Free Shipping on orders $99 and up! Some exclusions apply. Contiguous US only.

BMW F23 Stainless Steel Brake Lines

BMW F23 Stainless Steel Brake Lines Stainless brake lines are a must for any track driven BMW and make a great upgrade on street cars as well. Brake lines should be replaced every few years anyway and braided stainless lines offer an additional layer of protection. Rubber brake lines deteriorate from the outside and inside. The external rubber can become stiff, crack, or get damaged by debris. The stainless braiding and Teflon inner coating help protect the outside of the line from debris. And with a stronger material the line will not expand or swell under extreme braking conditions. Stainless brake lines provide a firmer positive pedal feel under hard braking by greatly reducing the expansion that can be found in stock rubber lines. The internal of old stock rubber lines can become constricted over time even if the exterior looks normal. With a blockage or restriction you can have serious braking issues that often go mis-diagnosed as warped rotors, stuck calipers, or bad ball joints. Make sure you don't overlook your brake lines! All brake lines, rubber or stainless, should be replaced every few years and any time you replace a brake caliper.

These are the highest quality stainless brake lines that meet DOT specs at great prices. Our lines are made with stainless braiding and Teflon inner lines. The fittings are the correct BMW type and sizing and with swaged fittings and an additional rubber boot for protection.
You're currently viewing parts for your (F23) 2-Series Convertible 2014+. Reset your chassis
For accurate results, specify your model below.
F22, F30/F31/F32/F33/F34/F36 Stainless Steel Brake Line Set These braided stainless brake steel lines improve the performance and safety of your BMW's braking system. They are DOT approved, and coated to protect the braided stainless steel from abrasion or road-related damage and offer tremendous quality at a phenomenal price. 

Stoptech® Stainless Steel Braided Brake Lines provide a quicker, firmer, more consistent pedal response by maintaining consistent brake pressure. Additionally, stainless steel lines provide precision brake modulation, especially during threshold braking. The improvement in pedal feel is more dramatic on older vehicles where the factory rubber line may have softened and swelled due to age. 

StopTech® brake lines consist of a PTFE (commonly referred to as Teflon®) inner line that carries the brake fluid, which is then covered with a layer of stainless steel woven braid. The PTFE tube is very resistant to expansion under pressure and will not degrade from exposure to brake fluid. 

The braided stainless steel provides support for the PTFE and the weave is extremely durable against incidental impact and abrasion. Next the stainless braided hose is coated with a clear abrasion resistant PVC cover for maximum protection against chaffing and strain relief devices reinforce end fittings. 
StopTech
Part #: PLBF30F32
Price: $99.00 (USD) 
In Stock
Quantity: