i xDrive GT - Gran Tourismo
    2013+ F32 BMW 435i 435i xDrive - Coupe
    2013+ F33 BMW 435i Convertible - Convertible
    2014+ F36 BMW 435i Gran Coupe 435i xDrive Gran Coupe
    2010+ F07 BMW 535i GT, 535i xDrive GT
    2011+ F10 BMW 535i 535i xDrive
    2012+ F12 BMW 640i 640i xDrive
    2013+ F06 BMW 640i Gran Coupe 640i xDrive Gran Coupe
    2012+ F01 BMW 740i 740li 740li xDrive
    2013+ E84 BMW X1 xDrive35i
    2011+ F25 BMW X3 xDrive35i
    2015+ F26 BMW X4 xDrive35i
    2011+ E70 BMW X5 xDrive35i
    2014+ F15 BMW X5 sDrive35i X5 xDrive35i
    2011+ E71 BMW X6 xDrive35i
  • AFE
    Part #: 77-4630x
    Price: $449.00 (USD) 
    Direct Ship
    Free Shipping Free Shipping
    F22 M235, F3X 335/435 MPPK 7/2013+ DINANTRONICS Stage 2 Performance Tuner

    F22 M235, F30 335/435 Dinan Stage 2 Software Tuner includes tuning for:

    • Dinan Carbon Intake
    • Dinan Axle-Back Exhaust

    In addition to increasing boost and optimizing the fuel and ignition data, the Dinantronics Power Module is tuned for the Dinan Intake and Dinan Exhaust on the N55. The Dinan tuner box plugs into the existing sockets on your engine computers The original wiring harness plugs into the Dinan tuner box. There is no cutting or splicing into wires and the whole harness is completely reversible at any time.

    Because the Dinantronics module plugs directly into the engine computer, it can control the data from every sensor on the engine - not just the two or three that other piggyback-style modules use. Instead of only modifying a boost and RPM sensor, the Dinan power module sends a modified signal for fuel and ignition tables, target Lambda (AFR), exhaust temperature, knock sensors, and more. It has the ability to correct short term fuel trim and ignition timing errors so even as the boost increases through the whole RPM range the engine mapping remains where it should. Not only does it make a lot of peak power, but it's also a smooth and consistent power gain over the entire RPM band. The Dinan tuner module is the most sophisticated on the market and is the only one that is 50-state legal.

    This kit fits cars with a mechanical wastegate, which was replaced with an electronic one  around production date 6/2013. If your car was produced in June 2013 you should check which one your car has prior to ordering. Installation is plug and play but requires access to the entire engine compartment. The engine computer(s) is part of the intake manifold so access is tight. The Dinan module is installed under the radiator support and the harness has to be run to each computer. Detailed instructions are included but professional installation is strongly advised if you're not used to working around your engine.

    For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The Dinan tuner is worth 3 point towards your Dinan badge.

    This item fits the following BMWs:
    2014+ F22 F23 BMW M235i M235iX
    7/2013-2015 F30 BMW 335i 335i X-Drive MPPK - Sedan
    7/2013-2016 F32 BMW 435i 435i X-Drive MPPK - Coupe
    7/2013-2016 F33 BMW 435i 435i X-Drive MPPK - Convertible
    7/2013-2015 F34 BMW 335i 335i X-Drive MPPK - Gran Turismo
    7/2013-2016 F36 BMW 435i 435i X-Drive MPPK - GranCoupe

    Dinan
    Part #: D440-1641-ST2
    Price: $2385.48 (USD) 
    Direct Ship
    Free Shipping Free Shipping
    Quantity:   
    AC Schnitzer Performance Module

    This Performance Module is a direct plug-in to the existing engine harness for a factory appearance and fitment and an instant power increase without risk. This offers more power and torque without the hassle of an in-depth, time-consuming install! It installs in less than 30 minutes and is completely reversible which makes this the easiest and most effective power upgrade you will ever make on this car. If you're looking for a substantial bump in power output, with minimal downtime for installation, full serviceability, and can be reverted back to stock then the AC Schnitzer power module is the way to go! 

