click to Chat Live
Contact YouTube Blog Twitter facebook Turner Motorsport on Instagram
1-800-280-6966
 |   Login
  • 0
 |   Login
Shopping Cart (0) Wishlist
Contact

(0) item(s) in your Shopping Cart
Home
Categories
Specials Gifts & Clothing
  1. Genuine BMW Accessories
  2. Genuine BMW Clothing
  3. Turner Shirts Hats and Gear
  4. Gifts under $25
  5. Gifts under $50
  6. Gifts under $100
  7. Gifts over $100
  8. Gift Certificates
  9. Stocking Stuffers
  10. Gift Packages
Brakes
  1. Brake Overhaul Packages
  2. Brake Pads
  3. Brake Pad Sensors
  4. Brake Rotors
  5. StopTech Big Brake Kits
  6. Stainless Steel Brake Lines
  7. Brake Fluid
  8. Brake Calipers
  9. Caliper Rebuild Kits
  10. Parking Brake Parts
  11. Brake Cooling Ducts & Backing Plates
  12. Brake Pads - Brembo GT BBK Calipers
  13. Brake Pads - StopTech BBK Calipers
Car Care & Accessories
  1. Car Covers
  2. Wheel & Tire Cleaning
  3. Wax, Polish and Cleaning Supplies
  4. Detailing Gear
  5. Leather & Plastic Care
  6. Car Cleaning Supplies
  7. Chassis Paint, Coatings, Sealants, and Rust Conversion
Drivetrain
  1. Differential and Gearing Upgrades
  2. Differential Mounts and Upgrades
  3. OEM Clutch Kits & Clutch Parts
  4. Performance Clutch Kits & Parts
  5. Clutch Parts
  6. UUC Short Shift Kits
  7. Axle Shafts
  8. Performance Short Shift Kits
  9. Transmission Parts
Engine Chips
  1. Performance Flash Software, 2005+ Models
  2. Sprint Booster Drive-by-Wire Module
Engine Parts
  1. Engine Performance Packages
  2. Water Pumps
  3. Thermostats
  4. Radiators & Cooling System Overhaul Kits
  5. Radiator Hoses, Cooling Hoses, & Hose Sets
  6. External Engine Parts
  7. Drive Belts & V-Belts
  8. Gaskets, Gasket Sets, Seals, & O-Rings
  9. Factory-Spec Replacement Turbos and Kits
  10. Crankcase Vent, PCV, and Oil Separator Systems
  11. Turbo Upgrades and Kits
  12. Electrical Sensors, Switches, & Relays
  13. Alternator & Alternator Parts
  14. Fuel System Parts
  15. Internal Engine Parts
Exhaust
  1. Supersprint Performance Exhaust Systems
  2. Performance Headers & Downpipes
  3. Dinan Free Flow Exhaust Systems
  4. Performance Exhaust Systems
  5. Exhaust Muffler Tips
  6. Oxygen Sensor - O2 Sensors
  7. Exhaust Gaskets Hangers and Parts
Exterior / Body
  1. Black Grills
  2. Emblems & Decals for Hood, Trunk, and Wheels
  3. Front Spoilers, Bumper Covers, & Air Dams
  4. Rear Spoilers, Rear Wings, & Aprons
  5. Body Trim Parts & Accessories
  6. License Plate Brackets & License Plate Frames
  7. Mirror Kits & Mirror Parts
  8. Wiper Blades, Wiper Pumps, & Wiper Motor Parts
  9. Hood Pins and AeroCatch Latches
  10. Racing Tow Hooks and Tow Straps
  11. Aero & Body Kits
Intake
  1. aFe Cold-Air Intake Kits
  2. Dinan Cold Air Intake Kits
  3. Gruppe M Cold-Air Intake Kits
  4. aFe Performance Air Filters
  5. K&N Performance Air Filters
  6. Intake Cleaning & Recharging Kits
  7. BOV, Chargepipe, and Intercooler Upgrade Kits
  8. Mass Air Sensor & Air Flow Meters
Interior
  1. Floor Mats
  2. Gauge Kits and Data Acquisition
  3. Auxiliary Input Adaptors for BMW
  4. Pedal Sets
  5. Escort Radar Detectors
  6. Factory Steering Wheels
  7. Racing Steering Wheels
  8. Shift Knobs, Shift Boots, & Shift Handles
  9. Seats & Seat Accessories
  10. Seat Belts and Racing Harnesses
  11. Cup Holders and Storage
  12. Carbon Fiber Interior Parts
  13. Interior Switches and Switchgear
  14. Interior Trim & Accessories
Lighting
  1. Bulbs for Headlights, Turn Signals and Tail Lights
  2. Stealth Bulbs
Maintenance
  1. Routine Maintenance & Tune-Up Packages
  2. Oil Filters & Oil Filter Kits
  3. Air Filters
  4. Cabin Air Filters, Heppa Filters, & Microfilters
  5. Transmission Filter Kits & Transmission Service Parts
  6. Spark Plugs
  7. Service Reset Tools & Fault Code Readers
  8. Anti-Freeze and Coolant
  9. Engine Oils - Genuine BMW and OEM
  10. Power Steering and Hydraulic Fluids
  11. Transmission and Gear Oil - Genuine BMW and OEM
  12. MOTUL Engine Oil and Gear Lubricants
  13. Red Line Oil & Fluids
  14. Liqui-Moly Oil and Additives
Suspension
  1. Shocks & Struts
  2. H&R Performance Springs
  3. Spring & Shock Packages
  4. Bilstein PSS PSS9 PSS10 Coil Over Suspensions
  5. H&R Coil Over Suspensions
  6. KW Coil Over Suspensions
  7. Sway Bar Kits
  8. Sway Bar Links & Sway Bar Parts
  9. Camber / Caster Kits
  10. Control Arm Replacements & Upgrades
  11. Suspension Bushings & Mounts
  12. Tie Rods & Steering Parts
  13. Coil Over Spring Hardware
Wheels
  1. Apex Flow Formed Alloy Wheels
  2. Forgeline Custom Forged Alloy Wheels
  3. HRE FlowForm Performance Alloy Wheels
  4. D Force Flow Formed Alloy Wheels
  5. Original BMW Wheels and Wheel Upgrades
  6. Turner Motorsport Wheel Spacers
  7. ECS Tuning Wheel Spacers
  8. H&R Wheel Spacers
  9. Wheel Bolts, Wheel Studs and Nuts
  10. Wheel Emblems, Caps, and Accessories
  11. High Performance Wheels
Tools
  1. Alignment Tools
  2. Battery Chargers and Tenders
  3. Brake Tools
  4. Coil Over Wrenches
  5. Cylinder Head and VANOS Tools
  6. Fan and Fan Clutch Tools
  7. Fault Code Readers and OBD Scan Tools
  8. Fuel System Tools
  9. Genuine BMW Tool Kits
  10. Oil Service Tools
  11. Sockets
  12. Spark Plug Sockets
  13. Transmission and Differential Tools
  14. Wheel Pin Tools
  15. Workshop Chemicals
Clearance
Choose BMW
BMW 1 Series
  1. (E82) 1-series Coupe 2008+
  2. (E88) 1-series Convertible 2008+
BMW 2 Series
  1. (F22) 2-Series Coupe 2014+
  2. (F23) 2-Series Convertible 2014+
  3. (F87) M2 2016+
BMW 3 Series
  1. (E21) 3-Series 1977-1983
  2. (E30) 3-series 1984-1991
  3. (E30) M3 1988-1991
  4. (E36) 3-series 1992-1999
  5. (E36) M3 1995-1999
  6. (E46) 3-Series 1999-2005
  7. (E46) M3 2001-2006
  8. (E90) 3-Series Sedan 2006-2011
  9. (E90) M3 Sedan 2008-2013
  10. (E91) 3-Series Touring 2006-2013
  11. (E92) 3-Series Coupe 2007-2013
  12. (E92) M3 Coupe 2008-2013
  13. (E93) 3-Series Convertible 2007-2013
  14. (E93) M3 Convertible 2008-2013
  15. (F30) 3-Series Sedan 2012+
  16. (F31) 3-Series Touring 2014+
  17. (F80) M3 2015+
  18. (F34) 3-Series Gran Turismo 2014+
BMW 4 Series
  1. (F32) 4-Series Coupe 2014+
  2. (F33) 4-Series Convertible 2015+
  3. (F34) 4-Series Gran Turismo 2014+
  4. (F82) M4 Coupe 2015+
  5. (F83) M4 Convertible 2015+
  6. (F36) 4-Series Gran Coupe 2015+
BMW 5 Series
  1. (E34) M5 1991-1993
  2. (E39) M5 2000-2003
  3. (E60) M5 2006-2010
  4. (E28) 5-Series 1982-1988
  5. (E34) 5-Series 1989-1995
  6. (E39) 5-Series 1996-2003
  7. (E60) 5-Series Sedan 2004-2010
  8. (E61) 5-Series Touring 2006-2010
  9. (F10) 5-Series 2011+
  10. (G30) 5-Series 2017+
BMW 6 Series
  1. (E24) 6-Series 1977-1989
  2. (E63) 6-Series Coupe 2004-2010
  3. (E64) 6-Series Convertible 2004-2010
  4. (F06) 6-Series Gran Coupe 2013+
  5. (F12) 6-Series Coupe 2011+
  6. (F13) 6-Series Convertible 2011+
BMW 7 Series
  1. (E32) 7-Series 1988-1994
  2. (E38) 7-Series 1995-2001
  3. (E65) 7-Series SWB 2002-2007
  4. (E66) 7-Series LWB 2002-2007
  5. (F01) 7-Series SWB 2009+
  6. (F02) 7-Series LWB 2009+
BMW 8 Series BMW Classics (E9, Bavaria, Isetta, etc)
  1. 2500
  2. 2800
  3. 3.0Si
  4. Bavaria
  5. 2800CS
  6. 3.0CS
  7. 2002
  8. 2002tii
  9. (E12) 528i 1977-1981
  10. (E12) 530i 1975-1978
BMW X Series (SAV)
  1. (E84) X1 Series 2013+
  2. (E83) X3 2004-2010
  3. (F25) X3 2011+
  4. (F26) X4 2015+
  5. (E53) X5 2000-2006
  6. (E70) X5 2007-2013
  7. (F15) X5 2014+
  8. (F85) X5 M 2015+
  9. (E71) X6 2008+
  10. (F16) X6 2015+
  11. (F86) X6 M 2015+
  12. (F48) X1 2016+
  13. (F48) X1 (2016+)
BMW Z Series
  1. (E36/7) Z3 1997-2002
  2. (E85) Z4 M Roadster
  3. (E85/E86/E89) Z4 2003+
  4. (E86) Z4 M Coupe
  5. (E52) Z8 2000-2003
BMW 1600-2002 / tii BMW i Series
  1. (I01) BMW i3 2014+
  2. (I12) BMW i8 2014+
MINI Cooper and Cooper S
Racing
Racing Home Racing News Racing Schedule Racing Photo Gallery
Gallery
Photo Gallery Wallpaper Project Cars
  1. Project i8
  2. Project F80 M3
  3. Turner F82 M4
  4. Turner X5 M
  5. Turner F22 2 Series
  6. Turner F13 M6
  7. Turner F10 M5
  8. Turner F30 335i
  9. Turner E9X M3
  10. Turner E92 335i
  11. Turner E82 1 Series
  12. Turner ActiveE (100% Electric)
  13. Turner E46 M3
  14. Turner E46 330i ZHP
  15. Turner E36 M3
  16. Turner E30 M3
  17. Turner MINI Cooper S
  18. McLaren F1
  19. Turner E92 M3 Lime Rock
  20. Turner F80 M3 Silverstone
Video Gallery
Projects
Turner BMW i8 Turner BMW F80 M3 Turner BMW F82 M4 Turner BMW X5 M Turner BMW F22 2 Series Turner BMW F13 M6 Turner BMW F10 M5 Turner BMW F30 335i Turner BMW E9X M3 Turner BMW E92 335i Turner BMW E82 1 Series Turner BMW ActiveE (100% Electric) Turner BMW E46 M3 Turner BMW E46 330i ZHP Turner BMW E36 M3 Turner BMW E30 M3 Turner MINI Cooper S McLaren F1 Turner BMW E92 M3 Lime Rock Turner BMW F80 M3 Silverstone
About Us
About Turner Motorsport Customer Feedback The Turner Team
  1. Open Positions
Returns Policy Shipping Info Contact Us Privacy Policy Security Policy FAQs

F23 D Force Flow Formed Alloy Wheels

F23 D Force Flow Formed Alloy Wheels D-Force Wheels has been one of the leading innovators in flow-formed alloy wheels for the BMW market. These wheels use a special manufacturing process that is a cross between forging and casting. Flow-forming is a process that results in a stronger wheel than the traditional casting process and less weight than a traditional forged wheel. Many high-quality and OEM wheel manufacturers are moving to this flow forming process. D-Force first gained credibility and fame with BMW CCA Club Racers throughout North America. A light weight, strong, and affordable race wheel proved to be a winning combination. D-Force Wheels are available in two distinct styles: LTW5 - light weight 5-spoke in 17" and 18" sizes and EmPower - light weight multi-spoke 'mesh' style wheel in an 18" size. For wheel information in general, check out our Wheel Tech Guide by clicking here.

LTW5 EmPower
You're currently viewing parts for your (F23) 2-Series Convertible 2014+. Reset your chassis
For accurate results, specify your model below.
17x8.5 - D-Force LWT5 Flat Black Wheel Set - E36 E46 E9x Z3 Z4 Act Quickly! Only 1 sets left at this price!

Wheel Specs
Fitment:Front / Rear
Size:17x8.5"
Offset (mm):40
Weight (lbs):16
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Set of 4 17x8.5" Flat Black Wheels.

This item fits the following BMWs:
1992-1998 E36 BMW 318i 318is 318ti 318ic 323is 323ic 325i 325is 325ic 328i 328is 328ic M3
1999-2005 E46 BMW 323i 323ci 325i 325ci 325xi 328i 328ci 330i 330ci 330xi
2006-2011 E90 BMW 325i 325xi 328i 328xi 328i xDrive 330i 330xi 335d 335i 335xi 335i xDrive - Sedan
2006-2012 E91 BMW 325xi 328i 328xi 328i xDrive - Wagon
2007-2013 E92 BMW 328i 328xi 328i xDrive 335i 335is 335xi 335i xDrive - Coupe
2007-2013 E93 BMW 328i 335i - Convertible
1996-2002 Z3 BMW Z3 1.9 Z3 2.3 Z3 2.5i Z3 2.8 Z3 3.0i
2003-2008 E85 BMW Z4 2.5i Z4 3.0i Z4 3.0si
Part #: TMS200172
Price: $1039.80 (USD) 
Quantity:   
D-Force LTW5 17x8.5
Wheel Specs
Fitment:Front / Rear
Size:17x8.5"
Offset (mm):40
Weight (lbs):16
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
Part #: TMS184573
Price: $259.95 (USD) 
Quantity:   
D-Force LTW5 17x8.5
Wheel Specs
Fitment:Front / Rear
Size:17x8.5"
Offset (mm):40
Weight (lbs):16
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
Part #: TMS184572
Price: $259.95 (USD) 
Free Shipping Free Shipping
Quantity:   
D-Force LTW5 17x8.0
Wheel Specs
Fitment:Front / Rear
Size:17x8.0"
Offset (mm):40
Weight (lbs):15.5
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
Part #: LTW517x8-A-ET40
Price: $249.95 (USD) 
Quantity:   
D-Force LTW5 17x8.5

Wheel Specs

Fitment:Front / Rear

Size:17x8.5"

Offset (mm):40

Weight (lbs):16

Profile:Flat

 

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.

