Turbo Upgrades and Kits for BMW 2 Series F22 (2014+)

Clear BMW chassis
test subcategory

P3Cars N20/N55 BMW Boost Tap
P3 Gauges - Corporate Logo
T#:394449
Part#: P3BTAP1
In Stock
Sale - Save 10% $60.00
$54.00
Sale - Save 10% $60.00
$54.00
Upgrade your boost monitoring by adding an analog boost gauge so you can easily tell when there are performance issue's or showing you the power your car is putting out.
Genuine BMW Wastegate Pressure Converter - 11747626351
Genuine BMW - Corporate Logo
T#:37531
Part#: 11747626351
In Stock
16% off MSRP $184.32
$154.28
Free Shipping
16% off MSRP $184.32
$154.28
Free Shipping

OE Wastegate from BMW that regulates the vacuum/boosts levels of the exhaust. If this fails, it could severely disrupt performance and regular engine operation.
When doing any sort of repair or maintenance there is no replacement for genuine factory parts. Turner Motorsport carries the Genuine BMW brand with pride and has the parts you need to complete your next project with confidence.


Genuine BMW Pressure Converter
This item fits the following BMW Chassis:
E70 X5M,E71 X6M,E70 X5,E71 X6,E82,E89 Z4,E90,E92,E93,F02,F06,F10,F12,F13,F15,F16,F22,F25 X3,F26 X4 X4,F30,F31,F32,F33,F34,F36

Fits BMW Engines including:
N20,N26,N55,N63N,S63,S63N

Dinan N55 Big Turbo Upgrade - F22 F3X N55 (Electronic Wastegate)
Dinan - Corporate Logo
T#:403061
Part#: D-310-0110A
Direct Ship
$1,749.00
$1,749.00

For the racing enthusiast or those just looking for the best, this is the ultimate upgrade to fully maximize the power output of your EWG N55 engine. The compressor wheel inside the turbocharger is increased in size allowing ~30% greater flow thus enabling additional boost pressures at higher engine speeds while retaining efficiency.These are fully cast turbos that are manufactured to Dinan specifications along with an upgraded thrust system over the stock turbo to ensure reliable and prolonged life. In order to attain maximum advertised power gains these big turbos will need to be paired with DINANTRONICS Stage 4, as well as DinanaEURtms intercooler to fully regulate the boost increase and deliver a polished product although the exhaust and intake are also recommended.

Benefits of the Dinan Big Turbo for the EWG N55 Engine:

  • Fully cast turbo that is manufactured to Dinan specifications with an upgraded thrust system thereby avoiding lengthy turnaround times caused by a core exchange program.
  • Larger billet compressor/impeller wheel that allows ~30% greater flow over stock which then enables additional boost to be realized while retaining efficiency.
  • Turbo assembly is compatible with electric wastegate vehicles only.
  • Peak power: 445 HP @ 6000 RPM and 455 ft-lbs @ 3000 RPM and a max gain of 128 HP @ 6000 RPM and 113 ft-lbs @ 6000 RPM when coupled with other Dinan Performance upgrades. (Data from F22 M235i.) 448 HP @ 6500 RPM and 417 ft-lbs @ 3000 RPM and a max gain of 152 HP @ 6500 RPM and 123 ft-lbs @ 6500 RPM when coupled with other Dinan Performance upgrades. (Data from F32 435i. Other variants may differ.)
  • Dinan Installation instructions detail a procedure which is quicker than BMW's turbo replacement procedure saving the end-user money and time at the shop (Applicable to RWD vehicles only).
  • Includes o-rings and gaskets needed for complete installation on a RWD vehicle only. If installing on an xDrive vehicle Dinan P/N D313-0117 is required for additional installation hardware.
  • Factory matching new car warranty (4yr/50k) when run in Dinan specification.
  • 50 State Emissions legal; CARB EO # D-176-49.

N55 Stage 1 Turbo Upgrade
Vargas Turbo Technologies - Corporate Logo
T#:398009
Part#: N55-STG1
Direct Ship
Starting at $1,129.88
Starting at $1,129.88

Vargas Stage 1 N55 turbo upgrade is good up to 425whp with proper tuning and high grade fuel. Vargas N55 turbo is an all-new turbo specially made for Vargas. They build it with a billet compressor wheel of their own design and a stock turbine. It will accept all of the stock water and oil lines and the original diverter valve (upgraded DV is recommended). This kit is a direct bolt-on replacement for the original turbo and necessary if you want to start making big power from the N55.

The stock plastic diverter valve and chargepipe is the weakest point for boost leaks (the plastic cracks). Vargas Turbo recommends upgrading it to a stronger DV design. The aluminum DV designs will hold up to just about any boost level currently available.

Vargas Turbo Technologies has been in business since 1979, offering rebuilt and re-engineered turbo solutions. For the BMW market, they identified a need for both cost-effective turbo replacements and proven turbo upgrades. It's recommended that the rest of the system be upgraded to handle your tuning goals. The final Vargas rebuilt turbos are better than the factory rebuilds and at a lower cost!

Oil Recommendation - modern engine oil is formulated for emissions and to be environmentally friendly. The additives in current oil lowers the oil's ability to withstand high temperatures and stresses, lowering its shear strength and its lubricating properties. Vargas recommends oils with high ZDDP (zinc and phosphorus) content that will better protect and cool the turbo bearings. Examples of high-zinc oils are Red Line Race, Red Line Euro, Motul 300V Racing, Joe Gibbs Racing, Valvoline VR-1 oil, and most Diesel-spec oils that you can buy off-the-shelf. Some oils, especially the Race type, will need more frequent oil changes and may be harmful to catalytic converters.

WHP rating: 425. This rating is used to compare various stage of Vargas turbo kits. There is no advertised horsepower gain with this kit as it depends on your other mods and tuning. The rating is provided as a reference to use in your tuning planning. Custom tuning is recommended to match thIS turbo to your existing mods and upgrades.


N55 Turbocharger install kit
Vargas Turbo Technologies - Corporate Logo
T#:398463
Part#: VTT-N55-INSTL
Direct Ship
$179.00
$179.00

Vargas Turbo has done it again. They've made it even easier for you to get your car back on the road and running right again with your new turbos. They've put together an install kit containing all the components you need to get your new turbos installed properly and efficiently. This means you can get your car back on the road faster and enjoy your new turbos!

Starting in 1978, Vargas Turbo Technologies was built upon the dream of utilizing then-new turbocharger technology to improve the performance of everything from cars to boats. On the cutting edge since the beginning, the company has grown with the industry, servicing diesel and industrial turbochargers. Returning to their hot-rod roots, Vargas has jumped head-first into the BMW performance market, filling a need for high-quality, cost effective turbocharger upgrades for everything from daily-driven street cars to all-out racing machines.

F22/F3X 228/328/428 N20 Vargas Stage 1 Turbo Upgrade
Vargas Turbo Technologies - Corporate Logo
T#:390263
Part#: VTTN20-350
Direct Ship
Starting at $1,499.00
Free Shipping
Starting at $1,499.00
Free Shipping

Vargas Stage 1 N20 turbo upgrade is good up to 350whp with proper tuning and high grade fuel. Vargas N20 turbo is an all-new turbo specially made for Vargas. They build it with a billet compressor wheel of their own design and a stock turbine. It will accept all of the stock water and oil lines and the original diverter valve (upgraded DV is recommended). This kit is a direct bolt-on replacement for the original turbo and necessary if you want to start making big power from the N20.

The stock plastic diverter valve and chargepipe is the weakest point for boost leaks (the plastic cracks). Vargas Turbo recommends upgrading it to a stronger DV design. The aluminum DV designs will hold up to just about any boost level currently available.

Vargas Turbo Technologies has been in business since 1979, offering rebuilt and re-engineered turbo solutions. For the BMW market, they identified a need for both cost-effective turbo replacements and proven turbo upgrades. It's recommended that the rest of the system be upgraded to handle your tuning goals. The final Vargas rebuilt turbos are better than the factory rebuilds and at a lower cost!

Oil Recommendation - modern engine oil is formulated for emissions and to be environmentally friendly. The additives in current oil lowers the oil's ability to withstand high temperatures and stresses, lowering its shear strength and its lubricating properties. Vargas recommends oils with high ZDDP (zinc and phosphorus) content that will better protect and cool the turbo bearings. Examples of high-zinc oils are Red Line Race, Red Line Euro, Motul 300V Racing, Joe Gibbs Racing, Valvoline VR-1 oil, and most Diesel-spec oils that you can buy off-the-shelf. Some oils, especially the Race type, will need more frequent oil changes and may be harmful to catalytic converters.

WHP rating: 350. This rating is used to compare various stage of Vargas turbo kits. There is no advertised horsepower gain with this kit as it depends on your other mods and tuning. The rating is provided as a reference to use in your tuning planning. Custom tuning is recommended to match thIS turbo to your existing mods and upgrades.