    Schnitzer got it's start racing BMW's in 1967 and has since gone onto win many championships in DTM, WTCC and other touring car series. In 1987 AC Schnitzer started manufacturing custom high performance products for BMW's using their knowledge from years of racing and winning with BMW's. AC Schnitzer offers the highest quality components for your BMW. 

    AC Schnitzer
    Part #: 1100230340-48
    Price: $4695.00 (USD) 
    Direct Ship
    Quantity:   
    AC Schnitzer Performance Module

    This Performance Module is a direct plug-in to the existing engine harness for a factory appearance and fitment and an instant power increase without risk. This offers more power and torque without the hassle of an in-depth, time-consuming install! It installs in less than 30 minutes and is completely reversible which makes this the easiest and most effective power upgrade you will ever make on this car. If you're looking for a substantial bump in power output, with minimal downtime for installation, full serviceability, and can be reverted back to stock then the AC Schnitzer power module is the way to go! Further yet, AC Schnitzer offers a full 24-month warranty!

    Schnitzer got it's start racing BMW's in 1967 and has since gone onto win many championships in DTM, WTCC and other touring car series. In 1987 AC Schnitzer started manufacturing custom high performance products for BMW's using their knowledge from years of racing and winning with BMW's. AC Schnitzer offers the highest quality components for your BMW. 

    AC Schnitzer
    Part #: 1100287310-24
    Price: $3995.00 (USD) 
    Direct Ship
    Quantity:   
    AC Schnitzer Performance Module

    This Performance Module is a direct plug-in to the existing engine harness for a factory appearance and fitment and an instant power increase without risk. This offers more power and torque without the hassle of an in-depth, time-consuming install! It installs in less than 30 minutes and is completely reversible which makes this the easiest and most effective power upgrade you will ever make on this car. If you're looking for a substantial bump in power output, with minimal downtime for installation, full serviceability, and can be reverted back to stock then the AC Schnitzer power module is the way to go! 

    Schnitzer got it's start racing BMW's in 1967 and has since gone onto win many championships in DTM, WTCC and other touring car series. In 1987 AC Schnitzer started manufacturing custom high performance products for BMW's using their knowledge from years of racing and winning with BMW's. AC Schnitzer offers the highest quality components for your BMW. 

     

    AC Schnitzer
    Part #: 1100230350-48
    Price: $4695.00 (USD) 
    Direct Ship
    Quantity:   
    F22 230i, F3X 330i/430i, F2X X3/X4 30i Turner Performance Module PLUG IN AND PLAY WITH POWER!
    Max HP gain = 69  hp
    Max Trq gain =  74 ft-lbs
    Plug And Play Engine Harness!
    More Boost With Factory Driveability!

    This Performance Module is a direct plug in to the existing engine harness for a factory appearance and fitment and an instant 69hp and 74ft-lbs gains with NO DOWNSIDES. These are simply amazing gains! It installs in less than 30 minutes and is completely reversible which makes this the easiest and most effective power upgrade you will ever make on this car. If you're looking for a substantial bump in power output, with minimal downtime for installation, full serviceability, and can be reverted back to stock then the Turner power upgrade is unbeatable!

    Turner's B46/B48 upgrade solution is a tuning module that plugs in ahead of the engine computer on the wiring harness. It's not the run-of-the-mill 'piggy-back' style upgrades you find for less. Inside our module is a sophisticated control unit that is designed to complement and work with the factory ECU. The maps and algorithms within the control unit have been optimized for the B48 engine, sending revised fuel and ignition parameters to the stock ECU to control boost depending on load, engine speed, and other factors. Our control unit integrates seamlessly to extract more power and torque without faults and errors - just smooth power and torque. The harness has factory-style weather-proof plugs to connect in-line with each boost pressure sensor and the camshaft position sensor on the engine.

    All of the factory safeguards remain in place, including overload protection and warm-up protocols to preserve longevity and factory drive-ability. One of the key advantages of this type of system is that it is unaffected by factory BMW updates and service. If BMW updates the computer software to fix any small bugs or issues, the Turner performance upgrade is not lost or overwritten. This is key on new models because BMW is constantly releasing small software updates. All of the factory diagnostics and service access is retained. The Turner Module is undetectable to plug-in diagnostic readers and it leaves no traces behind. A valet connector is included and installs in minutes to bypass the performance module and revert the car to factory settings. With the valet plug installed the engine computer will use the stock maps instead of getting modified data from the Turner module.

    This item fits the following BMWs:
    2017+  F22 BMW  230i 230iX
    2017+  F30 BMW  330i 330iX - Sedan
    2017+  F34 BMW  330iX - Gran Turismo
    2017+  F32 BMW  430i 430iX - Coupe
    2017+  F33 BMW  430i 430iX - Convertible
    2017+  F36 BMW  430i 430iX - Gran Coupe
    2017+  F25 BMW  X3 xDrive30i
    2017+  F26 BMW  X4 xDrive30i
    Turner Motorsport
    Part #: TPM-B48
    Price: $689.00 (USD) 
    Ships in 2 Days
    Free Shipping Free Shipping
    F22 M235i, F3X 335i/435i, F2X X3/X4 35i, F87 M2 Turner Power Module Kit PLUG IN AND PLAY WITH POWER!
    Max HP gain = 72 hp
    Max Trq gain = 90 ft-lbs
    Plug And Play Engine Harness!
    More Boost With Factory Driveability!

    This Performance Module is a direct plug in to the existing engine harness for a factory appearance and fitment and an instant 72hp and 90ft-lbs gains with NO DOWNSIDES. These are simply amazing gains! It installs in less than 30 minutes and is completely reversible which makes this the easiest and most effective power upgrade you will ever make on this car. If you're looking for a substantial bump in power output, with minimal downtime for installation, full serviceability, and can be reverted back to stock then the Turner power upgrade is unbeatable!

    Turner's N55 upgrade solution is a tuning module that plugs in ahead of the engine computer on the wiring harness. It's not the run-of-the-mill 'piggy-back' style upgrades you find for less. Inside our module is a sophisticated control unit that is designed to complement and work with the factory ECU. The maps and algorithms within the control unit have been optimized for the N55 engine, sending revised fuel and ignition parameters to the stock ECU to control boost depending on load, engine speed, and other factors. Our control unit integrates seamlessly to extract more power and torque without faults and errors - just smooth power and torque. The harness has factory-style weather-proof plugs to connect in-line with each boost pressure sensor and the camshaft position sensor on the engine.

    All of the factory safeguards remain in place, including overload protection and warm-up protocols to preserve longevity and factory drive-ability. One of the key advantages of this type of system is that it is unaffected by factory BMW updates and service. If BMW updates the computer software to fix any small bugs or issues, the Turner performance upgrade is not lost or overwritten. This is key on new models because BMW is constantly releasing small software updates. All of the factory diagnostics and service access is retained. The Turner Module is undetectable to plug-in diagnostic readers and it leaves no traces behind. A valet connector is included and installs in minutes to bypass the performance module and revert the car to factory settings. With the valet plug installed the engine computer will use the stock maps instead of getting modified data from the Turner module.

    Click here for installation instructions.

    This item fits the following BMWs:
    2014+ F22 BMW M235i M235iX
    2012+ F30 BMW 335i 335iX - Sedan
    2014+ F34 BMW 335iX - Gran Turismo
    2014+ F32 BMW 435i 435iX - Coupe
    2014+ F33 BMW 435i 435iX - Convertible
    2014+ F36 BMW 435i 435iX - Gran Coupe
    2011+ F25 BMW X3 xDrive35i
    2014+ F26 BMW X4 xDrive35i
    2016+ F87 BMW  M2
    Turner Motorsport
    Part #: TPM-N55
    Price: $689.00 (USD) 
    In Stock
    Free Shipping Free Shipping
    DINANTRONICS Stage 4 Performance Tuner - F2x/F3x 28i N20 w/ big turbo, intake, and exhaust upgrades

    The Dinan tuner box plugs into the existing sockets on your engine computers The original wiring harness plugs into the Dinan tuner box. There is no cutting or splicing into wires and the whole harness is completely reversible at any time.

    Because the Dinantronics module plugs directly into the engine computer, it can control the data from every sensor on the engine - not just the two or three that other piggyback-style modules use. Instead of only modifying a boost and RPM sensor, the Dinan power module sends a modified signal for fuel and ignition tables, target Lambda (AFR), exhaust temperature, knock sensors, and more. It has the ability to correct short term fuel trim and ignition timing errors so even as the boost increases through the whole RPM range the engine mapping remains where it should. Not only does it make a lot of peak power, but it's also a smooth and consistent power gain over the entire RPM band. The Dinan tuner module is the most sophisticated on the market and is the only one that is 50-state legal.

    This kit fits cars with a mechanical wastegate, which was replaced with an electronic one  around production date 6/2013. If your car was produced in June 2013 you should check which one your car has prior to ordering. Installation is plug and play but requires access to the entire engine compartment. The engine computer(s) is part of the intake manifold so access is tight. The Dinan module is installed under the radiator support and the harness has to be run to each computer. Detailed instructions are included but professional installation is strongly advised if you're not used to working around your engine.

    For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The Dinan tuner is worth 3 point towards your Dinan badge.

    This item fits the following BMWs:
    BMW F2x/F3x 28i N20 w/ big turbo, intake, and exhaust upgrades

    Dinan
    Part #: D440-1632-ST4
    Price: $2112.53 (USD) 
    Direct Ship
    Quantity:   
    Dinan
    Part #: D440-1652-ST1
    Price: $1099.00 (USD) 
    Direct Ship
    Quantity:   
    DINANTRONICS Sport Performance Tuner - B58

    This boost controller was designed from the beginning to be easily installed and even easier to use. It plugs into a sensor and uses the factory DME to re-map boost, timing, and fuel maps. Changes can be made via Bluetooth, allowing you to use your smartphone to turn boost up for max performance or down for conservative driving. The app contains a live boost monitor that streams data in real time.

    • Up to 40HP/50lb/ft gain
    • Easy installation
    • Adjust boost via free Bluetooth app
    • Live, real-time streaming boost data on your smartphone
    • Worth 1 point toward your Dinan badge

    For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install this Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a one year warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere.

    Note: Dinan's one year warranty on DINANTRONICS Sport modules covers the product itself, and not damage related to misuse or associated labor costs.

    Dinan
    Part #: D440-0047
    Price: $307.97 (USD) 
    Direct Ship
    Quantity:   
    AC Schnitzer Performance Module

    This Performance Module is a direct plug-in to the existing engine harness for a factory appearance and fitment and an instant power increase without risk. This offers more power and torque without the hassle of an in-depth, time-consuming install! It installs in less than 30 minutes and is completely reversible which makes this the easiest and most effective power upgrade you will ever make on this car. If you're looking for a substantial bump in power output, with minimal downtime for installation, full serviceability, and can be reverted back to stock then the AC Schnitzer power module is the way to go! 

    Schnitzer got it's start racing BMW's in 1967 and has since gone onto win many championships in DTM, WTCC and other touring car series. In 1987 AC Schnitzer started manufacturing custom high performance products for BMW's using their knowledge from years of racing and winning with BMW's. AC Schnitzer offers the highest quality components for your BMW. 

