BMW Carbon Fiber Trunk Lids for BMW 3 Series F30 (2012+)

Clear BMW chassis
Not only do these trunk lids provide a cosmetic enhancement in appearance, but they offer a considerable weight savings over the heavy steel factory BMW trunk lid. If you're after either weight savings for your BMW, a visual improvement, or BOTH, a carbon fiber trunk lid is a good option to consider.

Carbon fiber front strut bar - F30, F32 3 series
Carbon fiber front strut bar - F30, F32 3 series
Founded in 2003 Seibon Carbon excels in delivering premiu...
Seibon - Corporate Logo
T#:396311
Part#: SB1213BMWF30
Direct Ship
$680.00
$680.00

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2012-2017 BMW F30 All
2014-2017 BMW F32 All

Seibon CSL style carbon fiber trunk - F30 3 series
Seibon CSL style carbon fiber trunk - F30 3 series
Founded in 2003 Seibon Carbon excels in delivering premiu...
Seibon - Corporate Logo
T#:397104
Part#: TL1213BMWF30CS
Direct Ship
$850.00
$850.00

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2012+ F30 3 Series Sedan 320i 320i ed 320iX 328i 328iX 328i 328iX 335i 335iX 340i 340ix Hybrid 3

Seibon CSL style carbon fiber trunk - F30 3 series
Seibon CSL style carbon fiber trunk - F30 3 series
Founded in 2003 Seibon Carbon excels in delivering premiu...
Seibon - Corporate Logo
T#:397103
Part#: TL1213BMWF30C
Direct Ship
$850.00
$850.00

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2012+ F30 3 Series Sedan 320i 320i ed 320iX 328i 328iX 328i 328iX 335i 335iX 340i 340ix Hybrid 3


Seibon OE style carbon fiber trunk - F30 3 series
Seibon OE style carbon fiber trunk - F30 3 series
Founded in 2003 Seibon Carbon excels in delivering premiu...
Seibon - Corporate Logo
T#:397102
Part#: TL1213BMWF30
Direct Ship
$816.00
$816.00

Founded in 2003 Seibon Carbon excels in delivering premium quality carbon fiber products to those with discerning tastes. The process begins with the best carbon raw material manufactured in either USA or France; in fact it is the same stock that can be found on high performance racecars, battleships and satellites. Supporting race teams is one of Seibons' specialties and you will see their work in many different platforms and racing types. Drivers such as Michele Abbate in her Scion FRS racecar, Fredric Aasbo in his Formula D Scion tC and even team RS-R in Asian Formula D all rely solely on Seibon to get them to the podium.

Using single piece construction, the carbon is laid inside of a mold instead of being wrapped around it. This allows for a much stronger piece in the end and allows much greater control when the resin is applied. Areas such as door hinges, hood latches and window regulator mounting points are reinforced so as to add strength and longevity through repeated use. Application of the resin is then accomplished using proprietary techniques that allow for a much more uniform coating than most competitors and yields a product that is lighter, since there is no excess.

Finally the product is finished with a glossy clear coat this resists chipping and cracking and gives a glossy wet look. Inspection of the finished product is then performed to ensure there is no weave distortion in tight corners or complex bends.

Features:

  • Proprietary methods to lay wet carbon for a stronger and lighter product
  • UV resistant resins, even a weathered part can be wet sanded and brought back to original finish
  • Panels are 70% lighter than stock as opposed to competitors which come in around 50% lighter than stock.
  • No black paint is used to hide imperfections along detail edges and creases.
  • Partnered with SCCA and Formula Drift bringing their top quality fit and finish to the competition environment.

This item fits the following BMWs:
2012+ F30 3 Series Sedan 320i 320i ed 320iX 328i 328iX 328i 328iX 335i 335iX 340i 340ix Hybrid 3


Select Vehicle

Category

  • Carbon Fiber Trunk Lids

Price

$
$