Part #: TMS184575
Price: $259.95 (USD) 
Quantity:   
D-Force EmPower 18x8.5
Wheel Specs
Fitment:Front / Rear
Size:18x8.5"
Offset (mm):40
Weight (lbs):19
Profile:Flat

These mesh wheels come from the same manufacturer of the popular LTW5 wheels. Which means they are some of the strongest and lightest wheels you can find for your BMW. They also look amazing with the mesh "Y-spoke" design and polished outer lip blending with your BMW for a classis appearance. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. EmPower wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The EmPower uses the classic mesh pattern found on so many other German wheels and are a natural complement to BMW's heritage and styling cues. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
Part #: TMS184593
Price: $319.95 (USD) 
Quantity:   
D-Force EmPower 18x8.5
Wheel Specs
Fitment:Front / Rear
Size:18x8.5"
Offset (mm):40
Weight (lbs):19
Profile:Flat

These mesh wheels come from the same manufacturer of the popular LTW5 wheels. Which means they are some of the strongest and lightest wheels you can find for your BMW. They also look amazing with the mesh "Y-spoke" design and polished outer lip blending with your BMW for a classis appearance. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. EmPower wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The EmPower uses the classic mesh pattern found on so many other German wheels and are a natural complement to BMW's heritage and styling cues. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
Part #: TMS184592
Price: $319.95 (USD) 
Quantity:   
D-Force LTW5 17x8.0
Wheel Specs
Fitment:Front / Rear
Size:17x8.0"
Offset (mm):40
Weight (lbs):15.5
Profile:Flat

LTW5 wheels are some of the strongest and lightest wheels you can find for your BMW. It's no wonder that you'll find so many cars at track events with LTW5 wheels. Through advanced engineering and manufacturing methods D Force has created a lightweight wheel that can also withstand the stresses and rigors of a racetrack. D-Force were pioneers in the flow-forming casting technology that results in wheel stronger and lighter than other cast wheels. LTW5 wheels are typically over 10lbs lighter than a factory BMW wheel! With less weight the car is able to accelerate faster, the brakes are more responsive, and the suspension can react quicker which is especially helpful in transitions and autocross. The LTW5 style uses a classic 5-spoke design with clean simple good looks and generous sizing for big brakes. They're also easy to clean! Multiple color and profile options allow you to set just the right look and stance for your car. As well as being pleasing to the eye these are very strong and functional wheels that are at home on the street as well as the racetrack.

These D-Force wheels use the BMW standard 5/120 bolt pattern and with a 72.6mm center bore. They are a direct fit to most any 3-series (E36, E46, E90, E92, F30), Z3, and Z4-series BMWs. The original BMW center cap, TPMS sensors, and original lug bolts are all carried over from your original wheels (wheel bolts may vary if spacers are used). They come in a wide variety of diameter, width, and offset combinations which gives you multiple fitment and application opportunities. For street use we generally recommend a staggered setup with a rear wheel slightly wider than the front. For track and racing applications a square setup is desired with the same width in the front and rear. Wheel offsets may also vary based on the clearances and stance you wish to achieve. Refer to our image gallery for inspiration. If you'd like more input give us a call or e-mail and we'd be happy to go over the many options with you.

Note: careful consideration of wheel width, offset and tire sizing must be observed when choosing and installing larger wheels. Adding larger wheels may lead to rubbing on suspension components or bodywork. Wheel spacers, new alignment settings, inside fender modifications, or other adjustments may be required. For additional resources on wheel fitments, refer to our Wheel Guide page (http://www.turnermotorsport.com/t-wheel_guide.aspx) or give us a call or e-mail.

Sold per wheel.
Part #: LTW517x8-S-ET40
Price: $249.95 (USD) 
Quantity:   
Get notified about money saving
specials & deals for your BMW
enter your email address
  • 22 years of BMW Tuning.
  • Award winning service.
  • 10,000's of parts in stock.
  • Quality BMW Parts only.
  • Hassle-free returns.

  • Find us on Facebook




    • 1-800-280-6966
      Mon-Thur 9am-6pm ET, Fri 9am-5pm ET

      • © TurnerMotorsport.com 1993-2017. All Rights Reserved.