    AC Schnitzer
    Part #: 110082360-48
    Price: $3895.00 (USD) 
    Direct Ship
    Quantity:   
    F22 M240i, F3X 340i/440i, F2X X3/X4 40i Turner Power Module Kit PLUG IN AND PLAY WITH POWER!
    Max HP gain =  91 hp
    Max Trq gain =  96 ft-lbs
    Plug And Play Engine Harness!
    More Boost With Factory Driveability!

    This Performance Module is a direct plug in to the existing engine harness for a factory appearance and fitment and an instant 91hp and 96ft-lbs gains with NO DOWNSIDES. These are simply amazing gains! It installs in less than 30 minutes and is completely reversible which makes this the easiest and most effective power upgrade you will ever make on this car. If you're looking for a substantial bump in power output, with minimal downtime for installation, full serviceability, and can be reverted back to stock then the Turner power upgrade is unbeatable!

    Turner's B58 upgrade solution is a tuning module that plugs in ahead of the engine computer on the wiring harness. It's not the run-of-the-mill 'piggy-back' style upgrades you find for less. Inside our module is a sophisticated control unit that is designed to complement and work with the factory ECU. The maps and algorithms within the control unit have been optimized for the B58 engine, sending revised fuel and ignition parameters to the stock ECU to control boost depending on load, engine speed, and other factors. Our control unit integrates seamlessly to extract more power and torque without faults and errors - just smooth power and torque. The harness has factory-style weather-proof plugs to connect in-line with each boost pressure sensor and the camshaft position sensor on the engine.

    All of the factory safeguards remain in place, including overload protection and warm-up protocols to preserve longevity and factory drive-ability. One of the key advantages of this type of system is that it is unaffected by factory BMW updates and service. If BMW updates the computer software to fix any small bugs or issues, the Turner performance upgrade is not lost or overwritten. This is key on new models because BMW is constantly releasing small software updates. All of the factory diagnostics and service access is retained. The Turner Module is undetectable to plug-in diagnostic readers and it leaves no traces behind. A valet connector is included and installs in minutes to bypass the performance module and revert the car to factory settings. With the valet plug installed the engine computer will use the stock maps instead of getting modified data from the Turner module.

    Click here for installation instructions.

    This item fits the following BMWs:
    2017+  F22 BMW  M240i M240iX
    2017+  F30 BMW  340i 340iX - Sedan
    2017+  F34 BMW  340iX - Gran Turismo
    2017+  F32 BMW  440i 440iX - Coupe
    2017+  F33 BMW  440i 440iX - Convertible
    2017+  F36 BMW  440i 440iX - Gran Coupe
    2017+  F25 BMW  X3 xDrive40i
    2017+  F26 BMW  X4 xDrive40i
    Turner Motorsport
    Part #: TPM-B58
    Price: $689.00 (USD) 
    Ships in 2 Days
    Free Shipping Free Shipping
    DINANTRONICS Sport Performance Tuner - F-Chassis N20/N55

    This boost controller was designed from the beginning to be easily installed and even easier to use. It plugs into a sensor and uses the factory DME to re-map boost, timing, and fuel maps. Changes can be made via Bluetooth, allowing you to use your smartphone to turn boost up for max performance or down for conservative driving. The app contains a live boost monitor that streams data in real time.

    • Up to 30HP/40lb/ft gain
    • Easy installation
    • Adjust boost via free Bluetooth app
    • Live, real-time streaming boost data on your smartphone
    • Worth 1 point toward your Dinan badge

    For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install this Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a one year warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere.

    Note: Dinan's one year warranty on DINANTRONICS Sport modules covers the product itself, and not damage related to misuse or associated labor costs.

    Dinan
    Part #: D440-0010
    Price: $307.97 (USD) 
    In Stock
    Quantity:   
    N55 MPPK 7/2013+ DINANTRONICS Stage 1 Performance Tuner

    The Dinantronics Power Module is the least invasive way of getting more power from your F10/F30 35i. The Dinan tuner box plugs into the existing sockets on your engine computer(s). The original wiring harness plugs into the Dinan tuner box. There is no cutting or splicing into wires and the whole harness is completely reversible at any time. Dinan has shown a gain of 38hp and 59ft-lbs of torque with this system on the M235 and 335/435/535 with the factory M Performance Power Pack.