Evolution Racewerks Competition Series Front Mount Intercooler, Full Kit - Manual N55
Evolution Racewerks - Corporate Logo
T#:555339
Part#: BM-FMIC007FM
Direct Ship
Starting at $1,469.91
Starting at $1,469.91

Heatsoak is one of the obstacles to making big power from turbocharged engines. The stock intercooler design is commendable for single runs at the stock boost levels, but add any more boost and the system is quickly overwhelmed. As the ECU corrects for heat soak, the boost will be decreased and power reduced. Installing an upgraded intercooler is essential to keeping the engine computer from restraining boost as temperatures climb and helps to maintain boost levels even in the face of elevated turbocharger temperatures. The Evolution Racewerks Competition intercooler is much larger than stock, providing more surface area for cooling air to pass through. Even heat soak at low speeds is reduced, making this a worthwhile addition even for stock or mildly tuned engines.

Available in either Brushed, Polished or Type III Hard Anodized Black, this intercooler looks great and holds up! The hard anodized will not only give your car the stealthy look but will also protect the intercooler fins from damage. Without any reduction in thermal efficiency, hard anodizing will prevent your fins from getting deformed as easily from daily driving or road debris. It also has the added benefit of not drawing attention to the fact that the vehicle has been modified.

The Full Kit consists of everything included in the Standard Kit but adds the Turbo to Intercooler Pipe Kit (TIC Pipe). Increase throttle response, as well as decrease turbo lag, are the benefits of the new TIC Pipe Kit. With the Full Kit, ALL the factory rubber and plastic intercooler pipes will be replaced. You will have full hard piping throughout your system.

Based out of Nevada, Evolution Racewerks stays at the forefront of performance BMW technology and offers top quality aftermarket parts ahead of the competition. Proven performance gains and an exhausting attention to detail is making ER one of the top names in the industry. Backed by countless successful and happy customers with the timesheets to prove it, Evolution Racewerks is a name you can count on when adding reliable horsepower.

Features:

  • Designed specifically to fit (and look good) on the 228i, 328i, and 428i.
  • Large 20"x11"x3" (26"x11"x3" with end tanks) High Density Bar & Plate Construction Intercooler Core
  • Cast end tanks for improved durability and internal flow characteristics.
  • Brush finish standard
  • Optional Polished finish available.
  • Optional Type III Hard Black Anodizing (for stealth) finish on the intercooler, end tanks, and all piping. Hard anodizing helps improve the durability of intercooler fins against damage from road debris (rocks).
  • Features the factory style connectors. Fully compatible with factory piping or aftermarket piping utilizing factory style connectors. Compatible with our charge pipe upgrade kit.
  • Maintains ALL factory components. No modifications required. 100% bolt on.
  • Includes all hardware needed to install.
  • Developed and tested for over a year under the harsh conditions of racing.
  • Limited Lifetime Warranty.

Kit Includes:
1 High-density bar & plate type Competition intercooler
Upgraded turbo intercooler piping with silicone couplers
Upgraded charge pipes with silicone couplers
Installation Hardware

N54/N55 Single turbo head flange (Stainless Steel)
Vargas Turbo Technologies - Corporate Logo
T#:398015
Part#: VTT-FLNG-1-S
Direct Ship
$350.00
$350.00

Looking to go big single turbo? Now you can with this Vargas Turbo N54/N55 flange. Designed to give you the ability to go big single, Vargas Turbo has done it again. Available in mild steel or stainless steel, this flange is perfect for anyone who's looking to step apart from the norm and look to make big power.

Starting in 1978, Vargas Turbo Technologies was built upon the dream of utilizing then-new turbocharger technology to improve the performance of everything from cars to boats. On the cutting edge since the beginning, the company has grown with the industry, servicing diesel and industrial turbochargers. Returning to their hot-rod roots, Vargas has jumped head-first into the BMW performance market, filling a need for high-quality, cost effective turbocharger upgrades for everything from daily-driven street cars to all-out racing machines.


N54/N55 Single turbo head flange (Mild steel)
Vargas Turbo Technologies - Corporate Logo
T#:398016
Part#: VTT-FLNG-1
Direct Ship
$275.00
$275.00

Looking to go big single turbo? Now you can with this Vargas Turbo N54/N55 flange. Designed to give you the ability to go big single, Vargas Turbo has done it again. Available in mild steel or stainless steel, this flange is perfect for anyone who's looking to step apart from the norm and look to make big power.

Starting in 1978, Vargas Turbo Technologies was built upon the dream of utilizing then-new turbocharger technology to improve the performance of everything from cars to boats. On the cutting edge since the beginning, the company has grown with the industry, servicing diesel and industrial turbochargers. Returning to their hot-rod roots, Vargas has jumped head-first into the BMW performance market, filling a need for high-quality, cost effective turbocharger upgrades for everything from daily-driven street cars to all-out racing machines.