    Because the Dinantronics module plugs directly into the engine computer, it can control the data from every sensor on the engine - not just the two or three that other piggyback-style modules use. Instead of only modifying a boost and RPM sensor, the Dinan power module sends a modified signal for fuel and ignition tables, target Lambda (AFR), exhaust temperature, knock sensors, and more. It has the ability to correct short term fuel trim and ignition timing errors so even as the boost increases through the whole RPM range the engine mapping remains where it should. Not only does it make a lot of peak power, but it's also a smooth and consistent power gain over the entire RPM band. The Dinan tuner module is the most sophisticated on the market and is the only one that is 50-state legal.

    Installation is plug and play but requires access to the entire engine compartment. The engine computer(s) is part of the intake manifold so access is tight. The Dinan module is installed under the radiator support and the harness has to be run to each computer. Detailed instructions are included but professional installation is strongly advised if you're not used to working around your engine.

    For over 35 years, Dinan has been America's premier tuning company, pioneering advancements in BMW modification while retaining a focus on balanced performance that preserves the original character and driving feel that a BMW offers. When you install a Dinan part on your car, know that it's not only carefully developed and tested, but that Dinan stands behind it with a four year, 50,000-mile warranty. Dinan believes so fully in their “total package” approach that once your car has been fitted with enough of their parts, they celebrate your conversion from stock to Dinan with an exclusive trunk badge, displayed proudly by BMW enthusiasts everywhere. The Dinan tuner is worth 3 point towards your Dinan badge.

    This item fits the following BMWs with the electronic wastegate:
    2014+ F22 F23 BMW M235i M235iX
    7/2013-2015 F30 BMW 335i 335i X-Drive - Sedan
    7/2013-2016 F32 BMW 435i 435i X-Drive - Coupe
    7/2013-2016 F33 BMW 435i 435i X-Drive - Convertible
    7/2013-2015 F34 BMW 335i 335i X-Drive - Gran Turismo
    7/2013-2016 F36 BMW 435i 435i X-Drive - GranCoupe
    7/2013+ F10 BMW 535i 535xi

    Dinan
    Part #: D440-1641-ST1
    Price: $2120.77 (USD) 
    Direct Ship
    Free Shipping Free Shipping
    Quantity:   
    AFE SCORCHER GT Module -- B46/B58 330i,340,430,440,230,M240 i/xi

    There's no secret to getting additional power from a turbo engine - turn up the boost! But it's easy to take things too far and become "boost drunk". If what you're after is a generous bump in power without worrying about reliability, compromises, or additional modifications the aFe Power Scorcher is perfect for you. We've tried the Scorcher in a number of different BMWs and can report back that it works flawlessly! 

    The Scorcher is a plug-and-play tuning module that installs on the engine wiring harness and modifies the signals from the manifold pressure sensors. The new signals are then sent to the engine computer which increases boost based on the modified signal. The power gains are instantly noticeable and the module has been fully engineered to deliver a smooth and reliable power boost over all RPM. aFe developed this module upgrade on their in-house Mustang and Dynojet dynos. There are other products that give more power (for additional cost and complexity) but more boost also brings more complications. This is all of the power you need without additional drama and trickery. The Scorcher can be used on its own or combined with other aFe Power products for the total package. 

    The install is very easy with no cutting or modification to existing components. Unplug the harness from your MAP sensors and plug it into the Scorcher module. Then plug the Scorcher harness into the MAP sensors. Mount the module wherever you wish (Velcro and zip ties included). A blue LED lets you know the module is plugged in correctly and functioning. You can also revert back to stock just as easily! The Scorcher is built with a 0.1% tolerance on critical components. Each connector is an OE type for the best and most secure fitment and they use high quality wiring with excellent heat and chemical resistance. The module box is aluminum with a hardcoat anodize finish. This is way beyond the other 'resistor in a box' products on the market. aFe warranties the complete unit for two years. 

    This module features on-the-fly power adjustment using a single button controller that effortlessly adjusts from multiple modes of power control, including stock, sport, sport +, and race!

    Features: 

    • Direct Plug In, 30 minute installation
    • +50 HP / +72 lbs. x ft. torque max gains
    • Improved throttle response across a broad power band
    • Reduced turbo lag
    • OE style "all weather" connectors with automotive grade TXL high heat and chemical resistant wire
    • Output protection on all signals
    • Blue L.E.D. power light
       

    Fitment:

    2016+ F30/1/4 BMW 330i/ix 340i/ix  w/ B46/58 engine
    2016+ F32/3/6 BMW 430i/ix 440i/ix  w/ B46/58 engine
    2016+ F22/23 BMW 230i/ix M240i/ix  w/ B46/58 engine

    AFE
    Part #: 77-46318
    Price: $499.00 (USD) 
    Direct Ship
    Quantity:   
    F22 228i, F3X 328i/428i Turner Performance Tuning Module PLUG IN AND PLAY WITH POWER!
    Max HP gain = 50 hp
    Max Trq gain = 70 ft-lbs
    Plug And Play Engine Harness!
    More Boost With Factory Driveability!


    This Performance Module is a direct plug in to the existing engine harness for a factory appearance and fitment and an instant 50hp and 70ft-lbs gains with NO DOWNSIDES. These are simply amazing gains! It installs in less than 30 minutes and is completely reversible which makes this the easiest and most effective power upgrade you will ever make on this car. If you're looking for a substantial bump in power output, with minimal downtime for installation, full serviceability, and can be reverted back to stock then the Turner power upgrade is unbeatable!

    Turner's N20 upgrade solution is a tuning module that plugs in ahead of the engine computer on the wiring harness. It's not the run-of-the-mill 'piggy-back' style upgrades you find for less. Inside our module is a sophisticated control unit that is designed to complement and work with the factory ECU. The maps and algorithms within the control unit have been optimized for the N20 engine, sending revised fuel and ignition parameters to the stock ECU to control boost depending on load, engine speed, and other factors. Our control unit integrates seamlessly to extract more power and torque without faults and errors - just smooth power and torque. The harness has factory-style weather-proof plugs to connect in-line with each boost pressure sensor and the camshaft position sensor on the engine.

    All of the factory safeguards remain in place, including overload protection and warm-up protocols to preserve longevity and factory drive-ability. One of the key advantages of this type of system is that it is unaffected by factory BMW updates and service. If BMW updates the computer software to fix any small bugs or issues, the Turner performance upgrade is not lost or overwritten. This is key on new models because BMW is constantly releasing small software updates. All of the factory diagnostics and service access is retained. The Turner Module is undetectable to plug-in diagnostic readers and it leaves no traces behind. A valet connector is included and installs in minutes to bypass the performance module and revert the car to factory settings. With the valet plug installed the engine computer will use the stock maps instead of getting modified data from the Turner module.

    This item fits the following BMWs:
    2014+ F22 BMW 228i 228iX
    2012+ F30 BMW 328i 328iX - Sedan
    2012+ F31 BMW 328i 328iX - Wagon
    2014+ F34 BMW 328i 328iX - Gran Turismo
    2014+ F32 BMW 428i 428iX - Coupe
    2014+ F33 BMW 428i 428iX - Convertible
    2014+ F36 BMW 428i 428iX - Gran Coupe
    2013+ E84 BMW X1 28i
    2011+ F25 BMW X3 xDrive28i
    2014+ F26 BMW X4 xDrive 28i
    2011+ Z4 BMW Z4 sDrive28i
    Turner Motorsport
    Part #: TPM-N20
    Price: $689.00 (USD) 
    Ships in 2 Days
    Free Shipping Free Shipping
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook